Complete ye table of values

The mean of the new data set is 35 and the standard deviation is approximately 7.07.

The mean of the new data set is equal to the mean of the original data set plus 10, which is 25 + 10 = 35.

To find the standard deviation of the new data set, you can use the same formula as before:

Step 1: Calculate the mean of the data set

Mean = (40 + 30 + 45 + 35 + 25) / 5 = 35

Step 2: Calculate the deviation of each data point from the mean

Deviation of 40 from the mean = 40 - 35 = 5

Deviation of 30 from the mean = 30 - 35 = -5

Deviation of 45 from the mean = 45 - 35 = 10

Deviation of 35 from the mean = 35 - 35 = 0

Deviation of 25 from the mean = 25 - 35 = -10

Step 3: Square each deviation

Squared deviation of 5 = 5² = 25

Squared deviation of -5 = (-5)² = 25

Squared deviation of 10 = 10² = 100

Squared deviation of 0 = 0² = 0

Squared deviation of -10 = (-10)² = 100

Step 4: Calculate the variance by taking the average of the squared deviations

Variance = (25 + 25 + 100 + 0 + 100) / 5 = 50

Step 5: Take the square root of the variance to get the standard deviation

Standard deviation = 7.07

Therefore, the mean of the new data set is 35 and the standard deviation is approximately 7.07.

Read more on mean and standard deviation here: https://brainly.com/question/24298037

#SPJ1

The equilibrium price is $90 and the equilibrium quantity is 630 items.

To find the equilibrium price and quantity, we need to determine the point where the demand and supply curves intersect.

Calculate the slope of the demand curve:

Slope of demand = (Quantity demanded at $120 - Quantity demanded at $70) / ($120 - $70)

= (570 - 720) / (120 - 70)

= -150 / 50

= -3

Calculate the slope of the supply curve:

Slope of supply = (Quantity supplied at $120 - Quantity supplied at $70) / ($120 - $70)

= (840 - 490) / (120 - 70)

= 350 / 50

= 7

Set the demand and supply equations equal to each other:

Quantity demanded = Quantity supplied

(-3P + b) = (7P + c)

Solve for the equilibrium price:

-3P + b = 7P + c

-10P = c - b

P = (c - b) / -10

Step 5: Substitute the values of demand and supply at $70 to find b:

720 = -3(70) + b

720 = -210 + b

b = 930

Substitute the values of demand and supply at $120 to find c:

570 = -3(120) + c

570 = -360 + c

c = 930

Calculate the equilibrium price:

P = (930 - 930) / -10

P = 0

Substitute the equilibrium price into either the demand or supply equation to find the equilibrium quantity:

Quantity demanded = -3(0) + 930

Quantity demanded = 930

Thus, the equilibrium price is $90 and the equilibrium quantity is 630 items.
For more questions like Demand click the link below:

https://brainly.com/question/29703449

#SPJ11

49 and 64 are perfect squares, while 23 and 41 are not.

-If we are asked to identify a statement that is true for all of the integers 23, 41, 49, 64, one possible correct statement is: All of the integers are greater than 20.

-If we are asked to identify a statement that is false for all of the integers 23, 41, 49, 64, one possible correct statement is: All of the integers are perfect squares.

-If we are asked to identify a statement that is true for some of the integers 23, 41, 49, 64 and false for others, one possible correct statement is: Only one of the integers is a prime number. In this case, 23 and 41 are prime, while 49 and 64 are not.

-If we are asked to identify a statement that is true for any two of the integers 23, 41, 49, 64 and false for the other two, one possible correct statement is: Exactly two of the integers are perfect squares. In this case, 49 and 64 are perfect squares, while 23 and 41 are not.

To know more about "Perfect squares" refer here:

https://brainly.com/question/1746559#

#SPJ11

For each value of x, y varies from x to 7. We can now evaluate the integral using this new order of integration.

The given integral is:

∫ from 0 to 7, ∫ from 0 to y, f(x, y) dx dy

To switch the order of integration, we need to sketch the region of integration.

The region of integration is the triangle bounded by the x-axis, y-axis, and the line y = 7. Therefore, we can rewrite the integral as:

∫ from 0 to 7, ∫ from x to 7, f(x, y) dy dx

This is because for each value of x, y varies from x to 7.

To sketch the region of integration, we draw the line y = 7 and the x-axis. Then, we draw a vertical line at x = 0 and a diagonal line from the origin to the point (7, 7) on the line y = 7. The region of integration is the triangular region bounded by these lines.

Switching the order of integration, the integral becomes:

∫ from 0 to 7, ∫ from x to 7, f(x, y) dy dx

This means that for each value of x, y varies from x to 7. We can now evaluate the integral using this new order of integration.

Learn more about integration here

https://brainly.com/question/30215870

#SPJ11

The maximum number of pounds of cotton candy grapes Michaela can buy without spending more than $20 is 4 pounds. The options that solve the problem are 3, 4 and 5

Michaela's favorite fruit is cotton candy grape. She has a budget of $20 to spend on a gallon of cider that costs $3.50 and the rest on cotton candy grapes. The cotton candy grapes cost $3.75 per pound.

We have to determine how many pounds of grapes Michaela can buy without spending more than $20.

To solve the problem, we will follow the steps given below:

Let's assume that Michaela spends $x on cotton candy grapes. Since she has $20 to spend,

she can spend $(20 - 3.5) = $16.5 on cotton candy grapes.

We can form an equation for the amount spent on grapes as:

3.75x ≤ 16.5

If we divide both sides of the inequality by 3.75, we will get:

x ≤ 16.5/3.75≈ 4.4

Therefore, the maximum number of pounds of cotton candy grapes Michaela can buy without spending more than $20 is 4 pounds.

Therefore, the options that solve the problem are 3, 4 and 5 (since she can't buy more than 4 pounds).

To know more about cotton candy grapes visit:

https://brainly.com/question/29191422

#SPJ11

To evaluate the line integral, we need to parametrize the given curve C and then substitute the parametric equations into the integrand. We can parameterize C using two line segments as follows:

For the first line segment from (0, 0) to (4, 0), we can let x = t and y = 0, where 0 ≤ t ≤ 4.

For the second line segment from (4, 0) to (5, 2), we can let x = 4 + t/√5 and y = 2t/√5, where 0 ≤ t ≤ √5.

Then the line integral becomes:

∫C xy dx +(x - y)dy = ∫0^4 t(0) dt + ∫0^√5 [(4 + t/√5)(2t/√5) dt + (4 + t/√5 - 2t/√5)(2/√5) dt]

Simplifying the integrand, we get:

∫C xy dx +(x - y)dy = ∫0^4 0 dt + ∫0^√5 [(8/5)t^2/5 + (8/5)t - (2/5)t^2/5 + (8/5)] dt

Evaluating the definite integral, we get:

∫C xy dx +(x - y)dy = [(8/25)t^5/5 + (4/5)t^2/2 + (8/5)t]0^√5 + [(2/25)t^5/5 + (4/5)t^2/2 + (8/5)t]0^√5

Simplifying, we get:

∫C xy dx +(x - y)dy = (16/5)(√5 - 1)

Therefore, the value of the line integral is (16/5)(√5 - 1).

To know more about line integral , refer here :

https://brainly.com/question/30763905#

#SPJ11

The time complexity of this algorithm is linear in the length of the formula.

The Stingy algorithm is a linear-time algorithm used to determine the satisfiability of Horn formulas. To implement the Stingy algorithm, we can use a directed graph with one node per variable to represent the implications. The graph is constructed by iterating over each clause in the formula and adding an edge from the negation of the first literal to the second literal of the clause. If a literal appears only in positive form, we can add a self-loop to its corresponding node.

Once the graph is constructed, we can perform a linear-time algorithm known as a depth-first search to determine the satisfiability of the Horn formula. Starting from any node in the graph, we mark it as visited and check its neighbors. If a neighbor has not been visited yet, we mark it as visited and continue the search recursively. If we encounter a node that has already been visited, we can stop the search and return that the formula is not satisfiable.

If we reach the end of the search without encountering a contradiction, we can return that the formula is satisfiable. The key advantage of this approach is that the time complexity is linear in the length of the formula (the number of occurrences of literals in it).

In summary, the Stingy algorithm for Horn formula satisfiability can be implemented using a directed graph with one node per variable and a depth-first search algorithm. The graph is constructed by adding an edge from the negation of the first literal to the second literal of each clause, and a self-loop to nodes that correspond to literals appearing only in positive form. The depth-first search algorithm is used to determine whether the formula is satisfiable or not, and the time complexity of this algorithm is linear in the length of the formula.

Learn more about complexity here

https://brainly.com/question/4667958

#SPJ11

We can obtain the binary expansion of a positive integer from its hexadecimal expansion by translating each hexadecimal digit into a block of four binary digits this is because each hexadecimal digit represents a group of four binary digits, so by converting each hexadecimal digit into its binary equivalent, we effectively "unpack" the binary digits that make up the integer.
We need to first understand what these terms mean to show that the binary expansion of a positive integer can be obtained from its hexadecimal expansion by translating each hexadecimal digit into a block of four binary digits.

Binary digits, also known as bits, are the building blocks of binary code, which is a digital code that uses only two digits (0 and 1) to represent information. On the other hand, hexadecimal digits are a base-16 numbering system that uses 16 digits (0-9 and A-F) to represent numbers.

Now, to translate a hexadecimal digit into a block of four binary digits, we simply need to convert each hexadecimal digit into its binary equivalent using a table like this:

| Hexadecimal | Binary |
|-------------|--------|
| 0           | 0000   |
| 1            | 0001    |
| 2           | 0010    |
| 3           | 0011     |
| 4           | 0100    |
| 5           | 0101     |
| 6           | 0110     |
| 7           | 0111       |
| 8           | 1000    |
| 9           | 1001     |
| A           | 1010     |
| B           | 1011      |
| C           | 1100     |
| D           | 1101      |
| E           | 1110       |
| F           | 1111         |

For example, let's say we have the hexadecimal number 2AF.

To translate this into its binary equivalent, we would simply convert each hexadecimal digit into its binary equivalent using the table above:

2 -> 0010
A -> 1010
F -> 1111

So the binary equivalent of 2AF is 001010111111.

In general, we can obtain the binary expansion of a positive integer from its hexadecimal expansion by translating each hexadecimal digit into a block of four binary digits using the table above. This is because each hexadecimal digit represents a group of four binary digits, so by converting each hexadecimal digit into its binary equivalent, we effectively "unpack" the binary digits that make up the integer.

Learn more about binary expansion : https://brainly.com/question/32291168

#SPJ11

a) The limit of the exponential term is also 0 hence, f'(0) = 0. b) All the derivatives of f(x) at x = 0 are zero. c) The Maclaurin series for f(x) is a constant term f(0), and it does not converge to f(x) for x ≠ 0.

a. To find f'(x), we need to differentiate f(x) with respect to x. For x ≠ 0, we have:

f'(x) = d/dx [tex]e^{-1/x^{2} }[/tex]

= (-2/[tex]x^{3}[/tex]) * [tex]e^{-1/x^{2} }[/tex]

Now, let's evaluate f'(0):

f'(0) = lim(x→0) [(-2/[tex]x^{3}[/tex]) * [tex]e^{-1/x^{2} }[/tex] ]

= lim(x→0) [-2/[tex]x^{3}[/tex]] * lim(x→0) [tex]e^{-1/x^{2} }[/tex]

Since the first limit is well-defined and equal to 0, we focus on the second limit:

lim(x→0)[tex]e^{-1/x^{2} }[/tex]

As x approaches 0, the term 1/[tex]x^{2}[/tex] approaches infinity. The exponential term [tex]e^{-1/x^{2} }[/tex]  tends to 0 as the exponent approaches negative infinity. Therefore, the limit of the exponential term is also 0.

Hence, f'(0) = 0.

b. Since f'(0) = 0 and we assume that [tex]f^{n}[/tex](0) = 0 for n = 1, 2, 3, and so on, we can conclude that all the derivatives of f(x) at x = 0 are zero.

c. The Maclaurin series for f(x) can be derived using the fact that all derivatives of f(x) at x = 0 are zero. The Maclaurin series is given by:

f(x) = f(0) + f'(0)x + (f''(0)/2!)[tex]x^{2}[/tex] + (f'''(0)/3!)[tex]x^{3}[/tex] + ...

Since f'(0) = 0 and all higher-order derivatives at x = 0 are also zero, we have:

f(x) = f(0)

Therefore, the Maclaurin series for f(x) is simply the constant term f(0). The series does not involve any powers of x or higher-order terms.

For x ≠ 0, the Maclaurin series does not converge to f(x) since it is just a constant value, f(0). The series fails to capture the behavior of f(x) away from x = 0, where f(x) is defined as [tex]e^{-1/x^{2} }[/tex] .

In summary, the Maclaurin series for f(x) is a constant term f(0), and it does not converge to f(x) for x ≠ 0 because it does not capture the exponential behavior of f(x) away from x = 0.

To learn more about exponential here:

https://brainly.com/question/28200739

#SPJ4

[tex]yp = Ae^x + Be^-x + Cx + D + Ex^2[/tex] is the assumed form of the particular solution for differential equation.

This is the assumed form of the particular solution for the differential equation [tex]y'' - y' = 7 + ex[/tex] using the method of undetermined coefficients. The coefficients A, B, C, D, and E are determined by substituting this form into the equation and solving for them.

A differential equation is a type of mathematical equation that explains how a function and its derivatives relate to one another. It is used to model a variety of physical events, including motion, growth, and decay, and it involves one or more derivatives of an unknown function. Differential equations can be categorised based on their order, which refers to the equation's highest order derivative. Depending on whether they incorporate one or more independent variables, they can also be categorised as ordinary or partial. Differential equations are a crucial component of the mathematical toolbox for modelling and analysing complicated systems and are utilised in many disciplines, including physics, engineering, economics, and biology.

Learn more about differential equation here:

https://brainly.com/question/31583235

#SPJ11

Answer: 2/5

Step-by-step explanation:

there's 5 parts and 2 of them are even therefore 2 out of 5 chances are them being even

Answer: 1/10

Step-by-step explanation:

The probability of spinning any one number on the spinner is 1/5, and the probability of flipping heads or tails on the coin is 1/2. To find the probability of spinning a number AND flipping heads, you would multiply the probabilities: (1/5) x (1/2)=1/10. So the probability of the compound even is 1/10.

Hope this helps

Answer:true

Step-by-step explanation:

The measure of the arc of the circular basin of the fountain that will be in the photograph is; 111°

Now, To answer this question, we need to understand the angle of intersecting secant theorem which state that;

If two lines intersect outside a circle, then the measure of the angle formed by the two lines is half of the positive difference of the measures of the intercepted arcs.

Thus;

θ = 1/2 (x₂ - x₁)

Where:

x₂ is large angle

x₁ is small angle

θ is measure of the Angle formed by the two lines

Now, we are given θ = 69°

Now the measure of the arc of the circular basin will be the smaller angle x₁.

However, the sum of the large and small angle is 360° and so large angle is 360 - x₁.

Thus;

69 = 1/2(360 - x - x)

2 × 69 = 360 - 2x

138 = 360 - 2x

360 - 138 = 2x

2x = 222

x = 222/2

x = 111°

Thus, The measure of the arc of the circular basin of the fountain that will be in the photograph is; 111°

Read more about angle of intersecting secant theorem at;

brainly.com/question/1626547

#SPJ1

The series is convergent, as shown by the ratio test.

To apply the ratio test, we evaluate the limit of the absolute value of the ratio of successive terms as n approaches infinity:

|[(n+1)(n+2)^6 / (2n+3)(2n+2)^6] * [n(2n+2)^6 / ((n+1)(2n+3)^6)]|

= |(n+1)(n+2)^6 / (2n+3)(2n+2)^6 * n(2n+2)^6 / (n+1)(2n+3)^6]|

= |(n+1)^2 / (2n+3)(2n+2)^2] * |(2n+2)^2 / (2n+3)^2|

= |(n+1)^2 / (2n+3)(2n+2)^2| * |1 / (1 + 2/n)^2|

As n approaches infinity, the first term goes to 1/4 and the second term goes to 1, so the limit of the absolute value of the ratio is 1/4, which is less than 1. Therefore, the series converges by the ratio test.

For more questions like Series click the link below:

https://brainly.com/question/28167344

#SPJ11

Answer:

1225

Step-by-step explanation

The sum of positive integers less than 50 can be found using the formula for the sum of an arithmetic sequence. An arithmetic sequence is a sequence of numbers in which each term is obtained by adding a fixed value (called the common difference) to the previous term.

In this case, the first term is 1, the common difference is 1, and we want to find the sum of the first 49 terms (since we are looking for the sum of positive integers less than 50).

The formula for the sum of an arithmetic sequence is:

S = n/2 * (a + l)

where S is the sum, n is the number of terms, a is the first term, and l is the last term.

We can find the last term by subtracting the common difference (1) from 50, since we want the last term to be less than 50. So:

l = 50 - 1 = 49

Using these values, we can plug into the formula:

S = 49/2 * (1 + 49)

= 24.5 * 50

= 1225

Therefore, the sum of positive integers less than 50 is 1+2+3+...+48+49 = 1225.

(a) To compute the eigenvalues and eigenvectors of A, we solve the characteristic equation:

det(A - λI) = 0

where I is the identity matrix and λ is the eigenvalue. Substituting the given matrix A and simplifying, we have:

|1-λ 1 4|

|2 3-λ 2|

|3 4 2-λ| = 0

Expanding along the first row, we get:

(1-λ)[(3-λ)(2-λ) - 4(4)] - (1)[(2)(2-λ) - 4(4)] + (4)[(2)(4) - (3)(3)] = 0

Simplifying and rearranging, we obtain:

λ^3 - 6λ^2 - 5λ + 60 = 0

We can factor this polynomial as (λ-5)(λ-4)(λ+3) = 0, so the eigenvalues of A are λ₁ = 5, λ₂ = 4, and λ₃ = -3.

To find the eigenvectors corresponding to each eigenvalue, we substitute back into the equation (A - λI)x = 0 and solve for x.

For λ₁ = 5, we have:

|1-5 1 4|   |-4 1 4|

|2 3-5 2| x =| 2-2|

|3 4 2-5|   | 3 4-3|

Reducing this to row echelon form, we get:

|1 0 -4/5|   | 4/5|

|0 1 -2/5| x =|-1/5|

|0 0 0   |   |  0 |

So the eigenvector corresponding to λ₁ is x₁ = (4/5, -1/5, 1).

Similarly, for λ₂ = 4, we have:

|-3 1 4|   | 1|

| 2 -1 2| x =|-1|

| 3 4 -2|   | 0|

Reducing to row echelon form, we get:

|1 0 -2|   |2/3|

|0 1 -2| x =|-1/3|

|0 0 0 |   |  0 |

So the eigenvector corresponding to λ₂ is x₂ = (2/3, 1/3, 1).

Finally, for λ₃ = -3, we have:

|4 1 4|   |-1|

|2 6 2| x =| 0|

|3 4 5|   |-1|

Reducing to row echelon form, we get:

|1 0 -2/5|   | 1/5|

|0 1 1/5 | x =|-1/5|

|0 0 0   |   |  0 |

So the eigenvector corresponding to λ₃ is x₃ = (2/5, -1/5, 1).

Next, we compute the eigenvalues and eigenvectors of I + A. Since I is the identity matrix, the characteristic equation is:

det(I + A - λI) = det(A + (I - I) - λI) = det(A + (1-λ)I) = 0

Substituting the given matrix A and simplifying, we have:

|2-λ 1 4|

|2 4-λ

#SPJ11

Aida bought 30 pounds of oranges.

Let the price of one pound of oranges be x dollars. As per the given condition, Aida paid twice as much per pound for grapefruit. Therefore, the price of one pound of grapefruit would be $2x.Total weight of the fruit bought by Aida is 50 pounds. Let the weight of oranges be y pounds. Therefore, the weight of grapefruit would be 50 - y pounds.Total amount spent by Aida on buying oranges would be $12. Therefore, we can write the equation:

x * y = 12  -------------- Equation (1)

Similarly, the total amount spent by Aida on buying grapefruit would be $16. Therefore, we can write the equation:

2x(50 - y) = 16 ----------- Equation (2)

Now, let's simplify equation (2)

2x(50 - y) = 16 => 100x - 2xy = 16 => 50x - xy = 8 => xy = 50x - 8

Let's substitute the value of xy from equation (1) into equation (2):

50x - 8 = 12 => 50x = 20 => x = 0.4

Therefore, the price of one pound of oranges is $0.4.

Substituting the value of x in equation (1), we get:y = 30

Therefore, Aida bought 30 pounds of oranges.

To know more about pounds visit:

https://brainly.com/question/29181271

#SPJ11

The volume of the given figure is 64 in³. Thus option 1. is the correct answer.

The figure given in the question is a cube, with one side equal to 4 in.

Note that all side of a cube are equal, therefore each side of the cube i.e. length, breadth and height are equal to 4 in.

∴The formula for calculating volume of cube is given by:

V = a³ ...........(i)

where,

V = Volume of cube, and

a = side of cube

Given that a = 4 in,

∴ V = (4 in)³

⇒ V = 64 in³

Thus, The volume of the given figure is 64 in³. Thus option 1. is the correct answer.

Read more about volume of cube on:

https://brainly.com/question/25248189

The volume of the cube is 64 in³.

Option A is the correct answer.

We have,

The given figure is a cube.

So we will use the volume of a cube.

Now,

The side of the cube is 4 in.

Now,

The volume of the cube.

= side³

Now,

Substitute side = 4 in

So,

The volume of the cube.

= side³

= 4³

= 64 in³

Thus,

The volume of the cube is 64 in³.

Learn more about cubes here:

https://brainly.com/question/11168779

#SPJ1

Answer:

We can use long division to divide (x3 − 5x2 − 16x + 20) by (x − 4) as follows:

x^2 + 3x - 4

_________________________

x - 4 | x^3 - 5x^2 - 16x + 20

- (x^3 - 4x^2)

________________

- x^2 - 16x

+ (x^2 - 4x)

________________

- 12x + 20

+ (-12x + 48)

________________

68

Therefore, (x3 − 5x2 − 16x + 20) ÷ (x − 4) = x^2 + 3x - 4 with a remainder of 68.

Polonium-210 is a radioactive element that decays exponentially. Its half-life is 140 days, which means that after 140 days, the amount of Polonium-210 will be reduced by half. The rate of decay is proportional to the amount at time t, which means that the more Polonium-210 there is, the faster it will decay.

Now, if we start with 200mg of Polonium-210, we can calculate how much will remain after 12 weeks. To do this, we need to convert 12 weeks into days, since the half-life of Polonium-210 is measured in days.
12 weeks is equal to 84 days (12 x 7 = 84), so we need to find out how many half-lives occur in this time period.
84 days divided by 140 days (the half-life of Polonium-210) gives us approximately 0.6 half-lives.
To calculate how much Polonium-210 remains after 0.6 half-lives, we can use the formula:
Amount remaining = initial amount x (1/2)^(number of half-lives)
Plugging in the values, we get:
Amount remaining = 200mg x (1/2)^(0.6)
Amount remaining = 111.3mg
Therefore, after 12 weeks, approximately 111.3mg of Polonium-210 will remain out of the initial 200mg.

Learn more about Polonium here

https://brainly.com/question/7191204

#SPJ11

(a) We have 7f(x) dx = (7-0) f(x) dx = 7 f(x) dx - 0 f(x) dx = (5/7)(7 f(x) dx) - (13/7)(0 f(x) dx) = (5/7)(5) - (13/7)(0) = 25/7.

(b) We have 0 f(x) dx = 0.

(c) We have 5 f(x) dx = (5-0) f(x) dx = 5 f(x) dx - 0 f(x) dx = (13/5)(5 f(x) dx) - (7/5)(0 f(x) dx) = (13/5)(13) - (7/5)(0) = 169/5.

(d) We have 5 3f(x) dx = 3(5 f(x) dx) = 3[(13/5)(5) - (7/5)(0)] = 39.

To know more about differentiation refer here:

https://brainly.com/question/24898810

#SPJ11

Answer:

Easy, speech frees sneeze

1. For Joshua's triangle; the distance of the green side of the triangle d₃ is 5.

2. For Murney's triangle, the perimeter of the triangle is 12.

3. For Grace, Abby and Chris's triangle, the perimeter of the triangle is 5 + √17 +  4√2.

4. For Chloe's triangle, the perimeter of the triangle is 11 + √65.

The distance of the triangles is calculated as follows;

For Joshua's triangle;

The length of d₁, d₂, and d₃ is calculated as follows;

d₁ = √ [(3 - 2)² + (2 - 0)²] = √5

d₂ = √ [(-1 - 3)² + (4 - 2)²] = 2√5

d₃ = √ [(-1 - 2)² + (4 - 0)²] = 5

The distance of the green side of the triangle d₃ = 5

For Murney's triangle, the perimeter of the triangle is calculated as;

BC = √ [(4 - 4)² + (6 - 2)²] = 4

AC = √ [(1 - 4)² + (2 - 2)²] = 3

AB = √ [(4 - 1)² + (6 - 2)²] = 5

Perimeter = 4 + 3 + 5 = 12

For Grace, Abby and Chris's triangle, the perimeter of the triangle is calculated as;

AC = √ [(-3 - 2)² + (2-2)²] = 5

BC = √ [(1 - 2)² + (2 + 2)²] = √17

AB = √ [(1 + 3)² + (2 + 2)²] = 4√2

Perimeter = 5 + √17 +  4√2

For Chloe's triangle, the perimeter of the triangle is calculated as;

AC =  √ [(-3 - 4)² + (2-2)²] = 7

BC =  √ [(4 - 4)² + (6-2)²] = 4

AB =  √ [(4 + 3)² + (6-2)²] = √65

Perimeter = 7 + 4 + √65 = 11 + √65

Learn more about perimeter of triangle here: https://brainly.com/question/24382052

#SPJ1

Answer: 15

Step-by-step explanation:

6^2 +x^2 = 10^2

x^2= 64

x=8

8^2 + y^2 = 17^2

64+y^2 = 289

y^2=225

y=15

A z-statistic is not used for a problem involving any sample size and an unknown population standard deviation so that the given statement is false.

A z-statistic is used when we are dealing with a large sample size (usually n ≥ 30) and the population standard deviation is known. In this scenario, the z-statistic is calculated using the sample mean, population mean, and population standard deviation. The z-statistic follows a standard normal distribution, which enables us to make inferences about the population based on the sample data.

On the other hand, when the population standard deviation is unknown, we use a t-statistic instead. The t-statistic is used for problems involving smaller sample sizes (usually n < 30) or when the population standard deviation is not known. In this case, the sample standard deviation is used as an estimate of the population standard deviation. The t-statistic follows a t-distribution, which is similar to the standard normal distribution but accounts for the uncertainty associated with estimating the population standard deviation from a sample.

In summary, the z-statistic is used for problems involving large sample sizes and a known population standard deviation, while the t-statistic is used for problems involving smaller sample sizes or an unknown population standard deviation.

To know more about z-statistic click here:

https://brainly.com/question/1298766

#SPJ11

The mean attention span for adults in a certain village is μ = 15 minutes with a standard deviation of σ = 6.4. We are interested in finding the mean of all possible samples of size n = 30, taken from that population.

According to the central limit theorem, the distribution of sample means will be approximately normal with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size. That is:

[tex]mean of sample means = population mean = μ = 15 minutes\\standard deviation of sample means = population standard deviation / sqrt(n) = σ / sqrt(30) ≈ 1.17 minutes[/tex]

Therefore, the mean of all possible samples of size 30, taken from the population with mean 15 minutes and standard deviation 6.4 minutes, is approximately equal to 15 minutes.

To know more about standard deviation refer here:

https://brainly.com/question/13498201

#SPJ11

a) The relation XRy is an equivalence relation.

b) The relation XRy is not an equivalence relation.

(a) Let's first check if the relation XRy is reflexive. For any integer x, we have x - x = 3(0), which means xRx. So the relation is reflexive.

Next, we check if it's symmetric. If x - y = 3m, then y - x = -3m, which is also of the form 3n (where n = -m). So the relation is symmetric.

Finally, we check if it's transitive. If x - y = 3m and y - z = 3n, then x - z = (x - y) + (y - z) = 3m + 3n = 3(m + n). So the relation is transitive.

(b) Again, let's check if XRy is reflexive. For any integer x, we have x + x = 3(2x/3), which means xRx. So the relation is reflexive.

Next, we check if it's symmetric. If x + y = 3m, then y + x = 3m, so the relation is symmetric.

Finally, we check if it's transitive. If x + y = 3m and y + z = 3n, then x + z = (x + y) + (y + z) - 2y = 3(m + n) - 2y. This expression is not necessarily of the form 3p for some integer p, so the relation is not transitive.

for such more question on equivalence

https://brainly.com/question/2328454

#SPJ11

(a) XRy if x - y = 3m for some integer m:

This relation is not an equivalence relation. To be an equivalence relation, it must satisfy the following three conditions: reflexivity, symmetry, and transitivity.

Reflexivity: For any integer x, x + x = 2x, which is a multiple of 3 when x is a multiple of 3. Therefore, xRx for all integers x.

Symmetry: If xRy, then x + y = 3m for some integer m. This implies that y + x = 3m, which is also a multiple of 3. Hence, yRx.

Transitivity: If xRy and yRz, then x + y = 3m and y + z = 3n for some integers m and n. Adding these two equations gives x + y + y + z = 3(m + n), which simplifies to x + z + 2y = 3(m + n). Since 2y is a multiple of 3, x + z must also be a multiple of 3. Therefore, xRz.

Since this relation satisfies all three properties of an equivalence relation, it is indeed an equivalence relation.

Learn more about numbers here : brainly.com/question/17429689

#SPJ11

The value of the house after 10 years will be approximately $265,134.1. The continuous rate of appreciation of a house can be calculated using the formula A = [tex]Pe^{(rt)[/tex].

The continuous rate of appreciation of a house can be calculated using the formula A = Pe^(rt), where A is the final value of the house, P is the initial value, e is the mathematical constant e ≈ 2.71828, r is the continuous rate, and t is the time in years. Therefore, if the initial value of the house is $215,000 and it appreciates continuously at a rate of 2.1%, the value of the house after 10 years can be calculated as follows:  A = [tex]Pe^{(rt)[/tex]
A = $215,000[tex]e^{(0.021 * 10)[/tex]
A = $215,000[tex]e^{(0.21)[/tex]
A = $215,000 × 1.23274
A = $265,134.1

Thus, the value of the house after 10 years will be approximately $265,134.1.

To know more about continuous rate of appreciation visit:

https://brainly.com/question/15508751

#SPJ11

The temperature (in degrees Fahrenheit) at the top of the mountain Everest, given that temperature will drop 1 degree for every 500 feet is -61 °F

First, we shall obtain the number of increment at every 500 feet. This is shown below:

Number of increment = Height of mountain / Height per drop

Number of increment = 29000 / 500

Number of increment =  58

Next, we shall obtain the temperature drop in the process. Details below:

Temperature drop = Temperature drop per increment × number of increment

Temperature drop = 1 × 58

Temperature drop = 58 °F

Finally, we shall obtain the temperature at the top of the mountain. Details below:

Temperature at top = Initial temperature - Temperature drop

Temperature at top = -3 - 58

Temperature at top = -61 °F

Learn more about temperature:

https://brainly.com/question/31866563

#SPJ1

Answer: x=-5.83..(repeated)