Compute the speed of sound in steel rails of a railroad track. The lb Ib fr ? a. weight density of steel is 49010, and the Young's modulus of steel is 29.0x10*9 in. Note: 29.0x10*15 in2 = 4176.0x10* lb 1.2 X100Ft b. 1.4x10" / 1.6x1097 d. 1.8x10 ft b ft c. 1 d*

Answers

Answer 1

The speed of sound in steel rails of a railroad track is approximately 2025 ft/s.

To compute the speed of sound in steel rails, we need to use the following formula: Speed of sound (v) = sqrt(E/ρ) Where E is Young's modulus of steel and ρ is the weight density of steel.

From the given information, we have E = 29.0 x 10^9 lb/in^2 (Young's modulus of steel) ρ = 49010 lb/ft^3 (weight density of steel).

First, we need to convert the units of Young's modulus to lb/ft^2: 1 ft = 12 in, so 1 ft^2 = 144 in^2 E = 29.0 x 10^9 lb/in^2 * (1 ft^2 / 144 in^2) = 29.0 x 10^9 / 144 lb/ft^2 = 2.0139 x 10^11 lb/ft^2.

Now, we can plug these values into the formula to compute the speed of sound in steel rails: v = sqrt(E/ρ) = sqrt(2.0139 x 10^11 lb/ft^2 / 49010 lb/ft^3) v ≈ sqrt(4.108 x 10^6 ft^2/ft^3) ≈ 2025 ft/s

For more such questions on the speed of sound:

https://brainly.com/question/15381147

#SPJ11

Answer 2

The speed of sound in steel rails of a railroad track is approximately 2025 ft/s.

To compute the speed of sound in steel rails, we need to use the following formula: Speed of sound (v) = sqrt(E/ρ) Where E is Young's modulus of steel and ρ is the weight density of steel.

From the given information, we have E = 29.0 x 10^9 lb/in^2 (Young's modulus of steel) ρ = 49010 lb/ft^3 (weight density of steel).

First, we need to convert the units of Young's modulus to lb/ft^2: 1 ft = 12 in, so 1 ft^2 = 144 in^2 E = 29.0 x 10^9 lb/in^2 * (1 ft^2 / 144 in^2) = 29.0 x 10^9 / 144 lb/ft^2 = 2.0139 x 10^11 lb/ft^2.

Now, we can plug these values into the formula to compute the speed of sound in steel rails: v = sqrt(E/ρ) = sqrt(2.0139 x 10^11 lb/ft^2 / 49010 lb/ft^3) v ≈ sqrt(4.108 x 10^6 ft^2/ft^3) ≈ 2025 ft/s

Visit to know more about Speed of sound:-

brainly.com/question/15381147

#SPJ11


Related Questions

An L-R-C series circuit has R = 60.0 Ω , L = 0.600 H , and C = 6.00×10−4 F . The ac source has voltage amplitude 80.0 V and angular frequency 120 rad/s .
A.)What is the maximum energy stored in the inductor?
B.)When the energy stored in the inductor is a maximum, how much energy is stored in the capacitor?
C.)What is the maximum energy stored in the capacitor?

Answers

When the energy stored in the inductor is at a maximum, the energy stored in the capacitor (Ecap) is zero.

To answer the given questions, let's calculate the maximum energy stored in the inductor, the energy stored in the capacitor when the inductor's energy is maximum, and the maximum energy stored in the capacitor.

Given:

R = 60.0 Ω

L = 0.600 H

C = 6.00×10^−4 F

V = 80.0 V

ω = 120 rad/s

A) Maximum energy stored in the inductor (Emax_L):

The formula for energy stored in an inductor is:

Emax_L = (1/2) * L * I^2,

where I is the peak current flowing through the inductor.

To find the peak current (I), we can calculate it using Ohm's law:

I = V / Z,

where Z is the impedance of the circuit.

In an L-R-C series circuit, the impedance Z is given by:

Z = √(R^2 + (ωL - 1/(ωC))^2).

Substituting the given values:

Z = √((60.0 Ω)^2 + (120 rad/s * 0.600 H - 1/(120 rad/s * 6.00×10^−4 F))^2),

Calculate Z to find the impedance.

Now substitute the value of Z in the equation for I.

Finally, substitute the value of I in the formula for Emax_L to find the maximum energy stored in the inductor.

B) When the energy stored in the inductor is at a maximum, the energy stored in the capacitor (Ecap) is zero. This occurs when the energy oscillates between the inductor and the capacitor, reaching maximum in one while being zero in the other.

C) Maximum energy stored in the capacitor (Emax_C):

Emax_C = (1/2) * C * V^2.

Substitute the given values of C and V in the formula to find the maximum energy stored in the capacitor.

Note: To provide specific calculations and results, please provide the values of R, L, C, V, and ω as decimal numbers.

To learn more about inductor, refer below:

https://brainly.com/question/15893850

#SPJ11

A technician places a double-slit assembly 1.45 m from a reflective screen. The slits are separated by 0.0582 mm.
(a)
Suppose the technician directs a beam of yellow light, with a wavelength of 590 nm, toward the slit assembly, and this makes an interference pattern on the screen. What distance (in cm) separates the zeroth-order and first-order bright fringes (a.k.a. maxima)?
cm

Answers

The distance separating the zeroth-order and first-order bright fringes is 0.79 cm.

How to calculate fringe separation?

The distance (in cm) separating the zeroth-order and first-order bright fringes can be calculated using the formula:

dsin(θ) = mλ

where d is the slit separation, θ is the angle between the line perpendicular to the screen and the line from the slits to the bright fringe, m is the order of the bright fringe, and λ is the wavelength of light.

To solve for the distance between the zeroth-order and first-order bright fringes:

Convert the slit separation from millimeters to meters: d = 0.0582 mm = 5.82e-5 mConvert the wavelength of yellow light from nanometers to meters: λ = 590 nm = 5.90e-7 mSolve for the angle θ for the first-order bright fringe (m = 1):

sin(θ) = (mλ) / d

= (15.90e-7 m) / (5.82e-5 m)

= 0.006019

θ = sin⁻¹(0.006019)

= 0.345°

The distance between the zeroth-order and first-order bright fringes can be calculated using trigonometry:

tan(θ) = opposite / adjacent

where the opposite side is the distance between the zeroth-order and first-order bright fringes, and the adjacent side is the distance from the slit assembly to the screen, which is given as 1.45 m.

Therefore, the distance between the zeroth-order and first-order bright fringes is:

opposite = tan(θ) * adjacent

= tan(0.345°) * 1.45 m

= 0.0079 m = 0.79 cm (to two significant figures)

Therefore, the distance (in cm) separating the zeroth-order and first-order bright fringes is 0.79 cm.

Learn more about distance

brainly.com/question/31713805

#SPJ11

a series rlc circuit consists of a 60 ω resistor, a 3.1 mh inductor, and a 510 nf capacitor. it is connected to an oscillator with a peak voltage of 5.5 v .
Part A
Determine the impedance at frequency 3000 Hz.
Part B
Determine the peak current at frequency 3000 Hz.
Part C
Determine phase angle at frequency 3000 Hz.

Answers

Part A: The impedance at frequency 3000 Hz is 63.12 Ω.

Part B: The peak current at frequency 3000 Hz is 0.087 A.

Part C: The phase angle at frequency 3000 Hz is -44.2°.

Part A: To find the impedance of the series RLC circuit at 3000 Hz, we use the formula:
Z = √(R^2 + (XL - XC)^2),
where R is the resistance,
XL is the inductive reactance, and
XC is the capacitive reactance.

Plugging in the values for the resistance, inductance, capacitance, and frequency, we get Z = √(60^2 + (2π(3000)(3.1x10^-3) - 1/(2π(3000)(510x10^-9)))^2) = 63.12 Ω.

Part B: To find the peak current of the circuit at 3000 Hz, we use the formula:
I = V/Z,
where V is the peak voltage and
Z is the impedance.

Plugging in the values for V and Z that we found in Part A, we get I = 5.5/63.12 = 0.087 A.

Part C: To find the phase angle of the circuit at 3000 Hz, we use the formula:
tanθ = (XL - XC)/R,
where XL and XC are the inductive and capacitive reactances,
R is the resistance.

Plugging in the values for XL, XC, and R, we get tanθ = (2π(3000)(3.1x10^-3) - 1/(2π(3000)(510x10^-9)))/60, which simplifies to tanθ = 0.896. Taking the arctangent of both sides gives θ = -44.2°.

To know more about "Peak current" refer here:

https://brainly.com/question/31857951#

#SPJ11

what is the correct html for making a drop-down list?

Answers

The correct HTML for creating a drop-down list is to use the `<select>` element along with the `<option>` elements. Here's an example:

[tex]```html < select > < option value="option1" > Option 1 < /option > < option value="option2" > Option 2 < /option > < option value="option3" > Option 3 < /option > < /select > ```[/tex]

In this example, the `<select>` element represents the drop-down list itself, and each `<option>` element represents an item within the list. The `value` attribute specifies the value associated with each option, while the content within the `<option>` tags represents the visible text for each item.

When a user interacts with the drop-down list, they can select one of the options. The selected option's value can then be retrieved using JavaScript or submitted as part of a form submission.

Learn more about HTML here:

https://brainly.com/question/17959015

#SPJ11

Speed A cart, weighing 24.5 N, is released from rest on a 1.00-m ramp, inclined at an angle of 30.0° as shown in Figure 16. The cart rolls down the incline and strikes a second cart weighing 36.8 N.
a. Define the two carts as the system. Calculate the speed of the first cart at the bottom of the incline.
b. If the two carts stick together, with what initial speed will they move along?​

Answers

(a) The speed of the first cart at the bottom of the incline is  4.43 m/s, and (b)the initial speed of the two carts as they move along after the collision is 2.08 m/s.

The conservation of energy principle is a fundamental law in physics that states that energy cannot be created or destroyed, only transferred or transformed from one form to another. It is a powerful tool for predicting the behavior of physical systems and plays a critical role in many areas of science and engineering.

a. To calculate the speed of the first cart at the bottom of the incline, we can use the conservation of energy principle. At the top of the incline, the cart has only potential energy due to its position above the ground. At the bottom of the incline, all of this potential energy has been converted into kinetic energy, so we can equate the two:

mgh = (1/2)mv^2

where m is the mass of the cart, g is the acceleration due to gravity, h is the height of the incline, and v is the velocity of the cart at the bottom.

Plugging in the values given, we get:

(24.5 N)(9.81 m/s^2)(1.00 m) = (1/2)(24.5 N)v^2

Solving for v, we get:

v = √(2gh) = √(2(9.81 m/s^2)(1.00 m)) ≈ 4.43 m/s

Therefore, the speed of the first cart at the bottom of the incline is approximately 4.43 m/s.

b. If the two carts stick together, we can use conservation of momentum to determine their initial speed. Since the two carts stick together, they form a single system with a total mass of:

m_total = m1 + m2 = 24.5 N + 36.8 N = 61.3 N

Let v_i be the initial velocity of the system before the collision, and v_f be the final velocity of the system after the collision. By conservation of momentum:

m_total v_i = (m1 + m2) v_f

Plugging in the values given, we get:

(61.3 N) v_i = (24.5 N + 36.8 N) v_f

Solving for v_i, we get:

v_i = (24.5 N + 36.8 N) v_f / (61.3 N)

We need to determine the final velocity of the system after the collision. Since the carts stick together, their combined kinetic energy will be:

K = (1/2) m_total v_f^2

This kinetic energy must come from the potential energy of the first cart before the collision, so we can write:

m1gh = (1/2) m_total v_f^2

Plugging in the values given, we get:

(24.5 N)(9.81 m/s^2)(1.00 m) = (1/2)(61.3 N) v_f^2

Solving for v_f, we get:

v_f = √(2m1gh / m_total) = √(2(24.5 N)(9.81 m/s^2)(1.00 m) / (24.5 N + 36.8 N)) ≈ 3.27 m/s

Plugging this into the equation for v_i, we get:

v_i = (24.5 N + 36.8 N)(3.27 m/s) / (61.3 N) ≈ 2.08 m/s

So, the initial speed of the two carts as they move along after the collision is approximately 2.08 m/s.

Hence, The initial speed of the two carts as they go forward following the collision is 2.08 m/s, and the speed of the first cart is 4.43 m/s at the bottom of the hill.

To learn more about Kinetic Energy click:

brainly.com/question/26472013

#SPJ1

Two men push horizontally on a heavy sofa with a combined force of 150 N and the sofa does not move. How much is the frictional force between the carpet and the sofa? The men push with a combined force of 200 N and the sofa just begins to move What is the maximum frictional force between the carpet and the sofa? Once the sofa begins to slide along the carpet, the men realize that they need to push with a force of 185 N to keep the sofa moving at a constant speed. What is the kinetic frictional force between the carpet and the sofa?

Answers

The frictional force between the carpet and the sofa can be found using the formula F_friction = F_applied - F_normal, where F_applied is the applied force, F_normal is the normal force (equal to the weight of the sofa), and F_friction is the frictional force.

1. When the two men push horizontally on the heavy sofa with a combined force of 150 N and the sofa does not move, it means that the frictional force is equal to the applied force, which is 150 N.

2. When the men push with a combined force of 200 N and the sofa just begins to move, it means that the frictional force is equal to the maximum static frictional force, which is also 200 N.

3. Once the sofa begins to slide along the carpet, the men need to push with a force of 185 N to keep the sofa moving at a constant speed. This means that the frictional force is equal to the kinetic frictional force, which is also 185 N.

In the first scenario, the two men push horizontally on the heavy sofa with a combined force of 150 N and the sofa does not move. Since the sofa is not moving, the frictional force between the carpet and the sofa is equal to the applied force, which is 150 N.

In the second scenario, the men push with a combined force of 200 N and the sofa just begins to move. At this point, the maximum frictional force between the carpet and the sofa, also known as the static friction, is equal to the applied force, which is 200 N.

Finally, when the sofa begins to slide along the carpet and the men need to push with a force of 185 N to maintain a constant speed, this force is equal to the kinetic frictional force between the carpet and the sofa. Therefore, the kinetic frictional force is 185 N.

To know about Force visit:

https://brainly.com/question/13191643

#SPJ11

consider a transfer function , where =a320 rad/sec. calculate the frequency in hertz at which the phase of the transfer function is -45 degrees.

Answers

Therefore, the frequency in Hertz at which the phase of the transfer function is -45 degrees is 50.92 Hz.

To help you with your question, let's consider a transfer function with an angular frequency (ω) of 320 rad/sec.

We need to find the frequency in hertz (Hz) at which the phase of the transfer function is -45 degrees.

First, it's essential to understand the relationship between angular frequency (ω) and frequency (f).

They are related by the equation:

ω = 2πf

Now, we are given ω = 320 rad/sec.

To find the frequency (f) in hertz, we can rearrange the equation:

f = ω / (2π)

Substitute the given value of ω:

f = 320 rad/sec / (2π)

f ≈ 50.92 Hz

So, the frequency at which the phase of the transfer function is -45 degrees is approximately 50.92 Hz. The phase of a transfer function indicates the amount of phase shift or delay introduced by the system. In this case, the phase shift of -45 degrees means that the output signal lags behind the input signal by 45 degrees at a frequency of 50.92 Hz.

know more about angular frequency here:

https://brainly.com/question/14244057

#SPJ11

A speaker is placed near a narrow tube of length L = 0.30 m, open at both ends, as shown above. The speakeremits a sound of known frequency, which can be varied. A student slowly increases the frequency of the emittedsound waves, without changing the amplitude, until the fundamental frequency f0 inside the tube is reached and

Answers

When the speaker is placed near a narrow tube that is open at both ends, it creates a resonant cavity inside the tube. This cavity can amplify certain frequencies of sound waves and produce a standing wave pattern inside the tube.

As the student slowly increases the frequency of the emitted sound waves, without changing the amplitude, the standing wave pattern inside the tube changes. This change in the standing wave pattern is due to the resonance of the sound waves with the natural frequency of the tube.

The fundamental frequency f0 inside the tube is the lowest frequency at which a standing wave pattern is formed inside the tube. This frequency is directly related to the length of the tube and the speed of sound in air. The fundamental frequency f0 can be calculated using the formula:

f0 = v/2L

Where v is the speed of sound in air and L is the length of the tube.

In this case, the length of the tube is given as L = 0.30 m. By slowly increasing the frequency of the emitted sound waves, the student will eventually reach the fundamental frequency f0 inside the tube. Once this frequency is reached, the standing wave pattern inside the tube will be at its strongest and most stable.

It is important to note that the resonance of sound waves inside a tube depends on several factors, including the diameter of the tube, the temperature and humidity of the air, and the presence of any obstructions or bends in the tube.

Therefore, the resonance frequency of a tube may not always be exactly equal to its fundamental frequency. However, in this case, assuming that the tube is a simple straight tube with no obstructions or bends, the fundamental frequency f0 can be calculated using the formula above.

A speaker is placed near a narrow tube of length L = 0.30 m, open at both ends, as shown above. The speaker emits a sound of known frequency, which can be varied. A student slowly increases the frequency of the emitted sound waves, without changing the amplitude, until the fundamental frequency f0 inside the tube is reached. At this frequency, the tube resonates with a standing wave pattern, where the antinodes of the sound wave occur at the open ends of the tube and the nodes occur at the center of the tube.

a) What is the fundamental frequency f0 of the sound wave inside the tube?

b) If the speed of sound in air is 343 m/s, what is the wavelength of the sound wave inside the tube at the fundamental frequency?

c) What is the next frequency that will produce a standing wave pattern in the tube? Will this be the second harmonic or a higher harmonic?

For more such questions on frequencies

https://brainly.com/question/254161

#SPJ11

When the speaker is placed near a narrow tube of length L = 0.30 m, open at both ends, and emits a sound of known frequency.

The sound waves travel through the tube and reflect back and forth between the two open ends, creating standing waves. The frequency at which the standing waves have the longest wavelength and the lowest frequency is called the fundamental frequency, denoted by f0.
The length of the tube, L, determines the wavelengths of the standing waves that can be supported inside the tube. Specifically, the wavelengths that fit into the tube must be equal to twice the length of the tube or an integer multiple of that value. This is known as the resonance condition.
The frequency of the sound wave emitted by the speaker determines the wavelength of the sound wave. When the frequency is increased, the wavelength decreases, and the standing wave pattern inside the tube changes accordingly. When the frequency reaches the fundamental frequency, the standing wave pattern inside the tube reaches its lowest possible frequency and the maximum amplitude, as long as the amplitude of the sound wave emitted by the speaker is kept constant.
In summary, the narrow tube of length L determines the wavelengths of the standing waves that can be supported inside the tube, the frequency of the emitted sound wave determines the wavelength of the sound wave, and the amplitude of the sound wave affects the maximum amplitude of the standing wave pattern inside the tube at the fundamental frequency.


A speaker placed near a narrow tube of length L = 0.30 m, open at both ends, and you'd like to know about the fundamental frequency f0 inside the tube when the emitted sound waves match it.
When a speaker emits sound waves of a known frequency into a narrow tube of length L = 0.30 m, open at both ends, the tube can create standing waves if the emitted frequency matches one of the tube's resonant frequencies. The fundamental frequency, f0, is the lowest resonant frequency in the tube.
To find the fundamental frequency f0, we can use the formula for the fundamental frequency of a tube open at both ends:
f0 = v / (2 * L)
where f0 is the fundamental frequency, v is the speed of sound in the medium (usually air), and L is the length of the tube.
Assuming the speed of sound in air is approximately 343 m/s, you can calculate the fundamental frequency f0:
f0 = 343 m/s / (2 * 0.30 m) = 343 m/s / 0.6 m = 571.67 Hz
So, when the speaker emits a sound of frequency 571.67 Hz without changing the amplitude, the fundamental frequency f0 inside the narrow tube of length L = 0.30 m open at both ends is reached.

Visit here to learn more frequency:

brainly.com/question/5102661

#SPJ11

Carbon dioxide concentrations are often used as proxy for temperature. What does this mean? Atmospheric CO2 concentrations and global temperature are indirectly related, so when CO2 rises, temperature drops Atmospheric CO2 concentrations and global temperature are directly related, so when CO2 rises, so does temperature Atmospheric CO2 concentrations and global temperature fluctuate independently

Answers

Atmospheric CO2 concentrations and global carbon  temperature are directly related, so when CO2 rises, so does temperature.


On the other hand, when CO2 concentrations decrease, this leads to a decrease in the greenhouse effect and less heat being trapped, causing temperatures to drop.

So, to answer your question, atmospheric CO2 concentrations and global temperature are indirectly related, meaning that when CO2 rises, temperature also rises.

To know more about carbon visit :-

https://brainly.com/question/3049557

#SPJ11

The density of states functions in quantum mechanical distributions give
a. the energy at which the density of particles occupying that state is the greatest.
b. the number of particles at a given energy level.
c. the statistical factors for the Maxwell-Boltzmann, Fermi-Dirac, and Bose-Einstein distributions.
d. the number of energy states available per unit of energy range.

Answers

The Answer is d. The number of energy states available per unit of energy range.

the density of states functions in quantum mechanical distributions give the number of energy states available per unit of energy range.

These functions provide a measure of the density of energy states available to the particles in a quantum mechanical system.

The density of states is used to calculate the number of particles at a given energy level, but it does not directly give the number of particles at that level.

The statistical factors for the Maxwell-Boltzmann, Fermi-Dirac, and Bose-Einstein distributions are related to the density of states but are not the same thing.

To know more about states functions refer here

https://brainly.com/question/15563372#

#SPJ11

Light passes from a medium of index of refraction na into a second medium of index of refraction nb-The angles of incidence and refraction are and G, respectively. Ifna 6h and the light speeds up as it enters the second medium B) ?.< ?>, and the light slows down as itanters the second medium C) ?.< ?b and the light speeds up as it enters the second medium D) ?.> ?b and the light slows down as it enters the second medium 5 E) None of the above are true

Answers

The option C) ?.< ?b and the light speeds up as it enters the second medium is the right response.

When light passes from a medium of higher refractive index (na) to a medium of lower refractive index (nb), it bends away from the normal and speeds up.

The angle of incidence (i) is larger than the angle of refraction (r), and the angle of refraction is measured with respect to the normal.

The relationship between the angles and refractive indices is given by Snell's law: na sin(i) = nb sin(r).

Since the light speeds up in the second medium, its velocity and wavelength increase, while its frequency remains constant.

Thus, the correct option is C) ?.< ?b and the light speeds up as it enters the second medium.

Learn more about "light": https://brainly.com/question/10728818

#SPJ11

Coherent light with wavelength 450 mn falls on a pair of slits. On a screen 1.90 in away, the distance between dark fringes is 3.98 mm. What is the slit separation? Express your answer to three significant figures and include the appropriate units.

Answers

The slit separation is 0.0299 mm.

Using the equation for the distance between adjacent bright fringes, d*sinθ = mλ, where d is the slit separation, θ is the angle between the line connecting the slit and the bright fringe and the line perpendicular to the screen, m is the order of the fringe, and λ is the wavelength of light. For dark fringes, the path difference between the waves from the two slits is λ/2. The distance between adjacent dark fringes can be found using the equation D = λL/d, where D is the distance between adjacent dark fringes on the screen, L is the distance between the slits and the screen, and λ and d are as previously defined. Solving for d gives a value of 0.0299 mm, which is the required answer.

Learn more about required here :

https://brainly.com/question/29657983

#SPJ11

a shaft has a nominai diameter of25 mm. the shaft diameter ls specified with a tolerance 「ange of24.944 mm to 25.o40 mm. what is most neariy the tolera=ce ofthe shaft:

Answers

The tolerance of the shaft is determined by the difference between the upper and lower limits of the specified diameter range. Among the given options, the tolerance of the shaft that is most nearly equal to 0.096 mm is: d. 0.073 mm

In this case, the tolerance is calculated as 25.040 mm - 24.944 mm, resulting in a value of 0.096 mm. Among the given options, the tolerance that is closest to 0.096 mm is 0.073 mm.

A tolerance of 0.073 mm means that the actual diameter of the shaft can vary by ±0.073 mm from the nominal diameter of 25 mm. This tolerance range allows for slight variations in the manufacturing process while still ensuring that the shaft falls within acceptable specifications.

To know more about the tolerance refer here :

https://brainly.com/question/31741745#

#SPJ11

Complete question :

A shaft has a nominal diameter of 25 mm. The shaft diameter is specified with a tolerance range of 24.944 mm to 25.040 mm. What is most nearly the tolerance of the shaft:

a. 0.016mm

b. 0.023mm

c. 0.050mm

d. 0.073mm

A turntable rotates with a constant 2.25 rad/s^2 angular acceleration. After 4.50 s it has rotated through an angle of 30.0 rad. What was the angular velocity of the wheel at the beginning of the 4.50-s interval?

Answers

The angular velocity of the turntable at the beginning of the 4.50 s interval was 0.00 rad/s.

We can use the following kinematic equation to relate the angular displacement, initial angular velocity, angular acceleration, and time:

θ = ω_i * t + (1/2) * α * t²

where θ is the angular displacement, ω_i is the initial angular velocity, α is the angular acceleration, and t is the time interval.

In this problem, we know that the angular acceleration is constant and equal to 2.25 rad/s², the time interval is 4.50 s, and the angular displacement is 30.0 rad. We can rearrange the kinematic equation to solve for the initial angular velocity:

ω_i = (θ - (1/2) * α * t²) / t

Substituting the given values, we have:

ω_i = (30.0 rad - (1/2) * 2.25 rad/s² * (4.50 s)²) / 4.50 s

ω_i = 0.00 rad/s

Therefore, the angular velocity of the turntable at the beginning of the 4.50 s interval was 0.00 rad/s. This makes sense since the turntable starts from rest and has a constant angular acceleration throughout the 4.50 s interval.

learn more about angular displacement here:

https://brainly.com/question/26483834

#SPJ11

Let x (t) = cos(757t). If we sample x (t) at the Nyquist rate, what is the resulting discrete frequency for this sinusoid in radians/sample? a. 757/2 b. TT c. none of the above d. TT 5

Answers

The resulting discrete frequency for this sinusoid in radians/sample when sampled at the Nyquist rate is TT/2.

The Nyquist rate states that in order to accurately represent a signal without distortion, the sampling rate must be at least twice the highest frequency component of the signal. In this case, the highest frequency component of the signal is 757 radians per second (not per sample).

To convert this frequency to radians per sample, we need to divide by the sampling rate. Since we are sampling at the Nyquist rate, the sampling rate is equal to twice the highest frequency component of the signal, which is 2*757 = 1514 radians per second.

To know more about frequency visit:

https://brainly.com/question/4671819

#SPJ11

An object has a moment of inertia of 150 kg-m2. A torque of 72 N-m is applied to the object. What is the angular acceleration? A. 2.08 rad/s2 B. 10800 rad/s C. 0.48 rad/s2 D. 983 rad/s2

Answers

The angular acceleration is calculated using the formula: angular acceleration = torque/moment of inertia. Therefore, angular acceleration = 72 N-m / 150 kg-m2 = 0.48 rad/s2 (Option C).

The angular acceleration of an object is the rate at which its angular velocity changes over time due to an applied torque.

In this case, the object has a moment of inertia of 150 kg-m2, and a torque of 72 N-m is applied.

To find the angular acceleration, we can use the formula: angular acceleration = torque/moment of inertia.

By plugging in the given values, we get: angular acceleration = 72 N-m / 150 kg-m2 = 0.48 rad/s2.

Thus, the correct option is C, as the angular acceleration of the object is 0.48 rad/s2 when the torque is applied.

For more such questions on acceleration, click on:

https://brainly.com/question/460763

#SPJ11

what are the top 10 questions to ask an interviewer

Answers

When preparing for an interview, it's important to have thoughtful questions to ask the interviewer. Here are ten questions that can help you gain valuable information about the company, role, and work environment:

1. Can you tell me more about the day-to-day responsibilities and challenges of this role?

2. What are the key qualities or skills that you're looking for in an ideal candidate for this position?

3. How would you describe the company culture and work environment?

4. Can you share any long-term goals or upcoming projects that the team or company is working on?

5. How do you support professional development and growth within the company?

6. What is the typical career progression for someone in this role?

7. How does the company foster collaboration and teamwork among employees?

8. Can you provide more insight into the team dynamics and the people I would be working with?

9. How does the company embrace innovation and adapt to industry changes?

10. What are the next steps in the interview process, and when can I expect to hear back from you?

Remember, these questions are just a starting point, and it's important to tailor them to the specific company and role you are interviewing for. Asking thoughtful questions not only shows your interest but also allows you to gather information to make an informed decision about the job opportunity.

Learn more about preparing for job interviews here:

https://brainly.com/question/28784869?referrer=searchResults

#SPJ11

F the same experiment is carried out on Earth, air resistance affects both objects. The feather reaches the ground after the hammer, even though the force of air resistanceis smaller on the feather than on the hammer. Explain why the feather reaches the ground after the hammer

Answers

The feather reaches the ground after the hammer due to its larger surface area, which causes greater air resistance. The feather experiences more drag, slowing down its descent, while the hammer, with a smaller surface area, encounters less air resistance and falls faster.

Air resistance is a force that opposes the motion of an object through the air. The magnitude of air resistance depends on the surface area of the object. In this case, the feather has a larger surface area compared to the hammer. When both objects are dropped, the feather experiences more drag due to the increased contact with air molecules. This drag force slows down the feather's descent, causing it to take longer to reach the ground. On the other hand, the hammer encounters less air resistance due to its smaller surface area, allowing it to fall faster and reach the ground before the feather.

learn more about feather here:

https://brainly.com/question/12153536

#SPJ11

1. If you are using a meter stick to measure how far a ball rolls before stopping, how would you find the uncertainty in distance? Explain why this is a valid method to find the uncertainty in this case. 2. If you are using a motion encoder receiver to find the velocity of a cart, how would you find the uncertainty in velocity? Explain why this is a valid method to find the uncertainty in this case. 3. If you are using a motion detector to find the acceleration of a ball, how would you find the uncertainty in acceleration? Explain why this is a valid method to find the uncertainty in this case

Answers

To find the uncertainty in distance measured with a meter stick, you would consider the smallest increment marked on the meter stick.

The uncertainty would be half of this smallest increment, since it represents the range within which the actual position of the ball could lie. This is a valid method because it accounts for the inherent limitations of the measuring instrument and provides an estimate of the potential error in the measurement. To find the uncertainty in velocity measured with a motion encoder receiver, you would consider the precision of the receiver itself. The uncertainty would depend on the resolution of the encoder, which represents the smallest change in position it can detect. Dividing this resolution by the time interval used to calculate velocity gives the uncertainty in velocity. This method is valid because it takes into account the limitations of the measurement device, providing an estimate of the potential error in the velocity measurement. To find the uncertainty in acceleration measured with a motion detector, you would consider the precision and sensitivity of the detector. The uncertainty can be determined by the smallest detectable change in velocity over the time interval used to calculate acceleration. This method is valid because it considers the accuracy and limitations of the motion detector, providing an estimate of the potential error in the acceleration measurement.

learn more about distance here:

https://brainly.com/question/13034462

#SPJ11

Choose a favorite brand that does not currently use nostalgia in their marketing. How could they incorporate this technique into their product strategy and advertising?

Answers

Favorite Brand: Tesla  can incorporate nostalgia into their marketing by highlighting the iconic designs of classic cars, emphasizing the brand's commitment to innovation while paying homage to automotive history.

Tesla, a brand known for its futuristic and innovative approach to electric vehicles, could incorporate nostalgia into their marketing strategy in a few ways. They could introduce a limited edition model inspired by classic cars, featuring design elements reminiscent of iconic vehicles from the past. This would create a sense of nostalgia for car enthusiasts who appreciate the aesthetics of older models while still offering the cutting-edge technology and sustainability of Tesla's electric vehicles.

In their advertising, Tesla could leverage nostalgia by showcasing the evolution of transportation and how their cars are revolutionizing the industry. They could highlight historical milestones in automotive history and demonstrate how Tesla is building upon that legacy with their state-of-the-art vehicles. By combining nostalgia with their futuristic brand image, Tesla could create a compelling narrative that appeals to both traditional car enthusiasts and those seeking innovative transportation solutions.

learn more about marketing here:

https://brainly.com/question/31110396

#SPJ11

A wave pulse is transmitted down a Slinky, but the Slinky itself does not change position. Does a transfer of energy take place in this process?
a. No, there is no transfer of energy because the Slinky does not move.
b. No, there is no transfer of energy because the pulse is not capable of transferring its energy.
c. Yes, the mechanical energy put into the pulse wends its way quickly along the Slinky.
d. Yes, but the mechanical energy is transformed into thermal energy.

Answers

The answer is c. Yes, the mechanical energy put into the pulse wends its way quickly along the Slinky.

When a wave pulse is transmitted down a Slinky, the coils of the Slinky vibrate back and forth but do not actually move along the length of the Slinky. However, this does not mean that no energy is transferred. The wave pulse contains mechanical energy that is passed along the Slinky from one coil to the next. As the pulse moves along the Slinky, the energy is transferred from one coil to the next, causing each coil to vibrate and pass the energy along to the next coil. This transfer of energy occurs quickly along the Slinky, allowing the pulse to travel from one end of the Slinky to the other.



- When a wave pulse is transmitted down a Slinky, the coils of the Slinky vibrate back and forth but do not actually move along the length of the Slinky.
- This does not mean that no energy is transferred.
- The wave pulse contains mechanical energy that is passed along the Slinky from one coil to the next.
- As the pulse moves along the Slinky, the energy is transferred from one coil to the next, causing each coil to vibrate and pass the energy along to the next coil.
- This transfer of energy occurs quickly along the Slinky, allowing the pulse to travel from one end of the Slinky to the other.
- Therefore, a transfer of energy does take place in this process.

Although the Slinky itself does not change position when a wave pulse is transmitted down it, a transfer of energy does take place as the mechanical energy in the pulse is passed along from one coil to the next.

To know more about mechanical energy visit:

brainly.com/question/29509191

#SPJ11

the ""flapping"" of a flag in the wind is best explained using (a) archimedes’ (b) bernoulli’s principle (c) newton’s prin

Answers

The flapping of a flag in the wind is best explained by Newton's principle of motion, specifically his laws of inertia and acceleration.

When wind blows over a flag, it applies a force to the flag in the direction of the wind. According to Newton's first law of motion, an object at rest will remain at rest or an object in motion will continue moving in a straight line at a constant speed unless acted upon by an external force. In this case, the flag, which is initially at rest, is acted upon by the force of the wind, causing it to move.As the wind continues to blow, it creates fluctuations in the force acting on the flag. These fluctuations cause the flag to move back and forth in a repeating motion, resulting in the flapping of the flag.Newton's second law of motion explains that the acceleration of an object is directly proportional to the force acting on it and inversely proportional to its mass. Therefore, a lighter flag will experience a greater acceleration and move more quickly in response to the force of the wind.

For such more questions on flapping

https://brainly.com/question/24267617

#SPJ11

A 24-V battery is connected in series with a resistor and an inductor, with R = 2.0 ? and L = 4.4 H, respectively.(a) Find the energy stored in the inductor when the current reaches its maximum value. J(b) Find the energy stored in the inductor one time constant after the switch is closed. J

Answers

The energy stored in the inductor one time constant after the switch is closed is 79.2 J.  the energy stored in the inductor when the current reaches its maximum value is 316.8 J.


where E is the energy stored in joules, L is the inductance in henries, and I is the current in amperes.
(a) When the current reaches its maximum value, the energy stored in the inductor can be calculated as follows:
The maximum current can be found using Ohm's Law, which states that V = IR, where V is the voltage, I is the current, and R is the resistance. In this case, V = 24 V, R = 2.0 ?, so I = V/R = 12 A.
Using this value of current and the inductance of the inductor, we can calculate the energy stored in the inductor as:
E = (1/2) * L * I^2
E = (1/2) * 4.4 H * (12 A)^2
E = 316.8 J


(b) One time constant after the switch is closed, the current in the circuit can be found using the formula:
I = I0 * e^(-t/tau)
where I0 is the initial current, t is the time since the switch was closed, and tau is the time constant, which is given by tau = L/R.
In this case, the time constant can be calculated as:
tau = L/R = 4.4 H / 2.0 ?
tau = 2.2 s
One time constant after the switch is closed, t = 2.2 s, and the current can be found as:
I = I0 * e^(-t/tau)
I = 12 A * e^(-2.2 s / 2.2 s)
I = 6 A
Using this value of current and the inductance of the inductor, we can calculate the energy stored in the inductor as:
E = (1/2) * L * I^2
E = (1/2) * 4.4 H * (6 A)^2
E = 79.2 J

To know more about inductor visit:-

https://brainly.com/question/15893850

#SPJ11


A student sets an object attached to a spring into oscillatory motion and uses a position sensor to record the displacement of the object from equilibrium as a function of time. A portion of the recorded data is shown in the figure above.
The speed of the object at time t=0.65 s is most nearly equal to which of the following?

Answers

The speed of the object at t=0.65 s is most nearly equal to 0.9 cm/s.

Based on the given graph, we can see that the displacement of the object from equilibrium is maximum at t=0.65 s. This means that the object has just passed through its equilibrium position and is moving with maximum speed.
To determine the speed of the object at this time, we need to look at the slope of the displacement vs. time graph at t=0.65 s. The slope at this point is steep and positive, indicating that the object is moving rapidly in the positive direction.

Therefore, the speed of the object at t=0.65 s is most nearly equal to the maximum speed achieved during the oscillatory motion, which corresponds to the amplitude of the motion. From the graph, we can estimate the amplitude to be approximately 0.9 cm.

So, the speed of the object at t=0.65 s is most nearly equal to 0.9 cm/s.


Here is a step-by-step process to find the speed using the given terms:
1. Analyze the displacement vs time graph provided in the figure.
2. Find the equation that best fits the graph, which should be a sinusoidal function (since it's oscillatory motion) in the form: displacement = A * sin(ω * t + φ), where A is the amplitude, ω is the angular frequency, and φ is the phase shift.
3. Differentiate the displacement equation with respect to time (t) to obtain the velocity equation: velocity = A * ω * cos(ω * t + φ).
4. Substitute the given time, t=0.65s, into the velocity equation.
5. Calculate the speed at t=0.65s by taking the absolute value of the velocity obtained in step 4.

Once you follow these steps using the actual data from the figure, you will find the speed of the object at t=0.65s most nearly equal to one of the given options.


Learn more about oscillatory motion

https://brainly.com/question/14792928

#SPJ11

A 0. 5 kg water pistol is filled with water, which is included in the mass. It fires a squirt of 0. 001 kg of water at 5 m/s. How fast does the water pistol recoil?​

Answers

A 0. 5 kg water pistol is filled with water, which is included in the mass. It fires a squirt of 0. 001 kg of water at 5 m/s. The water pistol recoils with a speed of 0.01 m/s in the opposite direction to the expelled water.

To determine the recoil speed of the water pistol, we can apply the principle of conservation of momentum. According to this principle, the total momentum before an event is equal to the total momentum after the event, provided no external forces are acting on the system.

In this case, the water pistol and the water it expels form a closed system. Initially, both the water pistol and the water are at rest, so the total momentum before firing is zero. After firing, the water pistol recoils in the opposite direction, and the expelled water moves forward.

Let's denote the recoil speed of the water pistol as v_pistol and the velocity of the expelled water as v_water. The momentum of an object is calculated by multiplying its mass by its velocity.

Before firing:

Total momentum = 0

After firing:

Momentum of water pistol = (mass of water pistol) * (recoil speed) = (0.5 kg) * (v_pistol)

Momentum of expelled water = (mass of water) * (velocity of water) = (0.001 kg) * (5 m/s)

According to the conservation of momentum, the total momentum before firing must be equal to the total momentum after firing:

0 = (0.5 kg) * (v_pistol) + (0.001 kg) * (5 m/s)

Simplifying the equation:

0.001 kg * 5 m/s = 0.5 kg * v_pistol

0.005 kg⋅m/s = 0.5 kg * v_pistol

Dividing both sides by 0.5 kg:

0.01 m/s = v_pistol

Therefore, the water pistol recoils with a speed of 0.01 m/s in the opposite direction to the expelled water.

Learn more about principle of conservation of momentum here:

https://brainly.com/question/29044668

#SPJ11

PLEASE HELP ME WITH THIS ONE QUESTION


You have 1 kg of water and you want to use that to melt 0. 1 kg of ice. What is the minimum temperature necessary in the water, to just barely melt all of the ice? (Lf = 3. 33 x 105 J/kg, cwater 4186 J/kg°C)

Answers

To determine the minimum temperature required to melt 0.1 kg of ice using 1 kg of water, we can utilize the concept of heat transfer and the specific heat capacity of water. The approximate value is 7.96[tex]^0C[/tex]

The process of melting ice requires the transfer of heat from the water to the ice. The heat needed to melt the ice can be calculated using the latent heat of fusion (Lf), which is the amount of heat required to convert a substance from a solid to a liquid state without changing its temperature. In this case, the Lf value for ice is[tex]3.33 * 10^5[/tex] J/kg.

To find the minimum temperature necessary in the water, we need to consider the heat required to melt 0.1 kg of ice. The heat required can be calculated by multiplying the mass of ice (0.1 kg) by the latent heat of fusion ([tex]3.33 * 10^5[/tex] J/kg). Therefore, the heat required is [tex]3.33 * 10^4[/tex] J.

Next, we need to determine the amount of heat that can be transferred from the water to the ice. This is calculated using the specific heat capacity of water (cwater), which is 4186 J/kg[tex]^0C[/tex]. By multiplying the mass of water (1 kg) by the change in temperature, we can find the heat transferred. Rearranging the equation, we find that the change in temperature (ΔT) is equal to the heat required divided by the product of the mass of water and the specific heat capacity of water.

In this case, ΔT = [tex](3.33 * 10^4 J) / (1 kg * 4186 J/kg^0C) = 7.96^0C[/tex]. Therefore, the minimum temperature necessary in the water to just barely melt all of the ice is approximately 7.96[tex]^0C[/tex].

Learn more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ11

A 1300 kg car starts at rest and rolls down a hill from a height of 10 m. how much kinetic energy?

Answers

The car's kinetic energy at the bottom of the hill is approximately 127,400 J.

The potential energy the car has at the top of the hill due to its mass and height above the ground is given by the formula:

Ep = mgh

where m is the mass of the car (1300 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height of the hill (10 m).

Plugging in the values, we get:

Ep = (1300 kg) × (9.8 m/s²) × (10 m) = 127,400 J

At the bottom of the hill, all of the potential energy is converted to kinetic energy. Therefore, the car's kinetic energy at the bottom of the hill is also 127,400 J.

The formula for kinetic energy is:

Ek = ½mv²

where v is the velocity of the car. Since the car started from rest, its initial velocity was 0 m/s. Using conservation of energy, we can equate the potential energy at the top of the hill to the kinetic energy at the bottom of the hill:

Ep = Ek

mgh = ½mv²

Simplifying and solving for v, we get:

v = √(2gh)

Plugging in the values, we get:

v = √(2 × 9.8 m/s² × 10 m) ≈ 14 m/s

Finally, we can calculate the kinetic energy at the bottom of the hill:

Ek = ½mv² = ½ × (1300 kg) × (14 m/s)² ≈ 127,400 J

learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

A laser beam with a wavelength of 480 nm illuminates two 0.15-mm-wide slits separated by 0.40mm. The interference pattern is observed on a screen 2.3 m behind the slits.
- What is the light intensity, as a fraction of the maximum intensity I0, at a point halfway between the center and the first minimum?

Answers

The intensity of the light at this point is zero, meaning there is complete destructive interference.

The intensity of the light at a point halfway between the center and the first minimum can be calculated using the formula:

I = I0cos²(πd sinθ/λ)

where I0 is the maximum intensity, d is the distance between the slits, λ is the wavelength of the light, and θ is the angle between the direction from the slits to the point on the screen and the line perpendicular to the slits.

At a point halfway between the center and the first minimum, θ = sin⁻¹(λ/2d), which can be plugged into the formula to get:

I = I0cos²(π/2)

 = I0(0)

As a result, the intensity of the light at this spot is zero, indicating full destructive interference. The dark fringe at this point is the first minimum of the interference pattern, where the amplitude of the waves from the two slits cancel each other out.

To know more about the Wavelength, here

https://brainly.com/question/13049991

#SPJ4

elements in the second group are extremely reactive they are called

Answers

Elements in the second group of the periodic table are called alkaline earth metals. They are highly reactive due to their tendency to lose two electrons and form a 2+ cation, which makes them good reducing agents.

This reactivity increases down the group as the atomic radius increases and the ionization energy decreases, making it easier for the outermost electrons to be lost. The alkaline earth metals also have relatively low electronegativity, which means they tend to form ionic compounds with nonmetals. These properties make them important elements in various applications, such as in the production of aluminum, the manufacturing of fertilizers, and in medical imaging. However, their reactivity also makes them potentially hazardous if mishandled or improperly stored.

Learn more about  ionization energy here;

https://brainly.com/question/29203628

#SPJ11

The elements in the second group of the periodic table are called alkali earth metals.

The elements in the second group of the periodic table are extremely reactive and are called alkali earth metals. the components in the second gathering of the occasional table are very receptive and are called soluble earth metals because of their propensity to promptly lose their two valence electrons and structure compounds with different components.

Learn more about alkali earth metals here:

https://brainly.com/question/34210362

#SPJ12

Two boxes with masses 2 kg and 8 kg are attached to the ends of a meter stick. At which of the following distances from the 2 kg box should a fulcrum be placed to balance the meter stick so it doesn't rotate? th 40 m 20 m .60 m O .80 m

Answers

The fulcrum should be placed at 0.80 m from the 2 kg box to balance the meter stick.

In order for the meter stick to balance without rotating, the torques on both sides of the fulcrum must be equal.

The torque is calculated as the product of the force and the distance from the fulcrum.

Since the masses of the boxes are known, we can calculate the forces acting on each side of the meter stick due to gravity using the formula

F = mg

where g is the acceleration due to gravity (9.8 m/s^2).

Let x be the distance from the 2 kg box to the fulcrum.

Then, the distance from the 8 kg box to the fulcrum is (1 - x), since the total length of the meter stick is 1 meter.

Thus, the torque on the left side of the fulcrum is (2 kg)(9.8 m/[tex]s^2[/tex])(x), and the torque on the right side of the fulcrum is (8 kg)(9.8 m/[tex]s^2[/tex])(1 - x).

Setting these torques equal and solving for x, we get:

(2 kg)(9.8 m/[tex]s^2[/tex])(x) = (8 kg)(9.8 m/[tex]s^2[/tex])(1 - x)

19.6x = 78.4 - 78.4x

98x = 78.4

x = 0.8 meters

Therefore, the fulcrum should be placed at a distance of 0.8 meters from the 2 kg box to balance the meter stick without rotation.

For similar question on fulcrum

https://brainly.com/question/21577134

#SPJ11

To balance the meter stick so it doesn't rotate, we need to find the fulcrum position where the torques due to the masses of the boxes are equal. The torque is the product of the force (mass × gravitational acceleration) and the distance from the fulcrum.

Let F1 be the force due to the 2 kg box and F2 be the force due to the 8 kg box. Let d be the distance from the 2 kg box to the fulcrum. Since the meter stick is 1 meter long, the distance from the 8 kg box to the fulcrum is (1 - d).

Now, set up the equation for the torques being equal:

F1 × d = F2 × (1 - d)

Since the gravitational acceleration is the same for both boxes, it cancels out in the equation, and we can write:

2 kg × d = 8 kg × (1 - d)

Now, solve for d:

2d = 8 - 8d
10d = 8
d = 0.8 meters

Therefore, the fulcrum should be placed at 0.8 meters (80 cm) from the 2 kg box to balance the meter stick so it doesn't rotate.

Learn more about gravitational acceleration here : brainly.com/question/14374981

#SPJ11

Other Questions
the strong positive correlation between testosterone levels and aggressive behavior could reflect all of the following except How would you make the following phrase possessive if only one boss makes a decision?Bosses decisionBoss decisionBosss decisionChoose the correctly punctuated sentence. in an aqueous solution of a certain acid with pka = 2.52 the ph is 1.91. calculate the percent of the acid that is dissociated in this solution. round your answer to 2 significant digits. PLEASE HELP WITH THIS BIOLOGY QUESTION control helps an organization____increases profitability. detect opportunities. prevent environmental changes. cover-up errors and irregularities. Which form of nitrogenous compound is not bioavailable to any eukaryotes? (A) amino acids, (B) nucleic acids, (C) ammonium ion, (D) nitrate, (E) nitrogen gas. True/False- If the obtained F value = .77 and the critical F value = 3.40, the researcher would reject the null hypothesis.- The F-test is the ratio of the variance within groups over the variance between groups.- If a researcher has found the F statistic is significant they must then conduct an eta-squared test to be able to report which groups means are significantly different from other group means.- ANOVAs are useful for independent variables that have more than two values because this test assumes that the samples means are independent.- In ANOVA, it is possible to have negative values for the sums of squares and the mean squares. Mortgage payments are _____ on a 15-year fixed-rate mortgage than on a 30-year fixed-rate mortgage, and _____ is paid on a 15-year mortgage than on a 30-year mortgage, ceteris paribus.a. higher; more interestb. higher; less interestc. lower; more interestd. lower; less interest Marisol consults with middle managers to determine how decision making may be improved in their corporations Marisol specializes in ____ psychology 33. Technical considerations for abdominal imaging of obese patients include all of the following except1. increasing kV will increase the penetrability of the photons.2. increasing kV will increase the amount of scatter radiation directed toward the IR.3. mAs should be doubled for every 2 cm of added tissue.4. kV should be increased by 2 for every 2 cm of added tissue.a. 1 and 2 onlyb. 1, 2, and 4 onlyc. 3 and 4 onlyd. 2, 3, and 4 only The farthest point in the future considered in decision making. application firewalls improve security by shielding internal servers and resources from direct access by outside users., True/False Give the state diagram of a Turing machine that decides the following languages over = {0,1}: a. {w : w contains both the substrings 011 and 101 } b. {w: w contains at least two 0's and exactly two 1's c. {0^m1^n: m>n0} what trend is threatening the survival of the zoroastrian community? 5 different of between nation and Society the commodities market is used to trade which of the following items? In which situation would it be least likely for a scientist to revise her experimental methods?O if her results support her hypothesisif her data do not support her hypothesisif no conclusions can be drawn from the dataO if results are the same after repeating the procedureSave and ExitNext3Submit While troubleshooting a computer, when might you inter the CMOS setup?write at least 3 reason When considering the ____ influence on language, a number of experts believe that language is a very recent human ability. Which statements about mutations are true ? Check all that apply Mutations cannot be passed from generation to generation, mutations are rare, mutations are always harmful , Germaine mutations occur in body cells,