Consider a 35-L evacuated rigid bottle that is surrounded by the atmosphere at 100 kPa and 22 ℃. A valve at the neck of the bottle is now opened and the atmospheric air is allowed to flow into the bottle. The air trapped in the bottle eventually reaches thermal equilibrium with the atmosphere as a result of heat transfer through the wall of the bottle. The valve remains open during the process so that the trapped air also reaches mechanical equilibrium with the atmosphere. Determine the net heat transfer through the wall of the bottle during this filling process. -pinterest\.\*

Answer:

plenty of exercise

Explanation:

If you are unhealthy or not happy with yourself. try this. Do a 30 minute walk everyday and eat normal amounts of food portions a human should have an in a day. Make sure you drink plenty of water. If that doesn't work maybe taking to someone about it and see what information they have for you. These things do work because i was over weight and lost 73 pound just by doing those few things.

Answer:

150 km/h

Explanation:

It is given that,

Speed of a bus is 100 km/h and it can carry a maximum of 6 persons.

If speed of bus decreases in fixed proportion with increase in number of person, then we need to find the speed when 3 person are traveling in bus.​

6 person = 100 km/h

1 person = (100/6) km/h

Ans

3 person = [tex]\dfrac{100}{6}\times 3=50\ km/h[/tex]

Net speed = 100 km/h + 50 km/h = 150 km/h

Hence, if the required speed is 150 km/h.

Answer:

30

Explanation:

Plug in p to get 4(8) - 2

32 - 2 = 30

Time required to complete 60m:-

[tex]\\ \rm\longmapsto s=1/2at^2[/tex]

[tex]\\ \rm\longmapsto 60=1.99/2t^2[/tex]

[tex]\\ \rm\longmapsto 120=1.99t^2[/tex]

[tex]\\ \rm\longmapsto t^2=60.3[/tex]

[tex]\\ \rm\longmapsto t\approx 7.7s[/tex]

Time taken to complete last 40m

[tex]\\ \rm\longmapsto 80=-0.266t^2[/tex]

[tex]\\ \rm\longmapsto t^2=300.75[/tex]

[tex]\\ \rm\longmapsto t\approx 17.3s[/tex]

Total time:-

Answer:

Explanation:

Two kinematics equation

v = u + at

and

s = ut + 1/2(at^2)

where u is initial velocity, v is final velocity, a is acceleration, t is time and s is displacement.

For the first 60m, initial velocity is 0 and acceleration is 1.99.

60 = 0 + 1/2(1.99)t^2

t^2 = 120/1.99

t = 7.765s

Velocity at 60m = 0 + 1.99(7.765) = 15.453 m/s

For the final 40m, initial velocity = 15.453, acceleration is -0.266.

40 = 15.453t' + 1/2(-0.266)t'^2

0.133t'^2 - 15.453t' + 40 = 0

Using the quadratic formula, t' = 2.649s or 113.54s

The solution of 113.54s represents someone running pass the finish line and continuing the deceleration until one runs backwards to the finish line again. So that solution should be rejected.

The total time taken = 7.765 + 2.649

= 10.414s

The range of force exerted at the end of the rope is 285.7 N to 1,000 N.

The net horizontal force of the cylinder when it is at equilibrium position is determined by applying Newton's second law of motion.

∑F = 0

F - μFn = 0

F - 0.2(5,000) = 0

F - 1,000 = 0

F = 1,000 N

The strength of the applied force increases as the number of turns of the rope increases.

minimum force = total force/number of turns of rope

minimum force = 1,000/3.5

minimum force = 285.7 N

Thus, the range of force exerted at the end of the rope is 285.7 N to 1,000 N.

Learn more about Newton's second law of motion here: https://brainly.com/question/3999427

Answer:

304.87 m/s

Explanation:

v2 = v1 × √T2÷√T2

v2 = 330 × √233÷√273

v2 = 304.87 m/s

Answer: a = 30 m/s^2

t = .33 s

Explanation:

(v final)^2 = (v initial)^2 + 2*a*d → 20^2 = 10^2 + (2)(a)(5) → a = 30 m/s^2

Acceleration = change in velocity / time → 30 = (20 - 10) / t → t = .33 s :)

Answer: the acceleration is (g( 1 - sinθ)) / 2

Explanation:

the tension in one bag is expressed as;

T = ma + mg sin θ ........................lets say equ 1

now the tension in another bag is expressed as;

T = -ma + mg..................lets say equ 2

so equate both equations

ma + mg sinθ = -ma + mg

2ma =  mg ( 1 - sinθ)

a = (g( 1 - sinθ)) / 2

therefore the acceleration is (g( 1 - sinθ)) / 2

The relativistic momentum of the rocket differ from the ordinary momentum by a factor of 1.2m.

The relativistic momentum of the rocket is calculated as follows;

[tex]P = \frac{mv}{\sqrt{1- \frac{v^2}{c^2} } } \\\\P = \frac{m(12010)}{\sqrt{1- \frac{(12010)^2}{(3\times 10^8)^2} } } \\\\P = 12,011.2 m \ (kgm/s)[/tex]

where;

The ordinary momentum of the rock is calculated from the product of mass and velocity of the rocket.

P = mv

P = 12010m (kgm/s)

ΔP = 12,011.2m - 12,010m

ΔP =  1.2m

Thus, the relativistic momentum of the rocket differ from the ordinary momentum by a factor of 1.2m.

Learn more about relativistic momentum here: https://brainly.com/question/9864983

Answer:

Choice a. Approximately [tex]0.83\; \rm A[/tex] on average.

Explanation:

The electric current through a wire is the rate at which electric charge flows through a cross-section of this wire.

Assume that electric charge of size [tex]Q[/tex] flowed through a wire cross-section over a period of time [tex]t[/tex]. The average current in that wire would be:

[tex]\displaystyle I = \frac{Q}{t}[/tex].

For this question:

Therefore, the average current in this circuit would be:

[tex]\displaystyle I = \frac{Q}{t} = \frac{500\; \rm C}{10\; \text{minutes}} = 50\; \rm C /\text{minute}[/tex].

However, the units in the choices are all in [tex]\rm A[/tex] (for Amperes.) One Ampere is equal to one [tex]\rm C / \text{second}[/tex]. It will take some unit conversations to change the unit of [tex]I = 50\; \rm C/ \text{minute}[/tex] (coulombs-per-minute) to coulombs-per-second.

[tex]\begin{aligned}I &= 50\; \rm C/ \text{minute} \\ &= \frac{50\; \rm C}{1\; \rm \text{minute}} \times \frac{1 \; \text{minute}}{60\; \rm \text{seconds}} \approx 0.83\; \rm C/ \text{second} = 0.83 \; \rm A\end{aligned}[/tex].

Hence, the most accurate choice here would be choice a.

Answer:

10.2 % efficiency.

Explanation:

Percent efficiency formula: (output / input) * 100%

The output energy (in Joules) is how much was used eventually. - It is 10 J

The input energy (in Joules) is how much energy was put into the lightbulb initially. It is 98 J

(10 J / 98 J) * 100% = 10.2 % efficiency.

Answer:

6.75m

Explanation:

To calculate the distance in this question, we can use the formula:

S = ut + 1/2at^2

Where; S = distance

u = initial velocity = 0m/s

t = 3s

a = 1.5m/s^2

Hence:

S = (0 × 3) + 1/2 (1.5 × 3 × 3)

S = 0 + 1/2 (13.5)

S = 13.5/2

S = 6.75

Therefore, the car will travel 6.75m in 3seconds.

To find the distance traveled by the car in 3 seconds is equal to 6.75 meters.

Given the following data:

To find the distance traveled by the car in 3 seconds, we would apply the second equation of motion:

Mathematically, the second equation of motion is given by the formula;

[tex]S=ut +\frac{1}{2} at^2[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]S=0(3) +\frac{1}{2} \times 1.5 \times 3^2\\\\S=\frac{1}{2} \times 1.5 \times 9\\\\S = 1.5 \times 4.5[/tex]

Distance, S = 6.75 meters.

Read more on acceleration here: https://brainly.com/question/24728358

Answer:

Parallelogram law of vector addition states that. if two vectors are considered to be the adjacent sides of a parallelogram, then the resultant of the two vectors is given by the vector that is diagonal passing through the point of contact of two vectors.

Answer:

Gravity,momentum & friction are examples of FORCE.

Explanation:

Hope this helps you

Do mark me as brainliest

Answer:

a. Muscular endurance

is correct answer

please mark me as brainliest

The process of transcription and translation forms part of the central dogma of molecular biology which describes protein synthesis from genes.

Transcription is the process whereby RNA molecules are synthesized from DNA.

The RNA produced is messenger RNA written as mRNA

The mRNA produced is used then used to synthesize proteins at the ribosomes in a process known as translation.

Amino acids which are used to make the proteins are code for by three nucleotides known as codons.

Therefore, the process of transcription and translation is used for protein synthesis from genes.

Learn more about transcription and translation at: https://brainly.com/question/21440478

Answer:

The atomic number uniquely identifies a chemical element. It is identical to the charge number of the nucleus. In an uncharged atom, the atomic number is also equal to the number of electrons. The sum of the atomic number Z and the number of neutrons N gives the mass number A of an atom.

Explanation:

Answer:

I believe that the atomic number of an atom represents the number of protons in one atom of an element. It also tells you the number of electrons in a neutral atom of that element

Explanation:I hope that this is helpful.

Answer:

D lithosphere colliding

Reason:

Image result for what causes the formation of trenches in Earth’s crust

Trenches are formed by subduction, a geophysical process in which two or more of Earth's tectonic plates converge and the older, denser plate is pushed beneath the lighter plate and deep into the mantle, causing the seafloor and outermost crust (the lithosphere) to bend and form a steep, V-shaped depression.

The formation of trenches in Earth's crust is caused by the collision of lithospheric plates, so the correct answer is "lithosphere colliding."

Trenches are long, narrow depressions or canyons in the Earth's crust that form at subduction zones, where one lithospheric plate is forced beneath another plate into the Earth's mantle. Trenches are primarily found on the ocean floor, where they can be several kilometers deep and hundreds of kilometers long.

Trenches are formed by the process of subduction, which occurs when one tectonic plate moves beneath another plate. As the denser plate sinks into the mantle, it creates a deep trench in the ocean floor. This process is associated with volcanic activity, as the sinking plate often triggers the melting of rock in the mantle, which can then rise to the surface and form volcanic islands or arcs.

Trenches are important features of the Earth's crust because they provide evidence for the movement and interaction of tectonic plates over time. Additionally, they are often associated with earthquakes and can serve as warning signs of potential seismic hazards in the surrounding region.

Therefore, lithosphere colliding causes the formation of trenches in Earth’s crust.

To know about the eclipse click:

https://brainly.com/question/3238831

#SPJ5

Answer:

Explanation:

To solve this problem we need to know the direction in which the ball was moving to start with.

The answer will be different depending n the original angle of the ball's movement.

It might be reasonable to assume that the ball is meant to approach along the x-axis,

but if so, the initial speed of 6.42m/s would be irrelevant to the answer.

So I will solve the problem for the general case of two objects colliding at arbitrary angles, and

tell you how to specialize it for any assumption about the initial conditions.

Let

m1 = 7.5 kg be the mass of the ball,

m2 = 1.6 kg be the mass of the pin,

v1 = 6.42 m/s be the velocity of the ball before the strike,

v2 = 0 m/s be the velocity of the pin before the strike,

α1 be the angle of v1,

α2 be the angle of v2,

w1 be the velocity of the ball after the strike,

w2 = 14.8 m/s be the velocity of the pin after the strike,

β1 be the angle of w1,

β2 = -47° be the angle of w2.

By conservation of momentum:

m1v1 + m2v2 = m1w1 + m2w2

Since the velocities are vectors, the addition is vector addition, and the equality is vector equality.

"Vector equality" means that the x-coordinates are equal and the y-coordinates are equal.

The problem cares only about y-coordinates, specifically the y-coordinate of w1, which is w1sin(β1).

(In general, the y-coordinate of any vector is obtained by multiplying the vector's norm by the sine of its angle.)

Conservation of momentum in the y-coordinate is then

m1v1sin(α1) + m2v2sin(α2) = m1w1sin(β1) + m2w2sin(β2)

Expressing the sought quantity

w1sin(β1) = (m1v1sin(α1) + m2v2sin(α2) - m2w2sin(β2))/m1

Substituting known quantities:

w1sin(β1) = (7.5×6.42×sin(α1) + 1.6×0×sin(α2) - 1.6×14.8×sin(-47°))/7.5

= (48.15×sin(α1) + 17.3)/7.5

In the above expression we do not know α1.

If we assume that the ball is approaching along the x-axis then α1 = 0, and

w1sin(β1) = 17.3/7.5 = 2.3

Under that assumption the y-component of the ball's final velocity is 2.3 m/s;

being positive, it is opposite the direction of the pin.

Answer:

As per Provided Information

Distance travelled by motorcycle is 420 miles

Time taken by motorcycle is 8.5 hours

we have been asked to determine the average speed of the motorcycle .

[tex] \bf \: Speed_{(Average)} = \cfrac{total \: distance \: travelled}{time \: taken} [/tex]

Now let's put the given value to find the average speed of motorcycle

[tex] \longrightarrow \sf \: Speed_{(Average)} \: = \cfrac{420}{8.5} \\ \\ \\ \longrightarrow \sf \: Speed_{(Average)} \: = \cfrac{4200}{85} \\ \\ \\ \longrightarrow \sf \: Speed_{(Average)} \: = \cancel\cfrac{4200}{85} \\ \\ \\ \longrightarrow \sf \: Speed_{(Average)} \: = 49.41 \: miles \: per \: hour[/tex]

Therefore,

(a) The average kinetic energy of a molecule of an ideal gas is 6.21 x 10⁻²¹ J.

(b) The total random kinetic energy of the molecule in 1 mole of this gas is 3,741.3 J.

(c) The RMS speed of the oxygen molecule is 215.25 m/s.

The average kinetic energy of a molecule of an ideal gas is calculated as follows;

[tex]K .E = \frac{3}{2} K T[/tex]

Where;

[tex]K.E = \frac{3}{2} \times (1.38 066 \times 10^{-23}) \times 300\\\\K.E = 6.21 \times 10^{-21} \ J[/tex]

The total random kinetic energy of the molecule in 1 mole of this gas is calculated as follows;

[tex]K.E = \frac{3}{2} nRT\\\\K.E = \frac{3}{2} (1) (8.314)(300)\\\\K.E = 3,741.3 \ J[/tex]

The RMS speed of the oxygen molecule is calculated as follows;

[tex]K.E = \frac{1}{2} mV_{rms}^2\\\\V_{rms}^2 = \frac{2K.E}{m} \\\\V_{rms} = \sqrt{\frac{2 K.E}{m} }[/tex]

one mole of oxygen gas = 32 g = 0.032 kg

[tex]V_{rms} = \sqrt{\frac{2 \times 741.3 }{0.032} }\\\\V_{rms} = 215.25 \ m/s[/tex]

Learn more about average kinetic energy of gas molecules here: https://brainly.com/question/952575

The effect of black papper on the field is that the black paper have a form of chimney effect. Thid is because the black paper heat up the space between the field and the body in order to allow an upward air current like a chimney. This air current adds to the cooling of the field.

Black paper absorb heat from the surrounding and generate it to current flow in the field.

A field refer to a egion in which each point has a physical quantity like time or gravitational or space which are connected and associated with the region.

Therefore, the black paper allow air current flow.

Learn more about field from the link below.

https://brainly.com/question/24517831

Answer:

No!

Explanation:

The sliver of California west of the San Andreas fault is slowly moving northwestward with the Pacific plate; movement is essentially horizontal.

Answer:

Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.

Explanation:

sorry if this is wrong or is incorrect... but at least I tried right.

Answer:

same velocity

Explanation:

energy is conserved-

KE=PE

Regular exercise and physical activity is responsible for strong muscles and bones.

Exercise and physical activity improves respiratory, cardiovascular, and overall health of an individual. Staying active can help in maintaining a healthy weight, reduce your risk of diabetes, heart disease, and reduce risk for cancers so we can conclude that regular exercise and physical activity is responsible for strong muscles and bones.

Learn more about fitness here: https://brainly.com/question/13490156