In the centre of- mass (CM) frame, the energies of the two decay products are:
[tex]$$ E_1 = \frac{(m-m_2)^2 - p^2}{2m_1}c^2 $$[/tex]
[tex]$$ E_2 = \frac{(m-m_1)^2 - p^2}{2m_2}c^2 $$[/tex]
The momenta of the two decay products are:
[tex]$$ p_1 = \frac{\sqrt{(m^4 - 2m^2(m_1^2+m_2^2) + (m_1^2-m_2^2)^2)}}{2m c} $$[/tex]
[tex]$$ p_2 = -p_1 $$[/tex]
What does Centre of-mass mean?The centre of mass (CM) is a point that represents the average position of mass in a system. In a system of particles, the CM is the point where the weighted average position of all the particles is located. It is a useful concept in physics and engineering because it allows us to simplify calculations of the motion and interactions of the system as a whole.
In the context of particle physics, the CM frame is a reference frame in which the total momentum of a system of particles is zero. This means that the particles are moving with equal and opposite momenta in this frame, and it simplifies the analysis of the system, allowing us to study its properties and interactions. The CM frame is often used in particle accelerators, where high-energy collisions between particles can produce a large number of new particles that move in various directions.
Let the initial particle of mass [tex]$m$[/tex] be at rest in the CM frame. After decay, the two particles will move in opposite directions, each with momentum [tex]$p$[/tex]The total energy of the system is conserved, and it is given by the sum of the energies of the two particles:
[tex]$$ E = E_1 + E_2 $$[/tex]
where[tex]$E_1$[/tex]and [tex]$E_2$[/tex]the energies of the two particles.
The total energy [tex]$E$[/tex] of the system is given by:
[tex]$$ E = \sqrt{(mc^2)^2 + (pc)^2} $$[/tex]
where [tex]$c$[/tex] is the speed of light.
Since the particles are moving in opposite directions, their momenta are equal in magnitude but opposite in direction, i.e., [tex]$p_1 = -p_2 = p$[/tex]. The energies of the particles can be found using the following expression:
[tex]$$ E_i = \sqrt{(m_ic^2)^2 + (p_ic)^2} $$[/tex]
where [tex]$i$[/tex] is the particle index.
Substituting[tex]$p_1 = -p_2 = p$ and $E = E_1 + E_2$[/tex] in the above equations, we get:
[tex]$$ E_1 = \frac{m_1^2c^4 + p^2c^2}{2m_1c^2} $$[/tex]
[tex]$$ E_2 = \frac{m_2^2c^4 + p^2c^2}{2m_2c^2} $$[/tex]
Solving for [tex]$p$[/tex]
[tex]$$ p = \frac{\sqrt{(E^2 - (m_1c^2 + m_2c^2)^2)(E^2 - (m_1c^2 - m_2c^2)^2)}}{2Ec} $$[/tex]
The momenta of the two particles in the CM frame are given by:
[tex]$$ p_1 = \frac{\sqrt{(E^2 - (m_1c^2 + m_2c^2)^2)}}{2c} $$[/tex]
[tex]$$ p_2 = \frac{\sqrt{(E^2 - (m_1c^2 - m_2c^2)^2)}}{2c} $$[/tex]
To know more about Centre of mass(CM), visit:
https://brainly.com/question/28021242
#SPJ4
Which statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy? Hint: look at the equation for KE.
Because kinetic energy is directly proportional to the square of the velocity.
Why does the quadruples its kinetic energy?The increase in kinetic energy of an object is proportional to the square of its velocity.
This relationship is described by the equation;
KE = ¹/₂mv²
where;
KE is the kinetic energy, m is the mass of the object, and v is its velocity.When an object accelerates from 20 mph to 40 mph, its velocity increases by a factor of 2. Squaring this factor of 2 results in an increase in kinetic energy by a factor of 4 (2² = 4).
Therefore, the kinetic energy of the object is quadrupled as it increases its velocity from 20 mph to 40 mph.
Learn more about kinetic energy here: https://brainly.com/question/8101588
#SPJ1
The complete question is below:
Which statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy? Hint: look at the equation for KE.
A. Because kinetic energy is directly proportional to the cube of the velocity.
B. Because kinetic energy is directly proportional to the square of the velocity.
The statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy is:
Kinetic energy is directly proportional to the square of the velocity.
The correct option is A.
What is kinetic energy?The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Mathematically:
Kinetic energy = ¹/₂ mass * velocity²
Hence, when the velocity of a body is doubled, the kinetic energy of the body quadruples.
Learn more about kinetic energy at: https://brainly.com/question/30337295
#SPJ1
Complete question:
Which statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy? Hint: look at the equation for KE.
Kinetic energy is directly proportional to the square of the velocity.
Kinetic energy is inversely proportional to the square of the velocity.
Kinetic energy is directly proportional to the fourth power of the velocity. Kinetic energy is inversely proportional to the fourth power of the velocity.
1. Given: a = 15 [326° from +x], b= 21 [192º from + x]
Find: c=a+b (round the answer to two decimal places)
The value of c + a+b will be c = -8 for the given polar coordinates.
What are polar coordinates?The polar coordinate system is a two-dimensional coordinate system in mathematics in which each point on a plane is determined by a distance from a reference point and an angle from a reference direction. The pole is the reference point, and the polar axis is the ray from the pole in the reference direction.
Given that the coordinates are a = 15 [326° from +x], b= 21 [192º from + x].
The value of a + b will be calculated as;-
c = a + b
c = ( 15 x cos(326) + 21 x cos(192)
c = 12.43 - 20.54
c = -8.11
Therefore, the solution for the coordinates is -8.11.
To know more about polar coordinates follow
https://brainly.com/question/14965899
#SPJ1
True or False: The longer a pendulum is, the longer it takes to swing. Therefore, when the pendulum of a clock is lengthened, the clock slows down.
Yes, it is true, the longer a pendulum is, the longer it takes to swing. Therefore, when the pendulum of a clock is lengthened, the clock slows down.
The length of a pendulum influences the time it takes to complete one swing, which is referred to as the period. The pendulum swings more slowly and has a longer period as it gets longer. A clock slows down when the pendulum is stretched because it takes longer for each swing to be completed. Similar to how the clock speeds up when the pendulum is shorter, it swings quicker as well. The operation of pendulum clocks and other timekeeping instruments that employ pendulums to measure time is based on this idea.
A pendulum's period, or how long it takes to complete one full swing back and forth, can be used to define how it moves. The length, gravitational acceleration, and angle of displacement are some of the variables that affect a pendulum's period. However, the length of a particular pendulum is what essentially determines its period.
The period of a basic pendulum is described mathematically as
T = 2(L/g), where T is the period, L is the length of the pendulum, and g is the gravitational acceleration.
As you can see, the square root of the length and the period are precisely proportional. This implies that the period likewise grows as the pendulum's length does.
The pendulum offers a means of controlling the clock's timekeeping mechanism. The clock's hands are moved by a gear train that is moved back and forth by the pendulum. The pendulum's length can be changed by the clockmaker to alter the clock's rate of movement. The pendulum can be shortened to make it swing more quickly and speed up the clock if it is running quickly. The pendulum can be stretched to make it swing more slowly and slow down the clock if it is operating slowly.
For more question on pendulum click on
https://brainly.com/question/26524032
#SPJ4
A box with a of mass 3.0 kg slides down a rough vertical wall. The gravitational force on the box is 29.4 N. When the box reaches a speed of 2.5 m/s, you start pushing on one edge of the box at a 45∘ angle with a constant force of magnitude Fp= 23.0 N. There is now a frictional force between the box and the wall of magnitude 13.0 .
Assuming that the angle at which you push on the edge of the box is again 45 ∘, with what magnitude of force Fp should you push if the box were to slide down the wall at a constant velocity? Note that, in general, the magnitude of the friction force will change if you change the magnitude of the pushing force. Thus, for this part, assume that the magnitude of the friction force is f=0.516Fp
2.8s after you have started pushing the velocity is 2.6m/s (I don't know if this helps but it is what I had to find in the part right before this question)
The maximum height achieved by the body is h = v√(1/2g).
Who is the formula to find the potential energy near earth's surface?The formula to find the potential energy near earth's surface is -
U = mgh
Given is to identify the maximum height to which the object will rise.
Using the energy conservation, we can write -
1/2mv² = mgh
1/2v² = gh
h = v√(1/2g)
Therefore, the maximum height achieved by the body is h = v√(1/2g).
To solve more questions on energy conservation, visit the link-
brainly.com/question/29014197
#SPJ1
For a mammal, the average time it takes for blood to circulation the body and return to the heart is given by the function C(m)=18m0.23 C ( m ) = 18 m 0.23 , where C C is the circulation time in seconds and m m is the mass of the mammal in kilograms. Find the circulation time for a mammal that weighs 90 kilograms. Then find a formula for C′(m) C ′ ( m ) and evaluate C′(90) C ′ ( 90 ) .
the rate of change in is C'(m)=
C'(90)
C is the duration of the heartbeat in seconds, whereas m is the kilos of the animal. The decrease in is C'(90) occurs at a rate of 0.13 sec kg1.
How would you define mass?A known quantity of inertia, an essential characteristic of all matter, is known as mass in physics. The resistance a body of substance offers to either a modification in its movement or location as a result of the force that is applied is what it is in essence.
Why does matter have mass?The amount of substance in a thing is measured by its mass. Its mass will remain constant regardless of where it is situated in the vast universe. The amount of gravitational force acting on an object is measured by its heaviness, on the other hand.
C(m) = 18 m0.23 sec
C(m = 90 kg) = 18 (90)0.23 sec
= 50.67 sec
C (m) = 18m0.23
C' m = dc/dm
= 18 (0.23) m0.23⁻¹
= 4.14 m⁻⁰·77
C' (90kg) = 0.13 sec kg⁻¹
To know more about mass visit:
https://brainly.com/question/18064917
#SPJ4
question 13: kirchhoff laws, vir for the voltage source . for the resistor . for the current source determine the voltage, current, and power dissipated for the resistor. (within three significant digits) (within three significant digits) (within three significant digits)
Kirchhoff's laws are fundamental principles in electrical circuit theory.
What are Kirchhoff laws?Your question is incomplete but you seem to want to know something about Kirchhoff's laws hence I will describe it generally.
Kirchhoff's laws are fundamental principles in electrical circuit theory. Kirchhoff's first law, also known as the law of conservation of current, states that the sum of currents entering any node or junction in a circuit must be equal to the sum of currents leaving that node.
Kirchhoff's second law, also known as the voltage law, states that the sum of voltage drops around any closed loop in a circuit must be equal to the sum of the voltage sources in that loop. These laws are used to analyze and design electrical circuits.
Learn more about Kirchhoff laws:https://brainly.com/question/30400751
#SPJ1
A student a model of isostatsy by placing a block of soon in a beaker
To answer the question: "A student made a model of isostasy by placing a block of wood in a beaker of water how can a student demonstrate isostaic rebound using her model?" If she "Press the block down and let go
What is Isostasy?The state of gravitational equilibrium between the Earth's crust and mantle known as isostasy or isostatic equilibrium causes the crust to "float" at an elevation that is dependent on its thickness and density.
This idea is used to explain how various topographic heights can occur on the surface of the Earth.
Hence, to test the model she has, she should press the block down and let go
Read more about isostasy here:
https://brainly.com/question/4347729
#SPJ1
A student made a model of isostasy by placing a block of wood in a beaker of water how can a student demonstarte isostaic rebound using her model
A. Blow vigorously on the block
B. Press the block down and let go
C. Add water until the beaker overflow
D. Pour out all the water
A solid nonconducting sphere is inside a solid nonconducting spherical shell, as shown in the figure. A total charge +Q is evenly distributed throughout the sphere and is also evenly distributed throughout the shell. Which of the following statements is a correct claim about the electric field at point X between the sphere and shell and has a valid supporting statement?
(A). The electric field points to the left, because the electric field from sphere is zero and the electric field from the shell is directed to the left (B). The electric field points to the left, because a Gaussian sphere concentric with the sphere X on its surface only encloses the charge on the inner sphere. (c). The electric field points to the right, because the electric field from the shell has a larger magnitude that the electric field from the sphere (d). The electric field is zero, because a Gaussian sphere concentric with the sphere with X on its surface encloses zero net charge.
(E). The electric field is zero, because point X is inside a nonconducting shell.
The correct claim about the electric field at point X between the sphere and shell is option (d). The electric field is zero, because a Gaussian sphere concentric with the sphere with X on its surface encloses zero net charge.
According to Gauss's law, the electric field at a point in space is proportional to the net charge enclosed by a Gaussian surface around that point. In this case, a Gaussian sphere concentric with the sphere with point X on its surface will enclose the charges on both the inner sphere and the outer shell. However, since the total charge on both objects is equal and opposite, the net charge enclosed by the Gaussian surface is zero, and therefore, the electric field at point X is zero. The fact that point X is inside a non-conducting shell (as stated in option E) is not relevant to the electric field at that point. Option A is incorrect because the electric field from the shell is directed outward, away from the center, not to the left. Option B is also incorrect because the Gaussian surface will enclose the charges on both the inner sphere and the outer shell, not just the charges on the inner sphere. Option C is incorrect because the magnitudes of the electric fields from the sphere and shell do not determine the direction of the electric field at point X.
Learn more about Gauss’ Law here brainly.com/question/14767569
#SPJ4
4) A ball is thrown with an initial velocity of 25.2 m/s at 52.0° above the horizontal from the
top of a cliff 95.0 m high. Find: (a) the time of flight; (b) the maximum height; (c) the
horizontal range; (d) the velocity on hitting the ground
a) The time of flight is 4.04 seconds.
b) The maximum height is 115 meters
c) The horizontal range is 63.3 meters.
d) velocity of hitting the ground is 35.35 m / s.
What is a projectile motion?Projectile motion is a type of motion experienced by an object or particle that is launched in a gravitational field, such as from the Earth's surface, and moves along a curved path solely under the influence of gravity.
Given that a ball is thrown with an initial velocity of 25.2 m/s at 52.0° above the horizontal from the top of a cliff 95.0 m high.
a) The time of flight is calculated as:-
t = ( 2usinθ) / g
t = ( 2 x 25.2 x sin52 ) / 9.81
t = 4.04 sec
b) The maximum height is calculated as:-
hm = h + ( usinθ)²/ 2g
hm = 95 + ( 25.2 x sin52)² / ( 2 x 9.81 )
hm = 95 + 20
hm = 115 meters
c) The horizontal range will be,
d = u²sin2θ / g
d = ( 25.2² x sin( 52 x 2 ) / 9.81
d = 63.3 meters
d) The velocity of hitting the ground is calculated as:-
mgh + (1/2 ) mu² = 1/2 mv²
(9.81 x 95 ) + 1/2(25.2)² = v²
v = 35.35 m / s
To know more about projectile motion follow
https://brainly.com/question/15117650
#SPJ1
An electric dipole consists of two charges, ±2.5 µC, separated by 1.0*10^-4m and centered on the origin. If the dipole is oriented along the x axis, what is the electric field at x =15cm?
The electric field at x = 15 cm due to the given electric dipole of two charges ±2.5 µC separated by 1.0*10^-4m and centred on the origin, oriented along the x axis, is approximately 8.8×10^4 N/C, directed along the negative x-axis.
What does an electric dipole mean?
An electric dipole is a pair of electric charges of equal magnitude but opposite sign that are separated by a small distance. The dipole has a net electric charge of zero because the charges are equal and opposite, but it has a permanent electric dipole moment due to the separation between the charges.
The dipole moment is a vector that points from the negative charge to the positive charge and has a magnitude equal to the product of the charge magnitude and the distance between the charges. The dipole moment is often denoted by the symbol "p" and has units of coulomb-meters (c.m).
Electric dipoles are important in many areas of physics and engineering, as they play a role in a wide range of phenomena, such as the interaction of molecules with electric fields, the behaviour of capacitors, and the generation and propagation of electromagnetic waves. They can also be used to create and control electric fields in various applications, including in electrical circuits, in sensors, and in medical devices.
To calculate the electric field at a distance of x = 15 cm from the origin, we need to use the formula for the electric field due to an electric dipole, which is:
E = (1/4πε₀) [2p cosθ / r³]
where ε₀ is the permittivity of free space, p is the dipole moment, θ is the angle between the dipole moment and the position vector, and r is the distance from the dipole to the point where we want to find the electric field.
In this problem, the electric dipole is oriented along the x-axis, which means that the angle θ between the dipole moment and the position vector is zero. We can therefore simplify the formula to:
E = (1/4πε₀) [2p / r³]
where r is the distance from the origin to the point where we want to find the electric field.
The dipole moment is given by:
[tex]p = qd[/tex]
where q is the magnitude of each charge in the dipole and d is the separation between the charges. In this case, q = ±2.5 µC and d = 1.0×10^-4 m, so:
p = (2.5 µC)(2d) = 5 µC·m
Now, substitute the values of p and r into the formula to find the electric field at x = 15 cm:
E = (1/4πε₀) [2p / r³] = (1/4πε₀) [2(5 µC·m) / (0.15 m)³]
Using the value of ε₀ = 8.85×10^-12 C²/N·m², we can evaluate this expression to get:
E = (9×10^9 N·m²/C²) [10 / (0.15 m)³] ≈ 8.8×10^4 N/C
Therefore, the electric field at x = 15 cm due to the given electric dipole is approximately 8.8×10^4 N/C, directed along the negative x-axis.
To know more about Electric Dipole, visit:
https://brainly.com/question/14553213
#SPJ4
If you drew magnetic field lines for this bar magnet, which statement would be true.
A. The magnetic field lines run parallel to the magnet.
B. Field lines loop around the magnet starting at the north pole and ending at the south pole.
C. The field lines start at the south pole and wrap around the north pole.
D. Some lines leave the north pole and some lines leave the south pole. They make straight line paths away from the magnet.
"If we draw magnetic field lines for a magnet, field lines loop around the magnet starting at the north pole and ending at the south pole." Correct option is B.
Magnetic field lines are the fictitious lines that surround a magnet and reveal the magnet's magnetic field pattern. These lines have no beginning or end. They create a closed circuit. Outside of the magnet, they move from North to South, but inside the magnet, they move from South to North.
North and South poles are the two poles of a magnet. The lines along which magnetic force is applied are known as magnetic field lines. Around the magnet, magnetic field lines create closed loops. These lines originate at the North Pole and come to an end at the South Pole. The magnet's strength is greatest close to its poles. The lines are distinct and do not intersect.
To know more about magnets:
https://brainly.com/question/11902971
#SPJ4
The composite wall of an oven consists of three materi-als, two of which are of known thermal conductivity, kA = 20 W/m . K and kc = 50 W/m . K, and known thickness, LA = 0.30 m and LC = 0.15 m. The third material, B, which is sandwiched between materials A and C, is of known thickness, LB = 0.15 m, but unknown thermal conductivity kB. Under steady-state operating conditions, measurements reveal an outer surface temperature of Ts,o = 20degree C, an inner surface temperature of Ts,i = 600degree C, and an oven air temperature of Tinfinity = 800degree C. The inside convection coefficient h is known to be 25 W/m2 . K. What is the value of kB?
The value of KB when KA and KC are given along with their thickness is calculated to be 1.57 W/m.K.
The value of thermal conductivity kA is given as = 20 W/m.
The value of thermal conductivity kC is given as = 50 W/m.
The thickness LA is given as = 0.30 m.
The thickness LB is given as = 0.15 m.
The thickness LC is given as = 0.15 m.
Temperature on the inner surface Ts,0 = 20 degrees
Temperature on the outer surface Ts,i = 600 degrees
Temperature at infinity = 800 degrees
Convection coeffiecient h = 25W/m²
Thermal resistance due to conductivity,
R = L/KA
Thermal resistance due to heat transfer coefficient
R' = L/KA
We know that heat transfer Q
Q = ΔT /Rth
By equating heat,
(600 - 20)/[LA/A KA + LB/B KB + LC/C KC] = (800 - 20)/[LA/A KA + LB/B KB + LC/C KC + 1/Ah]
(600 - 20)/[0.3/20 + 0.15/B KB + 0.15/50] = (800 - 20)/[0.3/20 + 0.15/B KB + 0.15/50 + 1/25]
580/[0.015 + 0.15/ KB + 0.003] = 780/[0.015 + 0.15/ KB +0.003 + 0.04]
580/(0.018 + 0.15/ KB) = 780/(0.058 + 0.15/ KB)
580(0.058 + 0.15/ KB) = 780(0.018 + 0.15/ KB)
33.64 + 87/KB = 14.04 + 117/KB
33.64 - 14.04 = 117/KB - 87/KB
19 = 1/KB (117 - 87)
19 KB = 30
KB = 30/19 = 1.57 W/m.K
To know more about thermal conductivity:
https://brainly.com/question/13450387
#SPJ4
A warehouse worker is pushing a 98 kg crate of medical supplies with a horizontal force of 250 N across the warehouse floor. He encounters a rough horizontal section of the floor that is 0.63 m long and where the coefficient of kinetic friction between the crate and floor is 0.382. Determine the net work done on the crate while it is being pushed across the rough section of the floor.
The net work is done just on crate as it is moved across the uneven part of the floor is W= 882 N.
According to the given data:F= 282 N
μk =0.351 :coefficient of kinetic friction
g = 9.8 m/s² : acceleration due to gravity
Crate weight (W)
W= m*g
W= 90kg*9.8 m/s²
What is the key to finishing projects?The work W is equivalent to the force f twice a distance d, or W = fd, to represent this idea numerically. Work is defined as W = fd cos if the force is exerted at an angle to the displacement.
The resistive friction force (Fr) is divided by the normal or perpendicular force (N) pushing both objects together to produce the friction coefficient (fr), which is a numerical value. It can be described by the formula fr = Fr/N. Keep the block stationary in its horizontal position. the box was subjected to the floor's frictional force as a result is 110 N.
To know more about coefficient of friction visit
brainly.com/question/14121363
#SPJ1
which statements below correctly describes valence bond theory? a. covalent bonds are formed when orbitals of two atoms overlap and share a pair of electrons b. maximizing the overlap makes for stronger bonds (lower potential energy) c. atoms will mix together (hybridize) valence orbitals to maximize overlap. d. hybrid orbital have the exact same shape as the atomic s, p, and d orbitals.
The statements below correctly describe valence bond theory:
a). covalent bonds are formed when orbitals of two atoms overlap and share a pair of electrons.
b). maximizing the overlap makes for stronger bonds (lower potential energy).
c). atoms will mix together (hybridize) valence orbitals to maximize overlap.
What is valence bond theory?Chemistry's valence bond theory describes how atoms establish chemical bonds with one another. This hypothesis states that the sharing of a pair of electrons by two atoms results in the formation of a chemical bond. These electrons are thought to be in a bonding molecular orbital, which is created when the valence atomic orbitals of the involved atoms overlap. The length, directionality, and strength of a chemical connection are all explained by the valence bond hypothesis. Additionally, it is employed to forecast the behavior of chemical reactions and the shape of molecules. Grasp the characteristics and behavior of compounds in chemistry requires an understanding of the valence bond theory.
To know more about valence bond theory, check out:
https://brainly.com/question/29546533
#SPJ4
fill in the blank. A 1.5-m-long aluminum rod must not stretch more than 1 mm and the normal stress must not exceed 40 MPa when the rod is subjected to a 4,5-kN axial load. Knowing that E= 70 GPa, determine the required diameter of the rod. The required diameter of the rod is ___ mm
A 1.5-m-long aluminum rod must not stretch more than 1 mm and the normal stress must not exceed 40 MPa when the rod is subjected to a 4,5-kN axial load. Knowing that E= 70 GPa, determine the required diameter of the rod. The required diameter of the rod is 377 mm
To determine the required diameter of the aluminum rod, we can use the equation for normal stress in a prismatic bar under axial load:
σ = F / A
where σ is the normal stress, F is the axial load, and A is the cross-sectional area of the rod.
To ensure that the normal stress does not exceed 40 MPa, we can set the equation equal to 40 MPa and solve for the required cross-sectional area:
40 MPa = 4,500 N / A
Solving for A, we get:
A = 4,500 N / (40 MPa) = 0.1125 m^2
To ensure that the rod does not stretch more than 1 mm, we can use the equation for axial strain in a prismatic bar under axial load:
ε = ΔL / L
where ε is the axial strain, ΔL is the change in length, and L is the original length of the rod.
We can rearrange this equation to solve for the required change in length:
ΔL = ε * L = (1 mm) * (1.5 m)
= 0.0015 m
Using the equation for axial strain, we can also express the change in length in terms of the normal stress and the material's elastic modulus:
ε = σ / E
ΔL = ε * L = (σ / E) * L
Solving for the required cross-sectional area using this equation, we get:
A = (F * L) / (E * ΔL) = (4,500 N * 1.5 m) / (70 GPa * 0.0015 m) = 0.0893 m^2
Now that we have two equations for the required cross-sectional area, we can set them equal to each other and solve for the diameter:
A = π * d^2 / 4
d = sqrt(4A / π) = sqrt(4 * 0.1125 m^2 / π) = 0.377 m = 377 mm
Therefore, the required diameter of the aluminum rod is 377 mm.
To know more about Stress visit:
https://brainly.com/question/12871096
#SPJ4
A cord is used to vertically lower an initially stationary block of mass M kg at a constant downward acceleration of g/4. The block has fallen a distance d. (Use any variable or symbol stated above as necessary.)
(a) Find the work done by the cord's force on the block.
WF = __________
(b) Find the work done by the weight of the block.
Wg = ___________
(c) Find the kinetic energy of the block.
K = _________
(d) Find the speed of the block.
v = __________
(a) Work done by the cord's force on the block [tex](WF) = Mg/4\times d[/tex]
(b) Work done by the weight of the block [tex](Wg) = Mg/4 \times d[/tex]
(c) Kinetic energy of the block [tex](K) = Mg/2\times d[/tex]
(d) Speed of the block [tex](v) = sqrt(gd/2)[/tex] where g is the acceleration due to gravity and d is the distance the block has fallen.
What is Kinetic energy?Kinetic energy is the energy that an object possesses due to its motion. In other words, if an object is moving, it has kinetic energy. The amount of kinetic energy an object has depends on its mass and velocity. The formula for calculating kinetic energy, K, is:
K = 1/2 mv^2
where m is the mass of the object and v is its velocity. The factor of 1/2 in the formula is due to the work-energy principle, which states that the work done on an object is equal to the change in its kinetic energy. If a force is applied to an object to put it in motion, work is done on the object, and its kinetic energy increases.
The units of kinetic energy are joules (J). One joule is defined as the amount of work done when a force of one newton (N) is applied over a distance of one meter (m). Since work and energy are measured in the same units, the unit of kinetic energy is the same as the unit of work, which is the joule.
Kinetic energy is a scalar quantity, which means it has magnitude but no direction. The kinetic energy of an object increases as its mass and velocity increase.
(a) The work done by the cord's force on the block can be found using the formula:
[tex]WF = force\times distance[/tex]
The force applied by the cord is equal to the tension in the cord, which is equal in magnitude to the weight of the block. Therefore, the force applied by the cord is:
[tex]F = Mg[/tex]
where M is the mass of the block, and g is the acceleration due to gravity.
The distance over which the force is applied is d, the distance the block has fallen. Therefore, the work done by the cord's force on the block is:
[tex]WF = Fd = Mg \times d[/tex]
Substituting g/4 for g
[tex]WF = M(g/4) \times d = Mg/4 \times d[/tex]
Hence, the work done by the cord's force on the block is Mg/4 × d.
(b) The work done by the weight of the block can be found using the formula:
[tex]Wg = force \times distance[/tex]
The weight of the block is equal to its mass times the acceleration due to gravity, which is:
[tex]W = Mg[/tex]
The distance over which the weight is applied is again d. Therefore, the work done by the weight of the block is:
[tex]Wg = Wd = Mg\times d[/tex]
Substituting g/4 for g:
[tex]Wg = M(g/4) \times d = Mg/4 \times d[/tex]
Hence, the work done by the weight of the block is also [tex]Mg/4 \times d.[/tex]
(c) The change in the kinetic energy of the block can be found using the work-energy principle:
Wnet = ΔK
where Wnet is the net work done on the block, and ΔK is the change in the kinetic energy of the block.
The net work done on the block is equal to the sum of the work done by the cord's force and the work done by the weight of the block:
[tex]Wnet = WF + Wg = Mg/4 \times d + Mg/4 \times d = Mg/2 \times d[/tex]
The change in the kinetic energy of the block is equal to the net work done on the block:
ΔK = Mg/2 × d
Since the block starts from rest, its initial kinetic energy is zero. Therefore, the final kinetic energy of the block is equal to the change in kinetic energy:
[tex]K = Mg/2\times d[/tex]
(d) The final speed of the block can be found using the equation for the final kinetic energy:
[tex]K = 1/2 mv^2[/tex]
where m is the mass of the block, and v is its final speed.
Substituting Mg/2 × d for K and M for m
[tex]Mg/2\times d = 1/2 Mv^2[/tex]
Simplifying and solving for v, we get:
[tex]v = sqrt(gd/2)[/tex]
Therefore, the speed of the block is[tex]sqrt(gd/2)[/tex], where g is the acceleration due to gravity and d is the distance the block has fallen.
To know more about Kinetic Energy, visit:
https://brainly.com/question/8101588
#SPJ4
the sun is not located at the center of an elliptical orbit, but is offset somewhat toward one of its ends.T/F
The sun is not located at the center of an elliptical orbit, but is offset somewhat toward one of its ends - True.
The Sun is not relatively at the center of a earth's elliptical route. An cirque has a point a little bit down from the center called the" focus". The Sun is at the focus of the cirque. Because the Sun is at the focus, not the center, of the cirque, the earth moves near to and further down from the Sun every route. The close point in each route is called perihelion. The far down point is called aphelion.
The Sun isn't located at the center of an elliptical route, but is neutralize kindly toward one of its ends. The Greek champion Claudius Ptolemaeus ( Ptolemy) tutored that all heavenly bodies moved in perfect indirect routeways centered on the Earth.
Learn more about Sun's Elliptical orbit:
https://brainly.com/question/15656021
#SPJ4
a rope, under a tension of 232n and fixed at both ends, oscillates in a second-harmonics standing wave pattern. the displacement of the rope is given by
a) The length of the rope is π/4 meters. b) The speed of the waves on the rope is 6π m/s. c) The mass of the rope is 0.485 kg. d) For the third harmonic, the period of oscillation is π/6 seconds.
a) The displacement of the rope oscillates between -0.1 and 0.1 meters. The length of the rope is half of the wavelength of the standing wave pattern, which is given by λ = 2L/n, where L is the length of the rope and n is the harmonic number. For the second harmonic, n = 2, so we have:
λ = 2L/2 = L
The wavelength is π/2 meters, so the length of the rope is:
L = λ/2 = (π/2)/2 = π/4 meters.
b) The speed of the waves on the rope can be determined from the wave equation, v = fλ, where v is the speed of the waves, f is the frequency, and λ is the wavelength. The frequency of the wave is 12 Hz (since it is the second harmonic), so we have:
v = fλ = 12 × (π/2)/2 = 6π m/s.
c) The mass of the rope can be calculated using the formula for the linear density of a string, μ = m/L, where μ is the mass per unit length, m is the total mass of the rope, and L is the length of the rope. The tension in the rope is 232 N, so we have:
v = √(T/μ)
μ = T/v^2 = 232/(6π)^2 = 0.616 kg/m
The mass of the rope is:
m = μL = 0.616 × π/4 = 0.485 kg.
d) For the third harmonic, n = 3, so the wavelength is:
λ = 2L/3
The period of oscillation is given by T = 1/f, where f is the frequency. The frequency for the third harmonic is:
f = v/λ = v/(2L/3) = 3v/2L = 9f0/2,
where f0 is the fundamental frequency (f0 = v/2L). Therefore, the period is:
T = 1/f = 2/(9f0) = 2L/9v = π/(9f0) = π/6 seconds.
Learn more about wavelenghts here: brainly.com/question/13533093
#SPJ4
Complete question:
A rope, under a tension of 232n and fixed at both ends, oscillates in a second-harmonics standing wave pattern. the displacement of the rope is given by
y=0.1sin( πx/2 )sin12πt.
where x = 0 at one end of the rope, x is in meters, and t is in seconds.
a) What is the length of the rope?
b) What is the speed of the waves on the rope?
c) What is the mass of the rope?
d) If the rope oscillates in a third harmonic standing wave pattern, what will be the period of oscillations?
A box initially has 335 J of kinetic energy. After 2.30 s, the final kinetic energy is 125. Calculate the power.
Answer:
Explanation:
The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.
Work done = 335-125=110
Power=work done/time = 110/2.3 = 47.83 watts
with what speed must a ball be thrown vertically from ground level to rise to a maximum height of 50 m? (b) how long will it be in the air? (c) sketch graphs of y, v, and a versus t for the ball. on the first two graphs, indicate the time at which 50 m is reache
The kinematic equation states that a ball must be thrown horizontally from the ground at a speed of 31.30 m/s in order to reach a height limit of 50 m.
When is a ball thrown vertically up to its highest point?Here, we knew that when a ball is hurled vertically upward at maximum height with some velocity, it decelerates to zero and returns to the earth with some velocity. Here, we must apply the calculation for the maximum height when moving vertically upward. Maximum height indicates zero final velocity.
What is the object's vertical speed as it approaches the ground?Gravity causes a downward vertical acceleration with a magnitude of 9.8 m/s/s. A projectile's vertical velocity changes by 9.8 m/s.A projectile's vertical motion is unrelated to its horizontal motion.
To know more about velocity visit :
https://brainly.com/question/18084516
#SPJ4
A block of mass M on an inclined surface is attached to a spring of negligible mass, as shown. The other end of the spring is attached to a wall, and there is negligible friction between the block and the incline. The block is pulled to a position such that the spring is stretched from its equilibrium position. The block is then released from rest. Which of the following systems can be classified as a closed system? (A). A system consisting of the block only (B). A system consisting of the spring and Earth A syster (C). A system consisting of the block and spring (D). A system consisting of the block, spring, and Earth
The correct system that can be classified as a closed system in this scenario is (C). A system consisting of the block and spring.
A closed system is one that does not exchange matter or energy with its surroundings. In this scenario, the block and the spring are the only objects that interact with each other, and there is no energy or matter exchange with the surroundings. Therefore, the system consisting of the block and spring can be considered as a closed system. Options A and B are incorrect because they do not include the spring or the block, respectively, both of which are essential components of the system. Option D is incorrect because it includes the Earth, which is not part of the system and can exchange matter and energy with the block and spring.
Learn more about closed system here brainly.com/question/29991263
#SPJ4
The drivers of two cars having equal speeds hit their brakes at the same time, but car A has four times the acceleration as car B .
Part A
If car A travels a distance D before stopping, how far (in terms of D ) will car B go before stopping?
Express your answer as an integer.
Part B
If car B stops in time T , how long (in terms of T ) will it take for car A to stop?
Express your answer to two significant figures
Car A's time to halt, tA = 0.33T. This is the right response to the question that was asked. The answer has two significant figures.
What is a good illustration of two vehicles with similar speeds but differing velocities?Provide an illustration of two vehicles with similar speeds but differing velocities. Example: Two 40 km/hr automobiles, one heading east and the other north.
If two cars accelerate at the same rate, do they move at the same speed? If not, why not?Equal accelerations do not necessarily imply identical velocities, and vice versa. For instance, even if both of your cars have the same acceleration, if one of them accelerates first, it will certainly go more quickly than the other.
To learn more about acceleration visit:
brainly.com/question/2303856
#SPJ1
Which statements describe elements?
Elements can be
separated using physical means.
Elements are made
of atoms with the same atomic number.
Elements cannot be
separated using ordinary chemical means.
Elements may be represented by chemical symbols.
Elements are made
of two or more different types of atoms.
The correct statements that describe elements are:
Elements can be separated using physical means.Elements are made of atoms with the same atomic number.Elements may be represented by chemical symbols.What is element?
An element is a pure substance made up of only one type of atom. The elements are the basic building blocks of matter and make up everything around us.
There are 118 known elements, which are organized on the periodic table based on their atomic number, electron configurations, and chemical properties.
Each element has unique properties and is defined by its atomic number, which is the number of protons in its nucleus.
Some examples of elements include;
hydrogen, oxygen, carbon, gold, and silverLearn more about elements here: https://brainly.com/question/18096867
#SPJ1
A scale of 1:900,000 is _____________ a scale of 1:24,000:
A - equal to
B - smaller than
C - twice as much as
D - larger than
The stated statement indicates that Scales less than 1:24,000 are 1:900,000 and 1:24,000, respectively.
The correct option is B.
In what sense is a scale defined?a graded object, particularly when used as a rule or measure: a set of markings or points spaced apart at defined intervals used to measure distances, such as: a relationship between the distances shown on a map and their corresponding actual distances (such as the height of the mercury in a thermometer)
What other names do scales go by?To visually depict the scale of a map, maritime chart, engineering design, or architectural drawing, use a linear scale, also known as a bar scale, scale bar, or graphic scale.
To know more about scale visit:
https://brainly.com/question/1287267
#SPJ4
Which of the following changes would increase the strength of the magnetic field?
A. adding a light bulb to the circuit
B. removing the core
C. decreasing the current
D. increasing the number of coils
The strength of the magnetic field will be increased by increasing the number of coils. The correct option is D.
What is a magnetic field?A magnetic field is a vector field that describes the magnetic influence on moving charges, currents, and magnetic materials. A moving charge in a magnetic field is subjected to a force that is perpendicular to both its own velocity and the magnetic field.
An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. Electromagnets usually consist of wire wound into a coil.
By increasing the number of coils there will be more current around the space resulting in a more magnetic field. In this way the strength of the magnetic field is increased.
To know more about magnetic fields follow
https://brainly.com/question/12523229
#SPJ1
A number of positive point charges are placed symmetrically around a circle of radius R. Determine the electric potential at the center of the circle, if there are four point charges, each of charge q. Note: Assume a reference level of potential V = 0 at r = [infinity]. (Use any variable or symbol stated above along with the following as necessary: ke.)
The electric potential difference between the point at the center of the ring and a point on its axis ΔV is 4kQ/R.
Electric potential, the amount of work required to move a unit charge from a reference point against an electric field to a particular point. The reference point is usually ground, but any point that is not subject to electric field charges can be used. potential difference .
Given the data in the question;
electric potential at the center of the ring V₀ = kQ / R
4 point charge are on the circle so
V = 4Qk/R is the electric potential difference at the center of the circle.
know more about electric potential click here;
https://brainly.com/question/24078333
#SPJ4
In the diagram below, point P is located in theelectric field between two oppositely chargedparallel platesCompared to the magnitude and direction of theelectrostatic force on an electron placed at point P,the electrostatic force on a proton placed at point PhasA) the same magnitude and the same directionB) the same magnitude, but the oppositedirectionC) a greater magnitude, but the same directionD) a greater magnitude and the opposite direction
The correct answer is option B.
In the diagram below, point P is located in the electric field between two oppositely charged parallel plates. Compared to the magnitude and direction of the electrostatic force on an electron placed at point P, the electrostatic force on a proton placed at point P has B) the same magnitude, but the opposite direction.
Electrostatic force is a type of force that occurs between two charged particles. The magnitude of this force is determined by the amount of charge on each particle and the distance between them. The direction of the force is determined by the sign of the charges.
If the charges are opposite, the force is attractive and if the charges are the same, the force is repulsive.
In the case of an electron and a proton placed at point P between two oppositely charged parallel plates, the magnitude of the electrostatic force will be the same because they both have the same amount of charge (albeit with opposite signs).
However, the direction of the force will be opposite because the electron and proton have opposite charges.
Therefore, the correct answer to, Compared to the magnitude and direction of the electrostatic force on an electron placed at point P, the electrostatic force on a proton placed at point P has B) the same magnitude, but the opposite direction.
To know more about the electric fields, refer here:
https://brainly.com/question/8705524#
#SPJ11
a 6 x 8 metal plate is resting inside a hemispherical bowl, whose radius is 13. the plate is parallel to the rim of the bowl, which is parallel ot the tabletop
The plate is about 12.65 units away from the top of the bowl, with a contact area of 48 square units on the bottom of the bowl.
The plate is parallel to the rim of the bowl, it is not in contact with the curved surface of the bowl. The area of the plate in contact with the bottom of the bowl can be calculated as the product of its dimensions: 6 x 8 = 48 square units.
The distance between the bottom of the bowl and the top of the plate can be calculated using the Pythagorean theorem. The height of the bowl is the radius, which is 13 units. The width of the bowl can be calculated as the diameter, which is twice the radius, or 26 units. The width of the plate is 6 units, so the distance between the bottom of the bowl and the top of the plate can be calculated as,
sqrt(13^2 - 3^2) = sqrt(160) = 12.65 units
To know more about the hemispherical bowl, here
brainly.com/question/13645703
#SPJ4
organisms are able to maintain their normal internal temperatures because their bodies contain water, which protects them from rapid temperature changes. it is water's heat
Water's high specific heat capacity helps it resist changes in temperature, making it a useful tool for organisms to regulate their body temperature.
How does water regulate the body temperature?
Water helps regulate body temperature through several mechanisms.
Cooling through sweating: When the body becomes too warm, water in the form of sweat is secreted through the sweat glands onto the surface of the skin. As the sweat evaporates, it takes heat away from the body, cooling it down.Retaining heat through shivering: When the body becomes too cold, water in the form of blood is circulated to muscles, which can contract rapidly and generate heat through shivering.Distributing heat through blood flow: Water in the form of blood is circulated throughout the body, carrying heat away from warmer areas and distributing it to cooler areas. This helps maintain a consistent internal temperature.In addition, water's high specific heat capacity allows it to resist changes in temperature, which helps the body maintain a constant internal temperature even in the face of external temperature fluctuations.
To know more about body temperature regulation by water, visit:
https://brainly.com/question/8074264
#SPJ1
five bicyclists are riding at the following speeds: 5.4 m/s, 6.0 m/s, 5.9 m/s, 6.1 m/s, and 7.0 m/s.
At the following speeds, five bicycles are travelling: 5.4 m/s, 6.0 m/s, 5.9 m/s, 6.1 m/s, and 7.0 m/s. These speeds, which are expressed in metres per second, are the cyclists' respective velocities.
Speed is defined in physics as the rate at which a distance changes over time. A scalar quantity with magnitude but no direction, it has neither. In other terms, speed is simply the rate of a moving thing. The answers to the question's bikers' speeds are given in metres per second (m/s). A number of variables, including the force applied, the surface it is on, the presence of friction or air resistance, and the object's weight, can have an impact on an object's speed. It's critical to comprehend speed and how it relates to other physical characteristics in a variety of industries, such as engineering, sports, and transportation.
Learn more about speeds here:
https://brainly.com/question/8881791
#SPJ4