Consider the decay function d(x)=850(0. 94)x. Describe the characteristics of the functions

The new coordinates of the two points after rotating the parallel lines 180 degrees clockwise are (2, -7) and (-8, 5).

What are parallel lines?

In geometry, parallel lines can be defined as two lines in the same plane that are at equal distance from each other and never meet.

If the set of parallel lines contains the points (-2, 7) and (8, -5), then the two lines are parallel to each other and have the same slope. We can find the slope of the line that passes through these two points using the slope formula:

slope = (y2 - y1) / (x2 - x1)

slope = (-5 - 7) / (8 - (-2))

slope = -12 / 10

slope = -6 / 5

So, the equations of the two parallel lines are:

y - 7 = (-6 / 5)(x + 2) --- equation 1

y + 5 = (-6 / 5)(x - 8) --- equation 2

To rotate the lines 180 degrees clockwise, we need to negate both the x and y coordinates of the points on the lines. That is, we need to replace each point (x, y) with the point (-x, -y).

So, after the rotation, the new coordinates of the two points will be:

(-(-2), -7) = (2, -7) --- for point (-2, 7)

(-(8), -(-5)) = (-8, 5) --- for point (8, -5)

Learn more about parallel lines on:

https://brainly.com/question/30097515

#SPJ1

The rate at which the amount of bacteria is changing after 12 hours is 21.698 units/hour.

The given formula for the amount of bacteria present in a medium after t hours is:

[tex]a(t) = 16e^ (0.32t)[/tex]

Now, we need to find out at what rate the amount of bacteria is changing after 12 hours.

This means we need to find out the derivative of a(t) with respect to t and then substitute t = 12 in the derivative formula to get the rate of change of bacteria after 12 hours.

Differentiating the given formula for a(t) with respect to t, we get:

a'(t) = [tex]16(0.32)e^(0.32t)[/tex]

On substituting, t = 12, we get

a'(12) = [tex]16(0.32)e^ (0.32X12)[/tex]

On solving this, we get a'(12) = 21.698.

Therefore, the rate at which the amount of bacteria is changing after 12 hours is 21.698 units/hour.

Learn more about Bacteria here:

https://brainly.com/question/14067407

#SPJ11

The value of x for each circle is calculated as follows:

1. x = 148°

3. x = 82°

4. x = 135°

5. x = 7

8. x = 6

9. x = 13

The Circle identities refer to a set of fundamental identities in trigonometry that relate the six trigonometric functions of an angle in a right-angled triangle.

1. Given, SR = ST

then, arcSR = arcST = x°

and arcRT = 64°

Sum of arc,

x + x +64 =360

x = 148°

3. Given, JK=LM

then, arcJK=arcLM

So, x=82°

4. Given, BA=AC =9

Then, arcBA = arcAC = x°

and arcBC = 90°

Sum of arc,

x + x +90 =360

x = 135°

5. Given, arc are equal then side also equal

2x+4=18

x=7

8. Given that, Circle M similar to circle P, and arc are equal so, side also equal

2x+24=6x

x=6

9. Given that, Circle V similar to circle W,

arcYZ + 198 =360

arcYZ = 162°

Now, arcTU=arcYZ

Then, 9x-78 = 3x

So, x=13

To know more about Circle, visit:

https://brainly.com/question/8952990

#SPJ1

The right answer is provided by: Taking into account the hypothesis tested and the p-value of the test.

There is enough proof to conclude that using drugs X and Y results in different mean cholesterol levels.

What theories are being tested?

If there is no difference in the cholesterol levels, then the null hypothesis is tested, which is:

H₀:Hₓ-H

It is determined whether there is a difference at the alternative hypothesis, so:

H₀:Hₓ-H≠0

The p-value of 0.003 0.01 leads us to reject the null hypothesis and determine that there was a difference, hence the following is the right response:

There is enough proof to conclude that using drugs X and Y results in different mean cholesterol levels.

To know more about hypothesis tests, click the below link

brainly.com/question/26454209

#SPJ4

Answer:

-10 or -4

Step-by-step explanation:

the absolute value of -10 + 7 is 3

the absolute value of -4 + 7 is 3

absolute value just removes the negative sign of what is inside of it.

Therefore, the total number of ways to select 2 cooked and 3 uncooked eggs is 210 ways.

In mathematics, a combination is a way of selecting items from a collection, such that (unlike permutations) the order of selection does not matter. In other words, a combination is a selection of items from a larger set, without regard to the order in which they are chosen. The number of combinations of size r that can be chosen from a set of n elements is denoted by the symbol C(n, r), and is given by the formula:

C(n, r) = n! / (r! * (n-r)!)

where n! (pronounced "n factorial") is the product of all positive integers up to n, and r! is the product of all positive integers up to r.

Here,

a) To find the number of ways to select 2 cooked or 3 uncooked eggs, we need to use the combination formula, which is:

ⁿCₓ= n! / r!(n-r)!

where n is the total number of eggs, r is the number of eggs we want to select, and ! represents factorial.

For 2 cooked eggs, we can select them in:

⁷C₂ = 7! / 2!(7-2)! = 21 ways

For 3 uncooked eggs, we can select them in:

⁵C₃ = 5! / 3!(5-3)! = 10 ways

Therefore, the total number of ways to select 2 cooked or 3 uncooked eggs is:

21 + 10 = 31 ways

b) To find the number of ways to select 2 cooked and 3 uncooked eggs, we need to use the product rule of counting. That is, we need to multiply the number of ways to select 2 cooked eggs and 3 uncooked eggs.

The number of ways to select 2 cooked eggs is:

⁷C₂ = 21 ways

The number of ways to select 3 uncooked eggs is:⁵C₃ = 10 ways

Therefore, the total number of ways to select 2 cooked and 3 uncooked eggs is:

21 x 10 = 210 ways

To know more about combination,

https://brainly.com/question/20211959

#SPJ1

The measure of the side MR is given as 20

We have to first find the value of the angle

∠TQR = 180 - (35 + 25)

= 180 - 60

= 120 degrees

180 - 120 = 60 degrees

angle TPR  = 90 degrees

next we have to find ∠PTQ

= 180 - (90 + 60)

= 180 - 150

= 30 degrees

given that TMN = TQR

TNP = PTQ

So if TMN = 35 degrees since TQR = 35 degrees

PTQ = 30, so TNP = 30 degrees

The measure of QR = 4 since MN = 4

NP = pq

np = 6

Hence the measure of MR

= 4 + 6 + 6 + 4

= 20

Read more on angles here:https://brainly.com/question/25770607

#SPJ1

In response to the stated question, we may state that As a result, the formula for the sequence's nth term is: [tex]a_n = a _1 * r^{(n-1) (n-1)}[/tex]

In mathematics, a sequence is an ordered list of items. Elements can be numbers, functions, or other mathematical objects. A series is commonly expressed by putting the phrases in parentheses and separating them with commas. A natural number series, for example, can be denoted as: (1, 2, 3, 4, 5, ...) Similarly, the even number series is labelled as follows: (2, 4, 6, 8, 10, ...) A series can be finite or infinite depending on whether it has a finite or infinite number of words.

a. Since the difference between subsequent terms is constant, the series 5, 7, 8,... is an arithmetic sequence. The usual difference is 2, specifically. As a result, the formula for the sequence's nth term is:

[tex]a_n = a_1 + (n-1)d[/tex]

where a 1 represents the first term, d represents the common difference, and n represents the term number. Using the provided values, we get:

[tex]a_n = 5 + (n-1)2\\a_n = 2n + 3[/tex]

b. Since the ratio between subsequent terms is constant, the series 6, 30, 150,... is a geometric sequence. The common ratio is 5, specifically. As a result, the formula for the sequence's nth term is:

[tex]a_n = a _1 * r^{(n-1) (n-1)}[/tex]

where a 1 denotes the first term, r the common ratio, and n the term number

[tex]a_n = 6 * 5^{(n-1) (n-1)}[/tex]

To know more about Sequences visit:

https://brainly.com/question/21961097

#SPJ1

Lightbulbs act as resistors. Janine is building a circuit that contains two lightbulbs in parallel. One of the lightbulbs has a resistance of 120 ohms, but the resistance of the second lightbulb is unknown. Therefore, The inverse of Janine's equation is r = -120/(t - 120).

Equation:

An equation is described as a formula that expresses the equality of two expressions, by connecting them with the equals sign. An equation is a formula that expresses that two expressions are equal by joining them with the equal sign =.The word comparison and its cognates in other languages ​​may have subtly different meanings; for example, in French, an equation is defined to contain one or more variables, and in English any well-formed formula composed of two expressions linked by equal signs is an equation.

According to the Question:

In algebra, an equation is a mathematical statement that determines whether two mathematical expressions are equal.

The type of comparison is identity or conditional comparison.

For each potential value, the variable provides an identifier. Only certain combinations of variable values ​​allow conditional comparisons to be true.

In order to  find the inverse of Janine's equation, we will to solve for r in terms of t.

First, we can rearrange the equation to get

⇒ t - 120 = 1/r.

divide both sides of the equation by 1/r to get

⇒ t/r - 120/r = 1.

divide both sides of the equation by -120/r to get

⇒ r = -120/(t - 120).

Therefore, the inverse of Janine's equation is r = -120/(t - 120).

Learn more about Equation:

https://brainly.com/question/29538993

#SPJ4

Answer:

The sequence is defined as follows:

a1 = 5

an = an-1 - 5, for n > 1

Using this definition, we can find the first four terms of the sequence as follows:

a1 = 5

a2 = a1 - 5 = 5 - 5 = 0

a3 = a2 - 5 = 0 - 5 = -5

a4 = a3 - 5 = -5 - 5 = -10

Therefore, the first four terms of the sequence are: 5, 0, -5, -10.

The probability that x is less than 2 is approximately 0.4866. The probability that x is greater than 3 is approximately 0.3528. The probability that x is less than 5 is approximately 0.6321. The probability that x is between 2 and 5 is approximately 0.1455.

The given probability density function is an exponential distribution with a rate parameter of λ = 1/3. The formula for P(x < x_0) is the cumulative distribution function (CDF) of the exponential distribution, which is given by:

F(x_0) = ∫[0,x_0] f(x) dx = ∫[0,x_0] 1/3 * 4 * e^(-x/3) dx

a. Write the formula for P(x < x_0):

Using integration, we can solve this formula as follows:

F(x_0) = [-4e^(-x/3)] / 3 |[0,x_0]

= [-4e^(-x_0/3) + 4]/3

b. Find P(x < 2):

To find P(x < 2), we simply substitute x_0 = 2 in the above formula:

F(2) = [-4e^(-2/3) + 4]/3

≈ 0.4866

Therefore, the probability that x is less than 2 is approximately 0.4866.

c. Find P(x > 3):

To find P(x > 3), we can use the complement rule and subtract P(x < 3) from 1:

P(x > 3) = 1 - P(x < 3) = 1 - F(3)

= 1 - [-4e^(-1) + 4]/3

≈ 0.3528

Therefore, the probability that x is greater than 3 is approximately 0.3528.

d. Find P(x < 5):

To find P(x < 5), we simply substitute x_0 = 5 in the above formula:

F(5) = [-4e^(-5/3) + 4]/3

≈ 0.6321

Therefore, the probability that x is less than 5 is approximately 0.6321.

e. Find P(2 < x < 5):

To find P(2 < x < 5), we can use the CDF formula to find P(x < 5) and P(x < 2), and then subtract the latter from the former:

P(2 < x < 5) = P(x < 5) - P(x < 2)

= F(5) - F(2)

= [-4e^(-5/3) + 4]/3 - [-4e^(-2/3) + 4]/3

≈ 0.1455

Therefore, the probability that x is between 2 and 5 is approximately 0.1455.

To learn more about probability

https://brainly.com/question/30034780

#SPJ4

Answer:

a. 6

b. 6

Step-by-step explanation:

A. mean proportion

3:x::x:12

product of mean = product of extreme

3 x 12 = x^2

x^2= 36

now take square root on both sides

x = 6

as sqaure root will cancel the square on x and square root of 36 is 6.

B. the geometric mean is the product of all

the numbers in a set, with the root of how many numbers there are. here, there are two numbers, so a square root is used. the value of the geometric mean of 3 and 12 is 6.

Hope's it helps...

Answer:

487

or

4870

Step-by-step explanation:

(I might not have done it right)

is it 24,354 / 5 or 2,435 / 5?

Because I got 487

But to check an answer you must multiply

When I multiplied 5 x 487 the answer is 2,435

But 5 x 4870 is 24,350

It has to be one of these

B) Quick Sort is algorithms sorts data by recursively splitting the array into smaller sub-arrays, until eventually reaching single-element sections, and then joins the sub-arrays back together in sorted order

Merge Sort is an effective algorithm for sorting the data items of a list or an array. This algorithm's fundamental idea is to break the unsorted list into many sub-lists until every sub-list contains only one item.

The merging procedure then recombines all of the sublists, resulting in a sorted list. Divide-and-conquer is the name given to this merging process. Merge Sort divides the original list into N sublists, each of which contains one element.

The Merge Sort algorithm is faster than other sorting algorithms when it comes to time complexity. The time complexity of Merge Sort is O (n log n), which is better than Bubble Sort and Insertion Sort.

It is a more efficient sorting algorithm than other algorithms, such as bubble sort, which has a higher time complexity of O (n²).

Therefore, we can say that Merge Sort is the most efficient algorithm to sort an array in ascending or descending order.

Learn more about Merge Sort Algorithm at

https://brainly.com/question/13152286

#SPJ11

A theorem which these transformations reveal include the following: theorem of intersecting secants.

In Mathematics and Geometry, the theorem of intersecting secants states that when two lines intersect outside a given circle, the measure of the angle formed by these intersecting lines is equal to one-half (½) of the difference of the two (2) arcs it intercepts.

By applying the theorem of intersecting secants, the value of any of the angle subtended by the intersecting lines can be calculated by using the following mathematical equation:

m∠a = One-half(y – x).

m∠a = ½(y – x).

Where:

x and y represent the angles formed by the intersecting lines.

Therefore, the theorem of intersecting secants describe these set of transformations.

Read more on intersecting secants here: https://brainly.com/question/31049910

#SPJ1

In order to determine the rate at which the searchlight is rotating when the man is 15 ft from the point on the path closest to the searchlight, the following steps should be performed in this order

Learn more about Equation

brainly.com/question/24169758

#SPJ11

Answer:

x = -13/7, y = 54/7

Step-by-step explanation:

- Set equations equal to each other

[tex]5x + 17 = -2x +4[/tex]

Add 2x to both sides

[tex]7x +17 = 4[/tex]

Subtract 17 from both sides

[tex]7x = -13[/tex]

divide both sides by 7

[tex]x = -13/7[/tex]

Then substitute x into one of the equations. I picked the first one.

[tex]y = 5 (-13/7) + 17[/tex]

I multiplied 5 by -13 to get -65/7. Then I turned 17 into sevenths: 17 x 7 = 119, so that's 119/7. 119 + -65 = 54, so 54/7 for y.

Let me know if this helped by hitting thanks or brainliest. If not, please comment and I'll get back to you ASAP!

Use the line segment that connects (3, 42.5) and (5, 44) to estimate the vine length after 4 days.

Given the table of values

To do this, we make use of linear interpolation

Such that the points closest to day 4 are (3, 42.5) and (5, 44)

The slope of the line passing through the two points can be found using the formula:

m = (y2 - y1) / (x2 - x1)

where (x1, y1) = (3, 42.5) and (x2, y2) = (5, 44).

Thus, we have:

m = (44 - 42.5) / (5 - 3) = 0.75

So, we have

y = 0.75x + b

Using the point (3, 42.5), we get:

42.5 = 0.75(3) + b

Solving for b, we get:

b = 42.5 - 0.75(3)

b = 40.25

So, the equation is

y = 0.75x + 40.25

To estimate the vine length after 4 days, we substitute x = 4 into the equation and solve for y:

y = 0.75 * 4 + 40.25

y = 43.25

Therefore, the vine length after 4 days is estimated to be about 43.25 units.

Read more about linear regression at

https://brainly.com/question/10209928

#SPJ1

The simplified form of the combination is (3n² - 5n + 3)/3

Now let's return to the problem at hand. We have the expression ⁿ⁺¹C₃ − ⁿ⁻¹C₃, which involves two combinations with slightly different values of n. To simplify this expression, we need to first expand each combination using the formula we just discussed.

Starting with ⁿ⁺¹C₃, we have:

ⁿ⁺¹C₃ = (n + 1)!/(3!(n - (3 + 1))!)

We can simplify this further by noting that (n - 4)! is the same as (n - 3 - 1)! and pulling out the common factors:

(n + 1)!/(3!(n - 4)!) = (n + 1)(n)(n - 1)/(3 x 2 x 1)

Next, let's expand ⁿ⁻¹C₃:

ⁿ⁻¹C₃ = (n - 1)!/(3!(n - (3 - 1))!)

Again, we can simplify by noting that (n - 2)! is the same as (n - 1 - 1)!:

(n - 1)!/(3!(n - 2)!) = (n - 1)(n - 2)(n - 3)/(3 x 2 x 1)

Now we can substitute these expressions back into the original equation:

ⁿ⁺¹C₃ − ⁿ⁻¹C₃ = (n + 1)(n)(n - 1)/(3 x 2 x 1) - (n - 1)(n - 2)(n - 3)/(3 x 2 x 1)

We can simplify this by finding a common denominator and combining like terms:

[(n + 1)(n)(n - 1) - (n - 1)(n - 2)(n - 3)]/(3 x 2 x 1)

Simplifying further, we can expand the terms:

[(n³ - n) - (n³ - 7n² + 11n - 6)]/(6)

Which gives us:

(6n² - 10n + 6)/6

We can simplify this by factoring out a 2 from each term in the numerator and denominator:

2(3n² - 5n + 3)/2(3)

And finally, we can cancel out the 2s to get:

(3n² - 5n + 3)/3

To know more about combination here

https://brainly.com/question/28998705

#SPJ4

Complete Question:

Simplify:  

ⁿ⁺¹C₃ − ⁿ⁻¹C₃

Therefore, the volume of the solid obtained by rotating the region bounded by the curves y = x^2, y = 0, x = 0, and x = 1 about the line x = 2 is (5/6)π cubic units.

To find the volume of the solid obtained by rotating the region bounded by the given curves about the specified line, we use the method of cylindrical shells. The formula for the volume of a cylindrical shell is given as,
Volume = 2πrh * Δx

Where, r is the distance of the shell from the axis of rotation, h is the height of the shell, and Δx is the thickness of the shell. The factor 2π accounts for the entire circumference of the shell.
Example problem: Find the volume of the solid generated by rotating the region bounded by the curves y = x^2, y = 0, x = 0, and x = 1 about the line x = 2.
Solution:
Step 1: Draw the graph of the region to be rotated
Step 2: Identify the shell radius and height
For a shell at position x, the radius is given by r = 2 - x (the distance of the line x = 2 from the axis of rotation)
The height of the shell is given by h = x^2 (the difference between the top and bottom curves)
Step 3: Write the volume formula
Volume = 2πrh * Δx
Step 4: Integrate to find the total volume
The limits of integration are from 0 to 1 since the curves intersect at (0,0) and (1,1).
[tex]∫ 2π(2 - x)(x^2) dx from 0 to 1[/tex]
= [tex]2π [∫ 2x^2 - x^3 dx from 0 to 1][/tex]
= [tex]2π [(2/3) - (1/4)][/tex]
= 2π [5/12][tex]2π [5/12][/tex]
= (5/6)π cubic units
for such more questions on  integration

https://brainly.com/question/22008756

#SPJ11

Answer:

see explanation

Step-by-step explanation:

(a)

the scale factor is the ratio of corresponding sides, shape B to shape A

scale factor = [tex]\frac{12}{15}[/tex] = [tex]\frac{4}{5}[/tex]

(b)

t is then [tex]\frac{4}{5}[/tex] of 7 = [tex]\frac{4}{5}[/tex] × 7 = [tex]\frac{28}{5}[/tex]

Answer:

-----------------------------------

The y-intercept is the point where the line crosses the y-axis, which occurs when x = 0.

To find the y-intercept, substitute 0 for x in the equation y = 4x + 2:

The y-intercept is 2 and matching choice is C.

Answer:

2

Step-by-step explanation:

We need to find out the y intercept of the given equation which is y = 4x + 2 .

y intercept is a point where the graph of the equation cuts the y axis. So at y intercept x coordinate will be 0 , so plug in x = 0 , in the given equation as ;

y = 4x + 2

y = 4(0) + 2

y = 0 + 2

y = 2

Therefore the y intercept of the line is 2 . ( option C )

Answer:

7/10

59/100

11/20

Step-by-step explanation:

59/100=59/100

7/10=70/100

11/20=55/100

Answer:

The point z = 3+4i is plotted as a blue dot, and the two square roots are plotted as a red dot and a green dot. The magnitudes of z and its square roots are shown by the radii of the circles centered at the origin.

Step-by-step explanation:

qrt(z) = +/- sqrt(r) * [cos(theta/2) + i sin(theta/2)]

where r = |z| = magnitude of z and theta = arg(z) = argument of z.

Calculate the magnitude of z:

|r| = sqrt((3)^2 + (4)^2) = 5

And the argument of z:

theta = arctan(4/3) = 0.93 radians

Now, find the two square roots of z:

sqrt(z) = +/- sqrt(5) * [cos(0.93/2) + i sin(0.93/2)]

= +/- 1.58 * [cos(0.47) + i sin(0.47)]

= +/- 1.58 * [0.89 + i*0.46]

Using a calculator, simplify this expression to:

sqrt(z) = +/- 1.41 + i1.41 or +/- 0.2 + i2.8

The rounding of the number to 1 significant figure is-

216 × 876 = 180000

216 × 876

This number can be written in form of rounding to 1 significant figure as;

200 × 900 = 180000

To know more about the significant figure, here

https://brainly.com/question/293578

The family will use 3,600 fewer gallons of water with the new showerheads in a 30-day period.

A family of five recently replaced its 5-gallon-per-minute showerheads with water-saving 2-gallon-per-minute showerheads. Each member of the family averages 8 minutes in the shower per day. In a 30-day period, the family will use 3,600 fewer gallons of water with the new showerheads. How many fewer gallons of water will the family use with the new showerheads?

Calculate the number of gallons used per person per shower before:

5 gal/min x 8 min = 40 gallons per person per shower.

The number of gallons used per person per shower after:

2 gal/min x 8 min = 16 gallons per person per shower.

The number of gallons used per person per day before:

40 gallons x 1 shower = 40 gallons per person per day.

The number of gallons used per person per day after:

16 gallons x 1 shower = 16 gallons per person per day

The number of gallons used per family per day before:

40 gallons x 5 people = 200 gallons per day

The number of gallons used per family per day after:

16 gallons x 5 people = 80 gallons per day

The number of gallons used per month before:

40 gallons x 5 people x 30 days = 6,000 gallons per month

The number of gallons used per month after:

16 gallons x 5 people x 30 days = 2,400 gallons per month

The family will use 6,000 - 2,400 = 3,600 fewer gallons of water with the new showerheads in a 30-day period. Therefore, the answer is 3,600.

To learn more about water gallon problems refer :

https://brainly.com/question/14700882

#SPJ11

The function that satisfies the hypotheses of the Extreme Value Theorem on the given interval is given by

B. g(x)=6x^2+3 on 0≤x≤4

D. f(x) = (e^x)/x for 2 ≤ x ≤ 16.

Step 1: State the Extreme Value Theorem

The Extreme Value Theorem states that if a function is continuous on a closed interval [a,b], then the function must have a maximum and a minimum on the interval.

Step 2: Check for continuity and closed interval for each function

A. f(x) = 1/x on −10 ≤ x ≤ 10

The function f(x) = 1/x is continuous on the interval (-10, 0) and (0, 10).

However, since the interval given is [−10, 10], we see that the function is not continuous over the closed interval.

Hence the function does not satisfy the hypotheses of the Extreme Value Theorem.

B. g(x) = 6x^2+3 on 0 ≤ x ≤ 4

The function g(x) is continuous on the interval [0, 4].

Therefore, this function satisfies the hypotheses of the Extreme Value Theorem on the given interval.

C. k(x) = {3x^2+9 for 0 ≤ x < 2, 12x for 2 ≤ x ≤ 10} on 0 ≤ x ≤ 10

The function k(x) is continuous on the interval [0, 2) and (2, 10]. H

However, since the interval given is [0, 10], we see that the function is not continuous over the closed interval.

Hence the function does not satisfy the hypotheses of the Extreme Value Theorem.

D. h(x) = (e^x)/x for 2 ≤ x ≤ 16The function h(x) is continuous on the interval [2, 16].

Therefore, this function satisfies the hypotheses of the Extreme Value Theorem on the given interval.

E. m(x) = 6x^3+x+1 on −4 < x < 3

The function m(x) is continuous on the interval (-4, 3).

However, since the interval given is [-4, ∞), we see that the function is not continuous over the closed interval.

Hence the function does not satisfy the hypotheses of the Extreme Value Theorem.

Therefore, the only function that satisfies the hypotheses of the Extreme Value Theorem on the given interval is given by

B. g(x)=6x^2+3 on 0≤x≤4

D. f(x) = (e^x)/x for 2 ≤ x ≤ 16

To know more about the "Extreme Value Theorem": https://brainly.com/question/30760554

#SPJ11

Step-by-step explanation:

(a) To find the lower bound for the length of the rectangle, we need to subtract half of the smallest unit of measurement from the given measurement.

The smallest unit of measurement given is 1 mm, so half of that is 0.5 mm.

Therefore, the lower bound for the length of the rectangle is:

64 mm - 0.5 mm = 63.5 mm

(b) The perimeter of a rectangle is calculated by adding up the length of all four sides.

The lower bounds for the length and width of the rectangle are 63.5 mm and 36.5 mm, respectively.

So, the lower bound for the perimeter is:

2(63.5 mm + 36.5 mm) = 2(100 mm) = 200 mm

Answer and explanation below. Credits to Chris, Mechanical engineering college, Master's degree

Answer: 24

Step-by-step explanation:

Surface Area of a rectangular prism = 2 (lh +wh + lw ) Square units.

                                                              = 2[(2*2)+(2*2)+(2*2)]

                                                               = 2[4+4+4]

                                                                =2[12]

                                                                  24

Answer:

Cost price (CP) = Rs20

% Profit = 10%

Selling price (SP) = y

By formula:

% Profit = (Profit/CP) x 100%

But Profit= SP - CP

Therefore;

% Profit = [(SP-CP)/C.P)] x 100%

Substituting, we have:

10% = [(y-20)/20] x 100%

10/100 = (y-20)/20

1/10 = (y-20)/20

1 = (y-20)/2

Cross multiply

y - 20 = 2

y = 2 + 20

y = 22

Therefore, the Sale price is Rs 22