Consider the electron configuration 1s2 2s2 4s1 for a boron atom:
a.
this is the correct ground state configuration.
b.
this configuration is incorrect because it violates the Heisenburg uncertainty principle.
c.
this configuration is incorrect because it violates the Pauli exclusion principle.
d.
this is a valid configuration, but represents an excited state.
e.
this configuration is incorrect because it violates Hund’s rule

Answers

Answer 1

The correct answer is (d) - this is a valid configuration but represents an excited state.

The electron configuration of an atom describes how its electrons are distributed among its various energy levels or orbitals. The electron configuration given for boron, 1s2 2s2 4s1, indicates that there are two electrons in the first energy level (the 1s orbital), two in the second energy level (the 2s orbital), and one in the fourth energy level (the 4s orbital). This configuration is not the ground state configuration for boron, which is actually 1s2 2s2 2p1, but it is a valid configuration that could be achieved if the atom was excited to a higher energy state.

The Heisenberg uncertainty principle states that it is impossible to know both the position and velocity of an electron simultaneously, but this does not affect the validity of the electron configuration. The Pauli exclusion principle states that no two electrons in an atom can have the same set of quantum numbers, which is not violated by the configuration given for boron. Hund’s rule states that electrons will occupy orbitals of equal energy singly before pairing up, but this rule is not applicable to this particular configuration.

To know more about Heisenberg visit:

https://brainly.com/question/29392632

#SPJ11


Related Questions

Provide the organometallic reagent that is needed to perform the transformation shown below. The reagent should be formatted as LiR or BrMgR, where R is an alkyl group written as a Condensed Formula. Do not use subscripts.

Answers

The correct answer is   [tex]LiCH_{3}CH(CH_{3} )CH_{3}[/tex] .

Organometallic reagent

Organometallic chemistry is the study of organometallic compounds, which are substances that contain at least one chemical bond between a carbon atom from an organic molecule and a metal. These substances include alkali, alkaline earth, and transition metals, as well as metalloids like boron, silicon, and selenium. In addition to links to organyl fragments or molecules, bonds to 'inorganic' carbon, such as those to carbon monoxide (metal carbonyls), cyanide, or carbide, are also typically regarded as organometallic. Although they are not strictly speaking organometallic compounds, some similar compounds, such as transition metal hydrides and metal phosphine complexes, are frequently included in discussions of such substances. The phrase "metalorganic compound," which is comparable but different, describes molecules that contain metals but do not have direct metal-carbon bonds but do have organic ligands.

Learn more about organometallic reagent here:

https://brainly.com/question/13299409

#SPJ4

1. Determine the molecular formula of an oxide of iron in which the mass of iron and oxygen are 69.9% and 30% respectively given that the molar mass of the oxide 159.898/mol, find the empirical and molecular formula.

2. a crystalline salt when heated becomes anhydrous and loses 51.2% of its weight the anhydrous salt analysis gave the percent composition as magnesium is equal to 20.0% and sulphur is equal to 26.66% and oxygen is equal to 53.33%.

3. In three moles of Ethane calculate the following
1. calculate number of carbon atoms.
2. number of moles of hydrogen atoms
3. number of molecules of Ethane.​

Answers

1a. The empirical formula of the compound is Fe₂O₃

1b. The molecular formula of the compound is Fe₂O₃

2a. The molecular formula of the anhydrous salt is MgSO₄

2b. The formula of the crystalline salt is MgSO₄.7H₂O

3i. The number of mole of carbon atoms in the compound is 6 moles

3ii. The number of mole of hydrogen atoms in the compound is 18 moles

3iii. The number of molecules in 3 moles of ethane is 1.806×10²⁴ molecules

1a. How to determine the empirical formulaFe = 69.9%O = 30%Empirical formula =?

Divide by their molar mass

Fe = 69.9 / 56 = 1.248

O = 30 / 16 = 1.875

Divide by the smallest

Fe = 1.248 / 1.248 = 1

O = 1.875 / 1.248 = 3/2

Multiply by 2 to express in whole number

Fe = 1 × 2 = 2

O = 3/2 × 2 = 3

Thus, the empirical formula of the compound is Fe₂O₃

1b. How to determine the molecular formulaEmpirical formula = Fe₂O₃Molar mass of compound = 159.89 g/molMolecular formula = ?

Molecular formula = empirical × n = molar mass

[Fe₂O₃]n = 159.89

[(56×2) + (16×3)]n = 159.89

160n = 159.89

n = 159.89 / 160

n = 1

Molecular formula = [Fe₂O₃]n

Molecular formula = [Fe₂O₃] × 1

Molecular formula = Fe₂O₃

2a. How to determine the molecual formula of the anhydrous salt

We'll begin by calculating the empirical formula

Mg = 20.0% S = 26.66% O = 53.33%Empirical formula =?

Divide by their molar mass

Mg = 20.0 / 24 = 0.83

S = 26.66 / 32 = 0.83

O = 53.33 / 16 = 3.33

Divide by the smallest

Mg = 0.83 / 0.83 = 1

S = 0.83 / 0.83 = 1

O = 3.33 / 0.83 = 4

Thus, the empirical formula of the anhydrous salt is MgSO₄

The molecular formula of the anhydrous salt can be obtained as follow:

Empirical formula = MgSO₄Molar mass of compound = 120 g/molMolecular formula = ?

Molecular formula = empirical × n = molar mass

[MgSO₄]n = 120

[24 + 32 + (16×4)]n = 159.89

120n = 120

n = 120 / 120

n = 1

Molecular formula = [MgSO₄]n

Molecular formula = [MgSO₄] × 1

Molecular formula = MgSO₄

2b. How to determine the formula of the crystalline saltWater (H₂O) = 51.2%Anhydrous salt (MgSO₄) = 100 - 51.2 = 48.8%Formula of crystalline salt =?

Divide by their molar mass

MgSO₄ = 48.8 / 120 = 0.4

H₂O = 51.2 / 18 = 2.8

Divide by the smallest

MgSO₄ = 0.4 / 0.4 = 1

H₂O = 2.8 / 0.4 = 7

Thus, the formula of the crystalline salt is MgSO₄.7H₂O

3i. How to determine the mole of carbon atoms in 3 moles of C₂H₆

1 mole of C₂H₆ contains 2 moles of carbon atoms.

Therefore,

3 moles of C₂H₆ will contain = 3 × 2 = 6 moles of carbon atoms

3ii. How to determine the mole of hydrogen atoms in 3 moles of C₂H₆

1 mole of C₂H₆ contains 6 moles of hydrogen atoms.

Therefore,

3 moles of C₂H₆ will contain = 3 × 6 = 18 moles of hydrogen atoms

3iii. How to determine the number of molecules

From Avogadro's hypothesis,

1 mole of ethane = 6.02×10²³ molecules

Therefore,

3 moles of ethane = 3 × 6.02×10²³ molecules

3 moles of ethane = 1.806×10² molecules

Learn more about empirical formula:

https://brainly.com/question/24297883

Learn more about Avogadro's number:

https://brainly.com/question/26141731

#SPJ1

Complete question

2. A crystalline salt when heated becomes anhydrous and loses 51.2% of its weight the anhydrous salt analysis gave the percent composition as magnesium is equal to 20.0% and sulphur is equal to 26.66% and oxygen is equal to 53.33%. Ccalculate the molecular formula of the anhydrous and the crystalline salt. The molecular weight of the anhydrous salt is 120

Predict the nature of the indicated
covalent bond.
H
H
polar
H-C
H
-C-H
H
non-poiar

Answers

Answer:

Non-polar

Explanation:

Non-polar bonds occur when the electrons in a covalent bond are equally shared between the two atoms.

The indicated bond is most likely non-polar because the two atoms are identical (both carbons). In addition, these two carbons are balanced (their other bonds are identical). This means there is no reason for the electrons in the bond to be pulled in any particular direction.

Determine the mass, in grams, of 0.350 moles of s (1 mol of s has a mass of 32.07 g).

Answers

Answer:

11.22 gm

Explanation:

32.07 gm / mole * .350 mole = 11.22 gm

The mass of 0.350 moles of Sulphur is equal to 11.22 g.

What is a mole?

A mole is a standard unit which is used to calculate the huge number of quantities of atoms, molecules, ions, or other particular particles. The mass of the one mole of any element is called atomic mass and that of any compound is called molar mass.

The number of units present in one mole was found to be equal to 6.023 × 10 ²³ which is known as Avogadro’s constant or Avogadro’s number.

Given, the number of moles of sulphur = 0.350 moles

The mass of one mole of sulphur = 32.07 g

Then, the mass of 0.350 moles of Sulphur = 0.350 × 32.07

The mass of 0.350 moles of Sulphur (S) = 11.22 g

Therefore, 11.22 grams is the mass of 0.350 moles of Sulphur (S).

Learn more about the mole, here:

brainly.com/question/26416088

#SPJ2

A short chain of monomer liquid not long enough to be considered a polymer is called a(n)?

a. methacrylate
b. acrylate
c. urethane
d. oligomer

Answers

Answer:

d. oligomer it is the correct answer also if you would just search that up it pops up

Which of the following can easily form an ionic bond with a cation?
Sr
Ne
NH4+
PO43–

Answers

PO43- can form an ionic bond with a cation.

The chemical species which can easily form an ionic bond with a cation will be.

The definition of an ionic bond is a chemical bond that is formed between two ions that have opposite charges.

An Ionic bond is formed when one atom gives up one or more electrons to another atom.

These bonds can easily form between a pair of atoms or between molecules. This kind of bonding is most widely seen in bonds present in salts.

Compared to other options given,  is the best option as the total number of 32 valence electrons, is the highest among the given choices. Its tendency to form ionic bonds with the other cation is much higher as compared to others.

P has 5 electrons which combine with 4 O atoms which have 6 lone pairs and a -3 charge on it, which means it is accepting 3 electrons so it will be (+3), so total valence electrons will be 5 + 6 (4) + 3 = 32.

For detailed study about cation refer given link https://brainly.com/question/14309645.

#SPJ1.

A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc. What is the powder volume

Answers

A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc.  The powder volume is 76.25.

How do you calculate powder volume ?

To calculate the powder volume use the expression

[tex]\frac{H}{Q} = \frac{D}{X}[/tex]

where,

H = Dose on hand

Q = Quantity on hand

D = Desired dose

X = Quantity desired

Now put the values in above expression we get

[tex]\frac{H}{Q} = \frac{D}{X}[/tex]

[tex]\frac{100}{61} = \frac{125}{X}[/tex]

[tex]X = \frac{125 \times 61}{100}[/tex]

X = 76.25

Thus from the above conclusion we can say that A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc.  The powder volume is 76.25.

Learn more about the Amoxicillin here: https://brainly.com/question/28001741

#SPJ4

Blank + BaCl2 = BaSO4 + 2NaCl
How to complete this chemical reaction so that it is a Double displacement reaction

Answers

The blank is filled by Na₂SO₄, and the complete equation for the double displacement reaction is:

Na₂SO₄ + BaCl₂ = BaSO₄ + 2 NaCl

What is a double displacement reaction?

It is a reaction in which both reactants exchange anions and cations.

Let's consider the following incomplete double displacement reaction.

_____ + BaCl₂ = BaSO₄ + 2 NaCl

If we compare the left and right sides, we can see that the missing ions in the left side are Na⁺ and SO₄²⁻. Thus, the missing compound is Na₂SO₄. The complete equation is:

Na₂SO₄ + BaCl₂ = BaSO₄ + 2 NaCl

Learn more about double displacement here: https://brainly.com/question/23918356

#SPJ1

A sample of neon gas in a bulb is at 149.05 °C and 349.84 kPa. If the pressure drops
to 103.45 kPa, what is the new temperature (in °C)? Provide your answer to two
decimals.

Answers

The new temperature (in °C) of the gas, given the data is –148.20 °C

Data obtained from the question Initial temperature (T₁) = 149.05 °C = 149.05 + 273 = 422.05 KInitial pressure (P₁) = 349.84 KPa Volume = constant New pressure (P₂) = 103.45 KPaNew temperature (T₂) =?

How to determine the new temperature

The new temperature of the gas can be obtained by using the combined gas equation as illustrated below:

P₁V₁ / T₁ = P₂V₂ / T₂

Since the volume is constant, we have:

P₁ / T₁ = P₂ / T₂

349.84 / 422.05 = 103.45 / T₂

Cross multiply

349.84 × T₂ = 103.45 × 422.05

Divide both side by 349.84

T₂ = (103.45 × 422.05) / 349.84

T₂ = 124.80 K

Subtract 273 from 124.80 K to express in degree celsius

T₂ = 124.80 – 273

T₂ = –148.20 °C

Learn more about gas laws:

https://brainly.com/question/6844441

#SPJ1

The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. How many grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution

Answers

The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. 262 grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution

Define Solute

A solute is a material that dissolves in a solution. The amount of solvent present in fluid solutions is greater than the amount of solute. The two most common examples of solutions in daily life are salt and water. Salt is the solute because it dissolves in water.

forms of ratios for product concentration or yield:-w/v:- Weight by volume or weight per volume are the terms used. Any solid compound's concentration in a liquid can be calculated using it. It is measurable in gm/ml.Weight by weight ratio is referred to as w/w.It is employed to determine the final yield of the compound obtained from the starting compound. as in —mg/—gm.

       It provides the real yield of the substance or item.

Volume/volume. It is used to specify a liquid's composition or percent in a liquid compound.

using w/v we can calculate the weight of sucrose:-

40.0% means 40 g sucrose/ 100 g solution

40.0g sucrose x (655/100)=grams of sucrose

262  grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution.

Learn more about Solute here:-

https://brainly.com/question/14397121

#SPJ4

_____ in carbon dioxide in your red blood cells, which causes _____ in ph, causes your breathing to speed up.

Answers

Increase in carbon dioxide in your red blood cells, which causes a drop in pH, causes your breathing to speed up.

The presence of  carbon dioxide in red blood cell will lower the pH because  carbon dioxide combines with water to form [tex]H^{+}[/tex] and [tex]HCO_{3} ^{-}[/tex] .

About 70% of Carbon dioxide transported as bicarbonate ion in the plasma of the red blood cells .When carbon dioxide diffuses across the cell membrane of erythrocyte then it reacts with water to form carbonic acid.This carbonic acid breaks into bicarbonate ion and proton  in the presence of carbonic anhydrase . this is because it is very unstable.This hydrogen ions binds to the hemoglobin and which results in initiation of bohr effect .So, as concentration of hydrogen ions increases pH of the blood decreases.

learn about carbonic acid

https://brainly.com/question/13929437

#SPJ4

Given the balanced equation: 2KClO3 --> 2KCl 3O2 What type of reaction is represented by this equation

Answers

The correct option is (2) decomposition.

In the balanced equation 2KClO3==> 2KCl + 3O2, as there is a reduction of oxygen therefore it is decomposition reaction.

What is decomposition reaction?

A chemical reaction that results in the breakdown of one reactant into two or more reactants is known as a decomposition reaction.

The general equation for decomposition is-

AB -> A + B

Where A & B are now the product molecules and AB is the parent (reactant) molecule.

Some key features of the decomposition reaction are-

A combination reaction is the opposite of the a decomposition reaction. In such reactions, a single product is created form two or even more reactants.Decomposition processes are not always endothermic. Both endothermic and exothermic reactions can take place during decomposition. This one is more typical than the former, though.Extraction of metal from their ores is a significant use of decomposition processes. For instance, by putting calamine through a breakdown reaction, zinc can be extracted. The same process can be used to make sodium form sodium chloride (NaCl).A type of decomposition reaction known to be a double decomposition reaction involves the exchange of positive and negative ions between two constituent reactants to create two new molecules.

To know more about decomposition reaction, here

https://brainly.com/question/21491586

#SPJ4

The complete question is-

Given the balanced equation:

2KClO3==> 2KCl + 3O2

Which type of reaction is represented by this equation?

(1) synthesis

(2) decomposition

(3) single replacement

(4) double replacement

PLEASE I NEED HELP ASAP!!!!

1.)Alex reacts 40.0 grams of substance X with 850 mL of 1.0 mol/L solution of hydrochloric acid. What is the maximum mass of carbon dioxide gas that could be obtained from this reaction?


2.)Jess reacts 25.0 grams of substance X with 40.0 mL of 2.0 mol/L of sodium hydroxide solution. The reaction yielded 2.5 grams of calcium hydroxide. Calculate the theoretical yield of calcium hydroxide and %Yield for the reaction.

Answers

The percent yield of the calcium hydroxide is 84.5%.

What is stoichiometry?

Stoichiometry enables us to obtain the mass of a substance form the equation of the reaction.

The equation of the reaction is;

CaCO3 + 2HCl -----> CaCl2 + CO2 + H2O

Number of moles of X = 40.0 grams/100 g/mol = 0.4 moles

Number of moles of HCl = 850/1000 * 1 M = 0.85 moles

If 1 mole of CaCO3 reacts with 2 moles of HCl

0.4 moles of  CaCO3 reacts with  0.4 moles  * 2 moles/1 mole

= 0.8 moles of HCl

Hence X is the limiting reactant.

The reaction is 1:1 then the amount of CO2  produced is 0.4 moles

Mass of CO2 = 0.4 CO2 * 44 g/mol = 17.6 g

2) The reaction equation is; 2NaOH + CaCO3 --->  Ca(OH)2 + Na2CO3

Number of moles of X = 25.0 grams/100 g/mol =  0.25 moles

Number of moles of NaOH= 40/1000 L * 2 M = 0.08 moles

If 1 mole of X reacts with 2 moles of NaOH

0.25 moles  reacts with   0.25 moles   * 2 moles /1 mole

= 0.5 moles

NaOH is the limiting reactant

2 moles of NaOH produces 1 mole of CO2

0.08 moles of NaOH produces 0.08 moles * 1 mole/2 moles

= 0.04 moles of CO2

Theoretical yield of CO2 =  0.04 moles of CO2 * 74 g/mol = 2.96  g

Percent yield = 2.5 g/ 2.96  g * 100

= 84.5%

Learn ore about percent yield:https://brainly.com/question/17042787

#SPJ1

Which solution could be used to precipitate the calcium ion form a water sample?

Answers

Calcium carbonate ([tex]CaCO_{3}[/tex]), an insoluble precipitate that could be removed from water by filtration, is created when the calcium ion in hard water bonds with the carbonate ion.

Precipitates may be ionic solids that are insoluble and result from reactions between certain cations as well as anions in water. A precipitate's formation could be influenced by a variety of circumstances.

When calcium atoms gain or lose electrons, they change their charge but also reactivity, forming calcium ions.

Therefore, Calcium carbonate ([tex]CaCO_{3}[/tex]), could be used to precipitate the calcium ion form a water sample

To know more about calcium ion and precipitate

https://brainly.com/question/18109776

#SPJ4

Which compound has the lowest melting point?

CaCl2


K2Cr2O7

C6H12O6

K2O

Answers

Answer:

[tex]K2O[/tex]

Explanation:

If you use a melting point periodic table there is a listing of all the elements and their melting point.

Potassium (K) has a melting point of 63.25 degrees Celsius and oxygen (O) has a melting point of -218 degrees Celsius. Therefore, if you add those two values up

[tex](63.25x2)+-218 = -91.5 Degrees Celsius[/tex]

All the other compounds do not reach negatives.

Two-thirds of a bone's weight is composed of calcium phosphate which interacts with calcium hydroxide to form crystals of __________.

Answers

Two-thirds of a bone's weight is composed of calcium phosphate which interacts with calcium hydroxide to form crystals of hydroxyapatite

The two component of bones are 33% organic matter and 67% inorganic matter( Calcium phosphate and  hydroxyapatite crystal).Calcium phosphate make up almost 2/3 of the bone's weight.Collagen fibers make up almost 1/3 of the bone's weight.The calcium phosphate interacts with calcium hydroxide to form crystals of hydroxyapatite, whose molecular formula is [tex]Ca_{10} (PO_{4} )_{6} (OH)_{2}[/tex]

learn about  calcium phosphate

https://brainly.com/question/11082654

#SPJ4

Draw the major 1,2- and 1,4-addition products that form as a result of the following reaction between one equivalent each of 2,4-hexadiene and HBr.

Answers

The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.

What is Markovnikov Rule ?

Markovnikov rule explains that in addition reaction of alkene react with a hydrogen halide. The hydrogen atom is attached to the carbon atom that is already bonded to the greatest number of hydrogen.

What is Addition Reaction ?

An addition reaction is an organic reaction occur when two or more molecules combine to form a larger molecule without the loss of any atoms present in reactant.

Thus from the above conclusion we can say that The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.

Learn more about the Markovnikov Rule here: https://brainly.com/question/21496002

#SPJ1

HELP PLEASE!!!!!


2. To test for the presence of substance X, a lab assistant,
Alex, treats a sample of the material with hydrochloric acid.
Bubbles of carbon dioxide gas are observed and collected
during the test reaction. Write a balanced chemical equation
for the reaction.

3. Another lab assistant, Jess, disagrees with Alex, and treats
a sample of substance X with sodium hydroxide. One of the
products of this reaction is a compound called milk of lime
(found to be only slightly soluble in water). Write a balanced
chemical equation and identify the type of reaction taking
place.

4. Which lab assistant is performing a valid test for substance
X? Explain your answer, including a prediction of what would
be observed during a positive test. HINT: Research what is the
valid test for substance X. At this point you should know the
identity of substance X (you found it in Question #1).
62%

Answers

(2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

(2.) To test for the presence of substance X, a lab assistant, Alex, treats a sample of the material with hydrochloric acid. Bubbles of carbon dioxide gas are observed and collected during the test reaction.

The balanced chemical equation is

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

(3.) Another lab assistant, Jess, disagrees with Alex, and treats a sample of substance X with sodium hydroxide. One of the products of this reaction is a compound called milk of lime (found to be only slightly soluble in water).

The balanced chemical equation is

CaCO₃ + 2NaOH Ca(OH)₂ + Na₂CO₃

The type of reaction is Double displacement reaction

(4.) The lab assistant Alex perform the valid test for substance X because it gives effervescence of bubbles. The substance X is calcium carbonate. When calcium carbonate react with dilute HCl then carbon dioxide gas bubbles is present in it.

Thus from the above conclusion we can say that  (2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.

Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427

#SPJ1

How many sucrose molecules are in 3.0 moles of sucrose?

Answers

Answer: No of molecule of sucrose = 1.806 X 10^24

Explanation:

No. of molecules = No. of moles X NA

No. of molecule of sucrose = 3 moles X 6.02 X 10^23

No of molecule of sucrose =18.06 X 10^23

No of molecule of sucrose =1.806 X 10^24

Answer:

1.80 × 10²⁴ Molecules of Sucrose

please help me with this question

Answers

From the calculation, the concentration in parts per billion is 6 ppb.

What is ppb?

The term ppb refers to the concentration of a substance in parts per billion. We obtain the ppb using the formula;

Mass of solute/ Mass of solution * 10^9

Now, 1L = 1000cm^3 = 1000 g

The concertation in ppb = 6 * 10^-6 g/1000 g * 10^9

= 6 ppb

Learn more about parts per billion:https://brainly.com/question/9179966

#SPJ1

The protein--iron compound that has the bonding capabilities for the transport of oxygen and carbon dioxide is:

Answers

It is hemoglobin.

What is hemoglobin and its composition?

In the red blood cells (erythrocytes) of vertebrates, hemoglobin, an iron-containing protein, transports oxygen from the lungs to the body's tissues and organs and returns carbon dioxide to the lungs. In a complete blood cell (CBC) test, the amount of hemoglobin in the blood is often measured.

A globin group is surrounded by four heme groups, which together form a tetrahedral shape in each hemoglobin molecule. Heme is an organic complex known as a porphyrin that has an iron atom linked to it. Heme makes up only 4% of the weight of the molecule. As the blood circulates between the lungs and the tissues, the iron atom is what holds oxygen in place. Each hemoglobin molecule contains four iron atoms, and as a result, it has the capacity to bind four oxygen molecules. Two linked pairs of polypeptide chains make up globin.

Learn more about hemoglobin here:

https://brainly.com/question/12681891

#SPJ4

please help me with this question, and if u can do it on paper

Answers

1. O2 is the limiting reagent

2. Excess NH3 = 0.102 moles

3. 0.088 mol of NO is formed

4. 2.376 grams of H2O is formed

Stoichiometric problem

From the equation: [tex]4NH_3 + 5O_2 --- > 4NO + 6H_2O[/tex]

Mole ratio of NH3 and O2 = 4:5

Mole of 3.25 g NH3 = 3.25/17 = 0.19 mol

Mole of 3.50 g O2 = 3.5/32 = 0.11 mol

Equivalent mole of O2 from NH3 = 5/4 x 0.19 = 0.24 mol

Equivalent mole of NH3 from O2 = 4/5 x 0.11 = 0.088 mol

Thus, O2 is the limiting reagent.

Excess NH3 = 0.19 - 0.088 = 0.102 moles

Mole ratio of O2 and NO = 5:4

Equivalent mole of NO = 4/5 x 0.11 = 0.088 mol

Mole ratio of O2 and H2O = 5:6

Equivalent mole of H2O = 6/5 x 0.11 = 0.132 mol

Mass of 0.132 mol H2O = 0.132 x 18 = 2.376 grams

More on stoichiometric problems can be found here: https://brainly.com/question/15047541

#SPJ1

Relative humidity is described as: Group of answer choices a basically unused concept when it comes to weather topics. the amount of water vapor in the air at a given temperature expressed as a percentage of the water vapor capacity of the air. the amount of water vapor in the air compared to the normal amount. the amount of moisture in the air relative to your own sensible feelings.

Answers

Correct answer:

The relative humidity is best described as the amount of water vapor in the air at a given temperature expressed as a percentage of the water vapor capacity of the air.

What is relative humidity?

The ratio of the current absolute humidity to the highest absolute humidity is known as relative humidity (which depends on the current air temperature).

Water vapor is also measured by relative humidity, which is stated as a percentage but RELATIVE to the air's temperature. In other words, it is a comparison between the amount of water vapor that is actually present in the air and the maximum amount of vapor that is possible for the air at the current temperature.

With the same quantity of absolute/specific humidity, air will have a HIGHER relative humidity if it is cooler and a LOWER relative humidity if it is warmer because warm air may contain more water vapor (moisture) than cold air. The actual amount of moisture (absolute humidity) in the air is what we "feel" outside.

Learn more about relative humidity here,

https://brainly.com/question/14104185

#SPJ4

What is the purpose of a signal phrase?

6.01 formation of the solar system

Answers

Answer: The purpose is to analyze the speed of planets around a central star.

Explanation: using variables

For a phase change, H = 2 kJ/mol and S = 0.017 kJ/(K-mol). What are
G and the spontaneity of the phase change at 500 K?
A. G=-6.5 kJ; nonspontaneous
B. G= 10.5 kJ; spontaneous
C. G= 10.5 kJ; nonspontaneous
D. G=-6.5 kJ; spontaneous

Answers

The reaction has a change in free energy of -6.5 kJ and is spontaneous Option D.

What is a spontaneous reaction?

The term spontaneous reaction refers to a reaction that occurs with n external input of energy. We know that a spontaneous reaction is one in which the value of the change in free energy is negative. If the change in the free energy is positive then the reaction is nonspontaneous.

If the value of the change in free energy is zero then it follows that the reaction has attained equilibrium.

Now;

ΔG = ΔH - TΔS

ΔH = 2 kJ/mol

T =  500 K

ΔS =  0.017 kJ/(K-mol)

When we substitute values;

ΔG = 2 kJ/mol - (500 K * 0.017 kJ/(K-mol))

ΔG = -6.5 kJ

It the follows that the reaction has a change in free energy of -6.5 kJ and is spontaneous Option D.

Learn more about spontaneous reaction:https://brainly.com/question/13790391

#SPJ1

Draw an atomic structure of Sodium (Na). What are sub-atomic particles?​

Answers

Sodium represents by the (Na).

which of the following pairs would have a larger size? explain your answer.
K or K^(+)
Br or Br^(-)

Answers

Answer:

k ion is the largest size of the radius it is always smaller compared to the parent ion

Explanation:

N analyst prepared a sucrose solution by weighing 1kg of water and add 1.5kg sucrose.estimate the concentration of the resultant solution in (i) mass percent (ii) degree brix

Answers

The concentration of the solution in mass percent is 60%.

What is the mass percent?

The concentration of a substance can be expressed in mass percent. This refers to the percentage of the solute that is contained in the solution.

Thus we can write;

Mass percent = Mass of solute/ Mass of solution * 100/1

Mass percent = 1.5kg/1.5kg + 1 Kg * 100/1

Mass percent =  60%

Hence, the concentration of the solution in mass percent is 60%.

Learn more about mass percent:https://brainly.com/question/5394922

#SPJ1

At the stoichiometric (equivalence) point in a titration of benzoic acid with naoh(aq) shown by equation 3, the ph is:_______

Answers

Benzoic acid is one of the weakest acid for titration. The pH of the salt solution generated is the pH greater than 7( >7 ) at the equivalence point in any titration.

The benzoate anion, combines with water to create OH- and undissociated benzoic acid. This reaction is stronger than OH-. As a result of the hydroxide ions generated by this reaction, the final solution has a pH greater than 7. Hydrolysis is the term for an ion's reaction with water, such as the benzoate ion.

What is titration?A titration is a method for figuring out the concentration of an unknown solution by using a solution with known concentration.Until the reaction is finished, the titrant (the known solution) is typically added from a buret to a known volume of the analyte (the unknown solution).The concentration of the unknown can be determined by knowing the amount of titrant that was added. An indicator is frequently used to indicate the reaction's endpoint or end of the reaction.

Know more about titration numerical https://brainly.com/question/14501686

#SPJ4

The main acid in the stomach is hydrochloric acid (HCl). Which chemical equations show a reaction that occurs when someone takes an antacid

Answers

Answer:

Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)

Explanation:

The reaction that occurs in the stomach when one takes an antacid {Mg(OH)2} is termed as Neutralization reaction as it reacts with hydrochloric acid to form magnesium hydroxide and water.

The equation of reaction:

Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)

Other Questions
Consider two random variables, X and Y, which each take on values of either 0 or 1. Their joint probability distribution is: P(X=0, Y=0)=0.2P(X=0, Y=1)=???P(X=1, Y=0)=???P(X=1, Y=1)=0.1where P(X=0, Y=1) and P(X=1, Y=0) are unknown. Suppose, however, that you knew the following conditional probability:P(X=1 | Y=0)=0.2Based on the information provided, what is the value of P(X=0, Y=1)?Group of answer choicesA. 0.65B. 0.2C. 0.1D. Cannot compute with information provided Can the least squares line be used to predict the yield for a ph of 5.5? if so, predict the yield. if not, explain why not. a parent and a toddler meet someone who makes the parent nervous. if the toddler observes the parent's face, she will probably _____. According to Calorie King Website, here is a fragment of the Nutrition Facts label for one serving of Olive Garden's chocolate milkshake. Just to clarify the picture: it states that the energy content of this "health" food is 520 Cal per serving.) If all the energy contained in this dessert is used, how much water (in kilograms) can be brought from 30 C to the boiling point. Neglect heat loses to the environment. (Note: water is only brought to the boiling point so that it barely starts boiling; it does NOT boil away fully or even partially.) evaluate the integral. 3 x2 2 (x22x 2)2 dx refers to removing an organization from a firm's distribution channel. a. repudiation b. annulment c. disbarment d. disintermediation e. revocation the hybridization of the nitrogen atom in the cation nh2 is: sp2 the stepwise process used by scientists to generate sound research findings is consider the following. c: line segment from (0, 0) to (4, 8) (a) find a parametrization of the path c. r(t) = 0 t 4 (b) evaluate x2 y2 ds c . your company has money to invest in an employee benefit plan and you have been chosen to be the plan's trustee. as an employee you want to maximize the interest earned on this investment and have found an account that pays 8% compounded continuously. your company is providing you with $1,500 per month to put into your account for 10 years. what will be the balance in this account at the end of the 10-year period? select the closest value. An equation is given. (Enter your answers as a comma-separated list. Let k be any integer. Round terms to three decimal places where appropriate. If there is no solution, enter NO SOLUTION.) 2 sin(3) + 1 = 0 (a) Find all solutions of the equation. = (b) Find the solutions in the interval [0, 2). = A family drove 592 miles during their trip this summer. In the winter they drove 376 miles during their trip . How many more miles did the family drive over the summer than over the winter . Explain ! Compute the elastic moduli for the following polymers, whose stress-strain behaviors can be observed in the Tensile Tests module of Virtual Materials Science and Engineering (VMSE) (which may be accessed through all digital versions of this text): VMSE: Tensile Tests (a) high-density polyethylene (b) nylon (c) phenol-formaldehyde (Bakelite). How do these values compare with those presented in Table 15.1 for the same polymers? If your hands are wet and no towel is handy, you can remove some of the excesses of water by shaking them. Why does this get rid of it? Which of the following elements of PDCA matches up with the statement "You implement your corrective action to solve the problem? O A Plan Tim O B. Do 11 O C. Check O D. Act The drama club is selling tickets to their play to raise money for the show's expenses. Each student ticket sells for $7. 50 and each adult ticket sells for $10. The auditorium can hold no more than 108 people. The drama club must make at least $920 from ticket sales to cover the show's costs. If 37 adult tickets were sold, determine all possible values for the number of student tickets that the drama club must sell in order to meet the show's expenses true/false. the presence of __________ will make an executory bilateral contract fully enforceable from the moment of formation. which of the following is an essential component of an effective, quality physical education program? Compare the characteristics of the structures involved in gaseous exchange in humans and in flowering plants. you must state the name of each of the structures. Va rog!! Cineva rapid