Consider the truss shown in the diagram. The applied forces are P1=650 N
and P2=350 N
and the distance is d=2.25 m
.
Part B - The Forces in the Members at Joint C
What are the forces in the two members CB
and CD
?
Express your answers in newtons to three significant figures. Enter negative value in the case of compression and positive value in the case of tension. Enter your answers separated by a comma.

Activate to select the appropriates symbol from the following choices. Operate up and down arrow for selection and press enter to choose the input value type

FCB
, FCD
=

According to the question, The bridge girder's angle of rotation at theta 0 = 60° is 0.18 rad/s.

Velocity is the direction at which an item is moving and serves as a measure of the rate at which its location is changing as seen from a certain point of view and as measured by a particular unit of time (for example, 60 km/h northbound). In kinematics, the field of classical mechanics that deals with the motion of objects, velocity is a basic idea. A physical vector quantity called velocity . It must have both a magnitude and a direction in order to be defined. Speed is the scalar absolute value (magnitude) of velocity; it is a coherent derived unit which quantity is measured in m/s (m/s or m/s1) in the SI (metric system).

To know more velocity visit :

brainly.com/question/18084516

#SPJ4

The acceleration of block A is 8.4949 and block B is 4.2475 ft/s² while the tension is the cable is 121.168 lb.

When there are two forces acting on the ends of a cable, rope, wire, or string, it is said to be under tension. The cable has a one-direction pull along its entire length, pulling equally in both directions on objects at either end.

Tension can also be used to describe the forces that are acting on both ends of the two elements. In other words, tension's polar opposite is compression.

Physical objects must exert some force on one another in order to make contact with one another. Depending on the kind of object, each of these contact forces will be unique.

Take a section about the rope near block B and using the show datum

SB + (SB - SA) = l

2SB  - SA = l

2SB  - SA = 0

2aB - aA = 0

aA = 2aB

Take FBD of block-A

(Upward+) ∑Fₓ = mAaA

T - W[tex]_A[/tex]sin20° = mAaA

T - 200sin20° = (W[tex]_A[/tex]/g)(2aB)

T = 200sin20° + (W[tex]_A[/tex]/g)(2aB)

Take FBD of block-B;

(Downward+) ∑Fₓ = mBaB

W[tex]_B[/tex]cos20° - 2T = mAaA

300cos20° - 2(200sin20° + (W[tex]_A[/tex]/g)(2aB)) = (W[tex]_B[/tex]/g)(a[tex]_B[/tex])

300cos20° - 2(200sin20° + (200/32.2)(2aB)) = (300/32.2)(a[tex]_B[/tex])

a[tex]_B[/tex] = 4.2475 ft/s²

Acceleration of A is given as;

⇒ aA = 2aB

⇒ aA = 8.4949 ft/s²

Tension is given as;

T = 200sin20° + (200/32.2)(2(4.2475))

T = 121.168 lb

Thus, the acceleration of block A is 8.4949 and block B is 4.2475 ft/s² while the tension is the cable is 121.168 lb.

Learn more about tension

https://brainly.com/question/11348644

#SPJ4

Answer:C

Explanation:

An rise in temperature and internal energy often happens when a system is subjected to mechanical action.

It is impossible to directly quantify the internal energy of systems that are more complicated than a perfect gas. The system's internal energy is still inversely related to its temperature, though. Therefore, by keeping an eye on how the system's temperature varies, we can track changes in the system's internal energy. We may infer that the system's internal energy has grown whenever the system's temperature rises.

For the time being, let's assume that a thermometer set in a beaker of water on a hot plate registers 73.5°C, as indicated in the diagram below. Only the system's condition at that precise instant may be described by this measurement.

Learn more about Temperature here:

https://brainly.com/question/16494521

#SPJ4

A pressure of 139.7 psia is equal to 125 psig. The pressure measured by a gauge, PSI Gauge, is equal to PSI Absolute + 1 atmosphere pressure. Assume that the atmosphere has a standard atmospheric pressure of 14.7 PSI at sea level.

PSIA, or pounds per square inch absolute, stands for. As opposed to zero or the absolute vacuum, absolute pressure is pressure. On engineering documents or P&IDs, PSIA may be used. PSIG Defined: The term "PSIG" refers to pounds per square inch gauge.

The word PSIA refers to the absolute pressure in PSI, which includes the atmospheric pressure. Another name for absolute pressure is "total pressure.

To know more about PSI Gauge visit :-

https://brainly.com/question/13130097

#SPJ1

Note that the Bernoulli equation cannot be applied when the flow is "Rotational" (Option 1)

Bernoulli's equation formula represents a relationship between a fluid's pressure, kinetic energy, and gravitational potential energy in a container.

The Bernoulli equation assumes that the fluid flow is irrotational, meaning there is no net fluid flow around a closed loop. Rotational flow, also known as turbulent flow, is characterized by eddies and vortices and cannot be described using the Bernoulli equation.

Learn more about the Bernoulli equation:
https://brainly.com/question/6047214
#SPJ1

Answer:

ur hhbkiegtbckdj you and your family a very merry merry

Vo and Io in the circuit is v^0=32V And I^0=0.8 A

Step by step explanation:

Given circuit:
Resultant equivalent resistance is                                        
R^ e q=(700||30)+(20||5)
=21+4
R^ e q=25
Total current=v/R^ e q
I=200/25
I=8A

Therefore ,Apply nodal analysis at v^ 1
v^ 0=v^1
200-V0/70+ 200-v^ 0/30=8
6000-30v^0+14000-70v^0/2100=8
20000-100v^0/2100=8
=20000-100v^0=16800
=100v^0=3200
v^0=3200/100
v^0=32V            

Apply nodal at V^ 2.
I^0=V^0-200/30+v^0/5
I^0=32-200/30+32/5
I^0=-168/30+32/5
I^0=-5.6+6.4
I^0=0.8 A


What Does Equivalent Resistance Mean?

An equivalent resistance is defined in physics as the sum of the resistances of the resistors connected in a circuit. Resistors can be wired in series or parallel. Assume that the three resistors are R1, R2, and R3.

If you connect these three resistors in series, the equivalent resistance is given by

Re = R1 + R2 + R3        

To learn more about Vo and Io in the circuit
https://brainly.com/question/13889633          
#SPJ4

K=2*L-1 is the relationship between the number of nodes (K) and leaves (L). Therefore, L and k do not always have a stable relationship.

Number of internal nodes for L leaves = L - 1

So total nodes = 2L – 1

The following relation applies for a k-ary tree where each node has k offspring or none at all: L = (k-1)*n + 1.

where n represents the number of internal nodes and L represents the number of leaf nodes.

Every internal node will have K children since the k tree is fully developed.

A pointer to the topmost node of the tree, sometimes referred to as the "root," serves as the representation of a binary tree. The root's value is NULL if the tree is empty. The following components are present in each node of a binary tree:

Pointer to left kid in data

to the right-hand kid

Basic Binary Tree Operation:

adding a new element.

Learn more about Nodes here:

brainly.com/question/24068343

#SPJ4

Using APA reference style, the references is attached below from Feldman, R. S. (2013) to American Psychology Association (2020)

APA reference style is a style of citing sources used by the American Psychological Association. It is primarily used in the social sciences and includes guidelines for citing sources both within the text of a document and in the reference list at the end of the document. The guidelines provide a consistent way of citing sources to make it easier for readers to identify and locate the sources cited in a document.

In the given problem, if we need to write the reference using APA style, it will take this format below

Reference Page:

Feldman, R. S. (2013). Psychology and your life (2nd ed.). New York, NY: McGraw Hill Companies.

Frontline. (n.d.). League of denial. Retrieved from https://www.pbs.org/wgbh/frontline/film/league-of-denial/

Friends. (2004). The one after Joey and Rachel kiss [Television series episode]. In D. Crane, & M. Kauffman (Executive producers), Friends. Burbank, CA: Warner Bros. Television.

Silver Linings Playbook. (2012). [Motion Picture]. United States: The Weinstein Company.

U.S. Energy Information Administration. (2013). Annual energy outlook 2013 with projections to 2040. Retrieved from http://www.eia.gov/forecasts/aeo/er/pdf/0383er(2013).pdf

Snickers. (2013, April 2). You’re not you when you’re hungry [Video file]. Retrieved from https://youtu.be/2rF_FRCd_LA

American Psychological Association. (2020). Publication manual of the American Psychological Association (7th ed.). doi:10.1037/0000165-000

Learn more on APA reference style here;

https://brainly.com/question/28008158

#SPJ1

It is feasible to create code that installs Java and sets the Java Home to point to the Java installation location using knowledge of the computational language of JAVA.

In Java, there are several ways to copy elements from an array, including manually copying elements with a loop, making a copy of the array, and using Arrays. Java's copy Of() function or System. array Copy() can be used to begin moving elements between arrays. ERROR: The directory specified for JAVA HOME is invalid. "C: Program FilesJavajre7bin" is the value for JAVA HOME. Please modify your environment's JAVA HOME setting to correspond to where your Java installation is located I tried and worked on ANT. 1. launch cmd. 2. Enter "Mn -version". 3. On May 15, 2013, Apache Ant(TM) version 1.9.1 was compiled.

Learn more about Java here:

https://brainly.com/question/29897053

#SPJ4

Hypertension therapy and thermal nuclear propulsion are two distinct fields and they are not related. Hypertension therapy refers to the treatment and management of high blood pressure, while thermal nuclear propulsion refers to the use of nuclear energy to power vehicles, such as spacecraft.

Thermal nuclear propulsion technology is still under development and is not yet available for commercial use. Building a thermal nuclear propulsion system would require significant resources, including the development of a suitable reactor and the design and construction of a spacecraft capable of withstanding the intense heat and radiation generated by the reactor.

It would also require compliance with a wide range of safety, environmental and regulatory standards.

Therefore, As for hypertension therapy, it is typically managed through a combination of lifestyle changes, such as diet and exercise, and medication. The specific treatment plan will depend on the individual patient's blood pressure level, overall health, and any other health conditions they may have. It is important to consult a doctor or healthcare professional for personalized treatment recommendations.

Learn more about  thermal nuclear reactor from

https://brainly.com/question/2240073

#SPJ1

The point coordinates for all atoms that are associated with the FCC unit  cell, i.e. fig b are:

bottom face: (1,0,0) (1,1,0) (0,1,0) (1/2,1/2,0)

Tope face: (0,0,1) (1,0,1) (1,1,1) (0,0,1) (1/2,1/2,1)

front and back face: (1/2,1,1/2) (1/2,0,1/2)

Left and Right face: (0,1/2,1/2) (1,1/2,1/2)

Atoms are found in an FCC unit cell at the centre of each cube's face and at each of the crystal lattice's four corners. Only half of each atom, which is located at the face centre, belongs to one particular cell and is shared by two adjacent unit cells.

A crystal lattice in an FCC unit cell contains atoms in each corner. Additionally, every cube face has an atom in the centre of it. Two next-to-one another unit cells share this face-center atom. A unit cell only contains 12 of each atom.

Learn more about FCC unit cell

https://brainly.com/question/12977980

#SPJ4

According to the figure, G1 is represented by parts 4, 5, and 6 numbered part(s) of the cycle.

What is numbered part?
Numbered parts are individual parts of a larger item that are identified by a unique numerical identifier. This number can be used to easily locate and identify the part within the larger item. Numbered parts are often used in complex systems, such as machines, tools, vehicles, and buildings, where multiple components must be located and identified quickly and accurately. For example, a car engine may have hundreds of different numbered parts, each with its own unique identifier. Numbered parts also make it easier for manufacturers to track and inventory the parts used in their products. This helps them to ensure that the right parts are in place and available when they are needed.

To learn more about numbered part
https://brainly.com/question/11250014

#SPJ4

According to the question, the largest permissible bending moment is 1382.5 KN m.

What is bending moment?
Bending moment is a mechanical force that causes a bending or flexing effect on a structural element such as a beam, resulting in the creation of a moment or torque about the element's neutral axis. It is calculated based on the internal forces acting on the element, such as the weight of the beam and the force of the load applied to it. Bending moment can be positive or negative, depending on the direction of the force and the location of the neutral axis.

M = (h×A×E×σ_allowable)/6

M = ((9mm×30mm×70GPa×100MPa)+(9mm×30mm×105GPa×160MPa))/6

M = 1382.5 KN m

To learn more about bending moment
https://brainly.com/question/13390572

#SPJ4

When examining a force's geometric representation or its algebraic equivalent, the components of a force can be viewed as horizontal and vertical changes.

The vertical and horizontal forces that combine to create the resulting force are represented by a force's components. A force can be broken down into two parts that are either inclined or perpendicular to one another. Two components are referred to as rectangular components when they are perpendicular to one another and as inclined components when they are inclined toward one another. Force has two parts: magnitude and direction. When examining a force's geometric representation or its algebraic equivalent, the components of a force can be viewed as horizontal and vertical changes.

Learn more about magnitude here-

https://brainly.com/question/13686176

#SPJ4

The process in question is referred to as the iterative design process. Engineers utilize this method by completing and repeating a sequence of steps in order to continually improve and refine their designs as they work towards achieving the project goal. This approach allows for flexibility and adaptability in the design process, as engineers can make adjustments and modifications based on feedback and testing, ultimately leading to a more successful outcome.

The engineer observed that the tunnel was 460 feet long 26 days after the tbm was introduced. Therefore, the tunnel was completed 460 feet - 140 feet = 320 feet after the tbm was introduced.

What is tunnel?
A tunnel is an underground or underwater passageway, typically constructed for transportation purposes. Tunnels are typically used to bypass obstacles such as mountains, rivers, or bodies of water, or to provide a secure route for transportation of goods and people. Tunnels may also be used for mining, research, or military purposes. Tunnels can be constructed using a variety of materials, including steel, reinforced concrete, rock, earth and soil. The length of a tunnel varies from a few metres to several kilometres. When constructing a tunnel, safety is of paramount importance. Special engineering techniques are used to ensure the stability of the tunnel and its construction is closely monitored and regulated. Tunnels are designed to be resistant to weather, vibration, fire, and other environmental factors.

To learn more about tunnel
https://brainly.com/question/29050301

#SPJ4

Note that possessing an ASE Certification is crucial because; " Leads to better employment opportunities." (Option D)

ASE certification, commonly known as Automobile Service Excellence, is given to an automotive mechanic who has finished the necessary training and acquired their Automotive Service Excellence Certified Master Technicians criteria.

There are 58 ASE certification examinations available, covering nearly every facet of the automobile repair and service sector.

The National Institute for Automotive Service Excellence (ASE) offers four levels of certification. They are:

Learn more about ASE Certification:
https://brainly.com/question/28436848
#SPJ1

Wab = 2.41 rad/s and Wbc = 6.53 rad/s if the angular velocity are positive in a clockwise direction and negative in a anticlockwise direction.

Va/b = Va - Vb

Va = Va/b + Vb

Va = Wo*A

= 14.6 * 50

= 730 mm/s

we know that

Wab=125/sin24 = Wbc=110/sin76 = 730/sin80

Wab = 2.41 rad/s position/ counter clock wise

Wbc = 6.53 rad/s position/counter clock wise

Every point on an object revolving on an axis experiences the same angular velocity. Any point's tangential velocity varies with its separation from the rotational axis. The angular velocity unit is rad/s.

The direction of angular velocity, in the right-hand rule meaning, can be thought of as being along the rotational axis.

The link between angular velocity and the rate of change of angular displacement

Learn more about Angular velocity here:

https://brainly.com/question/14370151

#SPJ4

A supplementary grounding electrode is required when the only grounding electrode available is a metal underground water pipe.

What is grounding electrode?

A grounding electrode is a device or conductor that provides a direct electrical connection to the earth. It is used as a reference point for electrical systems to establish a zero potential, or ground, and provide a path for electrical current in the event of a fault.

Examples of grounding electrodes include metal underground water pipes, driven rods, plates, and underground networks of electrodes. These are required for safety and protection of electrical equipment and to limit the voltage to ground during normal operation and fault conditions.

To learn more about grounding electrode and conductor, visit: https://brainly.com/question/29558350

#SPJ4

The structure a) is indeterminate. The structures b, c, and d are statically indeterminate.

We know that if

r = 3n (Statically determinate)

r > 3n (Statically indeterminate)

r < 3 n (unstable)

r \geq 3n (unstable if reactions are concurrent or parallel)

where r = no.of reactions

n = no of parts

a) r = 2+2+1 = 5

n = 1, 3n = 3x1 = 3

5 > 3

Indeterminate upto 5 - 3 = 2 degrees

b) Unstable as all reactions are parallel

c) r = 3

n = 1 , 3(1) = 3

r = 3n

Statically Determinate

d) r = 2+2+2 = 6

n =2 , 3(2) = 6

r = 3n

Statically Determinate

e) Unstable as the reactions are concurrent meeting at common point

Frames can be classified by cutting closed loops and finding reactions

At each cutaway section three unknown forces are generated

b) 8 cuts are required generating 8x3 = 24 forces and 3 members

r = 24 +2+2+3 = 31

n = 3. r = 3(3) = 9

31 - 9 = 22

Indeterminate upto 22 degrees

c) 6 cuts are required generating 6x3 = 18 forces and 4 members

r = 18 + 3 + 3 = 24

n = 4 , 3(4) =12

24 - 12 = 12

Statically Indeterminate upto 12 degrees

To learn more about structures

https://brainly.com/question/10730450

#SPJ4

CPU SS: A two-core superscalar processor with two function units that can handle out-of-order issues (FUs). On each core, only one thread can be active at once. CPU MT.

a fine-grained multithreaded processor that enables simultaneous execution of instructions from two threads (i.e., there are two functional units), but only one thread's worth of instructions can be issued at a time. CPU SMT: A SMT processor that has two functional units and supports running instructions from two threads simultaneously. Instructions from either or both threads may be sent to execute on any cycle. A high-level, all-purpose programming language is the C language. It offers a simple, reliable, and effective interface for system programming.

Learn more about function here-

https://brainly.com/question/17216645

#SPJ4

The species are arranged in such planar manner. neither antiaromatic nor aromatic

species definition

A species is a unit of biodiversity as well as the fundamental categorization and taxonomic rank of an organism in biology. The biggest collection of creatures in which any two persons of the right sexes or mating types may conceive a fertile child, typically by sexual reproduction, is referred to as a species. A species can also be identified by its karyotype, DNA sequence, anatomy, behaviour, or ecological habitat. In addition, since fossil reproduction cannot be studied, palaeontologists employ the chronospecies idea. There are approx 8 and 8.7 million different species of eukaryotes, based on the most current accurate estimate.

To know more about species
https://brainly.com/question/13259455
#SPJ4

Refer to the attached images. Final answer is circled.

Answer:42.6 km/h

Khan said so

The magnitude of the force will depend on the speed and direction of the current, as well as the size and shape of the boat.

The force will also cause the boat to experience a change in its velocity, which will affect the motion of the boat and the passengers on board. When a boat encounters a current, the boat will experience a force due to the current. This force will act on the boat in the direction of the current and will cause the boat to move in the direction of the current. The magnitude of the force will depend on the speed and direction of the current, as well as the size and shape of the boat. The force will also cause the boat to experience a change in its acceleration, which will affect the motion of the boat and the passengers on board. The acceleration of the boat will be equal to the force divided by the mass of the boat. The acceleration will cause the boat to change its velocity, which will cause the boat to move in the direction of the current. The magnitude of the velocity change will depend on the magnitude of the acceleration and the time over which the acceleration is applied.

Learn more about the magnitude of the force here

https://brainly.com/question/30033702

#SPJ4

In order to determine absolute pressure, a complete vacuum is used. While the average atmospheric surface pressure is approximately 14.7 PSIA.

The pressure in a vessel absolutely devoid of any air molecules would be 0 PSIA. PSIA stands for absolute pounds per square inch. Absolute pressure is the pressure exerted with relation to absolute zero or vacuum. Engineering documents or P&IDs might employ PSIA. Pounds per square inch gauge is referred to as PSIG. PSIA is a word used to describe absolute pressure in PSI, which includes atmospheric pressure. "Total pressure" is another name for absolute pressure. We add 14.7 PSI since this atmospheric pressure is comparable to 14.7 PSI at sea level. Higher heights have lower atmospheric.

Learn more about engineering here-

https://brainly.com/question/27162243

#SPJ4

It is true that following client instructions is essential for a flawless delivery. We need 8–15 seconds for eye-lead to use REPS and Checks to remove distractions.

For the first query, "Delivery," the topic is how to satisfy clients by delivering what they have requested. Therefore, by according to the customer's instructions, we can accomplish a flawless delivery.

For the second question, REPS and check means identifying the risks, removing them, making plans, and looking for space. It also means checking for yourself, the risks, the space, and the speed.

To prevent accidents while driving, the REPS and check procedure is employed as a safety measurement. The eye-lead varies depending on the route followed, but it typically lasts between 8 and 15 seconds.

Learn more about REPS here:

https://brainly.com/question/29749274

#SPJ4

Environmental Impact Assessment (EIA) is often required for significant development projects such as road construction, building construction, and industrial facility construction in order to analyze and minimize any environmental repercussions.

It is to be noted that the process of determining how a project or activity will affect the environment is known as environmental impact assessment.

It assists individuals in ensuring that the project will not hurt animals, plants, or natural resources. This manner, we can be sure that the things we construct or do won't affect the world.

Learn more about Environmental Impact Assessment:
https://brainly.com/question/30120335
#SPJ1