consider this segment of polypeptide compound found in wasp venom. identify the amide bonds in this compound.

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml

The reaction between 2NaOH (aq) and H2SO4 (aq) is reversible. The reaction between Na2SO4 (aq) and 2H2O (l) is irreversible. The reaction between 4HCl (g) and O2 (g) is irreversible. The reaction between CO2 (g) and C (s) is also irreversible.

In the first reaction, 2NaOH (aq) and H2SO4 (aq) react to form Na2SO4 (aq) and 2H2O (l). This reaction is reversible because it can be reversed to its original reactants, 2NaOH (aq) and H2SO4 (aq).
In the second reaction, Na2SO4 (aq) and 2H2O (l) react to form H2SO4 (aq) and 2NaOH (aq). This reaction is irreversible because the reactants cannot be reversed to their original form.
In the third reaction, 4HCl (g) and O2 (g) react to form 2H2O (g) and 2Cl (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.
In the fourth reaction, CO2 (g) and C (s) react to form 2CO (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.

For more such questions on reaction

https://brainly.com/question/29470602

#SPJ11

Answer:

Mg (s) + 2 HCl (aq) → MgCl 2 (aq) + H 2 (g)

Explanation:

The major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone is an imine.

A functional group or organic substance with a carbon-nitrogen double bond (C=N) is known as an imine. A hydrogen atom or an organic group may be joined to the nitrogen atom. (R). The carbon atom is connected to two more single bonds. Imines are present in numerous processes and are frequently found in manufactured and naturally occurring chemicals.

The five core atoms for ketimines and aldimines, C2C=NX and C(H)C=NX, respectively, are coplanar. The sp2-hybridization of the mutually double-bonded nitrogen and carbon atoms yields planarity. For nonconjugated imines, the C=N distance is 1.29-1.31, whereas for conjugated imines, it is 1.35. The C-N distances in amines and nitriles, on the other hand, are 1.47 and 1.16, respectively. Slow rotation occurs around the C=N bond. E- and Z-isomers were detected using NMR spectroscopy of aldimines have been detected. Owing to steric effects, the E isomer is favored.

An imine is formed when a primary amine reacts with a carbonyl group (C=O) of an aldehyde or ketone to form a new C-N bond. This reaction is known as a condensation reaction, as it involves the loss of a small molecule (e.g. water) to form the product.

For more such questions on condensation reaction , Visit:

https://brainly.com/question/1361341

#SPJ11

The correct questions is :

What  is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?

The original concentration of the H₂C₂O4 solution is 0.7455 mol/L.

The balanced chemical equation for the reaction between H₂C₂O4 and NaOH is:

H₂C₂O4 + 2NaOH → Na₂C₂O₄ + 2H₂O

From this equation, we can see that the acid reacts with the base in a 1:2 ratio, meaning that one mole of H₂C₂O4 will react with two moles of NaOH.

To find the original concentration of the acid solution, we need to use the formula for calculating molarity:

Molarity = moles of solute / volume of solution (in liters)

We can start by calculating the number of moles of NaOH used in the titration:

moles of NaOH = Molarity x volume of NaOH used (in liters)

moles of NaOH = 0.4700 mol/L x 0.05820 L

moles of NaOH = 0.027354 moles

Since the acid and base react in a 1:2 ratio, we know that the number of moles of H₂C₂O4 is half the number of moles of NaOH used:

moles of H₂C₂O4 = 0.027354 moles / 2

moles of H₂C₂O4 = 0.013677 moles

Now we can use the formula for molarity to calculate the original concentration of the acid solution:

Molarity of H₂C₂O4 = moles of H₂C₂O4 / volume of H₂C₂O4 used (in liters)

Molarity of H₂C₂O4 = 0.013677 moles / 0.01835 L

Molarity of H₂C₂O4 = 0.7455 mol/L

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ1

The curved arrows are as follows: P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ

The reactants and products of E2 reaction are given. The curved arrow mechanism needed to be depicted. The electron movement happens in such a way so that the incoming base extracts a proton and the removal of leaving group takes place.

E2 reaction: It stands for elimination reaction following second order kinetics. In E2 reaction, the base abstracts the

hydrogen and removal of the leaving group simultaneously in the same step. A general mechanism is shown below:

(n-x)

Step: 1

The base is the hydroxyl ion and the leaving group is bromine as shown below:

P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ; here x=0,1,2,...,n for 0≤p≤1

The hydroxyl ion is the base since it has the ability to donate a pair of electrons. The bromine is the leaving group since it can accommodate the negative charge. Generally, halogens are good leaving groups because they can accommodate the negative charge due to their high electronegativity.

Step: 2

The curved arrows are as follows:

P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ

The movement of electrons is in such a way as shown above because the base present that is hydroxyl ion can accept proton. Therefore, it extracts a proton. In an E2 reaction, the leaving group is removed at the same time. Therefore, the bromide ion is removed as it can bear the negative charge.

Learn more about electrons here: brainly.com/question/28977387

#SPJ4

Complete question is attached below

Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms.

Atoms are the basic building blocks of all matter, and are the smallest particles known to exist. Atoms are made up of protons, neutrons and electrons. Protons are positively charged particles located in the nucleus of the atom, while neutrons are neutral particles also located in the nucleus. Electrons are negatively charged particles that orbit the nucleus.

a) Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms. The presence of the double bond creates a greater degree of unsaturation than single-bonded hydrocarbons, allowing them to form more chemical bonds and react with other molecules.

b) A carbon-carbon double bond forms when two carbon atoms share two pairs of electrons. The double bond is formed by overlapping the two sp2 hybrid orbitals on each carbon atom.

c) The reaction between ethene and hydrogen bromide (HBr) is an example of an electrophilic addition reaction. In this reaction, HBr acts as an electrophile, meaning it is attracted to the electrons in the double bond of the ethene molecule. The electrons from the double bond are shared between the two atoms in the HBr molecule, forming a covalent bond. This process is known as nucleophilic attack.

The reaction mechanism is shown below:

Step 1: Electrophilic attack of the hydrogen atoms of HBr to the electrons in the double bond of the ethene molecule.

HBr + Ethene → H-Br + Carbocation

Step 2: Nucleophilic attack of a bromide ion on the carbocation, forming a new covalent bond.

Br− + Carbocation → H-Br + Bromoethane

To learn more about atoms

https://brainly.com/question/6258301

#SPJ1

The mass of the gas in the preceding problem is 30.1 g.

To find the molar mass or molecular weight of the gas, we'll use the Ideal Gas Law, which is given as: PV = nRT where, P = pressure of the gas V = volume of the gas n = number of moles of the gas R = ideal gas constant T = temperature of the gas We can rewrite the Ideal Gas Law as: M = (mRT) / (PV) where, M = molar mass or molecular weight of the gas m = mass of the gas R = ideal gas constant T = temperature of the gas P = pressure of the gas V = volume of the gas Substituting the given values in the above formula, we get: M = (30.1 g x 0.0821 L atm mol-1 K-1 x 273 K) / (1 atm x 0.228 L)≈ 29.1 g/mol Hence, the molar mass or molecular weight of the gas is approximately 29.1 g/mol.

for more such questions on mass

https://brainly.com/question/86444

#SPJ11

At has a higher initial ionisation energy than Br, while Br has a bigger atomic radius. Se has a bigger atomic radius than Br, and Br has a higher initial ionisation energy than Se.

The most loosely bound electron is further from the nucleus and thus easier to remove in bigger atoms. Hence, the ionisation energy should decrease as size (atomic radius) increases.

This is because the outer electrons aren't bound as strongly because they are farther from the nucleus.

To know more about ionisation energy visit:-

brainly.com/question/27356170

#SPJ1

The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.

Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.

Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.

The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .

Thus, the cis to the hydroxyl (OH)  is (B) 2 and 3.

For more such questions on Cis-trans , Visit:

https://brainly.com/question/13557044

#SPJ11

The mass of water driven off during popping can be calculated by subtracting the mass of the popped corn and the dish from the mass of the dish and kernel before heating.

Heating is the process of increasing the temperature of a substance or object, typically using an external energy source such as heat, radiation, or electrical current. The heat energy is transferred to the object or substance, causing its particles to vibrate and move faster, which results in an increase in temperature. Heating is commonly used in a wide range of applications, including cooking, chemical reactions, industrial processes, and space heating.

Cooking is the process of preparing food by applying heat, typically using methods such as baking, roasting, grilling, frying, boiling, simmering, steaming, or microwaving. The aim of cooking is to make food more palatable and easier to digest, as well as to kill harmful bacteria and other microorganisms that may be present in raw food. Cooking can also enhance the nutritional value of some foods by making certain nutrients more bioavailable.

To know more  about heating visit :

https://brainly.com/question/1429452

#SPJ1

Answer:

2.00 M

Explanation:

In a titration, we can determine the concentration of an unknown acid by adding a known concentration of a base, such as NaOH, until the reaction is complete. At the endpoint of the reaction, the amount of base added is equal to the amount of acid present in the sample.

From the problem, we know that the NaOH solution has a concentration of 0.5 M, and that 24.8 mL of NaOH is required to completely react with the unknown acid in the flask. We can use this information to calculate the number of moles of NaOH that were added:

moles of NaOH = concentration x volume

moles of NaOH = 0.5 mol/L x 0.0248 L

moles of NaOH = 0.0124 moles

Since the reaction is a neutralization reaction between an acid and a base, the number of moles of NaOH added is equal to the number of moles of acid in the flask. Therefore, we can calculate the concentration of the acid using the volume of acid added:

moles of acid = moles of NaOH

moles of acid = 0.0124 moles

volume of acid = 6.2 mL = 0.0062 L

concentration of acid = moles of acid / volume of acid

concentration of acid = 0.0124 moles / 0.0062 L

concentration of acid = 2.00 M

Therefore, the exact concentration of the unknown acid is 2.00 M.

Answer:

As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.

Explanation:

Taking into account the definition of dilution, if chemist must dilute 93.1 mL of 7.79 of uM aqueous mercury (I) chloride solution until the concentration falls to 3.00 uM, the final volume is 0.24175 L.

Dilution is a procedure by which the concentration of a solution is lowered, usually with the addition of a diluent.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

7.79 uM× 93.1 mL= 3 uM× Vf

Solving:

(7.79 uM× 93.1 mL)÷ 3 uM= Vf

241.75 mL= 0.24175 L = Vf (being 1000 mL= 1 L)

In summary, the final volume is 0.24175 L.

Learn more about dilution:

brainly.com/question/6692004

#SPJ1

The volume of the gas on a warm day when the temperature is 11 °C, given that the volume was initially 3000 L, is 2784.3 L

The following data were obtained from the question:

We can obtain the volume of the gas on the warm day by using Charles' law equation. This is shown below:

V₁ / T₁ = V₂ / T₂

3000 / 306 = V₂ / 284

Cross multiply

306 × V₂ = 3000 × 284

306 × V₂ = 852000

Divide both side by 306

V₂ = 852000 / 306

V₂ = 2784.3 L

Thus, the volume on the warm day is 2784.3 L

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

The acid in the reaction would donate a proton and that would be HNO2.

An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.

When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

In chemistry, calibration is defined as the act of making sure that any scientific process/ instrument produce results which are accurate.

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

For example, if the bottom of the meniscus of liquid in the cylinder is at 6 ml mark and the top of the meniscus is between the 14 ml and 16 ml marks, we can estimate that the volume of liquid in cylinder is between 6 ml and 16 ml, but we cannot estimate a value in between such as 8 ml or 10 ml.

To know more about calibration, refer

https://brainly.com/question/30286269

#SPJ1

The major organic product of an SN2 substitution reaction is an alkene, which may be either in retention or inversion of configuration relative to the original substrate.

The reaction you are asking about is an SN2 substitution reaction, in which a nucleophile (Nu) displaces a leaving group (LG) from a molecule with an alkyl halide substrate. The major organic product of this reaction will be an alkene, which has the same carbon chain as the alkyl halide substrate. Depending on the relative configuration of the substrate, the alkene product may be the same as the original substrate (retention) or have its configuration inverted (inversion). If stereochemistry is relevant to the question, then it should be specified in the answer.

To learn more about SN2 substitution :

https://brainly.com/question/29849583

#SPJ11

Answer: Approximately 267.5 Kelvin

Explanation:

To find the temperature of a sample of neon with an rms speed of 500.0 m/s, we can use the following formula that relates the root mean square (rms) speed of gas molecules to their temperature:

v_rms = sqrt((3kT) / m)

where v_rms is the rms speed of the gas molecules, k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of a single gas molecule.

For neon, the mass of a single molecule is approximately 20.18 atomic mass units (u), which is equivalent to 3.35 x 10^-26 kg.

Substituting the given values into the formula, we get:

500.0 m/s = sqrt((3kT) / (3.35 x 10^-26 kg))

Solving for T, we get:

T = (m / (3k)) * v_rms^2

T = (3.35 x 10^-26 kg / (3 * 1.38 x 10^-23 J/K)) * (500.0 m/s)^2

T ≈ 267.5 K

Therefore, the temperature of the neon sample with an rms speed of 500.0 m/s is approximately 267.5 Kelvin.

Answer: 2. The area of a square with sides 2.50 cm long is:

Area = side × side = 2.50 cm × 2.50 cm = 6.25 cm²

The thickness of the platinum sheet is 0.25 mm, which is equivalent to 0.025 cm.

Therefore, the volume of the platinum sheet is:

Volume = Area × thickness = 6.25 cm² × 0.025 cm = 0.15625 cm³

So, the volume of the platinum sheet is 0.15625 cm³.

Explanation:  3  To convert milliliters (mL) to liters (L), we need to divide the volume in milliliters by 1000.

So, to convert the volume of a wine bottle from 750 mL to liters, we can use the formula:

Volume in liters = Volume in milliliters ÷ 1000

Plugging in the values, we get:

Volume in liters = 750 mL ÷ 1000 = 0.75 L

Therefore, a standard wine bottle has a volume of 0.75 liters.

Answer: Cleavage

Explanation:

When a mineral breaks along a weekly bonded plane it is called cleavage

The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be: 40℅ benzene and 60℅

Distillation is a technique used to separate the components of a combination made up of two liquids that mix well. The liquid mixture is boiled, evaporated, condensed, and isolated using this technique.

The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.

We are aware that pure benzene has a boiling point of 80 oC.

Pure toluene has a boiling point of 106 oC.

As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 oC.

The mixture contains 40 percent benzene and 60 percent toluene by percentage.

Read more on distillation temperature here:https://brainly.com/question/29439897

#SPJ1

This claim is untrue. A developmental mismatch between the maturation of various brain systems, particularly the prefrontal cortex, and the limbic system, is a hallmark of the teenage brain.

The limbic system, which is engaged in emotion regulation and reward processing, develops earlier than the prefrontal cortex, which is in charge of impulse control, decision-making, and other executive processes.

Teenagers may therefore be more likely to participate in a dangerous activity and seek out unique experiences, but they may also have trouble controlling their impulses and making reasoned decisions.

The development of the brain is a complicated and ongoing process, and individual variations in neural maturation and life events can also have an impact on teenage behavior and decision-making.

However, there is no typical pattern of adolescent behavior or brain function due to individual variances and ongoing brain development.

learn more about controlling behavior here

https://brainly.com/question/6646156

#SPJ1

The mass of lead (IV) sulfite containing 7.25 x 10^23 sulfur atoms is 3.36 x 10^26 g.

What is Mass?

Mass is a fundamental physical property of matter that describes the amount of substance in an object or system. It is commonly measured in units of kilograms (kg) or grams (g). Mass is often confused with weight, but they are not the same thing. Weight is the force exerted on an object due to gravity, while mass is the amount of matter in the object.

To solve this problem, we need to first find the molar mass of lead (IV) sulfite (Pb(SO3)2), which contains one lead atom, two sulfur atoms, and six oxygen atoms per formula unit.

The molar mass of lead (IV) sulfite can be calculated as follows:

Pb(SO3)2: 1 x molar mass of Pb + 2 x molar mass of S + 6 x molar mass of O

= 1 x 207.2 g/mol + 2 x 32.1 g/mol + 6 x 16.0 g/mol

= 927.0 g/mol

Next, we can use the Avogadro's number to convert the given number of sulfur atoms to the corresponding number of moles of lead (IV) sulfite:

7.25 x 10^23 sulfur atoms x 1 mole Pb(SO3)2/2 moles S = 3.63 x 10^23 moles Pb(SO3)2

Finally, we can use the molar mass of lead (IV) sulfite to convert the number of moles to mass:

3.63 x 10^23 moles Pb(SO3)2 x 927.0 g/mol = 3.36 x 10^26 g

Therefore, the mass of lead (IV) sulfite containing 7.25 x 10^23 sulfur atoms is 3.36 x 10^26 g.

Learn more about Mass from given link

https://brainly.com/question/86444

#SPJ1

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

Answer: 9084355.951 L  if need in correct sig figs answer is

9.08 X 10^6 L

Explanation:

Ideal gas law  PV=nRT  = V=nrt/P

R= 62.44

n=0.511

T= 513

P= 555

V= 0.511 X 62.44 X 513 / 555

No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .

A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.

The following reactions are involved to determine Cl- concentration,

Case 1:  Fe(NO3)3 (aq.) + Cl-(aq.)   ----> FeCl3(aq.) + NO3-(aq.).

In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.

Case 2 :

AgNO3(aq.) + Cl- (aq.)  ---> AgCl(precipitate) + NO3-.

This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .

To learn more about Solubility Rule

https://brainly.com/question/15596863

#SPJ4

This lone pair makes the molecule polar. H2O also has a dipole moment due to the bent structure and the electronegativity difference between hydrogen and oxygen. Therefore, the correct answer is option d. None of the above.

The molecule that does not have a dipole moment is CO2. A dipole moment is a measurement of the separation of two opposite electrical charges in a molecule. The molecule is polar when there is a dipole moment. CO2 is a linear molecule that consists of two polar C-O bonds that are arranged in a straight line. However, the two dipole moments are opposite and equal, which means that they cancel each other out. Thus, the molecule is not polar, and there is no dipole moment for CO2. On the other hand, both NH3 and H2O have a dipole moment. NH3 has a trigonal pyramidal structure that has a lone pair of electrons on the nitrogen atom.

To learn more about  Lone pair :

https://brainly.com/question/3915115

#SPJ11