constrast a mixture and a compound , how are. they different?​

According to molar concentration , the molality of the solution up to second decimal place  is 0.31  m.

To learn more about molar concentration refers to:

brainly.com/question/30228037

#SPJ4

According to molar concentration, the molality of the solution up to second decimal place is 0.31m.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution. Most commonly used unit for molar concentration is moles/liter. The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion.

Understanding a solution's molarity is important since it allows you to determine the actual concentration as well as whether the solution is diluted or concentrated. Measures of solution concentration include molality and molarity.

Molarity = 0.32 mol of solute / 1 L solution.

To find kg of solute-0.32 mol of solute x 146.8 g/mol = 46.976 g = 0.046976 kg.

To find kg of solution: 1 L solution x (1000 mL / 1 L) x (1.08 g/mL) (1 kg / 1000 g) = 1.08 kg solution.

To find kg of solvent: 1.08 kg solution - 0.046976 kg solute = 1.033 kg water.

Thus, molality = 0.32 mol solute / 1.033 kg water = 0.31 mol/kg

To learn more about molar concentration refer to:

brainly.com/question/30228037

#SPJ4

Niobium has an atomic mass of 92.90638 u. An atomic mass unit serves as the unit of measurement for mass (amu). A mass unit of an atom is 1.66 x 10-24 grammes.

What does the term "atomic" refer to?

Atomic is derived from the Greek word atomos, which means "uncut" or "indivisible," and means "indivisible particle" in Latin. atomic is defined as an adjective that refers to, contains, or is related to atoms.

What does atomic energy entail?

Nuclear energy, also known as atomic energy, is the considerable quantity of energy released in operations that have an impact on atomic nuclei, or dense centres of atoms. It differs from other atomic phenomena' energy, which solely involves an atom's orbital electrons in regular chemical reactions, for example.

To know more about atomic visit:

https://brainly.com/question/1566330

#SPJ1

Answer:

1 mole of Nb = 92.906 grams

The atomic model changes over time because the atomic model was based on theories and discoveries.

The simplest atomic model is the Dalton atomic model, which was put forward by John Dalton, a British scientist. According to this atomic model, atoms are solid balls that have no charge. In addition, according to this atomic theory, the atom is the smallest unit that cannot be divided again. Different chemical elements will have different types of atoms.

Unfortunately, Dalton's theory cannot explain how atoms as solid balls can conduct electric current. In fact, electricity is electrons in motion. He could not prove other particles that conduct electric current. Dalton's theory was followed hundreds of years later until it was finally broken by later scientists.

The second atomic model is the Thompson atomic model. As the name implies, this atomic model was discovered by Joseph John Thompson. Thompson's atomic model is shaped like a raisin bun. That's because the atom is a positively charged solid ball with negative particles (electrons) scattered in it. In addition, the number of positive and negative charges on the atom is the same. This atomic model was proven by Thomson's research using cathode ray tubes.

Unfortunately, Thomson's model of the atom cannot explain the arrangement of positive and negative charges in an atom.

Rutherford's atomic model put forward by Ernest Rutherford in 1911. In this atomic theory, each atom contains a positively charged atomic nucleus with electrons surrounding it in its trajectory. In addition, this atomic mass is concentrated in the atomic nucleus and most of the atomic volume is empty space, you know. This was proven from the results of an experiment on firing metal by alpha rays, which is also known as the Geiger-Marsden Experiment.

Learn more about atomic model at https://brainly.com/question/9145431.

#SPJ4

Answer: Jhon cena licked my

Explanation:

HF, H[tex]_2[/tex]C[tex]_2[/tex]0[tex]_4[/tex] , H[tex]_2[/tex]SO[tex]_3[/tex] are acid. Ca(OH)[tex]_2[/tex], RbOH are base. NH[tex]_4[/tex]Cl, NaF, CaCl[tex]_2[/tex] are salts, among all the given options.

Numerous acids and bases are found in nature on a regular basis, including citric acid in citrus fruits like oranges and lemons, tartaric acid and tamarind, malic acid the apples, lactic acid and milk and dairy products, and hydrochloric acid and gastric fluids. Similar to acids, several bases are present, including lime water. In our daily lives, we utilise several of these acids, like vinegar and acetic acid within the kitchen, lactic acid for washing clothes, baking soda for cooking, washing soda to cleaning, etc. HF, H[tex]_2[/tex]C[tex]_2[/tex]0[tex]_4[/tex] , H[tex]_2[/tex]SO[tex]_3[/tex] are acid. Ca(OH)[tex]_2[/tex], RbOH are base. NH[tex]_4[/tex]Cl, NaF, CaCl[tex]_2[/tex] are salts,

To know more about acid, base and salts, here:

https://brainly.com/question/1287824

#SPJ6

5) The theoretical yield of H₂O is 36.04g.

6) The theoretical volume of CO2 produced is 0.005 L.

7) The mass of water produced is 0.981g.

The theoretical yield of a reaction is the maximum amount of product that can be produced from a given amount of reactants, assuming that the reaction goes to completion. To calculate the theoretical yield, we need to know the balanced equation for the reaction and the amounts of reactants used.

5) Given and unknown:

The balanced equation for the reaction is 2 H2(g) + O2(g) → 2 H₂O(1)

The amount of H2 used is 6

The amount of O2 used is 30g

Steps:

1.    Determine the limiting reactant: The limiting reactant is the reactant that will be completely consumed before the other reactant is consumed. In this case, the limiting reactant is H2 because 6g of H2 will react completely with 6g of O2, while 30g of O2 will still have some remaining.

2.    Calculate the theoretical yield of the product: The theoretical yield of H2O can be calculated by using the stoichiometry of the reaction. The balanced equation tells us that 2 moles of H2 react with 1 mole of O2 to form 2 moles of H2O. We can use the molar mass of H2 and O2 to convert the given mass of each reactant to moles, and then use the balanced equation to determine the theoretical yield of H2O.

Solution:

·         Molar mass of H2 = 2.02 g/mol

·         Molar mass of O2 = 32 g/mol

·         6g of H2 is equal to 6/2.02 = 2.97 moles

·         30g of O2 is equal to 30/32 = 0.9375 moles

·         Since H2 is the limiting reactant, the reaction will consume 2.97 moles of H2.

·         Using the balanced equation, 2 moles of H2 will produce 2 moles of H2O

·         Therefore, the theoretical yield of H2O is 2 x 18.02 = 36.04 g

·         Therefore, the theoretical yield of H₂O is 36.04g.

6) Given and unknown:

The balanced equation for the reaction is 2 C2H6(g) + 7 O2(g) → 6 H2O(l) + 4 CO2(g)

The volume of C2H6 used is 0.42L

The volume of O2 used is 3.12L

The unknown is the theoretical volume of CO2 produced

Steps:

Convert the volumes of reactants to moles using the ideal gas laws PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant and T is the temperature.

Determine the limiting reactant: The limiting reactant is the reactant that will be completely consumed before the other reactant is consumed.

Use the balanced equation to calculate the number of moles of CO2 produced.

Convert the moles of CO2 to volume using the ideal gas laws PV = nRT

Solution:

Ideal gas constant R = 8.314 J/mol*K

Temperature T = 298 K

Pressure P = 1 atm

Molar mass of C2H6 = 30.07 g/mol

Molar mass of O2 = 32 g/mol

Molar mass of CO2 = 44 g/mol

0.42L of C2H6 is equal to 0.42 x (1 x 10^3) / (8.314 x 298) = 0.0058 mol

3.12L of O2 is equal to 3.12 x (1 x 10^3) / (8.314 x 298) = 0.0433 mol

From the balanced equation, we can see that for every 2 moles of C2H6, 4 moles of CO2 are produced.

Therefore, 0.0058 mol of C2H6 will produce 0.0058 x 2 = 0.0116 mol of CO2

Finally, 0.0116 mol of CO2 will produce 0.0116 x (44/1000) = 0.005L of CO2.

Therefore, the theoretical volume of CO2 produced is 0.005 L

7) Given and unknown:

The balanced equation for the reaction is 4 NH3(g) + 5 O2(g) → 4 NO(g) + 6 H₂O(1)

The mass of NH3 used is 1.54g

The mass of O2 used is 1.25g

The unknown is the mass of water produced

Steps:

Determine the limiting reactant: The limiting reactant is the reactant that will be completely consumed before the other reactant is consumed.

Use the balanced equation to calculate the number of moles of water produced.

Calculate the mass of water produced by using the molar mass of water

Solution:

Molar mass of NH3 = 17 g/mol

Molar mass of O2 = 32 g/mol

Molar mass of H2O = 18 g/mol

1.54g of NH3 is equal to 1.54 / 17 = 0.0906 mol

1.25g of O2 is equal to 1.25 / 32 = 0.0391 mol

From the balanced equation, we can see that for every 4 moles of NH3, 6 moles of H2O are produced.

Therefore, 0.0906 mol of NH3 will produce 0.0906 x 6 = 0.0544 mol of H2O

Finally, 0.0544 mol of H2O will produce 0.0544 x 18 = 0.981g of H2O

Therefore, the mass of water produced is 0.981g

To know more about theoretical yield of a reaction visit:

https://brainly.com/question/20522162

#SPJ1

Lewis dot structure is used to represent the lone pairs of electrons and bonded pair of electrons in an atom or a molecule of an element.

The Lewis dot structure of an atom or molecule shows the valence shell electrons around the symbol of the element. The valence electrons are written in pairs and are written as dots. Neon belongs to the 18th group of the periodic table and thus is a noble gas. It has eight valence electrons. Lewis structures is also known as Lewis dot structures or electron dot structures are diagrams that represent the valence electrons of atoms within a molecule. The Lewis symbols and Lewis structures help visualize the valence electrons of atoms and molecules whether they exist as lone pairs or within bonds.

To learn more about Lewis dot structure please visit:

https://brainly.com/question/20300458

#SPJ4

Pea plants uses the light energy from sun for photosynthesis and they synthesis chemical energy in leaves.

Photosynthesis is a biochemical process taking place in green plants to synthesis energy with the aid of light energy. The green pigments chlorophyll absorbs enough light energy for this biochemical reactions.

The photosynthetic reaction is the reaction between water and carbon dioxide producing glucose and oxygen. Thus, this process intakes carbon dioxide that we exhale and release oxygen that aids our respiration.

Pea plants are green plants undergoing photosynthesis. They uses light energy to produce chemical energy. With the presence of sunlight, they can easily carry photosynthetic reaction in leaves.

Find more on photosynthesis:

https://brainly.com/question/29764662

#SPJ1

In chemistry, a hydroxy or hydroxyl group is a functional group with the chemical formula -OH and consists of an oxygen atom covalently bonded to a hydrogen atom. In organic chemistry, alcohols and carboxylic acids contain one or more hydroxyl groups. In organic chemistry, an aldehyde is an organic compound containing a functional group with the structure R-CH=O. The functional group itself is sometimes called an aldehyde, but it can also be classified as a formyl group. Aldehydes are ubiquitous and play an important role in technology and biology. The group priority is -OCH3>OH>COOH>CHO. According to the F. Cahn-Ingold-Prelog system, a priority (1, 2, 3, or 4) is assigned in descending order of atomic number to the atoms directly bonded to the stereocenter the atom with the highest atomic number gets the highest priority.

True- Alchemists tried to turn metals into gold. True-If the medicines have been evaluated using unbiased tests.

True- A medieval pseudoscience that tried to find ways to change ordinary metals into gold.

Alchemy is a historical philosophical and proto scientific tradition that was practiced in China, India, the Muslim world, and Europe. It is an old branch of natural philosophy also.

In the early few centuries AD, a handful of pseudo epigraphical works produced in Greco-Roman Egypt are the first to mention alchemy in its Western form.

Which inference can be made from the fact that Fritz Haber received a Nobel Prize in 1918

The Haber-Bosch process was used to make explosives in World War I and The Haber-Bosch process was an important scientific development.

To know more about Alchemy visit

brainly.com/question/11205647

#SPJ1

Cyanides inhibit lactose permease by abolishing the proton gradient between the inside and outside of the cell

By interfering with the proton gradient across the cell membrane, cyanides prevent the lactose permease protein from transporting lactose across the membrane. Protons (H+) are pumped out of the cell by the proton-motive force, which results in a difference in proton concentration between the inside and outside of the cell and creates the proton gradient.

This proton gradient is used by lactose permease to propel lactose transport into the cell. The enzyme cytochrome oxidase, which is found in the mitochondria and is in charge of the last stage of the electron transport chain, binds to the iron atom in the active site. This binding prevents the enzyme from working, which inhibits proton pumping and causes the proton gradient to fall, both of which hinder lactose permease from working.

Read more about Cyanides on:

https://brainly.com/question/13655468

#SPJ4

The number of ammonia molecules made when 6 grams of hydrogen gas reacts with excess nitrogen is 1.79 * 10^24. So the answer is (a) 24 x 10 ^ 23

The balanced equation for the reaction of hydrogen gas (H2) with nitrogen gas (N2) to form ammonia (NH3) is:

2H2 + N2 -> 2NH3

If the reaction uses 6 grams of hydrogen gas, we can use the molar mass of hydrogen (2.02 g/mol) to find the number of moles of hydrogen used in the reaction:

6 g / 2.02 g/mol = 2.97 mol

Since the equation states that 2 moles of hydrogen are needed to produce 2 moles of ammonia, then 2.97 moles of hydrogen will produce 2.97 moles of ammonia.

To find the number of ammonia molecules, we multiply the number of moles by Avogadro's number:

2.97 mol * 6.022 * 10^23 molecules/mol = 1.79 * 10^24

Read more about moles:

https://brainly.com/question/14357742

#SPJ4

Hydrogen

Magnesium

Iron

Helium

Sulfur

Copper

Aluminum

Argon

Xenon

etc.

There would be 4 * 10^22 moles of the sodium ions.

We have to know that the number of moles of the ions can be obtained by the use of the formula for the Avogadro's number. From the Avogadro's number, we know that one mole of the substance is going to contain about 6.02 * 10^23 molecules of the sodium ions.

As such we have that;

If 1 mole can contain about 6.02 * 10^23 molecules of the sodium ions

x moles would contain 2.4x10^46 molecules of Na ions

x = 1 * 2.4x10^46/ 6.02 * 10^23

x = 4 * 10^22 moles

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

Answer:

The density of any given liquid is equivalent to the mass of the liquiddivided by the volume of the liquid.From the given information, we have:The mass of the unknown liquid to be = 972 gThe volume of the unknown liquid to be = 0.610 L = 610 cm³If the formula for calculating Then;The Density of the unknown liquid ≅ 1.593  g/cm³In conclusion, the density of the unknown liquid is 1.593  g/cm³ to 3 significant figures.

Explanation:

Pls mark as brainliest

The internal structure and external features of organisms have evolved to enhance their survival in various ways.

Internal structure refers to the internal organs and systems of an organism, such as the circulatory, respiratory, and nervous systems. These systems work together to maintain the organism's homeostasis, or internal balance, which is necessary for survival.

For example, the circulatory system transports oxygen and nutrients to cells, while the respiratory system removes carbon dioxide and other waste products.

External features, such as body shape, coloration, and behavior, also play a role in an organism's survival. For example, camouflage can help an organism avoid predators, while bright colors can signal to potential mates. The shape of an organism can also be important for survival.

Overall, they work together to enhance the organism's chances of survival by allowing it to find food, avoid predators, and reproduce successfully.

To know more about organisms, visit:

brainly.com/question/12825206

#SPJ1

Give a handwritten explanation and response. Estimate the expected melting temperature of cadmium (Cd), vanadium, and other elements based on the patterns you have found.

What does melting point mean?

The temperature at which a pure substance's solid and liquid states can coexist in equilibrium is known as the melting point. A solid's temperature will rise when heat is added to it until its melting point is reached.

How do melting and boiling points differ?

The melting point

The temperature that a quality of output into a liquid under normal air pressure is known as the melting point. The temperature at which a liquid's vapor pressure equals the pressure around it, turning the liquid into vapor (and vice versa).

To know more about melting point visit:

https://brainly.com/question/29578567

#SPJ1

The formula for ionic compound always indicate empirical formula. Empirical formula is the lowest number of the condition of the element present in a compound..

Empirical formula is formula represent the minimum condition of the reaction to happen between element. Empirical formula is commonly use to calculate the important value of a compound such as:

Learn more about empirical formula here

https://brainly.com/question/1603500

#SPJ4

A person uses 720 kcal on a long bike. A. The energy in joules is equal to 3221680 Joules. B. The energy in kilojoules is 3221.689 KJ.

The term energy is defined as the capacity for doing work. It is exist in different types like potential, kinetic, thermal, electrical, chemical, nuclear, or other forms.

Given the energy used for the bike is 770 kcal.

We know that

1 cal = 4.184 J

The energy in Joules = 770 × 1000 × 4.184

= 3221680 J

The energy in kilojoules =  3221689 / 1000

= 3221.689 KJ

Thus, A. The energy in joules is equal to 3221680 Joules. B. The energy in kilojoules is 3221.689 KJ.

To learn more about the energy, follow the link;

https://brainly.com/question/1932868

#SPJ1

Surface mucous cells (foveolar cells), parietal cells, chief cells are the three main types of cells located in stomach.

The stomach lining is covered by these cells' thick mucus, which shields it from the digestive juices. The stomach lining is always protected because the surface mucous cells continuously regenerate.

The gastric pits, which are primarily found in the fundus, the upper region of the stomach, contain parietal cells. They release hydrochloric acid, which aids in the digestion of meals.

The fungus, where the gastric glands are located, contains chief cells. They release digestive enzymes that aid in food digestion. Pepsinogen is secreted by the main cells. In the presence of hydrochloric acid, it turns into pepsin. Pepsin aids in the breakdown of proteins into little molecules called polypeptides.

To look more about stomach click here

brainly.com/question/8836658

#SPJ4

Answer:

Explanation:

vdW radius (nm) ionic radius of X- (nm)

Cl 0.175          0.181

Br 0.185          0.196

I 0.198          0.220

Answer:

It describes the number of atoms in 1 mole of an element.

Explanation:

Avogadro's number is simply a definition of a very large number.  It is called a mole.   It has no physical units.  It simply means 6.02x10^23 of something.  Anything.  Atoms, molecules, paper clips, dollars, school buses, people waiting in line for a concert, etc.  Anything.  Similar words include billion, trillion, quintillion, picometer (look it up) and similar shorthand for very large numbers.  "Santa received 1.8 moles of letters this past year" is an easier way of saying that he received 1,080,000,000,000,000,000,000,000  (or 1.08x10^24) letters.   Publishers didn't like the idea that science books may be cluttered with such nonsense.  And scientists have more fun things to do than wrtite out such long numbers [correctly], so the mole was invented.  It's relationship to the Periodic Table and concept of molar mass is it's true value, but that isn't aksed in this question.

Replication is the process in which n two identical copies of DNA molecules are produced which are exactly the same as the original

It is the most basic step occuring in living organisms.

The opening of the double helix and separation of the DNA strands, priming of the template strand, and construction of the new DNA segment are the three main phases in replication.

The DNA double helix's two strands uncoil at a specific spot known as the origin during separation. Then, a number of proteins and enzymes combine to prime the strands for duplication. Finally, the building of the new DNA strands is organized by a unique enzyme known as DNA polymerase.

To look more about replication click here

brainly.com/question/30035323

#SPJ4

Answer:

a globe

snow rain clouds

The following are the true statements: Period 3 elements have The valence electrons of group 5A The highest principal quantum The valence electrons of group 2A six 2p electrons elements are in the 6s subshell. number of period 2 elements is 2

Valence electrons are placed in the outer most orbit of the atom and that orbit (shell) is called the valence shell. Let‟s take an example to identify them. Write the configuration of Oxygen 8O : 1s2 , 2s2 , 2p4

Oxygen has 6 electrons in its outer most orbit (2+4) that means it has 6 valence electrons and orbit 2 is called the valence shell. Now place these electrons in orbitals of their respective sub-shell.

Oxygen has 6 valence electrons and it needs 2 more electrons to achieve octet. The number of electrons needed to complete octet is termed as the valency of an element. This value can be obtained by subtracting the number of valence electrons from octet (8). So, the valency of Oxygen is 2. That means Oxygen is ready to share its 2 valence electrons or ready to accept 2 more electrons in order to achieve octet.

To know more about valence electrons here

https://brainly.com/question/371590

#SPJ4

The molar mass of potassium nitrate is 101 g. Thus the mass of 0.0237 moles of potassium nitrate is 2.39 grams.

The mass of one mole of a compound is called its molar mass. A compound containing 6.022 × 10²³ atoms is called one mole of the compound.

Mass of potassium = 39 g/mol

mass of nitrogen = 14 g/mol

mass of oxygen = 16 g/mol

mass of 3 O = 48 g

molar mass of KNO₃ = 48 + 39 + 14 = 101 g/mol

The mass of one mole of KNO₃ is 101 g. Then mass of 0.0237 mole is:

0.0237 × 101 = 2.39 g.

Therefore, the mass of 0.0237 moles of potassium nitrate is 2.39 g.

Find more on molar mass:

https://brainly.com/question/12127540

#SPJ1

The limiting reactant if 4. 0 g of nh3 react with 8. 0 g of oxygen is Oxygen because  it produces only 0. 20 mol of NO. the option A is correct.

The reactant that is present in a chemical reaction at a lower concentration than the other reactant and determines the production of the product is known as the limiting reactant.

Ammonia dissociation's balanced equation is:

4NH₃ +5O₂⇒ 4NO +6H₂O

To react with 5 moles of oxygen, 4 moles of ammonia are needed.

The moles are listed as:

moles = mass/ mass molar

The available moles of ammonia in 4 gram is:

moles NH₃ = 4 /17 = 0.23 moles

moles oxygen = 8 / 16 = 0.25 moles

The moles of oxygen required for 0.23 moles of ammonia are:

5/4 x 0.23 = 0.28 moles

The amount of oxygen that is needed is 0.28 mol, yet there are only 0.25 mol of oxygen that are readily available. So, the limiting reagent is oxygen.

Therefore, choice A is right.

Learn more about limiting reagent at https://brainly.com/question/11848702

#SPJ4

According to the activity series , the chemical equation which is correct or chemical reaction  which will most likely take place  is Li + ZnCO₃ as Li is more reactive than zinc and it will displace Zn from   ZnCO₃.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

18.25 mL of a 2.63 M solution you need to dilute to 100 mL with a final solution concentration of 0.48.

The amount of a substance is often measured by how much it weighs – i.e. in g or mg or kg etc. The concentration is the amount divided by the volume it is dissolved in. concentration = amount divided by volume

Another way of representing the amount of a substance is to use the concept of mole. A mole is simply 6.0223 x 1023 molecules (this is “Avogadro’s number”)

Eggs come in dozens (12), molecules come in moles (6 x 1023) The mass of a mole of molecules is the formula weight in grams. This is sometimes called “molar mass” with symbol M. Sometimes it is referred to as molecular weight. Sometimes it is called “relative molecular mass” since the mass of a carbon element is designated to be 12 and other molecules or elements are given masses relative to that.

The molar mass of a small molecule such as an amino acid (eg glycine is NH2CH2COOH and has molecular mass = 75.07 g.mol-1) is much less than the molar mass of a protein (eg haemoglobin has molecular mass ~ 64500 g.mol-1).

To know more about solution here

https://brainly.com/question/17206790

#SPJ4

The approximate bonding order of At and O can be predicted using the Lewis structure of Ato3

Lewis structure, also known as electron-dot framework, is a physical formula in which dots serve as placeholders for electrons; two dots across two atoms signify a covalent link. Gilbert Newton Lewis, the man behind its 1916 introduction, gave it its name.

The Lewis structure of water, or H2O, is shown here as an example. The atom's core electrons are represented by each symbol, along with the nucleus. A hydrogen atom's nucleus is represented by each "H" in this diagram, and an oxygen atom's nucleus and two core electrons are represented by each "O". The valence electrons in the dots are not in bonds.

To know more about Lewis structure visit:

https://brainly.com/question/20300458

#SPJ4