Answer:
the amount of a substance that will dissolve in a given amount of solvent.
Explanation:
Solubility is a term used to describe how readily a substance can be dissolved in a solvent to form a solution. Thus, a substance is said to be soluble if it dissolves completely in a solvent and insoluble if it doesn't dissolve or only dissolves partially.
For example, sodium chloride (NaCl) when mixed with water dissociates into sodium and chloride ions. Thus, salt (sodium chloride) is said to be soluble because it dissolves completely in water.
Furthermore, a compound that dissolves completely in water to produce an aqueous solution is said to be soluble in water.
In conclusion, solubility is simply the amount of a substance such as salt, that will dissolve in a given amount of solvent. A solvent is any liquid such as water, coffee, tea, etc., that dissolves a liquid, gaseous, or solid solute to produce a solution.
How many liters of hydrogen gas are required to react with 3.5" liters of oxygen gas in the following reaction? 2H2(g)+O2(g) -->2H2O(g)
Answer:
7 L of H₂.
Explanation:
The balanced equation for the reaction is given below:
2H₂ + O₂ —> 2H₂O
From the balanced equation above,
1 L of O₂ required 2 L of H₂.
Finally, we shall determine the volume of H₂ required to react with 3.5 L of O₂. This can be obtained as follow:
From the balanced equation above,
1 L of O₂ required 2 L of H₂.
Therefore, 3.5 L of O₂ will require
= 3.5 × 2 = 7 L of H₂.
Thus, 7 L of H₂ is required to for the reaction.
During seafloor spreading, what kind of new earth forms?
Answer:
This bubbled-up magma is cooled by frigid seawater to form igneous rock. This rock (basalt) becomes a new part of Earth's crust. Seafloor spreading occurs along mid-ocean ridges—large mountain ranges rising from the ocean floor.
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
PLZZZZZZZZ HELPPPPPP
Answer:
482
Explanation:
Write a formula for the ionic compound that forms from magnesium
and oxygen.
Answer:
MgO
Explanation:
Humans depend on water from various sources for different reasons. All of these sources are polluted or could be polluted to some extent. Of the following sources, which should humans be most concerned about: lakes, rivers and streams, ocean or groundwater? Explain. answer it no link please anser it a soon as possible pleaseeeeee answer it pleaseee :)
Explanation:
Earth is known as the "Blue Planet" because 71 percent of the Earth's surface is covered with water. Water also exists below land surface and as water vapor in the air. Water is a finite source. The bottled water that is consumed today might possibly be the same water that once trickled down the back of a wooly mammoth. The Earth is a closed system, meaning that very little matter, including water, ever leaves or enters the atmosphere; the water that was here billions of years ago is still here now. But, the Earth cleans and replenishes the water supply through the hydrologic cycle.
please mark as brainliest
A student measures her computer keyboard with a meter stick and finds that it has a width of 47.35 cm. Which statement about this measurement is true?
PLZZZZ HELP
A.) All the numbers are certain
B.) The 4 is uncertain
C.) The 5 is somewhat uncertain
D.) The 5 is certain
Which of the following ions is formed when an acid is dissolved in a solution? (5 points) H+
O−
OH−
SO42+
Answer:
Hence, option B is correct. 1 and 2
Explanation:
NH 4 Cl is a weak base-strong acid salt.
NaCN is a salt of a strong base (NaOH) and weak acid (HCN).In water,
1. NH 4 Cl produces acidic solution
2. KHSO 4 produces acidic solution
because the neutral salt of strong base KOH and strong acid H 2 SO 4 is K 2 SO 4
3. NaCN produces basic solution
4. KNO
3 produces neutral solution
I think this is right but I hope its help ,ur welcome ♥️♥️
Answer:
H+
Explanation:
I took the test :)
Unknown A melts at 113- 114oC. Known compounds 3-Nitroaniline and 4-Nitrophenol both melt at 112-114 oC. If A is mixed with 3-Nitroaniline and the melting point becomes broad and depressed, what must A be __________A) 3-Nitroaniline B) 4-Nitrophenol C) Both
Answer:
C) Both
Explanation:
Whenever we mix any pure form of a compound with some other form of a compound which is not in the other standard pure state, this results in the melting point of mixture to get dispersed and it becomes broad form.
Thus, when a known compound of 3-Nitroaniline mixes with both 3-Nitroaniline and 4-Nitrophenol, the melting point of the compound becomes depressed and board.
Thus the correct option is (C).
Using a mole ratio, find the moles of Cu. You have been given the following
balanced chemical equation, and you have 1.5 moles of Al to start.*
2AI
+
3Cu(SO4)
3Cu
+
Al2(SO4)3n
n 1.5 moles
Answer: 2,25 mol
Explanation: 2Al + 3CuSO4 → Al2(SO4)3 + 3Cu
1,5 mol (1,5*3)/2 mol = 2,25 mol
HELP PLZ SND THANKS WILL MARK YOU AS BRAINLIEST
Answer:
See explanation
Explanation:
For the first question, we can see that the pressure is constant so we apply Charles law;
V1/T1 =V2/T2
V1T2 = V2T1
V1= 4.5 L
T1= 27 + 273 = 300 K
V2= ?
T2= 127 + 273 = 400 K
V2= V1T2/T1
V2= 4.5 × 400/300
V2= 6L
For question 2, Charles law is also used;
V1/T1 =V2/T2
V1T2 = V2T1
T1= 338 K
V1= 0.480 L
T2= ?
V2= 9.2 L
T2= V2T1/V1
T2= 9.2 × 338/0.480
T2= 6478.3 K
A student measured the maximum mass of salt that can dissolve in 100 mL of water at five different temperatures.
Which variable should go on the y-axis?
the volume of water
the temperature of water
the mass of salt
the mass of water
Answer:
the mass of salt
Explanation:
In an experiment, we have an independent variable and dependent variable. The independent variable is the variable that is manipulated to cause changes in other variable while the dependent variable is the variable that responds to the changes made to the independent variable and is measured.
In this case of experiment, the mass of the salt is the DEPENDENT VARIABLE while the different temperatures is the INDEPENDENT VARIABLE. In a graphical representation, the independent variable is always plotted on the x-axis or horizontal axis while the dependent variable is always plotted on the y-axis or vertical axis.
Since the dependent variable is the mass of the salt, it should be plotted on the y axis.
Answer:
The temperature of water
Explanation:
I took the test
In the periodic table,
have common properties,
periods
both groups and periods
neither groups nor periods
groups
Answer:
both groups and periods
Answer:
groups
Explanation:
Elements in the same group have similar chemical properties because they have the same number of outer electrons and the same valency
Which one of the following statements concerning vitamin B12 is correct?
A\ it is present in plant products.
B\ its deficiency is most often caused by a lack of the vitamin in the diet.
C\ it requires a specific glycoprotein for its absorption.
D\ it is involved in the transfer of amino groups.
E\ the cofactor from is vitamin B12 itself.
Answer:
C it requires a specific glycoprotein for its absorption.
Out of the following statements concerning vitamin B12 the only statement which is correct- it requires a specific glycoprotein for its absorption.
Let's study some facts about vitamin B12:
Vitamin B12 is an essential vitamin found in foods such as meat, fish, and dairy. It requires a specific glycoprotein for its absorption. The body absorbs vitamin B12 from food in a two-step process.⇒First, hydrochloric acid in the stomach separates vitamin B12 from the protein that it's attached to.
⇒Second, the freed vitamin B12 then combines with a protein made by the stomach, called intrinsic factor, and the body absorbs them together.
Deficiency of Vitamin B12 leads to weakness and fatigue.Transport of B12 in extracellular fluids is dependent on three homologous carrier proteins:⇒intrinsic factor, transcobalamin (also known as transcobalamin II), and haptocorrin (also known as the R-protein or transcobalamin I).
Learn more:
brainly.com/question/9587963
What is nitrogen???? explain!!!
Answer:
It is a colourless, odourless, tasteless gas that is the most plentiful element in Earth's atmosphere and is a constituent of all living matter.
Explanation:
Have a nice day :D
Answer:
Nitrogen is a gas
Explanation:
Hukkam aap bio image dekhona please and bataona ki kese lage
Reaction or ionic equation for CuSO4(aq)+CaCO3(aq)
Answer:
CuCo3+CaSo4
Explanation:
when they react they form that compound in the reaction called double displacement.
Which atom has the electron configuration 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d²? and 1s²2s²2p⁶3s²3p⁶3d⁷4s²?
10. What is the mass of SO3 when -8753 kJ of energy are used according
to the following equation?2S + 302 - 2003 AH = -791.4kJ Is this
Endothermic or Exothermic -8735kJ x mols03/kJ x gSO3/
molSO3
Answer:
Exothermic
1771 g
Explanation:
Step 1: Write the balanced thermochemical equation
2 S(s) + 3 O₂(g) ⇒ 2 SO₃(g) ΔH° = -791.4 kJ
Since ΔH° < 0, the reaction is exothermic.
Step 2: Calculate the moles of SO₃ produced when 8753 kJ of energy are released
According to the thermochemical equation, -791.4 kJ are released every 2 moles of SO₃ that are formed.
-8753 kJ × 2 mol/(-791.4 kJ) = 22.12 mol
Step 3: Calculate the mass corresponding to 22.12 moles of SO₃
The molar mass of SO₃ is 80.06 g/mol.
22.12 mol × 80.06 g/mol = 1771 g
A solution is formed by dissolving 83.2 grams of copper II chloride (CuCl2) in 2.5 liters of water. The molar mass of CuCl2 is 134.45 g/mol.
What is the molarity of the solution?
Explanation:
the answer is in the above image
A student swings back and forth from position A to C, as shown.
Which of the following happens when the swing moves from Position C to Position B?
A. Both potential energy and kinetic energy of the student increase.
B. Both potential energy and kinetic energy of the student decrease.
C. Potential energy of the student decreases and kinetic energy of the student increases.
D. Kinetic energy of the student decreases and potential energy of the student increases.
Answer:
C
Explanation:
KE at B is max and PE is 0
KE at C is 0 and PE is max
so when student swings from C to B
its KE increases
and PE decreases
Identical wire loops are dipped into Liquid X and Liquid Y, so that a film of liquid forms across the loops (like the bubble solution on a child's bubble blowing wand). The width of each loop is increased slowly and the forces FX and FY needed to make the loops 5% wider are measured.
a. FX will be greater than F Y
b. FX will be less than FY
c. FX will be equal to FY
d. It's impossible to predict whether F X or FY will be greater without more information.
Answer:
a.
Explanation:
Assuming that Liquid X is considered to possess a greater viscosity as well as higher surface tension than liquid Y. Then, liquid X will tend to harbour more pressure inside the liquid.
In addition to that, the greater the surface tension, the greater the force required to expand the liquid's surface area.
This in turn makes the force required to make the loop 5% wider to be greater in FX rather than FY.
Thus, option a is the correct answer.
when nitric acid touches your skin a yellow spot develops what does the spot mean
Stomach acid is approximately 0.10 M HCl. How many mL of stomach acid can be neutralized by one regular antacid tablet that contains 500 mg of solid CaCO3 (100.09 g/mol)?
Answer:
100 mL
Explanation:
The reaction that takes place is:
CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂First we convert 500 mg of CaCO₃ into mmoles, using its molar mass:
500 mg ÷ 100 mg/mmol = 5 mmol CaCO₃Then we convert 5 mmoles of CaCO₃ into HCl mmoles, using the stoichiometric coefficients of the balanced reaction:
5 mmol CaCO₃ * [tex]\frac{2mmolHCl}{1mmolCaCO_3}[/tex] = 10 mmol HClFinally we calculate the volume of a 0.10 M HCl solution (such as stomach acid) that would contain 10 mmoles:
10 mmol / 0.10 M = 100 mLCalculate the energy in kj/mol of photon in red light of wavelength 656nm
Answer:
you don't know the answer?ha me too
Which of the following could not act as a medium for a mechanical wave?
a) air
b) empty space
c) liquid water
d) a solid rope
Answer:
b) empty space
Explanation:
A mechanical cannot travel through empty space. So option (b) is correct.
A mechanical wave is a wave which needs a material medium for its propagation. For example sound, water waves etc . The medium required by the wave can be a solid, liquid or a gas. Empty space doesn't have any medium, so a mechanical wave cannot travel through empty space.
A range of organic molecules can undergo combustion. If pyridine
Answer:
A range of organic molecules can undergo combustion. Pyridine (C5H5 combustion in the unbalanced reaction shown below wtar o 4 CsH5N + O2 +H2O + CO2 + NO a) Write the balanced equation. (2 points) # 41 CH N +170 70 the flow, t- b) Find the percent yield for the reaction if 10.0 g of pyridine dioxide. (2 points)
Explanation:
hope this helps!
Explain why the following is an incorrect IUPAC name. 1,3-Dimethylbutane
a. The longest chain is chosen incorrectly.
b. The name of substituent is given incorrectly.
c. The longest chain is numbered incorrectly.
d. Substituents are not listed in alphabetical order.
Answer:
a. The longest chain is chosen incorrectly.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to firstly draw the structural formula of the 1,3-Dimethylbutane:
[tex]CH_3-CH_2-CH(CH3)-CH_2-CH_3[/tex]
Thus, we can see that the correct name should be 3-methylpentane since the longest chain was chosen incorrectly, as it must have five carbon atoms.
Regards!
Cellular respiration results in a
Answer:
A form of energy that can be used by cells.
Explanation:
What are the TWO characteristics of an effective collision?
Answer:
the TWO characteristics of an effective collision are:
1.Molecules collide with sufficient energy
2.Molecules collide with the proper orientation.
How many moles of water are produced if 3.30 moles of N20 is
produced? NH4NO3 --> N20 + 2 H2O (mole to mole conversion) 1 step
Answer:
The netto reaction equation is:
2 OH- + 2H+ = 2 H2O
So the answer is 2 moles.
What are the main modifications of John Dalton's atomic theory