We would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
What is liquid?One of the four main states of matter is liquid, the others who were solid, gas, and plasma. A liquid is a form of fluid. In contrast to a solid, those molecules found in a liquid possess significantly more flexibility to move.
The forces that hold molecules together within a solid are really only transient in a liquid, permitting it to flow while still being a solid. We would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
Therefore, we would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
To know more about liquid, here:
https://brainly.com/question/20922015
#SPJ9
Your question is incomplete but most probably your full question was,
Describe how you could use the liquid's physical and chemical properties to determine what liquid it might be? solubility, melting point, boiling point
Why were the crucible heated before the hydrate was added?
The crucible heated before the hydrate was added is to remove the moisture.
What is crucible and its uses?
Crucible is a type of container that is used to heat substances to very high temperatures. It is typically made of a heat-resistant material such as porcelain, metal, or graphite. It is used in a variety of laboratory and industrial processes such as metal smelting, distillation, and synthesis. Crucibles are often used to separate components of a sample by melting them away from the sample and then cooling the remained material for further analysis.
Heating the crucible before adding the hydrate serves two purposes. First, it ensures that any residual moisture in the crucible is removed. Second, heating the crucible helps to ensure that the hydrate is completely dehydrated. The crucible is typically heated before adding a hydrate because hydrates are compounds that contain water molecules, which can be chemically bound to the other components of the compound. When the hydrate is heated, the water molecules can be driven off through a process called dehydration, leaving behind the anhydrous compound.
Therefore, in order to remove the moisture the is crucible heated.
To learn more about crucible from the link
https://brainly.com/question/14904896
#SPJ4
how to convert moles to atoms calculator?
By using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
What is atom?The smallest unit of matter that may be divided without producing electrically charged particles is the atom. It is also the smallest piece of substance with chemical element-like characteristics. As a result, the atom serves as the fundamental unit of chemistry.
Space makes up the majority of an atom. The rest is made up of an accumulation of electrons that are negatively charged surrounding a nucleus with a positive charge made up of protons and neutrons. Compared to electrons, whose happen to be the lightest charged substances in nature, the nucleus relatively small and dense. By using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
Therefore, by using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
To know more about atom, here:
https://brainly.com/question/29712157
#SPJ2
how many ions would you expect mgbr2 to break down into in water?
Number of ions which I would expect on breaking of MgBr₂ in water is 3.Ions can be positive or negative.
An ion is an atom or particle with a net electrical charge.The charge of an electron is viewed as negative by show and this charge is equivalent and inverse to the charge of a proton, which is viewed as certain by show. The net charge of a particle isn't zero on the grounds that its absolute number of electrons is inconsistent to its all out number of protons.
A cation is a decidedly accused particle of less electrons than protons while an anion is an adversely accused particle of additional electrons than protons. Inverse electric charges are pulled towards each other by electrostatic power, so cations and anions draw in one another and promptly structure ionic mixtures.
MgBr₂ is a compound that separates into its ions in water. the Br-particles don't remain together in water so you get 2 Br-particles Br₂ without help from anyone else is possibly composed when you are alluding to bromine as a diatomic component, not as particles in arrangement
To know more about ions,visit here:
https://brainly.com/question/3110170
#SPJ4
Which of these equations represents the second ionization of magnesium?
A Mg+(g) → Mg2+(g) + e−
B Mg(g) → Mg2+(g) + 2e−
C Mg+(g) + e− → Mg2+(g)
D Mg(g) + 2e− → Mg2+(g)
The equation that represents the second ionization of magnesium is option D: Mg(g) + 2e- → Mg2+(g).
In the first ionization of magnesium, one electron is removed from the neutral magnesium atom to form a magnesium cation, Mg+. In the second ionization, another electron is removed from the magnesium cation to form a magnesium dication, Mg2+. The equation for this process is D, Mg(g) + 2e- → Mg2+(g).
Option A, Mg+(g) → Mg2+(g) + e-, represents the formation of a magnesium cation from a magnesium dication and an electron, which is the reverse process of the second ionization.
Option B, Mg(g) → Mg2+(g) + 2e-, represents the formation of a magnesium dication from a neutral magnesium atom, which is the correct process for the second ionization.
Option C, Mg+(g) + e- → Mg2+(g), represents the formation of a magnesium dication from a magnesium cation and an electron, which is not a second ionization.
Read more about Ionization:
https://brainly.com/question/5880605
#SPJ4
draw the structure of the organic product formed from the reaction of sodium methoxide with 1‑chloro‑4‑nitrobenzene. be sure to show formal charges.
The reaction of sodium methoxide with 1‑chloro‑4‑nitrobenzene produces, 1-methoxi-4-nitrobenzene.
The step 1 involves a nucleophylic attack to the atom of carbon that has the best outgoing group. In this case, Chlorine is better than NO2, so, it will goes there.
It cannot go SN2, so instead of leaving the Cl, one of the double bond goes back, leaving a negative charge under that carbon. In this step, which is very slow, undergoes a resonance structure to best locate the negative charge. This is well distribuited in the whole aromatic ring.
The second step, once the negative charge is distributed, the Chlorine leaves the molecule and form the new product.
To know more about the sodium methoxide, here
brainly.com/question/17206908
#SPJ4
What allows us to convert from moles of one substance to moles of another substance? a) Formula mass b) Molecular mass c) A balanced chemical equation d) A conversion table
The moles of any two substances involved in a chemical reaction are connected by a conversion factor called a mole ratio. The numbers in a conversion factor are provided by the coefficients of the balanced chemical equation.
What is Molecular mass?A given molecule's mass, expressed in daltons, is known as its molecular mass. Because various isotopes of an element are present in distinct molecules of the same substance, their molecular weights might vary. The mass of 6.022 10 23 atoms, molecules, or formula units of a substance are equal to its molar mass, which is the mass of 1 mole of that substance represented in grams per mole. A unit used to describe the masses of individual atoms and molecules is the atomic mass unit (u). The weighted average of the masses of an element's isotopes, or atomic mass, is calculated. The combined masses of a molecule's atoms make up its molecular mass.To learn more about Molecular mass, refer to:
https://brainly.com/question/837939
#SPJ4
Hydrogen and oxygen react under a specific set o conditions to produce water according to the following: 2H2(8) + 02(8) -> 2H20(8).
a. How many moles of hydrogen would be required to produce 5.0 mol of water?
b. How many moles of oxvgen would be required?
Answer:
a. To produce 5.0 mol of water, we need to know the number of moles of hydrogen involved in the reaction. The chemical equation 2H2(g) + O2(g) -> 2H2O(g) tells us that 2 moles of hydrogen react with 1 mole of oxygen to produce 2 moles of water. So, to produce 5.0 mol of water, we need 2.5 moles of hydrogen.
b. If we know the number of moles of hydrogen, we can calculate the number of moles of oxygen required for the reaction. The chemical equation tells us that 2 moles of hydrogen react with 1 mole of oxygen, so if we have 2.5 moles of hydrogen, we would need 1.25 moles of oxygen.
Question:
What is the molar mass of H3 PO4?
H3 PO4:
H3 PO4 is hydrogen phosphate if it is a solid. If it is dissolved in water, it becomes an acid with the name phosphoric acid. Any compound that produces hydrogen ions in solution is an acid.
The molar mass of hydrogen phosphate molecule, H₃PO₄ also known as phosphoric acid is equals to the ninety-eight grams per mole.
We have a hydrogen phosphate molecule, H₃PO₄. It is consists of three hydrogen atom, Phosphorous atom and four oxygen atoms. Molar mass is the sum of the masses of all the individual atoms within their quantities present in a molecule or compound. Phosphoric acid is the important acid of oxygen and phosphorous. It is used to make phosphate salts for fertilizers. The molecular formula of phosphoric acid is written as H₃PO₄.
Atomic mass of Oxygen atom, O
= 16 g/mol.
Atomic mass of hydrogen atom, H
= 1 g/mol.
Atomic mass of Phosphorous atom, P
= 31 g/mol.
Molar mass of hydrogen phosphate, H₃PO₄ = 3 ×( H ) + 1× (P) + 4 (O)
= ( 1 g/mol x 3 ) + ( 31 g/mol x 1 ) + ( 16 g/mol x 4 )
= (3 + 31 + 64) g/mol
= 98 g/mol.
Hence, molar mass of hydrogen phosphate H₃PO₄ is 98 g/mol.
For more information about molar mass, visit :
https://brainly.com/question/837939
#SPJ4
what contribution did john dalton make to atomic theory?
Dalton's contribution in his atomic theory focused on the suggestion that all matter was comprised of indivisible and indestructible atoms with distinct masses and properties.
Dalton's atomic theory suggested that all type of matter was comprised of indivisible and indestructible atoms which have distinct masses and properties, the combination of which determined the physical nature of their constituent elements.
More importantly, Dalton assigned atomic weights to the atoms of the 20 elements which were known at that time. This was a revolutionary concept for the day, which would contribute to the development of the periodic table of the elements later in the 19th century.
Learn more about Dalton's atomic theory from the link given below.
https://brainly.com/question/28870196
#SPJ4
ultraviolet, visible, and infrared light are all examples of _____ radiation, which has the properties of both particles and ______.
ultraviolet, visible, and infrared light are all examples of electromagnetic radiation, which has the properties of both particles and waves.
What is infrared light?
Infrared light is a type of electromagnetic radiation that has a longer wavelength than visible light. It is invisible to the human eye, but can be detected by special cameras and sensors. It is used in many applications, including night vision, thermal imaging, and remote control.
Therefore, ultraviolet, visible, and infrared light are all examples of electromagnetic radiation, which has the properties of both particles and waves.
To learn more about infrared light
Here: https://brainly.com/question/30551457
#SPJ4
When white light strikes this object, the light is completely absorbed, with none of it transmitted or reflected. Which type of object
could this be? (1 point)
O a black piece of paper
O a white sheet of plastic
O a green long-sleeved shirt
O a clear windowpane
The type of object that completely absorbs white light would be a black piece of paper. First option.
What are black bodies?Black bodies are objects that completely absorb all the components of white light.
White light is a mixture of different colors of light, each with a different wavelength and frequency.
When white light strikes a black body, the black body absorbs a large fraction of all the different colors, regardless of their wavelength. This absorption causes the light to be transformed into thermal energy, which increases the temperature of the black body.
More on black bodies can be found here: https://brainly.com/question/28271975
#SPJ1
Is KOH an acid or base in water?
KOH is a base in water.
When KOH dissolves in water, it produces hydroxide ions (OH-) which makes the solution basic. The chemical equation for this reaction is: KOH (s) → K+ (aq) + OH- (aq)
The presence of the hydroxide ions is what makes the solution basic. In contrast, an acid would produce hydrogen ions (H+) when dissolved in water. So, KOH is a base in water.
The inorganic compound potassium hydroxide is identified by the chemical symbol KOH. Other names for potassium hydroxide include caustic potash, lye, and potash lye. This alkali metal hydroxide has great base strength. Potassium hydroxide emerges as a transparent solution in its aqueous form.
To know more about potassium hydroxide here:
https://brainly.com/question/21904397#
#SPJ11
how to write lewis structure for ccl4?
The lewis structure of the CCl₄ is as :
. .
: Cl :
|
: Cl : - C - : Cl :
°° | °°
..
: Cl :
The Lewis structure of the Carbon Tetra Chloride CCl₄ the four chlorine atoms are the positioned symmetrically as the corners in the tetrahedral configuration that joined to the central carbon atom by the single covalent bonds. This is Because of this symmetrical geometry, the CCl₄ is the non-polar. The lewis structure is also known as the electron dot structure.
The total number of the valence electrons are 24 electrons in the carbon tetra chloride.
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
are there any places on earth where the mid-oceanic ridges meet the continent?
Answer:
Yes, there are places on earth where mid-oceanic ridges meet the continents. These areas are known as "continental rift zones" or "divergent plate boundaries," and they occur where tectonic plates are pulling away from each other, causing a rift or a valley to form. As the continental crust thins and stretches, it may be separated by a mid-oceanic ridge or a seafloor spreading center.
One example of a place where a mid-oceanic ridge meets a continent is the East African Rift. This is a divergent boundary where the African Plate is splitting into two parts, and a new ocean is beginning to form. The rift runs through several countries in eastern Africa, including Ethiopia, Kenya, Tanzania, and Mozambique. Another example is the Red Sea, which is a young ocean that formed as the Arabian Plate separated from the African Plate along a divergent boundary.
So, in summary, there are several places on earth where the mid-oceanic ridges meet the continents, forming rift zones or divergent plate boundaries.
Barium metal was quantitatively precipitated from a 1.52 g sample of BaCl2â2H2O. The mass of the barium that was collected was 0.844 g. Calculate the experimental mass percent of barium in the sample.Calculate the theoretical mass percent of barium in BaCl2â2H2O.
This same sample's experimental mass percentage containing barium is 55.526.
What does barium do to the body?Barium compounds which dissolved in water or the stomach when consumed in very large quantities might cause human paralysis or heart rhythm abnormalities. Some people who consumed or drank a significant amount of barium but failed to seek medical attention immediately perished.
Given that a 1.52 g sample of BaCl22H2O quantitatively precipitated barium metal.
This barium that was gathered had a mass of 0.844 g.
We must ascertain the sample's experiment mass percent of barium
Let the barium content be expressed as x/100.
x/100×1.52=0.844
0.0152x=0.844
x=55.526
To know more about barium visit:
brainly.com/question/2572464
#SPJ4
what structures are formed when water molecules surround ions
Hydration spheres structures are formed when water molecules surround ions. A chemical structure known as the hydration sphere, a type of solvation shell, surrounds a solute in a solution in which the solvent is water.
Two hydrogen atoms that are individually connected to an oxygen atom by a single chemical bond make up the water molecule. The nucleus of the majority of hydrogen atoms is made up solely of a proton. Water contains minor amounts of the two isotopic isotopes deuterium and tritium, whose atomic nuclei also have one and two neutrons, respectively. In some nuclear reactors, deuterium oxide (D2O), often known as heavy water, is employed as a neutron moderator and is crucial for chemical research. See an experiment that demonstrates the difference in the freezing points of freshwater and seawater. See an experiment that demonstrates the difference in the freezing points of freshwater and seawater. all videos related to this post Water has many complicated chemical and physical properties, despite having a seemingly straightforward chemical formula (H2O).
To learn more about water molecules visit;
https://brainly.com/question/22298555
#SPJ4
how many molecules of water are needed to completely hydrolyze a polymer that is ten monomers long?
Nine, with each coupled pair of monomers requiring the hydrolysis of one water.
What is meant by hydrolyze?In general, hydrolysis refers to the breaking of chemical bonds brought about by the presence of water and entails the reaction of an organic compound with water to produce two or more new chemicals.Any chemical reaction in which a water molecule breaks one or more chemical bonds is referred to as hydrolysis. The phrase is commonly used to refer to substitution, elimination, and solvation reactions in which water serves as the nucleophile. Using water to break down a binding is known as hydrolysis.The word "hydrolyze" comes from the Greek words hydro and lysis, which mean "water break." Water (or H2O) separates into two components: a positive hydrogen atom, H+, and a negative hydroxide atom, (OH)-. The word "hydrolysis" literally means "water reaction."To learn more about hydrolyze refer to:
https://brainly.com/question/30468294
#SPJ4
of the halogen family, fluorine, chlorine, bromine, and iodine, which would you expect not to produce a positive beilstein test result?
The Beilstein test is a test for halogens, which identifies the presence of halogens in an organic compound. The test is based on the observation that halogen atoms produce a green flame when a compound containing halogens is introduced into a flame.
Of the halogens in the halogen family (fluorine, chlorine, bromine, and iodine), fluorine is the halogen that would not produce a positive Beilstein test result. This is because fluorine is so reactive that it will react with the copper wire used in the test, preventing the green flame from being produced. In contrast, chlorine, bromine, and iodine will react with the copper wire to produce a green flame, indicating the presence of halogens in the compound being tested.
Find more about Beilstein test
brainly.com/question/1417650
#SPJ4
there are several aromatic compounds with the formula c8h9cl. draw those that have a disubstituted ring where the chlorine is attached to the ring.
The three aromatic compounds, o-chloromethyltoluene, m-chloromethyltoluene, p-chloromethyltoluene for C₈H₉Cl are drawn.
Ortho (same side) means a 1,2 relationship between two aromatic substituents, meta means 1,3, and para (opposite sides) means 1,4.
A default aromatic ring is benzene,C₆H₆, so consider C₆H₄ by default for a disubstituted aromatic ring without substituents and go from there. With two carbons and 5 hydrogens available, and the chlorine not directly on the ring.
We can have −CH₂Cl as one substituent and CH₃ as the other. This accounts for the remaining C₂H₅ in the formula.
We can move one of substituents around for the isomers.
To know more about the aromatic compounds, here
brainly.com/question/1351407
#SPJ4
What is a polyatomic ion definition?
Find the volume, in liters of 8.00 g O₂ at STP?
Answer: V = 5.60 L
Explanation:
At STP (standard temperature and pressure) are the following values.
T = 273K of 0°C
P = 1.00 atm
R is the gas constant.
R = 0.08206 L atm/K mol
To find the volume in liters we will use PV = nRT.
Step 1: Convert 8.00 g O₂ to moles O₂.
8.00 g O₂ x (1 mol O₂/32.00 g O₂) = 0.250 mol O₂
Step 2: Rearrange PV = nRT to isolate V.
V = nRT/P
Step 3: Insert the known values into the equation and solve for V.
V = [(0.250 mol O₂) x (0.08206 L atm/ K mol) x 273K] / 1.00 atm
V = 5.60 L
Note that all units cancel except for L.
What is the Lewis structure of HNO2?
The central N atom in the HNO₂ Lewis structure is sp² hybridized.
The hybridization of N is calculated by the following formula,
H = 0.5(V+M-C+A), where H= hybridization value, V is the number of valence electrons in the central atom, M = monovalent atoms surrounded, C=no. of cation, A=no. of the anion.
H is an s block element with the valence orbital of s and the electronic configuration 1s1. The s block element should fill its s orbital by two electrons in accordance with the octet rule because the s orbital can only hold a maximum of two electrons according to Hund's rule of multiplicity.
To create a strong covalent bond, H and O each share one electron. Now that a bond has been shared, H has two electrons in its valence orbital, completing its octet.
Given that the s orbital only has two electrons and the p orbital has a maximum capacity of six electrons due to its three subshells, the p block element's valence shell should be completed by six electrons.
know more about Lewis structure click here;
https://brainly.com/question/4144781
#SPJ4
What is the empirical formula of C4H8O2
Answer:
Explanation:
The empirical formula of a compound is the simplest whole-number ratio of the atoms that make up the compound. To find the empirical formula of a compound, you first need to determine the number of atoms of each element in the compound.
For C4H8O2, there are 4 carbon atoms, 8 hydrogen atoms, and 2 oxygen atoms. To simplify the ratio to its simplest form, divide each of these numbers by the greatest common factor, which is 2 in this case. The empirical formula is then:
C4H8O2 ÷ 2 = C2H4O1
So the empirical formula of C4H8O2 is C2H4O1.
a chemical equation is a statement using chemical that expresses both the identities and the relative of the reactants and products involved in a chemical or physical change.
A chemical equation is a statement using chemical formulas that express both the identities and the relative quantity of the reactants and products involved in a chemical or physical change.
The chemical equation is said to be balanced if there are no inequalities.
The relative quantity is generally an absolute quantity divided by some other quantity. For example, in the previous excel file, one could calculate the percent of the adult population infected with HIV by dividing the number of adults with HIV by the total adult population of the country.
The main four types of reactions are direct combination, analysis reaction, single displacement, and double displacement.
Learn more about chemical equation here brainly.com/question/28294176
#SPJ4
what property of water cause water to form a curved shape on the penny?
The property of water that causes it to form a curved shape on a penny is surface tension.
Surface tension is the cohesive force that exists between the water molecules at the surface of the liquid, causing them to stick together and form a "skin" or surface film. This property arises due to the hydrogen bonding between water molecules, which creates a net inward force that reduces the surface area of the liquid, making it behave as if it has an elastic film stretched across it.
When a penny is placed on a flat surface and water droplets are added to it, the surface tension of the water causes it to form a nearly spherical shape on the penny. The cohesive forces of the water molecules pull the liquid into a shape with the least amount of surface area, which is a sphere, and the penny acts as a support that helps maintain the spherical shape of the water droplet. This surface tension phenomenon can be observed in various everyday situations, such as the formation of raindrops or the behavior of soap bubbles.
Learn more about cohesive force
brainly.com/question/9189639
#SPJ4
Given the balanced equation naoh + hcl --> nacl + h2o, what is the total number of grams of h2o produced when 116 g of the product nacl is formed?.
The total number of grams of water produced when 116 g of sodium chloride is formed is 35.58 g.
The balanced chemical equation for the reaction of sodium hydroxide (NaOH) and hydrochloric acid (HCl) to produce sodium chloride (NaCl) and water (H2O) is given as:
NaOH + HCl -> NaCl + H2O
Since the equation is balanced, the ratio of the number of moles of each substance involved in the reaction is also the ratio of their masses. To find the number of grams of water produced, we first need to determine the number of moles of sodium chloride produced. We can use the molar mass of sodium chloride, which is 58.44 g/mol:
116 g NaCl / 58.44 g/mol
=> 1.98 moles NaCl
From the balanced equation, we know that for every mole of sodium chloride produced, one mole of water is also produced.
So, the number of moles of water produced is the same as the number of moles of sodium chloride produced:
1.98 moles H2O
Finally, to find the number of grams of water produced, we multiply the number of moles by the molar mass of water, which is 18.02 g/mol:
1.98 moles H2O * 18.02 g/mol
=> 35.58 g H2O
To learn more about Molar mass :
https://brainly.com/question/372846
#SPJ4
is sodium chloride a heterogeneous mixture
No, sodium chloride is homogeneous mixture. Homogeneous mixtures are those in which the ingredients have been mixed together and are distributed equally throughout the mixture.
To put it another way, "they are consistent throughout." In a homogeneous mixture, there is only one phase of matter that can be observed. Important details about such mixtures include:
No, sodium chloride (NaCl) is not a heterogeneous mixture. Sodium chloride is a chemical compound with a fixed ratio of sodium ions (Na+) to chloride ions (Cl-), and it has a uniform composition throughout the sample. In other words, each particle of sodium chloride contains the same amount of sodium and chloride atoms in a fixed ratio, and there are no distinct regions or phases within the sample. Therefore, sodium chloride is a homogeneous mixture or a pure substance, depending on the context of the question.
It is worth noting that if we dissolve sodium chloride in water, then we get a homogeneous mixture, which is a solution. In this case, the dissolved sodium chloride ions are uniformly distributed throughout the solution, and there are no distinct regions or phases within the sample.
know more about homogeneous mixture click here;
https://brainly.com/question/30587533
#SPJ4
1. How many molecules are in 41 g of aspartame?
2. What is the mass in grams of 6.12 moles of aspartame?
3. How many atoms of nitrogen are in 7.1 mole of aspartame
1. There are 8.39 x 10^22 molecules in 41 g of aspartame.
2. The mass of 6.12 moles of aspartame is 1800.4 g.
3. There are 8.55 x 10^24 nitrogen atoms in 7.1 moles of aspartame.
Number of molecules calculationThe molecular formula of aspartame is C14H18N2O5. The molar mass of aspartame can be calculated as:
= (14 x 12.01) + (18 x 1.01) + (2 x 14.01) + (5 x 16.00)
= 294.30 g/mol
Number of moles of aspartame in 41 g = 41 g / 294.30 g/mol
= 0.1395 mol
Number of molecules = 0.1395 mol x 6.022 x 10^23 molecules/mol
= 8.39 x 10^22 molecules
2. Mass = number of moles x molar mass
Mass = 6.12 moles x 294.30 g/mol
= 1800.4 g
Therefore, the mass of 6.12 moles of aspartame is 1800.4 g.
3. The molecular formula of aspartame contains 2 nitrogen atoms. To calculate the number of nitrogen atoms in 7.1 moles of aspartame:
Number of nitrogen atoms = number of moles x Avogadro's number x number of nitrogen atoms in one molecule
Number of nitrogen atoms in one molecule of aspartame = 2
Number of nitrogen atoms = 7.1 moles x 6.022 x 10^23 molecules/mol x 2 nitrogen atoms/molecule
= 8.55 x 10^24 nitrogen atoms
Therefore, there are 8.55 x 10^24 nitrogen atoms in 7.1 moles of aspartame.
More on number of molecules in substances can be found here: https://brainly.com/question/11815186
#SPJ1
All parts of the question.
The substance which is totally consumed when the chemical reaction is complete is known as the limiting reactant. Here HgO is the limiting reactant.
What is theoretical yield?The amount of the product which is predicted by the stoichiometry is called the theoretical yield. A reaction yield is reported as the percentage of the theoretical amount.
% yield = Actual yield / Theoretical yield × 100
a. 11.50 × 1 mol HgO / 216.6 × 1 mol HgCl₂ / 1 mol HgO × 271.5 g HgCl₂ / 1 mol HgCl₂ = 14.41 g HgCl₂
12.46 g Cl₂ × 1 mol Cl₂ / 70.90 g × 1 mol HgCl₂ / 2 mol Cl₂ × 271.5 g HgCl₂ / 1 mol HgCl₂ = 23.85 g HgCl₂
So HgO is the limiting reactant.
b. 11.50 × 1 mol HgO / 216.6 × 1 mol Cl₂O / 1 mol HgO × 86.90 g Cl₂O / 1 mol Cl₂O = 4.61 g Cl₂O
c. 2.99 / 4.61 × 100 = 64.85 %
d. Moles of Cl₂ available - Moles of Cl₂ required = 0.1757 - 0.01062 = 0.1651 moles.
Thus HgO is the limiting reactant.
To know more about limiting reactant, visit;
https://brainly.com/question/26905271
#SPJ1
How many c4h10 molecules are contained in 9. 213 g of this compound? how many hydrogen atoms?.
The number of C4H10 molecules and hydrogen atoms in 9.213 g of this compound is 9.48 x 10^23. This can be calculated by using the molecular weight and Avogadro's number.
The molecular weight of C4H10 can be calculated as :
4 x 12.01 + 10 x 1.01 = 58.12 g/mol.Dividing the mass of the sample (9.213 g) by the molecular weight gives us the number of moles of C4H10:
9.213 g ÷ 58.12 g/mol = 0.158 moles.Avogadro's number, which is approximately 6.022 x 10^23, can then be used to calculate the number of C4H10 molecules in the sample:
0.158 moles x 6.022 x 10^23 molecules/mol = 9.48 x 10^22 molecules.The number of hydrogen atoms in the sample can be calculated by multiplying the number of C4H10 molecules by the number of hydrogen atoms in each molecule, which is 10:
9.48 x 10^22 molecules x 10 hydrogen atoms/molecule = 9.48 x 10^23 hydrogen atoms.Learn more about Hydrogen Atoms:
https://brainly.com/question/20290989
#SPJ4