We, need to measure 58.3 ml of the 12.0 M stock NaOH solution and dilute it with distilled water to a final volume of 1000 ml to obtain a 0.700 M NaOH solution.
To make 1000 ml of a 0.700 M NaOH solution from a 12.0 M stock NaOH solution, you can use the following formula;
M₁V₁ = M₂V₂
where M₁ is concentration of the stock solution, V₁ is the volume of stock solution needed, M₂ is desired concentration of the new solution, and V₂ is final volume of the new solution.
Substituting the values given in the problem;
M₁ = 12.0 M
M₂ = 0.700 M
V₂ = 1000 ml = 1.0 L
Solving for V₁;
M₁V₁ = M₂V₂
12.0 M × V₁ = 0.700 M × 1.0 L
V₁ = (0.700 M × 1.0 L) / 12.0 M
V₁ = 0.0583 L or 58.3 ml
Therefore, you need to measure 58.3 ml of the 12.0 M stock NaOH solution and dilute it with distilled water to a final volume of 1000 ml to obtain a 0.700 M NaOH solution.
To know more about stock solution here
https://brainly.com/question/28083950
#SPJ4
What happens to an endothermic reaction when temperature is increased?
Heat is a reactant, so the reaction will shift to the right to make more products.
Heat is a product, so the reaction will shift to the right to make more products.
Heat is a reactant, so the reaction will shift to the left to make more reactants.
Heat is a reactant, so the reaction will shift to the right to make more reactants
In an endothermic reaction, heat is absorbed from the surroundings, and it acts as a reactant in the reaction. When the temperature of the system is increased, the equilibrium position of the reaction will shift in order to counteract the temperature change.
According to Le Chatelier's principle, the reaction will shift in the direction that consumes or absorbs heat.
In this case, since heat is a reactant, the reaction will shift to the right in order to consume more heat and restore the equilibrium. By shifting to the right, more products will be formed, as the forward reaction is favored.
This occurs because increasing the temperature adds energy to the system, allowing more reactant particles to possess sufficient energy to overcome the activation energy barrier and form products. Thus, the increased temperature promotes the forward reaction, resulting in an increase in the concentration of products.
Therefore, the correct answer is: Heat is a reactant, so the reaction will shift to the right to make more products.
To learn more about endothermic reaction refer here:
https://brainly.com/question/23184814#
#SPJ11
which pair of substances is capable of forming a buffer in aqueous solution?20)a)h3po4, na3po3b)hno3, nano3c)h2co3, nano2d)ch3cooh, ch3coonae)hcl, nacl
The pair of substances capable of forming a buffer in an aqueous solution is option D) CH³COOH, CH³COONa.
A buffer solution is one that resists significant changes in pH when small amounts of an acid or a base are added. To form a buffer, you need a weak acid and its conjugate base or a weak base and its conjugate acid. In option D, CH³COOH (acetic acid) is a weak acid, and CH³COONa (sodium acetate) is its conjugate base. When these two substances are mixed in an aqueous solution, they can react with added acids or bases to maintain a relatively constant pH.
Acetic acid can donate a proton (H+) to neutralize added base, while sodium acetate can accept a proton to neutralize added acid. The other options do not form buffers because they lack the required weak acid and its conjugate base or a weak base and its conjugate acid. For example, option E) HCl, NaCl consists of a strong acid and its conjugate base, which is not capable of buffering pH changes. So therefore the pair of substances capable of forming a buffer in an aqueous solution is option D) CH³COOH, CH³COONa.
To learn more about buffer solution here:
https://brainly.com/question/30332096
#SPJ11
apply kcl and use phasors to determine i1 , knowing that is = 20 cos(ωt 60◦ ) ma, i2 = 6 cos(ωt − 30◦ ) ma
The value of i1 is 22.95 ∠71.57° mA using KCL and phasors.
To determine i1 using KCL and phasors, we need to consider the currents i1 and i2 entering a common node.
First, we need to convert the given sinusoidal currents to phasor form. We can do this by expressing each current as a complex number with a magnitude and phase angle.
For i1, we have
i1 = 20 cos(ωt + 60°) mA
= 20 ∠60° mA
For i2, we have
i2 = 6 cos(ωt - 30°) mA
= 6 ∠(-30°) mA
Now, we can apply KCL to the node to find i1. KCL states that the sum of currents entering a node must equal the sum of currents leaving the node. Therefore
i1 + i2 = is
Substituting in the phasor forms of i1 and i2, we get
20 ∠60° + 6 ∠(-30°) = is
To solve for i1, we can rearrange the equation
i1 = is - i2
= 20 ∠60° - 6 ∠(-30°)
= 20 ∠60° + 6 ∠150°
= 22.95 ∠71.57° mA
Therefore, i1 is 22.95 ∠71.57° mA.
To know more about kcl here
https://brainly.com/question/32069852
#SPJ4
A student has a sample of 1.18 moles of fluorine gas that is contained in a 20.0 L container at 279 K. What is the pressure of the sample? The ideal gas constant is 0.0821 L*atm/mol*K. Please round the answer to the nearest 0.01 and include units.
thank you in advance!
The fluorine gas sample has a pressure of 2.21 atm, rounded to the closest 0.01. Atmospheres (atm) are the units of pressure.
We may use the ideal gas law to calculate the pressure of the fluorine gas sample, which specifies that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we must convert the temperature from Celsius to Kelvin by multiplying it by 273.15. As a result, the temperature is 279 K.
Then we can plug our values into the ideal gas law equation:
P(20.0 L) = (1.18 mol)(0.0821 L*atm/mol*K)(279) K
When we simplify the equation, we get:
P = (1.18 mol)(0.0821 L*atm/mol*K)(279 K)/20.0 L
For more such questions on pressure
https://brainly.com/question/28012687
#SPJ11
What volume of a 1.0 m solution of naoh would be lethal for a 2 kg animal?
To determine the volume of a 1.0 M solution of NaOH that would be lethal for a 2 kg animal, we need to consider the lethal dose (LD50) of NaOH for the animal.
LD50 is the dose that is lethal to 50% of the test population. For this example, let's assume the LD50 of NaOH for a 2 kg animal is 40 mg/kg.
Please note that this is a hypothetical value, and actual LD50 values may vary depending on the specific animal species.
Step 1: Calculate the lethal dose for the 2 kg animal.
Lethal dose = LD50 × animal's weight
Lethal dose = 40 mg/kg × 2 kg
Lethal dose = 80 mg
Step 2: Convert the lethal dose from mg to moles.
Molecular weight of NaOH = 22.99 g/mol (Na) + 15.999 g/mol (O) + 1.007 g/mol (H) ≈ 40 g/mol
80 mg × (1 g/1000 mg) = 0.08 g
0.08 g NaOH × (1 mol/40 g) ≈ 0.002 moles of NaOH
Step 3: Calculate the volume of the 1.0 M NaOH solution needed.
Moles of solute = Molarity × Volume of solution
0.002 moles = 1.0 M × Volume
Volume = 0.002 L or 2 mL
Therefore, the volume of a 1.0 M solution of NaOH that would be lethal for a 2 kg animal is approximately 2 mL.
To know more about lethal dose (LD50)refer here
https://brainly.com/question/30025708#
#SPJ11
13. the reaction has the following rate law: after a period of s, the concentration of no falls from an initial value of 2.8 × 10–3 mol/l to 2.0 × 10–3 mol/l. what is the rate constant, k?
The rate constant for this reaction is –0.29 s–1, which represents the rate of change in concentration of no over time.
To find the rate constant, we can use the equation for the first-order rate law, which is:
Rate = k [A]
Where Rate is the change in concentration of the reactant (in this case NO) over time, k is the rate constant, and [A] is the concentration of the reactant.
We are given the initial concentration of NO (2.8 × 10–3 mol/l) and the concentration after a period of time (2.0 × 10–3 mol/l). We can use this information to calculate the change in concentration:
Δ[A] = [A]final – [A]initial
Δ[A] = (2.0 × 10–3 mol/l) – (2.8 × 10–3 mol/l)
Δ[A] = –0.8 × 10–3 mol/l
Note that the negative sign indicates that the concentration of NO is decreasing over time.
We are also given the time period, s, but we don't need it to solve for the rate constant.
Now we can plug in the values we have into the rate law equation:
Rate = k [A]
Rate = (–0.8 × 10–3 mol/l) / s
k = Rate / [A]
k = (–0.8 × 10–3 mol/l) / (2.8 × 10–3 mol/l)
k = –0.29 s–1
Note that the rate constant is negative, which is expected for a decreasing concentration of a reactant. The units of the rate constant are s–1, which means that the concentration of NO decreases by 0.29 mol/l per second.
To know more about first-order rate law visit:
https://brainly.com/question/13264346
#SPJ11
Calculate the pH of a 0. 10M solution of NaCN(aq). Ka for HCN is 4. 9×10−10 at 25oC. A. 11. 15B. 2. 85C. 8. 75D. 7
The pH of a 0.10M solution of NaCN(aq) can be determined by using the Henderson-Hasselbalch equation. The equation states that pH = pKa + log([base]/[acid]). The answer is C. 8.75.
What is acid?Acid is a substance that has a pH level below 7.0. It is generally characterized as a sour taste, corrosive nature, and the ability to turn certain blue litmus paper red. Acids have a wide range of uses, from industrial to laboratory to the kitchen and beyond. Common uses of acids include cleaning, bleaching, pickling, etching, and neutralizing bases. Acids can be found in many everyday materials such as vinegar, lemon juice, and battery acid. In addition, acids can be classified into two main categories: mineral acids and organic acids.
HCN is the acid and NaCN is the base. The pKa of HCN is 4.9 x 10⁻¹⁰.
Therefore, the pH can be calculated as follows:
pH = 4.9 x 10⁻¹⁰ + log([NaCN]/[HCN])
pH = 4.9 x 10⁻¹⁰ + log(0.10/4.9 x 10⁻¹⁰)
pH = 4.9 x 10⁻¹⁰ + 3.2
pH = 8.75
Therefore the correct option is C.
To learn more about pH on:
https://brainly.com/question/172153
#SPJ4
what is the coefficient for oh−(aq) when mno4−(aq) h2s(g) → s(s) mno(s) is balanced in basic aqueous solution?
The coefficient for OH⁻(aq) in the balanced equation is 8. The equation of a redox reaction in which oxidation and reduction take place is known as a redox equation.
To balance the equation in basic aqueous solution, the following steps can be followed:
Balance the atoms other than oxygen and hydrogen. In this case, Mn and S are already balanced.
Balance oxygen atoms by adding H₂O to the side that needs more oxygen. In this case, the left side needs more oxygen, redox reaction so we add H₂O to the left side:
MnO₄⁻(aq) + H₂S(g) → S(s) + MnO₂(s) + H₂O
Balance hydrogen atoms by adding H⁺ ions to the side that needs more hydrogen. In this case, the right side needs more hydrogen, so we add H⁺ ions to the right side:
MnO₄⁻(aq) + H₂S(g) → S(s) + MnO₂(s) + H₂O + 4H⁺
Balance the charge by adding electrons. In this case, the left side has a charge of -1, while the right side has a charge of +2. To balance the charges, we add 6 electrons to the left side:
MnO₄⁻(aq) + H₂S(g) + 6OH⁻(aq) → S(s) + MnO₂(s) + H₂O + 4H₂O + 6e⁻
Finally, balance the electrons by multiplying the half-reactions by appropriate coefficients. In this case, we multiply the reduction half-reaction by 6 and the oxidation half-reaction by 1:
6MnO₄⁻(aq) + 6H₂S(g) + 6OH⁻(aq) → 6S(s) + 6MnO₂(s) + 7H₂O
Therefore, the coefficient for OH⁻(aq) in the balanced equation is 6 × 2 = 12.
Learn more about redox reaction here
https://brainly.com/question/28059368
#SPJ11
Pure oxygen gas was first prepared by heating mercury (II) oxide, HgO:
2HgO(s)→2Hg(l)+O2(g)2HgO(s)→2Hg(l)+O2(g)
What volume (in liters) of oxygen at STP is released by heating 10.57 g of HgO?
The reaction of sodium peroxide Na2O2Na2O2 with CO2 is used in space vehicles to remove CO2 from the air and generate O2 for breathing :
2Na2O2(s)+2CO2(g)→2Na2CO2(s)+O2(g)2Na2O2(s)+2CO2(g)→2Na2CO2(s)+O2(g)
a. Assuming that the air is breathed at an average rate of 4.50 L/min 25.0 degree Celsius; 735 mmHg and the concentration of CO2 in expelled air is 3.40% by volume , how many grams of CO2 are produced in 24.0 hour?
b. How many days would a 3.65 kg supply of Na2O2Na2O2 last?
a. 895.9 g of [tex]CO_2[/tex] are produced in 24 hours.
b. A 3.65 kg supply of [tex]Na_2O_2[/tex] would produce enough [tex]O_2[/tex] is 6.16 kg of O2
a. First, we need to calculate the volume of air breathed in 24 hours:
24 hours = 1440 minutes
1440 minutes x 4.50 L/min = 6,480 L
The volume percent of [tex]CO_2[/tex] in air is 0.034, so the volume of [tex]CO_2[/tex]produced is:
6,480 L x 0.034 = 220.32 L
Using the ideal gas law, we can convert this volume of [tex]CO_2[/tex] to moles:
PV = nRT
(735 mmHg) (220.32 L) = n (0.08206 L·atm/mol·K) (298 K)
n = 20.38 mol [tex]CO_2[/tex]
Finally, we can convert moles of [tex]CO_2[/tex] to grams using the molar mass of [tex]CO_2[/tex]:
20.38 mol [tex]CO_2[/tex] x 44.01 g/mol = 895.9 g [tex]CO_2[/tex]
b. We can use the given balanced equation to calculate the amount of [tex]Na_2O_2[/tex] needed to produce 1 mole of [tex]O_2[/tex]:
[tex]2Na_2O_2(s) + 2CO_2(g) = 2Na_2CO_3(s) + O_2(g)[/tex]
1 mole of [tex]Na_2O_2[/tex] produces 1/2 mole of [tex]O_2[/tex].
To produce 3.65 kg (3650 g) of [tex]O_2[/tex], we need:
3650 g [tex]O_2[/tex]x (1 mole [tex]O_2[/tex]/ 32.00 g) x (2 moles [tex]Na_2O_2[/tex] / 1 mole [tex]O_2[/tex]) x (77.98 g Na2O2 / 1 mole [tex]Na_2O_2[/tex] ) = 18,926 g [tex]Na_2O_2[/tex]
Therefore, a 3.65 kg supply of [tex]Na_2O_2[/tex] would last:
3650 g [tex]O_2[/tex] / (18,926 g [tex]Na_2O_2[/tex] / 2) = 0.386 cycles
Each cycle produces 1/2 mole of [tex]O_2[/tex] , so a single cycle produces:
(1/2 mole [tex]O_2[/tex]) x (32.00 g/mole) = 16.00 g [tex]O_2[/tex]
Therefore, a 3.65 kg supply of [tex]Na_2O_2[/tex] would produce enough [tex]O_2[/tex] for:
0.386 cycles x 16.00 g [tex]O_2[/tex] /cycle = 6.16 kg of [tex]O_2[/tex]
For more question on hours click on
https://brainly.com/question/29859174
#SPJ11
menthol is a very cool compound. if a sample of menthol is examined by uv spectroscopy, what would you expect to see? why? [10 pts]
UV spectroscopy of menthol would show absorption peaks corresponding to its aromatic ring and double bonds, due to pi-electron transitions.
When examining menthol using UV spectroscopy, you would expect to see absorption peaks that correspond to the compound's aromatic ring and any double bonds present.
This is because UV spectroscopy detects pi-electron transitions, which are typically associated with conjugated systems such as aromatic rings and double bonds.
In menthol, these conjugated systems absorb UV light, causing electrons to transition to higher energy levels.
The resulting spectrum would display peaks at specific wavelengths, which can be used to analyze the molecular structure and characteristics of the menthol compound.
For more such questions on electron, click on:
https://brainly.com/question/26084288
#SPJ11
Menthol is not expected to show any absorption in the UV region because it does not contain any chromophores or functional groups that absorb in that region.
UV spectroscopy is a technique used to study the electronic transitions of compounds. Chromophores are functional groups that contain conjugated pi-electron systems that absorb in the UV region.
Examples of chromophores include carbonyl groups, double bonds, and aromatic rings.
Menthol, on the other hand, does not contain any of these functional groups, so it does not have any chromophores that absorb in the UV region. As a result, menthol is not expected to show any absorption in the UV region.
Learn more about Menthol here :
https://brainly.com/question/31129553
#SPJ11
how many moles are there in 2.27 x 10^24 atoms of copper?
There are approximately 3.76 moles of copper atoms in 2.27 x10^{24}atoms of copper.
To determine the number of moles in 2.27 x 10^{24} atoms of copper, we need to use Avogadro's number, which states that one mole of any substance contains 6.022 x 10^{23} particles (atoms, molecules, etc.). First, we calculate the number of moles by dividing the given number of atoms by Avogadro's number:
2.27 x [tex]10^{24}[/tex] atoms / 6.022 x 10^{23} atoms/mol = 3.76 mol
Therefore, there are approximately 3.76 moles of copper atoms in 2.27 x 10^{24} atoms of copper.
Learn more about moles here: https://brainly.com/question/29367909
#SPJ11
19) How much water is needed to make a 1. 5 M solution using 44 grams of CaCO3?
0. 66 L
1. 1 L
0. 56 L
0. 29 L
To make a 1.5 M solution using 44 grams of [tex]CaCO_3,[/tex] approximately 0.66 L (or 660 mL) of water is needed.
To determine the amount of water required to make a 1.5 M solution of CaCO3, we need to consider the molar concentration and the mass of the solute. In this case, the desired concentration is 1.5 M, and the mass of CaCO3 is given as 44 grams.
First, we need to calculate the number of moles of [tex]CaCO_3[/tex]. This can be done by dividing the given mass of [tex]CaCO_3[/tex] (44 grams) by its molar mass (100.09 g/mol). This gives us the number of moles of [tex]CaCO_3[/tex].
Next, using the formula for molarity, which is moles of solute divided by volume of solution in liters, we can determine the volume of the solution. Since we want a 1.5 M solution, we divide the moles of [tex]CaCO_3[/tex] by the desired concentration (1.5 M) to find the volume of the solution in liters.
To convert the volume from liters to milliliters, we multiply by 1000. Therefore, the amount of water needed to make the 1.5 M solution with 44 grams of [tex]CaCO_3[/tex] is approximately 0.66 L (or 660 mL).
Learn more about molar concentration here:
https://brainly.com/question/21841645
#SPJ11
You have a container of powdered copper(II) sulfate (CuSO4) and all standard lab equipment. For a lab, you
need 1. 00 L of 2. 00 M solution.
To prepare a 1.00 L of 2.00 M solution of copper(II) sulfate (CuSO4), you would follow the steps below: Calculate the amount of copper(II) sulfate needed.
Molarity (M) = moles of solute / volume of solution (L)
moles of solute = Molarity × volume of solution (L)
moles of CuSO4 = 2.00 mol/L × 1.00 L = 2.00 moles
2. Determine the molar mass of copper(II) sulfate (CuSO4):
Cu: 1 atom × atomic mass = 1 × 63.55 g/mol = 63.55 g/mol
S: 1 atom × atomic mass = 1 × 32.07 g/mol = 32.07 g/mol
O4: 4 atoms × atomic mass = 4 × 16.00 g/mol = 64.00 g/mol
Total molar mass = 63.55 g/mol + 32.07 g/mol + 64.00 g/mol = 159.62 g/mol
3. Calculate the mass of copper(II) sulfate needed:
mass = moles × molar mass = 2.00 moles × 159.62 g/mol = 319.24 grams
4. Weigh out 319.24 grams of powdered copper(II) sulfate using a balance.
5. Transfer the weighed copper(II) sulfate into a container or beaker.
6. Add distilled water to the container while stirring to dissolve the copper(II) sulfate. Continue adding water until the total volume reaches 1.00 L.
7. Stir the solution well to ensure thorough mixing.
8. You now have a 1.00 L of 2.00 M copper(II) sulfate solution ready for your lab experiment.
To learn more about copper click here:
brainly.com/question/30892946
#SPJ11
If 14.2g of a gas occupy 45.6L at 10.0 C and 600.0 mmHg, determine the density at STP.
According to ideal gas equation the density at STP is 102.47 g/cm³.
The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law .
It is given as, PV=M/RT where R= gas constant whose value is 8.314.The law has several limitations.Substitution of values in equation gives density= 14.2×600/8.314×10102.47 g/cm³.
Learn more about ideal gas law,here:
https://brainly.com/question/6534096
#SPJ1
31. Solve an equilibrium problem (using an ice table) to calculate the ph of each solution. 0. 15 m hf 0. 15 m naf a mixture that is 0. 15 m in hf and 0. 15 m in naf
Equilibrium: The pH of the mixture of 0.15 M HF and 0.15 M NaF is 2.96.
What is equilibrium?
In chemistry, equilibrium refers to a state in which a reversible chemical reaction appears to have stopped changing over time. This occurs when the rate of the forward reaction is equal to the rate of the reverse reaction, so that the concentrations of the reactants and products remain constant.
The solubility equilibrium for [tex]$\text{Ag}_2\text{CrO}_4$[/tex] can be represented as:
[tex]Ag_2CrO_4(s)\rightleftharpoons2Ag+(aq)+CrO_4^{2-}(aq)Ag_2CrO_ 4(s)\rightleftharpoons2Ag +(aq)+CrO_4^{2-}(aq)[/tex]
The Ksp expression for this equilibrium is:
[tex]sp=[Ag^+]2[CrO_4^{2-}]K sp=[Ag + 2[CrO_4^{2-} ][/tex]
To bold the keywords in the main answer, you can use the \textbf command in LaTeX. Here's an example:
Therefore, the pH of the mixture of 0.15 M HF and 0.15 M NaF is:
[tex]{pH = -log[H3O^+] = -log(1.1 \times 10^-3) = 2.96}[/tex]
To know more about equilibrium visit:
https://brainly.com/question/517289
#SPJ4
solve the time independent schrodinger equation for a particle of mass m and eneegy e>v0 incident from the left
To solve the time-independent Schrödinger equation for a particle of mass m and energy E > V₀ incident from the left, we can consider a one-dimensional potential step.
The Schrödinger equation for the region where the potential is V = 0 is given by:
-ħ²/2m * d²ψ/dx² = Eψ
The Schrödinger equation for the region where the potential is V = V₀ (step region) is given by:
-ħ²/2m * d²ψ/dx² + V₀ψ = Eψ
To solve the equation in the region where V = 0, the general solution is a combination of a left-moving and a right-moving wave:
ψ₁(x) = Ae^(ik₁x) + Be^(-ik₁x)
Where:
- A and B are constants to be determined.
- k₁ = √(2mE)/ħ
To solve the equation in the region where V = V₀, the general solution is an exponential decay:
ψ₂(x) = Ce^(κx)
Where:
- C is a constant to be determined.
- κ = √(2m(V₀ - E))/ħ
Now, let's match the wavefunction and its derivative at the boundary between the two regions (x = 0). This gives us two conditions:
1. Continuity of the wavefunction:
ψ₁(0) = ψ₂(0)
A + B = C
2. Continuity of the derivative of the wavefunction:
(dψ₁/dx)(0) = (dψ₂/dx)(0)
ik₁(A - B) = κC
From these two equations, we can solve for A, B, and C.
Once we have determined the coefficients, we can write the final wavefunction for each region.
To learn more about Schrodinger equation :
https://brainly.com/question/20380615
#SPJ11
here we derive a method to measure the contributions of entropy and internal energy to the elasticity e. for isothermal stretching, we may write:
Summary:
We can measure the contributions of entropy and internal energy to elasticity (e) during isothermal stretching by using a specific method.
To measure the contributions of entropy and internal energy to elasticity (e) during isothermal stretching, we can use the following method:
e[tex]= -V(dP/dV)T[/tex]
where V is the volume, P is the pressure, T is the temperature, and dP/dV is the pressure derivative with respect to volume.
By calculating the partial derivatives of the equation above, we can obtain:
[tex](e/T) = -(dS/dV)T - (dU/dV)T[/tex]
where S is the entropy, U is the internal energy, and dS/dV and dU/dV are the partial derivatives of entropy and internal energy with respect to volume, respectively.
Thus, we can measure the contributions of entropy and internal energy to elasticity (e) by calculating the partial derivatives of entropy and internal energy with respect to volume and substituting them into the equation above.
Learn more about isothermal here:
https://brainly.com/question/12023162
#SPJ11
How many joules are require to raise the temperature of 220. g of Leads .pb = 0.130 joules /g.C )from 42.0°C to 72.0 °C? O 858 O 3.90 j O 76.0 j O 65.73
The answer is 858 joules, which is the amount of energy required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C.
To calculate the joules required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C, we can use the formula Q = m x C x ∆T, where Q is the amount of heat energy required, m is the mass of the substance, C is the specific heat capacity of the substance, and ∆T is the change in temperature.
Substituting the values given in the question, we get:
Q = 220 g x 0.130 joules/g.C x (72.0°C - 42.0°C)
Q = 220 g x 0.130 joules/g.C x 30.0°C
Q = 858 joules
Therefore, the answer is 858 joules, which is the amount of energy required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C.
To know more about Temperature visit:
https://brainly.com/question/31055263
#SPJ11
complete and balance the equation for this reaction in acidic solution. equation: 2mno_{4}^{-} h^{ } hno_{2} -> 5no_{3}^{-} 2mn^{2 } 3h_{2}o 2mno−4 h hno2⟶5no−3 2mn2 3h2o
The balanced equation for the reaction in acidic solution is:
2MnO₄⁻ + 3H₂O + 10H⁺ → 5NO₃⁻ + 2Mn²⁺ + 8H₂O
What is the balanced equation for the given reaction in acidic solution?In this redox reaction, the permanganate ion (MnO₄⁻) is reduced to form nitrate ions (NO₃⁻) and manganese(II) ions (Mn²⁺).
To balance the equation, the number of atoms on both sides of the equation must be equal, as well as the charges. To achieve balance, 2 MnO₄⁻ ions are needed, which require 10 H⁺ ions and 5 NO₃⁻ ions. On the product side, 2 Mn²⁺ ions are formed along with 8 H₂O molecules. By adding water molecules and H⁺ ions on the left side, the equation is balanced. The balanced equation is:
2MnO₄⁻ + 3H₂O + 10H⁺ → 5NO₃⁻ + 2Mn²⁺ + 8H₂O
Balancing chemical equations is a fundamental skill in chemistry. In acidic solutions, the presence of H⁺ ions allows for the balancing of redox reactions by adding H₂O molecules and H⁺ ions to both sides.
The goal is to ensure that the number of atoms and charges are conserved. Understanding the principles of balancing equations helps in predicting the products of chemical reactions and determining the stoichiometry of reactants and products.
Learn more about reaction
brainly.com/question/30464598
#SPJ11
Determine the amount of oxygen, o2 moles that react with 2.75 moles of aluminum, al.
2.75 moles of aluminum (Al) will react with 5.5 moles of oxygen (O2) according to the balanced chemical equation. This is determined by the mole ratio between Al and O2.
To determine the amount of oxygen (O2) that reacts with 2.75 moles of aluminum (Al), we need to refer to the balanced chemical equation. The balanced equation for the reaction between aluminum and oxygen is:
4 Al + 3 O2 → 2 Al2O3
From the equation, we can see that 4 moles of aluminum react with 3 moles of oxygen to produce 2 moles of aluminum oxide (Al2O3). By using the mole ratio between aluminum and oxygen, we can calculate the amount of oxygen required. Since the mole ratio is 4:3, for every 4 moles of aluminum, we need 3 moles of oxygen. Therefore, for 2.75 moles of aluminum, we will require (2.75 × 3) / 4 = 5.5 moles of oxygen.
Learn more about Aluminum here: brainly.com/question/28989771
#SPJ11
Resources to make items like your shoes, your computer, and water bottles come from all over the world. As human populations increase, the demand for resources to make these items increases. Select the best response that explains how the consumption of resources impacts Earth's environments.
The consumption of resources impacts Earth's environments by causing habitat destruction, biodiversity loss, air and water pollution, and climate change.
As the demand for resources increases, more and more land is cleared for mining, logging, and agriculture, leading to habitat destruction and biodiversity loss. The extraction, processing, and transportation of resources also release pollutants into the air and water, which can harm ecosystems and human health.
The burning of fossil fuels, which are often used to power the production and transportation of goods, releases greenhouse gases that contribute to climate change. Therefore, it is important for individuals and societies to consider the environmental impacts of their consumption choices and find ways to reduce their ecological footprint.
To know more about the Resources, here
https://brainly.com/question/12216242
#SPJ1
if a substance has a half-life of 3.70 days, and there are initially 50.0 g of the substance, how many grams will remain after precisely three weeks?
After precisely three weeks, approximately 3.91 grams of the substance will remain.
What is the mass of the substance(Half life) after three weeks?The half-life of a substance is the time it takes for half of the initial amount to decay or transform into another substance. In this case, if the half-life is 3.70 days, it means that after 3.70 days, half of the substance will remain, and after another 3.70 days, half of that remaining amount will remain, and so on.
To find out how many grams will remain after precisely three weeks, we need to convert the time to the same unit as the half-life. There are 7 days in a week, so three weeks would be equal to 3 × 7 = 21 days. Now, we can calculate the number of half-lives that have occurred within this time frame by dividing 21 days by 3.70 days.
21 days ÷ 3.70 days = 5.68 half-lives
Since each half-life reduces the amount by half, we can calculate the remaining amount by raising 0.5 to the power of the number of half-lives:
Remaining amount = Initial amount × (0.5)^(number of half-lives)
Remaining amount = 50.0 g × (0.5)^(5.68)
Remaining amount ≈ 3.91 g
Therefore, after precisely three weeks, approximately 3.91 grams of the substance will remain.
Learn more about half-life .
brainly.com/question/31666695
#SPJ11
when propane undergoes complete combustion, the products are carbon dioxide and water. c3h8(g) o2(g) co2(g) h2o(g) what are the respective coefficients when the equation is balanced with the smallest whole numbers?
These coefficients represent the number of moles of each substance that are present in a given amount of propane that undergoes complete combustion.
When propane undergoes complete combustion, the balanced equation is:
C₃H₈ + 7O2 → 4CO₂ + 4H₂O
To determine the coefficients for each compound, we can use the balanced equation and the mole ratios of the products.
The mole ratio of carbon dioxide to propane is 4:1, since there are four moles of carbon dioxide for every mole of propane that undergoes combustion.
The mole ratio of water to propane is 4:1, since there are four moles of water for every mole of propane that undergoes combustion.
The mole ratio of carbon dioxide to oxygen is 1:4, since there is one mole of carbon dioxide for every four moles of oxygen that participate in the reaction.
The mole ratio of hydrogen to oxygen is 2:4, since there are two moles of hydrogen for every four moles of oxygen that participate in the reaction.
We can use these mole ratios to write the balanced equation with the smallest whole numbers:
C₃H₈ + 7O₂ → 4CO₂ + 4H₂O
The coefficients in this equation are the same as the mole ratios, so the coefficients for each compound are:
C3H8: 1
O2: 7
CO2: 4
H2O: 4
Therefore, the coefficients for shako-avatar
When propane undergoes complete combustion, the balanced equation is:
C3H8 + 7O2 → 4CO2 + 4H2O
To determine the coefficients for each compound, we can use the balanced equation and the mole ratios of the products.
The mole ratio of carbon dioxide to propane is 4:1, since there are four moles of carbon dioxide for every mole of propane that undergoes combustion.
The mole ratio of water to propane is 4:1, since there are four moles of water for every mole of propane that undergoes combustion.
The mole ratio of carbon dioxide to oxygen is 1:4, since there is one mole of carbon dioxide for every four moles of oxygen that participate in the reaction.
The mole ratio of hydrogen to oxygen is 2:4, since there are two moles of hydrogen for every four moles of oxygen that participate in the reaction.
We can use these mole ratios to write the balanced equation with the smallest whole numbers:
C3H8 + 7O2 → 4CO2 + 4H2O
The coefficients in this equation are the same as the mole ratios, so the coefficients for each compound are:
C3H8: 1
O2: 7
CO2: 4
H2O: 4
Therefore, the coefficients for propane, carbon dioxide, oxygen, and water when the equation is balanced with the smallest whole numbers are:
C₃H₈: 1
O₂: 7
CO₂: 4
H₂O: 4
These coefficients represent the number of moles of each substance that are present in a given amount of propane that undergoes complete combustion. , carbon dioxide, oxygen, and water when the equation is balanced with the smallest whole numbers are:
C₃H₈: 1
O₂: 7
CO₂: 4
H₂O: 4
These coefficients represent the number of moles of each substance that are present in a given amount of propane that undergoes complete combustion.
Learn more about coefficients
https://brainly.com/question/1594145
#SPJ4
a gas made up of homonuclear diatomic molecules escapes through a pinhole 8.07 times as fast as xe gas. write the chemical formula of the gas
Therefore, the molar mass of X gas is 1.67 times that of Xe gas. Since X gas is made up of homonuclear diatomic molecules, its chemical formula must be either N2, O2, F2, Cl2, Br2, or I2.
Let's denote the unknown gas as "X" and its molar mass as "M". The molar mass of Xe gas is 131.29 g/mol. According to Graham's law, we have:
(rate of effusion of X gas) / (rate of effusion of Xe gas) = sqrt(MXe) / sqrt(MX)
Substituting the given ratio of effusion rates, we get:
8.07 = sqrt(131.29 / MX) / sqrt(131.29 / M)
Squaring both sides of the equation and solving for MX, we get:
MX = 131.29 / (8.07^2) * M
Simplifying the expression, we get:
MX = 1.67 * M
Therefore, the molar mass of X gas is 1.67 times that of Xe gas. Since X gas is made up of homonuclear diatomic molecules, its chemical formula must be either N2, O2, F2, Cl2, Br2, or I2.
The gas you are referring to is a homonuclear diatomic gas, meaning it consists of two identical atoms bonded together. The rate at which a gas escapes through a pinhole is inversely proportional to the square root of its molar mass, as described by Graham's law of effusion.
To know more about molar mass visit:-
https://brainly.com/question/22997914
#SPJ11
determine the minimum concentration of cuno3 required to precipitate iodide from a solution containing [i-] = 0.017 m. for cui, ksp = 5.1 x 10-12
The minimum concentration of Cu(NO3)2 required to precipitate iodide from a solution containing [I-] = 0.017 M can be calculated using the Ksp expression for CuI. The minimum concentration is approximately 3.4 x 10^-7 M.
[tex]CuI(s) ⇌ Cu2+(aq) + 2I-(aq)[/tex]
[tex]Ksp = [Cu2+][I-]^2 = 5.1 x 10^-12[/tex]
Let x be the molar solubility of CuI in the presence of 0.017 M I-.
Then, [Cu2+] = x and [I-] = 0.017 + 2x.
Substituting into the Ksp expression and solving for x, we get x = 3.4 x 10^-7 M.
Therefore, the minimum concentration of Cu(NO3)2 required to precipitate iodide is approximately 3.4 x 10^-7 M.
Learn more about molar here:
https://brainly.com/question/8732513
#SPJ11
caso4 mg(oh) 2 -> ca(oh)2 mg so4 is the reaction of
Chemical equation you provided, "CaSO4 + Mg(OH)2 -> Ca(OH)2 + MgSO4," is not a balanced equation, and it does not represent a valid chemical reaction. Calcium sulfate (CaSO4) and magnesium hydroxide (Mg(OH)2) do not undergo a direct displacement or exchange reaction to form calcium hydroxide (Ca(OH)2) and magnesium sulfate (MgSO4).
However, I can provide you with some information on the individual compounds involved in the equation.Calcium sulfate (CaSO4) is a compound commonly known as gypsum. It is a white crystalline solid and is frequently used in construction materials. It can also be found in certain mineral deposits.
Magnesium hydroxide (Mg(OH)2), also known as milk of magnesia, is an inorganic compound with a white, powdery appearance. It is commonly used as an antacid and laxative due to its ability to neutralize excess stomach acid.
Calcium hydroxide (Ca(OH)2), also called slaked lime or hydrated lime, is a white, crystalline solid. It is sparingly soluble in water and is often used in various applications, including as a component in building materials, in wastewater treatment, and as a pH regulator.
Magnesium sulfate (MgSO4), also known as Epsom salt, is a compound composed of magnesium, sulfur, and oxygen. It is a colorless crystal often used in bath salts, as a fertilizer, and in medicine as a source of magnesium or as a laxative.
Although the equation you provided does not represent a valid chemical reaction, the information above should give you a general understanding of the compounds involved.
To know more about Calcium sulfate refer here
https://brainly.com/question/7962933#
#SPJ11
Consider the following reaction at equilibrium. What will happen if Fes2 is removed from the reaction?4 FeS2(s) + 11 O2(g) ⇌ 2 Fe2O3(s) + 8 SO2(g)a. The equilibrium constant will decrease.b. No change in equilibrium is observed.c. The equilibrium will change in the direction of the reactants.d. The equilibrium constant will increase.e. The equilibrium will change in the direction of the products.
If FeS2 is removed from the reaction, the equilibrium will change in the direction of the reactants, in order to replace the Fes2 that was removed.
Correct option is, C.
In the given reaction, Fes2 is one of the reactants. According to Le Chatelier's principle, if a reactant is removed from a reaction at equilibrium, the equilibrium will shift in the direction of the reactants to try to replace the reactant that was removed. In this case, if Fes2 is removed, the equilibrium will shift to the left, towards the reactants, in order to replace the Fes2 that was removed.
When FeS2 is removed from the reaction, the equilibrium will shift to counteract this change according to Le Chatelier's principle. Since FeS2 is a reactant, the equilibrium will shift in the direction of the reactants to replenish the lost FeS2.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ11
If iron (iii) oxide is produced from 8.74g of iron, how many grams of oxygen are needed to react for this reaction?
2fe+3o2---->fe2o3
To determine the amount of oxygen required to react with 8.74g of iron, the balanced chemical equation is considered. 7.5152 grams of oxygen are needed to react with 8.74 grams of iron.
According to the balanced chemical equation, 2 moles of iron (Fe) react with 3 moles of oxygen (O2) to produce iron (III) oxide ([tex]Fe_2O_3[/tex]). To find the amount of oxygen needed, we need to calculate the number of moles of iron (Fe) present in 8.74g using its molar mass, which is 55.85 g/mol.
First, we divide the given mass of iron by its molar mass:
8.74g / 55.85 g/mol = 0.1565 mol
Since the molar ratio between iron and oxygen is 2:3, we can calculate the number of moles of oxygen using the ratio:
[tex]0.1565 mol of Fe * (3 mol of O_2 / 2 mol of Fe) = 0.2348 mol[/tex]
Finally, we can convert the moles of oxygen into grams by multiplying by its molar mass, which is 32 g/mol:
0.2348 mol * 32 g/mol = 7.5152 g
Therefore, 7.5152 grams of oxygen are needed to react with 8.74 grams of iron.
Learn more about iron (III) oxide here:
https://brainly.com/question/19392610
#SPJ11
do two identical half-cells constitute a galvanic cell? (look at e and f)
Yes, two identical half-cells can indeed constitute a galvanic cell. In fact, this is often the case in laboratory experiments where the focus is on understanding the principles of electrochemistry.
A galvanic cell is made up of two half-cells, each of which contains an electrode and an electrolyte solution. When the two half-cells are connected by a wire and a salt bridge, a flow of electrons occurs from the electrode with the higher potential to the electrode with the lower potential. This creates a current that can be used to do work.
In the case of two identical half-cells, the two electrodes have the same potential, so there is no potential difference between them. As a result, there will be no net flow of electrons and no current will be generated. However, this setup can still be useful for certain types of experiments, such as those that focus on the behavior of specific electrolytes or the effects of temperature on electrochemical reactions.
Know more about Galvanic Cells here:
https://brainly.com/question/13031093
#SPJ11
a 295 g aluminum engine part at an initial temperature of 3.00 °c absorbs 85.0 kj of heat. what is the final temperature of the part
the final temperature of the aluminum engine part is 68.7 °C To solve this problem, we can use the specific heat capacity of aluminum (0.903 J/g°C) to calculate how much the temperature of the engine part will increase when it absorbs 85.0 kJ of heat.
This tells us the change in temperature of the engine part. To find the final temperature, we need to add this to the initial temperature of 3.00 °C: Final temperature = initial temperature + ΔT Final temperature = 3.00 °C + 324.9 °C Final temperature = 327.9 °C the melting point of aluminum (660.3 °C). So we need to double check our work. where q is the heat absorbed (in joules), m is the mass (in grams), c is the specific heat capacity of aluminum (in J/g°C), and ΔT is the change in temperature (final temperature - initial temperature).
Step 1: Convert the heat absorbed from kJ to J. 85.0 kJ * 1000 J/kJ = 85,000 J Step 2: Find the specific heat capacity of aluminum.c = 0.897 J/g°C (specific heat capacity of aluminum) Step 3: Rearrange the formula to solve for ΔT. ΔT = q / (mc) Step 4: Substitute the values and calculate ΔT. ΔT = 85,000 J / (295 g * 0.897 J/g°C) ≈ 318.62°C
Step 5: Calculate the final temperature. Final temperature = Initial temperature + ΔT Final temperature = 3.00°C + 318.62°C ≈ 321.62°C So, the final temperature of the aluminum engine part after absorbing 85.0 kJ of heat is approximately 321.62°C.
To know more about aluminum visit :
https://brainly.com/question/9496279
#SPJ11