Explanation:
The water cycle basically involves five steps:
evaporation and transpiration ⇄condensation, ⇄precipitation, ⇄runoff, ⇄infiltration ⇄So when a thunderstorm occurs it helps in completing the precipitation process by enabling the release of water vapor stored up in the atmosphere to fall on the ground as rain.
After this, the water runoffs to the surface of the ground, on plants, into rocks, rivers, and lakes.
Next, the Infiltration process enables the water on the ground surface to enter the soil some of which becomes groundwater.
The cycle begins again as the evaporation and transpiration process begins, where the groundwater as a result of heat from the sun is taken back into the atmosphere, while water in plants by means of transpiration goes back into the atmosphere.
It then condenses and falls back as precipitation again.
The water cycle is the continuous movement of water within the atmosphere and surface and it is described by five major steps.
The given problem is based on the concept of water cycle. The continuous movement of water within the Earth and its atmosphere, is known as water cycle. The water cycle basically involves five steps:
evaporation and transpiration condensation precipitation,runoff infiltrationSo when a thunderstorm occurs it helps in completing the precipitation process by enabling the release of water vapor stored up in the atmosphere to fall on the ground as rain.
After this, the water runoffs to the surface of the ground, on plants, into rocks, rivers, and lakes. Next, the Infiltration process enables the water on the ground surface to enter the soil some of which becomes groundwater.
The cycle begins again as the evaporation and transpiration process begins, where the groundwater as a result of heat from the sun is taken back into the atmosphere, while water in plants by means of transpiration goes back into the atmosphere. It then condenses and falls back as precipitation again.
Thus, we can conclude that the water cycle is the continuous movement of water within the atmosphere and surface and it is described by five major steps.
Learn more about the water cycle here:
https://brainly.com/question/1535846
The moon has approximately 1/6th the
gravitational pull that the earth has. If something
has a mass of 60kg on Earth, what is its mass on
the moon?
Answer:
m = 60 [kg] (mass on the moon)
Explanation:
We must remember that the mass is conserved, that is, it remains the same regardless of where it is located.
The only variation is the weight, which is different from the mass. Weight is determined by means of the product of mass by gravitational acceleration.
Therefore the mass of 60 [kg] on Earth will be the same mass on the moon.
The tubes that go from the trachea into the lungs
if a Man suit a spare at a place where
the sea the fish inside the water is it possible that it will heat the fish give reason
Answer:
Yes
Explanation:
A person wants to find the width of the lake by shouting and listening for the echo from the far side. If his echo returns after 2 seconds how wide is the lake? (Velocity of sound is 340 m/sec)
Answer:
The width of the lake is 340 m
Explanation:
Constant Velocity Motion
It occurs when an object travels the same distance every equal interval. For example, if it travels 5 m in one second, then 10 m in two seconds, etc., it has a constant velocity.
The speed of the sound is assumed as v=340 m/s and the person measures the time that a sound goes and comes from the edge of a lake as t=2 seconds. The distance it travels is:
d = v.t
d = 340 m/s * 2 s
d = 680 m
But that distance is twice the width of the lake, the real measured width is 680 m / 2 = 340 m
The width of the lake is 340 m
reaction takes place that is expected to yield 171.9 g of product, but only yields 154.8 g. What is the percent error for this experiment?
Answer:
9.95 percent
Explanation:
To get the percentage error, we use the following formula:
Percentage error = (expected output- actual output)/expected output X 100
Where
expected output: This is the mass of the end product after the chemical reaction that was expected = 171.9g
actual output: This is the mass of the end product after the chemical reaction that was observed = 154.8 g
Percentage error = [tex]\frac{171.9-154.8}{171.9} X 100= 9.95 percent[/tex]
Therefore the percentage error in the experiment is 9.95 percent.
The percent error for this experiment in which the reaction takes place to yield 171.9 g of product is 9.95%.
What is percentage of error?The difference between the measured or calculated value during the experiment or calculating and the known value is called the error. The percentage of error is the 100 times of this difference when divided with known value.
The expected value of the reaction to yield is 171.9 g of product. The experimental value of the reaction to yields is 154.8 g of product.
Thus, the percent error for this experiment
[tex]P=\left(\dfrac{171.9-154.8}{171.9}\right)\times100\\P=9.95\%[/tex]
Thus, the percent error for this experiment in which the reaction takes place to yield 171.9 g of product is 9.95%.
Learn more about the percentage of error here;
https://brainly.com/question/10218601
What is the kinetic energy of a 0.150 kg
object moving at a velocity of 100m/s?
Answer:
750J
Explanation:
Given parameters:
Mass of the object = 0.15kg
Velocity of the object = 100m/s
Unknown:
Kinetic energy of the body = ?
Solution:
The kinetic energy is the energy due to the motion of a body. It is mathematically expressed as;
K.E = [tex]\frac{1}{2}[/tex] m v²
m is the mass of the body
v is the velocity
Now insert the parameters and solve;
K.E = [tex]\frac{1}{2}[/tex] x 0.15 x 100² = 750J
Choose the sequence of energy forms that best fits each item.
Answer:
1. chemical energy --> electrical energy --> light energy
2. Electrical Energy --> Mechanical Energy
3. Electrical Energy --> Heat Energy
4. Chemical Energy --> Thermal Energy --> Mechanical Energy
5. Nuclear Energy --> Light energy and thermal energy
6. Mechanical Energy --> Electric Energy
7. Chemical Energy --> Electrical Energy --> Sound Energy
8. Mechanical Energy --> Sound Energy
Explanation:
1.FLASHLIGHT:
chemical energy --> electrical energy --> light energy
The chemical energy from the cell batteries is converted to electrical energy, which is used to produce the light energy in form of flashlight.
2.ELECTRIC SAW:
Electrical Energy --> Mechanical Energy
The electrical energy from the socket is converted to the mechanical energy used to run the saw blade.
3.TOASTER:
Electrical Energy --> Heat Energy
The electrical energy from the socket is converted to the heat energy (thermal energy) used in browning the bread.
4.GAS POWERED SCOOTER:
Chemical Energy --> Thermal Energy --> Mechanical Energy
The chemical energy from fuel, such as petrol is converted to heat (thermal energy) in the engine by the process of combustion. This heat is then used to do work by conversion into mechanical energy, through piston movement, which in turn moves the shaft and the scooter.
5.THE SUN:
Nuclear Energy --> Light energy and thermal energy
The nuclear reactions on Sun provide nuclear energy which is converted into light and thermal energy that reaches us on earth.
6.WIND TURBINE:
Mechanical Energy --> Electric Energy
The mechanical energy is provided by wind when it rotates the blade of turbine. This is then converted to electrical energy b the turbine.
7.IPOD:
Chemical Energy --> Electrical Energy --> Sound Energy
The chemical energy i supplied by the battery of ipod, which is converted to electrical energy and that electrical energy is used to produce sound by ipod.
8.SPEAKER VIBRATES
Mechanical Energy --> Sound Energy
The mechanical energy due to vibration produces sound energy.
Answer:
1. chemical energy --> electrical energy --> light energy
2. Electrical Energy --> Mechanical Energy
3. Electrical Energy --> Heat Energy
4. Chemical Energy --> Thermal Energy --> Mechanical Energy
5. Nuclear Energy --> Light energy and thermal energy
6. Mechanical Energy --> Electric Energy
7. Chemical Energy --> Electrical Energy --> Sound Energy
8. Mechanical Energy --> Sound Energy
Explanation:
This is a two part question: What is the force of friction acting on a 100 kg steel slab at rest on a steel floor?
None of the above
725.94N
559.2N
0N
A 5.5kg bowling ball is going down the lane at constant velocity of 30 m/s.What is the net force acting on the bowling ball?
165N
55N
30N
ON
convert one mean solar day into second
Answer:
86400 seconds
Explanation:
To convert a mean solar day to second :
Number of hours in a solar day = 24 hours
Number of minutes per hour = 60 minutes
Number of seconds per minute = 60 minutes
Hence, the number of seconds in a solar day is :
(Number of hours in a solar day * number of minutes in an hour * number of seconds in a minute)
(24 * 60 * 60) seconds = 86400 seconds
Hence, 1 mean solar day = 86400 seconds
To find motion and distance time graph which formula we have to use please tell.
Answer:
umm nobody can solve this without a picture of what it is......
Explanation:
Find the mass of an object the accelerates at 3.4 m/s2 when a net force of 25.1 N force is applied to it. Answer in units of kg and include all necessary work.
Help Please
Given,
Acceleration of the object = 3.4 m/s²Net force = 25.1 NWe need to find,
Mass of the body = ?Using Newton's first law of motion .
Force = Mass × Acceleration➵ 25.1 = Mass × 3.4
➵ 25.1 ÷ 3.4 = Mass
➵ Mass = 7.38 kg
A student is watching a video in order to understand how convection in the mantle of the Earth occurs. The video shows rock rising and sinking to make convection currents in the mantle. Which process is responsible for causing rock to rise? A. Rock is heated. B. Rock rapidly cools off. C. Rock increases in density. D. Rock undergoes intense pressure.
Answer:
A
Explanation:
Because of the convectional currents
A 10 kg wagon is accelerated by a constant force of 60 N from an initial velocity of 5.0 m/s to a final velocity of 11 m/s. What is the impulse received by the wagon? a)15 N s b)60 N s c)17 N s d)70 N s
Explain how to change the pitch of the sound produced by a violin string when it is plucked or rubbed with the bow.
Answer:
Sound is produced by moving the bow over the string or by plucking it with the right hand. Pitch alterations are achieved by pressing down the string with the fingertips of the left hand on the fingerboard. This shortens the vibrating portion of the string and raises the pitch
Explanation:
I have like 3 min !!!
Answer:
to talk??? i will talk with you
How much power does it take to do 1000 J of work in 8 seconds?
the great pyramid of khufu (giza, egypt) is about 140m tall. How much work would be required to raise an average - sized pyramid black (2.5 tons) to this height?
Please help in these 4 questions
Answer:
See the answers below.
Explanation:
1
The data of 100W means power, and the other data of 220V means voltage, that is to say that bulb serves to work at a voltage of 220V100W datum means power.
J means work that is given in Joules [J], we must remember that power is defined as the relationship between work at a certain time, therefore we can determine work by means of the following expression.
[tex]P=W/t\\[/tex]
where:
P = power [Watt]
W = work [J]
t = time [s]
[tex]W=P*t\\W=100*5[hr]*[\frac{3600s}{1hr} ]\\W=1800000[J] = 1.8[MJ][/tex]
Now the electric cost.
[tex]0.1[kW]*5[hr]*55\frac{LL}{1kwhr} =27.5[LL][/tex]
2
We know that power is defined as the product of voltage by resistance.
[tex]P=V*I[/tex]
where:
P = power [W]
V = voltage [V]
I = current [amp]
[tex]I=P/V\\I=1500/220\\I=6.82[amp][/tex]
3
The voltage can be calculated by means of ohm's law, which tells us that the voltage is equal to the product of resistance by the current.
[tex]V =I*R[/tex]
where:
V = voltage [V]
I = current = 20 [mA] = 0.02 [A]
R = resistance = 20 [kΩ] = 20000 [Ω]
Now replacing:
[tex]V = 0.02*20000\\V = 400 [V][/tex]
4
According to the figure we see that when the current is equal to 10 [mA] the voltage is equal to 1 [V]. With these two values, we can use ohm's law and find the value for the resistance.
[tex]V = I*R\\R = V/I\\R = 1/0.01\\R =100 [ohm][/tex]
The temperature of boiling water cannot be measured by alcohol
thermometer.
Answer:
It can be measured by using laboratory thermometer.
Give an example of the Law of Conservation of Energy. Explain your example
Answer: The law of conservation of energy can be seen in these everyday examples of energy transference: Water can produce electricity. Water falls from the sky, converting potential energy to kinetic energy. This energy is then used to rotate the turbine of a generator to produce electricity.
Explanation: Thats what we learned
b. The coefficient of friction between the tires and the road is 0.850 and the mass of the car is
1.35x10' kg. Draw the free body diagram of this situation and determine the applied force
that caused the acceleration from part a. (2 law: Fnet-ma)
Given:
u
בנו
Samt
g=9.8 m/s^2
am
(from part a)
Unknown:
Fapp = ?
Equation:
Fnet=ma
Fapp- umg=ma
Solution:
Answer:
156.26N
Explanation:
The data needed are incomplete. Let the acceleration of the body be 3.5m/s²
Other given parameters
Mass = 1.35×10^1 = 13.5kg
coefficient of friction between the tires and the road = 0.850
Acceleration due to gravity = 9.8m/s²
According to Newton's second law:
Fnet = ma
Fnet = Fapp - Ff
Fapp is the applied force
Ff is the frictional force = umg
The equation becomes:
Fapp - Ff = ma
Fapp-umg = ma
Fapp - 0.85(13.5)(9.8) = 13.5(3.5)
Fapp - 109.0125 = 47.25
Fapp = 47.25+109.0125
Fapp = 156.2625N
Hence the applied force that caused the acceleration is 156.26N
Note that the acceleration of the car was assumed. Any value of acceleration can be used for the calculation.
An astronaut and his space suit have a combined mass of 157 kg. The
astronaut is using a 5 kg tqol kit to repair a solar panel on the International
Space Station. When the têther connecting the astronaut to the space
station becomes unattached, the astronaut, still holding the tool kit, starts
to float away at 0.2 m/s. Calculate the velocity with which the astronaut
must throw the tool kit in order to float back toward the space station at
0.1 m/s. Show your calculations and include units in your answer.
*
Answer:
v₃ = 9.62[m/s]
Explanation:
To solve this type of problem we must use the principle of conservation of linear momentum, which tells us that the momentum is equal to the product of mass by velocity.
We must analyze the moment when the astronaut launches the toolkit, the before and after. In order to return to the ship, the astronaut must launch the toolkit in the opposite direction to the movement.
Let's take the leftward movement as negative, which is when the astronaut moves away from the ship, and rightward as positive, which is when he approaches the ship.
In this way, we can construct the following equation.
[tex]-(m_{1}+m_{2})*v_{1}=(m_{1}*v_{2})-(m_{2}*v_{3})[/tex]
where:
m₁ = mass of the astronaut = 157 [kg]
m₂ = mass of the toolkit = 5 [kg]
v₁ = velocity combined of the astronaut and the toolkit before throwing the toolkit = 0.2 [m/s]
v₂ = velocity for returning back to the ship after throwing the toolkit [m/s]
v₃ = velocity at which the toolkit should be thrown [m/s]
Now replacing:
[tex]-(157+5)*0.2=(157*0.1)-(5*v_{3})\\(5*v_{3})= 15.7+32.4\\v_{3}=9.62[m/s][/tex]
The velocity with which the astronaut must throw the tool kit is 9.62 m/s.
The given parameters:
Mass of the astronaut and space suit, m₁ = 157 kgMass of the tool kit, m₂ = 5 kgVelocity of the astronaut and tool kit, v = 0.2 m/sVelocity of the astronaut and space station, u₁ = -0.1 m/sApply the principle of conservation of linear momentum to determine the velocity of the tool kit;
[tex]m_1 u_1 + m_2u_2 = v(m_1 + m_2)\\\\-0.1(157) \ + 5u_2 = 0.2(157 + 5) \\\\-15.7 + 5u_2 = 32.4\\\\5u_2 = 32.4 + 15.7\\\\5u_2 = 48.1\\\\u_2 = \frac{48.1}{5} \\\\u_2 = 9.62 \ m/s[/tex]
Thus, the velocity with which the astronaut must throw the tool kit is 9.62 m/s.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
A girl delivering newspapers covers her route by traveling 3.00 blocks west, 4.00 blocks north, and then 6.00 blocks east. What is the total distance she travels?
Answer:
13 blocks
Explanation:
The total distance the student travels is 13 blocks.
Distance is the length of path covered during the motion of a body.
To find distance:
Total distance = Number of blocks to the west + number of blocks to the north + number of blocks to the east
Total distance = 3blocks + 4blocks + 6blocks = 13blocks
What is Newton's third law of motion? Give an example.
Answer: Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies and equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
Explanation: hope this helps :)
Calculate the momentum of a 78 kg cheetah running at 24 m/s.
Answer:
1872 kg.m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 78 × 24
We have the final answer as
1872 kg.m/sHope this helps you
Which diagram best illustrates what happens when electromagnetic waves strike a reflective material?
Answer:
The second diagram does that
The last diagram below represents what happenes when electromagnetic waves strike a reflective material. The last diagram is showed in the image below.
Why does your weight change on the moon
Answer:
the moon has different gravitational force.
Answer:
Our weight on moon is less than it would be on Earth due to a difference of the strength of gravity on the moon. The moon's gravitation force is determined by the mass and the size of the moon. ... This means that if you went to the moon you would weigh less, even though your mass stays the same!
Explanation:
Please mark brainliest
3. Reducing the distance between two objects to 1/2 its original value will
a. Make the gravitational force between the objects twice its original value,
B. Make the gravitational force between the objects 1/4 of its original value,
C) Make the gravitational force between the objects 4 times its original value,
D. Make the gravitational force between the objects of its 1/2 original value,
Answer:
i my though may it is auestion no B i am not correct may its write
Explanation:
B
How does a single fixed pulley, like the one seen here, help you do work?
A) Changes the direction of the force.
B) Increases the amount of applied force.
C) Decreases the amount of applied force.
D) Allows you to pull the rope a shorter distance.
Answer:
the answer will be B
Explanation:
because you are pulling the rope, pullimg applies FORCE. the bucket goes up because you applied FORCE
help please 10 pts and quick!
Answer:
B
Explanation:
Answer:
B
Explanation: