Por definición de molaridad y densidad, la molaridad de la solución es 1.66 [tex]\frac{moles}{litros}[/tex].
La concentración molar o molaridad es una medida de la concentración de un soluto en una disolución que indica el número de moles de soluto que están disueltos en un determinado volumen.
La molaridad de una solución se calcula dividiendo los moles del soluto por el volumen de la solución:
[tex]Molaridad=\frac{numero de moles de soluto}{volumen}[/tex]
La Molaridad se expresa en las unidades [tex]\frac{moles}{litros}[/tex].
Por otro lado, la densidad es una magnitud que permite medir la cantidad de masa que hay en determinado volumen de una sustancia.
Entonces, la expresión para el cálculo de la densidad es el cociente entre la masa de un cuerpo y el volumen que ocupa:
[tex]densidad=\frac{masa}{volumen}[/tex]
En este caso, siendo H₂S el soluto, se colocaron 37 ml del ácido, siendo su densidad 1.36 [tex]\frac{g}{mL}[/tex]. Reemplazando en la definición de densidad se obtiene:
[tex]1.36\frac{g}{mL}=\frac{masa}{37 mL}[/tex]
masa= 1.36 [tex]\frac{g}{mL}[/tex]× 37 mL
masa= 50.32 g
Siendo 34 g/mol la masa molar de H₂S, es decir la cantidad de masa que una sustancia contiene en un mol, la cantidad de moles de H₂S puede ser calculada como:
[tex]numero de moles de H_{2}S= 50.32 grams\frac{1 mole}{34 grams}[/tex]
número de moles de H₂S= 1.48 moles
Siendo 890 mL=0.890 L el volumen de la solución, entonces la molaridad puede ser calculada como:
[tex]Molaridad=\frac{1.48 moles}{0.890 L}[/tex]
Molaridad= 1.66 [tex]\frac{moles}{litros}[/tex]
Finalmente, la molaridad de la solución es 1.66 [tex]\frac{moles}{litros}[/tex].
Aprende más:
https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResultsHow could the student obtain zinc chloride solution from the reaction mixture when all the hydrochloric acid has reacted?
Answer:
zinc oxide is only sparingly soluble in water so best option is to add zinc oxide to diluted hydrocrolic acid
When all the hydrochloric acid (HCl) has reacted, the student can obtain zinc chloride (ZnCl) solution from the reaction mixture by adding ZnO to diluted HCl.
What is a mixture?
A mixture simply refers to a combination of two (2) or more substances or chemical compounds that are present in varied proportion, and they can be visibly seen with na-ked eyes.
In this scenario, the student can obtain zinc chloride (ZnCl) solution from the reaction mixture when all the hydrochloric acid (HCl) has reacted by adding zinc oxide (ZnO) to diluted hydrochloric acid (HCl) because it's sparingly soluble in water.
Read more on mixture here: https://brainly.com/question/24647756
#SPJ2
identify ALL equations that involve Pressure(Minimum 2)
Answer:
p=F/A.Explanation:
What is the theoretical yield of sodium chloride when 8.3 g of sodium is reacted with 4.5 g of chlorine? 2Na(s) + Cl2(g) → 2NaCl(s)
The theoretical yield of sodium chloride when 8.3 g of sodium react with 4.5 g of chlorine is 3.30 g
We'll begin calculating the masses of Na and Cl that reacted and the mass of NaCl produced from the balanced equation.
2Na + Cl₂ —> 2NaClMolar mass of Na = 23 g/mol
Mass of Na from the balanced equation = 2 × 23 = 46 g
Molar mass of Cl₂ = 2 × 35.5 = 71 g/mol
Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g
Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol
Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g
SUMMARY
From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂ to produce 117 g of NaCl
Next, we shall determine the limiting reactant.From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂
Therefore,
8.3 g of Na will react with = (8.3 × 71)/46 = 12.81 g of Cl₂
From the calculation made above, we can see that a higher amount (i.e 12.81 g) of Cl₂ than what was given (i.e 4.5 g) is needed to react completely with 8.3 g of Na.
Therefore, Cl₂ is the limiting reactant and Na is the excess reactant
Finally, we shall determine the theoretical yield of NaCl by using the limiting reactant (i.e Cl₂)From the balanced equation above,
71 g of Cl₂ reacted to produce 117 g of NaCl.
Therefore,
4.5 g of Cl₂ will react to produce = (4.5 × 117)/71 = 3.30 g of NaCl
Thus, the theoretical yield of NaCl produced is 3.30 g
Learn more: https://brainly.com/question/25669079
Answer:
The correct answer is 7.4 g NaCl
Explanation:
is this correct? ...
is isopropyl alcohol the same as hydrogen peroxide
Answer:
Unlike isopropanol, hydrogen peroxide is not a type of alcohol. You might recognize its chemical formula, H2O2, as being similar to that of water (H2O). The difference is that hydrogen peroxide has two oxygen atoms instead of one. That one extra oxygen atom makes it a strong oxidizer.
Unless otherwise instructed, you may use the periodic table in the Chemistry:
question.
What is the molar mass of ammonia (NH,)?
o 15 g/mol
o 17 g/mol
42 g/mol
43 g/mol
Answer:
17 g/Mol
Explanation:
To determine the molar mass of any compound, you have to add up the molar masses of every atom that make up the respective compound. In this case NH3 equals one nitrogen atom and three hydrogen atoms.
What does that mean? Ammonia's molar mass will be the sum of the molar mass of one nitrogen atom and 3 times the molar mass of a hydrogen atom.
Peroindic table:
N=14.0067 g/mol.
H=1.00794 g/mol
How do you produce a buffer.
Answer:
Buffers can be made from weak acids or base and their salts.
Explanation:
hope this helps!
(if not tell me in the comments and i will try to help you!)
Answer:
Buffers are made by adding a strong acid or base to a weak acid or base.
Explanation:
26 Milkweed contains a poison known as cardenolides. Monarch butterflies eat the milkweed plant and hold on to this toxic compound. The
chemical formula for cardenolides is shown below.
CH18C20H15CHCO2
Problem
How many atoms of each element are in one molecule of cardenolides?
A
42 carbon atoms, 23 hydrogen atoms, and 2 oxygen atoms
B
20 carbon atoms, 33 hydrogen atoms, and 2 oxygen atoms
с
34 carbon atoms, 43 hydrogen atoms, and 2 oxygen atoms
D
23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms
please help ASAP !!
Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms.
Milkweed contains a poison known as cardenolides. The chemical formula for cardenolides CH₁₈C₂₀H₁₅CHCO₂.
The subscripts in the formula represent the atomicities, that is the number of atoms of each element in each part of the formula.
We can calculate the total number of atoms of each element by adding its atomicities.
Carbon atoms[tex]C = 1 + 20 + 1 + 1 = 23[/tex]
Hydrogen atoms[tex]H = 18 + 15 + 1 = 34[/tex]
Oxygen atoms[tex]O = 2[/tex]
Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms
Learn more: https://brainly.com/question/13348838
measuring the isotopic composition of atmospheric co2 shows that the burning of fossil fuels has led to _____ co2 levels over the last 200 years.
Answer:
measuring the isotopic composition of atmospheric co2 shows that the burning of fossil fuels has led to the co2 levels over the last 200 years.
Explanation:
pa brainliest po ty
Which of these figures correctly illustrates the nature of the bonding of h2o?.
H2O is composed of two hydrogen atoms and one oxygen atom. The central oxygen atom is sp3 hybridized.
H2O is composed of two hydrogen atoms and one oxygen atom. The oxygen atom is bonded to the two hydrogen atoms at a dihedral angle of 104°. There are two lone pairs on the oxygen atom. The molecule has a bent geometry.
The structure of H2O is shown in the image attached to this answer. The central oxygen atom is sp3 hybridized and the shape of the molecule is based on a tetrahedron owing to its electron pair geometry.
Learn more: https://brainly.com/question/967776
Use the periodic table to identify the number of core electrons and the number of valence electrons in each case below.
Can you please add a picture of the case??
Batteries allow us to store energy for when it’s needed, such as starting a car engine or jump-starting another car whose battery has lost its charge. But batteries cannot operate without chemical reactions. What kind of energy do you think is stored in the substances within the battery?
Answer:
Chemical energy
Explanation:
I hope this helped you!
Batteries store the energy in the form of chemical energy that chemical energy is converted into electrical energy. Chemical energy is used to stored in the substances within battery.
What is electrochemical energy ?The conversion of chemical energy into electrical energy or vice versa is called as electrochemical energy . This includes reactions transferring electrons, redox reactions .
Redox reaction in which reduction and oxidation takes place simultaneously. Reduction, when a substance receives one electron. Oxidation when a substance gives away one electron.
A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit.
Thus, chemical energy is used to store in the substance within battery.
To learn more about electrochemical energy refer the link below;
https://brainly.com/question/25551241
#SPJ2
what is the function of the digestive system? why is it important to the body?
The digestive system is made up of the gastrointestinal tract—also called the GI tract or digestive tract—and the liver, pancreas, and gallbladder. The GI tract is a series of hollow organs joined in a long, twisting tube from the mouth to the anus. The hollow organs that make up the GI tract are the mouth, esophagus, stomach, small intestine, large intestine, and anus. The liver, pancreas, and gallbladder are the solid organs of the digestive system.
The small intestine has three parts. The first part is called the duodenum. The jejunum is in the middle and the ileum is at the end. The large intestine includes the appendix, cecum, colon, and rectum. The appendix is a finger-shaped pouch attached to the cecum. The cecum is the first part of the large intestine. The colon is next. The rectum is the end of the large intestine.
Digestion is important because your body needs nutrients from food and drink to work properly and stay healthy. Proteins, fats, carbohydrates, vitamins NIH external link, minerals NIH external link, and water are nutrients. Your digestive system breaks nutrients into parts small enough for your body to absorb and use for energy, growth, and cell repair.
Proteins break into amino acidsFats break into fatty acids and glycerolCarbohydrates break into simple sugarsEach part of your digestive system helps to move food and liquid through your GI tract, break food and liquid into smaller parts, or both. Once foods are broken into small enough parts, your body can absorb and move the nutrients to where they are needed. Your large intestine absorbs water, and the waste products of digestion become stool. Nerves and hormones help control the digestive process.
what is the ka for 0.03M Solution of HClO4 for 1.90 PH value.
A) 7.2x10^-3
B) 8.27x10^-3
C) 8.27x10^-4
D) 6.27x10^-4
(I keep getting 5x10^-3 when I round all the values to 2 decimal places but it’s not in the options)
What is the molar mass of an unknown gas with a density of 3.35 g/L at 1.00 atm and 25.0 °C
Answer:
[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]
[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]
[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]
[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]
[tex]\implies \sf 998.3= 12\times M[/tex]
[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]
[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]
Solutions
Which statement is true of pure substance
1. They may contain one type of atom or one type of molecules.
2.they can only contain one type of molecules.
3.they can contain different types of atoms and molecules.
4.they can only contain one type of atom
This is science btw
Answer:
4
Explanation:
cuz pure substance contain one type of atom,molecule,or cpd.
2 is true but it have wrong grammar,if it contain only one type it must be^^molecule^^
A sample of gas is at 78.0 oC. You want to change the volume of the gas from 1.60 L to 0.425 L under constant pressure. What must you do to the temperature of the gas
Answer:
the rule is V1/T1= V2/T2
so we convert the T1 from °c to kelvin
78+273.15= 351.15 k
1.60/351.15 = 0.425/T2
4.55 ×10-³ = 0.425/T2
then T2 = 93.40 kelvin
hence, we should decrease the temperature
HELP!!!
Water boils in an open pot at 100 °C, but in a pressure cooker it can boil at 116 °C.
Describe what happens to the gas particles inside the pressure cooker as the pressure increases.
Explain whether the diagram Francisco drew is correct for the water particles in an open pot at 100 °C as well as those in the pressure cooker at 116 °C.
Identify which water particles have more energy, those in the open pot or those in the pressure cooker.
Explain why Francisco should use a pressure cooker to warm the jars of vegetables. Include a description of the behavior of the gaseous and liquid particles in the pressure cooker in your explanation.
PLEASE GIVE ME AN ANSWER TO EACH ONE IF YOU CAN.
Answer:
A pressure cooker looks like a regular pot but has a modified lid that locks on over a rubber gasket to create a seal. The cooker works by raising the temperature of boiling water, thereby speeding up the time it takes to boil, braise, or steam. To use a pressure cooker, you put the food in the pot with some liquid-usually a minimum of 2 cups to build up sufficient steam pressure. Once the lid is locked in place and the cooker is set on high heat, steam develops in the pot and can’t escape. The trapped steam increases the atmospheric pressure inside the cooker by 15 pounds per square inch (psi), or 15 pounds above normal sea-level pressure. At that pressure, the boiling point of water is increased from 212°F to 250°F. This higher temperature is what cooks food faster. Once the cooker has reached full pressure, usually indicated by a gauge or pop-up rod on the lid, a release valve opens, letting out steam in a regulated flow to maintain a constant temperature inside the pot.
Explanation:
Que pasa si a una taza de arena le pongo espuma y lo agito por 10 minutos?
Answer:
Conversion of energy
Explanation:
Shaking the sand is a form of kinetic energy. The friction of the sand particles rubbing against each other converts the kinetic energy to heat energy. Some of the kinetic energy also converts into the energy of sound waves, which you can hear while you shake the sand.
Filling Air Bags Automobile air bags produce nitrogen gas from the reaction:
a. If 2.25 g of NaN3 reacts to fill an air bag, how much P–V work will the N2 do against an external pressure of 1.00 atm given that the density of nitrogen is 1.165 g/L at 20°C?
b. If the process releases 2.34 kJ of heat, what is ∆E for the system?
(a) The work done by the nitrogen against external pressure is 126.66 J.
(b) The change in the internal energy of the system is -2,466.66 J.
The given parameters:
Mass of the compound, = 2.25 gExternal pressure, P = 1.0 atm = 101325 PaDensity of Nitrogen gas, ρ = 1.165 g/LTemperature of the Nitrogen gas, T = 20⁰CThe molar mass of the given compound is calculated as follows;
NaN₃ = 23+ (14 x 3) = 65 g/mol
65 g -------------- 42
2.25 g ------------- ?
[tex]= \frac{2.25 \times 42}{65} \\\\= 1.45 \ g[/tex]
The volume of the nitrogen gas is calculated as follows;
[tex]\rho = \frac{m}{V} \\\\V = \frac{m}{\rho} \\\\V = \frac{1.45}{1.165} \\\\V = 1.25 \ L[/tex]
[tex]V = 0.00125 \ m^3[/tex]
The work done by the nitrogen against external pressure is calculated as follows;
[tex]W = PV\\\\W = 101325 \times 0.00125\\\\W = 126.66 \ J[/tex]
The change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;
[tex]\Delta E = Q - W\\\\\Delta E = (-2,340) - (126.66)\\\\\Delta E = -2,466.66 \ J[/tex]
Learn more about first law of thermodynamics here: https://brainly.com/question/2965070
Draw the alkyne formed when 1,1‑dichloro‑3‑methylbutane is treated with an excess of a strong base such as sodium amide. Omit byproducts. (give the neutralized alkyne product, not the acetylide salt. ).
This problem is asking for the major alkyne product that is formed when 1,1‑dichloro‑3‑methylbutane reacts with sodium amide (NaNH₂) ignoring any byproduct.
Thus, we can firstly say that such reaction of an alkyl halide with a strong base such as sodium amide is able to remove the halogen-based substituents and hence form insaturations in the form of double or triple bonds depending on the degree of substitution.
For instance, if one halogen substituent, then an alkene will be formed; but if two, then an alkyne (like this problem).
In such a way, as shown on the attached figure, the product will be 3-methylbutyne due to the loss of two chlorine substituents.
Learn more:
https://brainly.com/question/9620187https://brainly.com/question/14282000Silver, Chromium and Copper are these type of elements _____
Answer:
Group 11
Explanation:
Group 11, by modern IUPAC numbering, is a group of chemical elements in the periodic table, consisting of copper (Cu), silver (Ag), and gold (Au).
Answer:
silver, chromium and copper are metal type of element
A student conducts an experiment to separate water into hydrogen and oxygen through a chemical reaction as shown below.
H Hydrogen gas Orygengu rises in this test tube test tube.
2 H2O --> 2H2 + O2
As a result the student collects 28.0 g of hydrogen and 224.0 g of oxygen. How many grams of water did the student originally start with?
The amount, in grams, of water, that the student originally started with would be 252 g
From the balanced equation of the reaction, the ratio of H2O to H2 is 1:1. Thus for every 1 mole of water that is separated, 1 mole of H2 is produced.
Recall that: mole = mass/molar mass
Mole of 28.0 g H2 produced = 28/2
= 14 moles
Equivalent mole of H2O would, therefore, be 14 moles.
Mass of 14 moles H2O = mole x molar mass
= 14 x 18
= 252 g
More on stoichiometric calculation can be found here: https://brainly.com/question/8062886?referrer=searchResults
(i will give brainliest)
The following image shows what happens when the particles in a certain state occupy a space. What is the state of the substance that is occupying the space and how do you know?
A. The substance is a gas because the particles are spreading out to fill the space of the container.
B. The substance is a liquid because the particles inside are taking the shape of the container.
C. The substance is a mixture of a gas and a liquid because the particles are filling the space of the container.
D. The substance is a solid because the particles inside the box have a definite shape.
Answer:
A
Explanation:
The substance is a gas because the particles far randomly arranged and far apart from each other. This happens because when a substance is a gas, particles have weak attraction to each but a lot more kinetic energy which means the they move around all the time spreading out to fill the container. If it was a solid, then all the particles would be very close together and have a fixed position and if it was a liquid then the particles would be fairly close and moving around each other but as we can see in the diagram, all the particles are far apart confirming that it is a gas.
Answer:
the answer is A beacause the other person is right :)
Explanation:
please give them brainliest
what chemical properties does soap have that makes it a good cleaning agent?
Answer:
Soap is an excellent cleanser because of its ability to act as an emulsifying agent. An emulsifier is capable of dispersing one liquid into another immiscible liquid. This means that while oil (which attracts dirt) doesn't naturally mix with water, soap can suspend oil/dirt in such a way that it can be removed.
Soap acts as a cleaner because of its ability to act as an emulsifying agent. A soap molecule has a polar head and a nonpolar tail. Soap consists of a carbon chain where one end attracts oil and the other attracts water.
What is the cleaning action of soap?Most of dirt can be described as oily in nature as oil does not dissolve in water. The molecule of soap consists of sodium salts of long-chain carboxylic acids. In soaps, the chain of carbon atoms dissolves in the oil, and the ionic or polar end of the soap molecule dissolves in water.
The soap molecules produce structures known as micelles. In micelles, one end faces the oil droplet, and the other end which is ionic in nature faces outside. Therefore, soap can form an emulsion in water and supports in dissolving the dirt when we wash our clothes.
Soap can be described as a kind of molecule in which both ends have different properties. The hydrophilic end dissolves water and is attracted to it whereas the hydrophobic end is dissolved in hydrocarbons and is water repulsive in nature.
Learn more about cleaning action of soap, here:
https://brainly.com/question/29509623
#SPJ2
why does reducing solute particle size increase the speed at which the solute dissolves in water .
Because it has less surface area. This can be applied to something like cooking potatoes. Cooking a larger potato will take longer than a small potato.
what do you mean by blood pressure is 130 19 mm of HG
Answer:
Hypertension stage 1 is 130-139 mm of HG
Which liquid will evaporate more rapidly? Explain your answer in terms of intermolecular forces
acer
A sample of gaseous arsine (AsH3) in a 460 mL flask at 332 Torr and 223 K, is heated to 437 K, at which temperature arsine decom- poses to solid arsenic and hydrogen gas. The flask is then cooled to 273 K, at which tem- perature the pressure in the flask is 488 Torr. What percentage of arsine molecules have de- composed?
Answer in units of %.
Answer:
28/95 = 29.,5 % of Arsine decomposed
Explanation:A sample of gaseous arsine (AsH3) in a 460 mL flask at 332 Torr and 223 K, is heated to 437 K, at which temperature arsine decom- poses to solid arsenic and hydrogen gas. The flask is then cooled to 273 K, at which tem- perature the pressure in the flask is 488 Torr. What percentage of arsine molecules have de- composed?
Answer in units of %.
initial pressure 332 Torr initial volume 0.46 L initial temperature 223K
final pressure 488 Torr final volume 0.46 L final 273 K
Torr is 1/760 atm 332 torr = 0.437 atm 488 Torr =0.642 atm
PV = nRT so n=RT/PV
INITIAL n= 0.082 X 223/(0.437)(0.46) = 91 moles
final n= 0.082 X 273 / (.437)(488) = 105 moles
2AsH3----------> 2As + 3H2
x moles of Arsine decomposed to make 1.5 moles of H2
the final number of moles was
(91 -X)+ 1.5 X = 105 moles
91 + 0.5 X = 105
0.5 X = 14
X =28
CHECK
if 28 moles of Arsine , then the container would have
91 --28 + 1.5(28) = 91 +14 =105 check
so 28/95 = 29.,5 % of Arsine decomposed
Your answer
(quit)
polyalchemVirtuoso
Answer:
Explanation:
ADD YOUR ANSWER
Ask maryhobbs about this question...
New questions in Chemistry
in what area of the united states do the fewest people live
Read each step. Then put the steps in order from first to last. Write 1 for the first step, 2 for the second step and so on. 1. Fossils fuels are burn…
When unbalanced forces act on an object that is in motion, the object can: A. change speed, direction, or both. B. only change direction. C. only s…
What is the missing letter in H,J,K,L,M,N,O,P.? And what is the opposite of HATE.? And what is the opposite of ME.? Think about it -,-
what type of reaction is Fe(NO3)3 + 3LiOH = Fe(OH)3 + 3LiNO3
Please answer this quickly. the answers that you find online are not correct. I will mark brainliest if you get it right. NO SPAM!!!!For the reaction …
cuantos gramos de soluto son necesario para preparar 50 ml de Ca(NO3)2 al 4% (w/v)
Calculate the moles of O in 0.182 mole C6H14O. Calculate the number of H atoms in 0.182 mole C6H14O. Calculate the number of C atoms in 0.182 mole C…
When a sulfur atom and an oxygen atom bond to produce substance C, electrons are? a. delocalised b. shared c. transferred
What is oxidation state?
LOAD MORE
Previous
Next
Ask
What is the name of the zone of life on earth ?
a . atmosphere
b . biosphere
c . lithosphere
d . magnetosphere
Answer:
B. Biosphere
Explanation: