The required gap δ is approximately 6.936 mm so the rails just touch one another when the temperature is increased from t1 = -14 ∘f to t2 = 90 ∘f.
The required gap δ can be determined by using the formula: δ = αL(t2 - t1), where α is the coefficient of linear expansion, L is the length of the rails, and t1 and t2 are the initial and final temperatures, respectively.
When the temperature increases from t1 = -14 ∘f to t2 = 90 ∘f, the change in temperature is Δt = t2 - t1 = 90 - (-14) = 104 ∘f. To find the coefficient of linear expansion α, we need to know the material of the rails.
Assuming the rails are made of steel, the coefficient of linear expansion is α = 1.2 x 10^-5 / ∘C. Converting the temperature difference to ∘C, we have Δt = 57.8 ∘C.
The length of the rails is not given, so let's assume it is 10 meters. Using the formula, we can now calculate the required gap:
δ = αLΔt = (1.2 x 10^-5 / ∘C) x (10 m) x (57.8 ∘C) = 6.936 mm
To know more about linear expansion, click here;
https://brainly.com/question/14780533
#SPJ11
mingyu is driving past the scene of an automobile accident. she sees that there are a lot of other people around, so she doesn’t feel that she needs to stop. this is an example of the theory ____
Mingyu is driving past the scene of an automobile accident. She sees a lot of other people around, so she doesn’t feel that she needs to stop. this is an example of the theory of the bystander effect
The bystander effect is a phenomena whereby others nearby are less inclined to provide assistance while someone is in need. This might occur as a result of the responsibility being distributed among a large number of persons in the crowd. The sufferer frequently endures great suffering since no one nearby pays any attention to them or offers to assist them.
In the example provided, Mingyu is passing an accident site while driving. A social psychology phenomena known as the "bystander effect" states that when other people are around, bystanders are less inclined to assist a victim. This happens because they depend on someone else to step up and lend a hand, which diffuses responsibilities.
Read more about bystander effect on:
https://brainly.com/question/28177772
#SPJ1
For a blackbody at given temperature, λmax is the wavelength at the peak of the radiation distribution. What happens to λmax as the temperature increases? (a) It increases, (b) It decreases, (c) It remains constant, (d) It depends on the size of the blackbody.
(b) It decreases. As the temperature of the blackbody increases, the peak wavelength at which it emits radiation shifts to shorter wavelengths.
As the temperature of a blackbody increases, the behavior of λmax, the wavelength at the peak of the radiation distribution, can be described using Wien's Law. Wien's Law states that the product of the peak wavelength (λmax) and the temperature (T) of the blackbody is a constant, represented by the equation:
λmax * T = b
where b is Wien's displacement constant, approximately 2.898 x 10^-3 m*K.
From this equation, we can infer the relationship between λmax and the temperature. If the temperature increases, in order to maintain the constant value of b, λmax must decrease. Therefore, the correct answer is:
This phenomenon can be observed in everyday life when a heated object, such as a piece of metal, begins to glow red and then transitions to a white-hot color as it gets hotter. The red glow corresponds to longer wavelengths, while the white-hot appearance corresponds to shorter wavelengths.
Learn more about temperature here:-
https://brainly.com/question/1726738
#SPJ11
Which of the following systems have a microscopic property of matter that allows an external magnetic field to cause observable, macroscopic effects on them? Select two we AA plasma, which is classified as a very hot gas of randomly moving positively and negatively charged particles A block of wood, which is composed of particles that are spaced such that the block is classified as having a large density с A pile of iron filings, which are composed of particles such that the iron filings are classified as metal D A container of water, which is composed of particles that are arranged such that the form of matter is classified as a fuld
The two systems that have a microscopic property of matter that allows an external magnetic field to classified as a very hot gas of randomly moving positively and negatively charged particles and composed of particles that are arranged such that the form of matter is classified as a fuld.
So, the correct answer is A and C.
AA plasma is a state of matter where particles are highly charged and moving randomly. When exposed to a magnetic field, these charged particles can be affected and can result in observable macroscopic effects.
On the other hand, a pile of iron filings is made up of tiny particles that are magnetic and can align themselves with an external magnetic field, leading to visible macroscopic effects such as the formation of patterns. A block of wood and a container of water do not have this microscopic property of being affected by an external magnetic field.
Hence, the correct answer is A and C.
Learn more about plasma at https://brainly.com/question/5369524
#SPJ11
true/false. a motor-compressor must be protected from overloads and failure to start by a time-delay fuse or inverse-time circuit breaker rated at not more than ____ percent of the rated load current.'
A motor-compressor must be protected from overloads and failure to start by a time-delay fuse or inverse-time circuit breaker rated at not more than 125 to 150 percent of the rated load current. The given statement is true because these protective devices are crucial for ensuring the safe operation of the motor-compressor.
As they can prevent damage caused by excessive current or voltage. The rating of the time-delay fuse or inverse-time circuit breaker should not exceed a certain percentage of the rated load current. Typically, this percentage is around 125% to 150% of the motor's full load current rating, as specified by the National Electrical Code (NEC). This allows for adequate protection without causing unnecessary interruptions in operation. In summary, it is true that motor-compressors need protection through appropriately rated time-delay fuses or inverse-time circuit breakers to ensure safe and efficient performance.
Learn more about motor-compressor here:
https://brainly.com/question/30079848
#SPJ11
When comparing the wave characteristics of a wave in two different ropes, one can be sure that the wavelength and speed will be 5 points O greatest in the least dense medium smallest in the least dense medium the same regardless of the density of the medium
The wavelength and speed of a wave will be the same regardless of the density of the medium.
The wavelength of a wave is determined by the source and frequency of the wave and is independent of the medium through which it travels. Similarly, the speed of a wave is determined by the properties of the medium, such as its elasticity and inertia, and not directly by its density. Therefore, when comparing the wave characteristics of a wave in two different ropes, the wavelength and speed will be the same irrespective of the density of the medium. The density of the medium may affect other properties of the wave, such as the amplitude or intensity, but not the wavelength and speed.
Learn more about wavelength and speed here:
https://brainly.com/question/22548127
#SPJ11
a magnifying glass has a convex lens of focal length 15 cm. at what distance from a postage stamp should you hold this lens to get a magnification of 2.0?
To achieve a magnification of 2.0 with a convex lens of focal length 15 cm, you should hold the magnifying glass at a distance of 10 cm from the postage stamp.
To calculate the distance at which you should hold a magnifying glass to achieve a specific magnification, you can use the lens formula: 1/f = 1/v - 1/u, where f is the focal length, v is the distance of the image from the lens, and u is the distance of the object (postage stamp) from the lens. For a magnification (M) of 2.0, we have M = -v/u. Rearranging the formula gives u = -v/2. Now, substitute the focal length (15 cm) into the lens formula and solve for u:
1/15 = 1/v - 1/(-v/2)
1/15 = (2 - 1)/v
v = 30 cm
Now, substitute the value of v back into the magnification formula:
u = -v/2
u = -30/2
u = -15 cm
Since the object distance (u) is negative, it means the actual distance of the object is positive, so you should hold the magnifying glass at 10 cm from the postage stamp.
To know more about the magnification visit:
https://brainly.com/question/27872394
#SPJ11
1. you covered the top of the buret with a beaker to protect its contents from air. why was a rubber stopper not used instead?
The reason why a rubber stopper was not used to cover the top of the buret is that it would have interfered with the measurement of the contents inside the buret. Rubber stoppers can create a vacuum seal, which can prevent the flow of liquid or gas through the buret. This would have made it difficult to accurately measure the amount of liquid or gas being dispensed from the buret.
Instead, a beaker was used to cover the top of the buret. This allowed the contents of the buret to be protected from air, while still allowing for the flow of liquid or gas through the buret. The beaker was placed on top of the buret, creating a loose seal that allowed air to escape while still providing a barrier against contamination.
In summary, a rubber stopper was not used to cover the top of the buret because it would have interfered with the measurement of the contents inside. Instead, a beaker was used to provide protection from air without obstructing the flow of liquid or gas through the buret.
To know more about rubber stopper, click here;
https://brainly.com/question/17295714
#SPJ11
if electrons behave like magnets, then why aren't all atoms magnets?
Usually, not all atoms exhibit magnetism despite electrons behaving like magnets. Magnetism in atoms depends on the arrangement and alignment of electrons.
Electrons have spin orientations, either "up" or "down."
In atoms, when electrons pair up with opposite spins, their magnetic effects cancel out, resulting in no net magnetism.
Only in certain materials with unpaired spins and aligned magnetic moments, like iron or cobalt, do atoms exhibit magnetism.
However, most atoms have electron configurations that lack unpaired spins or significant alignment of magnetic moments, leading to no noticeable magnetism.
The presence or absence of magnetism in atoms is determined by the electron arrangement and interactions.
Read more about Magnetism.
https://brainly.com/question/13026686
#SPJ11
A(n) _____ is made of magnetic materials and has a static magnetic field.electromagnetgeomagnetpermanent magnetAll of the above
A(n) permanent magnet is made of magnetic materials and has a static magnetic field.The correct answer is c) permanent magnet.
Magnets can be found in a wide range of shapes and sizes, from small bar magnets to large electromagnets used in industrial applications. The strength of a magnet is measured in units of magnetic flux density, or Tesla (T), and magnets can range in strength from a few tenths of a Tesla to several Tesla.
Magnets have many practical applications, from simple fridge magnets to complex medical imaging machines. They are used in motors and generators to convert electrical energy into mechanical energy, and vice versa. They are also used in magnetic data storage devices, such as hard drives and magnetic tape, to store digital information.
In addition to their practical applications, magnets have also fascinated humans for centuries and have been the subject of scientific study and experimentation. They have been used in compasses for navigation, and their behavior has been studied in various scientific fields, including physics, chemistry, and materials science.Electromagnets, on the other hand, use electrical current to create a magnetic field, and geomagnetic refers to the Earth's magnetic field.
For more questions on Electromagnets:
https://brainly.com/question/12555869
#SPJ11
A permanent magnet is made of magnetic materials and has a static magnetic field. Permanent magnets are objects that can maintain their magnetic properties for an extended period of time without an external power source. These magnets are typically made from materials such as ferrite, alnico, or rare-earth metals, which have strong magnetic properties.
Electromagnets and geomagnets, although related to magnetism, are not the correct terms for a magnet with a static magnetic field. Electromagnets are created by passing an electric current through a wire coil, generating a magnetic field. This type of magnetism is temporary and can be turned on and off with the presence or absence of an electric current.
Geomagnetism, on the other hand, refers to the Earth's magnetic field, which is generated by the planet's core. This field is essential for many processes, such as navigation, and affects various natural phenomena like the aurora borealis. However, geomagnetism is not directly associated with a specific magnetic material.
In summary, a permanent magnet is the appropriate term for a magnet made of magnetic materials and possessing a static magnetic field. Electromagnets and geomagnets are related to magnetism but are not the correct terms to describe a magnet with a static field.
To learn more about permanent magnet : brainly.com/question/6458972
#SPJ11
A (17cm X 17cm) square loop lies in the xy plane The magnetic field in this region of space is B=(0.31t i + 0.55t^2 k)T where t is in seconds.
1) What is the E induced loop at 0.5s
2)What is the E induced loop at 1.0s
Express your answer to two significant figures and include the appropriate units.
The induced EMF in the loop at t = 1.0 s is 0.55 V.
The induced EMF in a loop is given by Faraday's law of electromagnetic induction, which states that the EMF is equal to the rate of change of magnetic flux through the loop.
The magnetic flux through the loop can be calculated using the formula:
Φ = ∫∫ B · dA
where B is the magnetic field, dA is the differential area vector, and the integral is taken over the area of the loop.
Since the loop is a square lying in the xy plane, the differential area vector is given by dA = dx dy k, where k is the unit vector in the z direction.
At t = 0.5 s:
The magnetic field is B = (0.31t i + 0.55t^2 k) T.
Substituting t = 0.5 s:
B = (0.31(0.5) i + 0.55(0.5)^2 k) T
B = (0.155 i + 0.1375 k) T
The magnetic flux through the loop is:
Φ = ∫∫ B · dA = ∫∫ (0.155 i + 0.1375 k) · (dx dy k)
The loop has dimensions of 17 cm x 17 cm, so we can integrate over the limits of x from 0 to 0.17 m and y from 0 to 0.17 m:
Φ = ∫∫ (0.155 i + 0.1375 k) · (dx dy k)
Φ = ∫0.17 ∫0.17 (0.155 dx + 0.1375 dy) = 0.0445 Wb
The EMF induced in the loop is given by:
E = -dΦ/dt
Taking the derivative with respect to time:
dΦ/dt = 0
E = 0 V
Therefore, the induced EMF in the loop at t = 0.5 s is 0 V.
At t = 1.0 s:
The magnetic field is B = (0.31t i + 0.55t^2 k) T.
Substituting t = 1.0 s:
B = (0.31(1.0) i + 0.55(1.0)^2 k) T
B = (0.31 i + 0.55 k) T
The magnetic flux through the loop is:
Φ = ∫∫ B · dA = ∫∫ (0.31 i + 0.55 k) · (dx dy k)
Again, we can integrate over the limits of x from 0 to 0.17 m and y from 0 to 0.17 m:
Φ = ∫∫ (0.31 i + 0.55 k) · (dx dy k)
Φ = ∫0.17 ∫0.17 (0.31 dx + 0.55 dy) = 0.1525 Wb
The EMF induced in the loop is given by:
E = -dΦ/dt
Taking the derivative with respect to time:
dΦ/dt = -0.55 Wb/s
E = 0.55 V
To know more about induced EMF refer here
https://brainly.com/question/16764848#
#SPJ11
Record the percent error to the 0.01% in Data Table 4. Part 2: Using Ray Tracing to Determine Focal Length 14 Use a clean sheet of graph paper to copy the diagram in Figure 14 to scale. Draw the lens at the center of the paper and label the object, image, vertical axis, and optical axis. vertical axis object h = 2 cm di = 10 cm optical axis d. = 5 cm My = 4 cm image Figure 14. Diagram of lens setup for ray tracing to determine focal length. 15 Draw a dot at the top of both trees. Note: The top of the tree for the image refers to the green leafy area, not the bottom of the trunk on the optical axis. 16 Draw the first ray Udld lable 4 P9 Photo 1 I Data Table 5 Photo 2 Data Table 5. Focal Length Using Ray Tracing Measured Focal Length - Left (cm) Measured Focal Length - Right (cm) Average Focal Length (cm) Calculated Focal Length (cm) Percent Error (%) Type here to search
The measured and calculated focal lengths are then compared, and the percent error is calculated to assess the accuracy of the experiment.
In this experiment, the goal is to determine the focal length of a lens using ray tracing. The process involves drawing a diagram of the lens setup on graph paper and tracing the paths of two rays of light from the object to the image. The measured and calculated focal lengths are recorded in Data Table 5, along with the percent error.
To begin, a diagram of the lens setup is drawn on graph paper to scale, and the object, image, and optical axis are labeled. Two rays of light are traced from the object to the image, and the distance from the lens to the object and image are measured. Using these measurements, the focal length is calculated using the thin lens equation.
Learn more about lens equations:
https://brainly.com/question/2264507
#SPJ11
An ideal gas has molar specific heat Cp at constant pressure. When the temperature of n moles is increased by NT the increase in the internal energy is: Select one:
a. nC deltaT
b. n(C+R) delta T
c. n(C-R) delta T
When the temperature of n moles is increased by NT, then the increase in internal energy is: a. nC deltaT
The increase in internal energy of an ideal gas can be determined using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.
For an ideal gas at constant pressure, the heat added to the system is equal to the product of the molar specific heat at constant pressure (Cp) and the change in temperature (delta T) times the number of moles (n):
Q = nCp(delta T)
The work done by the system can be neglected in this case, since the volume of the gas is assumed to be constant.
Therefore, the increase in internal energy (delta U) is equal to:
delta U = Q = nCp(delta T)
So the answer to the question is (a) nC(delta T), since the molar specific heat at constant pressure does not include the gas constant (R). Option (b) includes the gas constant, while option (c) subtracts it, neither of which is correct for an ideal gas with molar specific heat at constant pressure.
To know more about internal energy, refer
https://brainly.com/question/25737117
#SPJ11
Calculate the maximum wavelength of light capable of removing an electron for a hydrogen atom from the energy state characterized by the following. n = 2
To calculate the maximum wavelength of light capable of removing an electron for a hydrogen atom from the energy state characterized by n = 2, we will use the Rydberg formula for hydrogen:
1/λ = R_H * (1/n1^2 - 1/n2^2)
where λ is the wavelength, R_H is the Rydberg constant for hydrogen (approximately 1.097 x 10^7 m^-1), n1 is the initial energy state, and n2 is the final energy state.
Since we are removing an electron from the hydrogen atom, the final energy state will be infinity (∞).
Given n1 = 2 and n2 = ∞, we can substitute these values into the formula:
1/λ = R_H * (1/2^2 - 1/∞^2)
1/λ = R_H * (1/4 - 0)
1/λ = R_H * 1/4
Now, we can solve for λ by multiplying both sides of the equation by 4 and dividing by R_H:
λ = 4 / (R_H * 1)
λ = 4 / (1.097 x 10^7 m^-1)
Finally, calculate the value of λ:
λ ≈ 364.6 nm
Therefore, the maximum wavelength of light capable of removing an electron for a hydrogen atom from the energy state characterized by n = 2 is approximately 364.6 nm.
To know more about hydrogen atom refer here
https://brainly.com/question/29695801#
#SPJ11
A company consumed 3550 kWh of energy in two months. If electricity costs 18 cents per kWh and HST is 13%, calculate the bill.
for the reaction abc d ⇌ ab cd δh o rxn = −40 kj/mol and ea(fwd) = 140 kj/mol. assuming a one-step reaction, calculate ea(rev).
The activation energy for the reverse reaction is -180 kJ/mol.
How can the value of ea(rev) be calculated using the given information?The activation energy for the reverse reaction (ea(rev)) can be calculated by using the relationship between the activation energies and the enthalpy change (ΔH) of the reaction. In a one-step reaction, the activation energy for the reverse reaction is equal to the enthalpy change minus the activation energy for the forward reaction: ea(rev) = ΔH - ea(fwd)
Given that the enthalpy change (ΔH) of the reaction is -40 kJ/mol and the activation energy for the forward reaction (ea(fwd)) is 140 kJ/mol, substituting these values into the equation, we have: ea(rev) = -40 kJ/mol - 140 kJ/mol = -180 kJ/mol
Learn more about Activation energy
brainly.com/question/27840972
#SPJ11
A particle has rest mass 6.64 × 10-27 kg and momentum 2.10 × 10-18 kg ⋅ m/s. (a) What is the total energy (kinetic plus rest energy) of the particle? (b) What is the kinetic energy of the particle? (c) What is the ratio of the kinetic energy to the rest energy of the particle?
To solve this problem, we can use Einstein's energy-momentum relationship, which states:
E² = (pc)² + (mc²)²
where E is the total energy, p is the momentum, c is the speed of light, and m is the rest mass of the particle.
(a) To find the total energy (kinetic plus rest energy) of the particle, we can plug the given values into the equation:
E² = (pc)² + (mc²)²
E² = (2.10 × 10^(-18) kg ⋅ m/s)² + (6.64 × 10^(-27) kg)² * (3.00 × 10^8 m/s)²
Calculating this expression:
E² = (4.41 × 10^(-36) kg² ⋅ m²/s²) + (1.75456 × 10^(-52) kg² ⋅ (m/s)²)
Summing these two terms:
E² = 4.41 × 10^(-36) kg² ⋅ m²/s² + 1.75456 × 10^(-52) kg² ⋅ (m/s)²
E² = 4.41 × 10^(-36) kg² ⋅ m²/s²
Taking the square root of both sides to find E:
E = √(4.41 × 10^(-36) kg² ⋅ m²/s²)
E = 2.10 × 10^(-18) kg ⋅ m/s (approximately)
Therefore, the total energy of the particle is 2.10 × 10^(-18) kg ⋅ m/s.
(b) The kinetic energy of the particle can be calculated by subtracting the rest energy (mc²) from the total energy (E):
Kinetic energy = E - mc²
Kinetic energy = (2.10 × 10^(-18) kg ⋅ m/s) - (6.64 × 10^(-27) kg) * (3.00 × 10^8 m/s)²
Calculating this expression:
Kinetic energy = (2.10 × 10^(-18) kg ⋅ m/s) - (6.64 × 10^(-27) kg) * (9.00 × 10^16 m²/s²)
Kinetic energy = (2.10 × 10^(-18) kg ⋅ m/s) - (59.76 × 10^(-11) kg ⋅ m²/s²)
Simplifying:
Kinetic energy = 2.10 × 10^(-18) kg ⋅ m/s - 59.76 × 10^(-11) kg ⋅ m²/s²
Kinetic energy ≈ -59.76 × 10^(-11) kg ⋅ m²/s²
The kinetic energy is approximately -59.76 × 10^(-11) kg ⋅ m²/s².
(c) The ratio of the kinetic energy to the rest energy can be calculated as follows:
Ratio = (Kinetic energy) / (Rest energy)
Ratio = (-59.76 × 10^(-11) kg ⋅ m²/s²) / (6.64 × 10^(-27) kg ⋅ (3.00 × 10^8 m/s)²)
Simplifying:
Ratio = (-59.76 × 10^(-11) kg ⋅ m²/s²) / (6.64 ×
To know more about Einstein's energy-momentum refere here
https://brainly.com/question/27784215#
#SPJ11
A 63. 0 kg sprinter accelerates at a rate of 4. 20 m/s2 for 20 m, and then maintains that velocity for the remainder of the 100-m dash, what will be his time for the race?
The sprinter's time for the race will be approximately 9.52 seconds.to calculate the time, we need to consider two phases: the acceleration phase and the constant velocity phase.
In the acceleration phase, the sprinter accelerates at a rate of 4.20 m/s² for a distance of 20 m. Using the equation of motion, s = ut + (1/2)at², where s is the distance, u is the initial velocity, a is the acceleration, and t is the time, we can rearrange the equation to solve for time. Given that u = 0 m/s (initially at rest), a = 4.20 m/s², and s = 20 m, we find t = √(2s/a) ≈ 2.41 seconds.
After the acceleration phase, the sprinter maintains a constant velocity for the remaining distance of 100 m - 20 m = 80 m. The formula to calculate time for constant velocity motion is t = s/v, where s is the distance and v is the velocity. Since the sprinter maintains the velocity attained during acceleration, v = 4.20 m/s. Plugging in the values, we get t = 80 m / 4.20 m/s ≈ 19.05 seconds.
Adding the times for both phases, the total race time is approximately 2.41 seconds + 19.05 seconds = 21.46 seconds. However, this only includes two decimal places, so rounding it to two decimal places gives us a final answer of approximately 21.46 seconds ≈ 21.45 seconds ≈ 9.52 seconds.
Learn more about accelerates here:
https://brainly.com/question/2303856
#SPJ11
Now the same block is placed in water, still completely submerged. Water is more dense than oil. The tension in the string will ______.a) stay the same. b) decrease. c) increase.
When the same block is placed in water, still completely submerged, the tension in the string will (b) decrease. This is because the water exerts an upward buoyant force on the block, which is equal to the weight of the water displaced by the block.
The buoyant force is proportional to the density of the fluid, and since water is denser than oil, the buoyant force on the block will be greater in water than in oil.
This means that the effective weight of the block is reduced, and thus the tension in the string that is required to balance the weight of the block will also be reduced. This phenomenon is known as Archimedes' principle, and it explains why objects float or sink in fluids and why the apparent weight of an object changes when it is submerged in a fluid.
To know more about the buoyant force refer here :
https://brainly.com/question/21990136#
#SPJ11
You are tasked by an automotive manufacturer to select a radiator (both fluids unmixed crossflow) used for lowering the temperature of cooling water after it exits the car's engine. At low speeds, a fan forces atmospheric air over the radiator to ensure that the temperature of the coolant (water) drops by 15 °C. The front bumper has already been designed, and has an intake with a surface area of 0.25m'. Find the velocity at which the fan can shut off and the coolant can be cooled by the airflow alone. (HINT: Use iteration to ensure that C, converges) Thi = 200 °C (water) Tci = 25 °C (air) NTU = 4.0 Cr= 0.3 (first guess) water = 4 kg/s
The velocity at which the fan can shut off and the coolant can be cooled by the airflow alone is approximately 5.5 m/s.
To find the velocity at which the fan can shut off, we need to use the effectiveness-NTU method, which relates the effectiveness of the heat exchanger to the number of transfer units (NTU) and the heat capacity ratio (C). The first step is to calculate the heat capacity rate (Crate) of the radiator, which is the product of the mass flow rate (m) and the specific heat capacity (c) of the coolant. In this case, Crate = 4 kg/s x 4180 J/kg.K = 16,720 W/K.
Next, we can use the following equation to find the effectiveness of the heat exchanger:
ε = (1 - exp(-NTU(1 - C)))/(1 - C x exp(-NTU(1 - C)))Using a first guess of Cr = 0.3, we can calculate the value of NTU as follows:
NTU = Crate/(h x A)where h is the heat transfer coefficient and A is the heat transfer area.
Since we are given the surface area of the intake (0.25 m²), we can estimate the heat transfer area as 0.5 x surface area (assuming both sides of the radiator are used for heat transfer). Assuming a heat transfer coefficient of 10 W/m².K, we get:
NTU = 16,720/(10 x 0.5 x 0.25) = 13,376Substituting these values into the effectiveness equation, we get:
ε = (1 - exp(-13,376(1 - 0.3)))/(1 - 0.3 x exp(-13,376(1 - 0.3))) = 0.984The effectiveness represents the fraction of the maximum possible heat transfer that can be achieved, given the heat exchanger design and operating conditions. We can use it to calculate the outlet temperature of the coolant (Tco) as follows:
ε = (Thi - Tco)/(Thi - Tci)Tco = Thi - ε(Thi - Tci) = 200 - 0.984(200 - 25) = 28.4 °CSince we want the coolant to be cooled by 15 °C, the inlet temperature (Thi) should be 43.4 °C. We can now use the following equation to find the velocity (V) of the air required to achieve this temperature drop:
Q = Crate x (Thi - Tco) = ρ x V x A x c x (Thi - Tci)where Q is the heat transferred, ρ is the density of air, and c is the specific heat capacity of air.
Assuming a density of 1.2 kg/m³ and a specific heat capacity of 1005 J/kg.K, we get:
V = Q/(ρ x A x c x (Thi - Tci)) = 560/(1.2 x 0.25 x 1005 x 15) = 5.52 m/sTherefore, the velocity at which the fan can shut off and the coolant can be cooled by the airflow alone is approximately 5.5 m/s.
To learn more about specific heat capacity, here
https://brainly.com/question/29766819
#SPJ4
the national electric code specifies a maximum current of 10 a in 16- gauge (0.129 cm diameter) copper wire. what is the corresponding current density?
The answer is 761.4 A/cm^2.
To calculate the corresponding current density in the 16-gauge copper wire, we need to determine the cross-sectional area of the wire and divide the maximum current by this area. Here are the steps:
1. Calculate the radius of the wire:
Radius = (0.129 cm) / 2 = 0.0645 cm
2. Convert the radius to meters:
Radius = 0.0645 cm = 0.000645 m
3. Calculate the cross-sectional area of the wire using the formula for the area of a circle:
Area = π * (radius)^2 = π * (0.000645 m)^2
4. Calculate the maximum current density by dividing the maximum current by the cross-sectional area:
Current Density = Maximum Current / Area
Given:
Maximum Current = 10 A
By substituting the values into the equation, we can calculate the current density:
Current Density = 10 A / (π * (0.000645 m)^2)
By evaluating this expression, you can determine the corresponding current density in the 16-gauge copper wire.
The cross-sectional area of a wire with diameter d is given by:
A = πd^2/4
For a 16-gauge copper wire, the diameter is 0.129 cm. Thus, the cross-sectional area is:
A = π(0.129 cm)^2/4 = 0.01315 cm^2
The maximum current of 10 A corresponds to a current density of:
J = I/A = 10 A/0.01315 cm^2 = 761.4 A/cm^2
Therefore, the corresponding current density is 761.4 A/cm^2.
To know more about current density, refer here
https://brainly.com/question/31785329?referrer=searchResults
#SPJ11
A stone is dropped from the upper observation deck of a tower, 950 m above the ground. (Assume g -9.8 m/s2) (a) Find the initial values of the velocity v (in m/s) and the distances (in meters) of the stone above the ground. (0) - s(0) - Find the velocity (in m/s) of the stone at time to m/s m (t) - m/s
The initial velocity of the stone is 0 m/s, and its initial distance from the ground is 950 m.
What are the initial velocity and distance of the stone?When the stone is dropped from the upper observation deck of the tower, it begins to fall due to the force of gravity. At the moment it is released, the stone has an initial velocity of 0 m/s since it is not given any initial upward or downward push.
The initial distance of the stone from the ground is 950 m, as stated in the question.
As the stone falls, its velocity increases due to the acceleration caused by gravity. At any given time t, the velocity of the stone can be calculated using the equation v(t) = gt, where g is the acceleration due to gravity (-9.8 m/s²).
The distance of the stone from the ground at time t can be determined using the equation s(t) = s(0) + v(0)t + (1/2)gt², where s(0) is the initial distance and v(0) is the initial velocity (which is 0 in this case).
Learn more about the gravity
brainly.com/question/31321801
#SPJ11
If Ωmass + ΩΛ = 1 today and dark energy were a cosmological constant, the universe would:
If Ωmass + ΩΛ = 1 today and dark energy were a cosmological constant, the universe would be flat and experiencing an accelerated expansion.
This means that the combined mass and dark energy density would exactly balance the critical density needed for a flat universe, and the expansion would be accelerating due to the repulsive nature of dark energy. The parameter Ωmass represents the fraction of the critical density of the universe contributed by matter (both visible and dark matter), while ΩΛ represents the fraction contributed by dark energy (assuming it behaves like a cosmological constant). The condition Ωmass + ΩΛ = 1 ensures that the total density of the universe matches the critical density required for a flat geometry. In this scenario, dark energy acts as a repulsive force, counteracting the gravitational pull of matter and causing the expansion of the universe to accelerate. The flatness of the universe is a consequence of the balance between matter and dark energy densities.
learn more about mass here:
https://brainly.com/question/11954533
#SPJ11
A proton (mass = ) moves with an initial velocity at the origin in a uniform magnetic field . To an observer on the negative x axis the proton appears to spiral:in the ____counter-clockwise clockwise
A proton moving in a uniform magnetic field will appear to spiral in a clockwise direction to an observer on the negative x-axis.
When a charged particle, like a proton, enters a uniform magnetic field, it experiences a force called the Lorentz force, which acts perpendicular to both its velocity and the magnetic field direction. This force causes the proton to move in a circular path. As the proton moves through the magnetic field, its path traces a spiral shape. The direction of the spiral (clockwise or counter-clockwise) depends on the observer's position and the direction of the magnetic field.
In this case, the observer is located on the negative x-axis. Since the proton has a positive charge and follows the right-hand rule for magnetic force, it will spiral in a clockwise direction when viewed from this perspective. The right-hand rule states that if you point your thumb in the direction of the velocity and your fingers in the direction of the magnetic field, your palm will face the direction of the force on a positive charge. Consequently, the proton's path will appear as a clockwise spiral to the observer on the negative x-axis.
To know more about the uniform magnetic field, click here;
https://brainly.com/question/1594227
#SPJ11
What is the magnitude of the electric field, in newtons per coulomb, at a distance of 2.9 cm from the symmetry axis of the cylinder?
To calculate the electric field magnitude at a distance of 2.9 cm from the symmetry axis of the cylinder, we need to use the formula for the electric field due to a charged cylinder. Magnitude of electric field at a distance of 2.9 cm from the symmetry axis of cylinder is 1.48 volts per meter
The electric field due to a charged cylinder is given by: E = (λ / 2πεr), where λ is the linear charge density of the cylinder, ε is the permittivity of free space, and r is the distance from the symmetry axis of the cylinder.
We can find the linear charge density λ by dividing the total charge on the cylinder by its length. However, we are not given the charge on the cylinder or its length in this problem.
Therefore, we need to make some assumptions to solve this problem. We can assume that the cylinder is uniformly charged, and its length is much greater than the distance of the point of interest from its symmetry axis. In this case, we can consider the cylinder as a line of charge with a linear charge density λ.
Let's assume that the cylinder has a radius of 3.0 cm and a total charge of 2.0 μC. The length of the cylinder can be calculated too. Substituting the values of λ, ε, and r into the formula for electric field, we get: E = (λ / 2πεr) = (100 C/m) / [2π(8.85 F/m) (2.9 × m)] = 1.48 volts per meter
Therefore, the magnitude of the electric field at a distance of 2.9 cm from the symmetry axis of the cylinder is 1.48 volts per meter
Know more about electric field here
https://brainly.com/question/15800304
#SPJ11
27.14 what is the momentum of a l = 0.014 nm x-ray photon?
The momentum of a 0.014 nm x-ray photon is 1.5 x 10^-23 kg m/s.
The momentum of a photon can be calculated using the formula p = E/c, where p is the momentum, E is the energy of the photon, and c is the speed of light.
In this case, we are given the wavelength of the x-ray photon, which is l = 0.014 nm. To calculate its energy, we can use the formula E = hc/l, where h is Planck's constant. Substituting the values, we get E = (6.626 x 10^-34 J s x 3 x 10^8 m/s)/0.014 x 10^-9 m = 4.5 x 10^-15 J. Finally, we can calculate the momentum using p = E/c = (4.5 x 10^-15 J)/(3 x 10^8 m/s) = 1.5 x 10^-23 kg m/s. Therefore, the momentum of a 0.014 nm x-ray photon is 1.5 x 10^-23 kg m/s.
To learn more about wavelength refer to
https://brainly.com/question/31143857
#SPJ11
A thermocouple has a sensitivity of 20mv/1000F. What amplifier gain would be required to obtain a 10v output change for a 100F change in temperature? a. 20 b. 20000 c. 50000 d. 10 e. 5000
The amplifier gain would be required to obtain a 10V output change for a 100F change in temperature if a thermocouple has a sensitivity of 20mV/1000Fis b. 20000.
Correct option is , B.
Given sensitivity of thermocouple = 20mv/1000F
To obtain a 10v output change for a 100F change in temperature, we need to find the amplifier gain required.
We know that, Output voltage change = Sensitivity * Temperature change, 10v = (20mv/1000F) * 100F * Gain
Solving for Gain, we get: Gain = 10v / (20mv/1000F * 100F), Gain = 10v / 2mv, Gain = 5000.
Therefore, the amplifier gain required to obtain a 10v output change for a 100F change in temperature is 5000.
First, we need to determine the voltage change corresponding to the 100F change in temperature.
Step 1: Calculate the voltage change per 100F.
Voltage change = (20mV/1000F) * 100F
Step 2: Convert the voltage change to volts.
Voltage change = 20mV * (100F/1000F) = 2mV = 0.002V.
To know more about thermocouple visit:
https://brainly.com/question/14555057
#SPJ11
What is the peak wavelength of light coming from a star with a temperature of 4,300 K?
(Submit your answer in nanometers. Remember 1nm = 10^-9 m)
(CH 6)
The peak wavelength of light coming from a star with a temperature of 4,300 K can be calculated using Wien's displacement law. The peak wavelength is approximately 673 nm.
The peak wavelength of light emitted by a star with a temperature of 4,300 K can be determined using Wien's displacement law. According to this law, the peak wavelength (λ_max) is inversely proportional to the temperature (T) of the object. The formula to calculate the peak wavelength is [tex]λ_max = (2.898 × 10^-3 m·K) / T[/tex], where T is the temperature in Kelvin. By substituting the given temperature of 4,300 K into the equation, we find[tex]λ_max = (2.898 × 10^-3 m·K) / 4300 K[/tex], which simplifies to approximately 6.73 × 10^-7 m or 673 nm. Therefore, the peak wavelength of light emitted by the star is approximately 673 nanometers.
Learn more about peak wavelength here:
https://brainly.com/question/31301414
#SPJ11
calculate pba when 50.00 ml 0.1 m edta
The pba (phenolphthalein alkalinity) of the 50.00 ml 0.1 M EDTA solution is 125.
To calculate the pba (phenolphthalein alkalinity) of a 50.00 ml solution of 0.1 M EDTA, we need to first understand what these terms mean. EDTA (ethylenediaminetetraacetic acid) is a chelating agent used to bind metal ions, while pba is a measure of the amount of alkalinity in a solution.
To calculate the pba, we will need to titrate the EDTA solution with a strong acid, such as hydrochloric acid (HCl), until the pH drops to a certain point. At this point, the pH indicator phenolphthalein will change color, indicating that all the metal ions have been complexed by the EDTA.
Assuming a standard titration procedure, we can calculate the pba using the following formula:
pba = (Volume of HCl x Molarity of HCl x 50,000) / Volume of EDTA
For example, if we titrate the 50.00 ml 0.1 M EDTA solution with 0.1 M HCl and it takes 25 ml of HCl to reach the endpoint, we can calculate the pba as follows:
pba = (25 ml x 0.1 M x 50,000) / 50.00 ml
pba = 125
Therefore, the pba of the 50.00 ml 0.1 M EDTA solution is 125. This means that the solution has a high alkalinity due to the presence of the EDTA, which has complexed with metal ions to form stable complexes.
To know more about alkalinity visit:
https://brainly.com/question/31556972
#SPJ11
Two cars traveling with the same speed move directly away from one another. One car sounds a horn whose frequency is 205Hz and a person in the other car hears a frequency of 192Hz. What is the speed of the cars?
The speed of the cars is approximately 23.2 m/s.
The speed of the cars can be calculated using the formula for the Doppler effect. By using the given frequencies, we can determine the relative velocity of the cars.
The speed of the cars is approximately 24.2 m/s. To calculate this, we first need to find the difference between the emitted frequency and the observed frequency, which in this case is 13Hz. Then, using the known frequency of the emitted sound and the speed of sound in air (343 m/s), we can calculate the relative velocity of the cars. The formula for this is:
v = (f1 - f2) * λ / f2
where v is the relative velocity, f1 is the emitted frequency, f2 is the observed frequency, and λ is the wavelength of the sound wave.
Plugging in the values, we get:
v = (205Hz - 192Hz) * (343 m/s) / 192Hz
v = 23.2 m/s
To know more about the Doppler effect, click here;
https://brainly.com/question/1330077
#SPJ11
fill in the blank. on mercury and the moon, we notice that larger craters __________ smaller crater
On Mercury and the Moon, we notice that larger craters dwarf smaller craters.
What is the relationship between the size of craters and their impact on Mercury and the Moon?On both Mercury and the Moon, the surfaces are covered with impact craters, which are formed when asteroids or comets collide with these bodies. While craters come in various sizes, we can observe that larger craters tend to dominate and overshadow smaller ones. This indicates that there have been significant impacts throughout the history of Mercury and the Moon, resulting in the formation of these larger craters.
The size difference between larger and smaller craters is particularly evident on Mercury, as it lacks an atmosphere to erode or weather the craters. Therefore, the larger craters on Mercury remain well-preserved and are easily distinguishable. On the Moon, although there is no atmosphere to the same extent as Earth's, some erosion and weathering processes occur due to micrometeorite impacts, the solar wind, and occasional volcanic activity. Nonetheless, the larger craters still retain their dominance over the smaller ones.
Understanding the relationship between the sizes of craters on Mercury and the Moon provides valuable insights into their geological history and the frequency and magnitude of impacts these bodies have experienced over time. The presence of larger craters suggests that more substantial objects have collided with these celestial bodies, potentially causing significant disturbances and shaping their surfaces.
Learn more about craters
brainly.com/question/31838267
#SPJ11