determine the total electric potential energy that can be stored in a 16.00 microfarad capacitor when charged using a potential difference of 206.0 v.

The correct answer is that the two items will either be drawn together or pushed apart, according to the stated statement.

Electricity is created when voltage increases to or subtracted from an object. Since atoms have a negative charge, an object gets an ions when electrons are transferred to it. When an object's electrons are taken away, it develops a positive charge.

All matter has an inherent electric charge, which results from the inclusion of atoms like protons, electrons, and neutrons. The quantity of protons, electrons, and neutrons an atom has affects its charge. Positive or negative charges can exist in an electric field. Protons produce positive charge, while electrons produce negative charge.

To learn more about Electric charge visit:

brainly.com/question/857179

#SPJ1

If something being dropped has a mass of 0.4 kg, and the height from the floor to the top is 15 m then 20J would be the change in PE.

The force acting on the two objects affects the potential energy formula. The formula for gravitational force is P.E. = mgh, where g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface) and h is the height in meters.

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy.

Given :        

Mass of the object  M=0.4 kg

Height up to which it is raised  h=5 m

Potential energy P.E=Mgh

g = 10 m/s^2

P.E= 0.4×10×5=20J

To know more about potential energy visit:

https://brainly.com/question/14427111

#SPJ1

20J would be the change in PE for a drop with a mass of 0.4 kg and a height of 15 m from the ground to the top.

The potential energy formula is impacted by the force operating on the two objects.

P.E. = mgh, where g is the acceleration brought on by gravity, h is the height in metres, is the formula for gravitational force.

Potential energy is a type of stored energy that depends on how various system elements interact with one another. A spring's potential energy rises when it is crushed or stretched. A steel ball has higher potential energy if it is lifted above the ground as opposed to falling to the ground.

Given:

M=0.4 kg, the object's mass

It is raised to a height of h=5 m.

Powerful potential P.E=Mgh

g = 10 m/s^2

P.E= 0.4×10×5=20J.

To know more about potential energy, visit:

https://brainly.com/question/14427111

#SPZ1

Answer:

KE = 30 J

Explanation:

i used a kinetic energy calculater

Answer:

Below

Explanation:

50 * 9.81 = 490.5 N     since there is no acceleration, climber must only overcome the accel of gravity

The refractive index of the unknown substance is 1.23.

Refractive indexes have no dimensions. This value represents how much slower a light wave would go through a substance than it would in a vacuum. When divided by the velocity of light in a medium, the refractive index, denoted by the symbol n, is obtained.

speed of light in vacuum = 3.00 × 10⁸ m/s.

speed of light in the medium = 2.43  × 10⁸ m/s.

Hence,  refractive index of the medium = speed of light in vacuum/ speed of light in the medium

= 3.00 × 10⁸/2.43 × 10⁸

= 1.23

Learn more about refractive index here:

https://brainly.com/question/23750645

#SPJ1

The relationship between current and voltage across a circuit is directly proportional. It is given as per the Ohm's law. Thus, the correct option is D.

Ohm's law states that the current in an electric circuit through a conductor between the two points is directly proportional to the voltage across the two points of the conductor. Introducing the constant of proportionality, the resistance (R), where one arrives at the usual mathematical equation which describes this relationship:

I = V/ R

V = IR

where, I is the electric current flowing through the circuit,

V is the voltage of the electric circuit,

R is the resistance across the electric circuit

More specifically, the Ohm's law states that the R in this relation is a constant, which is independent of the electric current in the circuit.

Therefore, the correct option is D.

Learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ1

Answer:

Bbbbbbbbbbbbbb. bbbbbbbbbbbbbbb

The properties of water that makes it possible for life to continue to exist in lakes covered by a thick layer of ice for many months of the year are:

The correct option is C.

The water in frozen lakes supports life because of the following properties f water;

As soon as the water turns to ice, the ice loses a lot of its water-like density and continues to float on the lake's surface. Water loses density when it grows colder below 4° Celsius, forcing water that is about to freeze to float to the top.

Learn more about water at: https://brainly.com/question/26846829

#SPJ1

Your home's location at x and the store's location at x + 2 km

Solving the displacement problem.

"Displacement" describes a change in an object's location. An arrow pointing from the starting point to the finishing point serves as the object's symbol. For instance, an object's position changes if it shifts from position A to position B. For instance, an object's position changes if it shifts from position A to position B.

Substitution Formula

The final position less the starting position is known as displacement.

To know more about displacement visit:

https://brainly.com/question/30087445

#SPJ1

If you walked one kilometer from your home to the store and then one kilometer back home, you did indeed cover a distance of two kilometers. The distance is calculated by adding the lengths of the two separate paths together, which in this case would be 1 kilometer + 1 kilometer = 2 kilometers.

However, when we talk about displacement, we're referring to the change in position or the shortest straight-line distance between your starting point and your ending point. In this scenario, since you ended up back at your starting point, your displacement is 0 kilometers. This is because the straight-line distance from your home to the store is canceled out by the straight-line distance from the store back to your home.

To better understand this concept, let's consider an example. Imagine you take a trip around a circular track. You start at one point, go all the way around the track, and end up back at the starting point. Even though you covered a certain distance along the track, your displacement is still 0 because you ended up back where you started.

So, in summary, the distance you walked is 2 kilometers, but your displacement is 0 kilometers because you returned to your starting point.

Answer:

The ratio of the mass of planet Zeb to the mass of Earth must be 8.

Explanation:

The gravitational acceleration on the surface of a planet is determined by the mass of the planet and its radius. The equation is g = GM/r^2, where G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.

If we assume that the gravitational acceleration on the surface of both planets is the same, we can set the equation for Earth equal to the equation for planet Zeb and solve for the ratio of the mass of planet Zeb to the mass of Earth.

g(earth) = GM(earth)/r(earth)^2 = GM(zeb)/r(zeb)^2

We know that r(zeb) = 2 * r(earth)

so,

GM(earth)/r(earth)^2 = GM(zeb)/(2*r(earth))^2

GM(zeb)/GM(earth) = (2*r(earth))^2 /r(earth)^2

GM(zeb)/GM(earth) = 4*4

GM(zeb)/GM(earth) = 16

So the ratio of the mass of planet Zeb to the mass of Earth is 16/1 = 8

The force of the car would be = 5000m/s²

Force is defined as the external push or pull that makes an object to move from one position to another.

Mathematically, force is defined as the product of mass and acceleration of a moving object.

That is, F = mass × acceleration

But acceleration= velocity/time

F = mass × velocity/time

mass = 1000kg

velocity = 30 m/s

time = 6 second

Force = 1000× 30/6

= 30000/6

= 5000 m/s²

Learn more about force here:

https://brainly.com/question/25239010

#SPJ1

Important Formulas:
[tex]F=ma[/tex]

force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)

__________________________________________________________

Given:
[tex]F=50N[/tex]

[tex]m=0.5kg[/tex]

[tex]a=?[/tex]

__________________________________________________________

In order to find acceleration, we will need to rearrange the force formula to make acceleration the subject.

[tex]F=ma[/tex]

[tex]\dfrac{F}{m} =\dfrac{ma}{m}[/tex]

[tex]a=\dfrac{F}{m}[/tex]

__________________________________________________________

Finding acceleration:

[tex]a=\dfrac{F}{m}[/tex]

[tex]a=\dfrac{50}{0.5}[/tex]

__________________________________________________________

[tex]\fbox{a = 100 m/s squared}[/tex]

The voltage in the secondary transformer will be 14.26V.

Primarily wound is always on the input side. The side connected to the voltage source is always on this side. Secondary windings are always the output side. Always connected to the load is this side.

Given, Power = 508 W

current in primary coil, i = 17A

number of turns in primary coil, N1 = 88

number of turns in secondary coil, N2 = 42

by using power formula, P = Vi voltage of primary coil can be calculated,

P = V1×i

508 = V1 × 17

V1 = 508/17

V1 = 29.88 V

now voltage of secondary coil, V2 = (N2/N1) × V1

V2 = (42/88)×29.88

V2 = 1254.96/88

V2 = 14.26 V

The voltage in the secondary transformer will be 14.26V.

To know more about Transformer visit

https://brainly.com/question/15200241

#SPJ1

Answer:

-39 mph

Explanation:

65 - 104 = -39 mph    

Answer:

a: True centrifuge works on centripetal force.

b: False separating funnel can't be used to separate blood cells from samples.

e: False separating funnel cannot separate milk and water.

f: Condenser receives high pressure gas from the compressor and convert this gas to a liquid.

After 5 days, the expected frequency of the wrinkly-spreader morphotype in the static (not shaken) microcosm will depend on the initial frequency of the morphotype in the microcosm.

The frequency of a repeated event is its number of instances per unit of time. Another name for it is temporal frequency, emphasizing how it differs from spatial frequency & angular frequency. The period is indeed the reciprocal of a frequency since it is the length of time for one cycle inside a repeating occurrence. For example: if a newborn baby's heart beats at a frequency of 120 times a minute, its period —the time interval between beats— is half a second. Frequency is an important parameter used in science and engineering to specify the rate of oscillatory and vibra tory phenomenon.

To learn more about initial frequency
https://brainly.com/question/28178048
#SPJ4

Translation is one of geometry transformation which is used to move a figure in any direction without rotation.

Transformation means changing a structure to increase, decrease or rearrange its elements. Meanwhile, geometry means a branch of mathematics that explains the nature of lines, angles, planes, and space.

Based on these two definitions, geometric transformations can be concluded as changes in the shape of a line, angle, space, and plane.

In everyday life, this geometric transformation is usually used to create works of art and architectural designs.

Translation or shift is a type of geometric transformation where there is a displacement or shift from a point to a certain direction in a straight line plane. As a result, every plane in the straight line will also be shifted in a certain direction and distance.

Translation basically only changes the position, not the shape and size of the field.

A simple example of translation is an event that occurs on a slide. Where the same person with a field changes positions from the starting point (start of the slide) and the ending point (end of the slide). Another example is a vehicle traveling on a straight road, from this incident it can be seen that the vehicle which is an object does not change size but only changes places.

Learn more about translation at https://brainly.com/question/1192610?.

#SPJ4

A body moves in a perfectly circular path at constant speed. There must be a force pulling toward the center of the circle. According to Newton's first law, there must a force present to keep the object moving in a circle rather than a straight line.

Newton's 1st law is to show the resultant force acting on an object with a composition equal to zero, so that an object that is initially at rest will always remain at rest. While an object initially moves in a straight line, it will forever continue to move in a straight line at a constant speed. So it can be concluded that in Newton's Law 1 the acceleration of an object is directly proportional to the force acting on the object and inversely proportional to the mass or weight of the object itself.

The properties of objects in Newton's 1st law tend to maintain their original state with the same inertia or degree of inertia. That is why Newton's 1st Law is also known as the Law of Inertia. The shape of the moment of inertia in Newton's 1st Law occurs in various forms, for example linear moments of inertia, mass moments of inertia, and polar or polar moments of inertia.

The magnitude of the stresses also differ according to the material used, such as bending stress and torsional stress, so the calculation can be based on the moment of inertia

Learn more about Newton first law at https://brainly.com/question/29775827.

#SPJ4

The change that will would have resulted in a greater time for a projectile of mass m fired with an initial horizontal velocity vx from a height h above the ground is increase the height traveled by the projectile to 2h (option D)

The projectile's flight time is determined using the formulas below;

h = v₀t + ½ gt²

Where:

h = height (m)

v₀ = the starting velocity (m/s)

t = time (s)

g = the acceleration due to gravity (9.8m/s²)

v₀ (initial vertical velocity of the projectile) = 0

Hence,

2h = gt²

t = [tex]\sqrt{\frac{2h}{g} }[/tex]

The projectile's mass has no impact on how long it takes to travel if friction caused by air resistance is disregarded.

In the vertical direction, the initial horizontal velocity is not taken into account.

Therefore, increasing the projectile's height to 2h is the only method to lengthen its flight time.

The question is incomplete, it should be:

A projectile with mass m is fired with initial horizontal velocity vx from height h above level ground. Which change would have resulted in a greater time of flight for the projectile? [Neglect friction.]

A. decreasing the mass to m/2

B. decreasing the height to h/2

C. increasing the initial horizontal velocity to 2vx

D. increasing the height to 2h

Learn more about projectile motion here: https://brainly.com/question/29385625

#SPJ4

After the collision, the two-cart system's total momentum was 0.22 kg m/s in magnitude. The correct answer is A.

To find the magnitude of the total momentum of the two-cart system after the collision, we can use the principle of conservation of momentum. This principle says that the total momentum of a closed system, like the two carts in this case, stays the same unless an outside force changes it.

First, calculate the initial momentum of the first cart:

Then, calculate the initial momentum of the second cart:

After that, we need to calculate the total initial momentum:

Use the principle of conservation of momentum to calculate the final momentum:

So the magnitude of the total momentum of the two-cart system after the collision is 0.22 kg m/s.

This question isn't complete. Here's how it should be written and how answer choices should be given: 

A 0.500-kilogram cart traveling to the right on a horizontal, frictionless surface at 2.20 meters per second collides head on with a 0.800-kilogram cart moving to the left at 1.10 meters per second. What is the magnitude of the total momentum of the two-cart system after the collision?

The correct answer is A.

Learn more about magnitude of the total momentum here: brainly.com/question/11756811

#SPJ4

The kinetic energy of an object is half of the product of mass and square of velocity. Then, for a person with a kinetic energy of 1800 J and velocity of 12 m/s is 25 kg.

Kinetic energy of an object is generated by virtue of its motion. It is related to the mass and velocity by the expression as follows:

Ke = 1/2 m v².

Thus, as the mass or velocity increases, kinetic energy increases.

Given velocity of the person = 12 m/s

kinetic energy = 1800 J

1/2 m v² = 1800 J

The mass of the person can be then calculated as follows:

m = 2 Ke/v²

m = 1800 J × 2 / (12 m/s)²

m = 25 Kg.

Therefore, the mass of the person is 25 Kg.

Find more on kinetic energy;

https://brainly.com/question/26472013

#SPJ1

Answer:

250 Newtons

Explanation:

To find the net force acting on the car, we can use the equation:

F = ma

Where F is the net force, m is the mass of the car and a is the acceleration.

We know that the mass of the car is 100 kg and the acceleration is (10m/s - 5m/s) / 2 seconds = 2.5 m/s²

So, the net force acting on the car is:

F = (100 kg) x (2.5 m/s²) = 250 N

Therefore, the net force acting on the car is 250 N

When going up a hill, the type of energy which a bicycle has is potential energy.

A potential energy is a stored energy which depends upon the relative position of various parts of a system. When it is compressed or stretched, a spring has more potential energy. Any object which is lifted from its resting position has stored energy because it has a potential to do work when released.

When going up a hill, a bicycle has potential energy. As we climb to get up the hill, we gain potential energy.

Potential energy is the stored energy in any object by virtue of its position or arrangement of parts. However, it is not affected by the environment outside of the object, such as air or height. On the other side, kinetic energy is the energy of an object's particles in motion.

Learn more about potential energy at: https://brainly.com/question/24284560

#SPJ4

Determine how much it would cost to heat a home's water for an hour every day for 60 days using a 2kW immersed rod at a rate of Rs. 1.50 per unit.

Why do you use the word "immersion"?

The act of totally coating something with a substance by dipping it into is called immersion. It could be literal—like diving headfirst into water—or metaphorical—like entirely giving yourself over to a task.

Why do we use immersion?

Answer and justification The resolution of a microscope is improved with immersion oil. It lessens the loss in light brought on by the specimen's refraction (light bending). When light passes through a different material, like a piece of glass

To know more about immersion visit:

https://brainly.com/question/29188764

#SPJ1

The phrase describes an activation of complex is (a) It is the potential energy required for a reaction to occur.

Activated complex is a process when reactant is interacted each other to form the product. Activated complex produce the highest energy in the chemical reaction because of its unstable atom activity and molecule reaction. To activated the activated complex, we need to a kinetic energy that is higher or equal to potential energy required for a reaction to occur. In short, activated complex is a process to change potential energy into kinetic energy in the reaction to create a product.

Learn more about activated complex here

https://brainly.com/question/1670458

#SPJ4

The given statement “A mechanical wave transmits energy through a vacuum” is false, because mechanical waves cannot move through areas of space where there are no particles because their energy transmission depends on particle contact.

Waves that are classified as mechanical waves require the presence of a medium in order for their energy to be transmitted from one place to another. This makes mechanical waves incapable of transmitting their energy through a vacuum. There are three distinct categories of mechanical waves: transverse waves, longitudinal waves, and surface waves. Mechanical waves have many interesting characteristics, but one of the most noteworthy is their measurement, which is given by displacement divided by wavelength.

To learn more about mechanical waves, click here:

https://brainly.com/question/24459019

#SPJ4

Yes it is important that the temperature of the surface important to apply a clear coat for G60 Galvanized tubing.

The end of a steel sheet (either hot- or cold-rolled) is sheared and welded to the preceding coil to form one continuous coil.A high-performance tension leveler is used to straighten the strip, resulting in excellent flatness.

The strip is dipped in an alkali bath and brushed for preliminary degreasing, and then undergoes alkaline electrolytic degreasing. This removes impurities on the material surface that could harm the zinc coating. The strip is then dipped in a acidic bath to activate the surface.

The zinc-coated strip is given various chemical treatments according to intended use, including phosphate treatment for excellent paintability, and chromate free special treatment for good corrosion resistance.

To know more about galvanisation here

https://brainly.com/question/16029866

#SPJ4

Endothermic chemical reactions occur when the reactants take in heat energy from their environment to create products. A cooling effect is produced by these reactions because they cause their surroundings to become cooler.

The term "endothermic" refers to chemical reactions that either completely absorb or use energy. When bonds inside the reactants are broken, more energy is taken in than is released when fresh bonds form in the product lines. This is known as an endothermic reaction.

                                                                                                                                                                                                                                                                                                                              Examples of endothermic processes include photosynthesis, the evaporation of liquids, the melting of ice and dry ice, the cracking of alkanes, thermal decomposition, the oxidation of ammonium chloride in water, and many others.

To know more about endothermic reactions visit:

https://brainly.com/question/9799465

#SPJ1

The force of gravity between the two objects is 1.33 x 10⁻¹⁰ N.

The force of gravity between the two objects is calculated by applying Newton's law of universal gravitation.

Fg = Gm₁m₂ / r²

where;

Fg = ( 6.67 x 10⁻¹¹ x 1 kg x 2 kg ) / ( 1 m )²

Fg = 1.33 x 10⁻¹⁰ N

Thus, the force of gravity is proportional to the product of the masses and inversely proportional to the square of the distance between them.

Learn  more about force of gravity here: https://brainly.com/question/2537310

#SPJ1