For ionic compounds, assume complete dissociation into cations and anions. CsCI,C10Hg,Na3PO4, are mentioned below.
What is compounds ?
A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single. Different types of compounds are present.
What is ionic compound ?
An ion with a positive charge is a cation, whereas one with a negative charge is an anion.
It is equal to the numbers of ions that form when an ionic compound dissolves.
if i>1, the molecules are said to be dissociated.
if i=1, the molecules have neither associated nor dissociated.
if i<1, the molecules have associated.
CsCl
vant hoff factor i= 2
C₁₀H₈
vant hoff factor i= 1
Na₃Po₄
vant hoff factor i= 3+1= 4.
Therefore, For ionic compounds, assume complete dissociation into cations and anions. CsCI,C10Hg,Na3PO4, are mentioned above.
Learn more about compounds from the given link.
https://brainly.com/question/14782984
#SPJ1
For NH4NO3(s) write a balanced equation. Add type of reaction and oxidation charges for each element if applicable.
In a redox reaction, there is a transfer of electrons
What is a balanced redox reaction?The question is incomplete but it seems to have something to do with redox reactions.
A balanced redox reaction is a chemical equation that represents a redox (reduction-oxidation) reaction with the same number of atoms of each element on both the reactant and product sides and the same total charge on both sides. In a redox reaction, there is a transfer of electrons from one substance (the reducing agent) to another substance (the oxidizing agent).
In order to balance a redox reaction, you need to balance the number of atoms of each element in the reaction, and also balance the charges.
Learn more about redox reactions:https://brainly.com/question/13293425
#SPJ1
using a reference table, determine the hrxn for each of the three reactions you performed from the heats of formation of each of the species in the reaction.
The enthalpy change of a reaction (ΔHrxn) can be calculated using the heats of formation of each of the reactants and products.
The heat of formation (ΔHf) is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states under standard conditions. The standard state is the most stable form of the element at a given temperature and pressure.
The equation for calculating the enthalpy change of a reaction using heats of formation is:
ΔHrxn = Σ(nΔHf(products)) - Σ(nΔHf(reactants))
Where ΔHf is the heat of formation, n is the stoichiometric coefficient, and Σ is the sum of the heats of formation for all species in the reaction.
By using a reference table of heats of formation, we can calculate the enthalpy change for a given reaction and determine if it is exothermic (ΔHrxn < 0) or endothermic (ΔHrxn > 0).
Learn more about enthalpy :
https://brainly.com/question/3393755
#SPJ4
draw and name the product for the reaction between an alkyne and one equivalent of hcl . 3 methyl 1 butyne or 3 methyl but 1 yne is a 4 carbon chain with a triple bond between carbons 1 and 2 and a methyl substituent on carbon 3. this reacts with h c l to give the product.
the outcome of combining an alkyne with one equivalent of hcl is st -CEC-H + 1H-CI. 3-methyl-1-butyne 2-chloro-3-methyl-1-butene.
An alkyne is a type of hydrocarbon with a triple bond between two carbon atoms, which makes it unsaturated and more reactive than its corresponding alkane or alkene. Alkynes have the general formula CnH2n-2 and can have multiple triple bonds, giving rise to a range of isomers with different properties. Alkynes are used in many industrial processes, such as in the production of polymers, solvents, and pharmaceuticals, and are also important intermediates in organic synthesis. Alkynes can undergo various types of reactions, such as addition, substitution, and polymerization, and their reactivity can be modulated by the choice of substituents, reaction conditions, and catalysts. Alkynes are also of interest in the field of materials science, as they can form strong covalent bonds with metals and semiconductors, and can be used as building blocks for molecular electronics and nanotechnology.
Learn more about alkyne here:
https://brainly.com/question/23508203
#SPJ4
10. Changing the volume of the system alters the equilibrium position of this equilibrium:
2( ) 2( ) 3( ) 3 2 N H NH gg g
+
But a similar change has no effect on this equilibrium:
2( ) 2( ) ( ) 2 H Cl HCl gg g
+
Explain.
The process of separating Na+ and Cl- against coulomb attractive force is ___________.
A. exothermic
B. Not enough information
C. endothermic
An ionic compound comprised of Na+ and Cl is sodium chloride. An anion is a negative charges chlorine ion (Cl) and a cation is a positive sodium ion (Na+).
What interactions between Cl and Na ions are there?The sodium and chlorine ions exert an electric pull on one another when one sodium electron is transferred to a chlorine ion, binding the sodium and chlorine molecules together.
What kind of force is attractive?Because it attracts objects to itself from any distance, gravitational force is a very well-known example of attraction. More details regarding how this force operates are provided by Newton's global law of gravity.
To know more about chlorine visit:
https://brainly.com/question/14962130
#SPJ1
In a calorimeter, the temperature of 100 g of water decreased by 20°C when 10 g of ice melted. How much heat was absorbed by the ice?
A 8.36 j
b 8.36 kj
c 20 kj
d 836 kj
The heat that is absorbed is 8.36 kj.
What is the heat that is absorbed?Heat absorbed by ice is the amount of thermal energy that is transferred from its surroundings to the ice, causing the temperature of the ice to increase. This process occurs until the ice reaches its melting point, at which point it begins to convert from a solid state to a liquid state.
We have that;
Q = mcdT
Q = Heat absorbed
m = mass of the substance
c = Heat capacity
dT = temperature change
Thus
Q = 100 * 4.18 * (20)
Q = 8.36 kj
Learn more about heat:https://brainly.com/question/1429452
#SPJ1
. Why do you need to fill the bomb with pure oxygen? What would happen if you skipped that step and just allowed the bomb to fill with air?
To calculate the heating value of both solid and liquid fuels, one uses a bomb calorimeter. It is made up of a powerful steel shell called a bomb. It is composed of a base that holds the platinum cross.
What exactly is a solid defined as?
It seems evident what a solid is; a solid is typically thought of as hard and firm. However, closer examination makes the term less clear. For instance, a butter cube is unmistakably a solid since it becomes hard after being kept in a refrigerator. Having stayed on the
A crystalline solid is what?
A solid that has its component atoms and molecules (or occasionally ions) arranged in a crystalline structure microscopic structure is referred to as a crystal lattice (also referred as a crystal). A homogeneous microscopic structure known as a crystal lattice extends across every point of the crystalline solid.
To know more about solid visit:
https://brainly.com/question/17061172
#SPJ1
How many oxygen formula units are in 85 grams are in (insert pic formula)? MM=601.93
50 POINTS!!!!!!!!
There are 6.7 * 10^23 oxygen atoms
What is the mole?The mole is a unit of measurement in chemistry used to express amounts of a chemical substance. One mole is defined as the amount of a substance that contains Avogadro's number of entities, which is approximately 6.022 x 10^23 entities
The first step is to get the number of moles of the compound.
Number of moles =85 grams/602 g/mol
= 0.14 moles
Then we have the number of oxygen atoms as;
0.14 moles * 8 * 6.02 * 10^23
= 6.7 * 10^23 oxygen atoms
Learn more about moles:https://brainly.com/question/26416088?
#SPJ1
a 2.0 l sample of butane at 25 c and 1.3 atm is combusted with excess o2. using the bond enthalpies given above, estimate the change in energy by this sample of butane (c4h10). chemical structure of butane:
The chemical equation for the combustion of butane (C4H10) with excess oxygen (O2) is:
C4H10 + 13/2 O2 → 4 CO2 + 5 H2O
The balanced equation shows that 1 mole of butane reacts with 13/2 moles of O2 to produce 4 moles of CO2 and 5 moles of H2O. The change in energy for the combustion of butane can be calculated using bond enthalpies, which are given in units of kJ/mol of bonds broken or formed.
The bond enthalpies needed for this calculation are:
C-H = 413 kJ/mol
C-C = 348 kJ/mol
C=O = 799 kJ/mol
O=O = 498 kJ/mol
O-H = 463 kJ/mol
First, we need to calculate the total energy required to break the bonds in butane:
4 C-H bonds × 413 kJ/mol/bond = 1652 kJ/mol
8 C-C bonds × 348 kJ/mol/bond = 2784 kJ/mol
The total energy required to break the bonds in butane is:
1652 kJ/mol + 2784 kJ/mol = 4436 kJ/mol
Next, we need to calculate the total energy released by forming new bonds in the products:
8 C=O bonds × 799 kJ/mol/bond = 6392 kJ/mol
10 O-H bonds × 463 kJ/mol/bond = 4630 kJ/mol
The total energy released by forming new bonds in the products is:
6392 kJ/mol + 4630 kJ/mol = 11022 kJ/mol
The net change in energy for the combustion of butane is:
11022 kJ/mol - 4436 kJ/mol = 6586 kJ/mol
Finally, we need to calculate the energy change for the given sample of butane (C4H10) by using the Ideal Gas Law:
PV = nRT
where P = 1.3 atm, V = 2.0 L, n is the number of moles of butane, R is the gas constant (0.0821 L·atm/mol·K), and T = 25°C = 298 K.
Solving for n, we get:
n = PV/RT = (1.3 atm)(2.0 L)/(0.0821 L·atm/mol·K)(298 K) = 0.108 mol
Therefore, the change in energy for the given sample of butane (C4H10) is:
6586 kJ/mol × 0.108 mol = 711 kJ
Therefore, the change in energy for the given sample of butane (C4H10) is approximately 711 kJ.
To know more about combustion click here:
brainly.com/question/15117038
#SPJ4
In this experiment, we will need to ensure the sample and burette are ready for titration. Select ALL the statements that are TRUE. Note: Partial credit will not be given to partial answers. You must select ALL the true statements. Right before titration, add 5-8 drops of the indicator, Calmagite. Measure the pH of the water solution and adjust it to pH 7 with HCI. Measure the pH of the water solution and adjust it to pH 10 or above with a buffer. Rinse and coat with DI water, then with EDTA solution before filling it up with EDTA. Right before titration, add 5-8 drops of the indicator, phenolphthalein.
Prior to titration, the buret must be cleaned with lab water and the titration solution. With little volumes of lab water, rinse the buret three times.
What is meant by Calmagite?A complex metric indicator called calmagite is used in analytical chemistry to detect the presence of metal ions in solution. The color of calmagite changes when it is attached to an ion, just like with other metal ion indicators. The titration of calcium or magnesium with ethylenediaminetetraacetic acid frequently uses the indicator calmagite in analytical chemistry (EDTA). The amount of magnesium in biological materials can be determined using it as well. water soluble.In the presence of calcium (Ca 2+) and magnesium (Mg 2+) ions at pH 10, the metal ion indicator calmagite causes a solution to turn wine red. When EDTA is added to a solution, the indicator is removed from the metal-indicator complex and the solution turns blue.To learn more about Calmagite, refer to:
https://brainly.com/question/30559544
#SPJ4
Use the relative electronegativity values of the elements in formaldehyde to explain why the distribution of electron density appears as it does.
Formaldehyde is a molecule with the chemical formula CH2O. It consists of a central carbon atom bonded to two hydrogen atoms and an oxygen atom, with a double bond between the carbon and oxygen atoms. The relative electronegativity values of the elements involved in formaldehyde are as follows:
• Carbon: 2.55
• Hydrogen: 2.20
• Oxygen: 3.44
What is the role of electronegativity?Electronegativity is a measure of an atom's ability to attract the electrons towards itself in a covalent bond. In a covalent bond between two different atoms, the electrons are shared between them, but they may not be shared equally. In formaldehyde, the oxygen atom is more electronegative than the carbon atom. Therefore, the oxygen atom attracts the shared electrons in the double bond more strongly towards itself, resulting in a greater electron density around the oxygen atom. This creates a partial negative charge on the oxygen atom and a partial positive charge on the carbon atom. Similarly, the hydrogen atoms in formaldehyde have a lower electronegativity than the carbon atom. Therefore, the electrons in the C-H bonds are shared unequally, with a partial negative charge on the hydrogen atoms and a partial positive charge on the carbon atom.
To know more about covalent bond, visit:
https://brainly.com/question/10777799
#SPJ1
What is the mass in grams of 7.55x10^23 atoms of nitrogen?
N(14.01). Round off answer (at end of calculation) to 3 significant figures or it will be counted wrong.
Do not include unit, g.
Based on the mass of 1 mole of nitrogen atoms, 7.55 x 10²³ atoms of nitrogen have a mass of 17.56 grams.
What is the number of atoms in 1 mole of nitrogen?The number of atoms in 1 mole of nitrogen = 6.02 * 10²³ atoms
The mass of 1 mole of atoms of nitrogen = 14 g
Hence, 6.02 * 10²³ atoms has a mass of 14.01 g
Mass of 7.55 x 10²³ atoms = 14.01 g/mol * 7.55 x 10²³ / 6.02 * 10²³
The mass of 7.55 x 10²³ = 17.56 g
So,7.55 x 10²³ atoms of nitrogen have a mass of 17.56 grams.
Learn more about mass and number of atoms at: https://brainly.com/question/30337801
#SPJ1
cjhegg q12: which region of earth generally has the highest concentration of water vapor and which region generally has the lowest concentration? q13: why would the distribution of water vapor change across the globe in the way that you identified in q13? (i.e., why would the region that had the highest concentration be expected to have the highest concentration and why would the region that had the lowest concentration be expected to have lowest concentration?) q14: how would you describe the movement of the area with the most water vapor over the course of a year? q15: how does the movement you just described relate to what you learned in the solar radiation
The tropical regions of earth contains the highest concentration of water vapor and higher altitudes and poles have the lower water vapor concentration.
What is differential distribution of water vapor ?Lower atmospheric water vapor molecules absorb heat generated from the Earth's surface. In turn, the water vapor molecules emit heat in all directions. The Earth's surface receives some of the heat back.
In the tropics, as the seasons change, a band of extremely humid air sways both north and south of the equator. The Intertropical Convergence Zone, where the easterly trade winds from either hemisphere meet and create almost daily thunderstorms and clouds, includes this ring of dampness.
Water vapor concentrations are higher farther from the equator in the summer-experienced hemisphere and lower in the winter-experienced one.
Find more on water vapor distribution:
https://brainly.com/question/17969735
#SPJ1
TASK 2 - Pass 2B.P4 Identify an alkene and carboxylic acid using primary observations. To achieve 2B.P4, learners should follow guidance to identify an alkene and a carboxylic acid (for example, ethanoic acid) from primary observations. Learners will be expected to identify an alkene in the way described in 1B.4. For ethanoic acid this is by its pH and its reaction with sodium carbonate. The guidance given to the learners could be in the form of a flowchart.
Carboxylic acids are acidic due to the presence of the carboxyl group. They can react with bases to form salts and water. Alkenes, on the other hand, are not acidic.
How can you distinguish the alkene from the carboxylic acid?Alkenes have a carbon-carbon double bond (-C=C-), while carboxylic acids have a carboxyl group (-COOH). You can identify the functional group by looking at the molecular formula or by using spectroscopic techniques like infrared (IR) spectroscopy.
Carboxylic acids have higher boiling points than alkenes due to the presence of hydrogen bonding between carboxylic acid molecules.
Learn more about alkenes:https://brainly.com/question/13910028
#SPJ1
use the ph scale below to determine the ph value of the water in this test. record the value. also, determine whether the ph stayed the same, became more acidic, or became more alkaline compared to the first test.
The pH value of the water decreased: indicating that it became more acidic compared to the first test.
During the experiment, the student blew bubbles into the water, which introduced carbon dioxide. Carbon dioxide reacts with water to form carbonic acid, a weak acid that can lower the pH of the water. As a result: the pH value of the water decreased, indicating that it became more acidic.
This is because the concentration of hydrogen ions, which determine acidity, increased in the water. The change in pH value may have implications for the organisms living in the water, as different pH levels can affect their survival and growth. Therefore understanding the effects of human activities, such as blowing bubbles into water, on pH levels is important for maintaining the health of aquatic ecosystems.
This question should be given as:
A student placed a straw into the water and blew bubbles (carbon dioxide) into the water for 30 seconds. The pH of the glass of tested again. Use the pH scale below to determine the pH value of the water in this test. Record the value. Also, determine whether the pH stayed the same, became more acidic, or became more alkaline compared to the first test.Learn more about alkaline brainly.com/question/27006881
#SPJ4
If 38g of water are produced in the reaction, how many moles of COz were produced.
If 38g of water are produced in the reaction, 19 moles of CO₂ were produced.
What is mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
CO₂ + 4H₂ → CH₄ + 2H₂O
In the above reaction we see that,
2 mole of H₂O produce 1 mol of CO₂
Therefore,
38 gram of H₂O produce 19gram of CO₂
Thus, If 38g of water are produced in the reaction, 19 moles of CO₂ were produced.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ9
The modern penny has a mass of 2.500 g when it is manufactured, but it is mostly zinc metal. Only the outside of the penny is coated in copper. Each modern penny is coated in 0.0625 g of copper. how many atoms of copper (Cu) are in a modern penny?
If the modern penny has a mass of 2.500 g when it is manufactured, but it is mostly zinc metal. The number of atoms of copper (Cu) that are in a modern penny is: 5.91 x 10^18 atoms of copper (Cu).
How to find the number of atoms of copper?To calculate the number of atoms of copper (Cu) in a modern penny, we need to know the atomic mass of copper, which is 63.55 g/mol, and the Avogadro's number, which is 6.022 x 10^23 atoms/mol.
First, we'll calculate the number of moles of copper in the penny by dividing its mass by the atomic mass of copper:
0.0625 g / 63.55 g/mol = 9.84 x 10^-5 mol
Next, we'll multiply the number of moles by Avogadro's number to get the number of atoms:
9.84 x 10^-5 mol * 6.022 x 10^23 atoms/mol = 5.91 x 10^18 atoms
Therefore, there are approximately 5.91 x 10^18 atoms of copper (Cu) in a modern penny.
Learn more about atoms of copper here:https://brainly.com/question/4086483
#SPJ1
chem lab explain the resulting shift in equilibrium and any reaction that occurs to explain the change in color observed.
A chemical system is defined as a system at which equilibrium can be temporarily shifted out of equilibrium by adding or removing one or more of the reactants or products.
Le Chatelier`s Principle states that, "when a system at equilibrium is subjected to a change in temperatures, pressure, or concentration of a reactant or product, the system will, if possible shift its equilibrium position so as to partially counteract the effect of the change".
In equilibrium shifting, if the system gets darker red in color, then the equilibrium must be shifting to the right (i.e., towards producing more of the colored product). If the color of the system gets fainter (i.e., or disappears altogether), then the equilibrium must be shifting towards the left (toward the colorless components).
Learn more about equilibrium shifting from the link given below.
https://brainly.com/question/29462366
#SPJ4
What is cellular respiration?
Help pls !!!
Explain how the mass of carbon is conserved during cellular respiration.
Which of the following was Robert A. Millikan able to determine, either from his own work, or by building on the work of J.J. Thomson? Select all that apply. Select all that apply: 0 The existence of an electron The charge of an electron The mass of an electron The model of an atom with a small, positively charged nucleus.
Robert A. Millikan able to determine, either from his own work, The mass of an electron. Hence, the correct option is (c).
Robert A. Millikan was able to determine the charge of an electron, but the discovery of the electron itself was made by J.J. Thomson. Millikan's work built on Thomson's discovery and helped to refine our understanding of the properties of electrons. By conducting the oil drop experiment, Millikan was able to measure the charge of an electron with great precision. He observed the motion of tiny oil droplets that were suspended in an electric field, and by measuring the strength of the electric field and the speed of the droplets, he was able to calculate the charge of each droplet. By adjusting the strength of the electric field, he was able to find the smallest possible charge that a droplet could have, which corresponded to the charge of a single electron. However, Millikan did not determine the mass of an electron, as this was already known from Thomson's work on the charge-to-mass ratio of electrons. Additionally, Millikan did not propose a model of an atom with a small, positively charged nucleus, as this idea was developed later by Ernest Rutherford.
To know more about electron please refer: https://brainly.com/question/15054861
#SPJ4
The electron is moving from
energy level 2 to energy
level 1 (the ground state).
What happens during this
transition?
A. The electron falls into the nucleus.
B. The electron creates an absorption line (black line) on
a spectrum.
C. The electron emits a photon of EMR.
D. The electron absorbs a photon of electromagnetic
radiation (EMR).
The electron is moving from energy level 2 to energy level 1 the ground state then the electron emits a photon of EMR. Therefore, option C is correct.
What is energy level ?The set distances from an atom's nucleus where electrons may be found are referred to as energy levels. In an atom, the small, negatively charged electrons orbit the central, positively charged nucleus.
The energy of the electron drops when it changes levels, and the atom releases photons. The emission of the photon occurs as the electron transitions from a higher to a lower energy state.
Thus, option C is correct.
To learn more about the energy level, follow the link;
https://brainly.com/question/29736874
#SPJ9
which of these variables are not state functions? which of these variables are not state functions? m (mass) u (internal energy) q (heat) t (temperature) w (work) v (volume)
The variables that are not state functions are m (mass), q (heat), and w (work).
What is work?Work is an activity that requires physical or mental effort and is done in exchange for money or other rewards. It can also be seen as an exchange of energy, where an individual puts in effort in order to achieve a desired outcome. Work can be done in a variety of fields and can range from manual labor to professional jobs. It is an important part of many people's lives and can be a source of fulfillment and satisfaction, as well as providing a means of economic security. Work can also be a source of stress, but when done properly can be a great way to make a living, develop skills, and better oneself.
Therefore, The variables that are not state functions are m (mass), q (heat), and w (work).
To learn more about work, click the link below:
https://brainly.com/question/18094932
#SPJ4
if q > keq, what does that say about the relationship of the system to equilibrium? group of answer choices A. the system is not at equilibrium and will produce more reactants to reach equilibrium (shift to the left). B. the system is at equilibrium. C. the system is not at equilibrium and will produce more products to reach equilibrium (shift to the right). D. there is no relationship between q and keq.
If q > Keq, it means that the reaction quotient, q, has a higher numerical value than the equilibrium constant, Keq and the system is not at equilibrium and will produce more reactants to reach equilibrium (shift to the left).
Therefore, the system is not at equilibrium and will shift in the direction that reduces the value of q and increases the value of Keq, which is toward the side of the reaction with fewer products and more reactants.
In this case, the system will shift to the left (produce more reactants) to reach equilibrium. This suggests that there is an excess of products or a deficiency of reactants in the system compared to what would be present at equilibrium.
Hence the correct option is A.
To know more about equilibrium here
https://brainly.com/question/11336012
#SPJ4
carbohydrates serve as a vital source of chemical energy to the human body. carbohydrates are broken down into smaller units of glucose, among other sugars, providing energy to various muscles and orgnas, including the brain. on average, for every 15.0g of carbohydrates consumed, the body will store 250kj of energy.convert this energy value to kilocalories (kcal).
The energy value to kilocalories (kcal) would be 32.5 kcal.
What is the difference between energy value and kilocalories?One kilogram of water requires one kilocalorie (1 kcal, or 1000 calories) of heat energy to raise its temperature by one degree Celsius (°C). Joule is the SI-standard unit for energy (J). About 4.18 calories make up one kcal.
The phrase used to describe how much energy is needed to raise a liter of water's temperature by one degree Celsius at sea level. The term "calorie" is frequently used in nutrition terminology to describe a unit of dietary energy.
Let the equation be
1 kJ = 1,000 J
1 cal = 4.184 J
1 kcal = 1,000 cal
136 kj x 1000j/1kj = 1.36 x [tex]$$10^5[/tex] J
simplifying the equation, we get
1.36 x [tex]$$10^5[/tex] J x 1 cal/4.184J = 32, 500
32500 cal x 1 kcal/1,000 cal = 32.5 kcal.
Therefore, the energy value to kilocalories (kcal) would be 32.5 kcal.
To learn more about energy value and kilocalories refer to:
https://brainly.com/question/28445950
#SPJ4
calculate the number of moles in 2.3gram of sodium (Na=23).
The number of moles in 2.3 grams of sodium atom is 0.1 moles and is calculated by formula, mass/molar mass.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.It is given as,mass/molar mass= 2.3/23=0.1 moles
Thus, there are 0.1 moles in 2.3 grams of sodium.
Learn more about mole,here:
https://brainly.com/question/26416088
#SPJ9
a. Using proper arrow formalism, write down a mechanism for the formation of the acylium ion from the reaction between acetyl chloride and aluminium chloride. b. As a model system and using proper arrow formalism, write a mechanism for the Friedel-Crafts acylation of bromobenzene using the acylium ion formed in (a). To simplify your work, write a mechanism in which carbon-2 of bromobenzene (ortho- position) is the nucleophilic atom.
The mechanism of the reactions of both the subparts of the questions is below:
A)The formation of the acylium ion from the reaction between acetyl chloride and aluminium chloride can be described by the following mechanism:
Step 1: Formation of the complex
AcCl + AlCl3 → [AcCl-AlCl3]
Step 2: Deprotonation to form the acylium ion
[AcCl-AlCl3] → Ac+ + AlCl4-
In step 1, the acetyl chloride molecule reacts with aluminium chloride to form a complex. In step 2, the complex undergoes deprotonation to form the acylium ion, which is stabilized by the aluminium chloride.
(b) The mechanism for the Friedel-Crafts acylation of bromobenzene using the acylium ion formed in (a) can be described by the following steps:
Step 1: Formation of the complex
Ac+ + AlCl4- → [Ac-AlCl4]
Step 2: Attack of the ortho-carbon of bromobenzene
C6H5Br + [Ac-AlCl4] → C6H4Br-2-COCH3 + AlCl3
Step 3: Regeneration of the catalyst
AlCl3 + [Ac-AlCl4] → AcCl + AlCl4-
In step 1, the acylium ion formed in (a) reacts with aluminium chloride to form a complex. In step 2, the complex reacts with bromobenzene, and the ortho-carbon attacks the carbonyl carbon of the acylium ion to form a new carbon-carbon bond. In step 3, the catalyst is regenerated, and acetyl chloride is produced as a byproduct.
The arrow formalism for the three steps can be written as follows:
Step 1:
Ac+ AlCl4- [Ac-AlCl4]
↑ ↓ ↑
Step 2:
C6H5Br [Ac-AlCl4] C6H4Br-2-COCH3 AlCl3
↑ ↓ ↑ ↑
Nucleophile Electrophile Product Catalyst
Step 3:
AlCl3 [Ac-AlCl4] AcCl AlCl4-
↑ ↓ ↑ ↓
Catalyst Complex Byproduct Catalyst
To know more about mechanism of the reactions here
https://brainly.com/question/26690612
#SPJ4
A saturated aqueous solution of CdF2 is prepared. The equilibrium in the solution is represented above. In the solution, [Cd2+]eq=0.0585M and [F−]eq=0.117M. Some 0.90MNaF is added to the saturated solution. Which of the following identifies the molar solubility of CdF2 in pure water and explains the effect that the addition of NaF has on this solubility?
CdF2(s)⇄Cd2+(aq)+2F−(aq)
The molar solubility of CdF₂ in pure water is 0.0585M, and adding NaF decreases this solubility because the equilibrium shifts to favor the precipitation of some CdF₂. The correct option is A.
According to the statement, the option that identifies the molar solubility of CdF₂ in pure water and explains the effect that the addition of NaF has on this solubility is [CdF₂]eq = [Cd₂+]eq = 0.0585 M (since the solubility product expression for CdF₂ gives Ksp = [Cd₂+][F-]², and F- is in excess).
The molar solubility of CdF₂ in pure water can be determined by calculating the concentration of Cd₂+ and F− ions in the saturated solution, and then using the stoichiometry of the equilibrium reaction to determine the concentration of CdF₂ that would dissolve in pure water.
From the equilibrium equation: CdF₂(s) ⇄ Cd₂+(aq) + 2F−(aq), we know that for every mole of CdF₂ that dissolves, 1 mole of Cd₂+ and 2 moles of F− ions are produced.
The effect of adding NaF to the saturated solution can be explained by the common ion effect. When NaF is added, it provides additional F− ions, which are already present in the saturated solution, and thus increases the concentration of the common ion.
This leads to a shift in the equilibrium to the left, causing more CdF₂ to precipitate out of solution until a new equilibrium is established. As a result, the molar solubility of CdF₂ in the solution decreases.
Learn more about The molar solubility of CdF₂:
https://brainly.com/question/15594588
#SPJ4
Complete question:
CdF₂(s)⇄Cd₂+(aq)+2F−(aq) A saturated aqueous solution of CdF₂ is prepared. The equilibrium in the solution is represented above. In the solution, [Cd₂+]eq=0.0585M and [F−]eq=0.117M. Some 0.90MNaF is added to the saturated solution. Which of the following identifies the molar solubility of CdF₂ in pure water and explains the effect that the addition of NaF has on this solubility?
a. The molar solubility of CdF₂ in pure water is 0.0585M, and adding NaF decreases this solubility because the equilibrium shifts to favor the precipitation of some CdF₂.
b. The molar solubility of CdF₂ in pure water is 0.0585M, and adding NaF has no effect on the solubility because only changes in temperature can increase or decrease the molar solubility of an ionic solid.
c.The molar solubility of CdF₂ in pure water is 0.117M, and adding NaF decreases this solubility because the equilibrium shifts to favor the precipitation of some CdF₂.
d. The molar solubility of CdF₂ in pure water is 0.176M, and adding NaF increases this solubility because the Na+ ions displace the Cd₂+ ions, causing the equilibrium to shift to favor the products.
he two reactions above, show routes for conversion of an alkene into an oxirane. if the starting alkene is cis-2-butene the configurations of the oxirane products, a and b are product a: cis product b: trans will either of these two oxirane products rotate the plane of polarization of plane polarized light? yes are you sure? an error was detected in your answer. check for typos, miscalculations, etc. before you submit this item again. submit answer try another version 10 item attempts remaining
Separation into two diametrically opposed social, political, or religious movements.
What is meant by polarization?Polarization, a property of transverse waves, describes the geometric orientation of the oscillations The direction of the oscillation in a transverse wave is the opposite of the wave's motion direction. A simple example of a polarised transverse wave is vibrations along a taut string, as a guitar string. Depending on how the string is pulled, the vibrations can be horizontal, vertical, or at any angle perpendicular to the string. Since the displacement of the oscillating particles always occurs in the direction of the wave's propagation, polarisation does not occur in longitudinal waves, such as sound waves in a liquid or gas.
To know more about polarization, check the link below:
brainly.com/question/3040056
#SPJ4
define the terms acid and base. also, define ph and describe the relationship between ph and the h concentration of a solution.
Acid is sour taste, corrosive and has lots of H+, while base is soapy and has lots of OH-. A pH is degree to measures how acid or base a solution is. The more H+ ions, the more acidic it is and the lower the pH will be.
Acids and basesThe terms acid and base describe chemical characteristics of the substances. The properties of acids are as follow :
Acid has corrosive traitsAcid has sour tasteAcid turn the litmus from blue to redAcid produces hydrogen (H+) ions when it is added to waterFor example : lemon, vinegar and others
While base (alkalies) has these properties :
Base is soapy or feel slippery to touchBase change the litmus from red to blueBase split to form hydroxide ions or OH- as added to waterFor example : soap and many more
To measure the strength of the acids and bases, we can see from the pH scale. pH stands for potential or power of hydrogen. The pH scale is range from 0 to 14. Acids have a pH below 7, bases have a pH above 7 while pH 7 is said to be neutral.
Thus, the more H+ ions, the more acidic it is and the lower the pH will be.
Learn more about acid and base at:
https://brainly.com/question/16936021
#SPJ4
Which of the following is a heteropolysaccharide? A) amylopectin
B) cellulose
C) pectin
D) chitin
E) none of the above
C): Pectin is a heteropolysaccharide.
Pectin is a heteropolysaccharide, which is a complex carbohydrate made up of different types of monosaccharides. It is commonly found in the cell walls of plants and is used as a gelling agent in the food industry. Amylopectin and cellulose are both homopolysaccharides, meaning they are made up of only one type of monosaccharide (glucose). Chitin is a polymer of N-acetylglucosamine, which is a type of amino sugar, but it is not classified as a heteropolysaccharide.
You can learn more about Pectin at
https://brainly.com/question/24100150
#SPJ4