draw a circuit consisting of a battery connected to two resistors, r1 and r2, in series with each other and a capacitor c connected across the resistors.

Answers

Answer 1

The circuit consisting of a battery connected to two resistors R₁ and R₂ in series with each other and a capacitor C connected across the resistors can be drawn like the attached diagram.

In the drawn circuit,

A battery with voltage V is connected to two resistors R₁ and R₂ in series with each other and a capacitor C is connected across the resistors.

The positive terminal of the battery is connected to one end of R₂ and one plate of the capacitor while the negative terminal is connected to one end of R₁ and other plate of the capacitor. The other ends of R₁ and R₂ are connected to each other.

The one plate of the capacitor is connected to the positive terminal and the other plate of the capacitor is connected to the negative terminal of the battery.

Learn more about circuits here

brainly.com/question/27206933

#SPJ4

Draw A Circuit Consisting Of A Battery Connected To Two Resistors, R1 And R2, In Series With Each Other

Related Questions

Medical applications of ultrasound use frequencies up to 2.00 × 10^7 hz. What is the wavelength of this frequency in 20 °c air?

Answers

The wavelength of the ultrasound wave in 20 °c air is 1.715 * 10⁻⁵ m.

What is the relationship between wavelength and frequency of a wave?

The frequency of sound is the number of complete oscillations per second.

The wavelength is the distance between successive positions in the wave.

Velocity of sound is the distance covered per second.

The frequency and wavelength of a wave are related by the formula given below:

Velocity = frequency * wavelength

The velocity of sound in 20°C air = 343 m/s

frequency of the sound wave = 2.00 × 10⁷ hz or 2.00 × 10⁷ s⁻¹

wavelength = velocity/frequency

wavelength = 343 /  2.00 × 10⁷

wavelength = 1.715 * 10⁻⁵ m

In conclusion, the wavelength of the ultrasound wave is determined from the ratio of the velocity and the frequency of the sound.

Learn more about wavelength at: https://brainly.com/question/26637292

#SPJ1

A laser is shone through a double slit and a particular interference pattern is observed on a screen some distance away. If the separation between the openings is increased, the distance between the fringes will

Answers

If the separation between the openings in a laser is increased, then the distance between the interference fringes decreases

What is Interference fringe ?

Interference fringe refers to bands caused by different lights which can be found in phase or not each other.

Distances between laser fringes are short which is due to light wavelength.The interference fringes can be estimated by knowing slit separation and wavelength.

In conclusion, if the separation between the openings in a laser is increased, then the distance between the interference fringe decreases

Learn more about Interference fringe here:

https://brainly.com/question/14264436

#SPJ4

The north-pole end of a bar magnet is held near a stationary positively charged piece of plastic. How is the plastic affected?.

Answers

When the north-pole end of a bar magnet is held near a stationary positively charged piece of plastic, it remains unaffected.

What is a bar magnet?

A bar magnet is made of ferromagnetic substance that produces

magnetic field.

What are the properties of a bar magnet?

Magnets attract ferromagnetic materials like iron, cobalt and nickel.Like poles repel each other and unlike poles attract each other.The strength of both poles is always the same.When a magnetic material is kept in contact with a bar magnet it acquires the magnetic property.Some materials like gold, silver and water get repelled by magnets.

Since plastic is not a ferromagnetic material or any other material like gold and silver ,they remain unaffected in the presence of magnetic field.

To learn more about magnetic field: https://brainly.com/question/23096032

#SPJ4

Which statement about income is not true?
A. Income should increase over your career.
B. Income is part of a budget.
C. Income can come from multiple sources.
D. Income only includes salary.

Answers

Answer: d) income only includes salary

Explanation:

i just took a test for economics and personal finance and got it correct

The statement that "Income only includes salary " is not true.

Income is the money that an individual or organization receives in return for their services or goods. 

Depending on the context—such as taxation, financial accounting, or economic analysis—income may have a variety of definitions.

For the majority of people, their total earnings include their wages and salaries, investment returns, pension payments, and other receipts. 

For businesses, income refers to the money made from selling goods and services as well as any interest or dividends paid on the company's cash holdings and reserves.

So, the amount of money, property, and other value transfers received over a predetermined period in return for goods or services is often referred to as "income."

That's why income does not include only salary.

Hence Statement (D) about the income is not true.

Learn more about income here https://brainly.com/question/11880976

#SPJ1

Two 1-d waves of amplitude a and period t and constant phase 0 are superposed. If wave 1 travels 13. 5 wavelengths farther than wave 2, will the interference be:________

Answers

Two 1-d waves of amplitude a and period t and constant phase 0 are superposed. If wave 1 travels 13. 5 wavelengths farther than wave 2,  the interference is 3/2π.

Interference of light is the phenomena of multiple light waves interfering with each other under certain circumstances, causing the mixed amplitudes of the waves to both boom or lower.one of the exceptional examples of interference is demonstrated by the light contemplated from a film of oil floating on water.

The phenomenon of addition or superposition of mild waves which produces an increase in intensity at some factors and a decrease in depth at a few other points are known as interference of light.

The intensities of light at exceptional factors of the medium are distinctive. At a few factors of the medium, depth is most and at a few different points intensity is maximum ( about 0) This phenomenon is called the interference of mild waves, the interference is known as negative interference.

Learn more about the interference of light here:-https://brainly.com/question/25310724

#SPJ4

A bowling ball accidentally falls out of the cargo bay of an airliner as it flies along in a horizontal direction. As seen from the ground, which path would the bowling ball most closely follow after leaving the airplane?

Answers

The path the bowling ball would most closely follow after leaving the airplane is horizontal direction.

Path of the bowling ball

Based on the law of inertia, which is the reluctance of an object to stop moving once in motion or start moving when it is at rest.

The bowling ball will maintain the path of the airline in the first few seconds of fall, after which it will change its path to vertical direction.

Thus, the path the bowling ball would most closely follow after leaving the airplane is horizontal direction.

Learn more about horizontal direction here: https://brainly.com/question/2534565

#SPJ1

Upon inspiration, what is the name of the air in the conducting zone that is not available for gas exchange?.

Answers

Dead space is the name of the air in the conducting zone that is not available for gas exchange.

What is conducting zone?

The conducting zone consists of all of the structures that provide passageways for air to travel into and out of the lungs.

The conducting zone is part of the respiratory system. It serves as a route for incoming and outgoing air and filtering debris and pathogens from the incoming air.In order to compensate for the reduction in gas exchange in the respiratory system, ventilation will increase

The volume of air that is inhaled that does not take part in the gas exchange is dead space. Because it either remains in the conducting airways or reaches alveoli that are not perfused or poorly perfused.

Dead space volume is air in the conducting airways that does not participate in gas exchange between the alveoli and blood.

Hence,

Dead space is the name of the air in the conducting zone that is not available for gas exchange.

Learn more about conducting zone here:

https://brainly.com/question/14171709

#SPJ4

In the absence of a strong magnetic field), what is the chief factor that determines what type of electromagnetic radiation objects give off:____.

Answers

The chief factor that determines what type of electromagnetic radiation that objects give off in the absence of a strong magnetic field is their temperature.

What is the radioactive activity?

The radioactive activity refers to the energy that a atomic nucleus can release in a given period of time due to the emission of different types of radiation.

This activity (radioactive activity) increases as temperature rises due to a higher collision of subatomic particles that form molecules.

In conclusion, the chief factor that determines what type of electromagnetic radiation in the absence of a magnetic field is temperature.

Learn more about the radioactive activity here:

https://brainly.com/question/11117468

#SPJ1

A box of mass 8 kg slides across a frictionless surface at an initial speed 1.5 m/s into a relaxed spring of spring constant 69 N/m.

Answers

Time for which box will remain in contact with spring is 1.1 sec

Given:

mass of box = 8 kg

initial speed of box = 1.5 m/s

spring constant = 69 N/m

To Find:

time for which box will remain in contact with spring

Solution: The time taken to complete one oscillation is called the time period. where m is the mass, and k is the spring constant.

Time period is given as

t = π √m/k

t = 3.14 √8/69

t = 1.1 sec

So time for which box will remain in contact with spring is 1.1 sec

Learn more about Time here:

https://brainly.com/question/26451487

#SPJ4

A radar receiver indicates that a pulse return as an echo in 20 μs after it was sent. How far away is the reflecting object? (c = 3.0 × 10^8 m/s)

Answers

A radar receiver indicates that a pulse return as an echo in 20 μs after it was sent. The reflecting object would be 3000 m away .

Phenomenon of hearing back our own sound is called an echo. It is due to successive reflection of sound waves from the surfaces or obstacles of large size. To hear an echo, there must be a time gap of 0.1 second in original sound and the reflected sound.

Given

time =  20 μs = 20 * [tex]10^{-6}[/tex] s

let distance to the reflecting surface be = x

total distance travelled by pulse will be  = 2x

speed = 3.0 × [tex]10^{8}[/tex] m/s

distance = speed * time

2x = 3.0 × [tex]10^{8}[/tex] * 20 * [tex]10^{-6}[/tex]

   x = 3000 m

The reflecting object would be 3000 m away

To learn more about echo here

https://brainly.com/question/14861578?referrer=searchResults

#SPJ4

A 1-oz bullet is traveling with a velocity of 1400 ft/s when it impacts and becomes embedded in a 5-lb wooden block. The block can move vertically without friction. Determine (a) the velocity of the bullet and block immediately after the impact, (b) the horizontal and vertical components of the impulse exerted by the block on the bullet.

Answers

   After impact velocity = 14.968 ft/s

Weight and mass of Bullet and wooden block:

Bullet: w = 1oz = 1/16 lb m = 0.001941 lb

wooden block : W = 5lb M = 0.15528 lb

velocity of block and bullet immediately after impact:

Σmv1 + ΣImp = mv2

Resolving vertical component

( m× v₀cos30⁰) + 0 = ( m+M) v'

v' = ( m× v₀cos30⁰)/ (m+M)

v' = 14.968 ft/s

Horizontal and vertical component of the impulse exerted by block on the bullet:

   Here we will apply the principle of impulse and momentum.

 Horizontal component:

          -mv₀ cos30⁰ + RxΔt  =0

                                 RxΔt = mv₀sin30⁰

                                          = 0.001941 × 1400sin30⁰

                                   RxΔt = 1.3587 lb.s

         Vertical component:

                           -mv₀cos30⁰  + RyΔt =  -mv'

                                     RyΔt = m( v₀cos30⁰-v')

                                     RyΔt = 0.001941(1400cos30⁰ - 14.968)

                                              = 2.32 lb.s

     Learn more about impact here:

            https://brainly.com/question/15008937

                  #SPJ4  

What relation can you state about the acceleration of the charge and it mass? Describe the mathematical relation, such as "directly proportional ", or "inversely proportional

Answers

Relation can you state about the acceleration of the charge and it mass is they are inversely proportional .

According to the question

Newton's second law :

Newton's second law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.

F = m * a

a = [tex]\frac{F}{m}[/tex]  

Relation can you state about the acceleration of the charge and it mass is

According to Newton's second law of motion, acceleration is inversely proportional to the mass when the force is a constant.

The acceleration is directly proportional to the force when the mass remains constant.

Hence, Relation can you state about the acceleration of the charge and it mass is they are inversely proportional .

To know more about acceleration and mass here:

https://brainly.com/question/1046166

#SPJ4

A brick and a feather fall to the earth at their respective terminal velocities. Which objectexperiences the greater force of air friction?

Answers

Answer:

Under the reasonable assumption that the brick has more mass than the feather, the brick experiences a greater force of air friction.

Explanation:

Objects at terminal velocity, only under the influence of gravity, have maximized their speed and have an acceleration of zero.  Thus, neither object is accelerating.

Recall Newton's second law: [tex]\sum {\vec {F}}=m \vec {a}[/tex]

Since acceleration for each object is zero, the sum of the force acting on each of those objects must also be zero.

Since the only forces acting on the objects are gravity and the force of air friction, in order to zero out, the force of air friction must be equal in magnitude and opposite in direction to the force of gravity.

Recall that near the surface of the earth, [tex]F_{gravity}=mg[/tex], so the Force of Gravity acting on an object is directly proportional to the object's mass.  (A similar argument could be made even if this were not taking place on the surface of the earth, so long as the objects were the same distance from the object providing gravitational influence).

If the masses of the objects are different, the object with the greater mass will experience a larger force of gravity, and hence a larger force of air friction at terminal velocity.  

Under the reasonable assumption that the brick has more mass than the feather, the brick experiences a greater force of air friction.

PLEASE HELP QUICK! Why does thermal energy increase on a roller coaster? Especially when it goes up the second hill?

Answers

as friction does negative work, the mechanical energy decreases. The work done by friction transforms mechanical energy into heat, a non-mechanical form of energy. As a result, the temperature of the track and the wheels increase.

How many watts of power are needed to exert a force of 30 n over a distance of 100 m for 1 minute?

Answers

Power require in Watts is 50 watts

Given:

Force = 30 N

Distance = 100m

Time for which force applied = 1 min = 60 sec

To Find:

Power

Solution: A watt is a unit of power. It is the amount of energy an item needs to function; the rate at which energy is consumed. One watt is equivalent to electricity flowing at a rate of one joule (unit of energy) per second

P = W/t

where W is work done by force and t is the time for which force is applied

W = F x d

W = 30 x 100 = 3000

P = 3000/60 = 50 watts

So Power require in Watts is 50 watts

Learn more about Power here:

https://brainly.com/question/1634438

#SPJ4

I need to know how to solve: finding magnitudes of forces related to a sum of three vectors

Answers

The solution is (v, u) = (- 585.709, 593,034). Please notice that the value of v only means that the direction of the real vector is antiparallel to the supposed one.

What are the magnitudes of two vectors to get the zero vector by vector sum?

According to the definition of vector sum and vectors in rectangular form, we must solve the following vector equation:

(0, 0) = 205 · (cos 23°, - sin 23°) + v · (- cos 75°, sin 75°) + u · (- cos 55°, - sin 55°)

(0, 0) = (188.703, 80.100) + v · (- 0.259, 0.966) + u · (- 0.574, 0.819)

(- 188.703, - 80.100) =  v · (- 0.259, 0.966) + u · (- 0.574, 0.819)

Then, we must solve the following system of linear equations:

- 0.259 · v - 0.574 · u = - 188.703

0.966 · v + 0.819 · u = - 80.100

The solution is (v, u) = (- 585.709, 593,034). Please notice that the value of v only means that the direction of the real vector is antiparallel to the supposed one.

To learn more on vectors: https://brainly.com/question/13322477

#SPJ1

(10%) Problem 2: The frequency range for AM radio is 540 to 1600 kHz. The frequency range for FM radio is 88.0 to 108 MHz.

Answers

188m - 556m is the wavelength range for AM radio.

2.77 - 3.40m is the wavelength range for FM radio.

1) For AM radio

f(max) = 1600 × 10³ Hz

f(min) = 540 ×10³Hz

c = fλ

λ = c/f where,

c = speed of light

f = frequency

λ= wavelength

So,

λ(min) = 3 × [tex]10^{8}[/tex] / 1600 × 10³ = 188 m

λ(max) = 3 × 10⁸/540 ×10³ = 556 m

So wavelength range of AM radio is 188 m - 556m

2) For FM radio

f(max) = 108 × 10⁶ Hz

f(min) = 88 × 10⁶ Hz

λ(min)  = 3 × 10⁸ / 108 × 10⁶ = 2.77 m

λ(max) = 3 × 10⁸ / 88 × 10⁶ = 3.40 m

So wavelength range of FM radio is 2.77m - 3.40m

Learn more about frequency here https://brainly.com/question/10728818

#SPJ1

An airplane traveling at speed, 180 m/s, emits sound at a frequency of 2 000 Hz. What is the change in frequency (in Hz) heard by a stationary listener as the plane approaching and passing by

Answers

Answer:

As the plane moves toward the listener, the apparent frequency of the plane would be [tex]4250\; {\rm Hz}[/tex] ([tex]2250\; {\rm Hz}[/tex] higher than the frequency at the source.)

As the plane moves away from the listener, the apparent frequency of the plane would be approximately [tex]1308\; {\rm Hz}[/tex] (approximately [tex]692\; {\rm Hz}[/tex] lower than the frequency at the source.)

Assumption: the speed of sound in the air is [tex]340\; {\rm m\cdot s^{-1}}[/tex].

Explanation:

Crests of this sound wave travel toward the listener at a constant [tex]v = 340\; {\rm m\cdot s^{-1}}[/tex]. Since there is a pause of [tex]t = 1 / f = (1/2000)\; {\rm s}[/tex] between every two consecutive crests of this sound wave, the distance between each pair of consecutive crests would be:

[tex]\begin{aligned}\lambda &= \frac{v}{f} \\ &= \frac{340\; {\rm m \cdot s^{-1}}}{2000\; {\rm s^{-1}}} \\ &= 0.17\; {\rm m} \end{aligned}[/tex].

Hence, if the aircraft wasn't moving, the first crest would have a head start of [tex]\lambda = 0.17\; {\rm m}[/tex] relative to the second one. This head start would ensure that the first crest arrive [tex]t = \lambda / v = 0.17\; {\rm m} / (340\; {\rm m \cdot s^{-1}}) = (1/2000)\; {\rm s}[/tex] earlier than the second crest.  

However, at a speed of [tex]v_{\text{s}} = 180\; {\rm m\cdot s^{-1}}[/tex], the aircraft would have travelled an additional [tex]v_\text{s}\, t = 180\; {\rm m\cdot s^{-1}} \times (1/2000)\; {\rm s} = 0.09\; {\rm m}[/tex] within that [tex]t = (1 / 2000)\; {\rm s}[/tex].

If the aircraft was travelling towards the listener, the head start of the first crest over the next one would be reduced to [tex]\lambda - v_\text{s}\, t =[/tex][tex]0.17\; {\rm m} - 0.09\; {\rm m} = 0.08\; {\rm m}[/tex]. The first crest would arrive earlier than the second one by [tex](\lambda - v_{\text{s}}\, t) / (v) = (0.08\; {\rm m}) / (340\; {\rm m\cdot s^{-1}}) \approx 0.000235\; {\rm s}[/tex].In contrast, if the aircraft was travelling away from the listener, the head start of the first crest over the next one would be increased to [tex]\lambda + v_\text{s}\, t = 0.17\; {\rm m} + 0.09\; {\rm m} = 0.26\; {\rm m}[/tex]. The first crest would arrive earlier than the second one by [tex](\lambda + v_{\text{s}}\, t) / (v) = (0.26\; {\rm m}) / (340\; {\rm m\cdot s^{-1}}) \approx 0.000765\; {\rm s}[/tex].

In other words, if the aircraft was moving towards the listener, the period of the sound would appear to the listener to be approximately [tex]0.000235\; {\rm s}[/tex]. in contrast, if the aircraft was moving away from the listener, the period of the sound would appear to the listener as approximately [tex]0.000765\; {\rm s}[/tex].

Therefore:

When the aircraft moves toward the listener, the listener would hear a frequency of [tex]f = 1 / t \approx 1 / 0.000235\; {\rm s} = 4250\; {\rm Hz}[/tex].When the aircraft moves away from the listener, the listener would hear a frequency of approximately [tex]f = 1 / t \approx 1 / 0.000765\; {\rm s} \approx 1307\; {\rm Hz}[/tex].

The light ray is now incident on a glass-air interface, with an angle of incidence in the glass of 45 degrees. What is the angle of light ray emerging from the glass into air

Answers

The ray will not emerge into the air medium from glass medium.

To find the answer, we need to know about the critical angle.

What's critical angle of glass?Critical angle of a medium can be determined from the relation as sinФ = 1/n, n = refractive index of that medium.As glass has refractive index of 1.5, so Critical angle = sin⁻¹(1/1.5) = 42 °Why does the light incident at 45° inside a glass not emerge to the air medium?As we got the critical angle of glass is 42°, so the light incident at 45° which is greater than 42° will reflect back into the glass medium instead of emergence into the air medium.

Thus, we can conclude that the light will not emerge into air medium.

Learn more about the critical angle here:

brainly.com/question/15009181

#SPJ4

A car generator turns at 400 rpm (revolutions per minute) when the engine is idling. It has a rectangular coil with 300 turns of dimensions 5.00 cm by 5.22 cm that rotates in an adjustable magnetic field. What is the field strength needed to produce a 24.0 V peak emf

Answers

The field strength needed to produce a 24.0 V peak emf is 0.73T.

To find the answer, we need to know about the expression of emf.

What's the expression of peak emf produced in a rotating rectangular loops?

The peak emf produced in a rotating loops= N×B×A×wN= no. of turns of the loop, B= magnetic field, A= area of loop and w= angular frequencySo, B = emf/(N×A×w)What's the magnetic field applied to the loop, when rectangular coil with 300 turns of dimensions 5.00 cm by 5.22 cm rotates at 400 rpm produce a 24.0 V peak emf?N= 300, A= 5cm × 5.22cm = 0.05m × 0.0522m = 0.00261 m²Emf= 24V, w= 2π×400 rpm= 2π×(400rps/60) = 42 rad/sNow, B= 24/(300×0.00261×42)

B= 24/(300×0.00261×42) = 0.73T

Thus, we can conclude that the magnetic field is 0.73T.

Learn more about the electromagnetic force here:

brainly.com/question/13745767

#SPJ4

A 2. 0mc charge in an external field of 20n/c, north (direction) will experience a force of: ___0. 04____________ newtons, the direction of the force is __north___________

Answers

2. 0 mc charge in an external field of 20n/c, north (direction) will experience a force of 0.4 newtons, the direction of the force is north

Force in an electric field  = charge * electric field

given

charge =  2* [tex]10^{-3}[/tex] C

electric field  = 20 N/C

Force  in an electric field   = 2* [tex]10^{-3}[/tex] * 20

                                            = 0.04 N

since , external field is in north direction then the force must be in north direction because the direction of an electric field at a point is the same as the direction of the electric force acting on a positive test charge

hence,  2. 0 mc charge in an external field of 20n/c, north (direction) will experience a force of 0.4 newtons, the direction of the force is north

learn more about  electric field  

https://brainly.com/question/15800304?referrer=searchResults

#SPJ4

If there is no change in the velocity of the object then it is known to be in ______

a) constant speed
b) uniform acceleration
c) uniform motion
d) non-uniform motion

Answers

OPTION (C) IS CORRECT

ANSWER - UNIFORM MOTION

If there is no change in the velocity of the object then it is known to be in UNIFORM MOTION.

EXPLORE MORE:-

EXAMPLE - A CAR COVERS A DISTANCE OF 15 KM WE'D EVERY 2 HOURS

FOR AN UNIFORM MOTION, ACCELERATION IS ZERO , AS THERE IS NO CHANGE IN VELOCITY....

-THANKS.!!

An electron moving through an electric field is observed to have an acceleration of 1.20 1016 m/s2 in the x direction. What is the magnitude and the direction of the electric field that produces this acceleration

Answers

The magnitude is 5.69 × 10^4  N/C and the direction is  opposite to the acceleration of electron.

Equation of force on a charge is -

                F = ma

→             qE = ma

The acceleration of an electron is 1.201016 m/s².

→         E =  ma/q

  plug in the values

          E = 9.11 × 10^-31 kg × 1×10^16 m/s² i / -1.6 × 10^-19 C

          E = 5.69 × 10^4  N/C   (-i)

so, magnitude is 5.69 × 10^4  N/C  and field is along negative x-axis

Thus, it has opposite direction to the acceleration of electron.

Learn more about electron here:

 https://brainly.com/question/16965093

        #SPJ4

An astronomer discovers a new star and wants to measure its temperature. She would typically do this by:____.

Answers

An astronomer that discovers a new star and wants to measure its temperature would typically do this by means of a blackbody curve to find the maximum wavelength.

What is the maximum wavelength peak?

The maximum wavelength peak is the portion of the wave where a given chemical substance/object exhibits its maximum strongest value of photon absorption.

On the other hand, the blackbody curve of an object is the graphical diagram that shows the distribution of the radiation emitted by this particular substance.

In conclusion, An astronomer that discovers a new star and wants to measure its temperature would typically do this by means of a blackbody curve to find the maximum wavelength.

Learn more about the maximum wavelength here:

https://brainly.com/question/13227011

#SPJ1

What is the radial distance between the 500 v equipotential surface and the 1000 v surface?.

Answers

Answer: the radial distance between the 500-v equipotential surface and the 1000 v surface will be 8.91*106 times the charge Q.

Explanation: To find the answer, we have to know more about the equipotential surfaces.

What are equipotential surfaces?An equipotential surface is the locus of all points which have the same potential due to the charge distribution.Any surface in an electric field, at every point of which, the direction of electric field is normal to the surface can be regarded as equipotential.We have the equation for electric potential as,

                            [tex]V=\frac{Qk}{r}[/tex]  , where k is equal to 1/(4π∈₀) =[tex]8.99*10^9[/tex] .

equation for radial distance will be,

                          [tex]r_d=r_1-r_2[/tex]

How to solve the problem?For the first surface, we can write the equation of potential as,

                   [tex]500V=\frac{Qk}{r_1} \\thus, r_1=\frac{Qk}{500V}= (1.79*10^7 *Q) m[/tex]

For the second surface, we can write the equation of potential as,

                  [tex]1000V=\frac{Qk}{r_2}\\ r_2= \frac{Qk}{1000V} =(8.99*10^6*Q) m[/tex]

Thus, the radial distance will be,

                  [tex]r_d=1.79*10^7Q-8.99*10^6Q=(8.91*10^6*Q)m[/tex]

Thus, we can conclude that, the radial distance between the equipotential surface of 500V and 1000V will be,8.91*106 times the charge Q.

Learn more about the equipotential surface here:

https://brainly.com/question/28044747

#SPJ4


5.1 What is the nucleus composed of ?

Answers

Answer:

5.1 The DNA double helix is the most recognizable nucleic acid structure, but these are ribozymes.

A 0.10-m 3 0.20-m 3 0.30-m block is suspended from a wire and is completely under water. What buoyant force acts on the block

Answers

The buoyant force acting on the block is 58.8 N.

Calculation:

The dimensions of the block are given as 0.10 m, 0.20 m and 0.30 m.

The volume of the block will be = 0.10 × 0.20 × 0.30 m³

                                                     = 0.006 m³

We know that,

W = mg                                 .....(1)

where,

W = weight of the block

m = mass of the block

g = acceleration due to gravity = 9.8 m/s²

We also know that mass is proportional to density and volume

m = ρ.V                                  .....(2)

Substituting the equation (2) in (1)

W = ρ.V.g                               .....(3)

Density of water, ρ = 1000 kg/m³

Force is the net weight acting on the block

F = W = ρ.V.g

F = 1000 × 0.006 × 9.8

F = 58.8 N

Therefore, the buoyant force acting on the block is 58.8 N.

Learn more about buoyant force here:

https://brainly.com/question/21990136

#SPJ4

A 1436. 32' line has an azimuth of 178 52 13. What is the latitiude and departure of the line?

Answers

Latitude of the line will be = 1436.033

Departure of the line will be   = 28.152

Given

let line be = a = 1436. 32

azimuthal be = x = 178° 52' 13''

This line must have two components , one is horizontal component which is its latitude and other will be vertical component which is departure . Resolving both the components we get,

latitude = a*cos(178° 52' 13'')

             = 1436. 32 * cos(178° 52' 13'')

             = 1436. 32 * (- 0.9998)                              

latitude = 1436.033

departure  =  a * sin (178° 52' 13'')

                  = 1436. 32  *  0.0197

  departure  = 28.152

learn more about latitude :

https://brainly.com/question/5957229?referrer=searchResults

#SPJ4

How many excess electrons must be distributed uniformly within the volume of an isolated plastic sphere 26.0 cm in diameter to produce an electric field of 1440 N/C just outside the surface of the sphere

Answers

a metaphor for generosity and joy and joy and joy and joy organised a large wedding guests had to choose their meal from beef chicken tikka and a kind young women in the streets of St

The number of excess electrons needed to be distributed uniformly in the sphere to produce the given electric field is 1.69*10^(10).

What is an electric field?

The electric force exerted on a unit charge is called the electric field.

For a sphere of uniform charge density, the magnitude of the electric field on its surface is given by,

E=k*q/r^2

where E is the magnitude of the electric field, k is the coulomb's constant which has a value of 9*10^9 N m^(2) C^(-2), and q is the total charge of the sphere, and r is the radius of the sphere.

The radius of the sphere is half of the diameter. Given the diameter of the sphere is 26.0 m, the radius of the sphere r=26.0/2 cm or r=13.0 cm.

It is given that E=1440 N/C, r=13.0 cm, and the value of k is 9*10^9 N m^(2) C^(-2). Substitute these values in the formula of the electric field and solve it to get the value of the total charge on the sphere.

Note: 1 cm = 0.01 m.

1440 (N/C)= (9*10^9 N m^(2) C^(-2))*q/( 13 cm)^2

1440 (N/C)= (9*10^9 N m^(2) C^(-2))*q/( 13*0.01 m)^2

1440 ( N/C)= (532.54*10^(9) N C^(-2))*q

q=1440/(532.54*10^(9)) C

q=2.704*10^(-9) C

Since the charge is quantized, the total charge inside the sphere is the integral multiple of an elementary charge. In the given case, the value of that elementary charge is 1.6*10^(-19) C. The total charge is then given by,

q=ne

where q is the total charge, n is the number of elementary charges and e is the value of the elementary charge.

The value of q is 2.704*10^(-9) C and the value of e is 1.6*10^(-19) C.

Substitute these values in the formula of total charge and solve it to get the number of elementary charges.

2.704*10^(-9) C =n*1.6*10^(-19) C

n=2.704*10^(-9)/ 1.6*10^(-19)

n=1.69*10^(10)

Learn more about the electric field here:

https://brainly.com/question/14632877

#SPJ4

You're holding an open house for Brenda. Walt and Mary walk in and ask you for a flyer that gives details about the property. At this point, what's your relationship with Walt and Mary

Answers

Walt and Mary are my Customers at this point.

To construct proper client relationships you need to: greet clients and approach them in a way that is herbal and suits the character scenario. show customers that you recognize what their desires are. be given that a few humans may not want your merchandise and concentrate on constructing relationships with people who do.

Use the time period clients, with an apostrophe before the “s” to expose a possessive form for a single consumer. Use the time period clients', with an apostrophe after the “s” to show the possessive plural shape of a couple of patrons. Do now not use an apostrophe if there's no possessive indication needed.

The definition of a consumer is a person who buys services or products from a store, restaurant, or different retail vendor. An example of a patron is someone who is going to an electronics save and buys a tv. (Casual) a person, mainly one engaging in a few types of interaction with others.

Learn more about the Customers herehttps://brainly.com/question/24448358

#SPJ1

Other Questions
Calculate the Taylor polynomials T2 and T3 centered at a = 0 for the function f(x) = 13 tan(x). (Use symbolic notation and fractions where needed.) T2(x) = T3(x) = Regarding the enzyme in Part 2, before the first one terminated. of these would be required if a new round of DNA replication began Which of the following is true of the newly synthesized daughter chromosomes? A. Each chromosome contains one parental and one newly synthesized DNA strand. B. They remain single-stranded until after septation. C. Each strand on each chromosome contains interspersed segments of new and parental DNA. D. They are both double-stranded, but nonidentical, because of crossing over. E. One consists of a double helix of two new DNA strands, whereas the other is entirely parental. using the volume you just calculated, determine the moles of edta that reacted with the calcium ions. Question completion status:you are the front desk manager and the hotel is sold out for tonight. you have bus groups checking into the hotel around 4 o'clock and it is going to be a very busyshift. housekeeping should be able to have all the rooms clean for the group as long as they are aware of the rooms that the front desk has assigned to the grouphow would the manager determine what rooms the group should be assigned to? Payne Corporation has the following accounts as of December 31, 2018: Total Assets $ 60,000 Total Liabilities 20,000 Total Equity 40,000 Compute the debt to equity ratio at December 31, 2018. Question 8Isaiah is driving at a constant speed on a road trip. On one full tank of gas, Isaiah can drive 360 miles. After drivingfor 3 hours, Isaiah stops for a snack and sees that he has used of a tank of gas. After that, he continues driving36 more miles at the same speed. For how much more time can Isaiah drive before he runs out of gas? Includeunits in your answer. The 1400-kg mass of a car includes four tires, each of mass (including wheels) 34 kg and diameter 0.80 m. Assume each tire and wheel combination acts as a solid cylinder. A. Determine the total kinetic energy of the car when traveling 92 km/h . B. Determine the fraction of the kinetic energy in the tires and wheels. C. If the car is initially at rest and is then pulled by a tow truck with a force of 1400 N , what is the acceleration of the car? Ignore frictional losses. D. What percent error would you make in part C if you ignored the rotational inertia of the tires and wheels? Find the 15th term of the geometric sequence 2,6,18,... Give an example of a vector field F(x, y) in 2-space with the stated property F is constant Fx, y)- Mark any/all combinations that will produce a precipitate. Aqueous solutions of iron (III) chloride and ammonium iodide Aqueous solutions of potassium carbonate and magnesium acetate Aqueous solutions of lithium nitrate and sodium fluoride Loueous solutions of calcium nitrate and sodium sulfate When you mix two liquids, the reaction vessel suddenly feels cold. What does this observation suggest? Mark any/all statements that apply. An exothermic reaction has occurred. An endothermic reaction has occurred. The chemicals released cold. The chemicals took in energy from the surroundings. A gas was produced Question 2 1 pts You react propane (C3Hz) with O2 gas. Mark any/all that apply. H2O is a product of the reaction 2 A scientist is studying how two species of sparrows interact on an island. This is a study at what level of ecology?A. populationB. communityC. worldD. genetics Using the bond dissociation energies given, calculate DH for the following reaction. CH3CH2-Br H2O CH3CH2-OH HBr + + DH KJ/mol 285 Bond A-B CH3CH2-Br H-OH CH3CH2-OH H-Br 498 393 368 Multiple Choice +108 KJ/mol -130 KJ/mol O +108 KJ/mol C) -130 KJ/mol O -22 KJ/mol +22 KJ/mol describe how you have worked with another person to achieve a goal Problem 6: String Util (10 points) Make API (API design) All software rely on data modeling to represent the things and objects within the algorithm. It's important that developers and end users can inspect the state of these data models to verify the software's results. Humans read data as text, so it is important that developers can translate data into text to evaluate the state. This is commonly done using a method to stringify the data.You're tasked to implement a String Utility class for Java that includes the following API (Application Programming Interface). Utility classes are typically helper classes that contain a collection of related static methods. For example, Math is a utility class. StringUtil Method API: Modifier and Type Method and Description static String toString(double data) Returns data as a String static String toString(float data) Returns data as a String static String toString(int data) Returns data as a String static String toString(long data) Returns data as a String static String toString(char data) Returns data as a String static String toString(boolean data) Returns data as a String Facts Your StringUtil class implementation should not have a main method. NO Scanner for input & NO System.out for output! Input The StringUtil class will be accessed by an external Java Application within Autolab. This Java app will send data in as arguments into each of the methods parameters. Output The StringUtil class should return the correct data calculations back to the invoking client code Sample Method Calls Sample Method Returns (Not Printouts) toString(1.0); toString(1.0f); toString(1); toString(1L); toString('1'); toString(true); "1.0" "1.0" "1" "1" "1" "true" the star altair has an emission spectrum true or false Select all of the following that provide an alternate description for the polar coordinates (r,0) (-1, ): (r,0) (1.2m) (r,0) (-1,2T) One way to do this is to convert all of the points to Cartesian coordinates. A better way is to remember that to graph a point in polar coordinates: ? Check work . If r 0, start along the positive z-axis. . If r 0, rotate counterclockwise. If < 0, rotate clockwise determine if each set is orthogonal, orthonormal, or neither. if it orthogonal, normalize the vectors to produce an orthonormal set Congress and the supreme court have interpreted the commerce clause broadly, expanding the areas open to federal action. do you think this is appropriate rodgers company gathered the following reconciling information in preparing its may bank reconciliation. calculate the adjusted cash balance per books on may 31. At a soccer tournament 121212 teams are wearing red shirts, 666 teams are wearing blue shirts, 444 teams are wearing orange shirts, and 222 teams are wearing white shirts. For every 222 teams at the tournament, there is 111 team wearing \_\_\_\_____\_, \_, \_, \_ shirts. Choose 1 answer: Choose 1 answer: (Choice A) A Red (Choice B) B Blue (Choice C) C Orange (Choice D) D White