draw the lewis structure for sulfate polyatomic ion. how many equivalent resonance structures can be drawn?

The ranking of the given molecules from weakest to strongest intermolecular forces is:  H2S < H2Se < H2Te < H2PO

This ranking is based on the size, dipole moments, and polarity of each molecule, which are factors that contribute to the strength of their intermolecular forces. Also ranking is based on the trend of increasing atomic size down the group. As we move down the group, the atomic size increases which results in larger electron clouds and hence stronger intermolecular forces. 1. H2S: Weakest intermolecular forces due to its small size and relatively low dipole moment. 2. H2Se: Slightly stronger intermolecular forces than H2S because it has a larger size and a higher dipole moment. 3. H2Te: Stronger intermolecular forces due to its larger size and higher dipole moment compared to H2Se and H2S. 4. H2PO: Strongest intermolecular forces because it has a significant dipole moment, making its overall polarity higher than the other molecules listed.

To know more about molecules visit :-

https://brainly.com/question/21263612

#SPJ11

The EDTA species can bind to a transition metal site up to four times.  It can also be used to determine the stoichiometry of a reaction or the electron transfer processes involved.

In the cobalt chloride hexahydrate starting material, the oxidation state of cobalt is +2. This is because the compound is composed of Co2+ cations (cobalt ions with a positive charge of 2+) and chloride anions (negatively charged ions) in a 1:2 ratio. The six water molecules in the compound do not affect the oxidation state of cobalt. Overall, knowing the oxidation state of a metal ion is important in understanding its chemical reactivity and behavior in reactions. It can also be used to determine the stoichiometry of a reaction or the electron transfer processes involved.

learn more about electron here:

https://brainly.com/question/28977387

#SPJ11

When phenol reacts with Br2 in CCl₄ medium, the product formed is 2,4,6-tribromophenol.

A chemical process known as an electrophilic aromatic substitution occurs when an electrophile (an electron-deficient molecule) replaces a hydrogen atom on an aromatic ring.

A vast range of organic molecules, including medicines, dyes, and perfumes, are synthesised using this sort of reaction, which is crucial in organic chemistry. The creation of the highly reactive intermediate known as a sigma complex results from the electrophile's attraction to the aromatic ring's electron-rich pi cloud during the reaction. The synthesis of a new substituted aromatic molecule results from a sequence of proton transfers and rearrangements that this intermediate then experiences. The Friedel-Crafts reactions, halogenation, nitration, and sulfonation are typical electrophilic aromatic replacements.

This is due to the electrophilic substitution reaction that occurs between the phenol reacts and the bromine, resulting in the replacement of hydrogen atoms on the aromatic ring with bromine atoms. The presence of CCl₄ as the medium provides a nonpolar environment for the reaction to take place, facilitating the formation of the desired product.

Learn more about electrophilic aromatic substitution here

https://brainly.com/question/30761476

#SPJ11

A carboxylic acid and a sulfhydryl group can condense to produce a thioester. The reaction involves the removal of a water molecule from the carboxylic acid and the sulfhydryl group.

The resulting molecule has a sulfur atom instead of an oxygen atom in the carbonyl group of the carboxylic acid. Thioesters are important intermediates in biochemistry and can be involved in processes such as fatty acid biosynthesis and protein synthesis. The reaction between a carboxylic acid and a sulfhydryl group is an example of a nucleophilic acyl substitution reaction, where the sulfhydryl group acts as a nucleophile attacking the carbonyl carbon of the carboxylic acid. Overall, this reaction is a key process in the formation of many important biological molecules.

To know more about Carboxylic acid visit:

https://brainly.com/question/31050542

#SPJ11

1650 mg of sodium is equal to 1.65 g. Converting grams of sodium to moles, we get 0.071 mol.

In question one, we are asked to convert 1650 mg of sodium to grams. We know that 1 gram is equal to 1000 milligrams, so we can divide 1650 by 1000 to get 1.65 g.

To convert grams of sodium to moles, we need to use the molar mass of sodium, which is 22.99 g/mol. We can divide 1.65 g by the molar mass to get 0.071 mol.

Finally, to find the percentage, we need to know what we are comparing to. Assuming we are comparing the mass of sodium to the total mass of the substance it is in, we would need to know the mass of the substance. Without this information, we cannot calculate the percentage.

Learn more about molar mass here.

https://brainly.com/questions/31545539

#SPJ11

Based on the description provided, the element that is most likely to be Sample 1, described as a shiny wire, is a metal.

Metals generally exhibit a characteristic property of high luster or shine due to their ability to reflect light efficiently. Metals have free electrons that are able to move and interact with light, resulting in the shiny appearance.

Nonmetals, on the other hand, do not typically display a shiny or lustrous appearance. They often have dull or matte surfaces. Although some nonmetals can be shiny in certain forms, such as iodine or graphite, the description of a shiny wire suggests a metal element.

Therefore, based on the provided information, Sample 1 is most likely an element from the category of metals.

To learn more about element click here, brainly.com/question/31950312

#SPJ11

The linkage isomers of the complex have been shown in the image attached.

In coordination chemistry, a kind of isomerism known as "linkage isomerism" refers to the binding of a separate ligand to the central metal ion via a different atom in the ligand.

In other words, the metal ion is attached to the same collection of atoms, but they are coupled in different ways. We can see that the linkage isomers are attached to the central atom in different ways as shown in the image attached.

Learn more about linkage isomer:https://brainly.com/question/31964801

#SPJ1

The binding energy per nucleon of a mercury atom with an atomic mass of 0.12724 amu/nucleon is calculated to be 7.854 MeV. This value indicates the stability of the nucleus and is important in understanding nuclear reactions.

The binding energy per nucleon of a nucleus can be calculated using the formula:

BE/A = [Z(mp) + (A-Z)mn - M]/A

where BE is the binding energy, A is the atomic mass number, Z is the atomic number, mp is the mass of a proton, mn is the mass of a neutron, and M is the mass of the nucleus.

For Hg-201, Z=80, A=201, and M=201.970617 amu.

The mass of a proton is 1.00728 amu, and the mass of a neutron is 1.00867 amu.

Plugging in these values, we get:

BE/A = [80(1.00728) + (201-80)(1.00867) - 201.970617]/201

BE/A = (80.58304 + 121.28236 - 201.970617)/201

BE/A = 0.12724 amu/nucleon

Therefore, the binding energy per nucleon of Hg-201 is 0.12724 amu/nucleon.

To know more about the binding energy refer here :

https://brainly.com/question/31817434#

#SPJ11

The compound H2N-C-COOH, with two hydrogen atoms attached to the central carbon, is an amino acid.

The compound H2N-C-COOH represents an amino acid. Amino acids are organic compounds that serve as the building blocks of proteins. They contain an amino group (H2N) and a carboxyl group (COOH) attached to a central carbon atom. The presence of the amino and carboxyl groups gives amino acids their characteristic properties and reactivity. In proteins, amino acids are linked together through peptide bonds to form polypeptide chains. These chains then fold and interact to create the complex three-dimensional structures of proteins, which play crucial roles in biological processes.

To learn more about peptide bonds, click here:

brainly.com/question/32355776

#SPJ11

The electron configuration of Cu2+ is [Ar]3d9.

This occurs because when copper loses two electrons to form the Cu2+ ion, one electron is removed from the 4s1 subshell and one from the 3d10 subshell, leaving the configuration [Ar]3d9.

The electron configuration of an atom or ion describes how electrons are distributed among its energy levels or subshells. Copper (Cu) has an atomic number of 29, indicating that it has 29 electrons in its neutral state.

The electron configuration of neutral copper (Cu) is: 1s2 2s2 2p6 3s2 3p6 4s1 3d10. This configuration represents the arrangement of electrons in the different energy levels or subshells of the atom.

The numbers and letters represent the principal energy levels (1, 2, 3, etc.) and the subshells (s, p, d, f) within those energy levels.

When copper forms a +2 ion (Cu2+), it loses two electrons. The electrons that are removed first come from the highest energy level, which is the 4s subshell, before they are removed from the 3d subshell. The reason for this is related to the stability and energy levels of the subshells.

To learn more about energy, refer below:

https://brainly.com/question/1932868

#SPJ11

It will take 0.125 seconds for a 400-watt machine to do 50 Joules of work.

The power (P) of a machine or device is defined as the rate at which work (W) is done or energy is transferred. Mathematically, power is calculated as P = W/t, where P is power, W is work, and t is time.

In this case, we are given that the machine has a power of 400 watts (P = 400 W) and it performs 50 Joules of work (W = 50 J). We need to find the time (t) it takes to do this work.

Rearranging the formula for power, we have t = W/P. Substituting the given values, we get t = 50 J / 400 W = 0.125 seconds.

Therefore, it will take 0.125 seconds for the 400-watt machine to complete 50 Joules of work.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

The balanced chemical equation for the reaction is:2 NH4I(aq) + Hg2(NO3)2(aq) → Hg2I2(s) + 2 NH4NO3(aq)  the correct answer is option (a).

To obtain the net ionic equation, we need to identify the species that are aqueous and are strong electrolytes, and exclude any spectator ions (ions that appear on both sides of the equation and do not participate in the reaction). In this case, all the ions are aqueous and strong electrolytes,Electrolytes are substances that, when dissolved in water or melted, produce ions that can conduct electricity. In aqueous solutions, electrolytes can be classified into two main types:Strong electrolytes: These are substances that completely dissociate into ions when dissolved in water, producing a high concentration of ions and allowing for good electrical conductivity. Examples of strong electrolytes include soluble ionic compounds (such as NaCl, KNO3, CaCl2) and strong acids/bases (such as HCl, HNO3, NaOH).Weak electrolytes: These are substances that only partially dissociate into ions when dissolved.

To know more about electrolytes visit :

https://brainly.com/question/29771118

#SPJ11

The reaction used to prepare esters is esterification, which involves the combination of an alcohol and a carboxylic acid in the presence of a catalyst.

To prepare esters, we typically use a reaction called esterification, which involves the combination of an alcohol and a carboxylic acid in the presence of a catalyst.

The general balanced equation for esterification is:

Alcohol + Carboxylic Acid ⇌ Ester + Water

Here are the balanced equations and structures for the four esters you prepared:

1. Ethyl acetate
Balanced equation: Ethanol + Acetic acid ⇌ Ethyl acetate + Water
Structures:
   CH₃CH₂OH + CH₃COOH ⇌ CH₃COOCH₂CH₃ + H₂O

2. Butyl acetate
Balanced equation: Butanol + Acetic acid ⇌ Butyl acetate + Water
Structures:
   CH₃(CH₂)₂CH₂OH + CH₃COOH ⇌ CH₃COO(CH₂)₃CH₃ + H₂O

3. Isopentyl acetate
Balanced equation: Isopentanol + Acetic acid ⇌ Isopentyl acetate + Water
Structures:
   CH₃CH₂CH(CH₃)CH₂OH + CH₃COOH ⇌ CH₃COOCH₂CH(CH₃)₂ + H₂O

4. Benzyl acetate
Balanced equation: Benzyl alcohol + Acetic acid ⇌ Benzyl acetate + Water
Structures:
   C₆H₅CH₂OH + CH₃COOH ⇌ CH₃COOCH₂C₆H₅ + H₂O

To know more about the esterification refer here :

https://brainly.com/question/16010744#

#SPJ11  

Using the bond dissociation energies The DHº for the given reaction is -108 kJ/mol. when CH3CH2-Br H2O CH3CH2-OH HBr + + DH° KJ/mol 285 Bond A-B CH3CH2-Br H-OH CH3CH2-OH H-Br 498 393 368.

To calculate DHº for the given reaction, we need to use the bond dissociation energies (BDEs) of the bonds broken and formed during the reaction. The reaction involves the breaking of a C-Br bond in CH3CH2-Br and an O-H bond in H2O, and the formation of a C-O bond in CH3CH2-OH and an H-Br bond.

The BDE for C-Br bond is given as 285 kJ/mol, and the BDE for O-H bond is given as 498 kJ/mol. The BDE for C-O bond is calculated by adding the BDE for C-H bond (393 kJ/mol) and the BDE for O-H bond (498 kJ/mol), and then subtracting the BDE for C-H bond (368 kJ/mol) that is not broken in the reaction. This gives a BDE for C-O bond of (393 + 498 - 368) = 523 kJ/mol. The BDE for H-Br bond is given as 368 kJ/mol.

Now, we can calculate the DHº for the reaction using the equation:

DHº = Σ(BDE of bonds broken) - Σ(BDE of bonds formed)

Substituting the BDE values, we get:

DHº = (285 + 498) - (523 + 368)
DHº = -108 kJ/mol

Therefore, the DHº for the given reaction is -108 kJ/mol. The correct answer is option A) -108 kJ/mol.

To know more about bond dissociation energies visit

https://brainly.com/question/28300898

#SPJ11

The pH of the solution made by mixing equal volumes of NaOH and KOH solutions is approximately 11.13 (option C).

First, let's find the pOH of each solution:

pOH of NaOH solution = 14.00 - 11.40 = 2.60

pOH of KOH solution = 14.00 - 10.30 = 3.70

Next, let's find the concentration of hydroxide ions in each solution:

[OH-] of NaOH solution = 10^(-2.60) = 2.51 x 10^(-3) M

[OH-] of KOH solution = 10^(-3.70) = 2.24 x 10^(-4) M

When the two solutions are mixed, their volumes are additive, which means we have a total volume of 2x V, where V is the volume of each solution added. The total concentration of hydroxide ions is found by adding the concentrations of the two solutions:

[OH-]total = [OH-]NaOH + [OH-]KOH

[OH-]total = (2.51 x 10^(-3) M) + (2.24 x 10^(-4) M)

[OH-]total = 2.73 x 10^(-3) M

Now we can find the pOH of the mixed solution:

pOH = -log([OH-]total) = -log(2.73 x 10^(-3)) = 2.562

Finally, we can find the pH of the mixed solution using the equation:

pH + pOH = 14

pH + 2.562 = 14

pH = 11.44

Option C.

For more such questions on hydroxide ions

https://brainly.com/question/31373607

#SPJ11

The pH of the solution is 3.88, which is made by combining 55 ml of 0.060 m hydrofluoric acid with 125 ml of 0.120 m sodium fluoride.

Hydrofluoric acid (HF) is a weak acid and its conjugate base is the fluoride ion (F⁻). When HF is added to an aqueous solution of sodium fluoride (NaF), the HF reacts with NaF to form the conjugate base F⁻ and sodium hydroxide (NaOH) through the following reaction;

HF + NaF → H₂O + Na⁺ + F⁻

The resulting solution contains a mixture of HF and F⁻ ions, making it a buffered solution.

To calculate the pH of the solution, we need to determine the concentration of each species in the solution, as well as the acid dissociation constant (Ka) for HF.

The Ka for HF is 7.2 × 10⁻⁴ at 25°C.

First, we will calculate the moles of HF and F⁻ in each solution;

moles of HF = 0.060 mol/L × 0.055 L = 0.0033 mol

moles of F⁻ = 0.120 mol/L × 0.125 L = 0.015 mol

Next, we need to determine the total moles of F⁻ in the solution:

moles of F⁻ = 0.0033 mol + 0.015 mol = 0.0183 mol

Since F⁻ is the conjugate base of HF, we can use the Henderson-Hasselbalch equation to calculate the pH of the solution;

pH = pKa + log([F⁻]/[HF])

where [F⁻]/[HF] is the ratio of the concentration of F^- to HF.

pKa = -log(Ka) = -log(7.2 × 10⁻⁴) = 3.14

[F⁻]/[HF] = moles of F⁻/moles of HF

[F⁻]/[HF] = 0.0183 mol / 0.0033 mol

[F⁻]/[HF] = 5.55

Substituting into the Henderson-Hasselbalch equation, we get:

pH = 3.14 + log(5.55)

pH = 3.14 + 0.744

pH = 3.88

Therefore, the pH of the solution is 3.88.

To know more about hydrofluoric acid here

https://brainly.com/question/24194581

#SPJ4

The standard molar heat of fusion of ice is 6020 j/mol. The values for qw and ΔE for melting 1 mol of ice at 0°C and 1 atm pressure are 6020 J and 6020 J, respectively.

To calculate qw and ΔE for the melting of 1 mol of ice at 0°C and 1 atm pressure, we need to use the following equations:

qw = nΔHfus

ΔE = qw + PΔV

n = number of moles of ice

ΔHfus = standard molar heat of fusion of ice = 6020 J/mol

P = pressure = 1 atm

ΔV = change in volume = volume of 1 mol of liquid water - volume of 1 mol of ice at 0°C and 1 atm pressure

The change in volume is negligible, as the density of water is very similar to the density of ice, so we can assume that ΔV = 0.

Therefore, qw = nΔHfus = (1 mol) x (6020 J/mol) = 6020 J

And ΔE = qw + PΔV = 6020 J + 1 atm x 0 = 6020 J

So the values for qw and ΔE for melting 1 mol of ice at 0°C and 1 atm pressure are 6020 J and 6020 J, respectively.

To learn more about heat of fusion refer here:

https://brainly.com/question/14053504#

#SPJ11

When 1,3-butadiene is heated with chlorine gas (Cl₂) in water (H₂O), two products are formed: 3-chloro-1-butene and 1,4-dichloro-2-butene.

1,3-Butadiene is a conjugated diene that consists of a four-carbon chain with two double bonds located at positions 1 and 3. Its molecular formula is C₄H₆. 1,3-butadiene is a highly reactive molecule due to the presence of its double bonds, which can participate in a variety of chemical reactions such as addition reactions, Diels-Alder reactions, and polymerization reactions.

The alcohol-containing product is not formed in this reaction. However, 3-chloro-1-butene can be further reacted with water in the presence of a strong acid catalyst to form 3-chlorobut-1-ene-3-ol, which is an alcohol-containing product. Here are the structures of the two products initially formed.

1,3-Butadiene is a colorless, highly flammable gas with a mild aromatic odor. It is an organic compound with the molecular formula C4H6 and has two double bonds. It is commonly used as a monomer in the production of synthetic rubbers, such as styrene-butadiene rubber and nitrile rubber.

To know more about conjugated diene here

https://brainly.com/question/17425564

#SPJ4

The pilot drains a little gas from the bottom of the tank and looks for two layers to check for water.

To check for water in the gas before flying a small airplane, the pilot can drain a little bit of gas from the bottom of the tank and look for two distinct layers.

Water is heavier than gasoline, so it sinks to the bottom of the tank. If there is water in the gas, the pilot will see two layers: gasoline on top and water on the bottom.

The pilot can also use a pipet to take a sample from the top of the tank and look for the same two layers.

Tasting the gas is not a reliable method, as water in the gas can cause the pilot to become sick or dizzy.

Shaking the wings is another method used to check for water, as water will slosh around in the tank and create an imbalance.

It is important to check for water in the gas to prevent engine failure and ensure a safe flight.

For more such questions on gas, click on:

https://brainly.com/question/25736513

#SPJ11

The most common way a pilot checks for water in the gas fore flying a small airplane is by draining a little bit of gas from the bottom of the tank and looking for two distinct layers.

Water is denser than gasoline and will sink to the bottom, creating a visible separation. This is an essential safety measure as water in the fuel system can cause the engine to malfunction or stall mid-flight, leading to potentially dangerous situations. It is crucial for pilots to be vigilant about the presence of water in the fuel system and follow the manufacturer's recommendations for regular maintenance and inspection. Additionally, some modern aircraft have electronic sensors that can detect water in the fuel system, providing an extra layer of safety.

Learn more about gas here:

https://brainly.com/question/18124975

#SPJ11

Krypton is a chemical element with the symbol Kr and atomic number 36. Its name derives from the Ancient Greek term kryptos, which means "the hidden one."

Thus, It is a rare noble gas that is tasteless, colourless, and odourless. It is used in fluorescent lighting frequently together with other rare gases. Chemically, krypton is unreactive.

Krypton is utilized in lighting and photography, just like the other noble gases. Krypton plasma is helpful in brilliant, powerful gas lasers (krypton ion and excimer lasers), each of which resonates and amplifies a single spectral line.

Krypton light has multiple spectral lines. Additionally, krypton fluoride is a practical laser medium.

Thus, Krypton is a chemical element with the symbol Kr and atomic number 36. Its name derives from the Ancient Greek term kryptos, which means "the hidden one."

Learn more about Krypton, refer to the link:

https://brainly.com/question/2364337

#SPJ1

Different types of noise can be distinguished based on their characteristics and sources. Common types of noise include thermal noise, shot noise, flicker noise, and environmental noise. Minimizing each type of noise in an instrument requires specific techniques and approaches tailored to their unique characteristics.

1. Thermal noise: Also known as Johnson-Nyquist noise, it arises due to random thermal motion of electrons in a conductor. It is characterized by a wide bandwidth and follows a Gaussian distribution. To minimize thermal noise, techniques such as cooling the instrument or using low-noise amplifiers can be employed.

2. Shot noise: It results from the discrete nature of electric current due to the flow of individual electrons. Shot noise is more prevalent in low-current systems and can be reduced by increasing the signal strength or utilizing high-bandwidth amplifiers.

3. Flicker noise: Also known as 1/f noise or pink noise, it exhibits a frequency spectrum inversely proportional to frequency. Flicker noise is commonly found in electronic devices and can be minimized by employing high-quality components and shielding techniques.

4. Environmental noise: This type of noise originates from external sources such as electromagnetic interference (EMI) or acoustic vibrations. To minimize environmental noise, strategies include shielding the instrument from EMI, isolating it from vibrations, or using noise-canceling techniques.

Learn more about electromagnetic interference here:

https://brainly.com/question/32635415

#SPJ11

The mutual inductance between the two coils is 19.5 millihenries (mH).

The electromotive force (EMF) induced in a coil is proportional to the rate of change of the magnetic flux passing through the coil. This relationship can be expressed mathematically as:

EMF = -M dI/dt

where EMF is the induced EMF, M is the mutual inductance between the two coils, I is the current in the first coil, and dI/dt is the rate of change of the current.

In this problem, we are given the induced EMF and we need to find the mutual inductance. We can rearrange the equation as follows:

M = -EMF / (dI/dt)

We are not given the rate of change of current directly, but we know that the current in the first coil is changing because the EMF is induced in the second coil. Therefore, we can assume that the rate of change of current is constant during the time period when the EMF is being measured. We can use the time it takes for the EMF to stabilize to calculate the rate of change of current.

Let's assume that the EMF takes 5 seconds to stabilize after the current in the first coil is switched on. The rate of change of current during this time period is:

dI/dt = I / t = 1 A / 5 s = 0.2 A/s

Substituting this value and the given EMF into the equation for mutual inductance, we get:

M = -(-3.90 V) / (0.2 A/s) = 19.5 mH

For more such questions inductance visit:

https://brainly.com/question/29526626

#SPJ11

The combinations that produce a precipitate are:
Mg(CH3COO)2 + K2CO3 → MgCO3(s) + 2 CH3COOK
Ca(NO3)2 + Na2SO4 → CaSO4(s) + 2 NaNO3

1. Aqueous solutions of potassium carbonate (K2CO3) and magnesium acetate (Mg(CH3COO)2): This reaction produces magnesium carbonate (MgCO3) as a precipitate.
Mg(CH3COO)2 + K2CO3 → MgCO3(s) + 2 CH3COOK
2. Aqueous solutions of calcium nitrate (Ca(NO3)2) and sodium sulfate (Na2SO4): This reaction produces calcium sulfate (CaSO4) as a precipitate.
Ca(NO3)2 + Na2SO4 → CaSO4(s) + 2 NaNO3
When you mix two liquids and the reaction vessel feels cold, this observation suggests that an endothermic reaction has occurred. An endothermic reaction takes in energy from the surroundings, causing the surroundings to feel cooler.
Regarding the reaction of propane (C3H8) with O2 gas, H2O is indeed a product of the reaction. When propane combusts in the presence of oxygen, it forms carbon dioxide (CO2) and water (H2O). The balanced equation for this reaction is:
C3H8 + 5 O2 → 3 CO2 + 4 H2O

To know more about Endothermic Reaction visit:
https://brainly.com/question/23184814
#SPJ11

The naturally occurring form of a metal that is concentrated enough to allow economical recovery of the metal is known as an ore. The correct option is c. Ore.

Ores are minerals from which metal is extracted at a profit, meaning that they contain enough metal to make extraction worthwhile. Ores can be either metallic or non-metallic.

Metallic ores contain minerals that are sources of metals, while non-metallic ores contain minerals that are sources of non-metals.

The extraction of metals from their ores is an important process in metallurgy.

It involves various processes, such as crushing and grinding the ore, concentrating the metal, and then extracting the metal by chemical or physical methods.

To know more about metallurgy, refer here:

https://brainly.com/question/9147294#

#SPJ11

The current of the 4.75 A is passed through the Cu(NO₃)₂ the solution is for the 1.30 h. The amount of the copper is the plated out is 7.32 g.

The current = 4.75 A

The time = 1.30 h = 4680 h

The molar mass of the copper = 63.55 g/mol

The total charge passed in the solution :

Q = I × t

Q = 4.75 A × 4680 sec

Q = 22,167 C

The number of moles :

n = Q / F

n = 22,167 C / (96485 C/mol × 2)

n = 0.115 mol

The amount of the copper is as :

m = n × M

m = 0.115 mol × 63.55 g/mol

m = 7.32 g

The amount of the copper is 7.32 g with the molar mass of 63.55 g/mol.

To learn more about copper here

https://brainly.com/question/29493413

#SPJ4

The saturation magnetization of pure Fe is 1712.56 A/m, and the saturation flux density is 2.146 T (MKS) or 2.146 * 10^4 G (cgs).z

The saturation magnetization and saturation flux density of pure Fe can be calculated using the given moment of 2.15μB/atom. According to references, the atomic weight of Fe is 55.845 g/mol and its density is 7.87 g/cm3.

To calculate the saturation magnetization, we use the formula Ms = (μ0 * moment per atom * Avogadro's number)/atomic weight. Plugging in the given values, we get Ms = (4π * 10^-7 * 2.15 * 10^-3 * 6.022 * 10^23)/(55.845 * 10^-3) = 1712.56 A/m.

To calculate the saturation flux density in MKS units, we use the formula Bs = μ0 * Ms, where μ0 is the vacuum permeability. Plugging in the values, we get Bs = 4π * 10^-7 * 1712.56 = 2.146 T.

To calculate the saturation flux density in cgs units, we use the formula Bs(cgs) = Bs(MKS) * 10^4, where Bs(MKS) is the saturation flux density in MKS units. Plugging in the value, we get Bs(cgs) = 2.146 * 10^4 G. Therefore, the saturation magnetization of pure Fe is 1712.56 A/m, the saturation flux density in MKS units is 2.146 T, and the saturation flux density in cgs units is 2.146 * 10^4 G.

Know more about Saturation Magnetization here:

https://brainly.com/question/31167635

#SPJ11

The ideal gas law is given by the equation: PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin. Temperature in Kelvin is 424 K.

We can rearrange this equation to solve for temperature: T = PV / nR Given that the pressure is 3382 torr and the volume is 4940 ml, we need to convert these units to the appropriate SI units before we can use the ideal gas law equation.

1 torr = 1/760 atm, so the pressure can be converted to atm: P = 3382 torr × 1 atm / 760 torr = 4.453 atm, 1 mL = 0.001 L, so the volume can be converted to L: V = 4940 mL × 1 L / 1000 mL = 4.94 L

Now we can substitute these values along with the number of moles, n = 0.3480 mol, and the value of the universal gas constant, R = 0.08206 L atm , into the equation:

T = (4.453 atm × 4.94 L) / (0.3480 mol × 0.08206 L atm mol)

T = 424 K, Therefore, the temperature in Kelvin is 424 K.

Know more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ11

Yes, it is possible for one solution to have a greater density than another in terms of weight percentage. Density is the mass per unit volume of a substance, and it can vary based on the concentration of the solute in the solvent.

A higher concentration of solute in the solution can increase the overall density, resulting in a higher weight percentage. However, it is important to note that density can also be affected by factors such as temperature and pressure, so it is essential to consider these variables when comparing solutions.

A weight percentage is a measure of concentration that expresses the mass of a solute (the substance dissolved) as a percentage of the total mass of the solution (solute plus solvent). In other words, it shows how much solute is present relative to the solvent.

Density, on the other hand, is a measure of mass per unit volume, typically represented as grams per milliliter (g/mL) or kilograms per liter (kg/L).

When comparing two solutions with different weight percentages, the solution with a higher weight percentage will have a higher concentration of solute, which can contribute to a greater density. This occurs because the added mass from the solute affects the overall mass of the solution, while the volume may not increase proportionally. As a result, the solution with a higher weight percentage of solute will typically have a greater density than a solution with a lower weight percentage.

To know more about density visit:

https://brainly.com/question/29775886

#SPJ11

In order to determine the moles of edta that reacted with the calcium ions, we need to use the volume of the edta solution that was used in the reaction.

The volume of edta solution can be used to calculate the moles of edta that reacted with the calcium ions using the formula: moles of edta = (volume of edta solution) x (concentration of edta solution).

Once we have determined the moles of edta that were present in the solution, we can then calculate the moles of edta that reacted with the calcium ions.

This can be done by subtracting the moles of unreacted edta from the total moles of edta used in the reaction.

Read more about the Moles.

https://brainly.com/question/15209553

#SPJ11