Here, we have to draw the main organic products of a given bimolecular substitution reaction and the curved arrow mechanism of the reaction.
(Answer is attached in the picture)
Substitution reactions involve the replacement of one functional group in a molecule by another functional group. Nucleophilic substitution reactions involve a nucleophilic reagent with a substrate that has a positively or partially positively charged portion of the molecule (electrophile).
An electrophile is an atom or molecule that lacks electrons. In organic reactions, electrophiles act as electron acceptors (Lewis's acids). These reagents can be cations or neutral molecules that have relatively positively charged atoms.
Meanwhile, a nucleophile is an atom or molecule that is rich in electrons. The nucleophile has an electron pair that can be donated (a Lewis base). Some nucleophiles are neutral molecules that have a PEB and some are negatively charged. In a chemical reaction, electrons from the nucleophile strike the electrophile center to form new bonds as a result of the reaction.
On the question:
Use of curved arrows to indicate: A broken or formed bond.
Electron layer protective layer arrow
In the reaction of this problem, I replaced Br (Substitution) and Br bonded with Na⁺.
The nucleophile "replaces" the leaving group.
Called a substitution reaction: I replace Br (change places).
Learn more about substitution reactions at https://brainly.com/question/10143438.
#SPJ4
What is the lewis structure of I3^(-)?
The triiodide ion, with its I3- Lewis structure, is a linear anion ion with sp3d hybridization, trigonal bipyramidal geometry, and the acquisition of a linear form.
What makes up an ion?An ion is an atom or group of atoms with just an electric charge. The word for positive-charged ions is cations. Ions which have a negative surface charge are referred to as anion. The body includes ions of several common substances.
Which definition best fits an ion?A charged molecule or atom is known as an ion. Because there are more electrons than protons in an atom or molecule, it is charged. Depending upon whether the amount of an atom's electrons is more or less than the number or protons in the atom, an atom can develop a positive charged or a negative charge.
To know more about ion visit:
https://brainly.com/question/14982375
#SPJ4
What do covalent bond and organic compound have in common?
Answer:
Covalent bonds are much more common in organic chemistry than ionic bonds. A covalent bond consists of the simultaneous attraction of two nuclei for one or more pairs of electrons. The electrons located between the two nuclei are bonding electrons.
Explanation:
Atom Valence
Oxygen 2
Sulfur 2
Nitrogen 3
Carbon 4
Which gas is a molecule with 14 protons?
Nitrogen (N2) is a molecule that has 14 protons.
Nitrogen is a colorless, odorless, and tasteless gas that makes up about 78% of the Earth's atmosphere. Nitrogen is an important component of many compounds, including proteins, DNA, and RNA, and is essential for life on Earth.
Nitrogen gas is also used in a variety of industrial applications, including the production of fertilizers, explosives, and the preservation of food. Nitrogen is a non-metallic, diatomic gas that exists in two stable isotopes, 14N and 15N.
Nitrogen gas is relatively unreactive, due to the strong triple bond between the two nitrogen atoms in a nitrogen molecule (N2). However, under certain conditions, such as high temperatures or the presence of catalysts, nitrogen can react with other elements to form compounds such as ammonia (NH3), nitric oxide (NO), and nitrous oxide (N2O).
In the Earth's atmosphere, nitrogen plays a key role in the nitrogen cycle, a process by which nitrogen is converted between different chemical forms. Nitrogen gas is converted to ammonia by nitrogen-fixing bacteria, and then to nitrite and nitrate by microorganisms in the soil.
Overall, Nitrogen is a very important element in our planet and many industrial processes.
To know more about Nitrogen:
https://brainly.com/question/1380063
#SPJ4
2 Al + 3CuCl₂ --> 2 AlCl3 + 3 Cu
How many grams of Al do you need to make 15 g of AICI3? Remember
to round all molar masses to whole numbers.
(round to the hundredths place)
Molar mass: According to the answer you need 3.0 g of Al to make 15 g of AlCl3.
What is Molar mass?Molar mass is the mass of a given substance (chemical element or compound) divided by the amount of substance in moles. It is usually expressed in grams per mole (g/mol). Molar mass is an important concept in chemistry, as it is used to calculate the mass of a substance from the amount of moles of the substance. It is also used to calculate the amount of moles of a substance from the mass of the substance. Molar mass is also used to calculate the density of a substance, as well as the molar volume of a substance.
Molar mass of Al = 27 g/mol
Molar mass of AlCl3 = 133 g/mol
To make 15 g of AlCl3, you need 15/133 = 0.112 mol of AlCl3.
To make 0.112 mol of AlCl3, you need 0.112 mol of Al.
Therefore, you need 0.112 mol of Al x 27 g/mol = 3.0 g of Al.
Therefore, you need 3.0 g of Al to make 15 g of AlCl3.
To learn more about Molar mass
https://brainly.com/question/21334167
#SPJ1
The is all
the wavelengths of electromagnetic radiation.
• Radio waves
• Microwaves
• Infrared radiation
• Visible light
• Ultraviolet light
• X-rays
• Gamma rays
Electromagnetic radiation can be categorized into seven different groups. It consists of radio waves, microwaves, infrared, visible light, ultraviolet light, X-rays, and gamma rays.
The wavelengths of each of them are as follows:
Gamma rays: < 10⁻¹² m. It is usually used in the medical field
X-rays: 1 nm- 1 pm. It is used in a number of fields like medicine and airport security.
Ultraviolet: 400 nm- 1 nm. Sun is the main source of UV rays
Visible light: 750 nm- 400 nm. This is visible to our eyes.
Infrared light: 25 μm – 2.5 μm. It is mainly used in night vision goggles.
Microwaves: 1 mm – 25 μm. It is used in microwave ovens and other cooking utensils.
Radio waves: > 1 mm. It captures the waves transmitted by radio stations
Learn more about electromagnetism at:
https://brainly.com/question/17057080?referrer=searchResults
What balanced chemical reactions does carbon engineering involve?
What are some examples of balanced chemical reactions that involves carbon engineering?
The carbon engineering technologies forward the carbon dioxide capturing methods. The first step involved in the air contactor is given below:
[tex]\rm CO_{2} + 2 KOH \rightarrow H_{2}O + K_{2}CO_{3}[/tex]
What is carbon engineering ?Nowadays evolution of greenhouse gases such as carbon dioxide is causing serious issues such as global warming. Industries and factories are uncontrollably release these gases to the atmosphere.
Carbon engineering designs the techniques for direct capture of carbon dioxide. The methods include an air contactor with the reaction given above and a pelletizer where, the KOH and calcium carbonate produces calcium hydroxide.
A calcinator decomposes the calcium carbonate forming the carbon dioxide which is captures.
[tex]\rm CaCO_{3} \rightarrow CO_{2} + CaO[/tex]
Find more on carbon engineering:
https://brainly.com/question/30155036
#SPJ1
The following model was used to show a molecule of methane, or CH4. Describe the number and type of each component of the molecule.
There is only a single carbon atom and four hydrogen atoms in the model.
What is a model?In science, when we talk about a model, we know that what we mean is a representation. It is actually something that stands in for another. We can be able to use a model as a guide that enables us to be able to visualize what the actual molecule would look like.
We can see that in the compound that has been laid out here, we would have about four atoms that are from hydrogen while we would only have one atom from carbon in the compound.
Thus, the blue ball stands for carbon while each of the red balls stand for hydrogen atoms in the model shown.
Learn more about molecular models:https://brainly.com/question/156574
#SPJ1
how much heat is needed to raise the temperature of 100 g of water from 10°C to 20°C
Answer:
Ainsi pour transformer, sous la pression atmosphérique, une masse de 1 kg d'eau pris à 20 °C en vapeur, l'énergie à fournir est égale à l'énergie fournie pour passer de 20 °C à 100 °C à l'état liquide soit 334 kJ puis à celle requise lors de la vaporisation à 100 °C soit 2256 kJ donc au total 2590 kJ.
Explanation:
how many moles of sodium acetate must be added to 500ml of 0.25M acetic acid solution to produce a buffer with a pH of 4.94? the pKa of acetic acid is 4.74.
To make the buffer solution, 0.198 moles of sodium acetate are required (from which the conjugate base will be formed). The correct response is (C) 0.198 moles.
What in chemistry is a mole?A highly important unit of measurement used by chemists is the mole. A mole of anything means you have 602,214,076,000,000,000,000,000 of that thing, just like a dozen eggs equals twelve eggs. Chemists use moles to measure incredibly small substances like atoms, molecules, and other particles.
How can I figure out moles?How many moles of a chemical are there? The substance's weight should be determined. See a periodic table to find its atomic or molecular mass. Subtract the weight from the mass of the atoms or molecules.
To know more about moles visit:
https://brainly.com/question/26416088
#SPJ1
Complete the table below by writing the symbols: ionic compound cation anion NaCl Na^+ Cl^- CrCl4 Cr^4+ Cl^- NH,Br NΗ4^+ Br^- Cu(OH)2 Cu^2+ OH^- Cos
Ionic compound Cation Anion
NaCl Na^+ Cl^-
CrCl4 Cr^3+ Cl^-
NH4Br NH4^+ Br^-
Cu(OH)2 Cu^2+ OH^-
CoS Co^2+ S^2-
Please note that in CrCl4 the cation is Cr^3+ not Cr^4+
In the table above, the first compound is NaCl. The sodium cation has a positive charge of +1 and the chloride anion has a negative charge of -1, which gives the compound a neutral charge.
The second compound is CrCl4. The Chromium cation has a positive charge of +3 and the chloride anion has a negative charge of -1, which gives the compound a neutral charge as well.
The third compound is NH4Br. The ammonium cation has a positive charge of +1 and the bromide anion has a negative charge of -1, which gives the compound a neutral charge.
The fourth compound is Cu(OH)2. The Copper cation has a positive charge of +2 and the hydroxide anion has a negative charge of -1, which gives the compound a neutral charge.
Finally, the fifth compound is CoS. The Cobalt cation has a positive charge of +2 and the sulfide anion has a negative charge of -2, which gives the compound a neutral charge.
It's important to note that the charge of the cations and anions must match for the compound to be neutral, if not the compound will have a net charge.
To know more about cations and anions:
https://brainly.com/question/28971609
#SPJ4
Please answer BOTH questions! Many thanks.
The Born -Haber cycle is used to find out the lattice energy and formation enthalpy of a reaction from its individual steps. The total energy of the cycle is zero.
What is Hess law ?According to Hess law, we can split a reaction into several steps. each steps involves the phase transitions, ionization of constituent elements.
The energy required form a solid compound from its constituent elements in gaseous state is called the lattice energy of the compound. Here the formation of KBr from gaseous K and Br is given. Thus the enthalpy change is called lattice energy.
The lattice energy plus the formation energy is called the total energy in the reaction. Where, the enthalpy change of the cycle is zero. The Born -Haber cycle of the given reaction include first reaction with the phase transition of each elements and their ionization.
The ionized atoms combine together to form the product, which is written as the overall reaction in the top.
Find more on Hess law:
https://brainly.com/question/14561923
#SPJ1
A gas at a pressure of 1 atm is in a
sealed 1.0 L container. What happens
to the pressure when the
temperature is reduced to half of the
original amount?
The pressure of a gas is directly proportional to its temperature. Hence, as temperature decreases pressure decreases. Therefore, option D is correct.
What is Gay- Lussacs law?
According to Gay- Lussacs law at constant volume, the pressure of a gas is directly proportional to the temperature.
Hence, P/T = constant.
Let P1 and T1 be the initial pressure and temperature and P2, T2 be the final quantities, then
P1/T1 = P2/T2
Given P1 = 1 atm
T1 = x ° C
T2 = x/2° C
Then P2 = P1 T2/T1
P2 = 1 × x/2° C / x° C
= 1/2 atm
That is one half of the initial pressure.
Therefore, the pressure of the gas reduces to half when temperature is reduced to half. Thus, option D is correct.
Find more on Gay- Lussacs law:
http://brainly.com/question/2683502
#SPJ1
You have 1.00 mol/L solution of sulfuric acid. Describe how you would use this solution to make 250.0mL of a 0.500 mol/L solution of sulfuric acid.
*Hint: Your answer should include more than just a calculation.
To make 250.0 mL of something like a 0.500 mol/L sulfuric acid solution, 0.125 L of a 1.00 mol/L sulfuric acid solution is needed.
What occurs when sulfuric acid is touched?can cause blindness and irritate & irritate the skin and the eyes. Exposures may result in pulmonary edema, a genuine condition when fluid builds up in the lungs. Headache, nauseousness, and vomiting can all result after exposure.
What is the primary use of sulfuric acid?Another important ingredient in the chemical process industries is sulfuric acid. It is most frequently employed in the production of fertilizer, but it is also crucial for the processing of minerals, oil, wastewater, and chemicals. H2S04, often known as sulfuric acid, is a corrosive chemical that harms your skin, eyes, teeth, & lungs. Extreme exposure can be fatal.
n1 = n2
CM = n / V
n = CM x V
CM1 x V1 = CM2 x V2
1.00 x V1 = 0.500 x 0.2500
V1 = (0.500 x 0.2500) / 1.00
V1 = 0.125 L
To know more about sulfuric acid visit:
https://brainly.com/question/30039513
#SPJ1
Please help
Solid sodium reacts with fluorine gas.
The theoretical yield of the reaction is calculated as 28.2 g NaF.
25.9 g NaF were recovered after the reaction.
What is the percent yield of for the reaction?
2Na + F2 → 2NaF [ ? ]%
Considering the definition of percent yield, the percent yield for the reaction is 91.84%.
Definition of percent yieldThe percent yield is the ratio between the actual yield and the theoretical yield expressed as a percentage.
The percent yield is calculated as:
percent yield= (actual yield÷ percent yield)×100%
where:
The actual yield is the amount of product obtained from a chemical reaction.The theoretical yield is the amount of product that is obtained from the stoichiometric equation using the limiting reagent to determine the product.Percent yield in this case.In this case, you know:
Actual yield= 25.9 gTheoretical yield= 28.2 gReplacing in the definition of percent yield:
percent yield= (25.9 g÷ 28.2 g)×100%
Solving:
percent yield= 91.84%
Finally, the percent yield is 91.84%.
Learn more about percent yield:
brainly.com/question/14408642
#SPJ1
im crying guys I dont understand
The following data was collected when a reaction was performed experimentally in the laboratory.
Reaction Data
Reactants Products
Fe2O3 Al Al2O3 Fe
Starting Amount in Reaction 3 moles 5 moles ? ?
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
The experiment will only result in a maximum of 280 grams of iron (Fe) being produced.
Iron is what?The mineral iron is essential to our bodies for a number of processes. As an illustration, iron is a constituent of hemoglobin, a chemical that transports oxygen from our lungs to each and every tissue in our bodies. It helps our muscles get oxygen and store it. Iron is also present in many other enzymes and enzymes. Your body needs iron in the right amount.
How does the body use iron?Another form of protein called hemoglobin, which is present throughout red plasma cells and carries the oxygen from your lungs to every of the body, contains a sizable quantity of iron. If the body doesn't have enough iron, it won't produce enough red blood cells to deliver oxygen, which leads to fatigue.
equation of the reaction:
Fe₂ O₃ + 2Al --> 2Fe + Al₂ O₃
mole ratio of Fe₂ O₃ to Al = 1:2
5 moles Fe = 5 x 56
= 280 grams
To know more about iron visit:
https://brainly.com/question/24645617
#SPJ1
How many grams are in 12 atoms of carbon?
12 atoms of carbon is equal to 12 x 12.011 grams, or 144.132 grams.
The atomic mass of carbon is 12.011 g/mol, which means that one mole of carbon contains 12.011 grams. Therefore, to find the mass of 12 atoms of carbon, we need to multiply 12.011 by 12, which equals to 144.132 grams.
This is because 1 mole of any element is equal to 6.022 x 1023 atoms. To calculate the mass of 12 atoms, we need to divide 12 by 6.022 x 1023, which is equal to 1.99 x 10-23 moles.
Once we have this number, we can multiply it by 12.011 to get the mass of 12 atoms of carbon. This gives us the final answer of 144.132 grams for 12 atoms of carbon.
For more questions like Carbon click the link below:
https://brainly.com/question/28685805
#SPJ4
What is the percent composition of carbon in sucrose?
What is the percent composition of hydrogen in sucrose?
What is the percent composition of oxygen in sucrose?
Sucrose = C12H22O11, Molar Mass = 12.01(12)+1.01(22)+16.00(11) = 342.34 g/mol
Answer:
Percentage Composition from Formulas. A more complex example is sucrose (table sugar), which is 42.11% carbon, 6.48% hydrogen, and 51.41% oxygen by mass.
Explanation:
A set of chemistry exam scores are normally distributed with a mean of 707070 points and a standard deviation of 555 points. What proportion of exam scores are between 686868 and 737373 points? you may round your answer to four decimal places.
The proportion of exams scores between 68 and 73 points is 38.09%.
First, we need to calculate the z-score of both points.
Formula for z-score is:
z-score = (x – mean) / SD
In this case, given that:
Mean = 70
SD = 5
So, for exam score 68 points:
z-score = (68 – 70) / 5
= –2 / 5
= –0.4
And, for exam score 73 points:
z-score = (73 – 70) / 5
= 3 / 5
= 0.6
Thus, the probability:
P (68 < x < 73) = P (–0.4 < z < 0.6)
By using the z-table:
P (–0.4 < z < 0.6)
= (0.5 – 0.3446) + (0.7258 – 0.5)
= 0.3809
= 38.09%
Hence, the proportion of exams scores between 68 and 73 points is 38.09%.
Learn more about z-score at: https://brainly.com/question/15016913
#SPJ4
Model 1 - Chemical Reactions
CL + 2NaBr
2(g)
(aq)
2NaCl + Br
(aq)
1. Label the reactants and the products.
2. What does the number 2 in Cl, mean?
2
Click to add text
3. What does the 2 in front of 2NaBr mean?
Click to add text
Reactant
2(1)
Product
1. 1st reaction:reactant, 2nd reaction:product.
2. 2 in cl2 means that chlorine is diatonic
3. 2 in front of NaBr shows that there are 2 moles of NaBr
7. The relative atomic mass of lithium is 6.94 and its atomic number is 3. Which one
statement below can be correctly deduced from this information?
A) All ions of lithium contain three electrons.
B) All atoms of lithium contain equal numbers of electrons and neutrons.
C) Some atoms of lithium contain more than three electrons.
D) All atoms of lithium contain three protons.
Lithium is an alkali metal with the atomic number = 3 and an atomic mass of 6.941 g/mol. All ions of lithium contain three electrons.
What Is lithium the drug used for?Lithium is a type of medicine known as a mood stabiliser. It's used to treat mood disorders such as: mania (feeling highly excited, overactive or distracted) hypo-mania (similar to mania, but less severe)
What lithium does to the brain?At a neuronal level, lithium reduces excitatory (dopamine and glutamate) but increases inhibitory (GABA) neurotransmission; however, these broad effects are underpinned by complex neurotransmitter systems that strive to achieve homeostasis by way of compensatory changes.
To know more about lithium visit
https://brainly.com/question/1439744
#SPJ1
What does a metal combine with in an
ionic compound?
4. If 13.34 g of an unknown substance has a -40.8 J of heat in cooling from 50°C to 43°C,
what is the specific heat of the unknown?
Answer: c (specific heat capacity) = 0.4369243949 J/g *C
Or with Significant digits: 0.44 ( 2 sig digs because of temperature)
Explanation: So this is a simple calorimetry question, so you have to consider this formula, ΔH = -Q and since Q = mcΔt || Therefore you get this equation ΔH = - (mcΔt). So you want to solve for c, now rearrange. Once you do that, you will end up with c = - (ΔH/ -m · -Δt)
Now Plug in the numbers
Then you will get 0.44!
Hope that helped and remember significant digits! Good luck!
Help me with this chemistry question please and thank you
Yes it is True.
Because Zinc(Zn) is Highly reactive than Hydrogen(H) that is why Zn can easily replace Hydrogen in HCl and form ZnCl2.
Consider the following intermediate chemical equations.
3 equations. 1: upper C solid plus upper o subscript 2 gas right arrow upper C upper O subscript 2 gas Delta H 1 equals negative 393.5 kilojoules. 2: 2 upper C upper O gas plus upper O subscript 2 gas right arrow 2 upper C upper O subscript 2 gas Delta H 2 equals negative 566.0 kilojoules. 3: 2 upper H subscript 2 upper o gas right arrow 2 upper H subscript 2 gas plus upper O subscript 2 gas delta H 3 equals 483.6 kilojoules.
The overall chemical equation is Upper C (s) plus upper H subscript 2 upper O (g) right arrow upper C upper o (g) plus upper H subscript 2 (g).. To calculate the final enthalpy of the overall chemical equation, which step must occur?
Reverse the first equation, and change the sign of the enthalpy. Then, add.
Reverse the second equation, and change the sign of the enthalpy. Then, add.
Multiply the first equation by three, and triple the enthalpy. Then, add.
Divide the third equation by two, and double the enthalpy. Then, add.
Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 485.9 kJ is the overall enthalpy of the reaction.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Reverse the first equation: upper C solid plus upper o subscript 2 gas right arrow upper C upper O subscript 2 gas ΔH1=-393.5 kJ
Reverse the second equation:2 upper C upper O gas plus upper O subscript 2 gas right arrow 2 upper C upper O subscript 2 gas ΔH2=-566.0KJ
Reverse the third equation: 2 upper H subscript 2 upper o gas right arrow 2 upper H subscript 2 gas plus upper O subscript 2 gas ΔH2=-483.6 kJ
ΔHrxn = 393.5 kJ + 566.0 kJ + (-483.6 kJ)
= 485.9 kJ
Therefore, 485.9 kJ is the overall enthalpy of the reaction.
To know more about enthalpy, here:
brainly.com/question/24170335
#SPJ1
If chemicals are transferred to secondary containers, the secondary containers must be labeled with the chemical's. True or False?
TRUE , Auxiliary containers must be labeled, excluding a few circumstances. LABEL IT IF If a secondary container was transportable, for instance, you are frequently exempt from label requirements.
What does an OSHA secondary container mean?Chemicals are typically transferred from primary container to secondary containers while within the workplace. These smaller containers can be spray bottles, containers, aliquots, or jars. OSHA states that secondary containers must adhere to the labeling specifications.
What is required for a secondary container?The identification of the product's hazardous substances and any physical, health-related, nor environmental risks that may be posed by its constituent parts are the two pieces of information that must be provided on the secondary labels.
To know more about secondary container visit:
https://brainly.com/question/2989619
#SPJ4
An organic synthesis to make the pain reliever acetominophen is supposed to produce 280 kg of product but instead produces 70 kg of waste in addition to the acetaminophen. what is the percent yield?
The theoretical yield in this instance is 280 kg, however the actual yield is only 70 kg. Consequently, the percent yield is calculated as follows: 25% = 70/280 x 100.
How do you find percent yield?We apply the following formula to determine the yield percentage: percent yield = actual yield/theoretical yield x 100.The percentage yield indicates how much product is produced in relation to the maximum mass that may be produced. The percentage of atoms in reactants that go on to generate the intended product is determined by the atom economy of a reaction.The efficiency of a chemical process is gauged by percentage yield. It provides us with information on the percentage of our reactants that effectively converted into a product.Percent yield is a metric that contrasts the amount of product we actually generate with the amount we predict we should produce. There will always be a small amount of product left over after a reaction in a genuine lab. How close we can come is indicated by percent yield.To learn more about yield refer to:
https://brainly.com/question/30242685
#SPJ4
Complete the electrophilic addition mechanism below.
Box1: Add the missing curved arrow notation.
Box 2: Add the missing curved arrow notation, lone pair electrons, and non-zero formal charges.
Box3: Draw the organic product with all applicable lone pair electrons and non-zero formal charges.
The electrophilic addition reaction is the reaction in which electrophile attack the substrate. The compound containing double or the triple bond broken into the sigma bond.
The electrophilic addition reaction in which the compound that contains the double or the triple bond , broken in to the sigma bond. The some of the example of the electrophilic reaction of the alkene is given below :
CH₂ = CH₂ + HX ----> CH₃ - CH₂X
CH₂ = CH - CH₃ + HX ----> CH₃ - CHX - CH₃
The proton H⁺ will make a bond with carbon atom of the carbon = carbon double bond. The halogen ion forms the bond with the intermediate carbocation produces the final product.
The question is incomplete, i gave general answer according to my knowledge.
To learn more about electrophilic addition here
https://brainly.com/question/20113871
#SPJ4
Give the hybridization for the O in OF 2.
a. sp(^3)d
b. sp(^3)d(^2)
c. sp^3
d. sp^2
e. sp
It is a useful ability to be able to rapidly assess whether the atom is the hybridization again for O in OF 2, as the hybridization hypothesis is sometimes perceived as a convoluted and lengthy notion. sp^2
What does hybridization look like in practice?The process chemical hybridization known as sp3 hybridization involves the mixing and recasting of the 1s and 3p electron shells of the same element to create new hybrid orbitals with the same energy, symmetric, and fixed orientation in space. The molecule of methane is one example.
How and why is hybridization important?Atomic orbitals are thought to combine to generate freshly hybridized orbitals through the process of hybridization, which then affects the geometry of molecules and their bonding characteristics. Additionally, hybridization expands the valence
To know more about hybridization visit:
https://brainly.com/question/14140731
#SPJ4
A chemical reaction has reached equilibrium when
a. the concentrations of reactants and products are equal,
b. the rate of the forward reaction equals the rate of the reverse reaction,
c. all reactants have been converted to products,
d. all products have been removed from the reaction mixture.
A chemical reaction has reached the equilibrium when b. the rate of the forward reaction equals the rate of the reverse reaction.
The chemical reaction is said to be in the equilibrium when the rate of the forward reaction is equals to the rate of the backward reaction. . The equilibrium is the state of the balance. The chemical equilibrium is the state of the reaction when the the rates of the forward and the rates of the backward reaction s are equal.
forward
A + B ⇄ C
backward
The chemical equilibrium are of the two types :
Homogeneous EquilibriumHeterogeneous EquilibriumTo learn more about equilibrium here
https://brainly.com/question/8432443
#SPJ4
Classify these orbital descriptions by type. Atomic orbital Hybrid orbital Molecular orbital p d f P sp^2 sp^3 sp^3d sigma2s pi2p S
The concept used to solve this problem is based on type of orbitals. The orbitals can be atomic, molecular and hybrid.
The atomic orbitals are the areas of space around the nucleus of an atom where an electron is expected to be found. The hybrid orbitals are the orbitals which are formed by mixing of atomic orbitals. The molecular orbitals are the orbitals which have bonding and antibonding orbitals.
Step: 1
The orbitals s, p, d and f are atomic orbitals. The electrons can be find in atomic orbitals. the electrons of an atom can be filled in s, p, d and f orbitals
Step: 2
The orbitals sp,sp2,sp3 and sp3d are hybrid orbitals. The hybrid orbital is formed by combination of atomic orbital.
Step: 3
The molecular orbitals are σ2s and π2p. The molecular orbitals are made up of bonding and antibonding orbitals.
To know more about orbitals here
https://brainly.com/question/14361631
#SPJ4