During the day, the earth is heated up by the sun. The land gets hotter than the sea because it takes less energy to increase the land's temperature than to increase the sea's temperature. The land heats the air near it. This air rises and is replaced by cool air from the ocean, creating a "sea" breeze that blows from the ocean to the land during the day. Which forms of heat transfer are described above as helping to create a sea breeze? A. convection only B. radiation only C. convection and conduction D. conduction and radiation

Answers

Answer 1

Answer:

C. convection and conduction

Explanation:

A sea breeze is a phenomenon that occurs during hot summer days when the sun transfers its heat to the earth surface by convection the land absorbs energy much easier than the seawater. As a result, the air above land will become warmer and as we know warmer air is lighter so this air will rise-up the air above the sea will now move from sea to the land to balance this air also there will be heat exchange between land air and the sea air by conduction and hence together they will create a phenomenon called a 'sea breeze'.


Related Questions

If an atom has 15 protons and how many electrons will be gained when this atom forms an ion?

Answers

Answer:

What are the Answer choices

medicine some chemical components (chemical formula)​

Answers

Answer:

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs.

Compounds used as medicines are most often organic compounds, which are often divided into the broad classes of small organic molecules (e.g., atorvastatin, fluticasone, clopidogrel) and "biologics" (infliximab, erythropoietin, insulin glargine), the latter of which are most often medicinal preparations of proteins

Explanation:

Jack has a rock.the rock has a mass of 14g and a volume of 2cm^3.what is the density of the rock?

1
SEE ANSWER

ADD ANSWER

Answers

Answer:

7

g

c

m

3

Explanation:

Ni(OH)3 +
Pb(SO4)2 →__Pb(OH)4 +
Ni2(SO4)3
what is the balance

Answers

Answer:

4+3=3+3+2

Explanation:

4Ni(oh)3+3pb(so4)2=3pb(oh)4+2Ni2(so4)3

Which of the following is an example of quantitative data?
A.five eggs in each nest
B.oval-shaped eggs
C.small eggs
D.blue eggs with white specks

Answers

Answer: a, five eggs in each nest
Explanation: quantitative means data that includes numbers

How quickly an object
accelerates is directly related
to the_____________
of the object
and the size of the___________
applied to it.

Answers

Answer:

How quickly an object  accelerates is directly related  to the Mass of the object  and the size of the Force applied to it.

Explanation:

Acceleration is directly proportional to force and inversely proportional to mass. This means that if you get pushed, the harder you are pushed, the faster you'll move (accelerate).

What is the relationship between force and acceleration?

Newton's second law shows that there is a direct relationship between force and acceleration. The greater the force that is applied to an object of a given mass, the more the object will accelerate. For example, doubling the force on the object doubles its acceleration.

What is the relationship between mass and acceleration?

The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object. As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.

4. Calculate the energy (E) and wavelength (1) of a photon of light with a frequency of
6.165 x 1014 Hz.
PLEASE HELP!!

Answers

Answer: E= 4.085 x 10^-19 J ; Wavelength= 4.862 x 10^-7 m

Explanation:

Sorry for the messy work, but I hope this helps.

Remember:

Plancks constant (h)=  6.626x10^-34 Js

Speed of light (c) = 2.998 x 10^8 ms^-1

What I did:

I found the energy first with the given frequency. Don't forget to convert your units to s^-1! They are actually the same, you dont need to do math for that conversion, just a simple Hz to s^-1.

For the wavelength, I multiplied plancks constant (h) and speed of light (c) together. With that number I divided by the energy found which 4.085 x 10^-19J. Also, be sure to cross off the units because it can get very confusing.  

The energy of the photon is 4.08 x 10⁻¹J

The wavelength of the photon is 2.58 x 10⁻ m

The given parameters;

frequency of the photon, f = 6.165 x 10¹⁴ Hz

The energy of the photon is calculated as;

E = hf

where;

h is Planck's constant = 6.626 x 10⁻³⁴ Js

E = (6.626 x 10⁻³⁴)( 6.165 x 10¹⁴)

E = 4.08 x 10⁻¹⁹ J

The wavelength of the photon is calculated as;

v = fλ

where;

v is the speed of light = 3 x 10⁸ m/s

[tex]\lambda = \frac{v}{f} \\\\\lambda = \frac{3\times 10^8}{1.165\times 10^{14}} \\\\\lambda = 2.58 \times 10^{-6} \ m[/tex]

Learn more here: https://brainly.com/question/15946945

Which descriptions apply to prokaryotic cells? Check all that apply.

are usually single-celled

contain a nucleus

do not contain membrane-bound organelles

have DNA located in cytoplasm

Answers

Bacteria are prokaryotic. So I would say (prokaryotic cells are single-celled), because, Bacteria don’t have nucleus, prokaryotes in general don’t have nucleus. Prokaryotes contain cell membrane, bacteria cells contain plasmids which have DNA.

Answer:

-are usually single celled

-do not contain membrane-bound organelles

-have DNA located in cytoplasm

Explanation:

currently taking the test

Describe cycling or movement of water throughout earths spheres. Explain why the process is considered a cycle. Write a complete paragraph (five complete sentences minimum) in order to receive full credit for this activity

Answers

Answer:

This process is considered as a cycle because it continues and dosent stops. This process includes the evaporation of watet from earth surface due to heat.this water is converted in to water vapours. After reaching clouds it condences back. When the clouds become heavy with watef it falls back on earth as rain.and the process repeats.

Explanation:

The valence electrons are those found in the highest energy ____ and ___ orbitals


^Please help ASAP I’ll mark you as brainlister FILL in the blank

Answers

Highest energy level and S & P orbitals are found in valence electrons

The outmost free electron which is present in the outer shell is called valency. The number of elements joining together to form the compound also depends on the valency.

Each electron has revolved around the nucleus and that path is considered as orbit. The orbit is as follows:-

SPDF

The free electrons are usually lie in the outmost shell.

Hence according to the question, the correct option is S and P orbit.

For more information, refer to the link:-

https://brainly.com/question/12271256


1. What happens to the height of the skater over time?

Answers

Answer:

if their genes want to grow any more, they'll grow.

Explanation:

The higher the skater is the more potential energy he has. As his height decreases, his potential energy decreases and his kinetic energy increases.

Which is the control center for the endocrine system?
O the thymus
the hypothalamus
the pancreas
o the thyroid

Answer: the hypothalamus

Answers

Thank you for the answer, it is much appreciated, and if you haven't seen it already, it is B.

Answer:

The answer is B on edge

Explanation:

Students were given four unknown substances and asked to observe their
characteristics. Their observations are shown in the table below:



Which of the unknown substances is MOST likely a metal?

Answers

Answer:

b

Explanation:

How many moles contain 3.1 x 1022 molecules of H2O

Answers

Answer:

The answer is 0.051 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question

N = 3.1 × 10²² molecules of H2O

We have

[tex]n = \frac{3.1 \times {10}^{22} }{6.02 \times {10}^{23} } \\ = 0.05149501...[/tex]

We have the final answer as

0.051 moles

Hope this helps you

PLEASE HELP!

Why do atoms share electrons in covalent bonds?

A. to attain a noble-gas electron configuration

B. to become more polar

C. to become ions and attract each other

D. to increase their atomic numbers​

Answers

Answer:

Answer Option A) To attain a noble-gas electron configuration.

Explanation:

Correct answer from test

Taking into account the definition of covalent bond and octet rule, the correct answer is option A.  Atoms share electrons in covalent bonds to achieve a noble gas electron configuration.

The covalent bond is the chemical bond that occurs between atoms of non-metallic elements. These atoms have many electrons at their outermost level and have a tendency to share them to acquire the stability of the noble gas electronic structure. In this way a molecule is formed.

The tendency of the elements to reach a stable configuration is known as the octet rule. For this, the octet rule explains that there must be eight electrons in their last energy levels, thus acquiring the structure of a noble gas.

So, a covalent bond is a force that joins two atoms of non-metallic elements to form a molecule in order to comply with the octet rule.

Finally, the correct answer is option A.  Atoms share electrons in covalent bonds to achieve a noble gas electron configuration.

Learn more:

https://brainly.com/question/14149997?referrer=searchResultshttps://brainly.com/question/12694836?referrer=searchResultshttps://brainly.com/question/2959530?referrer=searchResults

Does the use of lithium cause human health problems?

Answers

Answer:

Yes

Explanation:

Lithium can cause nausea, diarrhea, dizziness, change in heart rhythm, muscle weakness, fatigue, and a dazed feeling

Continued use of Lithium could mean fine tremor, frequent urination, and thirst

Source: Webmd.com

Count the total number of atoms in CH4:

Answers

Answer:

5 atoms

Explanation:

there is 1 carbon atom and 4 hydrogen atoms

In which region is the substance in both the solid phase and the liquid phase?
1 2 3 4

Answers

Answer:

its 2 on ed I promise do not listen to the brainiest

Explanation:

Answer:

B)2

Explanation:

Please Answer. What is the density of an object that has a mass of 13g and a volume of 25 cm3?

Answers

Density = Mass/Volume
13/25=0.52g/cm3

Answer:

The density of object is 0.52 g/cm³

Explanation:

Given data:

Density of object = ?

Mass of object = 13 g

Volume of object = 25 cm³

Solution:

Formula:

d = m/v

d = 13 g/ 25 cm³

d = 0.52 g/cm³

Thus, the density of object is 0.52 g/cm³.

Molecules in a liquid are:
closer together than in a gas
moving more quickly than in a solid
moving more slowly than in a gas
all of the above
Please help!!!

Answers

Answer:

all of the above

Explanation:

Answer
All of the above
Explanation:

Planets A and B are both the same size, but planet B has three times the mass of planet A. How does the weight of an object compare on the two planets?

Choose the correct answer.


The weight of an object is the same on both planets.

The weight of an object is three times larger on planet A.

The weight of an object is three times larger on planet B.

The weight of an object will depend on more factors than just the weight and size of the planet.

Answers

Answer:

The answer is d

Explanation:

Help pleaI’ll give brainliest

Which element has the
greatest number of valence electrons available for bonding?
O selenium
Oboron
O calcium
O chlorine

Answers

The element Chlorine has the greatest number of valence electrons for bonding. This is because selenium has 6 valence electrons, boron has 3 valence electrons, calcium has 2 valence electrons, and chlorine has 7 valence electrons. Therefore we can see that since 7 is the greatest number chlorine has the greatest number of valence electrons.

Reggie suddenly decided to drive to the Grand Canyon, because he had never seen it. He didn't even have a map showing him how to get there! Reggie made a(n) _____. a. routine decision b. impulse decision c. daily decision d. regular decision Please select the best answer from the choices provided A B C D

Answers

Answer:

b. impulse decision

Explanation:

In this scenario, Reggie suddenly decided to drive to the Grand Canyon, because he had never seen it. He didn't even have a map showing him how to get there! Reggie made an impulse decision.

An impulse decision can be defined as a type of decision an individual makes without having a clear thought about the decision. Thus, an impulsive decision is strictly based on an individual's inclination, instinct, whim or sudden desire to do something.

This ultimately implies that, decisions that are made spontaneously without due diligence and considerations refer to an impulse decision.

Hence, Reginald's decision is an impulse decision because he suddenly decided to drive to go see a place (Grand Canyon) he hasn't seen before, even though he had no map to use as a guide or direction.

Answer:    b

Explanation:

ionic compound of potassium fluoride.​

Answers

Answer:

Yes

Explanation:

Im not sure about the question but potassium fluoride, KF is an ionic compound.

How does oxygen get into the cell in order for cellular respiration to occur?
A.Diffusion
B.Exocytosis
C.Osmosis
D.Endocytosis

Answers

Answer:

A. Diffusion

Explanation:

A.Diffusion  - this is correct. Diffusion is the process where small molecules enter the cell by moving from a high concentration to a low concentration through a semi-permeable membrane.

B.Exocytosis  - this is incorrect. Exocytosis is a cell transport mechanism where the cell uses a system of vesicles to transport cargo outside of the cell. The vesicles fuse to the cell membrane and deliver the cargo outside.

C.Osmosis  - this is incorrect, osmosis is a type of diffusion specific to water molecules

D.Endocytosis - this is incorrect. Endoocytosis is a cell transport mechanism where the cell uses a system of vesicles to transport cargo into the cell. The cell membrane engulfs the molecules and brings them into the cell via the vesicle

what are these significant figs A) 0.0040 B)1,000,000 C) 1.20 X 10^3

Answers

C is the answer I believe of the figs significant

Which animal would you want to swim with the most, Dolphin or A White Whale?

Answers

Answer:

White whale

Explanation:

Just because I never seen a white whale:)

NEED HELP ASAP WITH THESE QUESTIONS GIVING FAIR AMOUNT OF POINTS IF HELPED WITH ALL QUESTIONS Violet light has a wavelength of 4.20 x 10-12 m. What is the frequency?






3. A photon has a frequency (n) of 3.468 x 106 Hz. Calculate its energy






Calculate the energy (E) and wavelength (l) of a photon of light with a frequency of 4.215 x 1014 Hz.







Calculate the frequency and the energy of blue light that has a wavelength of 400 nm
(h = 6.62 x 10-34 J-s).









Calculate the wavelength and energy of light that has a frequency of 9.5 x 1015 Hz.






A photon of light has a wavelength of 0.090 cm. Calculate its energy.






Calculate the energy and frequency of red light having a wavelength of 2.80 x 10-5 cm.






Calculate the energy (E) and wavelength (l) of a photon of light with a frequency of 5.165 x 1014 Hz.







The wavelength of green light from a traffic signal is centered at 7.20 x 10-5 cm. Calculate the frequency.








If it takes 1.56 seconds for radio waves (which travel at the speed of light) to reach the moon from Earth, how far away is the moon?






Calculate the frequency of light that has a wavelength of 4.20 x 10-9m. Identify the type of electromagnetic radiation.

Answers

Answer:

a) 7.14e19 Hz

b) 2.298e-27 J

c) 2.793e-19 J; 7.117e9 nm

d) 7.5e14 Hz; 4.96e-19 J

e) 6.2947e-18 J; 31.6 nm

f) 2.21e-22 J

g) 7.1e-19 J; 1.1e15 Hz

h) 3.422e-19 J; 581 nm

i) 4.2e14 Hz

j) 1.92e8 m

k) 7.14e16 Hz; Ultraviolet

Explanation:

Frequency: ν       Wavelength: λ       Energy: E       Speed of light: C (3.00e8)       Planck's Constant: h (6.626e-34)

ν -> λ    λ = C/ν

λ -> ν    ν = C/λ

For either of these equations, wavelength must be converted to meters or nanometers, depending on the equation.

For ν -> λ, after doing the equation, convert the wavelength into nanometers by dividing by 1e-9.

For converting λ -> ν, convert the wavelength into meters by multiplying by 1e-9.

For energy: E = hν = hc/λ

Now that the setup is out of the way:

a) Violet light has a wavelength of 4.20 x 10-12 m. What is the frequency?

λ -> ν    ν = C/λ

[tex]\frac{3.00e8}{4.20e-12}[/tex] = 7.14e19 Hz

b) A photon has a frequency (n) of 3.468 x 106 Hz. Calculate its energy

E = hν = hc/λ

(6.626e-34) (3.468e6) = 2.298e-27 J

c) Calculate the energy (E) and wavelength (l) of a photon of light with a frequency of 4.215 x 1014 Hz.

E = hν = hc/λ

(6.626e-34) (4.215e14) = 2.793e-19 J

ν -> λ    λ = C/ν

[tex]\frac{3.00e8}{4.215e14}[/tex] = 7.117 m

[tex]\frac{7.117m}{1}*\frac{1nm}{1e-9m}[/tex] = 7.117e9 nm

d) Calculate the frequency and the energy of blue light that has a wavelength of 400 nm  (h = 6.62 x 10-34 J-s).

λ -> ν    ν = C/λ

[tex]\frac{400 nm}{1} *\frac{1e-9m}{1nm}[/tex] = 4e-7 m

[tex]\frac{3.00e8}{4e-7}[/tex] = 7.5e14 Hz

E = hν = hc/λ

(6.626e-34) (7.5e14) = 4.96e-19 J

e) Calculate the wavelength and energy of light that has a frequency of 9.5 x 1015 Hz.

ν -> λ    λ = C/ν

[tex]\frac{3.00e8}{9.5e15}[/tex] = 3.16e-8 m

[tex]\frac{3.16e-8m}{1}*\frac{1nm}{1e-9m}[/tex] = 31.6 nm

E = hν = hc/λ

(6.626e-34) (9.5e15) = 6.2947e-18 J

f) A photon of light has a wavelength of 0.090 cm. Calculate its energy.

E = hν = hc/λ

Convert the wavelength from cm to meters:

[tex]\frac{0.090cm}{1} *\frac{1m}{100cm}[/tex] = 9e-4 m

[tex]\frac{(6.626e-34)(3.00e8)}{9e-4}[/tex] = 2.21e-22 J

g) Calculate the energy and frequency of red light having a wavelength of 2.80 x 10-5 cm.

E = hν = hc/λ

Convert the wavelength from cm to meters:

[tex]\frac{2.80e-5cm}{1} *\frac{1m}{100cm}[/tex] = 2.8e-7 m

[tex]\frac{(6.626e-34)(3.00e8)}{2.8e-7}[/tex] = 7.1e-19 J

λ -> ν    ν = C/λ

Convert the wavelength from cm to meters:

[tex]\frac{2.80e-5cm}{1} *\frac{1m}{100cm}[/tex] = 2.8e-7 m

[tex]\frac{3.00e8}{2.8e-7}[/tex] = 1.1e15 Hz

h) Calculate the energy (E) and wavelength (l) of a photon of light with a frequency of 5.165 x 1014 Hz.

E = hν = hc/λ

(6.626e-34) (5.165e14) = 3.422e-19 J

ν -> λ    λ = C/ν

[tex]\frac{3.00e8}{5.165e14}[/tex] = 5.81e-7 m

[tex]\frac{5.81e-7m}{1}*\frac{1nm}{1e-9m}[/tex] = 581 nm

i) The wavelength of green light from a traffic signal is centered at 7.20 x 10-5 cm. Calculate the frequency.

λ -> ν    ν = C/λ

Convert the wavelength from cm to meters:

[tex]\frac{7.20e-5 cm}{1} *\frac{1m}{100cm}[/tex] = 7.2e-7 m

[tex]\frac{3.00e8}{7.2e-7}[/tex] = 4.2e14 Hz

j) If it takes 1.56 seconds for radio waves (which travel at the speed of light) to reach the moon from Earth, how far away is the moon?

  All we want to do here is to convert frequency (speed) to wavelength (distance). This problem requires a bit of thought, but it isn't bad once you realize that frquency is speed and wavelength is distance. It becomes just like the other problems after that. Also, I'll leave this distance in meters, but I think you can figure out how to convert it if it wants it in another unit.

  One second is equal to 1 Hertz, so our frequency is 1.56 Hz.

ν -> λ    λ = C/ν

[tex]\frac{3.00e8}{1.56}[/tex] = 1.92e8 m

  The actual distance from the earth to the moon via google is 3.84e7, but sometimes problems like this will mess with the numbers to make sure that you didn't just look up the answer. I'm still pretty sure that this is right, however.

k) Calculate the frequency of light that has a wavelength of 4.20 x 10-9m. Identify the type of electromagnetic radiation.

First, we convert wavelength to frequency, as normal:

λ -> ν    ν = C/λ

[tex]\frac{3.00e8}{4.20e-9}[/tex] = 7.14e16 Hz

Then we identify the electromagnetic wave type. You can look up a conversion chart for these on google, but since our frequency is in the e15 - e17 range, this light is considered ultraviolet.

explain the relationships that are present between the frequency, wavelength, and amplitude of a wave in 3 to 5 sentences. ​

Answers

Answer:

Wavelength refers to the length of a wave from one peak to the next. The amplitude or height of a wave is measured from the peak to the trough. The wavelength is measured from peak to peak. Wavelength is directly related to the frequency of a given wave form.

Which among the following is/are correct about solution (true solution)?
I. Concentration of solute will always be the same throughout a mixture
in a solution.
II. Solutions do not show scattering of light.
(a) only I (b) only II
(c) both I and II (d) none

Answers

Answer

A

Explanation

letter a kase tama

Other Questions
Anne works for a company that manufactures liquid dyes for clothing. She currently wants to mix up some 30%-concentrated red dye. She has 66 gallons of 21%-concentrated red dye, as well as plenty of 51%-concentrated red dye. How many gallons of the 51%-concentrated red dye will Anne need to add to the 21%-concentrated red dye to make a batch with a concentration of 30%? What is the ratio of the two quantities? Warning: different units! a 4 seconds to 2 min What are the strengths of 3rd person point of view? what is the least common factor of 25 and 8 Read "The Workers of Ellis Island"; and look at the photo. Three men standing behind a seated man. The first man is wearing all black with a white-collar. The second man is wearing a white shirt with a black jacket. The third man is wearing all white. Which statement is most likely accurate? The man on the left works as a surgeon at Ellis Island. The man who is standing in the center is a clerk at Ellis Island. The man who is sitting recently received medical attention. The man on the right has traveled from a foreign country. All of the following experience a widespread spatial distribution due to colonialism and imperialism EXCEPTA. EnglishB. Christianity C. SpanishD. FrenchE. Judaism DO NOT ANSWER IF YOU DO NOT KNOW, Will give brainliest, like, comment, and 5 points to answer Each of these is a pair of equivalent ratios, for each pair explain why they are equivalent. 5:1 and 15:310.2 and 25.5198:1,287 and 2:13 Solve for m: 2m + 5-3m = 7 Which one? A or B? Reasons for European Exploration To find new sea routes to India and China To find gold, silver, and other treasure?Which reason best completes this list?FTo spread democratic idealsTo improve efficiency in manufacturingHTo locate potential military alliesJTo claim new territory PLEASE PUT THE REAL ANSWER!!!!!! FOR BRAINLIEST TOO A packet of crisps contains 1.2 g of salt .Lucy eats 0.7 of the packet of crisps.How much salt does she eat Can someone help me out on this? correct me if im wrong The scale of a map says that 3 cm represents 8 km.1. What distance on the map (in centimeters) represents an actual distance of 20kilometers?2. What is the actual number of kilometers that is represented by 12 centimeters on the map?(Just type the number in your answer.) Solve the system of equations -2x+3y=3 x-2y=2 Which word best describes Dr. Reefy Pearl Co. both purchases and constructs various equipment it uses in its operations. The following items for two different types of equipment were recorded in random order during the calendar year 2017.Purchase Cash paid for equipment, including sales tax of $6,200 $130,200Freight and insurance cost while in transit 2,480Cost of moving equipment into place at factory 3,844Wage cost for technicians to test equipment 4,960Insurance premium paid during first year of operation on this equipment 1,860Special plumbing fixtures required for new equipment 9,920Repair cost incurred in first year of operations related to this equipment 1,612Construction Material and purchased parts (gross cost $248,000; failed to take 2% cash discount) $248,000Imputed interest on funds used during construction (stock financing) 17,360Labor costs 235,600Allocated overhead costs (fixed-$24,800; variable-$37,200) 62,000Profit on self-construction 37,200Cost of installing equipment 5,456Compute the total cost for each of these two pieces of equipment.Purchase equipment $_____Construction equipment $_____ What is the atomic number of arsenic (As)?O A. 33O B. 15C. 75D. 4SUB 1ST GETS BRAINILIEST!Sumer is important in world history because it was A. the world's first civilization. B. where human beings evolved. C. where the first fishing villages developed. D. the world's largest empire.When Judaism began, how was it different from other religions in the ancient world? A. Judaism had sacred texts. B. Judaism did not instruct its followers about how to lead their daily lives. C. Judaism held that there was one God who set down laws about right and wrong. D. Judaism held that there was good and evil in the universe.What led to the conquest of Sumer? A. the unification of city-states B. the peace among city-states C. the fighting among city-states D. the wealth of city-statesWhat did Sumerian sculptors create that was different from earlier sculptures? A. iron pieces B. realistic statues of humans C. hanging gardens D. Assyrian-style statuesWhich of the following correctly describe the Epic of Gilgamesh? Choose the TWO correct answers. A. It was the important legal code written by Sumerian king, Gilgamesh. B. It was written in cuneiform. C. It is a myth, telling the story of a legendary hero named Gilgamesh. D. It was written by Sumerian priests.