Earth's ______ is divided into ______ tectonic plates.

There are several types of rocks that form in geothermal areas. One is yellow in color and is called sulfur, the other is white and is called silica.

The yellow rock you mentioned could potentially be sulfur, which is a common mineral found in geothermal areas and is often a bright yellow color. Sulfur can form in a variety of ways, but in geothermal areas it often precipitates out of hot springs and fumaroles as the water cools and the sulfur solidifies.

As for the white rock you mentioned, there are a few possibilities depending on the specific location. In some cases, it could be a type of volcanic rock such as rhyolite or dacite, which can have a light or white coloration.

These types of rocks are often associated with volcanic activity and can form from magma that cools and solidifies near the Earth's surface.

Another possibility for the white rock could be a type of silica or siliceous mineral such as chalcedony or opal. These minerals can form in geothermal areas where hot water reacts with silica-rich rocks or sediments to create layers of silica deposits.

These deposits can sometimes be white or light-colored depending on the specific mineralogy.

Of course, there are many other types of rocks and minerals that can form in geothermal areas, so these are just a few possibilities based on the information provided. I hope this helps answer your question!

For more questions on rocks visit:

https://brainly.com/question/26046551

#SPJ11

In geothermal areas, the rock which is yellow in colour is called the "sulfur" shake. It is often related to volcanic movement.

In geothermal ranges, different sorts of rocks can be shaped due to the strong warm and action.

One case is the "sulfur" shake, which is yellow in color and frequently related to volcanic movement.

Be that as it may, the precise title of the white shake that shapes in geothermal regions is "silica" shake, commonly known as "siliceous sinter" or "geyserite."

Silica shake is shaped from the testimony of silica minerals, regularly showing up as white or pale-colored stores close to hot springs or fountains.

These rocks can show complicated and fragile formations due to the precipitation of broken-down silica within the geothermal water.

Learn more about rocks here:

https://brainly.com/question/26046551

#SPJ4

The complete question:

What are the sorts of rocks that frame in geothermal regions and what is the precise title of the white shake?

The Coriolis force is a result of the conservation of angular momentum.

As the earth rotates, different points on the surface move at different speeds depending on their distance from the axis of rotation. This causes a change in angular momentum, which must be conserved. The Coriolis force acts to compensate for this change by deflecting moving objects to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.

The Coriolis force has a significant effect on the surface of the earth. It causes objects that are moving across the earth's surface to deviate from their intended path, making it difficult to predict the movement of objects like airplanes, missiles, and ocean currents. The Coriolis force also causes the rotation of hurricanes and typhoons, and it plays a role in the circulation patterns of the earth's atmosphere and oceans. Overall, the Coriolis force is an important factor that affects many natural phenomena on the surface of the earth.

know more about Coriolis force: brainly.com/question/17968560

#SPJ11

Astronomers have been encouraged to consider Saturn's moon Enceladus as a potential habitat for life due to the discovery of geysers erupting from its surface.

These geysers release plumes of water vapor, indicating the presence of a subsurface ocean on Enceladus. Further analysis of these plumes has revealed the presence of organic compounds, salts, and even complex hydrocarbons, suggesting the existence of a chemical environment conducive to life. Enceladus, one of Saturn's moons, has attracted significant attention from astronomers as a possible site for extraterrestrial life. The primary discovery that has fueled this interest is the observation of geysers erupting from the moon's south polar region. These geysers expel plumes of water vapor, icy particles, and other materials into space. The presence of these plumes indicates the existence of a subsurface ocean beneath the icy crust of Enceladus.

Scientists have closely examined the composition of these plumes and made intriguing findings. The analysis has revealed the presence of organic compounds, which are the building blocks of life as we know it. Additionally, salts and complex hydrocarbons have been detected, further suggesting the possibility of a chemical environment suitable for life. The organic compounds and hydrothermal activity within Enceladus' subsurface ocean create a potential energy source that could support microbial life forms.

Furthermore, the Cassini spacecraft, which explored Saturn and its moons, discovered that the geysers on Enceladus contain a considerable amount of heat. This indicates the presence of hydrothermal vents on the ocean floor, similar to those found on Earth. On our planet, such hydrothermal vents have been found to harbor diverse ecosystems and support a variety of microbial life forms, independent of sunlight.

In combination, these findings have led astronomers to speculate that Enceladus might possess the necessary ingredients for life: liquid water, organic molecules, and a source of energy. The presence of subsurface oceans, hydrothermal activity, and complex chemistry make Enceladus a compelling candidate for astrobiological exploration. Future missions, such as NASA's planned Europa Clipper, will further investigate these intriguing possibilities and potentially unveil more evidence to support the hypothesis of life on Enceladus.

To learn more about saturn click here: brainly.com/question/13210144

#SPJ11

The name of the "supercontinent" that once covered nearly one-third of the earth's surface is Pangaea. It is believed that around 300 million years ago, all of the Earth's continents were connected in a single landmass known as Pangaea.

Over time, the tectonic plates started to move, and the continents started to drift apart from each other, eventually forming the land masses we know today. The theory of continental drift was first proposed by Alfred Wegener in 1912, who noticed that the coastlines of Africa and South America seemed to fit together like puzzle pieces.

Pangaea was surrounded by a vast ocean known as Panthalassa, which covered the rest of the Earth's surface. The breakup of Pangaea led to the formation of the Atlantic Ocean and other major features of the Earth's surface we see today. The concept of Pangaea helps us understand the history of the Earth's continents and how they have evolved over millions of years.

You can learn more about the supercontinent at: brainly.com/question/30467052

#SPJ11

The statement that is NOT true about obsidian is f). Obsidian is made of minerals.

Obsidian is a type of igneous rock formed from volcanic lava that has rapidly cooled. It is primarily composed of silica-rich glass, making it an amorphous solid rather than a crystalline mineral.

Therefore, obsidian does not consist of minerals, which are naturally occurring inorganic solids with a specific crystal structure. Instead, it is a natural, amorphous substance that lacks the crystalline structure characteristic of minerals.

Therefore, the correct answer is f). Obsidian is made of minerals.

Learn more about Obsidian : brainly.com/question/30479219

#SPJ11

While coastal wetlands do not have the primary function of removing toxins from runoff, they provide invaluable ecological services and are critical for maintaining the health and resilience of coastal ecosystems.

False.

Coastal wetlands are indeed important ecosystems, but their primary function is not to remove toxins from coastal runoff. Instead, they serve several other crucial roles, such as:

Learn more about coastal ecosystems

brainly.com/question/2563025

#SPJ11

Dense populations around the Nile River Delta face serious threats of disease and pollution.

The statement accurately describes a serious problem faced by populations living near the Nile River Delta, which is the dense populations around the delta leading to serious threats of disease and pollution.

The Nile River Delta, located in Egypt, is one of the most densely populated regions in the country.

The combination of fertile land and access to water resources has attracted a significant number of people to settle in this area. However, the high population density poses various challenges, particularly in terms of disease and pollution.

Waterborne illnesses, such as cholera and dysentery, can easily spread in areas with compromised sanitation and contaminated water sources.

Addressing the challenges of disease and pollution in the Nile River Delta requires comprehensive strategies that focus on improving sanitation infrastructure, access to clean water, healthcare services, and promoting sustainable practices in industries and agriculture.

By addressing these issues, the well-being of the population and the health of the delta's ecosystem can be improved.

Learn more about populations

brainly.com/question/15889243

#SPJ11

The diagram of the different ways rocks respond to stress at shallow depths illustrates various geological processes that occur due to the application of force or pressure on rocks. Shallow depths, in this context, refer to depths that are closer to the Earth's surface.

The diagram shows that rocks at shallow depths can either undergo elastic deformation, plastic deformation, or fracture depending on the magnitude and direction of the applied stress.
Elastic deformation occurs when rocks are subjected to low levels of stress, and they return to their original shape once the stress is released. On the other hand, plastic deformation occurs when rocks are subjected to high levels of stress, and they change shape permanently. A fracture occurs when rocks are subjected to extremely high levels of stress, and break into smaller pieces.
Therefore, the following statements are true regarding the diagram of the different ways rocks respond to stress at shallow depths: rocks can undergo elastic deformation, plastic deformation, or fracture depending on the magnitude and direction of the applied stress. These geological processes are crucial in understanding the behavior of rocks under different conditions, which is important in geology, engineering, and other related fields.

To know more about geology visit:

https://brainly.com/question/1047182

#SPJ11

Native Americans produced petroglyphs by etching into rock surfaces.

Petroglyphs are rock carvings or engravings made by Native Americans and other indigenous cultures. They were created by etching or carving into the surfaces of rocks, typically using stone tools or other sharp objects. Petroglyphs can be found on various types of rock, including cliffs, boulders, and cave walls.

The etchings often depict various symbols, animals, human figures, and geometric patterns that hold cultural, spiritual, or historical significance. Petroglyphs served as a means of communication, storytelling, and recording important cultural events and traditions for Native American communities.

They are valuable archaeological and cultural artifacts that provide insights into the rich history and artistic expressions of indigenous peoples.

To learn more about storytelling click here: brainly.com/question/29810192

#SPJ11

Earthquakes can indeed occur at depths of as great as 650 km. Among the given options, earthquakes at such depths are associated with: Subduction of cold, brittle oceanic lithosphere. Option D is the correct answer

These deep earthquakes are generally observed in subduction zones where one tectonic plate slides under another, causing the subducted plate to sink into the Earth's mantle. As the cold, brittle oceanic lithosphere is forced downward, it experiences increasing temperature and pressure. The resulting stress and deformation within the subducted plate can cause earthquakes to occur at great depths, also known as deep-focus earthquakes.

Therefore the correct answer is option D

For more question on lithosphere

https://brainly.com/question/628108

#SPJ11

Earthquakes that occur at depths of up to 650 km are primarily associated with subduction of cold, brittle oceanic lithosphere. This is because as the oceanic plate is pushed beneath the continental plate, it undergoes intense pressure and friction, causing it to fracture and release built-up energy in the form of seismic waves.

Earthquakes can also occur due to shear stress along major transform faults, where two tectonic plates slide past each other horizontally. However, these earthquakes are typically shallower in depth. Finally, while upwelling of magma beneath hotspots can cause volcanic activity, it is not typically associated with earthquakes at depths of 650 km or greater. Earthquakes that occur at depths as great as 650 km are associated with: D. Subduction of cold, brittle oceanic lithosphere. At subduction zones, one tectonic plate is pushed beneath another, causing the colder and more brittle oceanic lithosphere to be forced into the Earth's mantle. As it descends, it is subjected to increasing pressure and temperature, which can cause the release of stored energy in the form of earthquakes. These earthquakes can occur at various depths, including as deep as 650 km.

Learn more about subduction zones here: brainly.com/question/13788626

#SPJ11

In Iceland, some farmers may put soap in the Great Geysir to induce an eruption. This is done for safety reasons, as the soap helps to contain the eruption and prevent tourists from getting too close and falling in.

In Iceland, some farmers may add soap to the Great Geysir to induce an eruption, primarily for safety reasons. The soap serves the purpose of containing the eruption and ensuring that tourists maintain a safe distance, reducing the risk of accidents.

By breaking the surface tension of the water, the soap helps to regulate and control the eruption, making it less hazardous. It is important to note that the practice of using soap is not intended to create a more visually appealing or frothy eruption for tourists, nor is it meant to disrupt scientific studies on geysir eruptions.

Its main objective is to prioritize safety around the geysir site.

Learn more about Great Geysir: brainly.com/question/30205816

#SPJ11

It is true that the basalt is a sill intruded into older sedimentary rock.

Among the given options, statement D must be true based on the provided information. A sill refers to a horizontal intrusion of magma that solidifies between preexisting rock layers. In this case, the basalt layer containing xenoliths (fragments of the overlying sedimentary rock) is a result of magma intruding into older sedimentary rock layers.

The xenoliths are pieces of the surrounding sedimentary rock that were engulfed and incorporated within the basalt as it solidified. This scenario suggests that the basalt is younger than the sedimentary rock layers it intruded into, supporting the notion that it is a sill.

The relative ages and deposition processes of the sedimentary layers are not indicated, and there is no mention of the sedimentary layers being deposited at an angle. Therefore, statement D is the most reasonable and supported conclusion.

LEARN MORE ABOUT sedimentary rock here: brainly.com/question/29771190

#SPJ11

The main difference between thermo-dynamical pressure and electron-degeneracy pressure lies in their origin. Thermo-dynamical pressure is a result of the thermal energy and collisions between particles, while electron-degeneracy pressure arises due to the quantum mechanical properties of electrons in a dense system.

Thermo-dynamical pressure is the pressure that arises due to the motion of particles in a system. It is directly proportional to the temperature and number of particles present in the system. This pressure is significant in systems where the temperature is high, such as in stars, where nuclear reactions generate high temperatures and pressures.

On the other hand, electron-degeneracy pressure is the pressure exerted by the electrons in a system, due to their quantum mechanical properties. In a dense system, such as in a white dwarf or a neutron star, electrons are packed closely together, and their wave functions overlap. This leads to the exclusion principle, which states that no two electrons can occupy the same quantum state. Hence, the electrons in such a system become degenerate, and exert a pressure that resists further compression.

In summary, thermo-dynamical pressure arises due to thermal motion, while electron-degeneracy pressure arises due to quantum mechanical properties of electrons in dense systems. Thermo-dynamical pressure is significant at high temperatures, while electron-degeneracy pressure is significant in compact objects such as white dwarfs and neutron stars.

Know more about  thermo-dynamical pressure here:

https://brainly.com/question/17509867

#SPJ11

Approximately 8 seconds have elapsed between the P and S waves recorded on the Lincoln, NE seismic station. Approximately 15 seconds have elapsed between the P and S waves recorded on the Oklahoma City, OK seismic station.

Approximately 10 seconds have elapsed between the P and S waves recorded on the Little Rock, AR seismic station. The time elapsed between the P and S waves can be determined by measuring the distance between them on the scale bar provided.

The P and S waves are seismic waves that are generated during an earthquake. The P wave, also known as the primary wave, travels faster and arrives at a seismic station before the S wave, which is the second wave.

By measuring the distance between the P and S wave on the scale bar, we can determine the time difference between their arrivals at a particular seismic station. This time difference provides valuable information about the earthquake's location and magnitude. In this case, the scale bar allows us to estimate the time elapsed between the P and S wave recordings at the Lincoln, NE, Oklahoma City, OK, and Little Rock, AR seismic stations, giving us an indication of the earthquake's proximity to these locations.

Learn more about the earthquake here:- brainly.com/question/29500066

#SPJ11

The steep slope and thin topsoil on cuestas make it difficult to cultivate crops of such farming activities and manage soil erosion.

Cuestas are lengthened, thin edges with a lofty incline on one side and a delicate slant on the other. They are commonly shaped by differential disintegration of exchanging layers of hard and delicate stone.

Minimal cultivating exercises happen on cuestas on the grounds that the lofty slant on one side makes it challenging to develop crops and oversee soil disintegration. Also, the dirt on cuestas is generally dainty and less rich contrasted with the dirt in nearby valleys or flatlands.

This is on the grounds that the lofty incline takes into consideration fast seepage of water and supplements, leaving the dirt with minimal natural matter and supplements important for plant development.

Thus, cuestas are frequently utilized for brushing or left lacking, while at the same time cultivating exercises are gathered in the contiguous valleys or flatlands where soil conditions are better for agribusiness.

To learn more about farming, refer:

https://brainly.com/question/28617163

#SPJ1

The complete question is:

What are the reasons for little farming activities on cuestas, and how do the steep slope and thin topsoil affect the cultivation of crops on these elongated ridges?

Answer:

C. California

Explanation:

Of the given locations, California is least likely to be impacted by hurricanes and tropical storms. While New England, North Carolina, and Louisiana are all located on the East Coast and Gulf of Mexico where hurricanes are common, California is located on the West Coast and is less prone to these types of storms due to cooler water temperatures in the Pacific Ocean. However, it is important to note that California does experience its own unique natural hazards, such as wildfires and earthquakes.

Of the given locations, California is least likely to be impacted by hurricanes and tropical storms.

California is located on the west coast of the United States and has a cooler Pacific Ocean current, which makes it less prone to tropical storms. North Carolina and Louisiana, on the other hand, are located in the Atlantic Ocean and the Gulf of Mexico, respectively, where warmer waters and atmospheric conditions create the perfect environment for hurricanes and tropical storms. New England, although farther north, can still be impacted by tropical storms and hurricanes as seen in the past with Hurricane Sandy in 2012. Therefore, based on geographic location and climate conditions, California is the least likely to be impacted by hurricanes and tropical storms.

To learn more about hurricane, visit:

https://brainly.com/question/13661501

#SPJ11

The amount of sediment deposited at the mouth of a river system is likely to be increased by the presence upstream of which is Dams, therefore the correct answer is b.) II only

The construction of dams upstream can trap sediment and prevent it from reaching the mouth of the river, leading to increased sediment deposition at the mouth.

Artificial levees and embankments can also limit the flow of sediment downstream, but their impact on sediment deposition at the mouth may be less significant compared to dams.

Extensive natural wetlands can actually help filter and trap sediment, reducing the amount that reaches the mouth of the river.

Therefore the correct answer is b.) II only

Learn more about Dams: brainly.com/question/17294627

#SPJ11

You wish to navigate your yacht from Europe to the United States, type of map projection would be most useful is Mercator.

A map projection is any of a wide range of transformations used in cartography to represent the curved two-dimensional surface of a globe on a plane. In a map projection, locations' coordinates, which are typically expressed as latitude and longitude, are transformed into coordinates on a plane. Projection is one of the essential components of cartography.

The surface is always distorted in some way and to some extent when a sphere is projected on a plane. Depending on the purpose of the map, some distortions are acceptable and others are not; Consequently, various map projections exist to preserve some of the sphere-like body's properties at the expense of others. The investigation of guide projections is principally about the portrayal of their twists. There is no limit to the number of map projections that can be made. All the more by and large, projections are viewed as in a few fields of unadulterated science, including differential calculation, projective math, and manifolds. However, a cartographic projection is the focus of the term "map projection."

Learn more about map projection:

https://brainly.com/question/28765484

#SPJ4

The movement of air pollutants via evaporation and winds from tropical and temperate areas to polar regions is referred to as the grasshopper effect.

The grasshopper effect refers to the phenomenon where air pollutants, particularly persistent organic pollutants (POPs), are transported from lower latitudes (tropical and temperate areas) to higher latitudes (polar regions) through the process of evaporation and long-range atmospheric transport. This effect is named after the grasshopper, as it resembles the movement of grasshoppers over long distances.

Pollutants released in lower latitudes can evaporate into the atmosphere and be carried by wind currents over vast distances, eventually reaching polar regions. In these colder regions, the pollutants condense and accumulate in the environment, posing potential risks to ecosystems and human health. This phenomenon highlights the interconnectedness of pollution and the long-range transport of pollutants in the atmosphere.

Learn more about lower latitudes here:

https://brainly.com/question/1383547

#SPJ11

Mountains with sharp, jagged peaks are typically formed by tectonic forces, specifically through the process of uplift and erosion.

The formation of mountains with sharp, jagged peaks is primarily attributed to tectonic forces. These forces arise from the movement and interaction of Earth's tectonic plates. When two plates collide or converge, immense pressure builds up, causing the crust to deform and fold. This process, known as uplift, leads to the creation of mountain ranges.

As the uplifted mountains begin to rise, erosion becomes a significant factor in shaping their features. Water, in the form of rivers and glaciers, along with wind, gradually wears away the exposed rock surfaces. The erosive action of water erodes valleys and carries away sediment, while glaciers carve through the mountain peaks, grinding and sculpting the rocks. Wind erosion further contributes to the ruggedness of the peaks by eroding the exposed surfaces and creating sharp edges.

The combination of uplift and erosion over millions of years gradually transforms initially jagged peaks into more pronounced and sharper formations. The specific characteristics of the peaks depend on various factors, including the type of rock, climate, and the intensity and duration of tectonic activity. Overall, the forces of tectonic uplift and erosion working in tandem shape mountains into the distinctive and striking landscapes we observe with sharp, jagged peaks.

To learn more about mountain ranges click here:

brainly.com/question/13673154

#SPJ11

The most common cation in all non-organic gemstones is (2) aluminum. This is because aluminum is the third most abundant element in the Earth's crust, after oxygen and silicon.

In fact, many gemstones are formed from minerals that contain aluminum, such as beryl, corundum, and garnet. Aluminum is also a common component in the formation of other minerals, such as feldspar, which can also be used as gemstones. So, while other cations such as iron may be present in some gemstones, aluminum is by far the most common. It's worth noting, however, that organic gemstones, such as pearls and amber, do not contain aluminum or any other cation, as they are composed of organic material rather than minerals. In conclusion, the most common cation in non-organic gemstones is aluminum due to its abundance in the Earth's crust and its prevalence in many gem-forming minerals.

To know more about gemstones visit:

https://brainly.com/question/31603341

#SPJ11

The Burgess and Hoyt models are both theories that explain the spatial growth and development of cities. The Burgess model describes a concentric zone pattern, while the Hoyt model proposes a sector pattern.

The Burgess model, also known as the concentric zone model, was developed by sociologist Ernest Burgess in 1925. It suggests that cities grow outward from a central business district (CBD) in a series of concentric rings. The model identifies five zones: the CBD, a transitional zone of industry and low-income housing, a zone of working-class residential areas, a zone of better residences, and finally, a commuter zone of suburban housing. This model assumes that social and economic factors are the primary drivers of urban growth.

In contrast, the Hoyt model, developed by economist Homer Hoyt in 1939, proposes a sector pattern of urban growth. It suggests that cities expand along transportation corridors or sectors rather than concentrically.

Learn more about zone here:

https://brainly.com/question/1350513

#SPJ11

High grade metamorphic rocks are typically found in environments that have undergone intense heat and pressure. These rocks form deep within the Earth's crust or in areas of high tectonic activity where the rock is subjected to extreme forces.

These conditions cause the rock to recrystallize and transform into new mineral structures, resulting in the formation of high grade metamorphic rocks such as gneiss, schist, and migmatite.

One environment where high grade metamorphic rocks can be found is in mountain ranges, particularly in areas of subduction zones where tectonic plates collide. This collision causes intense pressure and heat to build up, resulting in the formation of high grade metamorphic rocks. Another environment where high grade metamorphic rocks can be found is in areas of deep continental crust, where the rocks are exposed to extreme heat and pressure from the Earth's internal forces.

Overall, high grade metamorphic rocks are rare and are only found in specific environments where the geological conditions are ideal for their formation.

Learn more about metamorphic rocks here:

https://brainly.com/question/25155804

#SPJ11

Answer: A locked section of fault is often identified by the existence of seismic gaps there.

A fault is a break or fracture in the Earth's crust where two blocks of rock move past each other. A locked section of a fault is a part of the fault that has not experienced any significant movement or earthquake activity in a while, leading to the accumulation of strain energy in the rocks on either side of the fault.

Seismic gaps are sections of a fault that have not ruptured in a significant earthquake over a certain period of time, usually over decades or longer. The existence of a seismic gap indicates that there is a buildup of strain energy in the rocks on either side of the fault, and that a large earthquake is likely to occur in the future to release this energy.

Geologists and seismologists use seismic gap analysis to identify areas that are at high risk for earthquakes. By monitoring seismic activity and the buildup of strain energy in the rocks, they can make predictions about when and where earthquakes are likely to occur. This information is crucial for disaster preparedness and risk management, as it can help authorities to plan for and mitigate the potential damage caused by earthquakes.

A locked section of a fault is often identified by the existence of seismic gaps or regions of low seismic activity.

Seismic activity refers to the occurrence of earthquakes or other vibrations in the Earth's crust. In a locked section of a fault, the two sides of the fault are stuck together and unable to move relative to each other,resulting in a buildup of strain energy that can eventually lead to a major earthquake.

When a fault has not experienced significant seismic activity for an extended period of time, it is considered to be "locked," meaning that it is under significant strain and has the potential to produce a large earthquake.

Scientists can identify these locked sections of faults by monitoring seismic activity in the region over time. If the region shows a pattern of low or no seismic activity, it suggests that the fault is locked and that a large earthquake may be imminent.

The identification of locked sections of faults is an important tool for assessing earthquake hazard and risk in a region.

By understanding which faults are locked and where they are located, scientists can better predict the likelihood and magnitude of future earthquakes, which can inform emergency planning and other mitigation measures.

To know more about locked section refer here

https://brainly.com/question/28372605#

#SPJ11

When the moon is at its highest point in the sky, it is said to be at its meridian, a new moon cannot be at its meridian because it is not visible in the sky.

Moon

To answer your question, a new moon would be at its meridian around solar noon. Here's the step-by-step explanation:

Keep in mind that solar noon is not always exactly 12:00 PM, as it can vary depending on your location and time zone.

Learn more about meridian noon: brainly.com/question/30889240

#SPJ11

An increase in cloud cover and a corresponding decrease in absorption of solar radiation is an example of a negative feedback mechanism in the Earth's climate system. This feedback helps regulate the Earth's temperature and prevents it from experiencing extreme fluctuations.

Clouds are an important component of the Earth's climate system. They play a significant role in regulating the amount of solar radiation that reaches the Earth's surface. When there is an increase in cloud cover, the amount of solar radiation that reaches the Earth's surface decreases. This decrease in solar radiation absorption leads to a cooling effect on the Earth's surface.

This cooling effect, in turn, causes a decrease in the amount of water vapor that is evaporated into the atmosphere. Water vapor is a potent greenhouse gas that traps heat in the Earth's atmosphere. When there is a decrease in the amount of water vapor, there is less greenhouse gas effect, which further contributes to cooling of the Earth's surface. This negative feedback mechanism helps to regulate the Earth's temperature and prevent it from experiencing extreme fluctuations.

To learn more about Solar radiation :brainly.com/question/30621213

#SPJ11

Deserts and plains dominate the landform in Australia.

Australia is known for its vast arid regions, making deserts and plains the predominant landforms. The continent is home to expansive desert landscapes, such as the Great Victoria Desert and the Simpson Desert. These arid regions are characterized by dry and infertile soils, sparse vegetation, and extreme temperatures. The deserts cover a significant portion of the continent's interior, contributing to the unique and rugged beauty of the Australian Outback.

While deserts and plains dominate, Australia also features some mountainous areas. The Australian Alps and the Great Dividing Range are notable mountain ranges, but they do not encompass as much of the continent's land area as the deserts and plains. These mountainous regions provide scenic landscapes, including snow-capped peaks and alpine ecosystems.

Forests and wetlands, although present, are not as widespread as the arid landscapes. Australia is known for its unique flora and fauna, and some forested areas exist, such as the Daintree Rainforest in Queensland and the Tarkine Forests in Tasmania. Wetlands, including coastal mangroves and inland marshes, also contribute to the country's ecological diversity but are not as dominant as the deserts and plains.

Overall, the arid nature of Australia's deserts and the vastness of its plains make them the prominent landforms that shape the continent's geography and natural environment.

Learn more about vegetation, brainly.com/question/32345459

#SPJ11

Answer: I belive the answer is, A. intrusive igneous

And again, i am very sorry if i am wrong!

Current climate change trends show all of the following except increased land ice. The other trends include increased land temperatures, increased sea temperatures, increased CO2 in the atmosphere, and sea level rise.

Current climate change trends show increased land temperatures, increased sea temperatures, increased CO2 in the atmosphere, and sea level rise.

However, the statement mentions "increased land ice" as an exception. It is important to note that overall, land ice is melting at an accelerated rate due to global warming, leading to declining ice masses in glaciers and ice sheets.

This melting contributes to rising sea levels. Therefore, increased land ice is not consistent with the observed trends of climate change.

Learn more about Current climate: brainly.com/question/1789619

#SPJ11

In the survey feedback process, process analysis involves developing plans for improvement.

Process analysis is an important step in the survey feedback process. It involves examining the various processes and procedures within an organization or system that are related to the survey results. The purpose of process analysis is to identify areas for improvement and develop plans to address them. This can include analyzing the data collected from the survey, identifying patterns or trends, and pinpointing areas where changes or adjustments are needed. By conducting a thorough process analysis, organizations can gain insights into their operations and make informed decisions to enhance performance, productivity, and overall effectiveness. The goal is to identify opportunities for improvement and implement strategies or interventions to address any identified gaps or weaknesses. Process analysis plays a crucial role in the survey feedback process as it helps organizations take proactive measures to optimize their processes and drive positive change.

To learn more about Feedback, brainly.com/question/32133491

#SPJ11