The element x is chromium which forms a crystal with a body centered cubic unit cell.
What is centered cubic unit cell?A central atom is surrounded by eight atoms at each of the eight corners in the BCC structure. Along the cube diagonals, the atoms in the center and corners make contact. Each BCC unit cell contains two atoms: one complete atom in the center and one shared by eight unit cells in each corner.
use formula
d= [tex]\frac{M*Z}{V*N}[/tex]
D = Density
M = molecular mass
Z = 2
N = Avogadro number
to know more about unit cell , visit ;
brainly.com/question/29537966
#SPJ1
if the density of a gas is 1.87 grams/liter at 34.0 c and 745 mm hg, what will be its density at 84.0 c and 721 mm hg?
The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
The density of a gas can be calculated using the following formula:
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).
Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (745 x Molar Mass) / (0.08206 x 307)
Density = 28.91 x Molar Mass g/L
Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,
Molar Mass = Density x (Gas Constant x Temperature) / Pressure
Molar Mass = 1.87 x (0.08206 x 307) / 745
Molar Mass = 0.103 g/mol
Now, we can find the density of the gas at 84° C and 721 mm Hg.
Temperature (K) = 84 + 273 = 357 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (721 x 0.103) / (0.08206 x 357)
Density = 2.50 g/L
Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
To know more about density, refer here:
https://brainly.com/question/12022043#
#SPJ11
What does the phrase, “When it pours, the desert stores” refer to?
Many organisms come out only at night, when it is cooler.
Organisms capture rainwater and save it for later.
Sand builds up in sand dunes.
There’s a lot of activity in the desert after a rainstorm.
B. Organisms capture rainwater and save it for later.
How does the desert stores water?The desert stores water in several ways. One of the most important is through the formation of underground aquifers, which are underground layers of permeable rock, sediment, and soil that store and transmit water. The water is held in the pores of the aquifer material, allowing it to be accessed through wells.
Water is also stored in the soil and vegetation, and in the form of snow and ice in some desert regions.
Learn more about deserts here:
https://brainly.com/question/1193694
#SPJ1
What are the best dopants that are added to silicon as a means of creating a quality semiconductor? Elements with the same number of valence electrons as silicon. Elements that are radioactive. Elements with one more or one fewer valence electron than silicon. Elements in the same row of periodic table as silicon.
Answer:
boron (3 valence electrons = 3-valent) and phosphorus (5 valence electrons = 5-valent).
For the scenario below, the system and surroundings are identified. Select the correct sign of q for both the system and surroundings as they are defined. Using a hand warmer in the winter 1. System: Your hand [ Select ] 2. Surroundings: The hand warmer packet [ Select ]
For the scenario given, the system and surroundings are identified as follows:System: Your handSurroundings: The hand warmer packetThe sign of q for both the system and surroundings as they are defined:For the system: q < 0 (negative)For the surroundings: q > 0 (positive).
Explanation:In the given scenario, the system is the hand of the person, and the surroundings are the hand warmer packet. The process involves heat transfer from the hand warmer to the hand to warm it up. Heat is the energy transferred between a system and its surroundings due to the difference in temperature. In this case, the hand warmer packet is at a higher temperature than the hand, so heat flows from the surroundings to the system. As a result, the sign of q for the system would be negative (q < 0) as it is gaining heat from the surroundings, and the sign of q for the surroundings would be positive (q > 0) as it is losing heat to the system.
For more such questions on System and surroundings
https://brainly.com/question/15009941
#SPJ11
The acceleration of a particle in an electric field depends on the charge-to-mass ratio of the particle.(a) compute e / m for a proton and find its acceleration in a uniform electric field of magnitude 100 n / c. (b) find the time it takes for a proton initially at rest in such a field to reach the speed of 0.01c
Answer:91
Explanation:because I am just very smart and this is the answer <3
in which case the reaction in the gas mixture will proceed nonspontaneously in the forward direction?
The reaction in the gas mixture will proceed non-spontaneously in the forward direction when the standard free energy change (∆G°) is positive or zero.
What is spontaneous reaction?In chemical reactions, the term spontaneity refers to whether the reaction proceeds on its own or requires an input of energy to occur. When ∆G° is negative, a reaction is said to be spontaneous in the forward direction, meaning it occurs naturally without any external input of energy. When ∆G° is positive or zero, on the other hand, the reaction proceeds nonspontaneously in the forward direction.
In other words, the reaction requires energy input to proceed. The free energy change (∆G) of a reaction is related to its standard free energy change (∆G°) through the equation:
∆G = ∆G° + RT ln(Q)
where, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.
If Q = 1, the reaction is at equilibrium and ∆G = ∆G°. If Q < 1, the reaction proceeds spontaneously in the forward direction (∆G < 0), and if Q > 1, the reaction proceeds spontaneously in the reverse direction (∆G > 0).
Learn more about Spontaneous reaction here:
https://brainly.com/question/13790391
#SPJ11
Converting moles to mass in grams using dimensional analysis
1. 0. 0728 mol to Silicon
2. 5. 5mol of H2O
3) 0. 0728 of Ca(H2PO4)2
1. 0. 0728 mole to Silicon is equals to 2.044 gram.
2. 5. 5mol of H2O is equals to 99.08 gram.
3. 0. 0728 of Ca(H2PO4)2 is equals to 17.038 gram.
The Moles can be converted to mass in grams by multiplying the molecular weight by the number of moles for the substance. The molecular weight is defined as the number of grams per mole for the substance and gives the conversion factor for moles to grams for that particular substance.
The molecular weight is defined as the mass of a given molecule: it is measured in grams per mole. According to Dalton's different molecules of the same compound may have different molecular masses because they contain different isotopes of an element.
1. 0.0728 mole of silicon.
The molecular weight of silicon is 28.09 g/mole.
= 0.0728 mole * 28.09 g/mole
= 2.044 gram.
2. 5. 5mol of H2O
The molecular weight of water is 18.01528 g/mole.
= 5. 5mole * 18.01528 g/mole
= 99.08 gram
3. 0. 0728 of Ca(H2PO4)2
Molecular weight of Ca(H2PO4)2 is 234.05 g/mole.
= 0. 0728mole * 234.05 g/mole
= 17.038 gram
To learn more about moles
https://brainly.com/question/13314627
#SPJ4
how is the atomic number of an atom determined? view available hint(s)for part a how is the atomic number of an atom determined? counting the number of atoms of an element in a mineral counting the number of protons circling the nucleus counting the number of protons in the nucleus counting the number of neutrons in the nucleus counting the number of protons and neutrons in the nucleus
The atomic number of an atom is determined by counting the number of protons in the nucleus. This is because the atomic number is defined as the number of protons in an atom's nucleus.
What is atomic number?
The atomic number is the number of protons in an atom. The periodic table is arranged according to atomic number, which determines the chemical properties of an element. All neutral atoms of a given element have the same number of protons and electrons.
A neutral atom has an equal number of positively charged protons and negatively charged electrons, which results in no overall charge.The electron arrangement in an atom determines how it will interact with other atoms. The element's chemical properties are determined by the electron configuration of its atoms.
The number of protons in the nucleus determines the element's atomic number, which is a fundamental property of the element. The atomic number identifies the element and its position on the periodic table.
To know more about atomic number refer here: https://brainly.com/question/8834373#
#SPJ11
what is the difference between epinephrine and norepinephrine?
Epinephrine and norepinephrine are both hormones and neurotransmitters produced by the adrenal gland and involved in the body's response to stress.
While they have similar effects on the body, they differ in their specific physiological and pharmacological actions. Norepinephrine acts primarily as a neurotransmitter in the sympathetic nervous system, regulating the "fight or flight" response. It increases heart rate, blood pressure, and blood glucose levels, and constricts blood vessels. Norepinephrine is also involved in mood regulation, attention, and cognitive function. Epinephrine, on the other hand, acts as both a neurotransmitter and hormone, and has broader effects on the body. It increases heart rate, blood pressure, and blood glucose levels, but also dilates the airways and blood vessels in skeletal muscle.
To know more about Epinephrine, here
brainly.com/question/28165898
#SPJ4
3. Outline how you would prepare each compound from a named alcohol. Give essential reagents &
conditions and a structural equation in each case (which need not be balanced)
a) methanoic acid
b) methanal
c) butanone
d) pentanal
e) hexanoic acid
1) hexanal
g) hexan-3-one
Answer:
a) Methanoic acid can be prepared from methanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3OH + 2[O] → HCOOH + H2O
b) Methanal (formaldehyde) can be prepared from methanol through oxidation using potassium dichromate and sulfuric acid. The reaction proceeds as follows:
CH3OH + [O] → CH2O + H2O
c) Butanone can be prepared from 2-butanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:
CH3CH(OH)CH2CH3 + [O] → CH3COCH2CH3 + H2O
d) Pentanal can be prepared from 1-pentanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3(CH2)3CH2OH + 3[O] → CH3(CH2)3CHO + 3H2O
e) Hexanoic acid can be prepared from 1-hexanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3(CH2)4CH2OH + 4[O] → CH3(CH2)4COOH + 4H2O
f) Hexanal can be prepared from 1-hexanol through oxidation using pyridinium chlorochromate. The reaction proceeds as follows:
CH3(CH2)4CH2OH + [O] → CH3(CH2)5CHO + H2O
g) Hexan-3-one can be prepared from 3-hexanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:
CH3(CH2)4CH(OH)CH3 + [O] → CH3(CH2)3COCH3 + H2O
(please could you kindly mark my answer as brainliest)
4. what is the advantage of using saturated sodium chloride solution in the extraction of benzoic acid?
The advantage of using saturated sodium chloride solution in the extraction of benzoic acid is that it helps to separate benzoic acid from other components in a solution due to its high solubility.
Extraction refers to the process of separating a particular compound from a mixture using a solvent. It's used to purify compounds, remove impurities, or separate two different compounds.
Benzoic acid is a white crystalline solid that can be extracted from benzoin or benzene, and it has a range of applications.
Sodium chloride is a common reagent used in the extraction of benzoic acid.
The isotonic nature makes it useful as a reagent for the separation of organic and aqueous layers. It causes the organic phase to separate easily:
Thus, overall, the use of saturated sodium chloride solution can help to improve the efficiency of the extraction process, allowing for better separation of the organic compound from the aqueous layer.
Learn more about the extraction of benzoic acid here:
brainly.com/question/28692026
#SPJ11
what the deffinition of structural formula?
Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.
Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.
The structural formula also shows the spatial arrangement of atoms and groups in a compound.
There are two types of structural formulas: condensed structural formulas and Lewis structures.
Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.
The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.
Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.
These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.
For similar question on structural formula.
https://brainly.com/question/26388921
#SPJ11
In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all _____The dropper bottles containing the cations to be studied were all ______salt solutions
The dropper bottles containing the anions to be studied were all sodium hydroxide (NaOH) solutions. The dropper bottles containing the cations to be studied were all potassium chloride (KCl) salt solutions.
Salt- A salt is a chemical compound that is produced by the reaction of an acid with a base, which results in a substance that is made up of positively charged ions and negatively charged ions, known as cations and anions, respectively.
Soluble salt- It is formed by reacting an alkali and an acid in a solution. In this case, NaOH and KCl are reacted to form the soluble salt solution, i.e., NaCl solution.
To learn more about "soluble saltlab", visit: https://brainly.com/question/29311762
#SPJ11
A student is designing a new insulated drink cup using unconventional materials. They will have an inside and an outside cup with a material from the table in between the cups as insulation.Which material should they use to prevent heat loss?
The best material for insulation in this case would be Styrofoam. Styrofoam is lightweight, strong, and an excellent thermal insulator. It is composed of tiny bubbles of air that are suspended in a matrix of plastic. The air trapped inside the bubbles acts as a thermal barrier, keeping heat out or in, depending on the application.
Its lightweight nature makes it easier to manipulate, while its strength gives it the durability needed to keep a drink hot or cold. Its insulation properties also make it the perfect material for the student's insulated drink cup.
Styrofoam can be cut and shaped easily, making it a great material for use in drink cups. The material is also easy to clean and resistant to water and other liquids, which makes it ideal for frequent use. Additionally, Styrofoam is both affordable and widely available, making it an ideal choice for the student's project.
Know more about thermal insulator here:
https://brainly.com/question/23134662
#SPJ11
Calculate Delta H r* n for Ca(s) + 1/2 * O_{2}(g) + C*O_{2}(g) -> CaC*O_{3}(s)
The standard molar enthalpy of reaction for the given reaction is -822 kJ/mol.
The balanced chemical equation for the reaction is:
Ca(s) + 1/2 O2(g) + CO2(g) → CaCO3(s)
The standard enthalpies of formation for the reactants and product are:
ΔH°f[Ca(s)] = 0 kJ/mol
ΔH°f[O2(g)] = 0 kJ/mol
ΔH°f[CO2(g)] = -385 kJ/mol
ΔH°f[CaCO3(s)] = -1207 kJ/mol
The ΔH°r for the reaction can be calculated using the following formula:
ΔH°r = ΣnΔH°f(products) - ΣnΔH°f(reactants)
ΔH°r = [ΔH°f(CaCO3(s))] - [ΔH°f(Ca(s)) + 1/2ΔH°f(O2(g)) + ΔH°f(CO2(g))]
ΔH°r = [-1207 kJ/mol] - [0 kJ/mol + 1/2(0 kJ/mol) + (-385 kJ/mol)]
ΔH°r = -822 kJ/mol
Delta (Δ) is a symbol used to represent a change or difference in a physical or chemical property. It is often used to denote the change in energy or enthalpy of a chemical reaction, as well as changes in temperature, pressure, or concentration.
For example, when a chemical reaction occurs, the difference in energy between the reactants and products can be represented by the symbol ΔH, with a positive value indicating an endothermic reaction (absorbing heat) and a negative value indicating an exothermic reaction (releasing heat). Delta can also be used to represent changes in other properties, such as entropy (ΔS) or free energy (ΔG), which are important in predicting the spontaneity and direction of chemical reactions.
To learn more about Delta visit here:
brainly.com/question/23081977
#SPJ4
Is decanoic acid soluble or insoluble in NaOH solution?
In a NaOH solution, decanoic acid is soluble. Because of its lengthy, nonpolar hydrocarbon chain, decanoic acid is inert in water.
Which of the following substances can be dissolved in NaOH solution?Because there is an acidic H atom present and because of the strong -I action of the SO(2) group, sulphonamides generated from 1 nucleophiles are soluble in NaOH.
How come amines won't dissolve in NaOH?Hence, the weak hydrogen bonds or multipole forces of amines have a hard time breaking through the covalently bonded force in NaOH. Moreover, the hydrophobic organic moieties of amines stop them from dissolving into ionic NaOH. As a result, amines cannot dissolve in NaOH.
To know more about hydrocarbon visit:
https://brainly.com/question/17578846
#SPJ1
which of the compounds of h2c2o4 , ca(oh)2 , koh , and hi , behave as acids when they are dissolved in water?
The compounds of H2C2O4 (oxalic acid), Ca(OH)2 (calcium hydroxide), and KOH (potassium hydroxide) all behave as acids when they are dissolved in water. HI (hydrogen iodide) is an inorganic compound and will not behave as an acid when dissolved in water.
Out of the compounds of H2C2O4, Ca(OH)2, KOH, and HI, the only acid is HI (Hydroiodic acid).Explanation:The strength of an acid is determined by its ability to donate a proton (H+). When an acid is dissolved in water, it dissociates and releases hydrogen ions (H+), which contribute to the acidic nature of the solution. HI (Hydroiodic acid) is the only acid among H2C2O4, Ca(OH)2, KOH, and HI.Calcium hydroxide (Ca(OH)2) and potassium hydroxide (KOH) are strong bases that are completely ionized in water. As a result, they dissociate and release hydroxide ions (OH-) into the solution, making it alkaline. Oxalic acid, which is H2C2O4, is a dicarboxylic acid with a chemical structure of HOOC-COOH. It is a weak organic acid that is used to clean equipment in laboratories.HI (Hydroiodic acid) is a hydrogen halide compound that is soluble in water. It is a strong acid that dissociates completely in water, releasing hydrogen ions (H+). When HI is dissolved in water, it acts as an acid and increases the acidity of the solution. Therefore, the correct answer is that HI (Hydroiodic acid) behaves as an acid when dissolved in water.
For more such questions on Oxalic acid
https://brainly.com/question/18648804
#SPJ11
H2C2O4, also known as oxalic acid, is a weak organic acid that behaves as an acid when dissolved in water. In aqueous solution, it donates H+ ions to the water, resulting in an acidic solution.
Ca(OH)2 and KOH are both strong bases and do not behave as acids when dissolved in water. They accept H+ ions from water to form OH- ions, resulting in a basic solution.HI, also known as hydroiodic acid, is a strong acid that behaves as an acid when dissolved in water. It dissociates completely in water, producing H+ ions and I- ions.In summary, H2C2O4 and HI behave as acids when dissolved in water, while Ca(OH)2 and KOH behave as bases. The behavior of a compound in water is determined by its chemical properties, such as the strength of its acid or base character, and its ability to donate or accept H+ ions.For such more question on oxalic acid
https://brainly.com/question/15464187
#SPJ11
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. How much plutonium will be left in 87.7 years? A) None B) 0.25 kg C) 0.5 kg D) 1.0 kg E) 2 kg
The answer is C) 0.5 kg. This is because Plutonium-238 has a half-life of 87.7 years, which means that after 87.7 years, half of the original amount of Plutonium-238 will remain. In this case, that would be 2 kg * 0.5 = 0.5 kg.
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half-life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. Radioactive decay is a random event. So, it is impossible to predict when a specific atom will decay. But we can find how much radioactive material is remaining after a specific period of time.
The half-life of a radioactive material is the time required for half of the radioactive material to decay. The formula to calculate the remaining material is:
N(t) = N0 × (1/2)^(t/t1/2)
Where N(t) is the remaining material at time t, N0 is the initial material, t1/2 is the half-life, and t is the elapsed time.
The initial material is 2 kg, half-life is 87.7 years, and the elapsed time is also 87.7 years.
N(87.7) = 2 kg × (1/2)^(87.7/87.7)= 1 kg × 0.5= 0.5 kg
Therefore, the amount of plutonium remaining after 87.7 years will be 0.5 kg. So, the answer is option C.
For more such questions on Plutonium , Visit:
https://brainly.com/question/13217330
#SPJ11
If you collect 82.5 g of carbon dioxide from this reaction (actual yield) what was the percent yield.
1. (10 points) From the Carbonate Lab, if 234 grams of HCI react with 425 grams of Calcium carbonate:
-Write out the balanced equation for this reaction
What is the limiting reagent?
What is the theoretical yield of Carbon dioxide in grams?
-If you collect 82.5 g of carbon dioxide from this reaction ( actual yield) what was the perfect yield.
I think i can help u with this
The balanced equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3) is:
2HCl + CaCO3 → CaCl2 + CO2 + H2O
To determine the limiting reagent, we need to calculate the number of moles of each reactant and compare them to their stoichiometric coefficients in the balanced equation. Let's start with hydrochloric acid:
Number of moles of HCl = 234 g / 36.46 g/mol = 6.41 mol
Now let's calculate the number of moles of calcium carbonate:
Number of moles of CaCO3 = 425 g / 100.09 g/mol = 4.25 mol
According to the balanced equation, the stoichiometric ratio of HCl to CaCO3 is 2:1. Therefore, we can see that calcium carbonate is the limiting reagent since we have fewer moles of CaCO3 than HCl, and we need twice as many moles of HCl to react completely with CaCO3.
To find the theoretical yield of CO2, we need to use the stoichiometry of the balanced equation. We see that the stoichiometric ratio of CaCO3 to CO2 is 1:1, so for every mole of CaCO3, we get one mole of CO2. Therefore, the theoretical yield of CO2 can be calculated as:
Theoretical yield of CO2 = 4.25 mol x 1 mol CO2/ 1 mol CaCO3 x 44.01 g/mol = 187.76 g
Now we can calculate the percent yield of CO2 by using the formula:
Percent yield = (actual yield / theoretical yield) x 100%
Substituting the given values, we get:
Percent yield = (82.5 g / 187.76 g) x 100% = 43.91%
Therefore, the percent yield of CO2 is approximately 43.91%.
What element from space is pulled by gravity and turn into a protostar?
Elements from space that are pulled by gravity and turn into a protostar are mostly made up of hydrogen.
Hydrogen is the most abundant element in the universe and is present in large quantities in space. When gravity pulls together a large amount of hydrogen gas and dust, it can create a protostar. As the hydrogen particles come together, they begin to heat up due to the increased pressure and eventually, the temperature and pressure become so great that nuclear fusion can occur, creating a fully-fledged star. Therefore, the process of star formation is primarily driven by the gravitational attraction between hydrogen atoms. Other elements such as helium, carbon, and oxygen may also be present in space, but their role in star formation is typically secondary.
To know more about hydrogen click here:
brainly.com/question/31018544
#SPJ4
how does absorbance relate to concentration in solutions?
Absorbance is the measure of how much light is absorbed by a sample solution at a particular wavelength. The Beer-Lambert law states that there is a linear relationship between the absorbance of a solution and its concentration.
Specifically, absorbance is directly proportional to the concentration and path length of the sample solution, and inversely proportional to the intensity of the incident light. This relationship can be expressed mathematically as A = ɛcl, where A is the absorbance, ɛ is the molar absorptivity (a constant unique to each substance), c is the concentration of the solution in mol/L, and l is the path length of the sample cell in cm.
To know more about Beer-Lambert, here
brainly.com/question/30216846
#SPJ4
In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all _____The dropper bottles containing the cations to be studied were all ______salt solutions
In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all soluble salt solutions. The dropper bottles containing the cations to be studied were all insoluble salt solutions.
What is Solubility?Solubility refers to the ability of a substance to dissolve in a particular solvent. A compound is referred to as soluble if it dissolves in water, and insoluble if it does not. Solubility is a crucial physical property in the characterization of the chemical nature of a substance.
Soluble saltA salt that can be dissolved in a solvent, such as water, is known as a soluble salt. Soluble salts can dissolve in water or other solvents to create a clear or transparent solution.
Insoluble saltA salt that cannot be dissolved in a solvent, such as water, is referred to as an insoluble salt. When insoluble salts are mixed with water, they form a cloudy or opaque mixture that gradually settles out or falls to the bottom.In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all soluble salt solutions. The dropper bottles containing the cations to be studied were all insoluble salt solutions.
See more about Solubility in:
https://brainly.com/question/9098308
#SPJ11
the addition of which of the following to a culture medium will neutralize acids? buffers ph heat carbon
The addition of buffers to a culture medium will neutralize acids.
What are buffers?Buffer solutions are aqueous solutions that resist modifications in pH when limited quantities of an acid or base are added to them. Buffers are essential in biological and chemical systems since many chemical processes are pH-dependent. These buffers keep biological fluids from becoming too acidic or alkaline, ensuring that the fluids remain in a specific pH range. When acid or base is added to a buffer solution, it resists changes in pH.
The pH range of buffers varies. Several buffers have a pH range that is appropriate for a particular chemical system. These buffers are effective at neutralizing the acids present in culture media. So, the addition of buffers to a culture medium will neutralize acids, making it the right option among the given options.
learn more about buffer solutions
https://brainly.com/question/27371101
#SPJ11
The formula of Benadryl is C17H21NO. How many moles of C are present in 0. 733 mol of Benadryl?
In 0.733 mol of Benadryl, there are 0.312 molecules of carbon.
The molecular formula of Benadryl is C17H21NO. To determine how many moles of carbon are present in 0.733 mol of Benadryl, we need to first find the molar mass of Benadryl.
Molar mass of Benadryl = (17 x 12.01 g/mol for carbon) + (21 x 1.01 g/mol for hydrogen) + (1 x 14.01 g/mol for nitrogen) + (1 x 16.00 g/mol for oxygen)
= 257.30 g/mol
Now, we can use the molar mass of Benadryl to calculate the number of moles of carbon present in 0.733 mol of Benadryl.
Number of moles of carbon = Number of moles of Benadryl x (Number of atoms of carbon in 1 molecule of Benadryl / Total number of atoms in 1 molecule of Benadryl)
Number of atoms of carbon in 1 molecule of Benadryl = 17
Total number of atoms in 1 molecule of Benadryl = 17 + 21 + 1 + 1 = 40
Substituting the values, we get:
Number of moles of carbon = 0.733 mol x (17/40) = 0.312 mol
Therefore, there are 0.312 moles of carbon present in 0.733 mol of Benadryl.
To learn more about Benadryl refer to:
brainly.com/question/13266374
#SPJ4
I need this solved pls!!! Thanks! I know this is a lot, but can you solve at least one part?
The molar mass of calcium carbonate is 100 grams . This is determined by Stoichiometry.
What is molar mass ?The molar mass (M) of a chemical compound is defined in chemistry as the ratio of mass to substance (measured in moles) of any sample of said compound. The molar mass of a substance is a bulk property, not a molecular property. The molar mass is an average of many instances of the compound, which often vary in mass due to isotopes present. The molar mass is most commonly calculated from standard atomic weights and is thus a terrestrial average and a function of the relative abundance of the constituent atoms on Earth. For bulk quantities, the molar mass is appropriate for converting between the mass of a substance and the amount of a substance.
In Calcium carbonate
mass of calcium = 40 g
mass of carbon = 12 g
mass of three oxygen atoms = 48 g
adding all molar mass = 100 g
to know more about molar mass , visit ;
brainly.com/question/22997914
#SPJ1
a process in which the solution containing alcohol is heated and the vapors are collected and then condensed into liquid form again. Steam vapors rise and collected much alcohol contentFermentationDistillation
The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.
According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.
Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.
In the chemical industry, distillation is used to separate and purify various compounds and solvents.
In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.
Learn more about Distillation here:
brainly.com/question/29037176
#SPJ4
Describe a hybridization scheme for the central atom and molecular geometry of the triiodide ion,
Answer:
Explanation:
I_3^−
The triiodide ion, I3−, is a polyatomic anion composed of three iodine atoms. It has a central iodine atom, which is surrounded by two other iodine atoms in a trigonal planar geometry. The hybridization of the central atom is sp2. This is because the central atom has 3 electron pairs in its valence shell, which means it needs to form three bonds with the other atoms. This requires the central atom to use one s-orbital and two p-orbitals to form three sp2 hybrid orbitals. These three sp2 orbitals are then used to form the three bonds with the other two iodine atoms, resulting in a trigonal planar geometry.
A chemist dissolves 551. mg of pure barium hydroxide in enough water to make up 180. mL of solution. Calculate the pH of the solution. (The temperature of the solution is 25 °C.) Be sure your answer has the correct number of significant digits.______.
The pH of the solution of 551 mg of Barium Hydroxide and 180 mL water is 12.6.
What is a solution?A solution in chemistry is a specific kind of homogenous mixture made up of two or more components.
A solute is a material that has been dissolved in the solvent in such a combination.
The first step is to calculate the molarity of the barium hydroxide solution. We can use the formula:
Molarity (M) = moles of solute / volume of solution (in liters)
The molar mass of barium hydroxide [Ba(OH)²] is 171.34 g/mol. Therefore, the number of moles of Ba(OH)² in 551 mg (0.551 g) can be calculated as:
moles of Ba(OH)² = mass / molar mass = 0.551 g / 171.34 g/mol = 0.003214 mol
The volume of the solution is 180 mL, which is equivalent to 0.180 L. Therefore, the molarity of the barium hydroxide solution is:
Molarity = 0.003214 mol / 0.180 L = 0.01786 M
Barium hydroxide is a strong base that completely dissociates in water to give barium ions (Ba²) and hydroxide ions (OH⁻):
Ba(OH)²⁺ (s) → Ba²⁺ (aq) + 2OH⁻ (aq)
In an aqueous solution, the hydroxide ions can react with water to produce hydroxide ions and hydronium ions (H₃O⁺):
OH⁻ (aq) + H₂O (l) → H₃O⁺ (aq) + OH⁻- (aq)
Since the concentration of OH- ions in the solution is twice the concentration of Ba(OH)₂, we can use the following equation to calculate the hydroxide ion concentration:
[OH-] = 2 x Molarity of Ba(OH)₂ = 2 x 0.01786 M = 0.0357 M
Now, we can use the equation for the ion product constant of water to calculate the hydronium ion concentration:
Kw = [H₃3O⁺][OH⁻] = 1.0 x 10⁻¹⁴
[H₃O⁺] = Kw / [OH⁻] = 1.0 x 10⁻¹⁴ / 0.0357 = 2.801 x 10⁻¹³ M
Finally, we can calculate the pH of the solution using the equation:
pH = -log[H₃O⁺] = -log(2.801 x 10⁻¹³) = 12.552
Therefore, the pH of the solution is 12.6 (rounded to one decimal place).
Learn more about molarity on:
https://brainly.com/question/17138838
#SPJ11
A 0.598 g sample of a green metal carbonate, containing unknown metal M, was heated to give the metal oxide and 0.222 g of CO2 (g) according to the reaction below. MCO3(s) + MO(s) + CO2(g) What is the metal M? Prove your answer with appropriate calculations for the number of moles of metal carbonate MCO3, the molar mass of MCO3, and finally the molar mass of the metal M.
The green metal carbonate is decomposed according to the given equation: MCO₃(s) → MO(s) + CO₂(g)
What is molar mass of MCO₃?
The number of moles of CO₂(g) produced can be used to determine the number of moles of the green metal carbonate (MCO₃) that decomposed.0.222 g of CO₂ (g) represents 1 mol of CO₂ (g), since its molar mass is 44 g/mol.
Therefore,1 mol of MCO₃ will produce 1 mol of CO₂ (g) in the reaction. So, 0.222 g of CO₂ (g) corresponds to 1 mol of MCO₃.
Hence, the number of moles of MCO₃ is:
moles of MCO₃= mass/Molar
mass= 0.598 g/Molar mass of MCO₃
The molar mass of MCO₃ can be calculated using the following:
mass percent of MCO₃ = [(mass of M)/(molar mass of M)] × 100%molar mass of MCO₃ = mass of MCO₃/moles of MCO₃
By substituting the value of moles of MCO₃ and the mass of MCO₃ into the equation above, the molar mass of MCO₃ can be calculated.
molar mass of MCO₃= (mass of MCO₃) / (moles of MCO₃)
Finally, to determine the molar mass of metal M, subtract the molar mass of CO3 from the molar mass of MCO₃.
MCO₃ = 12.011 + 3(15.999) + M(55.845)
= 181.76 + 55.845MM
= 55.845 - 60.01MM
= -4.165
The molar mass of the metal M is 4.165 g/mol.
To summarize, the metal M is sodium (Na) and its molar mass is 4.165 g/mol.
To know more about molar mass:
brainly.com/question/23058220
#SPJ11
draw the structure for chloric acid, hclo3. optimize formal charges.
The structure of chloric acid, HClO3, consists of a chlorine atom bonded to three oxygen atoms, with two of the oxygen atoms carrying a single negative charge. The formal charges of the atoms are optimized to achieve a neutral overall charge.
Optimizing the formal charges in the structure of chloric acid, HClO3, involves adjusting the distribution of electrons to achieve the most stable configuration while ensuring the overall charge of the molecule is neutral. This is important because it affects the molecule's reactivity and properties, including its acidity and ability to form bonds with another molecule.
O
|
H O
| ||
H -- O -- Cl -- O
| |
H O
|
H
learn more about chloric acid here:
https://brainly.com/question/3520712
#SPJ4