elements from group 2a form insoluble precipitates with carbonate and chromate anions. true false

Answers

Answer 1

True. Elements from Group 2A, also known as alkaline earth metals, form insoluble precipitates with carbonate and chromate anions.

Group 2A elements include beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). When these elements react with carbonate (CO3^2-) or chromate (CrO4^2-) anions, they produce insoluble precipitates. For example, when calcium (Ca) reacts with carbonate, it forms calcium carbonate (CaCO3), which is insoluble in water. Similarly, when barium (Ba) reacts with chromate, it forms barium chromate (BaCrO4), which is also insoluble.

The insolubility of these precipitates is due to the strong ionic bonds formed between the cations and anions. This results in a high lattice energy that prevents the dissolution of the precipitate in water. In general, the solubility of ionic compounds decreases as the charges of the ions increase and their size decreases. Group 2A elements tend to form insoluble precipitates with anions such as carbonate and chromate due to these factors.

Know more about Alkaline Earth Metals here:

https://brainly.com/question/12835232

#SPJ11


Related Questions

If a car can accelerate at 7.5 mi/hr/s, what would be its final speed after 5.0 seconds if its starting speed were 50 mi/hr?

Answers

Final speed after 5.0 seconds if its starting speed were 50 mi/hr is 87.5 mi/hr.

What is acceleration?

Acceleration is a vector quantity, meaning it has both a magnitude (or size) and a direction. The magnitude of acceleration is measured in units of meters per second squared (m/s²) or feet per second squared (ft/s²). The direction of acceleration is the direction in which the velocity of an object is changing.

There are different types of acceleration:

Positive acceleration refers to an increase in velocity, for example, when an object speeds up.

Negative acceleration or deceleration refers to a decrease in velocity, for example, when an object slows down.

Constant acceleration refers to when the rate of change of velocity is constant, for example, when an object is falling freely under the influence of gravity.

Zero acceleration refers to when an object is moving at a constant velocity, for example, when an object is moving in a straight line at a constant speed.

To calculate the final speed of a car that can accelerate at 7.5 mi/hr/s, we can use the equation:

final speed = initial speed + acceleration x time

In this case, the initial speed is 50 mi/hr, the acceleration is 7.5 mi/hr/s, and the time is 5.0 seconds.

So, the final speed would be:

50 mi/hr + (7.5 mi/hr/s x 5.0 s) = 50 mi/hr + 37.5 mi/hr = 87.5 mi/hr

Therefore, the final speed of the car after 5.0 seconds would be 87.5 mi/hr.

To know more about speed visit:

https://brainly.com/question/13263542

#SPJ1

Calcium,+ water yields calcium hydroxide+ hydrogen Complete lonic:Ca+2HeO?Ca ?

Answers

The complete ionic and balanced equation of displacement reaction will be - Ca + 2H20 – Ca(OH)2 + H2

In the given equation Calcium and Water yield together to form Calcium Hydroxide and Hydrogen. The reaction which takes place between calcium and water is the example of displacement reaction. In the displacement reaction in the given equation calcium is displaced by hydrogen from the water so to form Calcium Hydroxide.

In a displacement reaction atoms are displaced by another atom in any given molecule. Here the more reactive element displaces the less reactive element. Similar concept is used in the above equation where Calcium takes hydrogen with itself as it is more reactive in nature and forms a new compound of Calcium Hydroxide and Hydrogen releases.

Learn more about displacement reaction here:

https://brainly.com/question/29307794

#SPJ4

Which has the highest Zeff for its valence electrons?

F
Li
OC
Na

Answers

The highest zeff , effective nuclear charge for its valence electron from the give option is the F with the value of 5.2.

The Zeff can be calculated by the following formula :

Zeff = Z - s

where ,

Z is the atomic number

s is the shielding effect

F = 9 - (0.35 × 6 + 0.85 × 2 )

F = 5.2 for its valence electrons.

Li = 3 - 1.7

    = 1.3

O = 8 - ( 2 × 0.85 + 5 × 0.35 )

   = 4.5

C = 6 - (2 × 0.85 + 3 × 0.35)

   = 3.25

Na = 11 - ( 2 × 1 ) + (  8 × 0.85 )

Na = 2.20

To learn more about Zeff here

https://brainly.com/question/2005778

#SPJ4

Calculate the percent yield of H2 of a reaction that produces 0.50 moles of H2 from 45 grams of HCl and excess Al (aluminum) in the reaction below (which is not balanced):
Al + HCI = AlCl2 + H2

Answers

Answer:

Balanced equation:

2 moles of Al react with 6 moles of HCl. 2 moles of AlCl₃ and 3 moles of H₂ are produced.

The answer is C.

What mathematical tool do we use to determine the ratio of elements in a compound?

Answers

The mathematical tool used to determine the ratio of elements in a compound is called stoichiometry.

 

Stoichiometry is a tool that uses the balanced chemical equation of the reaction to calculate the ratio of elements in a compound. Stoichiometry is based on the concept of the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products. By using the balanced chemical equation, we can calculate the ratio of elements in a compound using a set of mathematical calculations called stoichiometric calculations. These calculations involve using the balanced chemical equation and the molar masses of the elements to determine the number of moles of each element in the compound. This information can then be used to determine the ratio of elements in the compound.

Learn more about Stoichiometry here: brainly.com/question/26387374

#SPJ4

Gemtone called rubie are made from an aluminium compound with the
formula Al₂O₃. The chemical ymbol for aluminium i Al. Give the name of the element that i combined with aluminium in thi compound

Answers

Aluminum oxide has a chemical formula of Al2O3.

A white, odorless powder known as aluminum oxide. Insoluble in water. The preparation process affects the properties (both physical and chemical); various preparation techniques result in various crystalline changes. The variation created at really high temperatures is chemically quite inert. Technical grade alumina is mostly made of alpha-Alumina. Natural aluminum oxide is corundum. Aluminum oxide comes in an impure crystalline version called Emery. (NIOSH, 2022).

an aluminum oxide that can be found in nature as different minerals such as bauxite, corundum, etc. It is employed in the production of dental cement, and refractories, and as a catalyst, desiccating agent, and adsorbent.

Know more about Aluminum oxide at:

https://brainly.com/question/11251774

#SPJ4

How many sigma bonds and pi bonds does this molecule have?

(CH3)2CCHCH2CCCOOH

Answers

The sigma bonds and pi bonds does the given  molecule have  is :

(CH₃)₂CCHCH₂CCCOOH , 19 sigma bond and 4 pi bond.

The given molecule given below :

(CH₃)₂CCHCH₂CCCOOH

     H         H   H               O

      |           |     |                 ||

H₂ - C - C = C - C - C ≡ C - C - O - H

            |             |

     H - C - H      H

            |

           H

The single bond in the molecule represent the one sigma bond . the double bond in the molecule represent the one sigma bond and the one pi bond. The triple bond in the molecule represent the one sigma bond and the two pi bond.

To learn more about bond here

https://brainly.com/question/14018074

#SPJ4

 

The Milky Way galaxy (pictured above) is an example of a(n) ____ galaxy. At the center of the galaxy is a galactic bulge that is around 20,000 light years long. In the very center of the galaxy is a massive ____ that is 4 million times the mass of the sun and has a huge gravitational pull.

A. Spiral, Supernova
B. Spiral, Black Hole
C. Elliptical, Supernova
D. Elliptical, Black Hole​

Answers

A. Spiral, Black Hole

The Milky Way galaxy is an example of a spiral galaxy. This is characterized by a disk with spiral arms, a central bulge, and a dark matter halo. The center of the Milky Way galaxy is a galactic bulge that is around 20,000 light years long.

In the very center of the galaxy, there is a massive black hole that is 4 million times the mass of the sun and has a huge gravitational pull. This massive object, known as a supermassive black hole, is a key feature of many spiral galaxies and is thought to play an important role in the dynamics and evolution of these galaxies.

Please let me know if you can solve any of these!

Need help!!

Answers

A mole ratio is the ratio between the amounts in moles of any two compounds involved in a balanced chemical reaction

What is salt formation equation?

The neutralisation of sodium hydroxide, NaOH, a base, with hydrogen chloride, HCl, an acid, produces sodium chloride, NaCl, and water, H2O: HCl+NaOH → NaCl+H2O.

Salt, in chemistry, substance produced by the reaction of an acid with a base. A salt consists of the positive ion (cation) of a base and the negative ion (anion) of an acid. The reaction between an acid and a base is called a neutralization reaction

.

Basic or Alkali Salt – The salt formed by the partial neutralization of a strong base by a weak acid is known as a basic salt. They hydrolyze to form a basic solution. It is because when hydrolysis of basic salt takes place, the conjugate base of the weak acid is formed in the solution.

To learn more about salt refers to;

https://brainly.com/question/24897763

#SPJ1

Write an adventure story of a spacecraft that has been launched to study the dwarf planet ceres. What would be a good story?

Answers

Once upon a time, there was a spacecraft named "Dawn" that was launched on a mission to study the dwarf planet Ceres. The spacecraft was equipped with state-of-the-art technology and a team of highly skilled scientists and engineers were aboard to control and monitor the mission.

As Dawn approached Ceres, the team was amazed at the vast, barren landscape that stretched out before them. They couldn't wait to start collecting data and analyzing the planet's surface. However, soon after they arrived, they encountered a problem. The spacecraft's landing gear malfunctioned and they were unable to land on the surface.

The team quickly came up with a plan B and decided to study Ceres from orbit. They began to collect data and take pictures of the planet's surface. They were shocked to find that Ceres had a surprisingly varied landscape, with towering mountains, deep craters, and mysterious bright spots.

As the mission continued, the team discovered that Ceres had a subsurface ocean beneath its icy crust. The team was thrilled at this discovery and knew that it would greatly contribute to the understanding of our solar system.

However, just as they were about to wrap up their studies, the team received a distress signal from a nearby spacecraft that was in trouble. Without hesitation, the team of Dawn set course to investigate and assist.

As they neared the other spacecraft, they saw that it was under attack by a group of rogue asteroids. The team of Dawn quickly came up with a plan and using their advanced technology, they were able to defend the other spacecraft and destroy the asteroids.

The other spacecraft, grateful for the help, thanked the team of Dawn and they continued on their journey. The team of Dawn, proud of their bravery and the success of their mission, returned to Earth with a wealth of new data and knowledge about Ceres and the Solar System.

The Dawn spacecraft mission was a great success and it helped scientists understand more about the dwarf planet Ceres, and it also demonstrated the courage, resourcefulness, and the sense of camaraderie of the team.

The purpose of the best-fit line on an experimental scatterplot is to Choose... The best-fit line allows us to Choose...

Answers

The best-fit line of an experimental scatterplot is used to identify any linear patterns in the scattered data.

A best fit line serves what purpose?

A line of best fit is a straight line that minimizes the distance between it and certain data. The line of best fit is used to represent a connection in a scatter plot with several data points. Regression analysis' byproduct serves as a tool for predicting indicators and price fluctuations.

What is the scatter plot's best-fit line?

A scatter plot's data is most accurately represented by a straight line known as the line of best fit. It is possible for this line to pass through some, all, or none of the points.

To learn more about best fit line refers to:

brainly.com/question/23957040

#SPJ4

What is the number of nitrogen molecules that reacted with excess hydrogen to make 2 x 10^10 molecules of ammonia?

Answers

Stoichiometry and the mole concept state that a reaction between 1 x 1010 molecules and extra hydrogen produced 2 x 1010 molecules of ammonia.

What does stoichiometry mean?

A chemical reaction's stoichiometry involves figuring out the ratios of its constituent elements or molecules. The underlying laws of the associated relationships are the law of mass preservation and the law on combining weights & volumes.

To determine the amounts of different compounds contained in the sample, stoichiometry is employed in quantitative analysis.

The balance of chemical equations requires it.

In the example provided, since 1 molecule of nitrogen creates 2 molecules of ammonia, 2 x 1010 molecules o ammonia will be created when 2 x 10101/2=1 molecule.

As a result, 1 x 1010 molecules formed 2 x 1010 molecules of ammonia when they were combined with extra hydrogen.

To know more about stoichiometry visit:

https://brainly.com/question/30215297

#SPJ4

Which of the physical states of water contains particles with the highest kinetic energy?A. WaterB. Melting IceC. SteamD. Ice

Answers

Option - C : Steam is the physical states of water contains particles with the highest kinetic energy. Because water in a gaseous form, has its particles moving around the most. Therefore, having the highest kinetic energy .

Kinetic energy is the energy that a moving item possesses. An item can only be accelerated through the application of a force. Applying force requires effort on our part. Following completion of the work, energy is transferred to the object, which then moves at a new, constant speed. Kinetic energy is the force that drives motion, and it may be observed in the motion of objects and subatomic particles. Every particle and moving object contains kinetic energy. Walking, a baseball flying through the air, food falling from a table, and a charged particle in an electric field are some examples of kinetic energy in action. The power is the energy , an object in motion possesses.

The word "kinetic" derives from the Greek "kinesis," which means motion.

For such more questions on Kinetic energy:

brainly.com/question/26472013

#SPJ4

H2o has a delta. Hvap = 40. 7 kj/mol. What is the quantity of heat that is released when 27. 9 g of h2o condenses?.

Answers

Quantity of heat released = -63.1 kJ

How to calculate 27.9 g of h2o condenses?.

Given:

Enthalpy of vaporization of water, ΔHvap = 40.7 kJ/mol

Mass of water, m = 27.9 g

To determine:

The amount of heat (Q) released

The reaction is: H2O(g) ↔ H2O(l)

The amount of heat evolved during condensation which involves a phase transition from vapor to liquid is given as:

Q=n*Delta H vape

n = moles of water

Since this is a condensation process: ΔHcond = -ΔHvap

Q=27.9g/18g mol * -40.7 k j/mol=63.1 k j

To learn more about quantity of heat refers to;

https://brainly.com/question/4353541

#SPJ4

Click on the Bloomberg Terminal screen to view data in the GLCO function. Which metal had the highest price movement?
O Aluminum
O Nickel
O Iron
O Gold

Answers

Gold metal had the highest price movement when viewed in glco function.

During economic recession , investments in gold has increased unexpectedly, which resullted in the highest price movement of gold.

Gold is the most ductile and malleable element on our planet. It is a great metal for jewellery because it never tarnishes.

The color and luster of gold are what make this metal so attractive. Gold is found as the free metal and in tellurides. It is widely distributed and almost always associated with pyrite or quartz.  

Gold is a good conductor of electricity and heat. It is not affected by exposure to air or to most reagents. It is inert and a good reflector of infrared radiation. Gold is usually alloyed to increase its strength.

To know more about gold here

https://brainly.com/question/18044463

#SPJ4

Maltose is a disaccharide formed by the formation of _______ bond between glucose and ________.

Answers

Maltose is a disaccharide formed by the formation of alpha 1,4glycosidic bond between glucose and alpha D glucose unit

What are Disaccharides?

A disaccharide is a type of carbohydrate that is created by combining two units of glucose. Succrose, maltose, and lactose are the three most prevalent kinds of disaccharide. The other disaccharides are lactulose, trehalose, and cellobiose, which are less well-known. Dehydration reactions are those that occur when one water molecule is eliminated by combining two monosaccharides, resulting in the formation of a molecule of a disaccharide.

The common disaccharides are sucrose, lactose, and maltose. Maltose

Two alpha D glucose units make up the disaccharide maltose, usually referred to as malt. An alpha 1,4 glycosidic linkage connects the two glucose units. The enzymes maltase and isomaltase break down the molecules of maltose into two glucose molecules in the human small intestine mucosa, which are then absorbed by the body. After cellulose, starch is the carbohydrate that is most prevalent in plant cells.

Formula --C12H22O11

Used extensively in the manufacturing of alcohol.Dental caries can be brought on by free maltose as well as maltose produced in the mouth as a result of starch digestion.The small intestine contains the enzymes maltase and isomaltase, which break down maltose into two glucose units that are then absorbed. Our bodies have the ability to immediately absorb maltose, which can then be broken down into a glucose unit to produce energy.The high glycemic index of maltose causes it to raise blood sugar levels.

To know  more about Disaccharides,Refer to:

https://brainly.com/question/12921453

#SPJ4

How many grams of phosphoric acid are formed from 36.4 grams of calcium phosphate?

Answers

Answer: Calcium phosphate (Ca3(PO4)2) and phosphoric acid (H3PO4) are two different compounds.

Explanation: In order to determine how many grams of phosphoric acid are formed from 36.4 grams of calcium phosphate, we would need to know the reaction taking place and the stoichiometry of that reaction. Without that information, it is impossible to determine how many grams of phosphoric acid are formed.

Answer:

calcium phosphate (ca3(po4)2) and phosphoric acid(h3po4)

In which type of soil where water drains too rapidly and dry out quickly?

Answers

The type of the soil where the water drains too rapidly and it dry our quickly is the sandy soil. The sandy soil has large space between the particles for passing out water through the soil.

The soil that has the large space between the  particles , so that the water can pass out quickly and the soil dry out quickly. The sandy soil is has the rough texture. . The sandy soil drains out quickly as compared to the other soil. The sandy soil is very good for the plants as it has the good drainage.

Thus , the soil that drains out too rapidly and dry out quickly is the sandy soil.

To learn more about soil here

https://brainly.com/question/21966736

#SPJ4

How many grams of ammonia are produced when 28 grams of nitrogen gas are reacted with excess hydrogen gas?

Answers

Answer: 2.0g NH3

Explanation:

First we have to make a balanced equation (should be: N2 + 3H2 -> 2NH3) then we convert the N2 (Nitrogen gas) to moles by finding the molar mass of N2 (28.02g) divide that and multiply by the number of moles of Ammonia (NH3). This would give us 2.0g of NH3. Hope that helps!

2.0g NH3 is the answer :)

If anyone see this could you help me with my chemistry homework, please?

43. The student hopes the samples are gold, which has a density of 19.3 g/mL. A
local geologist suggest the samples might be pyrite, which is a mineral with a density
of 5.01 g/mL. What is the identity of the unknown sample?

44.Calculate the percent error of each sample. Use the density value given in question
above.
14.3-
TA

45.Was the data collected by the student accurate? Explain your answer.

Answers

Therefore, since the density of the samples are closer to the density of pyrite (5.01 g/cm³) we conclude that the samples are more like to be pyrite.

What is pyrite?pyrite, also called iron pyrite or fool’s gold, a naturally occurring iron disulfide mineral. The name comes from the Greek word pyr, “fire,” because pyrite emits sparks when struck by metal. Pyrite is called fool’s gold; to the novice its colour is deceptively similar to that of a gold nugget. Nodules of pyrite have been found in prehistoric burial mounds, which suggests their use as a means of producing fire.Wheel-lock guns, in which a spring-driven serrated wheel rotated against a piece of pyrite, were used before development of the flintlock. Pure pyrite (FeS2) contains 46.67 percent iron and 53.33 percent sulfur by weight. Its crystals display isometric symmetry. For detailed physical properties, see sulfide mineral.

To learn more about sulfide mineral refer to:

https://brainly.com/question/5099156

#SPJ1

PLEASE HELP AS FAST AS POSSIBLE
Draw a picture of how the chromatography worked. Explain your picture using the following terms: stationary phase,
mobile phase, and intermolecular forces.

Answers

Process of separating components of mixture is called chromatography . To get the process started, mixture is dissolved in a substance called mobile phase, which carries it through a second substance which is stationary phase.

What are stationary phase, mobile phase and intermolecular forces?

Stationary phase is the phase that doesn't move and the mobile phase is the phase that moves. Mobile phase moves through the stationary phase picking up the compounds that is to be tested.

There are intermolecular forces, such as hydrogen-bonding and dipole-dipole interactions in chromatography, that helps retain the analyte to stationary phase of the column. The stronger is the intermolecular forces, stronger and longer is the compound is retained in column.

To know more about chromatography, refer

https://brainly.com/question/11960023

#SPJ1

the woman is using colorful letters to hold the drawing to the refrigerator. What type of force is pulling the letters toward refrigerator

Answers

Answer:

She is using magnetic force

Explanation:

What is the mass in grams of 6.02 x10 23 carbon atoms?

Answers

6.02 x10^23 carbon atoms have a mass of 12.04 grams.

An element's atomic mass is the average mass of its atoms measured in atomic mass units (amu, also known as daltons, D). The atomic mass is a weighted average of all the isotopes of that element, calculated by multiplying the mass of each isotope by its abundance.

The atomic mass of carbon is 12.0107 grams/mol. Since 1 mole of carbon atoms is equal to 6.02 x 10^23 atoms, the mass of 6.02 x 10^23 atoms can be calculated by multiplying the atomic mass of carbon by 6.02 x 10^23. 12.0107 grams/mol x 6.02 x 10^23 = 12.04 grams. This is the mass of 6.02 x 10^23 carbon atoms.

For more questions like Mass the link below:

https://brainly.com/question/30193521

#SPJ4

Decribe Niel Bohr' model of the atom. Tell what part of the atom are included in hi model and how they are arranged. (2 point)

Answers

Neil Bohr's model of an atom as a central nucleus which contain protons and neutrons with the orbits in an circular orbit  at specific distances and the electrons in an atom are arranged in shells that surrounds the nucleus.

Bohr model of the atom was proposed by Neil Bohr in 1915. It came into existence with the modification of Rutherford’s model of an atom. Rutherford’s model introduced the nuclear model of an atom, in which he explained that a nucleus which is (positively charged) surrounded by the negatively charged electrons. Electrons in an atom are arranged in shells which surround the nucleus, with each successive shell being farther away from the nucleus. Subshells consist of one or more atomic orbitals and electron shells consist of one or more subshells.

To know more about nucleus here

https://brainly.com/question/23366064

#SPJ4

When you lick a popsicle, how does the thermal energy travel between the popsicle and your tongue? What kind of heat transfer is that?

Answers

I think its Thermal Energy

Compounds have no charge. True or False

Answers

Answer:

False.

Compounds can have a charge. A compound is a substance made up of two or more elements that are chemically bonded together. The charge on a compound depends on the number of electrons in the outermost energy level, or valence electrons, of the atoms that make up the compound. If the compound has an equal number of protons and electrons, it will have no charge, and is called a neutral compound.

However, if there is an unequal number of protons and electrons, the compound will have a charge and is called an ionic compound. For example, the compound sodium chloride, NaCl, is made up of positively charged sodium ions and negatively charged chloride ions, and therefore has an overall charge of neutral.

To Know more about Compounds

https://brainly.com/question/26487468

False, compounds can have a charge

which of the following volumes is the smallest?
A) one hectoliter
B) one deciliter
C) one milliliter
D) one liter

Answers

Answer:

one milliliter

Explanation:

In the metric system, the prefix m stands for “milli”, which means “1/1,000 of”. So 1 ml (milliliter) is only 1/1,000 of 1 l (liter). Therefore, 1 ml is smaller than 1 l.

Thompson changed out the
metal and still consistently
observed the same cathode ray.
What did this observation mean
for atomic theory?
A. The atomic is a small hard sphere.
B. The atom is indivisible.
C. The atom contained something small and
negative.
D. The atom is mostly empty space.

Answers

Thompson's model concluded that the atom contained something small and negative. The correct option to this question is C.

What is Thompson's model?

Thomson's description of the atomic model is one of many scientific models of the atom. Created by J.J. Thomson in 1904, shortly after the electron was discovered. However, the atomic nucleus had not yet been discovered at that time. So he proposed a model based on the known properties available at the time. Known properties are:

Atoms are neutrally charged

Inside an atom are negatively charged particles called electrons. According to the assumptions of Thomson's atomic model, an atom resembles a positively charged sphere with electrons (negatively charged particles) inside.

For more information on Thompson's model kindly visit to

https://brainly.com/question/14246826

#SPJ1

Calculate the minimum number of grams of propane. More info for the question in attached photo.

Answers

The minimum number of grams of propane for the given question is calculated as 55.39 g.

What is propane?

Propane is a three-carbon alkane with molecular formula of C₃H₈. It is a gas at a standard temperature and pressure but is compressible to a transportable liquid.

Given, mass of ice = mass of water = 4.10 kg = 4100 g

and temperature of ice = -16 °C ; Temperature of water = 75.5 °C

Heat required to change  ice to water under the specified conditions is:-

As we know, q = q(-16 C to 0°C) + q(fusion) + q (0 C to 75.5 °C)

So q  = m*c(ice)*ΔT(ice) + m*ΔHfusion + m*c(water)*ΔT(water)

 = 4100[2.03(0-(-16)) + 334 + 4.18(75.5-0)]

q = 2796 kJ

As the enthalpy change for combustion of propane is -2220 kJ/mol

Therefore, now the number of moles of propane corresponding to required energy of 2796 kJ ;

= 1 mole * 2796 kJ/2220 kJ

= 1.259 moles of propane

As we know molar mass of propane = 44 g/mol

So, mass of propane required = 1.259 moles * 44 g/mol

Hence we get, mass of propane required  = 55.39 g

To know more about propane, refer

https://brainly.com/question/1458180

#SPJ1

When 50.2g of magnesium is combined with 40.8g of oxygen: 1. How many grams of magnesium oxide should be produced.

Answers

When 50.2g of magnesium is combined with 40.8g of oxygen, 91 grams of magnesium oxide should be produced.

What is law of conservation of mass?

The law of conservation of mass states that the total mass of a closed system remains constant regardless of the chemical or physical changes that take place within it.

This law suggests that the amount of reactants of a chemical reaction must equate the amount of products of that reaction.

According to this question, magnesium reacts with oxygen gas to produce magnesium oxide. If 50.2g of magnesium reacts with 40.8g of oxygen, then;

50.2 + 40.8 = 91 grams of magnesium oxide will be produced.

Learn more about law of conservation of mass at: https://brainly.com/question/13383562

#SPJ1

Other Questions
What event would be considered the final straw and led to America entering WWII? Which sentence best describes the above theme of the essay?A. At that age I was not squeamish about killing animals, but I had never shot an elephant and never wanted to.B. He becomes a sort of hollow, posing dummy, the conventionalized figure of the sahib.C. I often wondered whether any of the others grasped that I had done it solely to avoid looking a fool.D. I perceived in this moment that when the white man turns tyrant it is his own freedom he destroys. Who would MOST LIKELY to agree with the following statement? What impact did Emperor Asoka's conversion to Buddhism have on India in the 3rd century BCE? I need help with this algebra problem An estuary that normally shelters juvenile fish and other organisms has become filled with silt and pollution. How will this affect the age distribution of the populations? Ricky spent $44 total on a baseball mitt and a ball. If the mitt cost$2 more than 5 times the cost of the ball, find the cost of eachitem. Highlight the verbs in this passage thatdemonstrate parallel structure.He has plundered our seas, ravaged ourCoasts, burnt our towns, and destroyed thelives of our people.from the Declaration of Independenceby Thomas Jefferson To provide better transportation, the nation built many roads and ___. Why is biodiversity important? (DO NOT ANSWER IF YOU DONT KNOW) What are some examples of slavery in the 21st century (addictions to substances, addictive behaviours, consumerism, etc.) and what would the people enslaved today need in order to be liberated (freed)? help asap! Which of the following statement is true?Animals cannot be changed into petrified fossil.The process of petrifaction is always completed.Replacing original materials by minerals creates petrified fossils.Petrified wood can only be found closer to the equator. When you have a job, what will be the first expensive item youll be saving for? How much do you think youll need to save for it? Write a 7 sentence response. I = 160.67, P = 900, t = 12Answer step by step please:) Choose the best answer. If necessary, use the paper you were given.QuestionAt 8 a.m., the temperature in a city was -8 degrees Celsius (C). At noon on the same day, the temperature inthe city was 2C. What was the difference in temperature, in degrees Celsius, from 8 a.m. to noon in the city?-6C2C4C10C In the isotope Carbon-14, what does the number 14 represent? What is the best interpertation of the figurative language in this line? I am ten million bricks of unshakable faith Can someone please help Ill mark you the brainiest.. 47,258 redondear el decimal hasta la centsima ms prxima A phone plan costs $10 per month, plus $0.03 per text message. John wants his phone bill to be less than $40, before taxes. What is themaximum number of text messages John can send?A.) 333 B.) 999C.) 1,333D.) 1,666