Emma spent $60. 20 on 5 dozen bagels and a gallon of iced tea. The price of the gallon of iced tea was $5. 25. The following equation can be used to find d, the price of each dozen of bagels. 5d + 5. 25 = 60. 2 What was the price of each dozen of bagels?

Answers

Answer 1

Let's put the value of d into the equation and see if it works.5d + 5.25 = 60.2 5(10.99) + 5.25 = 60.2 54.95 + 5.25 = 60.2 60.2 = 60.2It works, and therefore, the answer is correct.

Emma spent $60.20 on 5 dozen bagels and a gallon of iced tea. The price of the gallon of iced tea was $5.25. The following equation can be used to find d, the price of each dozen of bagels. 5d + 5.25 = 60.2

What was the price of each dozen of bagels?

Solution:To find the price of a dozen bagels, we have to isolate the variable d by performing the same operation on both sides of the equation.5d + 5.25 = 60.2 - 5.25 5d = 54.95 d = 54.95/5 d = 10.99Therefore, the price of each dozen of bagels was $10.99.Check:Let's put the value of d into the equation and see if it works.5d + 5.25 = 60.2 5(10.99) + 5.25 = 60.2 54.95 + 5.25 = 60.2 60.2 = 60.2It works, and therefore, the answer is correct.

Learn more about Dozen here,

https://brainly.com/question/27952946

#SPJ11


Related Questions

can someone solve for x?
x^3 = -81

Answers

The value of x in the expression is,

⇒ x = - 3

Since, Mathematical expression is defined as the collection of the numbers variables and functions by using operations like addition, subtraction, multiplication, and division.

We have to given that';

Expression is,

⇒ x³ = - 81

Now, We can simplify as;

⇒ x³ = - 81

⇒ x³ = - 3³

⇒ x = - 3

Thus, The value of x in the expression is,

⇒ x = - 3

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ1

Dalvin conducted a scientific experiment. For a certain time, the temperature of a compound rose 1 3/4 degrees every 2 1/3 hours. How much did the temperature of the compound rise in one hour? Enter your answer as a whole number, proper fraction, or mixed number in simplest form. ​

Answers

The temperature of the compound increased by 3/4 of a degree in one hour. Conversion of 2 1/3 hours into a mixed number: 2 1/3 = 7/3 hours.

To find the rate of increase in temperature per hour, we will convert 1 hour into 3/7 hours as follows;

1 hour = 3/7 hours.

Thus, the temperature of the compound rose by 1 3/4 degrees every 2 1/3 hours or 7/3 hours:

= (1 3/4) / (7/3)

= (7/4) x (3/7)

= 21/28

= 3/4 of a degree per hour.

We are given that for a certain time, the temperature of a compound increased by 1 3/4 degrees every 2 1/3 hours. We are required to find how much the temperature of the compound rose in one hour. Let's begin by converting 2 1/3 hours into a mixed number.2 1/3 = 7/3 hours.

Now, to find the rate of increase in temperature per hour, we will convert 1 hour into 3/7 hours. Thus,

1 hour = 3/7 hours.

We can now find the temperature of the compound that rose per hour by dividing the temperature that rose in 7/3 hours by 7/3 hours and multiplying the result by 3/7. Let's substitute the temperature into the formula:

= (1 3/4) / (7/3)

= (7/4) x (3/7)

= 21/28

= 3/4 of a degree per hour.

Therefore, the temperature of the compound increased by 3/4 of a degree in one hour.

To know more about the mixed number, visit:

brainly.com/question/29176042

#SPJ11

The motion of a particle is given by x=Asin^3(wt). a) What is the amplitude of the particles's motion? b)What is the expression for the particle's velocity? c) What is the expression for the particle's acceleration?

Answers

The amplitude of the particle's motion is A.

The expression for the particle's velocity can be found by taking the time derivative of x with respect to t:

v = [tex]dx/dt = 3A(w sin(wt))^2[/tex] [tex]cos(wt)c)[/tex]

The expression for the particle's acceleration can be found by taking the time derivative of v with respect to t:

[tex]a = dv/dt = -3A(w^2 sin^2(wt) - 2w^2 sin^4(wt)) sin(wt) - 6A(w sin(wt))^3[/tex] [tex]cos(wt)[/tex]

a) The amplitude of the particle's motion is the maximum displacement from its equilibrium position, which can be found by taking the absolute value of the maximum value of x. In this case, the maximum value of x is A, so the amplitude of the particle's motion is A.

b) The expression for the particle's velocity can be found by taking the time derivative of x with respect to t:

v = [tex]dx/dt = 3A(w sin(wt))^2[/tex] [tex]cos(wt)c)[/tex] The expression for the particle's acceleration can be found by taking the time derivative of v with respect to t:

[tex]a = dv/dt = -3A(w^2 sin^2(wt) - 2w^2 sin^4(wt)) sin(wt) - 6A(w sin(wt))^3[/tex] [tex]cos(wt)[/tex]

Simplifying this expression gives:

[tex]a = -3Aw^2 sin(wt) [1 - 2sin^2(wt)] - 6Aw^3 sin^3(wt) cos(wt)[/tex]

For such more questions on acceleration

https://brainly.com/question/26408808

#SPJ11

The amplitude of the particle's motion is A, the expression for the particle's velocity is v = 3Awcos(wt) * w, and the expression for the particle's acceleration is a = -3Aw^2sin(wt).

These expressions describe the behavior of the particle in terms of its position, velocity, and acceleration as a function of time.

a) The amplitude of the particle's motion can be determined from the equation x = Asin^3(wt). In this equation, A represents the amplitude. Therefore, the amplitude of the particle's motion is A.

b) To find the expression for the particle's velocity, we need to differentiate the equation x = Asin^3(wt) with respect to time. Taking the derivative, we get:

v = d/dt (Asin^3(wt))

Using the chain rule and the derivative of sine function, we can simplify the expression as follows:

v = 3Awcos(wt) * w

Therefore, the expression for the particle's velocity is v = 3Awcos(wt) * w.

c) To find the expression for the particle's acceleration, we need to differentiate the velocity equation with respect to time. Taking the derivative, we get:

a = d/dt (3Awcos(wt) * w)

Using the chain rule and the derivative of cosine function, we can simplify the expression as follows:

a = -3Aw^2sin(wt)

Therefore, the expression for the particle's acceleration is a = -3Aw^2sin(wt).

To learn more about velocity, click here: https://brainly.com/question/10425898

#SPJ11

Evaluate the integral
∫10∫1ysin(x2) dxdy
by reversing the order of integration.
With order reversed,
∫ba∫dcsin(x2) dydx
where a= , b= , c= , and d= .
Evaluating the integral, ∫10∫1ysin(x2) dxdy=

Answers

Reversing the order of integration for the given double integral ∫10∫1ysin(x^2)[tex]dxdy[/tex] leads to the integral ∫1^0∫√y^−1y sin(x^2) dxdy. Evaluating this integral gives the value approximately equal to -0.225.

To reverse the order of integration, we need to visualize the region of integration in the x y -plane. The limits of x are from y to 1 and limits of y are from 0 to 1. So, the region of integration is a triangle with vertices at (1,0), (1,1), and (y, y) for y ranging from 0 to 1.

Now, to reverse the order of integration, we integrate with respect to x first, then y. So, the limits of x will be from √[tex]y^-1[/tex] to y , and limits of y will be from 1 to 0. Therefore, the new integral becomes ∫1^0∫√y^−1y sin(x^2) dxdy.

Evaluating this integral, we have ∫1^0∫√[tex]y^-1y sin(x^2)[/tex][tex]dxdy[/tex] = ∫1^0 [−1/2cos[tex](y^-(1/2))[/tex] + 1/2cos(y)[tex]] dy[/tex] ≈ -0.225. Therefore, the value of the given double integral is approximately -0.225.

Learn more about integral here:

https://brainly.com/question/31109342

#SPJ11

What is the probability that the mean salary of random sample of 100 workers is no more than $54,215?

Answers

Using the normal distribution calculator, the probability that the mean salary of random sample of 100 workers is no more than $54,215 is  0.5171 or 51.71%.

What is the probability?

Probability refers to the chance or likelihood that an expected event occurs out of many possible events.

Probability gives a value that lies between 0 and 1, depending on the degree of certainty.

Mean annual salary = $54,000

Standard deviation = $5,000

Sample size = 100 workers

Mean not above $54,215

Thus, the probability that the mean salary of random sample of 100 workers is no more than $54,215 is 0.5171.

Learn more about normal distribution probabilities at brainly.com/question/4079902.

#SPJ1

Complete Question:

The annual salary for a certain job has a normal distribution with a mean of $54,000 and a standard deviation of $5000. What is the probability that the mean salary of a random sample of 100 workers is no more than $54,215?

Let R be the region in the xy-plane bounded by the lines x + y = 2, x + y = 4, y − x = 3, y − x = 5. Use the change of variables u = y + x, v = y − x to set up (but do not evaluate) an iterated integral in terms of u and v that represents the integral below. Double integral sub R (y−x) e^ (y^ 2−x ^2) dA

Answers

The iterated integral in terms of u and v that represents the given integral is 1/2 times the integral over the region R in the uv-plane of (v) e^((u^2 - v^2)/4) dv du, where R is bounded by the lines u=3^5 and v=2^4.

We are given the region R in the xy-plane bounded by the lines x + y = 2, x + y = 4, y − x = 3, y − x = 5. We need to use the change of variables u = y + x, v = y − x to set up an iterated integral in terms of u and v that represents the integral of (y-x) e^(y^2-x^2) over R.

Using the given change of variables, we have:

x = (u - v)/2

y = (u + v)/2

The Jacobian of the transformation is given by:

|∂(x,y)/∂(u,v)| = |1/2 1/2| = 1/2

Using the change of variables, we can express the integral as:

∫∫(y-x)e^(y^2-x^2) dA = 1/2 ∫u=3^5 ∫v=2^4 (v) e^((u^2 - v^2)/4) dv du

Thus, the iterated integral in terms of u and v that represents the given integral is 1/2 times the integral over the region R in the uv-plane of (v) e^((u^2 - v^2)/4) dv du, where R is bounded by the lines u=3^5 and v=2^4.

Learn more about iterated integral here

https://brainly.com/question/30216057

#SPJ11

A unit vector normal to the surface 2x² – 2xy + yx at (2,4) is: a. 1/√5 ( i-2j) . b.1/√5 ( i+2j) c.1/√5 ( 2i+j) d. 1/√5 ( 2i-j)

Answers

The answer is (a) 1/√5 ( i-2j).

We can find the normal vector to the surface by computing the gradient of the surface and evaluating it at the given point.

The surface is given by the equation:

f(x, y) = 2x² - 2xy + yx

Taking the partial derivatives with respect to x and y:

fx = 4x - 2y

fy = x + 2

So the gradient vector is:

∇f(x, y) = (4x - 2y)i + (x + 2)j

Evaluating this at the point (2, 4):

∇f(2, 4) = (4(2) - 2(4))i + (2 + 2)j = 4i + 4j

To get a unit normal vector, we divide this by its magnitude:

|∇f(2, 4)| = √(4² + 4²) = 4√2

n = (4i + 4j)/[4√2] = 1/√2 (i + j)

To find a normal vector that is also a unit vector, we divide by its magnitude again:

|n| = √2

n/|n| = 1/√2 (i + j)

So the answer is (a) 1/√5 ( i-2j).

To know more about vector refer here:

https://brainly.com/question/29740341

#SPJ11

What is the age distribution of patients who make office visits to a doctor or nurse? The following table is based on information taken from a medical journal.Age group, years Under 15 15-24 25-44 45-64 65 and olderPercent of office visitors 10% 5% 25% 10% 50%Suppose you are a district manager of a health management organization (HMO) that is monitoring the office of a local doctor or nurse in general family practice. This morning the office you are monitoring has eight office visits on the schedule. What is the probability of the following?a. At least half the patients are under 15 years old.b. From 2 to 5 patients are 65 years old or older (include 2 and 5).

Answers

a. To calculate the probability that at least half the patients are under 15 years old, we need to find the probability of having 4 or more patients under 15 years old.

According to the table, the probability of a patient being under 15 years old is 10%, so the probability of having 4 or more patients under 15 years old can be calculated using the binomial distribution formula:

P(X >= 4) = 1 - P(X < 4) = 1 - (C(8,0)*0.1^0*0.9^8 + C(8,1)*0.1^1*0.9^7 + C(8,2)*0.1^2*0.9^6 + C(8,3)*0.1^3*0.9^5) = 1 - 0.9897 = 0.0103

Therefore, the probability of at least half the patients being under 15 years old is 0.0103 or about 1.03%.

b. To calculate the probability of having 2 to 5 patients who are 65 years old or older, we use the binomial distribution formula.

From the binomial distribution formula, probability of having exactly 2, 3, 4, or 5 patients who are 65 years old or older are found and then the probabilities are added up:

P(2 ≤ X ≤ 5) = P(X = 2) + P(X = 3) + P(X = 4) + P(X = 5)

= C(8,2)*0.5^2*0.5^6 + C(8,3)*0.5^3*0.5^5 + C(8,4)*0.5^4*0.5^4 + C(8,5)*0.5^5*0.5^3

= 0.1094 + 0.2734 + 0.2734 + 0.1367 = 0.7939

Therefore, the probability of having 2 to 5 patients who are 65 years old or older is 0.7939 or about 79.39%.

To know more about probability, visit:

https://brainly.com/question/30034780

#SPJ11

Question

Find the surface area of the prism. The surface area is

square feet

Answers

To find the surface area of a prism, we need to calculate the sum of the areas of all its faces.

For a general prism, the surface area can be found by adding the areas of the lateral faces and the base faces.

If we assume that the prism has a rectangular base, the surface area can be calculated using the following formula:

Surface Area = 2lw + 2lh + 2wh

Where:

l = length of the prism

w = width of the prism

h = height of the prism

the specific dimensions (length, width, and height) of the prism so that I can calculate the surface area for you.

Learn more about prism area here:

https://brainly.com/question/1297098

#SPJ11

(1) Given two complex numbers z,-r1(cosa + 1 sin a) and z2-r2(cos θ2 + sin θ(2), prove the following formula for the division of complex numbers without using the Quotient Theorem stated in the text equal to the square of the modulus.

Answers

The formula for the division of complex numbers is:

z1/z2 = [(r1 cos a - r2 cos θ2) + i(r1 sin a - r2 sin θ2)] / [r2^2 + r1r2(cos(a - θ2) + i sin(a - θ2))]

To divide two complex numbers, we need to multiply the numerator and denominator by the complex conjugate of the denominator. That is, we multiply z1 by r2(cos θ2 - i sin θ2) and z2 by r2(cos θ2 - i sin θ2). This gives us:

z1/z2 = [(r1/r2)cos a - cos θ2 + i((r1/r2)sin a - sin θ2)] / [(r2 cos θ2 - i sin θ2)(cos a + i sin a)]

Next, we simplify the denominator using the identity cos^2θ + sin^2θ = 1:

z1/z2 = [(r1/r2)cos a - cos θ2 + i((r1/r2)sin a - sin θ2)] / [r2(cos a cos θ2 + sin a sin θ2) + i(r2 sin a cos θ2 - r2 cos a sin θ2)]

Now, we multiply the numerator and denominator by the conjugate of the denominator:

z1/z2 = [(r1/r2)cos a - cos θ2 + i((r1/r2)sin a - sin θ2)] / [r2(cos a cos θ2 + sin a sin θ2) + i(r2 sin a cos θ2 - r2 cos a sin θ2)] * [r2(cos a cos θ2 + sin a sin θ2) - i(r2 sin a cos θ2 - r2 cos a sin θ2)] / [r2(cos a cos θ2 + sin a sin θ2) - i(r2 sin a cos θ2 - r2 cos a sin θ2)]After simplifying, we get:

z1/z2 = [(r1 cos a - r2 cos θ2) + i(r1 sin a - r2 sin θ2)] / [r2^2 + r1r2(cos(a - θ2) + i sin(a - θ2))].

For such more questions on Complex numbers:

https://brainly.com/question/29747482

#SPJ11

We have proved the formula for the division of complex numbers without using the Quotient Theorem, which states that:

z1/z2 = |z1|/|z2| * (cos (θ1 - θ2) + i sin (θ1 - θ2))

To prove the formula for the division of complex numbers without using the Quotient Theorem, we can use the polar form of complex numbers and some trigonometric identities.

Let z1 = r1(cos θ1 + i sin θ1) and z2 = r2(cos θ2 + i sin θ2) be two complex numbers in polar form.

Then, we can write the division of z1 by z2 as:

z1/z2 = r1(cos θ1 + i sin θ1) / r2(cos θ2 + i sin θ2)

Multiplying the numerator and denominator by the conjugate of z2, we get:

z1/z2 = r1(cos θ1 + i sin θ1) / r2(cos θ2 + i sin θ2) * r2(cos θ2 - i sin θ2) / r2(cos θ2 - i sin θ2)

Simplifying the numerator, we get:

z1/z2 = r1r2(cos θ1 cos θ2 + sin θ1 sin θ2 + i(sin θ1 cos θ2 - cos θ1 sin θ2))

Using the identities cos (θ1 - θ2) = cos θ1 cos θ2 + sin θ1 sin θ2 and sin (θ1 - θ2) = sin θ1 cos θ2 - cos θ1 sin θ2, we can write:

z1/z2 = r1r2(cos (θ1 - θ2) + i sin (θ1 - θ2))

Now, we can write z1/z2 in polar form as:

z1/z2 = |z1/z2| (cos φ + i sin φ)

where |z1/z2| = r1/r2 and φ = θ1 - θ2.

We can also see that the relation R does not have the comparability property, since for some complex numbers z1 and z2, it is not true that either z1 R z2 or z2 R z1. For example, if z1 = 1 + i and z2 = -1 - i, then z1 R z2 since |z1| < |z2|, but z2 does not R z1 since |z2| < |z1|. Therefore, R is not a total order on the set of complex numbers.

Know more about Quotient Theorem here:

https://brainly.com/question/29046143

#SPJ11

A triangular parcel of land has borders of lengths 60 meters, 70 meters, and 82 meters. Find the area of the parcel of land.

Answers

Answer:

The area of the triangular parcel of land is approximately 5039.55 square meters. To find the area of the triangular parcel of land, we can use Heron's formula.

Heron's formula states that the area of a triangle with sides of length a, b, and c is Area = √(s(s-a)(s-b)(s-c))
where s is the semiperimeter, defined as:
s = (a + b + c)/2
In this case, we have a = 60 meters, b = 70 meters, and c = 82 meters. So, we can first calculate the semiperimeter:
s = (60 + 70 + 82)/2 = 106
Then, we can use Heron's formula to find the area:
Area = √(106(106-60)(106-70)(106-82)) = √(106(46)(36)(24)) = √(25397184) ≈ 5039.55 square meters.

Learn more about Heron's formula here:

https://brainly.com/question/29184159

#SPJ11

Evaluasi integral garis F · dr, C di mana C diberikan oleh fungsi vektor r(t). f(x,y,z) = (x y^2)i xz(j) (y z)k, r(t)=t^2i t^3j-2tj, 0<=t<=2

Answers

The line integral evaluates to 1792/3. The integral was solved using the parametric equations of the given vector function and applying the line integral formula.

The line integral of F · dr over C, where C is given by the vector function r(t) = t²i + t³j - 2tj, 0 ≤ t ≤ 2, and F(x, y, z) = (xy²)i + xz(j) + (yz)k is to be evaluated.

To solve this, first, we need to parameterize the curve C by finding the values of r(t) at t = 0 and t = 2.

At t = 0, r(0) = (0)i + (0)j + (0)k = 0

At t = 2, r(2) = (4i) + (8j) - (2k)

Next, we need to calculate the line integral using the parameterization of the curve C.

∫ F · dr = ∫ [f(r(t))] · [r'(t) dt] from t=0 to t=2

where r'(t) is the derivative of r(t) with respect to t.

Substituting the given values of F and r(t), we get

∫ F · dr = ∫ [(t²)(t⁶)²i + (t²)(-2t)j + (t³)(-2t)(t²)k] · [2ti + 3t²j - 2j dt] from t=0 to t=2

On simplifying and integrating, we get

∫ F · dr = ∫ [(t¹⁰)i + (-4t³)j + (-2t⁵)k] · [2ti + 3t²j - 2j dt] from t=0 to t=2

∫ F · dr = ∫ [(2t¹¹) + (-12t⁵) + (-2t⁵)] dt from t=0 to t=2

∫ F · dr = [1/6 (2t¹²) - 2t⁶ - 1/3 (2t⁶)] from t=0 to t=2

∫ F · dr = [(2/3)(2¹²) - 2(2⁶) - (2/3)(2⁶)] - [0]

∫ F · dr = 2048/3 - 128 - 64/3

∫ F · dr = 1792/3

Therefore, the value of the line integral is 1792/3.

To know more about line integral:

https://brainly.com/question/29850528

#SPJ4

what is the probability of a goal given that wayne took the shot?

Answers

The probability of a goal given that Wayne took the shot would depend on various factors,

To determine the probability of a goal given that Wayne took the shot, we would need to know the success rate of Wayne's shots.

If we have that information, we can use it to calculate the conditional probability of a goal.

For example,

If we know that Wayne has a 20% success rate on his shots, then the probability of a goal given that Wayne took the shot would be 0.2 (or 20%).

The probability of a goal given that Wayne took the shot would depend on various factors, such as Wayne's skill level, the position he took the shot from, the opposition team's defense, the weather conditions, and many other factors.

If you have more information about these factors or any other relevant details, please provide them, and I will try my best to help you with the calculation.

However,

If we don't have any information on Wayne's success rate, it would be difficult to calculate the probability accurately.

For similar question on probability:

https://brainly.com/question/32004014

#SPJ11

evaluate the triple integral of f(e, 0, ¢) = sin o in spherical coordinates over the region 0 < 0 < 27, 0<¢<, 3

Answers

The triple integral of f(e, 0, ¢) = sin o in spherical coordinates over the region 0 < 0 < 27, 0<¢<, 3 is 54π. Spherical coordinates are a system of coordinates used to locate a point in 3-dimensional space.

To evaluate the triple integral of f(e, 0, ¢) = sin o in spherical coordinates over the region 0 < 0 < 27, 0<¢<, 3, we need to express the integral in terms of spherical coordinates and then evaluate it.

The triple integral in spherical coordinates is given by:

∫∫∫ f(e, 0, ¢)ρ²sin(φ) dρ dφ dθ

where ρ is the radial distance, φ is the polar angle, and θ is the azimuthal angle.

Substituting the given function and limits, we get:

∫∫∫ sin(φ)ρ²sin(φ) dρ dφ dθ

Integrating with respect to ρ from 0 to 3, we get:

∫∫ 1/3 [ρ²sin(φ)]dφ dθ

Integrating with respect to φ from 0 to π/2, we get:

∫ 1/3 [(3³) - (0³)] dθ

Simplifying the integral, we get:

∫ 27 dθ

Integrating with respect to θ from 0 to 2π, we get:

54π

Therefore, the triple integral of f(e, 0, ¢) = sin o in spherical coordinates over the region 0 < 0 < 27, 0<¢<, 3 is 54π.

To learn more about spherical coordinates : https://brainly.com/question/29555384

#SPJ11

the half-life of cesium-129 is 32.0 hours. how much time is required for the activity of a sample of cesium-129 to fall to 18.0 percent of its original value?

Answers

It would take approximately 71.5 hours for the activity of the sample of cesium-129 to fall to 18.0 percent of its original value.

To calculate the time required for the activity of a sample of cesium-129 to fall to 18.0 percent of its original value, we can use the formula for half-life:

N = [tex]N_{0} \frac{1}{2}^{\frac{t}{T} } }[/tex]

Where N is the remaining activity, N0 is the initial activity, t is the time passed, and T is the half-life.

We know that T = 32.0 hours, and we want to find t when N/N0 = 0.18. So we can rearrange the formula as:

0.18 = [tex]\frac{1}{2}^{\frac{t}{32} } }[/tex]

Taking the logarithm of both sides, we get:

log(0.18) = (t/32)log(1/2)

Solving for t, we get:

t = -32(log(0.18))/log(1/2) = 71.5 hours

Therefore, it would take approximately 71.5 hours for the activity of the sample of cesium-129 to fall to 18.0 percent of its original value.

Know more about   half-life   here:

https://brainly.com/question/25750315

#SPJ11

Find dy/dx by implicit differentiation, where 2x^5 + 7x^2y-6xy^5 = -2. dy/dx =

Answers

The value of dy/dx by implicit differentiation is:

[tex](-10x^4 - 14xy^2 + 6y^5)/(7x^2 - 30xy^4).[/tex]

To find dy/dx by implicit differentiation, we differentiate both sides of the given equation with respect to x, treating y as a function of x.

Step-by-step solution:

Differentiating [tex]2x^5 + 7x^2y - 6xy^5 = -2[/tex] with respect to x:

[tex]10x^4 + 14xy^2 + 7x^2(dy/dx) - 6y^5 - 30xy^4(dy/dx) = 0[/tex]

Now, let's isolate the term containing dy/dx:

[tex]7x^2(dy/dx) - 30xy^4(dy/dx) = -10x^4 - 14xy^2 + 6y^5[/tex]

Factoring out dy/dx:

[tex](dy/dx)(7x^2 - 30xy^4) = -10x^4 - 14xy^2 + 6y^5[/tex]

Finally, we can solve for dy/dx by dividing both sides by [tex](7x^2 - 30xy^4):[/tex]

[tex]dy/dx = (-10x^4 - 14xy^2 + 6y^5)/(7x^2 - 30xy^4)[/tex]

Therefore, dy/dx is equal to [tex](-10x^4 - 14xy^2 + 6y^5)/(7x^2 - 30xy^4).[/tex]

To know more about implicit differentiation refer here:

https://brainly.com/question/11887805

#SPJ11

use the binomial series to find (6)(0)f(6)(0) term for the ()=1−2⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯√.
(Use decimal notation. Give your answer as whole or exact number.)

Answers

The correct answer is 1/64.The 6th term in the binomial series expansion of f(x) is:(6 choose 6)(-2x^(1/2))^6 = 1/64So.

We can use the binomial series to expand the function f(x) = (1 - 2x^(1/2))^6 as:

f(x) = ∑(k=0 to 6) (6 choose k)(-2x^(1/2))^k

To find the 6th derivative of f(x) with respect to x, we only need to consider the term with k = 0 in this series. All other terms will have a power of x greater than 0, so they will evaluate to 0 when we take the 6th derivative.

So, we have:

f^(6)(x) = (6 choose 0)(-2x^(1/2))^0 = 1

Now, we can evaluate this expression at x = 0 to get the 6th derivative of f(x) at x = 0:

f^(6)(0) = 1.

For such more questions on Binomial series expansion:

https://brainly.com/question/13602562

#SPJ11

The (6)(0) term is the coefficient of x^6, which is 0 since there is no x^6 term in the expansion. Therefore, the answer is 0.

The binomial series for (1+x)^n, where n is a positive integer, is given by:

(1+x)^n = 1 + nx + (n(n-1)/2!) x^2 + (n(n-1)(n-2)/3!) x^3 + ... + (n choose k) x^k + ...

where (n choose k) is the binomial coefficient.

In this case, we have:

f(x) = (1-2x)^(-1/2)

n = -1/2

Using the binomial series, we can expand f(x) as:

f(x) = 1 + (n choose 1) (-2x) + (n+1 choose 2) (-2x)^2 + (n+2 choose 3) (-2x)^3 + ...

f(x) = 1 + (-1/2) (-2x) + (-1/2+1/2)(-2x)^2 + (-1/2+2/2)(-2x)^3 + ...

f(x) = 1 + x + (3/8) x^2 + (15/16) x^3 + ...

Know more about binomial series here:

https://brainly.com/question/30177068

#SPJ11

Find the y-intercept of the median-median line for the dataset. x 2,3,4,5,7,8,10,12,16,18,21 Y 1,4,6,3,7,6,10,17,20,21,3

Answers

The y-intercept of the median-median line for the given dataset is -2.25.

The median-median line is a line of best fit that is calculated by dividing the given data set into smaller groups of three points, computing the median of the x and y values in each group, and then finding the line that passes through the two median points. The y-intercept of the median-median line is the value of y when x is zero, which can be found by plugging in x = 0 into the equation of the line.

To know more about median-median line,

https://brainly.com/question/23566540

#SPJ11

Let x,x2,.... X10 be distinct Boolean random variables that are inputs into some logical circuit. How many distinct sets of inputs are there such that Xi + 32 +..29 + 210 = n=1 In = 4?

Answers

There are 210 distinct sets of inputs for the given logical circuit where the sum of the Boolean random variables equals 4.

Since x1, x2, ..., x10 are distinct Boolean random variables, they can only take the values 0 or 1. In order to satisfy the given condition, we need to find the number of distinct sets of inputs such that exactly four of the variables are 1 and the rest are 0.

This can be viewed as selecting 4 variables out of 10 to be equal to 1. The number of distinct sets can be determined by calculating the combinations: C(10,4) = 10! / (4! * 6!) = 210. Therefore, there are 210 distinct sets of inputs that satisfy the given condition.

To know more about logical circuit click on below link:

https://brainly.com/question/30111371#

#SPJ11

The position of a particle moving in the xy-plane is given by the parametric equations x(t) = cos(2') and y(t) = sin(2) for time t 2 0. What is the speed of the particle when t = 2.3 ? (A) 1.000 (B) 2.014 (C) 3.413 (D) 11.652

Answers

The speed of the particle when t = 2.3 is approximately 2.014, which corresponds to option (B).


1. We are given the parametric equations x(t) = cos(2t) and y(t) = sin(2t).
2. To find the speed, we need to find the magnitude of the velocity vector, which is given by the derivative of the position vector with respect to time.
3. Differentiate x(t) and y(t) with respect to time, t:

  dx/dt = -2sin(2t)
  dy/dt = 2cos(2t)

4. Now, find the magnitude of the velocity vector, which is the speed:

  Speed = √((dx/dt)^2 + (dy/dt)^2)

5. Substitute the values of dx/dt and dy/dt, and plug in t = 2.3:

  Speed = √((-2sin(2*2.3))^2 + (2cos(2*2.3))^2)

6. Calculate the speed:

  Speed ≈ 2.014

The speed of the particle when t = 2.3 is approximately 2.014, which is option (B).

To learn more about equations visit:

https://brainly.com/question/10413253

#SPJ11

The correct option is (B) 2.014 .  The speed of particle when t = 2.3 is approximately 2.014,

To find the speed of the particle when t = 2.3, we need to calculate the derivative of the parametric equations with respect to time and then find the magnitude of the velocity vector.

The given parametric equations are x(t) = cos(2t) and y(t) = sin(2t).

First, find the derivatives with respect to time t:
dx/dt = -2sin(2t) and dy/dt = 2cos(2t).

Next, we'll find the magnitude of the velocity vector at t = 2.3:
|v(t)| = √((dx/dt)^2 + (dy/dt)^2).

Substitute t = 2.3 into the derivatives:
dx/dt = -2sin(2*2.3) and dy/dt = 2cos(2*2.3).

Now, find the magnitude:
|v(2.3)| = √((-2sin(4.6))^2 + (2cos(4.6))^2).

Calculate the values:
|v(2.3)| = √(((-2sin(4.6))^2 + (2cos(4.6))^2) ≈ 2.014.

Therefore, the speed of the particle when t = 2.3 is approximately 2.014, which corresponds to option (B).

Know more about the parametric equations

https://brainly.com/question/30451972

#SPJ11

The equation of a circle is given below. Identify the radius and the center. Then graph the circle.

Answers

The radius of the circle is 4 units, and the graph can be seen in the image at the end.

How to identify the radius of the circle?

The equation for a circle whose center is (a, b) and the radius is R, is:

(x - a)² + (y - b)² = R²

Here we have the circle equation:

2x² + 14x + 2y² - 4y = 11/2

Divide the whole equation by 2 to get:

x² + 7x + y² - 2y = 11/4

Now we can complete squares, we need to add:

3.5² and (-1)² in both sides, so we will get:

(x² + 2*3.5*x + 3.5²) + (y² - 2y +  (-1)²) = 11/4 + 3.5² + (-1)²

(x + 3.5)² + (y - 1)² = 16 = 4²

So the radius is 4, and the graph is on the image below.

Learn more about circles at:

https://brainly.com/question/25871159

#SPJ1

let f be a quasiconcave function. argue that the set of maximizers of f is convex.

Answers

We have shown that any point on the line segment connecting two maximizers of f is also a maximizer. This implies that the set of maximizers is convex.

If f is a quasiconcave function, it means that for any two points in the domain of f, the set of points lying above the curve formed by f is a convex set. This implies that the set of maximizers of f is also convex.

To see why, suppose there are two maximizers of f, say x and y. Since f is quasiconcave, any point on the line segment connecting x and y lies above the curve formed by f.

Now, if there exists a point z on this line segment that is not a maximizer, we can construct a new point by moving slightly towards the maximizer. By the definition of quasiconcavity, this new point will also lie above the curve formed by f.
To learn more about : maximizer

https://brainly.com/question/18521060

#SPJ11

A function is quasiconcave if its upper level sets are convex. Let's assume that f is a quasiconcave function and let M be the set of maximizers of f. To show that M is convex, we need to show that if x and y are in M, then any point on the line segment between them is also in M.

A quasiconcave function f has the property that for any two points x, y in its domain, f(min(x, y)) ≥ min(f(x), f(y)). The set of maximizers contains all points in the domain where f achieves its maximum value.

To show that this set is convex, consider any two points x, y within the set of maximizers. Let z be any point on the line segment connecting x and y, such that z = tx + (1-t)y for t ∈ [0,1]. Since f is quasiconcave, f(z) ≥ min(f(x), f(y)). However, both f(x) and f(y) are maximum values, so f(z) must also be a maximum value.

Suppose x and y are in M, which means that f(x) = f(y) = c, where c is the maximum value of f. Since f is quasiconcave, its upper level set {z | f(z) ≥ c} is convex. Therefore, any point on the line segment between x and y is also in this set, which means that it maximizes f as well. Therefore, z is in the set of maximizers, proving the set is convex. Hence, M is convex.

Learn more about quasiconcave here: brainly.com/question/29641786

#SPJ11

to compute the probability of having a loaded die turn up six, the theory of probability that would normally be used is the:

Answers

To compute the probability of a loaded die turning up six, the theory of probability that would typically be used is the Classical Probability Theory.

In this theory, we assume that each outcome of an experiment has an equal chance of occurring.

For a fair six-sided die, there are six possible outcomes (1, 2, 3, 4, 5, and 6), and each outcome has a probability of 1/6.

However, for a loaded die, the probabilities of the outcomes may be different.

To determine the probability of a loaded die turning up six, we need to know the specific probabilities assigned to each outcome. Once we have that information, we can compute the probability of a loaded die turning up six using the given probabilities.

Learn more about probability at https://brainly.com/question/20631009

#SPJ11

two point charges are located on an x axis; one is at the -1 cm mark and the other is at the 2 cm mark. what is the direction of the net electric field of these two charges at x=0?

Answers

The net electric field will point to the left, in the direction of E2.

To find the direction of the net electric field of two point charges at the origin, we need to consider the direction of the electric fields due to each charge and add them as vectors.

Assuming both charges are positive (or both negative), the electric field due to each charge points away from it. The magnitude of the electric field due to a point charge Q at a distance r from it is given by Coulomb's law:

E = kQ/r^2,

where k is the Coulomb constant (k = 9 × 10^9 N·m^2/C^2).

At x = 0, the electric field due to the charge at -1 cm (which we'll call Q1) points to the right and has a magnitude of:

E1 = kQ1/(-0.01)^2

At x = 0, the electric field due to the charge at 2 cm (which we'll call Q2) points to the left and has a magnitude of:

E2 = kQ2/(0.02)^2

To find the net electric field at x = 0, we need to add the electric fields due to each charge as vectors. Since the electric fields due to the two charges have equal magnitude, we can simply subtract them as vectors. The direction of the net electric field will be the direction of the resulting vector.

The vector subtraction of the two electric fields can be represented as:

E_net = E2 - E1

where the positive sign of E1 implies that its direction is opposite to E2.

Substituting  values of E1 and E2, we get:

E_net = k[(Q2/0.02^2) - (Q1/0.01^2)]

Since Q2 is farther from the origin than Q1, its electric field has a greater magnitude. Therefore, the net electric field will point to the left, in the direction of E2.

To know more about net electric field refer here:

https://brainly.com/question/11974397

#SPJ11

Divide 6 sqrt5cis (11pi/6) by 3 sqrt6cis (pi/2)

Answers

The quotient of the expression is (√30 / 3) cis (4π / 3).

Let's break down the given expressions into their magnitude and angle components:

Expression 1: 6√5cis(11π/6)

Magnitude: 6√5

Angle: 11π/6

Expression 2: 3√6cis(π/2)

Magnitude: 3√6

Angle: π/2

Now, let's apply the division rule:

Step 1: Divide the magnitudes:

6√5 ÷ 3√6

To divide the magnitudes, we divide the values under the square roots:

(6/3) * (√5/√6) = 2 * (√5/√6)

We can simplify this expression further by rationalizing the denominator. To rationalize, we multiply both the numerator and the denominator by the conjugate of the denominator (√6):

(2 * (√5/√6)) * (√6/√6) = (2√5 * √6) / (√6 * √6)

= (2√30) / 6

= √30 / 3

So, the magnitude component of the quotient is √30 / 3.

Step 2: Subtract the angles:

(11π/6) - (π/2)

To subtract the angles, we need a common denominator:

(11π/6) - (3π/6) = (11π - 3π) / 6 = 8π / 6

To simplify the angle, we divide the numerator and denominator by their greatest common divisor (2):

(8π / 6) ÷ (2/2) = (4π / 3)

So, the angle component of the quotient is 4π / 3.

Step 3: Combine the magnitude and angle components:

The quotient is given by (√30 / 3) cis (4π / 3).

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

Use a protractor to measure the angles shown for each given write whether the angleis acute right obtuse or straight

Answers

Right angles are angles that measure 90 degrees. Angle 2 is a right angle. Obtuse angles are angles that measure greater than 90 degrees but less than 180 degrees. Angle 3 is an obtuse angle. It measures approximately 130 degrees.

To measure the angles shown for each given, we need a protractor. A protractor is an instrument used to measure angles. It is a semicircular transparent sheet of plastic or glass with the edges marked from 0 to 180 degrees. To measure the angles, place the center of the protractor on the vertex of the angle.

Align the base line of the protractor with one of the sides of the angle. Determine the size of the angle by reading the number of degrees between the two sides of the angle. Using the angle measurements, we can categorize the angles as acute, right, obtuse or straight angles. Acute angles are angles that measure less than 90 degrees. In the given angles, angles 1 and 4 are acute angles. Angle 1 measures approximately 60 degrees and angle 4 measures approximately 45 degrees.

Right angles are angles that measure 90 degrees. Angle 2 is a right angle. Obtuse angles are angles that measure greater than 90 degrees but less than 180 degrees. Angle 3 is an obtuse angle. It measures approximately 130 degrees. Straight angles are angles that measure 180 degrees. There is no straight angle in the given angles. The measures of the angles using the protractor and the category of each angle are summarized in the table below. Angle Measurement

Category Angle 160 degrees

Acute Angle 290 degrees

Right Angle 3130 degrees

Obtuse Angle 445 degrees

To know more about obtuse angle visit:

https://brainly.com/question/30813354

#SPJ11

use the derivative f′(x)=(x−2)(x 1)(x 4) to determine the local maxima and minima of f and the intervals of increase and decrease. sketch a possible graph of f (f is not unique).

Answers

The graph will generally exhibit a local maximum at x = 2 and local minima at x = -1 and x = -4

To determine the local maxima and minima of the function f(x) = (x-2)(x+1)(x+4), we can analyze the derivative f'(x). By setting f'(x) equal to zero and solving for x, we can find the critical points of f. The intervals of increase and decrease can be determined by examining the sign of f'(x) in different intervals. Sketching a graph of f can provide a visual representation of its behavior, but it's important to note that the specific shape of the graph may vary.

To find the critical points of f(x), we set f'(x) = 0 and solve for x. In this case, f'(x) = (x-2)(x+1)(x+4). Setting this equal to zero, we find that the critical points are x = 2, x = -1, and x = -4. These are the points where f(x) may have local maxima or minima.

To determine the intervals of increase and decrease, we can examine the sign of f'(x) in different intervals. We can choose test points within each interval and evaluate f'(x) to determine its sign. For example, in the interval (-∞, -4), we can choose x = -5 as a test point. Evaluating f'(-5), we find that f'(-5) < 0, indicating that f(x) is decreasing in this interval. By applying a similar process to the other intervals (-4, -1) and (-1, 2), we can determine the intervals of increase and decrease for f(x).

Sketching a graph of f(x) can help visualize the behavior of the function. However, it's important to note that the specific shape of the graph may vary. The graph will generally exhibit a local maximum at x = 2 and local minima at x = -1 and x = -4, but the curvature and overall shape of the graph will depend on factors such as the scale of the axes and the positioning of the critical points.

Learn more about critical points here;

https://brainly.com/question/32077588

#SPJ11

Factor 25x2 10x 1. (5x 1)² (25x 1)(x 1) (5x 1)(5x - 1)

Answers

The answer is (5x + 1)².

The answer to the given question is (5x + 1)(5x + 1) which can be written as (5x + 1)². This can be solved by using the below method:Solve the equation by looking for two numbers that multiply to give you 25x2 and add up to give you 10x. To solve the equation, find factors of 25 that multiply to give you 25x2 and factors of 1 that multiply to give you 1. The expression that will be factored is 25x2 10x 1 and the factors that multiply to give 25x2 are 25x and x.

The factors that multiply to give 1 are 1 and 1. Thus, the factors of 25x2 10x 1 are (25x 1)(x 1).To factor the expression, first multiply 25x by 1 and add this result to the product of x and 1, which gives 25x + x = 26x. Next, set this sum equal to the middle coefficient of the original expression, which is 10x. Since 26x does not equal 10x, try different pairs of factors of the constant term 1 until one works. In this case, the pair that works is 5 and 1, since 5 + 5 + 1 + 1 = 12 and 5(1) + 5(1) = 10. Therefore, factor 25x2 10x 1 as (5x + 1)(5x + 1), which can be written as (5x + 1)².Hence, the answer is (5x + 1)².

Learn more about Multiply here,the product that results from multiplying the same number over and over is a blank of that number

https://brainly.com/question/10873737

#SPJ11

(a) You are given the point (3,0) in polar coordinates. (i) Find another pair of polar coordinates for this point such that r>0 and 2π≤θ<4π. (ii) Find another pair of polar coordinates for this point such that r<0 and 0≤θ<2π.

Answers

The new pairs of polar coordinates are (3,2π) for r>0 and 2π≤θ<4π, and (-3,π) for r<0 and 0≤θ<2π.



(a) You are given the point (3,0) in polar coordinates.

(i) To find another pair of polar coordinates for this point such that r>0 and 2π≤θ<4π, follow these steps:

1. Start with the given coordinates (3,0).
2. Since we want to keep r>0, r remains 3.
3. To find a new angle θ that is between 2π and 4π, we can add 2π to the current angle (0 + 2π = 2π).
4. The new pair of polar coordinates is (3,2π).

(ii) To find another pair of polar coordinates for this point such that r<0 and 0≤θ<2π, follow these steps:

1. Start with the given coordinates (3,0).
2. To make r<0, we can multiply the current r by -1: (-3).
3. To find a new angle θ that is between 0 and 2π, we can add π to the current angle (0 + π = π).
4. The new pair of polar coordinates is (-3,π).

So, the new pairs of polar coordinates are (3,2π) for r>0 and 2π≤θ<4π, and (-3,π) for r<0 and 0≤θ<2π.

Learn more about polar coordinates:

https://brainly.com/question/11657509

#SPJ11

150. G of aluminum chloride in 0. 450 liters of solution, what is the concentration? (any examples are helpful, thank you)

Answers

The concentration of a solution can be defined as the quantity of solute per unit volume of the solution. It can be represented in various units such as molarity (moles of solute per liter of solution), normality (number of equivalent weights of solute per liter of solution), and molality (moles of solute per kilogram of solvent).

The concentration of a solution can be defined as the quantity of solute per unit volume of the solution. It can be represented in various units such as molarity (moles of solute per liter of solution), normality (number of equivalent weights of solute per liter of solution), and molality (moles of solute per kilogram of solvent). Here, we have been given 150 g of aluminum chloride in 0.450 liters of solution and we need to find its concentration. The first step in finding the concentration of a solution is to determine the number of moles of solute present in it. The molar mass of aluminum chloride is 133.34 g/mol. Hence, the number of moles of aluminum chloride present in the given solution is: 150 g / 133.34 g/mol = 1.125 mol

Now, we can calculate the concentration of the solution using the formula: Concentration = Number of moles of solute / Volume of solution in liters= 1.125 mol / 0.450 L= 2.50 M

Therefore, the concentration of the given solution of aluminum chloride is 2.50 M. The solution to the given problem is as follows. We have been given 150 g of aluminum chloride in 0.450 liters of solution, and we need to find its concentration. The concentration of a solution is defined as the amount of solute per unit volume of the solution, and it can be expressed in different units such as molarity, molality, and normality. The molarity of a solution is the number of moles of solute per liter of solution. Hence, the first step in finding the concentration of the given solution is to determine the number of moles of aluminum chloride present in it. We can do this by dividing the given mass of aluminum chloride by its molar mass. The molar mass of aluminum chloride is the sum of the atomic masses of aluminum and chlorine, which is 26.98 + 2 x 35.45 = 133.34 g/mol.

Therefore, the number of moles of aluminum chloride present in the given solution is: 150 g / 133.34 g/mol = 1.125 mol. Now, we can calculate the molarity of the solution using the formula: Molarity = Number of moles of solute / Volume of solution in liters. Hence, the molarity of the given solution is: 1.125 mol / 0.450 L = 2.50 M. Therefore, the concentration of the given solution of aluminum chloride is 2.50 M.

To know more about molality visit:

https://brainly.com/question/30640726

#SPJ11

Other Questions
json is commonly used in conjunction with the 'document store' nosql database model. group of answer choices true false Validating Solutions: Let's show that equations (4) and (9) are actually the behavior we expect for these circuits (assuming the differential equations (3) and (8) hold). Note that we're not actually deriving these formulas, just showing that they do work (i.e., that they solve the differential equation like we want them to). This has the following steps: O Differential Equation, LR Circuits: Take (4), and plug it into (3) (taking a derivative where necessary). Do the algebra to show that you get the same thing on both sides. O Differential Equation, LC Circuits: Take (9), and plug it into (8) (taking derivatives where necessary). Do the algebra to show that you get the same thing on both sides. O Initial Conditions, LR Circuits: Take (4), and plug in t = 0. Show that you get the same thing on both sides (i.e., I(0) = 10). O Initial Conditions, LR Circuits: Take (9), and plug in t= 0. Show that you get the same thing on both sides (i.e., Q'(0) = Q'(0)). Lindsey would like to know the number of people at a movie theater who will buy a movie ticket and popcorn, Based on past data, the probability that a person who is selected at random from those that buy movie tickets will also buy popcorn is 0.6. Lindsey designs a simulation to estimate the probability that exactly two in a group of three people selected randomly at a movie theater will buy both a movie ticket and popcorn. For the simulation, Lindsey uses a number generator that generates random numbers. Any number from 1 through 6 represents a person who buys a movie ticket and popcorn Any number from 7 through 9 or 0 represents a person who buys only a movie ticket. . For each trial, Lindsey generates three numbers. Lindsey ran 30 trials of the simulation and recorded the results in the following table; 266 342 847 672 567 268 252 465 573 100 818 139 730 910 494 922 155 585 426 593 903 556 981 966 491 186 865 044 147 311L 12 AM PARTA In the simulation, one result was "100. What does this result simulate? a. A No one in a group of three randomly-chosen people who buy movie tickets also buys popcorn. b. Exactly one person in a group of three randomly-chosen people who buy movie tickets also buys popcom. c. Exactly two people in a group of three randomly-chosen people who buy movie tickets also buy popcornd. All three people in a group of three randomly-chosen people who buy movie tickets also buy popcorn Global History Questions, around 1600-1700How did the Englightenment change basic attitudes toward reform, religion, and reason? What factors affected the Englightenment philosophers? Who were some of the importsnt philosophers who contributed to the Englightenment? Urban heat islandsA: do not spread very far from the city boundaries.B: vary with city population.C: have little effect on local temperatures.D: has little or no impact on local weather. 16. when water freezes in a closed jar both its volume and its pressure increase,eventually bursting the jar. does this violate the second-order conditionpv < 0? explain. a solution is prepared by dissolving 62.0 g of glucose, c6h12o6, in 125.0 g of water. at 30.0 c pure water has a vapor pressure of 31.8 torr. what is the vapor pressure of the solution at 30.0 c. An LRC series circuit has R = 15.0 ?, L = 25.0 mH, and C = 30.0 ?F. The circuit is connected to a120-V (rms) ac source with frequency 200 Hz.(a) What is the impedance of the circuit?(b) What is the rms current in the circuit?(c) What is the rms voltage across the resistor?(d) What is the rms voltage across the inductor?(e) What is the rms voltage across the capacitor? if star a is closer to us than star b, then star a's parallax angle is _________. larger than that of star b smaller than that of star b fewer parsecs than that of star b hotter than that of star b Arrange the following tripod-shaped molecules in order of decreasing dipole moment. so from largest to smallest dipole moment.NH3, AsH3, and PH3 An example of what the economist and social historian Thorstein Veblen meant by "conspicuous consumption" is: Build a monster database that allows the user to view, sort, and save creature infor-mation. When viewing and sorting creature data, the data should be dynamicallyallocated based on the file entries. After printing the requested data tostdout, theallocated memory should be released. When adding a creature, save the data in CSV format to the database file as thelast entry. For sorting data, a second submenu should ask the user which stat they want tosort by. Sorting should be done by passing the relevant comparison function toqsort. Data should be sorted in descending order only (greatest to least). Forsorting strings, you can use the result ofstrcmp Determine whether the matrix is in echelon form, reduced echelon form, or neither. [1 0 5 41 O 1-5 -3 0 0 0 0 0 0 0 0] a) Neither. b) Echelon form. c) Reduced echelon form use part one of the fundamental theorem of calculus to find the derivative of the function. f(x) = 0 1 sec(7t) dt x hint: 0 x 1 sec(7t) dt = x 0 1 sec(7t) dt members of the phylum gnetophyta have strobili that resemble flower clusters. group of answer choices true false consider a signal f(t) = sinc(105t) that is amplitude mo dulated (am) by mixing it with cos(ct), where c = 106ra which of the following is not one of the basic tax rate structures? progressive equitable proportional regressive all of these are different kinds of the basic tax rate structures what would minimum wage be adjusted for inflation 2022 an item is selected randomly from a collection labeled {1,2,...,n}. Denote its label by X. Now select an integer Y uniformly at random from {1,2,...X}. Find :a) E(Y)b) E(Y^(2))c) standard deviation of Yd) P(X+Y=2) the alpha particles emitted by radon222 have an energy of 8.8 1013 j. if a 200. g pb brick absorbs 1.0 1010 alpha particles from radon decay, what dose in rads will the brick absorb?