evaluate the definite intergral integral from (1)^8[x x^2]/[x^4] dx. 4. (a) Find the average value of cost on the intervals [0, pi], [0, pi/2] ,[0, pi/4] , [0, 0.01]. (b) Determine the general formula for f-bar[0,x] the average of cost over the interval [0, x]. (c) Calculate lim x tends to 0 f-bar[0,x]. 5. Evaluate the definite integral int 0 to pi/3 (sec^2x + 3x)dx. 6. Evaluate int 0 to pi |cos s| ds.

The function y=(x-2)²-1 has vertex (2, -1), focus (2, -3/4) and axis of symmetry is x=2.

1) y=-x²+4x+3

From the given graph,

Direction: Opens Down

Vertex: (2,7)

Focus: (2,27/4)

Axis of Symmetry: x=2

Directrix: y=29/4

To find the x-intercept, substitute in 0 for y and solve for x. To find the y-intercept, substitute in 0 for x and solve for y.

x-intercept(s): (2+√7,0),(2−√7,0)

y-intercept(s): (0,3)

Find the domain by finding where the equation is defined. The range is the set of values that correspond with the domain.

Domain: (−∞,∞),{x|x∈R}

Range: (−∞,7],{y|y≤7}

3) y=(x-2)²-1

Graph the parabola using the direction, vertex, focus, and axis of symmetry.

Direction: Opens Up

Vertex: (2,−1)

Focus: (2,−3/4)

Axis of Symmetry: x=2

Directrix: y=−5/4

To find the x-intercept, substitute in 0 for y and solve for x. To find the y-intercept, substitute in 0 for x and solve for y.

x-intercept(s): (3,0),(1,0)

y-intercept(s): (0,3)

Find the domain by finding where the equation is defined. The range is the set of values that correspond with the domain.

Domain: (−∞,∞),{x|x∈R}

Range: [−1,∞),{y|y≥−1}

Therefore, the function y=(x-2)²-1 has vertex (2, -1), focus (2, -3/4) and axis of symmetry is x=2.

To learn more about the function visit:

https://brainly.com/question/28303908.

#SPJ1

After observing both the graphs the required fields are described below.

In the given graph of the equation,

y = -x² + 4x + 3

From the graph of the this curve

We can see that,

X - intercept of this graph is at (-0.646 , 0) and (4.646, 0)

Y - intercept of this graph is at (0, 3)

Vertex of this graph is at (2, 7)

Domain is whole real line,

Range is (-∞, 7]

Axis of symmetry is x axis.

Increasing in the interval : (-∞, 2]

Decreasing in the interval : [7, ∞)

In the given graph of the equation,

y = (x-2)² - 1

From the graph of the this curve

We can see that,

X - intercept of this graph is at (1 , 0) and (3, 0)

Y - intercept of this graph is at (0, 3)

Vertex of this graph is at (2, -1)

Domain is real number,

Range is [-1, ∞)

Axis of symmetry is x axis.

Increasing in the interval : (-∞, 1]U[3,∞)

Decreasing in the interval : (1, 3)

To learn more about graph of function visit:

https://brainly.com/question/12934295

#SPJ1

Answer: 729

Step-by-step explanation: 100 x 7 x 29 = 729 over 100

729 divided by 100 = 7.29

7.29 x 100 = 729

The weight more the green block weigh than the purple block is 8.23 pounds

We are given that;

Weight= 0.77 pounds

Number of blocks= 9

Now,

To find how much more the green block weighed than the purple block, we can subtract the weight of the purple block from the weight of the green block. This is called finding the difference between two numbers. We can write this as:

Difference=Green block−Purple block

Plugging in the given values, we get:

Difference=9−0.77

To subtract these numbers, we need to align the decimal points and subtract each place value from right to left. We can also add a zero after the decimal point in 9 to make it easier to subtract. We get:

−​9.000.778.23​​

Therefore, by algebra the answer will be 8.23 pounds.

More about the Algebra link is given below.

brainly.com/question/953809

#SPJ1

Since the highway department is intentionally manipulating the type of concrete used in the study, it can be classified as experimental.

Based on the given information, the study in question can be classified as experimental.

This is because the highway department intentionally manipulates the two independent variables - Type A and Type B concrete - by paving one section with each type.

They then observe the dependent variable, which is the time it takes for cracks to appear on each section.

In an experimental study, the researcher manipulates one or more independent variables to observe their effect on a dependent variable.

The goal is to establish cause-and-effect relationships between variables and to do so, the researcher must have control over the conditions under which the study is conducted.

In this case, the highway department has control over the two types of concrete used, the sections of the highway where they are applied, and the time frame for observing cracks.

By manipulating these variables, they can compare the effects of Type A and Type B concrete on the longevity of the pavement, and draw conclusions about which type is more effective in preventing cracking.

Observational studies, on the other hand, involve observing and recording data without actively manipulating any variables.

In an observational study, the researcher does not have control over the conditions under which the study is conducted, and cannot establish cause-and-effect relationships between variables.

Therefore, since the highway department is intentionally manipulating the type of concrete used in the study, it can be classified as experimental.

Know more about manipulation here:

https://brainly.com/question/10200751

#SPJ11

Since z is greater than both, it assigns the value of z to R, making it 8. Therefore, at the end of the code, the value of R would be 8.

At the end of the code, the value of R would be 8. The code first adds the value of y to x, making x equal to 9. It then sets the value of R to y, which is 5. The first if statement compares x to y and since x is greater than y, it assigns the value of x to R, making it 9. The second if statement checks if z is greater than both x and y.

Learn more about value here:

https://brainly.com/question/24503916

#SPJ11

Using logarithmic differentiation, the derivative of y with respect to x is given by y' is (x+9)(x+3)(x+2) + (x+9)(x+3)(x+6) + (x+9)(x+2)(x+6) + (x+3)(x+2)(x+6)

We have y=(x+9)(x+3)(x+2)(x+6).

Taking the natural logarithm of both sides, we get

ln(y) = ln[(x+9)(x+3)(x+2)(x+6)]

Using the properties of logarithms, we can simplify this to:

ln(y) = ln(x+9) + ln(x+3) + ln(x+2) + ln(x+6)

Now, we can implicitly differentiate both sides with respect to x

1/y * y' = 1/(x+9) + 1/(x+3) + 1/(x+2) + 1/(x+6)

Multiplying both sides by y, we get

y' = y * [1/(x+9) + 1/(x+3) + 1/(x+2) + 1/(x+6)]

Substituting y=(x+9)(x+3)(x+2)(x+6), we get

y' = (x+9)(x+3)(x+2)(x+6) * [1/(x+9) + 1/(x+3) + 1/(x+2) + 1/(x+6)]

Simplifying this expression, we get

y' = (x+9)(x+3)(x+2) + (x+9)(x+3)(x+6) + (x+9)(x+2)(x+6) + (x+3)(x+2)(x+6)

Thus, y' = (x+9)(x+3)(x+2) + (x+9)(x+3)(x+6) + (x+9)(x+2)(x+6) + (x+3)(x+2)(x+6)

To know more about logarithmic differentiation:

https://brainly.com/question/32030515

#SPJ4

--The given question is incomplete, the complete question is given

" use logarithmic differentiation to determine y′ for the equation y=(x+9)(x+3)(x+2)(x+6). write your answer in terms of x only."--

When 97.5 g of Hg reacts with oxygen, approximately 22.0 kJ of heat is released.

To calculate the heat released when 97.5 g of Hg reacts with oxygen, you'll first need to find the moles of Hg reacted. The molar mass of Hg is 200.59 g/mol.

moles of Hg = mass (g) / molar mass (g/mol)
moles of Hg = 97.5 g / 200.59 g/mol = 0.486 mol

The balanced equation for the reaction is:
2 Hg (l) + O2 (g) → 2 HgO (s)

From the balanced equation, 2 moles of Hg react with 1 mole of O2 to produce 2 moles of HgO. The given ΔH for this reaction is -90.8 kJ.

Now, we need to find the heat released per mole of Hg reacted:

ΔH (per mole of Hg) = ΔH (reaction) / moles of Hg (in balanced equation)
ΔH (per mole of Hg) = -90.8 kJ / 2 = -45.4 kJ/mol

Finally, calculate the heat released for 0.486 mol of Hg:

Heat released = ΔH (per mole of Hg) × moles of Hg
Heat released = -45.4 kJ/mol × 0.486 mol = -22.0 kJ

When 97.5 g of Hg reacts with oxygen, approximately 22.0 kJ of heat is released.

learn more about molar mass

https://brainly.com/question/22997914

#SPJ11

The d939/dx939 (cos x) is equal to (-1)^939 cos x.

To find d939/dx939 (cos x), we need to compute the first few derivatives of cos x and look for a pattern. The derivative of cos x is -sin x, and the second derivative is -cos x.

Continuing this pattern, we see that the nth derivative of cos x is (-1)^n cos x. Thus, the 939th derivative of cos x is (-1)^939 cos x. This means that the derivative of cos x with respect to x has a pattern of alternating signs and is always equal to cos x.

In summary, by computing the first few derivatives and identifying a pattern, we can determine the 939th derivative of cos x with respect to x.

To learn more about : equal

https://brainly.com/question/25770607

#SPJ11

The length of the hypotenuse of the right angled triangle = 5.2 cm

In the attached figure of right angled triangle let a represents the horizontal side and b represents the vertical side.

Let us assume that c represents the hypotenuse of the right triangle.

Using Pythagoras theorem for this right angles triangle we get,

c² = a² + b²

Here, a = 4.8 cm and b = 2 cm

substituting these values in the above equation we get,

c² = (4.8)² + 2²

c² = 23.04 +4

c² = 27.04

c = √(27.04)

c = 5.2 cm

This is the length of the hypotenuse of the right-angled triangle.

Learn more about the Pythagoras theorem here:

https://brainly.com/question/343682

#SPJ1

The number of X values listed in the first column of the frequency distribution table will be d) 4.

In a frequency distribution table, the first column typically represents the range or interval of the scores. Since the given sample has a range from X = 7 to X = 4, the first column of the frequency distribution table will include the four distinct X values: X = 4, X = 5, X = 6, and X = 7.

hese are the possible values within the given range, and thus, there will be 4 X values listed in the first column. So the correct option is d in this question.

For more questions like Sample click the link below:

https://brainly.com/question/30759604

#SPJ11

Expressions (1 + 0.05)g and 1.05g represent this week's price of gasoline per gallon accurately, accounting for the 5% increase from last week's price.

To calculate this week's price of gasoline per gallon, we need to consider the 5% increase from last week's price. Let's analyze each expression:

(1 + 0.05)g: This expression represents the new price after adding 5% to the original price (represented by g). It correctly accounts for the increase and gives the updated price.

0.05g: This expression calculates 5% of the original price but does not include the original price itself. It does not represent this week's price accurately.

1.05g: This expression represents the price after a 5% increase. It accurately reflects this week's price and is the correct representation.

0.05g + g: This expression combines the 5% increase with the original price. However, it should be represented as (1 + 0.05)g to accurately reflect the new price.

0.05 + g: This expression adds 0.05 to the original price, but it does not consider the 5% increase. It does not accurately represent this week's price.

Therefore,  expressions (1 + 0.05)g and 1.05g correctly represent this week's price of gasoline per gallon, accounting for the 5% increase from last week's price.

To know more about accounting, visit:

https://brainly.com/question/30189009

#SPJ11

The least common multiple (LCM) of 60 and 90 is 180.

The LCM of 220 and 1400 is 3080.

The LCM of 3273∙11 and 23∙5∙7 is 127155.

To find the LCM of 60 and 90, we can list their multiples and find the smallest common multiple, which is 180.

For the numbers 220 and 1400, we can find their prime factorizations (220 = 4 × 5 × 11, 1400 = [tex]2^{3}[/tex] × 10 × 7). Then, we take the highest power of each prime factor and multiply them together to get the LCM, which is [tex]2^{3}[/tex] × 10 × 7 × 11 = 3080.

For the numbers 3273∙11 and 23∙5∙7, we multiply together all the distinct prime factors and their highest powers to obtain the LCM, which is 3273∙11∙23∙5∙7.

Learn more about LCM here:

https://brainly.com/question/24510622

#SPJ11

The trailing moving average of span 5 is 6.92.

The trailing moving average of span 5 for the given time series data is as follows:

t-5: (7.6 + 6.2 + 5.4 + 5.4 + 10)/5 = 6.92

t=6: (6.2 + 5.4 + 5.4 + 10 + 7.6)/5 = 6.92

t=7: (5.4 + 5.4 + 10 + 7.6 + 6.2)/5 = 6.92

t=8: (5.4 + 10 + 7.6 + 6.2 + 5.4)/5 = 6.92

t=9: (10 + 7.6 + 6.2 + 5.4 + 5.4)/5 = 6.92

t=10: (7.6 + 6.2 + 5.4 + 5.4 + 10)/5 = 6.92

Therefore, the trailing moving average of span 5 for time periods 5 through 10 is 6.92.

Learn more about trailing moving average

brainly.com/question/13835241

#SPJ11

the final simplified form of the expression is cot X + cot y + cot Y + tan y, which verifies the given identity.

Starting with the given expression: tan x + cot y tan y + cot X tan x cot y tan X + cot Y tan x cot y cot tan Itan y cot X tan y cot x tan y (cot x_ cot X tany tan y cot X cot X cot X tan y + cot X tan Y tan y

Rearranging the terms and grouping like terms: tan x + cot x cot X + cot y (tan y + cot y) + cot X (tan x + cot X) + cot Y (tan x + cot Y) + tan y

Simplifying cot x cot X + cot y (tan y + cot y) + cot X (tan x + cot X) + cot Y (tan x + cot Y):

cot x cot X can be simplified to 1 using the identity cot x cot X = 1.

tan y + cot y can be simplified to cot y using the identity tan y + cot y = cot y.

tan x + cot X can be left as it is.

cot Y (tan x + cot Y) can be simplified to cot Y using the identity cot Y (tan x + cot Y) = cot Y.

The remaining term tan y stays as it is.

Combining the simplified terms: cot X + cot y + cot Y + tan y.

Learn more about identity tan here:

https://brainly.com/question/31270049

#SPJ11

The statement "IRI = |Nl" is false. because The symbol "|Nl" is not well-defined and it's not clear what it represents.

On the other hand, |N| represents the set of natural numbers, which are the positive integers (1, 2, 3, ...). These two sets are not equal.

Furthermore, the diagonalization argument is used to prove that the set of real numbers is uncountable, which means that there are more real numbers than natural numbers. This argument shows that it is impossible to construct a one-to-one correspondence between the natural numbers and the real numbers, even if we restrict ourselves to the interval [0, 1]. Hence, it is not possible to prove IRI = |N| using diagonalization argument.

In order to prove that two sets are equal, we need to show that they have the same elements. So, we would need to define what "|Nl" means and then show that the elements in IRI and |Nl are the same.

for such more question on natural numbers

https://brainly.com/question/19079438

#SPJ11

It seems your question is about the diagonalization argument and cardinality of sets. A diagonalization argument is a method used to prove that certain infinite sets have different cardinalities. Cardinality refers to the size of a set, and when comparing infinite sets, we use the term "order."

In your question, you are referring to the sets N (natural numbers), IRI (real numbers), and the interval [0, 1]. The goal is to prove that the cardinality of the set of real numbers (|IRI|) is equal to the cardinality of the set of natural numbers (|N|).

Through a diagonalization argument, we can show that the cardinality of the set of real numbers in the interval [0, 1] (|IRI [0, 1]|) is larger than the cardinality of the set of natural numbers (|N|). This implies that the two sets cannot be put into a one-to-one correspondence.

Then, in order to prove that |IRI| = |N|, we would need to find a one-to-one correspondence between the two sets. However, the diagonalization argument shows that this is not possible.

Therefore, the statement in your question is False, because we cannot prove that |IRI| = |N| by showing a one-to-one correspondence between them.

To learn more about Cardinality  : brainly.com/question/29093097

#SPJ11

To identify the function f and express the given limit as a definite integral, we can observe the Riemann sum expression and recognize its similarity to the definition of the definite integral. Answer : ∫[1,2] x * tan^2(x) dx.

In the given expression, we have the Riemann sum:

∑ k=1^n x_k * tan^2(x_k) * Δx_k

To express this limit as a definite integral, we recognize that the function f(x) = x * tan^2(x) is being approximated by the Riemann sum.

We can rewrite the Riemann sum as:

∑ k=1^n f(x_k) * Δx_k

Now, we can see that the function f(x) = x * tan^2(x) and the interval [a, b] are given. In this case, a = 1 and b = 2.

To express the given limit as a definite integral, we take the limit as Δx_k approaches zero and rewrite the Riemann sum as the definite integral:

lim Δx_k→0 ∑ k=1^n f(x_k) * Δx_k

This limit can be written as:

∫[a,b] f(x) dx

Substituting the values of a and b, we have:

∫[1,2] x * tan^2(x) dx

Therefore, the limit expressed as a definite integral is ∫[1,2] x * tan^2(x) dx.

Learn more about  Riemann sum: brainly.com/question/30404402

#SPJ11

the only values of k for which y = sin(kt) satisfies the differential equation y″ - 20y = 0 are k = nπ/t for any integer n.

We are given the differential equation y″ - 20y = 0, and we need to find all values of k for which y = sin(kt) satisfies this equation.

First, we find the second derivative of y with respect to t:

y′ = k cos(kt)

y″ = -k^2 sin(kt)

Now we substitute these expressions for y, y′, and y″ into the differential equation:

y″ - 20y = (-k^2 sin(kt)) - 20(sin(kt)) = 0

Factorizing out sin(kt), we get:

sin(kt)(-k^2 - 20) = 0

This equation is satisfied when either sin(kt) = 0 or (-k^2 - 20) = 0.

When sin(kt) = 0, we have k = nπ/t for any integer n.

When (-k^2 - 20) = 0, we have k^2 = -20, which has no real solutions.

To learn more about derivative visit:

brainly.com/question/30365299

#SPJ11

The 88th percentile of the population is 68.5, rounded to one decimal place.

To find the 88th percentile of a normal distribution with mean 58 and standard deviation 9, we can use the TI-84 Plus calculator as follows:

The result is approximately 68.5. Therefore, the 88th percentile of the population is 68.5, rounded to one decimal place.

To know more about standard deviation refer to-

https://brainly.com/question/23907081

#SPJ11

The class NP of languages is closed under union, intersection, concatenation, and Kleene star. However, NP is not closed under complement.

The class NP (nondeterministic polynomial time) consists of languages for which a solution can be verified in polynomial time. To prove closure under various operations, we need to show that given two languages A and B in NP, the resulting language obtained by applying the operation (union, intersection, concatenation, or Kleene star) to A and B is also in NP.

For union and intersection, we can construct a nondeterministic Turing machine that can verify solutions for both A and B independently. By combining these machines, we can verify solutions for the union or intersection of A and B. Therefore, NP is closed under union and intersection.

Similarly, for concatenation, we can concatenate the accepting paths of the machines for A and B to form an accepting path for the resulting language. This shows that NP is closed under concatenation.

For Kleene star, we can construct a machine that non-deterministically guesses the number of repetitions needed for the language A and verifies each repetition. Hence, NP is closed under Kleene star.

However, NP is not closed under complement. The complement of a language A consists of all strings that are not in A. While it is possible to verify a solution for A in polynomial time, verifying the absence of a solution (complement of A) would require checking an infinite number of potential solutions, making it outside the scope of NP. Thus, NP is not closed under complement.

Learn more about infinite here: https://brainly.com/question/30244114

#SPJ11

The test value for determining linear correlation between age and systolic blood pressure is the correlation coefficient, commonly denoted as "r."

To calculate the correlation coefficient, we need to use a statistical method such as Pearson's correlation coefficient. This coefficient measures the strength and direction of the linear relationship between two variables. In this case, the variables are age and systolic blood pressure.

By applying the formula for Pearson's correlation coefficient, we can find the test value. First, we calculate the mean of both age and systolic blood pressure. The mean age is (38+41+45+48+51+53+57+61+65)/9 = 52.33, and the mean systolic blood pressure is (116+120+123+131+142+145+148+150+152)/9 = 137.89.

Next, we calculate the sum of the products of the deviations from the mean for both age and systolic blood pressure. Using these values, we find the numerator of the correlation coefficient formula. Similarly, we calculate the sum of the squared deviations from the mean for both age and systolic blood pressure, which gives us the denominators for the formula.

Plugging in the values and performing the necessary calculations, we arrive at the correlation coefficient. The value of the correlation coefficient ranges from -1 to 1, where a value close to 1 indicates a strong positive linear relationship, a value close to -1 indicates a strong negative linear relationship, and a value close to 0 indicates a weak or no linear relationship.

Therefore, the test value for determining the linear correlation between age and systolic blood pressure is the correlation coefficient, which quantifies the strength and direction of the linear relationship between the two variables.

Learn more about blood pressure here:

https://brainly.com/question/12653596

#SPJ11

We can say that an open and complete branch indicates that there is at least one interpretation of the argument that leads to the conclusion being false.

This means that the argument is not valid and cannot be used to prove the conclusion.

To complete a truth-tree for an argument, you need to start by listing all the premises and the conclusion of the argument.

Then, we  need to use the rules of logic to create branches for each premise and the negation of the conclusion.

As you continue to branch out, you will reach a point where either all the branches are closed or at least one branch remains open.

If all the branches are closed, then the argument is valid.

However, if there is at least one open branch, then the argument is invalid.
Without knowing the specific argument you are referring to, we cannot complete the truth-tree.

For similar question on interpretation.

https://brainly.com/question/1638242

#SPJ11

Question: Consider the following argument:

P(a,a)

a=b

∴ P(a,c)

Complete the truth-tree for the argument to show that it has an open and complete branch, and is thus invalid.

Node 1

Node 2

Node 3

Node 4

P(a,b)

a=b

P(a,c)

Fill in the blanks for each of the following nodes:

Node 1:

Node 2:

Node 3:

Node 4:

In logic, a truth-tree is a method used to determine the validity of an argument. To complete a truth-tree, you start with the premises of the argument and then expand the tree by applying rules of inference to create new branches based on possible truth values of each proposition.

To show that an argument is invalid using a truth-tree, follow these steps:

1. Write down the premises of the argument and negate the conclusion.
2. Break down the sentences into their simpler components using truth-tree rules, such as conjunction, disjunction, and negation.
3. Continue to break down the sentences until you reach the atomic propositions.
4. Examine the tree branches for consistency. If a branch contains both an atomic proposition and its negation, it is closed.
5. Identify any open and complete branches. An open branch has atomic propositions that do not contradict each other.

If the truth-tree has at least one open and complete branch, the argument is invalid because it is possible for the premises to be true while the conclusion is false.

Learn more about truth-tree here: brainly.com/question/18270695

#SPJ11

The correct relationship between SST, SSR, and SSE is given by option b) SSR = SST - SSE.

SST stands for the total sum of squares, which represents the total variation in the data. It is calculated by taking the sum of the squared differences between each observation and the mean of the entire dataset.

SSR stands for the regression sum of squares, which represents the variation in the data that is explained by the regression model. It is calculated by taking the sum of the squared differences between each predicted value and the mean of the entire dataset.

SSE stands for the error sum of squares, which represents the variation in the data that is not explained by the regression model. It is calculated by taking the sum of the squared differences between each observed value and its corresponding predicted value.

Therefore, the correct relationship between SST, SSR, and SSE is given by the equation SSR = SST - SSE, as SSR represents the portion of the total variation in the data that is explained by the regression model, and SSE represents the portion that is not explained. Subtracting SSE from SST leaves us with SSR, which is the portion of the variation that is explained by the model.

To know more about squares refer to

https://brainly.com/question/28776767

#SPJ11

Answer:

0.31

Step-by-step explanation:

The first person can toss:

HHH

HHT

HTH

HTT

THH

THT

TTH

TTT

The second person can toss the same, so the total number of sets of tosses of the first person and second person is 8 × 8 = 64.

Of these 64 different combinations, how many have the same number of tails for both people?

First person              Second person

HHH                               HHH                              0 tails

HHT                                HHT, HTH, THH           1 tail

HTH                                HHT, HTH, THH           1 tail

HTT                                HTT, THT, TTH            2 tails

THH                               HHT, HTH, THH            1 tail

THT                                HTT, THT, TTH            2 tails

TTH                                HTT, THT, TTH            2 tails

TTT                                 TTT                               3 tails

                                    total: 20

There are 20 out of 64 results that have the same number of tails for both people.

p(equal number of tails) = 20/64 = 5/16 = 0.3125

Answer: 0.31

156.05 is respectfully the correct answer but 4 decimal place - 156.1

Using a standard normal distribution table, the probability that z is less than 0.76 is approximately 0.7764.

According to the central limit theorem, the sampling distribution of the sample mean is approximately normal with a mean equal to the population mean, which is $95 in this case, and a standard deviation equal to the population standard deviation divided by the square root of the sample size, which is $14/sqrt(50) ≈ $1.98. The central limit theorem applies when the sample size is large enough, typically n ≥ 30, and the population is not strongly skewed.

The standard error of the sampling distribution of sample means is equal to the standard deviation of the population divided by the square root of the sample size, which is $14/sqrt(50) ≈ $1.98.

To find the probability that a sample mean is less than $94, we need to standardize the sample mean using the formula z = (X - u) / SE, where X is the sample mean, u is the population mean, and SE is the standard error of the sampling distribution. Thus, z = (94 - 95) / 1.98 ≈ -0.51. Using a standard normal distribution table, the probability that z is less than -0.51 is approximately 0.3043.

To find the probability that a sample mean is between $94 and $96, we need to standardize both values and find the area between them under the standard normal distribution curve. Using the same formula as in (c), we get z1 = (94 - 95) / 1.98 ≈ -0.51 and z2 = (96 - 95) / 1.98 ≈ 0.51. Using a standard normal distribution table, the probability that z is between -0.51 and 0.51 is approximately 0.4641.

To find the probability that a sample mean is between $96 and $97, we follow the same steps as in (d) and get z1 = (96 - 95) / 1.98 ≈ 0.51 and z2 = (97 - 95) / 1.98 ≈ 1.01. Using a standard normal distribution table, the probability that z is between 0.51 and 1.01 is approximately 0.1554.

To find the probability that the sampling error ( X - u) would be $1.50 or less, we need to standardize this value and find the area to the left of it under the standard normal distribution curve. Thus, z = (1.5) / 1.98 ≈ 0.76. Using a standard normal distribution table, the probability that z is less than 0.76 is approximately 0.7764.

To learn more about Standard normal distribution :

https://brainly.com/question/4079902

#SPJ11

Answer:

-----------------

Given circle:

Use general equation of a circle:

where (h, k) is the center and r is radius

From the given equation, we see that:

Hence the center is (1, - 1) and radius is 11 units.

This is matching the last choice.

The probability density function of the time you arrive at a terminal (in minutes after 8:00 a. M. ) is given by f (x) = 0. 1 exp(− 0. 1x) for 0 < x.
a) 0.999
b) 14.4%
c) .3297

(a) The probability that you arrive by 9:00 a. M. is given by the cumulative distribution function (CDF) evaluated at x = 60 (since 9:00 a. M. is 60 minutes after 8:00 a. M.). The CDF is given by the integral of the PDF from 0 to x, which in this case is:

[tex]F(x)=\int\limits^x_0 {f(t)} \, dt=\int\limits^x_0 { 0.1e^{-0.1t}\, dt= -e^{-0.1x} + e^0= 1-e^{-0.1x}[/tex]

Evaluating the CDF at x = 60, we get:

F(60)=1−e−0.1×60≈0.999

So, the probability that you arrive by 9:00 a. M. is approximately 99.9%.

(b) The probability that you arrive between 8:15 a. M. and 8:30 a. M. is given by the CDF evaluated at x = 30 minus the CDF evaluated at x = 15 (since 8:15 a. M. is 15 minutes after 8:00 a. M., and 8:30 a. M. is 30 minutes after):

F(30)−F(15)=(1−e−0.1×30)−(1−e−0.1×15)≈0.283−0.139≈0.144

So, the probability that you arrive between 8:15 a.M and 8:30 a.M is approximately 14.4%.

c) The probability that you arrive before 8:40 a.M on two or more days of five days, assuming that your arrival times on different days are independent, can be calculated using the binomial distribution with n = 5 trials and success probability p = F(40), where F(40) is the CDF evaluated at x = 40 (since 8:40 a.M is 40 minutes after 8:00 a.M):

F(40)=1−e−0.1×40≈.3297

The probability of k successes in n independent trials with success probability p is given by the binomial formula:

P(k)=(kn​)pk(1−p)n−k

So, the probability of arriving before 8:40 a.M on two or more days out of five is given by:

P(2 or more successes)=P(2)+P(3)+P(4)+P(5)

=(25​)p2(1−p)3+(35​)p3(1−p)2+(45​)p4(1−p)1+(55​)p5(1−p)0

=(25​)(F(40))2(1−F(40))3+(35​)(F(40))3(1−F(40))2+(45​)(F(40))4(1−F(40))1+(55​)(F(40))5(1−F(40))0

≈.6826

So, the probability that you arrive before 8:40 a.M on two or more days out of five is approximately 68%.

Learn more about probability density function here:

https://brainly.com/question/31039386

#SPJ11

It is important to carefully interpret the results of hypothesis tests and significance tests in the context of the research question and the specific data being analyzed

If we conclude that β1 = 0 in a test of hypothesis or a test for significance of regression, it means that the slope of the regression line is not significantly different from zero. In other words, there is no significant linear relationship between the predictor variable (X) and the response variable (Y).

Since the correlation coefficient (ρ) measures the strength and direction of the linear relationship between two variables, a value of zero for β1 implies that ρ is also equal to zero. This means that there is no linear association between X and Y, and they are not related to each other in a linear fashion.

However, it is important to note that a value of zero for ρ does not necessarily imply that there is no relationship between X and Y. There could be a nonlinear relationship or a weak relationship that is not captured by the correlation coefficient.

Therefore, it is important to carefully interpret the results of hypothesis tests and significance tests in the context of the research question and the specific data being analyzed

To know more about hypothesis tests refer here

https://brainly.com/question/30588452#

#SPJ11

Answer:

2 dogs, D

Step-by-step explanation:

We multiply 12 and 1/6

12x1/6

12/6

2

The, net pay after federal tax & deductions of Raquel is $600.98. Hence, the correct option is A) $600.99.

Given information:

Gross pay = $732 Federal tax withholdings = $62  Social security tax = 6.2% Medicare tax = 1.45%  State tax = 21% of federal tax  

Net pay refers to the amount of pay that an employee takes home after deductions are taken out of their gross pay.

To determine the net pay, we first need to calculate the total deductions.

Social security tax = 6.2% of the gross pay = 6.2/100 × $732 = $45.38

Medicare tax = 1.45% of the gross pay

= 1.45/100 × $732

= $10.62

Total deduction = Federal tax withholdings + Social security tax + Medicare tax

= $62 + $45.38 + $10.62= $118

Now, let’s calculate the state tax.

State tax = 21% of federal tax

= 21/100 × $62

= $13.02

The total amount of deductions including state tax

= $118 + $13.02

= $131.02

The net pay

= Gross pay - Total deductions

= $732 - $131.02= $600.98 (approx)

To know more about net pay please visit :

https://brainly.com/question/28905653

#SPJ11

The line integral over the curve c of the function f(x,y) = 3x - 2y is 6.

To evaluate the line integral of the given function over the curve c, we need to parameterize the curve and express the function in terms of the parameter.

The curve c is given by x = sin(t), y = cos(t) for 0 ≤ t ≤ π, which is the top half of the unit circle. To parameterize the curve, we can use the following vector function:

r(t) = (sin(t), cos(t)), 0 ≤ t ≤ π

Then the line integral of the function f(x,y) = 3x - 2y over the curve c can be expressed as:

∫c f(x,y) ds = ∫π₀ (3sin(t) - 2cos(t)) ||r'(t)|| dt

where ||r'(t)|| is the magnitude of the derivative of r(t) with respect to t, which is:

||r'(t)|| = √(cos²(t) + sin²(t)) = 1

Substituting this value, we get:

∫c f(x,y) ds = ∫π₀ (3sin(t) - 2cos(t)) dt

Now, we can integrate the function with respect to t:

∫π₀ (3sin(t) - 2cos(t)) dt = [-3cos(t) - 2sin(t)]π₀

Substituting the limits of integration, we get:

∫c f(x,y) ds = [-3cos(π) - 2sin(π)] - [-3cos(0) - 2sin(0)]= (3 + 0) - (-3 - 0) = 6.

For such more questions on line integral:

https://brainly.com/question/28381095

#SPJ11

The intersection of f(x,y) = 3x - 2y on curve c is 6. To evaluate the system of a function on curve c, we need to evaluate the curve and represent the following discordant activities.

The curve c is given by x = sin(t), y = cos(t), where 0 ≤ t ≤ π, this is a semicircle. We can use the following vector function to measure the curve:

r(t) = (sin(t), cos(t)), 0 ≤ t ≤ π

So the function f(x, y) = 3x - 2y on the curve c it can be represented as:

∫c f(x,y) ds = ∫π₀ (3sin(t) - 2cos(t)) r'(t)dt

where r'(t) is the magnitude of the derivative of r(t) with respect to t, for example:

r'(t) = √(cos²(t) + sin²(t)) = 1

This substituting the value we get:

∫c f(x,y) ds = ∫π₀ (3sin(t) - 2cos(t)) dt

Now we can integrate the function t (∫π₀ (3sin(t)) ) - 2cos(t)) t) - 2cos(t)) dt = [-3cos(t) - 2sin(t)]π₀

Substitution at the limit of our shares :

∫c f(x,y) ds = [-3cos( π ) - 2sin(π)] - [-3cos(0) - 2sin(0)] = (3 + 0) - (-3 - 0) = 6.

Learn more about Curve:

brainly.com/question/28793630

#SPJ11