Answer:
Let’s get back to simple physics and the laws of motion. Your car and everything in it are traveling in a given direction, to stop in requires force be applied in the opposite direction over a period of time. This occurs extremely quickly in an accident and the force is greater because the time the opposing force is acting on the vehicle is very short. The airbag system is designed to offer you protection from the violent forces exerted on you during an accident.
There are three main components to your airbag system, the bag, the inflator and the sensor. The sensor must register a collision force roughly equal to hitting a brick wall at 10 to 15 mile per hour before it will trigger the airbag inflation. Once tripped the airbag system inflates through a chemical reaction between sodium azide (NaN3) and potassium nitrate (KNO3) which creates nitrogen gas. An igniter is set off which quickly burns the chemical fuel and creates the gas needed for expansion. The bag then blows out of its storage in a split-second. Immediately after inflation, when the chemical burn is complete, the airbag begins to deflate as the gasses escape from holes in the fabric.
Explanation:
What is the difference between hydrogen-2 and hydrogen-3?
A. Hydrogen-3 has one more neutron
B. Hydrogen-2 has 2 neutrons.
C. Hydrogen-2 has 4 protons.
D. Hydrogen-2 has no protons.
Plz help thank you!!!
Answer:
1. Covalent Bond
2. Ionic Bond
Explanation:
Covalent bonds are defined as the bond in which sharing of electrons takes place between atoms. The sharing of electrons is in equal number so that it form a stable balance of attraction and repulsion between atoms. In the given example of CO2 (first image) oxygen is sharing equal number of electrons with carbon to form a stable bond called covalent bond.
Ionic bonds are formed when valence electrons are transferred to other atoms and form oppositely charged ions. In ionic bond formation, the atoms that gain electrons become negatively charged and the atoms that loses electrons become positively charged. In the given example of Ca Cl2, Ca is also giving its 2 valence electrons to each Cl and there is no stable balance of attraction and repulsion between atoms.
Hence, the correct answer is:
1. Covalent Bond
2. Ionic Bond
If the object is falling under the influence of gravity alone, this is called?
Answer: gravitational energy
Explanation: If you have a book on a table and it might fall, its using gravitational energy because its depending on gravity to choose rather it will fall or just balance. It also depends on how high the object is off the ground
how many grams are in 7.4 moles of HgS?
Answer: 1721.6 grams
Explanation:
What is the role of an electron in an atom?
Electrons live inside the nucleus and carry a neutral charge.
Electrons circle the nucleus and have a positive charge.
O Electrons determine the reactivity of an atom.
Electrons act like a glue to hold the nucleus together
Answer
Electrons live inside the nucleus and carry a neutral charge.
Explanation:
What is the maximum number of electrons that an S orbital can have?
1 electron
2 electrons
4 electrons
3 electrons
can someone please help me with this question for chemistry. What is the number of moles in 1216 g Sr3(PO4)2? the 3,4, and 2 and small numbers that go under the letters btw
2C3H7OH + 9O2 -> 6CO2 + 8H2O
How Many Moles of CO2 can be produced by reacting 6 moles of C3H7OH with oxygen?
Answer:
Up to [tex]18\; \rm mol[/tex] [tex]\rm CO_2[/tex].
Explanation:
The equation for this reaction: [tex]2\; \rm C_3 H_7 OH + 9\; O_2 \to 6\; CO_2 + 8\; H_2O[/tex] is indeed balanced.
Notice that the coefficient of [tex]\rm C_3 H_7 OH[/tex] is [tex]2[/tex] while that of [tex]\rm CO_2[/tex] is [tex]6[/tex].
Therefore, each unit of this reaction would consume [tex]2[/tex] units of [tex]\rm C_3H_7OH[/tex] while producing [tex]6[/tex] units of [tex]\rm CO_2[/tex]. In other words, this reaction would produce three times as much [tex]\rm CO_2\![/tex] as it consumes [tex]\rm C_3H_7OH\![/tex].
If all that [tex]6\; \rm mol[/tex] of [tex]\rm C_3H_7OH[/tex] molecules are actually consumed through this reaction, three times as many [tex]\rm CO_2[/tex] molecules would be produced. That corresponds to [tex]3 \times 6\; \rm mol = 18\; \rm mol[/tex] of [tex]\rm CO_2\![/tex] molecules.
help me plz i’ll give extra points
HELP ASAP!!!!!!! 30 POINTS + BRAINLIEST!!!!!!!!
Give examples of Avogadro, Boyle, and Charle's law.
Answer:
You can observe a real-life application of Boyle's Law when you fill your bike tires with air. When you pump air into a tire, the gas molecules inside the tire get compressed and packed closer together. This increases the pressure of the gas, and it starts to push against the walls of the tire.
Tyres of untouched vehicles get deflated during freezing winter days while get inflated in hot summer days. This unusual behaviour is because of Charles's law. In winter due to low temperatures, the air inside a tyre gets cooler, and they shrink. While in hot days, the air expands with temperature.
Another common example of Avogadro's law is the deflation of automobile tyres. When the air trapped inside the tyre escapes, the number of moles of air present in the tyre decreases. This results in a decrease in the volume occupied by the gas, causing the tyre to lose its shape and deflate.
Explanation:
Example of compound non polar covalent bond and polar covalent bond
Answer:
Explanation:
Nitrogen N2 has a non polar covalent bond.
Water H2O has polar covalent bonds between the H and O atoms.
FOR 40 points!!!! I need the whole page finish !!!!!! Pleaseeeeee!!!!!!! I will five u brainlist !!!!!!
2. Stronger intermolecular forces =______ boiling point
Stronger intermolecular forces = higher boiling point
The stronger the intermolecular forces, the harder the molecules are to pull/break apart, which means a higher boiling point.
What does the presence of tiny crystals in a piece of igneous rock tell you about it?
Answer:
Neron po bang story o wala poh
How many liters are in 100g of CoCl2
Is it 579.60L
is it 29.08 L
Is it 23.73 L
Is it 17.25 L
Answer:
17.25 L
Explanation:
I converted 100g into moles and converted the amount of moles into L.
1 mole is equal to 6.023 × 10 ²³ molecules.17.25 Liters are in 100 grams of COCl₂. Therefore, option D is correct.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
The mole concept can be used to convert between mass and number of particles.
1 gram of COCl₂ = 0.00770 mole
100 gram COCl₂ = 0.770 mole
To convert gram into litre multiply by 22.4
= 0.770 × 22.4
= 17.25 Litre
Thus, 17.25 Liters are in 100 grams of COCl₂, option D is correct.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ2
What is the name of this isotope? P-17 N-22
Answer:Chlorine
Explanation:
This isotope is Chlorine because an atom with 17 protons will always be chlorine, just as an atom with 1 proton will always be hydrogen, for example
Five moles of trucks would be____trucks.
Answer:
3.02x10²⁴
Explanation:
To solve this problem we need to use Avogadro's number: It is the number of units (usually atoms or molecules, in this case it's trucks) contained in one mol: 6.023x10²³.
We multiply the given number of moles times Avogadro's number:
5 * 6.023x10²³ = 3.02x10²⁴
So five moles of trucks would be 3.02x10²⁴ trucks.
Which characteristic describes the traposphere
Answer:
It is the wettest layer of the atmosphere.It extends upto 10km upward from sea level.
Define unknown solutions
Answer:
A titration is a technique where a solution of known concentration is used to determine the concentration of an unknown solution. Typically, the titrant (the know solution) is added from a buret to a known quantity of the analyte until the reaction is complete
Are substances that taste bitter and feel slippery to the skin
Answer:
Explanation:
Bases are the substances which have a bitter taste and feel slippery.Sulfuric acid is the most widely made industrial chemical in the world. It is used to make many products, including paper, paint, detergents, and fertilizers. Car batteries contain sulfuric acid. Feel The properties of a base solution include a bitter taste and a slippery feel.Question 5 of 10
What kind of land feature is shown at point on this topographic map?
A. Alake
B. A gentle slope
C. A mountaintop
D. A steep slope
Answer:A
Explanation:
gentle slope
A screw decreases the amount of work done.
True
False
Answer:
tru
Explanation:
2. Find the molar mass for:
FeCl2 • 5H20
Answer:
Molar mass = 216.8254 (approx.)
Explanation:
Given:
FeCl2 • 5H20
Find:
Molar mass
Computation:
Atomic mass
Fe = 55.845
Cl = 35.453
H = 1.00794
So,
FeCl2 • 5H20
55.845 + 2(35.453) + (2)5(1.00794) + 5(15.999)
55.845 + 70.906 + 10.0794 + 79.995
Molar mass = 216.8254 (approx.)
How many minutes are in 180,0 days?
Answer:
259,200 minutes
Explanation:
What is the phenotype of a plant with the genotype RR?
Red
White
O
Pink
Answer:
This question is incomplete, but it can be answered based on general knowledge of the topic. The answer is RED
Explanation:
This question is describing a gene that codes for color. The allele for red color is R while that of white is r, however, these two alleles exhibit incomplete dominance to form an intermediate phenotype that is PINK (Rr).
Since the heterozygous is pink color, it will take two red alleles to make a plant phenotypically red i.e RR. Note that, genotype "rr" will be white.
Please help!! I'll name you brainliest!!
Answer:
H20 Covalent bond
Kl Ionic bond
NaBr ionic bond
Co2 Covalent bond
MgCl2 ionic bond
HCl Covalent bond
Explanation:
Suppose you weigh the unknown substance on an electronic balance and find it has a mass of 445 grams. Analyzing the products of decomposition, you find that the masses of the elements in the sample are 232 grams of carbon, 58 grams of hydrogen, and 155 grams of oxygen. Finally, through further experimentation, you determine that the molar mass of the compound is 46.07 grams/mole.
Calculate the amount, in moles, of each component element in your substance. Use the periodic table to help you find the necessary molar masses.
____ moles of carbon
____ moles of hydrogen
____ moles of oxygen
Answer:
19.32 = moles of carbon
57.54 = moles of hydrogen
9.69 = moles of oxygen
Explanation:
232 g carbon × 1 mol C / 12.011 g C= 19.32 mol C
58 g hydrogen × 1 mol H / 1.008 g H = 57.54 mol H
155 g oxygen × 1 mol O / 15.999 g O = 9.69 mol O
How many moles of bromine are needed
Answer:
8.0 moles
Explanation:
4 Fe + 6 H₂O + 3 O₂ → 4 Fe(OH)₃
Police found 10 grams of Fe(OH)₃ on the knife. Convert grams of rust (Fe(OH)₃) into grams of iron (Fe) to see if the knife contained enough to murder the butler.
345 g Fe
5.22 g Fe
7.34 g Fe
2.95 g Fe
Which of the following is the best representation of a heterogeneous mixture ?
A; sand and water
B; perfume
C; Gatorade
D; koolaid and water
Answer:
a)
Explanation: