Express the answers to the following operations with the proper number of significant figures.

4. 108 x 5. 3

____ X 10^

Diatomic elements are molecules composed of two atoms of the same element covalently bonded together, as opposed to other elements which are composed of only one atom.

Diatomic elements are those elements that exist in nature as molecules made up of two atoms. Examples of diatomic elements include oxygen (O2), hydrogen (H2), nitrogen (N2), fluorine (F2), chlorine (Cl2), and iodine (I2). These elements are the only elements that exist naturally as diatomic molecules.

This gives diatomic elements distinct properties compared to other elemental substances, such as having two different electron configurations, and having different spin states. Diatomic elements also have properties that are unique to them, such as having different boiling points, higher densities, and different reactivity. Additionally, diatomic elements are essential for life as many are used in crucial biochemical processes.

To know more about Diatomic elements click-

https://brainly.com/question/29078214
#SPJ4

The student is to weigh out 94.5g of glycerol in accordance with the provided statement.

Glycerin is a kind of carbohydrate known as a polyol, along with other sugar alcohols including sorbitol and erythritol. Glycerin has a complex taste, but unlike sugar I've already discussed—it is not absorbed by the body as sugar and does not raise blood sugar levels. Glycerol may be safe for short-term treatment when taken orally. Headaches, lightheadedness, bloat, nausea, and diarrhea are possible side effects. Glycerol appears to be safe when used topically. It might result in burning, itching, and redness.

1mL = 1cm³

Quantity = 75mL = 75cm³

1.26 g/cm³ is the density.

Mass = ?

Mass is equal to the product of volume and density.

Mass = 1.26 * 75 = 94.5g

To know more about Glycerol visit:

https://brainly.com/question/12093510

#SPJ4

The complete question is-

A chemistry student needs 75.0 mL of glycerol for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of glycerol is 1.26 g.cm⁻³. Calculate the mass of glycerol the student should weigh out. Be sure your answer has the correct number of significant digits.

The three missing elements in the periodic table are gallium, germanium and scandium.

Gallium, germanium, and scandium have been all unknown in 1871, however, Mendeleev left areas for every and expected their atomic loads and different chemical properties. Within 15 years, the “lacking” factors have been discovered, conforming to the simple traits Mendeleev had recorded. Scientists in Japan suppose they have eventually created the elusive detail 113, one of the lacking gadgets at the periodic table of factors. Element 113 is an atom with 113 protons in its nucleus — a kind of depend that should be created inner a laboratory as it isn't always located evidently on Earth.

The elements are gallium, germanium and scandium.

To learn more about periodic table check the link below:

https://brainly.com/question/15987580

#SPJ4

The heat in joules is released when 25. 0 g of water (C = 4. 184 J/g°C) is cooled from 80. 0°C to 30. 0°C is -5210 J

To find the amount of heat released when a substance is cooled, we can use the equation:

q = mcΔT

where q is the amount of heat (in joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in joules per gram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).

Given the information in the question, we have:

m = 25.0 g

c = 4.184 J/g°C

ΔT = 30.0°C - 80.0°C = -50.0°C

So, we can substitute these values into the equation and get:

q = (25.0 g)(4.184 J/g°C)(-50.0°C)

q = -5210 J

Therefore, the amount of heat released when 25.0 g of water is cooled from 80.0°C to 30.0°C is -5210 J.

A negative sign means the heat is absorbed during the cooling process, it is an endothermic process.

Learn more about the calculation of heat transfer here: https://brainly.com/question/10670781

#SPJ4

The correct answer is:Only statements 1 and 2 are correct.

1) The bond is planar.

2) There is free rotation about the carbonyl carbon and nitrogen bond.

The bond is planar: True, Peptide bond is a planar bond because it is composed of a double bond between the carbonyl carbon and nitrogen, and the atoms on either side of the double bond are sp2 hybridized. There is free rotation about the carbonyl carbon and nitrogen bond: True, the peptide bond between amino acids in a protein is a single bond, which allows for rotation about the bond, this is one reason proteins can adopt many different conformations.There is substantial double-bond character to this bond: False, the peptide bond is actually a single bond, although it has some double-bond character, it is not a double bond.There is a net negative charge on nitrogen and net positive charge on oxygen: False, both nitrogen and oxygen atoms in a peptide bond are neutral, as there is no charge separation in the bond.

To learn more about typical peptide here:

https://brainly.com/question/15578006

#SPJ4

Yes, if we add a lot of H₂, the value of K will start falling, which will cause the reaction to move forward. The minimum pressure of H₂ needed to reverse it is 3.598atm.

The force applied per area is referred to as pressure.

ΔG° = -RT ln(K)

34000 = 8.314(273 + 1126)ln(K)

ln(K) = 2.9231

K = [tex]e^{2.9231}[/tex] = 18.834

Since the container doesn't contain any H₂ gas, K will therefore start out at infinity. The reaction will move in the opposite direction in order to reach equilibrium. Consequently, the pressure of N₂ will initially rise.

Yes, if we add a lot of H₂, the value of K will start falling, which will cause the reaction to move forward.

The answer is therefore yes.

K = (5.97)²/0.0406(PH₂)³

K = 3.598atm.

To know more about pressure visit:

https://brainly.com/question/14760196

#SPJ4

Helium: The new volume of the balloon is 0.6182 L.

Colorless, odourless , tasteless, inert, non-toxic helium is a monatomic gas. It is the lightest element in the periodic table and the second most abundant element in the universe.

The new volume of the balloon can be calculated using the ideal gas law, which states that PV = nRT, where P is the n represents the number cubic moles of gas, V represents the volume, R is the real gases constant, and the temperature is T.

First, we need to calculate the number of moles of helium in the balloon after the additional 0.670 grams have been added:
n = 0.670 g He/4.003 g/mol = 0.167 mol

The total number of moles in the balloon is now 0.267 mol. We can use the ideal gas law to calculate the new volume:

V = (0.267 mol)(0.0821 L·atm/K·mol)(273 K)/1 atm = 0.6182 L

To learn more about Helium
https://brainly.com/question/24402295
#SPJ4

Answer:

both are only physical changes

Answer:both are only chemical

Explanation:

Remove dry chemicals. Remove contaminated clothing or jewelry. Bandage the burn. Rinse again if needed.

A chemical burn is infection and destruction of human tissue because of exposure to a chemical, generally with the aid of direct contact with the chemical or its fumes. Chemical burns can occur in the domestic, at work or school, or as a result of an twist of fate or assault. although few humans in the united states of america die after contact with chemical substances in the home, many substances not unusual in both living and garage areas can do extreme damage.

To know more about chemicals click here

https://brainly.com/question/26487468

#SPJ4

Answer: It is a Covalent Bond

Explanation:

In a chlorine molecule, the atoms bonded by a covalent bond as a chlorine atom needs one electron to complete its octet and shares one electron with another chlorine atom.

Answer:

mono covalent bonds

Explanation:

Cl shares 1 electron with another Cl atom

so it makes Cl2 a mono covalent compound

Titration is a quantitative analysis method for determining the concentration of a substance from a measured titrant. According to the equation, if the reactants are halved, the amount of H2O produced will be halved.

The molecular equations for sodium hydroxide, hydrochloric acid, sodium chloride, and water can be expressed as:

 HCl + NaOH ⇒ NaCl + [tex]H_{2}[/tex]O

In the given equations, the spectator ions and the ionic equation can be distinguished as follows:

H⁺ + Cl⁻ Na⁺ + OH⁻ ⇒ Na⁺ + Cl⁻ + 2H⁺ + O⁻²

The net ionic equation is:

 H⁺ + OH⁻ ⇒ [tex]H_{2}[/tex]O

From the above equation, we can see that the production of water molecules depends on the number of reactants. The reactants are,

H⁺ and OH⁻.

Therefore, when the number of reactants is halved, the resulting water molecules are halved.

Learn more about reactants visit:

brainly.com/question/29035733

#SPJ4

25 grams of a substance is equivalent to 0.0088 moles. To calculate the number of moles, the following equation can be used:

Number of moles = mass (in grams) / molar mass

The molar mass is the mass of 1 mole of a substance and is expressed in grams/mol. It is equal to the sum of the atomic masses of all the atoms in a molecule.

To calculate the number of moles from 25 grams, the molar mass of the substance must be known. Once the molar mass is known, the equation can be used to calculate the number of moles.

For example, if the substance is sodium chloride (NaCl), the molar mass is 58.44 g/mol. Applying the equation above, the number of moles can be calculated as 25 g / 58.44 g/mol = 0.0088 moles.

In conclusion, 25 grams of a substance is equal to 0.0088 moles. The molar mass of the substance must be known to calculate the number of moles from a given mass.  Once the molar mass is known, the equation can be used to calculate the number of molecules.

Learn more about moles:

https://brainly.com/question/28037816

#SPJ4

The sodium is the anode of the cell while the magnesium is the cathode of the cell.

We know that in the cell, we are going to have just about two electrodes in the cell and we would have the cathode and the anode. We have to know that the cathode is the point by which the current would enter the cell and the cathode is the point from which the current would leave the cell.

Having said this, we should know that the investigation would have to take into account the reduction potentials of the magnesium as well as that of the sodium as these can be used in the construction of the cell that is under study here.

Hence, by consideration of the electrode potentials, we can see that the sodium would have to act as the anode of the cell and we would keep up with the magnesium as the cathode of the cell.

Learn more about cathode:https://brainly.com/question/4052514

#SPJ1

the oxidation number of the oxygen atoms in h2o2 and the oxidation number of the oxygen atoms in o2 is -1 and 0

An atom's oxidation number (also known as oxidation state) in a chemical is an amount that represents the amount of electron density gained or lost by the atom during in the formation of the compound. In general, the oxidising number of an element in a compound can be determined using the following rules: n element's oxidising number is null whenever it is unrestricted (uncombined). The oxidation number of a polyatomic ion is equivalent towards the ion's charge. We can use these rules to calculate the oxidation number of the oxygen atoms in H2O2 and O2: In H2O2, the oxidation number of the oxygen atoms is -1. This is because the compound is neutral and the hydrogen atoms have an oxidation number of +1, so the oxygen atoms must have an oxidation number of -1 in order for the sum of all the oxidation numbers to be zero. In O2, the oxidation number of the oxygen atoms is 0. This is because the compound is a diatomic molecule and the oxidation number of the free element oxygen is 0.

Learn more about oxidation state here:

https://brainly.com/question/29770145

#SPJ4

The elements belonging to group 1 are more reactive than elements belonging to group 2.

The elements that belongs to s block elements are hydrogen (H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). The nature of alkali metals is soft and shiny in appearance. They have low melting point and are highly reactive in nature and usually tarnish when exposed to air. Sodium (Na) is the most reactive element since it's valence electrons are not tightly held together in the atom. The three elements that are highly reactive are Lithium (Li), Sodium (Na), and potassium (K). The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive.

To learn more about alkali metals check the link below:

brainly.com/question/15220625

#SPJ4

Pyruvate is converted to lactate in anaerobic conditions by anaerobic glycolysis. During anaerobic respiration, two ATP molecules are produced.

What is the primary step in glycolysis?

The method by which glucose is metabolized to produce energy is known as glycolysis. It generates water, ATP, NADH, and two pyruvate molecules. It doesn't need oxygen to happen because it happens in a cell's cytoplasm. Both in aerobic and anaerobic organisms, it happens.

How is glycolysis referred to?

Gustav Embden, Otto Meyerhof, & Jakub Karol Parnas identified the Embden-Meyerhof-Parnas (EMP) pathway, which is the most typical kind of glycolysis. The Entner-Doudoroff pathway and several heterofermentative & homofermentative pathways are examples of additional pathways that are included in the term "glycolysis."

To know more about glycolysis visit:

https://brainly.com/question/14076989

#SPJ4

In anaerobic circumstances, anaerobic glycolysis converts pyruvate to lactate. Two ATP molecules are created during anaerobic respiration.

The process of converting glucose into energy is known as glycolysis. Water, ATP, NADH, and two pyruvate molecules are produced. It does not require oxygen to occur since it occurs in the cytoplasm of a cell. It occurs in both aerobic and anaerobic species.

The Embden-Meyerhof-Parnas (EMP) route, which is the most common kind of glycolysis, was discovered by Gustav Embden, Otto Meyerhof, and Jakub Karol Parnas. Additional processes included in the word "glycolysis" include the Entner-Doudoroff pathway and numerous heterofermentative and homofermentative pathways.

Here,

Anaerobic glycolysis converts pyruvate to lactate under anaerobic conditions. During anaerobic respiration, two ATP molecules are produced.

To learn more about glycolysis, go to:

brainly.com/question/14076989

#SPJ4

Addition of soda (Na₂CO₃) to the vitrifying mixture produces glasses with excellent optical properties.

Silica is the common name for the compound silicon dioxide, which consists of one silicon atom and two oxygen atoms. It is an important component of many rocks, sands, and clays, and is also found in many plants and animals. Silica is used in a wide variety of products, from beer and wine to pottery, glass, and paint. It is also used in building materials such as concrete and mortar, and as a food additive. Silica is also used to make silicon-based electronics such as computer chips.

Adding lime (CaCO₃) to the vitrifying mixture creates a jar that can be used to bake or store the liquid medicine.

Addition of alumina (Al₂O₃) to a mixture undergoing vitrification produces a glass that is insoluble in water.

Addition of borax (Na₂B₄O₇) to the mixture during vitrification allows glass to be produced at much lower temperatures.

To know more about silica click-

https://brainly.com/question/28814012

#SPJ4

Equation I cannot be divided by another factor as it will introduce errors in the equation.

Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.

There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.

Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.

Learn more about errors,here:

https://brainly.com/question/15810279

#SPJ1

Answer:

tells you by mass what percent of each element is present in a compound.

Explanation:

5.60 moles of hydrogen gas did Carl and his partner collect if they collected 5. 6L.

The mole, also called Avogadro's number, is a unit of measurement used in chemistry to express the amount of matter. It is defined as the number of entities (atoms, molecules, ions, etc.) in a given sample of matter. The number of mole entities is known as Avogadro's number and is approximately 6,022 x 10²³. Moles can also be used to represent the number of units of matter in a chemical reaction. For example, the equilibrium equation for the reaction of magnesium and hydrochloric acid is Mg + 2HCl → MgCl₂ + H₂. This equation shows that for every mole of magnesium, 2 moles of hydrochloric acid are required to produce 1 mole of magnesium chloride and 1 mole of hydrogen gas.

In summary, a mole is a unit of measurement used in chemistry to describe the amount of substance. It is defined as the number of units in a particular sample of matter and is known as Avogadro's number. It can be used to convert between the mass and number of units of matter, and to describe the number of units of matter in chemical reactions.

To know more about Avogadro's number visit:

https://brainly.com/question/28812626

#SPJ4

Considering the Charles' law and STP conditions, the volume at 100°C is 30.60 L.

Charles' law establishes the relationship between the volume and the temperature of a sample of gas at constant pressure and establishes that when the temperature is increased the volume of the gas also increases and that when cooling the volume decreases.

Mathematically, Charles's law is expressed as:

V÷T=k

where:

V is the volume.

T is the temperature.

k is a constant.

Analyzing an initial state 1 and a final state 2, it is fulfilled:

V₁÷T₁= V₂÷T₂

The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

In this case, you know:

Replacing in Charles' law:

22.4 L÷ 273 K= V₂÷ 373 K

Solving:

(22.4 L÷ 273 K)× 373 K= V₂

30.60 L= V₂

Finally, the final volume is 30.60 L.

Learn more about Charles' law and STP:

https://brainly.com/question/4147359

https://brainly.com/question/29396023

#SPJ1

A large area of the Earth that has a similar climate is not considered a biome.

Hence, option D is correct.

Scientists disagree on the exact number of biomes that exist on earth, therefore we will focus on the six most significant ones: freshwater, marine, desert, forest, grassland, and tundra.

To know more about biome here

https://brainly.com/question/1930321

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex] is 136g.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.

4AI + 3O[tex]_2[/tex]→ 2Al[tex]_2[/tex]O[tex]_3[/tex]

moles of  Al =54/26=2.07

moles of  O[tex]_2[/tex]=64/32=2

Since oxygen is limiting reagent, so product will be according to oxygen

Theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex]=136g

Therefore, theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex] is 136g.

To know more about mole, here:

brainly.com/question/15209553

#SPJ1

1.53 × 10⁻⁵ moles of aspartame are present in 4.50 mg of aspartame.

Two amino acids, aspartic acid and phenylalanine, make up the low-calorie sweetener known as aspartame. In addition to being present in tabletop sweetener packets, aspartame is a common component used to substitute sugar in low-calorie foods and beverages.

Here there are 4.50 mg of aspartame.

First, the mass is converted from mg to g by:

1 g = 1000 mg

So, 1 mg = 0.001 g

So, 4.5 mg = 4.5 × 10⁻³ g

Molar mass of aspartame = 294.40 g/mol

So, Number of moles of aspartame = [tex]\frac{Given mass}{Molar mass}[/tex]

or, n = 4.5 × 10⁻³ / 294.3

or, n = 1.53 × 10⁻⁵ moles.

Hence, 4.50 mg of aspartame has 1.53 × 10⁻⁵ moles of aspartame.

To know more about aspartame from the link

brainly.com/question/26727229

#SPJ4

An alpha particle bombardment of aluminum with an atomic number of 27 results in the production of a neutron and phosphorus 15. The particular isotope formed is aluminum-28.

Fundamental alterations take place at the level of the atomic nucleus during nuclear reactions. Analyze the properties of the neutron, which has a mass similar to that of a proton but no electric charge. As a result, when it interacts with the aluminum core, the atomic number should remain constant but the atomic mass should rise by one unit. The newly produced atom is in an excited state when it transitions to the base state with the emission of a high-energy radiation called a gamma ray. Aluminum-28 isotope is formed.   ⁷A₂₇ + ⁰n₁ → ⁷Al₂₈ˣ

To learn more about isotope click here https://brainly.com/question/21536220

#SPJ4

In a given reaction, the rate may be expressed as either the rate of formation of a product (X) or the rate of consumption of a reactant (Y). If the reaction is proceeding in the forward direction, the rate of formation of the product (X) will be positive and the rate of consumption of the reactant (Y) will be negative.

This means that X is being produced at a faster rate than it is being consumed and Y is being consumed at a faster rate than it is being produced.

Alternatively, if the reaction proceeds in the opposite direction, the rate of formation of products (X) is negative and the rate of consumption of reactants (Y) is positive. This means that X is consumed faster than it is produced, and Y is produced faster than it is consumed.

Learn more about the rate of reaction here: https://brainly.com/question/24795637

#SPJ4

Answer:

Answer Below

Explanation:

Answer: 8.4322×1024atoms atoms are in 1.4 moles of cadmium. Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes.

Answer:

The answer is 8.4308 × 10²³ atoms

Explanation:

Multiply by Avogadro's number (Nₐ)

Nₐ = 6.022 × 10²³ mol⁻¹

Now,

1.4 × 6.022 × 10²³ = 8.4308 × 10²³

Thus, 8.4308 × 10²³ atoms are in 1.4 moles of Cadmium.

a. T-shaped, see-saw, square pyramidal.IF3: The Lewis structure of IF3 consists of a central I atom, which is surrounded by three F atoms.

IF3: The Lewis structure of IF3 consists of a central I atom, which is surrounded by three F atoms. The three F atoms are arranged in a symmetric, T-shaped geometry.

TeF4: The Lewis structure of TeF4 consists of a central Te atom, which is surrounded by four F atoms. The four F atoms are arranged in a symmetric, trigonal planar geometry.

XeF5+: The Lewis structure of XeF5+ consists of a central Xe atom, which is surrounded by five F atoms. The five F atoms are arranged in a symmetric, square pyramidal geometry.

a. T-shaped, see-saw, square pyramidal.

learn more about lewis here

https://brainly.com/question/4144781

#SPJ4

Balanced net ionic equation for a neutralization reaction that results in the formation of sodium fluoride is Na+ + F- → NaF

A neutralization reaction is a chemical reaction that occurs when an acid and a base react to form a salt and water. This type of reaction is exothermic, meaning that it releases energy in the form of heat. During a neutralization reaction, hydrogen ions from the acid are neutralized by the hydroxide ions from the base. The byproduct of this reaction is a salt and water. The salt produced depends on the acid and base used in the reaction, and the pH of the solution is neutralized to 7.0.

To learn more about neutralization reaction
https://brainly.com/question/27745033
#SPJ4

sodium azide (NaN3) is used to inflate the safety airbags in automobiles (g) This airbag should be filled with N2 at a pressure of 1.15 atm and temperature of 26.0°C. It has a volume of 36 L.

Modern automobiles use numerous technical components and subsystems, each of which performs a specific design function. Some of these have thousands of individual pieces and were made possible by new or improved technologies, such as electronic computers, high-strength polymers, and novel alloys of steel and nonferrous metals. Air pollution, safety regulations, and global manufacturer competition, among other things, have all contributed to the development of some subsystems.

With an estimated 1.4 billion in use worldwide, passenger vehicles have become the main form of family transportation. In the United States, where more than three trillion miles (almost five trillion kilometers) are traveled annually, roughly one-fourth of these are located.

Learn more about automobiles here:

https://brainly.com/question/16579482

#SPJ4