The midpoint approximation of an integral is an approximation of the definite integral of a function between two endpoints.
To ensure that the absolute error in approximating the integral is less than 10, you must use an integer value of n such that the absolute error is less than 10.
For example, if n = 10, then the absolute error in the midpoint approximation of the integral will be approximately 9.9449. The absolute error at n = 10 can be expressed to four decimal places as 9.9449.To reduce the absolute error further, increase the integer value of n. For example, if n = 20, then the absolute error in the midpoint approximation of the integral will be approximately 4.8775. The absolute error at n = 20 can be expressed to four decimal places as 4.8775.
The tolerance is +/-0.0001%, so you must increase the value of n until the absolute error is less than or equal to 0.0001%. For example, if n = 32, then the absolute error in the midpoint approximation of the integral will be approximately 0.0005. The absolute error at n = 32 can be expressed to four decimal places as 0.0005.
In conclusion, to ensure that the absolute error in approximating the integral by the midpoint approximation is less than 10, you must use an integer value of n such that the absolute error is less than 10. Increasing the value of n will reduce the absolute error, and you must continue increasing the value of n until the absolute error is less than or equal to the tolerance of +/-0.0001%.
For more such questions on midpoint approximation
https://brainly.com/question/2257264
#SPJ11
Examine the following code: CREATE OR REPLACE PROCEDURE update sal(v emp id NUMBER, v increment NUMBER) BEGIN UPDATE emp SET salary- salary +v increment WHERE employee id-v_emp_iod; END update_sal; CREATE OR REPLACE PROCEDURE do update (b emp id NUMBER, b increment NUMBER) BEGIN update_sal (b emp id, b increment); END do_update; After compiling the two procedures, you invoke the do update procedure using the following code: EXECUTE do update (12, 5000); Which statements are correct with reference to this code? (Choose all that apply.) A. The b _emp id and b_increment parameters are actual parameters for the do update procedure. B. The b emp id and b increment parameters are actual parameters for the update sal procedure. C. The b emp id and b increment parameters are formal parameters for the update sal procedure. D. The v emp id and v increment parameters are actual parameters for the update sal procedure. E. The v emp_ id and v_increment parameters are formal parameters for the update sal procedure.
A, C, and E are correct with reference to the given code. This code has two actual parameters: 12 (b_emp_id) and 5000 (b_increment).
These parameters are passed to the do update procedure and then forwarded to the update sal procedure. The update sal procedure has two formal parameters: v_emp_id and v_increment. These parameters receive the values 12 and 5000 respectively and update the emp table in the database.
In conclusion, A, C, and E are correct with reference to the code. A is correct because the b_emp_id and b_increment parameters are actual parameters for the do update procedure. C is correct because the b_emp_id and b_increment parameters are formal parameters for the update sal procedure.
Lastly, E is correct because the v_emp_id and v_increment parameters are formal parameters for the update sal procedure. So, A, C, and E are correct with reference to the given code.
for more such questions on parameters.
https://brainly.com/question/30384148
#SPJ11
which of the following is an example of a relative reference in excel? question 4 options: b$7 b7 $b7 $b$7
In Microsoft Excel, a relative reference is a cell reference that changes when you copy the formula to another location. Among the given options, the example of a relative reference in Excel is "b7".
When you copy a formula with a relative reference, the reference will change relative to the new location of the formula. For instance, if you copy the formula "=B72" from cell A1 to cell A2, the formula in A2 will change to "=B82" because the reference in the formula is relative to the new location of the formula. In contrast, an absolute reference remains constant regardless of where the formula is copied. To make a reference absolute, you can add a dollar sign ($) before the column and row reference
Find out more about Microsoft Excel
brainly.com/question/24202382
#SPJ4
difference between multimedia and ordinary text
Answer:
Multimedia uses a combination of different forms of media such as text, images, audio, video, and animations to communicate information and engage an audience, while ordinary text only uses written or typed words. Multimedia is often more engaging and immersive, while ordinary text is more straightforward and accessible. The choice between multimedia and ordinary text depends on the context, audience, and purpose of the content.
Explanation:
Multimedia refers to any content that uses a combination of different forms of media such as text, images, audio, video, and animations to convey information or engage an audience. In contrast, ordinary text refers to content that consists of words and sentences that are written or typed.
The key differences between multimedia and ordinary text are:
Types of media used: Multimedia combines different types of media, including text, images, audio, video, and animations. In contrast, ordinary text only uses written or typed words.
Communication of information: Multimedia is often used to communicate complex ideas or information in a more engaging and interactive way. Ordinary text is typically used to convey information in a more straightforward and concise manner.
Engagement: Multimedia content is often more engaging than ordinary text because it appeals to different senses and offers a more immersive experience. It can capture the attention of the audience and hold their interest for longer periods. Ordinary text, on the other hand, may be less engaging and may require more effort on the part of the reader to maintain interest.
Accessibility: Ordinary text is typically easier to access and consume than multimedia content, as it only requires basic reading skills. Multimedia content, on the other hand, may require more advanced technology and skills to access and use.
In summary, multimedia offers a more dynamic and engaging way to communicate information, while ordinary text is a more straightforward and accessible method for conveying information. The choice between multimedia and ordinary text will depend on the context, audience, and purpose of the content.
which of the following is an example of the type of data that advertising networks automatically collect and share with businesses?
Answer:
The answer would "the cost of each ad you publish".
Explanation:
Please like my answer if you happy and give me a crown
14.
(05.03 MC)
Which example of the always secure design principle states that the resiliency of software and devices against attacker attempts depends heavily on the protection of its at risk components? (5 points)
Psychological acceptability
Complete mediation
Separation of privilege
Weakest link
15.
(05.03 LC)
Which principle states that the confidentiality of a system should remain even when availability is interrupted? (5 points)
Failsafe defaults
Complete mediation
Open design
Weakest link
16.
(05.03 LC)
Which principle states that if the design is highly complex, chances are good that security vulnerabilities increase? (5 points)
Open design
Weakest link
Economy of mechanism
Failsafe defaults
17.
(05.03 LC)
Which key soft skill involves evaluating evidence with an open mind? (5 points)
Critical thinking
Communication
Teamwork
Enthusiasm
18.
(05.03 LC)
Darren was assigned a big project planning a new network for his company. The network will connect several computers throughout a building. Which type of hard skill will he need in this situation? (5 points)
Virtual private network
Local area network
Wide area network
Private area network
19.
(05.03 LC)
What is one method attackers might use to smuggle hidden messages within an unsuspecting file? (5 points)
Copyright
Encoding
Network steganography
Digital encryption
20.
(06.01 MC)
Jackson just started working for a large technology company and received a list of rules that must be followed. He must sign an agreement that he will follow these rules before he can start his job. Which term best describes this agreement? (5 points)
Methods
Procedures
Regulations
Recommendations
21.
(06.01 LC)
________ is the government agency responsible for creating and monitoring safe workspaces in the United States. (5 points)
FDA
DOE
OSHA
USDA
22.
(06.02 LC)
Sarah has ambition and drive to create innovative products and set her own working hours. What type of career opportunity should Iris consider? (5 points)
Mentorship
Leadership
Practicum
Entrepreneurship
23.
(06.03 LC)
Peter has some job experience, but he took some time off to travel and visit friends. Which résumé format should he avoid using due to gaps in his employment history? (5 points)
Video
Combination
Chronological
Functional
24.
(06.03 LC)
Which résumé format would be a good fit for individuals with little to no work experience? (5 points)
Chronological
Video
Functional
Combination
25.
(06.03 LC)
Amy abbreviated the date as 10.27.21 in her business letter. After proofreading her letter, she realized the date format was incorrect. What is the correct format for the date? (5 points)
An essential component of an information system, _____, is defined as facts or observations about people, places, things, and events.An information system consists of people, procedures, hardware, software, and _____.In addition to numbers, letters, and symbols, _____ also includes video, audio and photographs.
An essential component of an information system data is defined as facts or observations about people, places, things, and events.
What is Data?Data can be in three different states: at rest, in motion, and in use. In most circumstances, data in a computer moves in parallel. In most circumstances, data travelling to or from a computer moves as serial data. An analog-to-digital converter can convert analogue data from a device, like a temperature sensor, to digital data. Data that a computer uses to conduct operations on amounts, letters, or symbols is saved and recorded on magnetic, optical, electronic, or mechanical storage media and sent as digital electrical or optical signals. Peripheral devices are used by computers to transfer data in and out.A physical computer memory element consists of a storage byte or word and an address.
To know more about Data,click on the link :
https://brainly.com/question/13650923
#SPJ1
Identify the correct syntax to create a linked list of Integer values.
Group of answer choices
LinkedList<> linkedList = new Integer LinkedList;
LinkedList linkedList = new LinkedList (Integer);
LinkedList linkedList = new LinkedList();
Integer LinkedList linkedList = new LinkedList();
This statement creates a new LinkedList object that stores Integer values. LinkedList linkedList = new LinkedList().
How should a linked list be created using the correct code?Structure and pointers can be used to implement a linked list in C. struct LinkedList *next, struct LinkedList int data, and; Each node in the list is made using the aforementioned definition. The element is stored in the data field, and the following is a pointer to the address of the following node.
How is a linked list with values declared?Initially, a LinkedList of type String is declared. Next, to add values to the LinkedList, we utilise different iterations of the add method, such as add, andFirst, addLast, addAll, etc. Thus, we may add the component right.
To know more about LinkedList visit:-
https://brainly.com/question/22786070
#SPJ1
Given integer variables seedVal, smallestVal, and greatestVal, output a winning lottery ticket consisting of three random numbers in the range of smallestVal to greatestVal inclusive. End each output with a newline.
Ex: If smallestVal is 30 and greatestVal is 80, then one possible output is:
65
61
41
how do i code this in c++?
Answer:
Explanation:
Here's an example code in C++ that generates a winning lottery ticket consisting of three random numbers in the range of smallestVal to greatestVal:
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
int main() {
int seedVal, smallestVal, greatestVal;
cout << "Enter seed value: ";
cin >> seedVal;
cout << "Enter smallest value: ";
cin >> smallestVal;
cout << "Enter greatest value: ";
cin >> greatestVal;
// Seed the random number generator with the user-input seed value
srand(seedVal);
// Generate three random numbers in the range of smallestVal to greatestVal
int lottery1 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
int lottery2 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
int lottery3 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
// Output the winning lottery ticket
cout << lottery1 << endl;
cout << lottery2 << endl;
cout << lottery3 << endl;
return 0;
}
This code prompts the user to enter a seed value, the smallest and greatest values for the range of the lottery numbers. It then seeds the random number generator with the user-input seed value, generates three random numbers using rand() % (greatestVal - smallestVal + 1) + smallestVal to ensure the numbers fall within the range of smallestVal to greatestVal, and outputs the results on separate lines with a newline character.
the following circuit connects the output of a comparator (u1a) to an led (d1). which of the following condition is correct? g
The following circuit connects the output of a comparator (U1A) to an LED (D1). The condition is correct.
To determine if the condition is correct, we must examine the circuit and the functionality of the components. U1A is a comparator, meaning it takes two inputs and compares them. If the input voltage of U1A is higher than the reference voltage, U1A's output will be high (1). D1 is an LED, meaning when it is activated it will produce light. In this circuit, D1 is connected to U1A's output. Therefore, if U1A's output is high, the LED will be activated, and if U1A's output is low, the LED will not be activated.
To determine if the condition is correct, we must consider the logic of the circuit. If U1A's input voltage is higher than the reference voltage, U1A's output will be high and the LED will be activated. Therefore, the given condition is correct.
For such more questions on circuit :
brainly.com/question/28655795
#SPJ11
Which of the following statements about the use of an organization's code of ethics is not true? a. The code of ethics must continually be applied to a company's decision-making processes and emphasized as an important part of its culture. b. Breaches in the code of ethics must be identified and dealt with appropriately O c. An effective code of ethics helps ensure that employees abide by the law, follow necessary regulations, and behave in an ethical manner d. An organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
An effective code of ethics helps ensure that employees abide by the law, follow necessary regulations, and behave in an ethical manner. The code of ethics applies to all individuals in the organization, including board of directors.
An organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
A code of ethics outlines the values, principles, and conduct standards that govern an organization's behavior. The purpose of a code of ethics is to establish a foundation of ethical behavior for all members of the organization to follow.
Therefore, it must apply to all members of the organization including the board of directors. It is not true that an organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
For such more question on ethics:
https://brainly.com/question/20264892
#SPJ11
given the array declaration, int a[20]; the last element is written as: group of answer choices a[1] a[0] a[19] a[20]
The array declaration int a[20] creates an integer array a with a length of 20. In most programming languages, including C and C++, arrays are zero-indexed, which means that the first element of the array has an index of 0, and the last element has an index of length-1.
Therefore, the last element of the array a can be accessed using the expression a[length-1].
In this case, the array a has a length of 20, so the last element is at index 20-1 = 19. Thus, the correct way to access the last element of the array a is to use the expression a[19]. Attempting to access the element a[20] would result in accessing a memory location outside the bounds of the array, which can cause undefined behavior or program crashes.
To know more about array click here:
brainly.com/question/30757831
#SPJ4
Differentiate between ICT and ICTs
ICT refers to the field of information and communication technologies as a whole, while ICTs refer to the individual technologies within that field such as computers, smartphones, and the internet.
What is internet?
The internet is a global network of interconnected computers and servers that communicate with each other using standard communication protocols, allowing people to access and share information and communicate with each other across geographical distances.
ICT stands for Information and Communication Technology, which is a term used to describe the combination of technologies used to manage and communicate information.
ICTs, on the other hand, stands for Information and Communication Technologies, which refers to the specific devices, tools, and technologies used for communication and information management, such as computers, smartphones, the internet, and various software and applications.
In summary, ICT is a broader term that encompasses various technologies used for managing and communicating information, while ICTs are specific technologies that fall under the ICT umbrella.
To know more about software visit:
brainly.com/question/1022352
#SPJ1
Which of the following is one way that a company could enhance their security and privacy to protect their intellectual property?
For the CPT code assignment 44970, which of the following coding references can be accessed from the coding summary screen? Select all that apply. Coder's Desk Reference for Procedures CPT CPT Assistant DRG Anesthesia Crosswalk HCPCS
The CPT code assignment 44970 can be accessed from the coding summary screen of the following coding references: Coder's Desk Reference for Procedures CPT, CPT Assistant, DRG Anesthesia Crosswalk, and HCPCS.
For the CPT code assignment 44970, the coding references that can be accessed from the coding summary screen are as follows: CPT, CPT Assistant, and Anesthesia Crosswalk.
The Current Procedural Terminology (CPT) is a medical code set that is used to describe medical, surgical, and diagnostic services performed by healthcare professionals.
The codes are utilized for reimbursement purposes by insurance companies and other third-party payers. CPT codes are regularly updated to reflect new technologies and clinical advancements.
For such more question on coding:
https://brainly.com/question/30130277
#SPJ11
Which of the following is a measurement of the maximum amount of data that can be transferred over a particular network segment?
Answer:
When you purchase bandwidth, a specification for the volume of data transferred over time, such as Mbps, gigabits, etc., is typically included. That is the speed in theory. Measure the actual speed.
Explanation:
Network bandwidth refers to the maximum rate at which data may be transmitted via a wired or wireless communications link in a specific amount of time. The amount of bits, kilobits, megabits, or gigabits that can be transmitted in a second is typically used to describe bandwidth.
if you happy for my answer please like and give me a crown :)
What is the difference between phishing and spoofing?
Answer:
Phishing and spoofing are two common types of online scams that are used to deceive people into giving away sensitive information. Although both terms are often used interchangeably, they refer to distinct types of attacks.
Phishing is a type of scam that involves the use of fraudulent emails, text messages, or websites that are designed to look like legitimate communications from reputable companies or individuals. The purpose of phishing is to trick people into providing personal information such as passwords, credit card numbers, or social security numbers. Phishing scams can be quite sophisticated, often using social engineering tactics to gain the trust of their victims.
Spoofing, on the other hand, is a broader term that refers to any act of impersonation or deception. In the context of online security, spoofing can refer to several types of attacks, including email spoofing, IP spoofing, and website spoofing. Email spoofing involves sending emails that appear to come from a trusted source, while IP spoofing involves changing the source IP address of a network packet to hide the true origin of the communication. Website spoofing involves creating fake websites that mimic legitimate sites in order to deceive users into giving away personal information.
Phishing is a specific type of spoofing that involves using fraudulent communications to trick people into giving away sensitive information. Spoofing, on the other hand, is a broader term that can refer to any act of impersonation or deception, including phishing.
Phishing is a type of cyber attack that involves sending fraudulent emails or messages to trick individuals into revealing sensitive information, such as passwords or credit card numbers.
What is cyber attacks?Any offensive maneuver that targets computer information systems, computer networks, infrastructures, personal computer devices, or smartphones is referred to as a cyberattack.
Both phishing and spoofing are types of cyber attacks used to steal sensitive information or money from unsuspecting victims. While they are similar in nature, they have some significant differences.
Phishing attacks frequently appear to be from legitimate sources, such as banks or social media platforms, and will frequently include a sense of urgency to compel people to act quickly.
Spoofing, on the other hand, is a type of cyber attack in which a malicious entity or individual impersonates a legitimate entity or individual in order to gain access to sensitive information or carry out malicious activities.
Thus, the main difference between the two is that phishing involves tricking individuals into revealing sensitive information, while spoofing involves impersonating a legitimate entity or individual in order to gain access to sensitive information or to carry out malicious activities.
For more details regarding cyberattacks, visit:
https://brainly.com/question/30093347
#SPJ5
which of the following disk maintenance utilities locates and disposes of files that can be safely removed from a disk?
The disk maintenance utility that locates and disposes of files that can be safely removed from a disk is called a disk cleaner. A disk cleaner searches your computer for temporary and unnecessary files, such as temporary internet files, cookies, recently viewed files, and unused files in the Recycle Bin.
Then allows you to remove them. Removing these files can help free up disk space and improve system performance.
The disk maintenance utility that locates and disposes of files that can be safely removed from a disk is Disk Cleanup.Disk Cleanup is a built-in Windows utility that locates and eliminates unneeded files and folders from your hard drive to free up space.
You can use Disk Cleanup to reclaim space on your hard drive by getting rid of temporary files, offline web pages, installer files, and other types of system files that are no longer needed. It's also a good idea to use Disk Cleanup to get rid of files from applications that you're no longer using. By freeing up disk space, you may help your computer run more smoothly.
To open Disk Cleanup on a Windows computer, follow these steps:Open File ExplorerRight-click the drive you want to clean (usually the C: drive) and select Properties. Click the "Disk Cleanup" button on the General tab. In the Disk Cleanup window, select the files you want to delete, and then click OK.
For more such questions on disposes
https://brainly.com/question/30364967
#SPJ11
Note: Upload full question as the question is nowhere available in search engine
Given the following singly-linked list, what will be the value of the curNode's data after the second while loop iteration? students head dalom data Sam a null b. Tom c. Sam d. Tim 45) Which of the following is a linked list with a dummy node? I a head data: mul next data:ips data: Pasta net b. menu head null null list head data: 0 next data: 23 data: 12 met d. menu thead tail data Pina data Chips data Pasta
To answer this question, let's first look at what a singly-linked list is. It is a data structure where each element of the list contains a pointer to the next element in the list.
Here is an example of a singly-linked list:head -> A -> B -> C -> null Each element of the list is represented by a node. The first node in the list is called the head, and the last node in the list points to null. Each node contains a piece of data and a pointer to the next node in the list.Now let's look at the given linked list:head -> a -> null -> b -> Sam -> c -> Sam -> d -> Tim -> null We can see that the list contains four nodes: a, b, c, and d. The value of the cur Node's data after the first while loop iteration is "a", and after the second while loop iteration, it will be "b". This is because we are iterating through the list and checking each node's data against a given value. When we find a node with the given value, we delete it from the list. In the first iteration, we delete the node with the value "Sam", which is the second node in the list. After this deletion, the list looks like this:head -> a -> null -> b -> c -> Sam -> d -> Tim -> nullIn the second iteration, we delete the node with the value "Sam" again, which is the fifth node in the list. After this deletion, the list looks like this:Head -> a -> null -> b -> c -> d -> Tim -> null Therefore, the value of the cur Node's data after the second while loop iteration is "c". Now let's look at the second part of the question. A linked list with a dummy node is a linked list that contains a special node called a dummy node or a sentinel node. This node is not used to store any data, but it is used as a placeholder to simplify the code for certain operations. Here is an example of a linked list with a dummy node:head -> dummy -> A -> B -> C -> null The dummy node is the first node in the list, and it contains no data. Its purpose is to simplify the code for certain operations, such as deleting the first element in the list or inserting an element at the beginning of the list.for more such question on iteration
https://brainly.com/question/28134937
#SPJ11
how can website be used to increase ingagement in a business
Answer:
A website can be a powerful tool for increasing engagement in a business in several ways.
- Providing useful and relevant content.
- Making each visitor's experience personalized.
- Encourage visitors to share your content on social media.
- Offering rewards to customers who engage with your business.
- Creating fun and interactive elements on the website.
find the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015.
The smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015 is $\boxed{4225}$.
We know that $2015 = 5 \cdot 13 \cdot 31$, and $2015$ has $2^2 \cdot 4 = 16$ positive divisors.
To find the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015, we can factor the number into its prime factorization, and multiply some powers of those primes together.
For example, we could take $5^2 \cdot 13 = 325$, which has $(2+1)(1+1) = 6$ positive divisors, just like $2015$. However, 325 and 2015 are relatively prime.
To fix this, we need to multiply by a factor that shares a prime factor with 2015. The only primes we have to work with are 5, 13, and 31. We can't multiply by 5 or 31, because then our number would be greater than 2015.
However, we could multiply by 13. Taking $325 \cdot 13 = 4225$, we have a number with the same number of positive divisors as 2015.
Note that $(2+1)(1+1)(1+1) = 12$, which is different from 16, but we're looking for the smallest such number, and this is the best we can do.
Therefore, the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015 is $\boxed{4225}$.
For such more question on integer:
https://brainly.com/question/29692224
#SPJ11
Which of the following describes a text file containing multiple commands that would usually be entered manually at the command prompt?
It can be used to automate repetitive tasks, elimination the need to manually type in the same commands repeatedly. The commands are stored in the text file, and then the batch file is executed.
This allows the user to perform a task quickly and easily by simply double-clicking on the file. The commands stored in the batch file can include any valid command line instructions, including running programs, copying files, deleting files, and so on. To create a batch file, the user first creates a text file using any text editor. The commands that the user wants to be included in the batch file are then entered into the text file, one line at a time. The file must then be saved in a specific format, usually with a “.bat” file extension. This format tells the computer that the file contains executable commands, as opposed to just a text file. The file is then double-clicked to execute the commands stored in the batch file. Batch files can be used to quickly perform tasks such as creating backups, installing programs, running programs, and so on. They can be used to automate complex or repetitive tasks, saving time and effort. Batch files are also useful for creating shortcuts for frequently used commands.for more such question on elimination
https://brainly.com/question/24078509
#SPJ11
FILL IN THE BLANK to use a field list to add a field to a report, click the ___ button on the format tab to display a field list.
Clicking the Add Existing Fields button on the format tab will display a field list, which may be used to add a field to a report.
How do you add a field list to a query using the Query Tool Design tab's Add Field List button?Click the table or query that includes the field under Tables/Queries. To add a field to the list of Selected Fields, double-click it under Available Fields. The button with the two right arrows (>>) should be clicked if you want to include all fields in your query.
What does an Excel field mean?A field is a type of element where a single piece of data is held, like the received field. Typically, a table's columns carry the values of just one row.
To know more about format tab visit:-
https://brainly.com/question/2986242
#SPJ1
What is information
problem 35 write a query to display the number of products in each category that have a water base, sorted by category (figure p7.35
To display the number of products in each category that have a water base, sorted by category, you can use the following SQL query:
SELECT Category, COUNT(*) AS NumOfWaterBasedProductsFROM ProductsWHERE Base = 'Water'GROUP BY CategoryORDER BY Category;This query uses the SELECT statement to retrieve the Category column and the count of the number of products with a water base for each category. The COUNT(*) function is used to count the number of rows returned by the WHERE clause, which specifies that only products with a water base should be included.The GROUP BY clause is used to group the results by Category, so that the count is calculated for each category separately. Finally, the ORDER BY clause sorts the results by Category in ascending order.This query will return a table showing the number of products with a water base in each category, sorted by category.
To learn more about SQL click the link below:
brainly.com/question/30456711
#SPJ4
The average of three numbers, value1, value2, and value3, is given by (value1 + value2 + value3)/ 3.0. Write a program that reads double variables value1, value2, and value3 from the input, respectively, and computes averageOfThree using the formula. Then, outputs "Average is " followed by the value of averageOfThree to four digits after the decimal point. End with a newline.
Ex: If the input is 2.25 2.0 1.75, then the output is:
Average is 2.0000
Please help!
Answer:
#include <stdio.h>
int main(void) {
double value1, value2, value3;
double averageOfThree;
/* Read 3 double values */
scanf("%lf %lf %lf", &value1, &value2, &value3);
/* Compute the average */
averageOfThree = (value1 + value2 + value3) / 3.0;
/* Output the average */
printf("Average is %.4lf\n", averageOfThree);
return 0;
}
Recommended three ways learners can find out thier learning styles in order to best revise thier work
Q1: Rows of soundwaves in an audio file are:
A. digital audio workspaces.
B. tracks.
C. files.
D. Visualizations.
Q2: Which one of these is NOT a job type commonly performed by a digital media professional?
A. database manager
B. foley artist
C. sound editor
D. production mixer
Answer:
Q1: Rows of soundwaves in an audio file are:
A. digital audio workspaces.
B. tracks.
C. files.
D. Visualizations
ANSWER: B. Tracks.
Q2: Which one of these is NOT a job type commonly performed by a digital media professional?
A. database manager
B. foley artist
C. sound editor
D. production mixer
ANSWER: B. Foley artist
Write a program that inputs the value 437 using each of the scanf integer conversion specifiers. Print each input value using all the integer conversion specifiers.
Given the following values of arr and the mystery method, what will the values of arr be after you execute: mystery()? private int[] arr - (-17, -14, 3, 9, 21, 34); public void mystery() for (int i = 0; i < arr.length / 2; i += 2) arr[i] = arr[i]. 2;
A. {-34, -28, 6, 18, 42, 68}
B. {-17, -14, 3, 18, 21, 34}
C. {-34, -28, 6, 9, 21, 34)
D. {-34, -14, 6, 9, 21, 34}
E. {-34, -14, 6, 9, 42, 34}
The final value of arr will be {-8, -14, 1, 9, 10, 34}, which is closest to option B: {-17, -14, 3, 18, 21, 34}. Therefore, the answer is option B.
The mystery method is dividing the length of the array by 2 and iterating over the array by incrementing i by 2 in each iteration. In each iteration, it's updating the value at index i to be half of its current value.
Starting with the given values of arr: {-17, -14, 3, 9, 21, 34}
In the first iteration, i = 0, and arr[0] will be updated to -8.5, but since it's an integer array, it will be rounded down to -8.
After the first iteration: {-8, -14, 3, 9, 21, 34}
In the second iteration, i = 2, and arr[2] will be updated to 1.5, but since it's an integer array, it will be rounded down to 1.
After the second iteration: {-8, -14, 1, 9, 21, 34}
In the third iteration, i = 4, and arr[4] will be updated to 10.5, but since it's an integer array, it will be rounded down to 10.
After the third iteration: {-8, -14, 1, 9, 10, 34} Option B.
For more such questions on mystery
https://brainly.com/question/30331783
#SPJ11
complete the sentences describing a cycle. during the step, the cpu gets the instruction from memory.
The CPU begins by retrieving certain information and commands (programmes) from main memory and storing them in its own internal temporary memory sections. "Registers" are the name for these memory locations.
What phases comprises a CPU processing cycle?The most fundamental CPU function can be carried out at millions of machine cycles per second by today's CPUs. Three typical steps make up the cycle: fetch, decode, and execute. In some circumstances, the cycle also includes a store.
What are the 4 steps in a CPU process, and what do they do?A processor's four main tasks are fetch, decode, execute, and write back. Fetching is the process of retrieving instructions from system RAM into programme memory.
To know more about CPU visit:-
https://brainly.com/question/30751834
#SPJ1