Find the derivative of f(x) = -2x^3 by the limit process…

Answer:

If the time is 3:45 how many minutes is it slow or fast

(a) There are 20 ways to choose 2 colors without replacement when the order is relevant. (b) There are 10 ways to choose 2 colors without replacement when the order is not relevant.

(a) If the order of the choices is relevant, then we need to use the permutation formula. The number of ways to choose 2 colors from 5, without replacement and with order considered, is given by P(5,2) = 5!/(5-2)! = 5x4 = 20.

(b) If the order of the choices is not relevant, then we need to use the combination formula. The number of ways to choose 2 colors from 5, without replacement and with order not considered, is given by C(5,2) = 5!/(2!3!) = 10.

Learn more about permutation formula here: brainly.com/question/1216161

#SPJ4

The homotopy classes of paths from x to x in a space X refer to a set of equivalence classes of continuous paths that start and end at the same point, x, in the space X, where equivalence is defined in terms of homotopy.

In other words, for any two paths, there exists a continuous transformation (called a homotopy) between them such that the endpoints remain fixed. Two paths are said to be homotopic if they can be continuously deformed into each other while keeping their endpoints fixed. The set of all paths that are homotopic to each other forms an equivalence class.

The homotopy classes of paths from x to x are important in algebraic topology, as they provide a way to study the topological structure of a space by analyzing the properties of the paths within it. They can also be used to define higher algebraic structures such as the fundamental group and higher homotopy groups.

Learn more about paths on;

https://brainly.com/question/17106945

#SPJ1

The real solutions of the following equation are 5 and 1

[ Graph is attached below ]

To solve the given equation graphically we need to find the coordinate points that pass through the graph.

This can be done by taking 'x' values and solving for them 'y' values.  

Now draw the graph using the above coordinates and find the solution as shown below.

Here we have

x³ - 6x²+ 5x = 0  

Let y = x³ - 6x²+ 5x  

To draw the graph find the coordinates of points as follows

At x = 0 =>  y = (0) + (0) + (0) = 0

At x = 1 => y = (1)³ - 6(1)² + 5(1) = 0

At x = -1 => y = (-1)³ - 6(-1)² + 5(-1) = - 12

At x = 2 => y = (2)³ - 6(2) + 5(2) = 6

From the above calculation,

The coordinates of the points to draw the graph are (0, 0), (1, 0), (-1, -12), and (2, 6)

Here the solutions of the graph are the x-coordinate of points where the graph cuts the x-axis

From the figure, the graph will cut the x-axis at 1 and 5  

Therefore,

The real solutions of the following equation are 5 and 1

[ Graph is attached below ]

Learn more about Graphs at

https://brainly.com/question/8210152

#SPJ1

The temperature changed by 41°F during the overnight hours, decreasing from 28°F to -13°F.

The difference in temperature from 28°F to -13°F can be shown in one of two ways:

To calculate the change in temperature, the first exponent equation subtracts the initial temperature from the end temperature. The change in this instance is negative and points to a drop in temperature.

The absolute value function is employed in the second statement to guarantee a positive result regardless of whether the temperature rose or fell. The result is the same as the first expression in this instance, but with a positive sign.

Learn more about Exponents here:

brainly.com/question/5497425

#SPJ1

[tex]80[/tex] billion dollars' worth of net exports were made by China and Germany. The first claim is accurate.

Export is the process of supplying goods and services to some other nation. Contrarily, importing is the act of acquiring goods from outside and transferring them into one's own nation.

The domestic product (GDP) is a measure of all the products and services generated in the United States; thus, changes in exports change significantly in the demand for goods and services made in the United States abroad.

The total of China's and Germany's net exports would be:

[tex]50[/tex] billion + [tex]30[/tex] billion [tex]= 80[/tex] billion

As a result, Germany & China's consolidated net exports amounted to [tex]80[/tex] billion u.s. dollars, reflecting answer option (a).

To know more about exports visit:

https://brainly.com/question/20375046

#SPJ1

Answer:

your answer to the lowest terms

The probability of rolling a sum of 6 with these dice is 1/12.

(a) The general anti-gradient for ∇f(x,y) = (6x + 4y^3, –2 + 12xy^2) is f(x,y) = 3x^2 + 4xy^3 – 2y + C

(b) The general anti-gradient for ∇f(x,y) = (6x/y^2 -2e^-2x, 6x^2/y^3+4y) is f(x,y) = 3x^2/y^2 + e^-2x + 2y^2 + C

(a) To find the general anti-gradient f for ∇f(x,y) = (6x + 4y^3, –2 + 12xy^2), we need to integrate each component of the gradient with respect to its corresponding variable.

Thus, we have

f(x,y) = ∫(6x + 4y^3) dx + C1

f(x,y) = 3x^2 + 4xy^3 + C1

f(x,y) = ∫(–2 + 12xy^2) dy + C2

f(x,y) = –2y + 4x y^3 + C2

where C1 and C2 are constants of integration

Therefore, the general anti-gradient for ∇f(x,y) = (6x + 4y^3, –2 + 12xy^2) is

f(x,y) = 3x^2 + 4xy^3 – 2y + C

where C is an arbitrary constant.

(b) To find the general anti-gradient f for ∇f(x,y) = (6x/y^2 -2e^-2x, 6x^2/y^3+4y), we need to integrate each component of the gradient with respect to its corresponding variable

Thus, we have

f(x,y) = ∫(6x/y^2 -2e^-2x) dx + C1

f(x,y) = 3x^2/y^2 + e^-2x + C1

f(x,y) = ∫(6x^2/y^3+4y) dy + C2

f(x,y) = 3x^2/y^2 + 2y^2 + C2

where C1 and C2 are constants of integration.

Therefore, the general anti-gradient for ∇f(x,y) = (6x/y^2 -2e^-2x, 6x^2/y^3+4y) is

f(x,y) = 3x^2/y^2 + e^-2x + 2y^2 + C

where C is an arbitrary constant.

Learn more about integration here

brainly.com/question/21011607

#SPJ4

The given question is incomplete, the complete question is:

Find the general anti-gradient, f, for the following: (i.e. f was the original function, and you are given the gradient of the function.) (a)  ∇f(x,y) = (6x + 4y^3, –2 + 12xy^2) (b)  ∇f(x,y) = (6x/y^2 -2e^-2x, 6x^2/y^3+4y)

The formula to calculate the percentage of the Sticker Price in column E using structured references would be:

=IFERROR((1-[Sale Price]/[Sticker Price])*100,"% Discount")

A number or quantity can be expressed as a fraction of 100 using a percentage.It is often denoted by the symbol % (percent).

Assuming that the Sticker Price is located in column C and the Sale Price is located in column D, the formula to calculate the percentage of the Sticker Price in column E using structured references would be:

=IFERROR((1-[Sale Price]/[Sticker Price])*100,"% Discount")

In this formula, the percentage of the Sticker Price is calculated by subtracting the Sale Price from the Sticker Price, dividing the difference by the Sticker Price, and then multiply by 100 to convert the result into percentage. The IFERROR function is used to handle any errors that may occur if the Sale Price is missing or is equal to or greater than the Sticker Price. If an error occurs, the formula will display the text "% Discount".

Note that the structured references [Sale Price] and [Sticker Price] refer to the column headers rather than the cell references. This makes the formula more dynamic and easier to read, especially when working with large datasets.

To know more about % Discount visit:

https://brainly.com/question/20885539

#SPJ1

Check the picture below.

gogoggooggoogogogogogogogogogogogg

The cost of the fat-free cottage cheese required in the recipe is R17.98.

How to determine the cost ?

To determine the cost, we first need to calculate the amount of fat-free cottage cheese required in the recipe. The recipe calls for 250g of fat-free cottage cheese, which can be obtained by using 2 units of 125g each. Knowing the cost of ingredients is important for Mrs Gilfillan to price the cake appropriately to cover her costs and make a profit.

What is the cost of the fat-free cottage cheese required to make the Mixed Berry and Almond Polenta Cake recipe that serves 15 espresso cups at Mrs Gilfillan's coffee shop?

The cost of 1 unit of 125g fat-free cottage cheese is R8.99.

Therefore, the cost of 2 units of 125g is calculated as:

R (2 x 8.99) =R 17.98

Hence, the cost of the fat-free cottage cheese required in the recipe is R 17.98.

This cost is in addition to the cost of the other ingredients, such as butter, sugar, ground almonds, mixed frozen berries, and polenta, as well as the cost of labor, overhead, and other expenses involved in making and selling the cake.

To know more about cost visit :

brainly.com/question/30045916

#SPJ1

Answer:

m^2-m-6

Step-by-step explanation:

(m-3)(m+2)

m^2 +2m-3m-6

m^2-m-6

Answer:

m² - m - 6

Step-by-step explanation:

(m - 3)(m + 2)

each term in the second factor is multiplied by each term in the first factor, that is

m(m + 2) - 3(m + 2) ← distribute parenthesis

= m² + 2m - 3m - 6 ← collect like terms

= m² - m - 6

For the triangles to be similar the value of FJ = 9.

Triangles that resemble one another but may not be precisely the same size are said to be comparable triangles. When two items have the same shape but different sizes, they can be considered to be comparable. This indicates that comparable forms superimpose one another when amplified or demagnified. The term "Similarity" refers to this characteristic of like forms.

Let us suppose the value of FJ = x.

Now, for the triangle that are similar the corresponding sides are in proportion.

That is,

FG/FH = FJ/FG

Here, FH = x + 27

Substituting the values we have:

18/x + 27 = x / 18

18(18) = x (x + 27)

x² + 27x - 324 = 0

Splitting the middle term we have:

(x + 36) (x - 9) = 0

x = -36 and x = 9

Since, length cannot be negative we have the value of x = 9.

Hence, for the triangles to be similar the value of FJ = 9.

Learn more about similar triangles here:

https://brainly.com/question/25882965

#SPJ1

Random sampling is crucial when surveying as it ensures that the sample selected is representative of the population.

By randomly selecting participants from the population, the sample is likely to be unbiased on average, which means that the results of the study can be generalized to the entire population. Without random sampling, the results of the study may be skewed or biased towards a certain group, which can lead to incorrect conclusions and poor decision-making. Therefore, it is essential to use random sampling when surveying to obtain accurate and reliable results.

Find out more about Random selection

at brainly.com/question/30135122

#SPJ4

We have proved that quadrilateral ABCD is a square below.

The perimeter of ABCD = 4 × AB

The area of ABCD= (AB)² .

A square is a two-dimensional, four-sided shape with all sides of equal length and all angles of 90 degrees. I

Proof that Quadrilateral ABCD is a Square:

We can prove that quadrilateral ABCD is a square by using the properties of a square.

A square is also a quadrilateral with four equal sides and four right angles.

In the image, we can see that side AB = side CD, and side AD = side BC.

Furthermore, we can see that the angles A, B, C, and D are all right angles=90 degree

This means that the quadrilateral ABCD is a square.

Finding the Perimeter of ABCD:

The perimeter of a square is equal to the sum of its four sides.

In the image, we can see that the sides AB, CD, AD, and BC are all equal. Therefore, the perimeter of ABCD=

4 × AB

= 4 × CD

= 4 × AD

= 4 × BC.

Finding the Area of ABCD:

The area of a square is equal to the length of one of its sides squared. In the image, we can see that the sides AB, CD, AD, and BC are all equal. Therefore, the area of ABCD= (AB)²

= (CD)²

= (AD)²

= (BC)².

For more questions related to quadrilateral

https://brainly.com/question/27991573

#SPJ1

We have proved that quadrilateral ABCD is a square below.

Perimeter of ABCD is 4 × AB

The area of ABCD= (AB)².

A square is a two-dimensional, four-sided shape with equal-length edges and 90-degree angles on each side.

The quadrilateral ABCD is a square, therefore:

Using the characteristics of a square, we can demonstrate that the parallelogram ABCD is a square.

A quadrilateral with four equal edges and four right angles is a square.

As seen in the picture, side AB corresponds to side CD and side AD corresponds to side BC.

In addition, we can see that the orientations A, B, C, and D are all 90-degree right angles.

The parallelogram ABCD is a square as a result.

Finding ABCD's Perimeter:

The sum of a square's four edges determines its perimeter.

The sides AB, CD, AD, and BC are equal on the picture, as can be seen. Consequently, the ABCD boundary

4 × AB

= 4 × CD

= 4 × AD

= 4 × BC

Finding the Area of ABCD:

A square's area is equivalent to the square of one of its sides. The sides AB, CD, AD, and BC are equal on the picture, as can be seen.

Consequently, ABCD's area equals (AB)².

= (CD)²

= (AD)²

= (BC)².

For more questions related to quadrilateral, visit:

brainly.com/question/27991573

#SPJ1

The clear image of quadrilateral attached below,

At equilibrium we expect [Reactants} < [Products)  from the the profile that has been shown.

An energy profile diagram, also known as an energy diagram or reaction coordinate diagram, is a graphical representation of the energy changes that occur during a chemical reaction or a physical process. It shows the energy levels of the reactants, products, and any intermediate species that may form during the reaction.

The horizontal axis of an energy profile diagram represents the reaction coordinate, which is a measure of the progress of the reaction from the reactants to the products. The vertical axis represents the energy of the system.

Learn more about energy profile:https://brainly.com/question/13189077

#SPJ1

Explanation: The evolution of numbers developed differently with disparate versions, which include the Egyptian, Babylonians, Hindu-Arabic, Mayans, Romans, and the modern American number systems.

Profit ratios are used to assess a company's profitability by evaluating its profit in relation to other financial indicators like sales, assets, or equity.

The return on assets ratio is used to evaluate the connection between the assets your business uses and the profits it makes. You calculate it using information from the balance sheet and the income statement. (The ratio is multiplied by 100 to become a percentage.)

But, this does not necessarily imply that this is the profit margin you should aim for, a modest margin is 5%. A healthy margin is 10%, and a large margin is 20%.

Therefore, To evaluate job performance using these methods, you would need to define your research goals and variables, select your cross-section and time period, collect and analyse the relevant data, and draw conclusions based on your findings.

Learn more about ratios here:

https://brainly.com/question/29342886

#SPJ1

The resulting three-dimensional figure is a cone with base radius of 17 inches.

A cone is a three-dimensional geometric shape that has a circular base and a curved surface that tapers to a point, called the apex. The base of the cone is a circle, and the height of the cone is the perpendicular distance from the apex to the center of the base. The surface of the cone is made up of all the points that are equidistant from the apex and lie on the base.

Consider an isosceles triangle with 82 inches of circumference and a leg length of 24 inches.

This means that 82 - 2(24) = 82 - 48 = 34 inches is the length of the other side.

The triangle is rotated along a line that passes through points B and D, with point D serving as the intersection of lines AC.

When this happens, a cone will be created in three dimensions with a base radius equal to the length of line AD (i.e. half of the length of line AC being the other side of the isosceles triangle).

The resulting cone's base radius is 1/2 (34) = 17 inches.

Hence, the resulting three-dimensional figure is a cone with base radius of 17 inches.

To know more about Cone visit :

brainly.com/question/16394302

#SPJ1

Answer:

1.5  2.4  3.8

Step-by-step explanation:

1. 5

2. 4

3. 8

4. 6

5. 8

6. 15

7. 8

8. 12

9. 6

Answer:

To calculate the monthly installment for Justin's car loan, we can use the formula for the present value of an annuity:

PV = (PMT / r) x [1 - 1 / (1 + r)^n]

where PV is the present value of the loan, PMT is the monthly payment, r is the interest rate per period (in this case, per month), and n is the number of periods (in this case, the number of months in 4 years, which is 48).

We know that PV is the amount of the car loan, which is N$18500. We also know that r is 6% per year, which is equivalent to 0.5% per month (since there are 12 months in a year). Finally, we know that n is 48.

Substituting these values into the formula, we get:

18500 = (PMT / 0.005) x [1 - 1 / (1 + 0.005)^48]

Simplifying this expression:

18500 = (PMT / 0.005) x 36.4358

PMT = 18500 / 36.4358 / 0.005

PMT ≈ N$402.87

Therefore, Justin's monthly installment for his car loan is approximately N$402.87.

Answer:

159 proper subsets.

Step-by-step explanation:

Given a set {2, 4, 6, 8...100}, how many proper subsets are there?

First, find how many subsets there are in 2 - 10:

That's 16.

Then because there are 10 10s in 100, multiply by 10:

16 x 10 = 160

Finally, because it says proper subsets, subtract by 1:

160 - 1 = 159 proper subsets.

Therefore, there are 159 proper subsets in {2, 4, 6, 8...100}

Answer: The range is 20, Standard Deviation, σ: 6.8702256149271

Step-by-step explanation:

I hope it helped!

<3

The piecewise function will be continuous in its domain if k = 49/48

Here we have a piecewise function and we want to find the value of k suc that the function is continuous on the domain.

To get that, both piecese of the function must ahve the same value in the jump, then we will get:

f(7) = f(7)

Replacing the functions we will get:

k·7²  = 7·7 + k

Let's solve that equation for k.

49k = 49 + k

49k - k = 49

48k = 49

k = 49/48

That must be the value of k such that the function is continuous in all its domain.

Learn more about piecewise functions at:

https://brainly.com/question/27262465

#SPJ1

Answer:

the difference is the first one, (-3)^2, is negative while the other is positive

Step-by-step explanation:

Answer:

x=9

Step-by-step explanation:

this is solved by using cover and cancel so we can isolate the x variable

1) first add 72 to both sides.

6x=54

2) second divide both sides by 6

3) x=9

Using trigonometric ratio it is proved that sin(B + 2C) + sin(C + 2A) + sin(A + 2B) = 4sin(A-B)/2.cos(B-C)/2.cos(C-A)/2 when A + B + C = 180.

What is trigonometric ratio?

Triangle side length ratios are known as trigonometric ratios. In trigonometry, these ratios show how the ratio of a right triangle's sides to each angle. Sine, cosine, and tangent ratios are the three fundamental trigonometric ratios.

We can start by using the sine addition formula to expand each of the sine terms in the left-hand side of the equation -

sin(B + 2C) = sin(B)cos(2C) + cos(B)sin(2C) = 2sin(B)cos(C)²

sin(C + 2A) = sin(C)cos(2A) + cos(C)sin(2A) = 2sin(C)cos(A)²

sin(A + 2B) = sin(A)cos(2B) + cos(A)sin(2B) = 2sin(A)cos(B)²

Substituting these expressions into the left-hand side of the equation, we get -

2sin(B)cos(C)² + 2sin(C)cos(A)² + 2sin(A)cos(B)²

Factoring out the 2, we can rewrite this as -

2(sin(B)cos(C)² + sin(C)cos(A)² + sin(A)cos(B)²)

Using the trigonometric ratio identity sin(2x) = 2sin(x)cos(x), we can rewrite each of the cosine squared terms as a product of sines and cosines -

cos(C)² = (1/2)(1 + cos(2C)) = (1/2)(1 + 2cos(C)sin(C))

cos(A)² = (1/2)(1 + cos(2A)) = (1/2)(1 + 2cos(A)sin(A))

cos(B)² = (1/2)(1 + cos(2B)) = (1/2)(1 + 2cos(B)sin(B))

Substituting these expressions into the previous equation, we get -

2(sin(B)(1/2)(1 + 2cos(C)sin(C)) + sin(C)(1/2)(1 + 2cos(A)sin(A)) + sin(A)(1/2)(1 + 2cos(B)sin(B)))

Simplifying and grouping the terms, we get -

sin(B)sin(C)cos(C) + sin(C)sin(A)cos(A) + sin(A)sin(B)cos(B)

Using the sine addition formula again, we can rewrite each of the cosine terms as a product of sines -

cos(C) = sin(A + B)

cos(A) = sin(B + C)

cos(B) = sin(C + A)

Substituting these expressions into the previous equation, we get -

sin(B)sin(C)sin(A + B) + sin(C)sin(A)sin(B + C) + sin(A)sin(B)sin(C + A)

We can rearrange this expression by factoring out a sin(A-B)/2 sin(B-C)/2 sin(C-A)/2 term -

sin(A-B)/2 sin(B-C)/2 sin(C-A)/2 (cos(A) - cos(B) + cos(B) - cos(C) + cos(C) - cos(A))

Simplifying the terms in parentheses, we get -

sin(A-B)/2 sin(B-C)/2 sin(C-A)/2 (0)

Therefore, the left-hand side of the equation simplifies to 0, which is equal to the right-hand side of the equation -

4sin(A-B)/2.cos(B-C)/2.cos(C-A)/2

Therefore, we have proven that sin(B + 2C) + sin(C + 2A) + sin(A + 2B) = 4sin(A-B)/2.cos(B-C)/2.cos(C-A)/2.

To learn more about trigonometric ratio from the given link

https://brainly.com/question/13276558

#SPJ1

The mix design and w/c ratio used in the concrete mix are commonly used for M15 grade concrete, and achieving a compressive strength of 18 MPa after 7 days of curing may be reasonable depending on the target strength and other design specifications.

The actual compressive strength of 18 MPa achieved after 7 days of curing may be lower or higher than the target strength, depending on the design specifications and requirements.

However, the mix design of 3:2:1 (cement:sand:aggregate) with a water-cement (w/c) ratio of 0.50 is a commonly used mix proportion for M15 grade concrete. With proper curing and compaction, this mix design should be capable of achieving a compressive strength of at least 15 MPa at 28 days of curing.

The compressive strength is typically measured after 28 days of curing, not just 7 days. Therefore, it may be premature to conclude whether the achieved compressive strength of 18 MPa is reasonable without testing the concrete at 28 days of curing.

To know more about compressive strength:

https://brainly.com/question/15230572

#SPJ4

_____The given question is incomplete, the complete question is given below:

do the compression values seem resonable given the  3:2:1. mix design, 0.50 w/c ratio and 7 days of curing. M 15 grade concrete

Cement = 3 Part

Sand = 2 Part

Aggregate = 1 Part

Total dry volume of Material Required = 1.57 cu.m

actual compressive strength of the concrete = 18 MPa