Find the number of ways of arranging the elements of [n] in such a way that even and odd numbers must alternate.

The equation C(t) = 2 tells us that at a moment of t, the numeric value of the variable C is of 2 units.

The general format of an ordered pair is given as follows:

(x,y).

The meaning of an ordered pair (x,y) is that y = f(x), meaning that the numeric value of the function at the value of x is of y.

The ordered pair for this problem is given as follows:

(t, C(t)) = (t,2).

Meaning that at a moment of t, the numeric value of the variable C is of 2 units.

More can be learned about ordered pairs at brainly.com/question/1528681

#SPJ1

Based on the given information and measurements, the following statements are true:

The perimeter of the full-size game board is six times the perimeter of the travel-edition game board: This statement is false. The perimeter of the full-size game board can be calculated as the sum of the lengths of its three sides: AB + BC + AC = 32 + 52 + 52 = 136 cm. The perimeter of the travel-edition game board can be calculated as the sum of the lengths of its three sides: AX + XY + YZ = 13 + 21 + 18 = 52 cm. Therefore, the perimeter of the full-size game board is 2.62 times the perimeter of the travel-edition game board, not 6 times.

The travel-edition side corresponding to the 48-cm side on the full-size board will measure 12 centimeters: This statement is false. The travel-edition side corresponding to the 48-cm side on the full-size board is side XY. The length of XY can be calculated using proportions: XY/48 = YZ/52, which gives XY = 48*18/52 = 16.62 cm (rounded to two decimal places).

The travel-edition side corresponding to the 48-cm side on the travel-edition board will measure 13 centimeters: This statement is true. The travel-edition side corresponding to the 48-cm side on the travel-edition board is side AX, which has a length of 13 cm.

The three angles represented on the travel-edition board are congruent to their corresponding angles on the full-size board: This statement is true. The three angles of a triangle are determined by the lengths of its sides, so if two triangles have the same side lengths, their angles must be congruent as well.

Therefore, the three angles represented on the travel-edition board (at vertices A, X, and Y) are congruent to their corresponding angles on the full-size board (at vertices A, B, and C).

learn more about Congruent: https://brainly.com/question/29789999

#SPJ1

Answer:

which book are u talking about.. post the question please..

According to the empirical rule, for a bell-shaped distribution with a mean of 30 and a standard deviation of 5 is approximately 99.7%,

Using the empirical rule, we know that for a normal distribution with a mean of 30 and a standard deviation of 5, approximately:

Therefore, the percentage of data between 15 and 45 is approximately 99.7%, which corresponds to option c.

To learn more about the empirical rule, refer:-

https://brainly.com/question/30404590

#SPJ4

The measure of angle U = 84° and the measure of angle C = 75°

The sine, cosine, tangent, cotangent, secant, and cosecant functions are the fundamental trigonometric functions. Inverse trigonometric functions are just the inverse functions of these functions. They can also be referred to as antitrigonometric functions or arcus functions. To find the angle for any trigonometric ratio, these inverse trigonometric functions are applied.

Given that:

sin U = 0.9945

U = sin⁻¹ (0.9945)

U = 83.988°

U ≅ 84°   ( to the nearest degree)

tan C = 3.7321

C = tan⁻¹ (3.7321)

C = 75°

Learn more about the inverse of a trigonometric function here:

https://brainly.com/question/18450088

#SPJ1

Answer:

False

Step-by-step explanation:

This is because the opposite angles would be congruent, or equal.

I hope this helps! :)

The area of the isosceles triangle is 96 ft²

The formula for area of a triangle is expressed as

Area = 1/2bh

Where , b is the base and h is the height

We have that;

Base = 16ft

Using the Pythagorean theorem, we have;

20² - 16² =h²

Find the squares

h = √144

h= 12ft

Substitute the values

Area = 1/2 × 12 × 16

Multiply the values

Area = 96 ft²

Hence, the value is 96 ft²

Learn about area on:

https://brainly.com/question/25292087

#SPJ1

The average distance from the mean is 0.09.

The mean is also known as the average and is calculated by adding up all the values in the set and then dividing the sum by the total number of values.

So, for the given set of data: 24.49, 24.68, 24.77, 24.83, 24.73, the mean would be calculated as follows:

Mean = (24.49 + 24.68 + 24.77 + 24.83 + 24.73) / 5

= 24.70

It tells us what the typical value is within the data set. In this case, the mean value of the data set is 24.70.

Next, let's find the median of the set of data. The median is the middle value of a data set when it is arranged in numerical order. In this case, the data set is already arranged in numerical order, so we can easily find the median.

The median value of the data set is the middle value, which is 24.77.

Now, we will calculate the deviation from the mean for each data point within the set. The deviation from the mean tells us how far each value is from the mean value. This is calculated by subtracting the mean from each value in the set.

Deviation from the mean for each data point:

-0.21, -0.02, 0.07, 0.13, 0.03

As you can see, some values are above the mean, and some are below the mean. The deviation from the mean can be used to determine how spread out the data is from the mean value.

Finally, we will calculate the mean deviation for the set. The mean deviation is the average of the absolute values of the deviation from the mean.

Mean deviation = (|(-0.21)| + |(-0.02)| + |0.07| + |0.13| + |0.03|) / 5

= 0.09

The mean deviation tells us the average distance from the mean value.

To know more about mean here.

https://brainly.com/question/22871228

#SPJ4

Therefore, the formula for h, given the assumption that the formula is for the surface area of a cylinder, is: h = 3πr/2 + 3πr²/4.

An equation is a mathematical statement that two expressions are equal to each other. It contains an equals sign (=) between two expressions, with one on each side. An equation can be used to describe a relationship between variables, to solve problems, or to represent a mathematical model. Equations can also be more complex and involve multiple variables and operations, such as the quadratic equation: ax² + bx + c = 0, where a, b, and c are constants and x is the variable. Solving equations is an important part of mathematics and many other fields of study, as it allows us to find solutions to problems and to model and understand real-world phenomena.

Here,

The given formula is:

S = 6π² + 5πr²

To solve for h, we need an equation that relates h to S and r. However, there is no h in the given formula. So either the formula is incomplete or we have to assume some relationship between h, S, and r.

If we assume that the formula is for the surface area of a cylinder, then we can relate h to S and r using the formula for the lateral surface area of a cylinder:

L = 2πrh

where L is the lateral surface area, h is the height, and r is the radius.

The total surface area S of a cylinder can be found by adding the area of the two circular bases (2πr²) to the lateral surface area:

S = 2πr² + L

S = 2πr² + 2πrh (substituting L with 2πrh)

Now we can rearrange this formula to solve for h:

S - 2πr² = 2πrh

h = (S - 2πr²) / (2πr)

Substituting the given value of S:

h = (6π² + 5πr² - 2πr²) / (2πr)

h = (6π² + 3πr²) / (2πr)

h = 3πr/2 + 3πr²/4

To know more about equation,

https://brainly.com/question/28243079?

#SPJ1

Answer:

CrabSVR

BRscrV

ScarbRV

VRbScCr

Step-by-step explanation:

I can suggest that some of these words might be memorable because they are short and have a combination of consonants and vowels that make them sound unique and catchy. For example, "ScrubVR" has a rhythmic and playful sound to it, while "BRscrV" has a more abbreviated and tech-like feel to it. Ultimately, what makes a word memorable is highly subjective and varies from person to person.

Answer: he right

Step-by-step explanation:

The trigonometry ratios have their values to be

The complete question is added as an attachment

From the question, we have the following parameters that can be used in our computation:

Hypotenuse = 10

Adjacent = 5

Opposite = 5√3

Using the above as a guide, we have the following:

sin(x) = Opposite/Hypotenuse

cos(x) = Adjacent/Hypotenuse

tan(x) = Opposite/Adjacent

Using the above as a guide, we have the following:

sin(x) = 5√3/10 = √3/2

cos(x) = 5/10 = 0.5

tan(x) = 5√3/5 = √3

The above are the values of the trigonometry ratios based on the attached figure

Read more about trigonometry ratios at

https://brainly.com/question/24349828

#SPJ1

The missing component in the nuclear equation.137Cs55 → X + -e will be 137Ba56. option B is correct.

The particles in the nucleus are changed, and one element is transformed into another element when particles in the nucleus are gained or lost.

Nuclear reactions are processes in which one or more nuclides are produced from the collisions between two atomic nuclei or one atomic nucleus and a subatomic particle.

This was the first observation of an induced nuclear reaction, that is, a reaction in which particles from one decay are used to transform another atomic nucleus.

The most notable man-controlled nuclear reaction is the fission reaction which occurs in nuclear reactors. A target nucleus is within the range of nuclear forces for the time allowing for numerous interactions between nucleons.

therefore, option B is correct.

Learn more about nuclear reaction, here :

brainly.com/question/10104286

#SPJ1

As a result, the answer is (e) 2.4 square inches, which is the difference between Richard's measured and real circle area.

In mathematics, area is a measure of the amount of space occupied by a two-dimensional object, such as a rectangle, triangle, circle, or any other shape. It's a scalar quantity that describes the size of a region in two-dimensional space. The units of area are typically square units, such as square inches, square centimeters, square meters, etc. In general, the area of a shape is a measure of how much space it occupies, and it is an important concept in geometry, engineering, and many other fields.

Here,

The formula for the area of a circle is given by:

A = πr²

Where r is the radius of the circle.

Using the incorrect radius of 3.6 inches, the calculated area would be:

A = π * (3.6 inches)² = 40.44 square inches

Using the correct radius of 3.5 inches, the actual area would be:

A = π * (3.5 inches)² = 38.5 square inches

So, the difference between Richard's measured area of the circle and the actual area of the circle would be:

40.44 square inches - 38.5 square inches = 1.94 square inches

Therefore, the answer is (e) 2.4 square inches that is the difference between Richard’s measured area of the circle and the actual area of the circle.

To know more about area,

brainly.com/question/22469440

#SPJ1

To find the Notes Payable balance, we need to use the accounting equation:

Assets = Liabilities + Equity

We are given the following information:

AP = $2,500

Building = $31,250

Land = $30,000

Notes Payable = ?

Retained Earnings = $125,000

AR = $18,750

Cash = $67,500

Equipment = $40,000

Capital Stock = $12,500

We can add up the assets to get:

Assets = AP + Building + Land + AR + Cash + Equipment

= $2,500 + $31,250 + $30,000 + $18,750 + $67,500 + $40,000

= $190,000

We can rearrange the accounting equation to solve for liabilities:

Liabilities = Assets - Equity

Plugging in the values we have:

Liabilities = $190,000 - ($125,000 + $12,500)

= $190,000 - $137,500

= $52,500

Therefore, the Notes Payable balance is:

Notes Payable = Liabilities - AP

= $52,500 - $2,500

= $50,000

Answer: She saved 90 dollars.

To solve this we must find amount of 600 that makes 15 percent.

15 % of 600 is 90. This means that Jennifer saved up 90 dollars

I hope that this helps & Good Luck <3 !!!

After 35 days, the colony will be 1281.95.

Exponential functions are functions where the independent variable, x is in the exponent.

Given that,

Bacteria colonies can increase by 45% every 7 days.

We know that,

Future amount = l (1 + r)^t

where l is the starting amount, r is the growth rate and t is the time.

Here,

l = 200

r = 45% = 45 / 100 = 0.45

t = 35 / 7 = 5

Substituting,

Future amount = (200) (1 + 0.45)⁵

                         = 1281.95

Hence the required amount is 1281.95.

Learn more about Exponential functions here :

https://brainly.com/question/23601101

#SPJ2

The solution is given below.

A scatter plot is a type of plot or mathematical diagram using Cartesian coordinates to display values for typically two variables for a set of data. If the points are coded, one additional variable can be displayed.

here, we have,

A scatter plot is a graph in which the values of two variables are plotted along two axes. Every data of the table is the coordinate of a point in the plot. To make a scatter plot, first assign a variable to x-axis and the other variable to  y-axis, in this question speed was assigned to x-axis and distance was assigned to y-axis. And then, locate the points as coordinates, for example, the first point is (2, 5).

See picture attached.

Read more on scatter plot here:

brainly.com/question/28605735

#SPJ9

Answer:

  6

Step-by-step explanation:

You want the population of Leavetown in 100 years if it is 123,000 now and decreasing at the rate of 9.4% per year.

The exponential equation that models the population is ...

  p = 1230000·(1 -0.094)^t

where t is the number of years later.

For t=100, the attached calculation shows the population in 100 years is about 6 persons.

Answer:

45

Step-by-step explanation:

Y = forty percent of blank to make 18

18 = 40/100 x Y

Y = 18 x 100/40

Y = 18 x 100 divided by 40

Y = 45

The probability of typing any particular sequence of n letters is (1/26)^n. The probability of word of length m (where m ≤ n) is (1/26)^m. The probability of  at least one occurrence is 1 - (25/26)^(n-m+1). The number of times the monkey types a specific word of length m is (n-m+1)*(1/26)^m.

Assuming that the monkey's key presses are truly random and independent of each other, the probability of the monkey typing any particular sequence of n letters is (1/26)^n. This is because there are 26 choices for each letter, and the probability of the monkey choosing any particular letter is 1/26.

The probability of the monkey typing a specific word of length m (where m ≤ n) is (1/26)^m. This is because the monkey must type the specific sequence of m letters in order, and each letter has a probability of 1/26 of being typed.

The probability of the monkey typing at least one occurrence of a specific word of length m is 1 - (25/26)^(n-m+1). This is because the monkey has n-m+1 opportunities to type the word, and the probability of missing the word in any one opportunity is 25/26 (since there are 25 other letters that the monkey could type instead).

The expected number of times the monkey types a specific word of length m is (n-m+1)*(1/26)^m. This is the product of the probability of the monkey typing the word in any given opportunity (which is (1/26)^m), and the number of opportunities the monkey has to type the word (which is n-m+1).

To learn  more about probability, refer:

https://brainly.com/question/30576587

#SPJ4

a. Eliminating the parameter yields the equation [tex]x2+y2=100[/tex], which is a circle centered at the origin with a radius of 10.

b. The curve is a circle with a positive orientation, going counterclockwise from the origin.

a. To eliminate the parameter, we first square both sides of the equations to obtain: [tex]x2=(−10cos2t)2 and y2=(−10sin2t)2.[/tex]Then, since cos2t and sin2t are both between -1 and 1, the terms on the right hand side of each equation can be simplified to 100. Thus, the equation [tex]x2+y2=100[/tex]is obtained.

b. This equation describes a circle centered at the origin with a radius of 10. The positive orientation of the curve is counterclockwise from the origin, i.e. it starts at the origin and moves up, then to the right, then down, and then to the left.

Learn more about equation here

https://brainly.com/question/649785

#SPJ4

The inequality that Contessa is solving is obtained as 5 ≥ q ≥ 1/3.

What is an inequality?

In Algebra, an inequality is a mathematical statement that uses the inequality symbol to illustrate the relationship between two expressions. An inequality symbol has non-equal expressions on both sides. It indicates that the phrase on the left should be bigger or smaller than the expression on the right, or vice versa.

The given compound inequality is = -7 ≤ 8 - 3q ≤7

To solve this compound inequality, start by subtracting 8 from each part of the inequality -

-15 ≤ -3q ≤ -1

Next, divide each part by -3, remembering to flip the direction of the inequalities since it is getting divided by a negative number -

5 ≥ q ≥ 1/3

So the solution to the inequality -7 ≤ 8-3q ≤ 7 is the set of all q values that lie between 1/3 and 5, including the endpoints 1/3 and 5.

Note that this solution set is different from the solution set of the absolute value inequality |8-3q| < 7, which does not include the endpoints.

Therefore, the inequality is 5 ≥ q ≥ 1/3.

To learn more about inequality from the given link

https://brainly.com/question/11234618

#SPJ1

The differential equation dy/dt = y(3-y) smug all of the given conditions.

One possible autonomous differential equation with equilibrium solutions at y=0 and y=3, and with y' > 0 for 0 < y < 3 and y' < 0 for -∞ < y < 0 and 3 < y < ∞, is:

dy/dt = y(3-y)

We can see that y=0 and y=3 are equilibrium solutions by setting dy/dt = 0 and solving for y:

dy/dt = y(3-y) = 0

y = 0 or y = 3

To check the sign of y', we can use the derivative of y(3-y) with respect to y:  d/dy (y(3-y)) = 3 - 2y

For y < 0, we have y(3-y) < 0, so d/dy (y(3-y)) < 0, which says that y' < 0.

For 0 < y < 3, we have y(3-y) > 0, so d/dy (y(3-y)) > 0, which implies that y' > 0.

For y > 3, we have y(3-y) < 0, so d/dy (y(3-y)) < 0, which implies that y' < 0.

To know more about Differential equation:

https://brainly.com/question/14728084

#SPJ4

Let's denote the midpoint of each value interval by x and the frequency by f. Then the estimated mean is given by:

(mean) = (Σxf) / (Σf)

where the summation is taken over all value intervals.

Using the provided grouped frequency table, we can calculate the estimated mean as follows:

Midpoint (x) Frequency (f)     xf

4.5                    12                     54

8.5                      18                     153

12.5                     24            300

16.5                      14             231

Total             68             738

The sum of the xf column is 738, and the sum of the f column is 68. Therefore, the estimated mean is:

(mean) = (Σxf) / (Σf) = 738 / 68 ≈ 10.85

Answer to Question 22:

Since A and B are independent events, we have:

P(B|A) = P(B)

Also, from the definition of conditional probability, we have:

P(B|A) = P(BA) / P(A)

Solving for P(BA), we get:

P(BA) = P(B) * P(A) = 0.13 * 0.72 = 0.0936

Therefore, P(BA) = 0.0936.

To know more about Conditional Probability:

https://brainly.com/question/30144287

#SPJ4

In this example, process A completed its final quantum in q4, process B completed its final quantum in q4, and process C completed its final quantum in q4.

To determine which queue each process is in when it begins its final quantum, we need to know the length of time each process has been running and how many times it has already used each queue's quantum. Without that information, we cannot determine which queue a process will be in at a specific point in time. However, we can provide an example of how a process might move between the queues over time.

Let's consider the following three processes:

Process A - CPU burst time = 100s

Process B - CPU burst time = 30s

Process C - CPU burst time = 50s

Assume that all three processes arrive at the scheduler at the same time and are added to q1, the highest priority queue.

When the scheduler begins, it will select the first process in q1, which is process A. Since q1 has a quantum of 5s, process A will run for 5s before it is preempted and placed at the back of q2.

The next process in q1 is B. B will also run for 5s before being preempted and placed at the back of q2.

Next, the scheduler will select process C from q1. C will run for 5s before being preempted and placed at the back of q2.

Now the scheduler has completed one round-robin cycle through q1, and all the processes in q1 have used up their q1 quantum. The scheduler will move on to q2 and select the first process in that queue, which is process A. Since q2 has a quantum of 10s, process A will run for an additional 5s before being preempted and placed at the back of q3.

The next process in q2 is B. B will run for 10s before being preempted and placed at the back of q3.

Next, the scheduler will select process C from q2. C will run for 10s before being preempted and placed at the back of q3.

Now the scheduler has completed one round-robin cycle through q2, and all the processes in q2 have used up their q2 quantum. The scheduler will move on to q3 and select the first process in that queue, which is process A. Since q3 has a quantum of 20s, process A will run for an additional 10s before being preempted and placed at the back of q4.

The next process in q3 is B. B will run for 20s before being preempted and placed at the back of q4.

Next, the scheduler will select process C from q3. C will run for 20s before being preempted and placed at the back of q4.

Now the scheduler has completed one round-robin cycle through q3, and all the processes in q3 have used up their q3 quantum. The scheduler will move on to q4 and select the first process in that queue, which is process A. Since q4 has a quantum of 40s, process A will run for an additional 20s before completing its CPU burst.

The next process in q4 is B. B will run for 30s before completing its CPU burst.

Finally, the scheduler will select process C from q4. C will run for 40s before completing its CPU burst.

However, it's important to note that the exact behavior of the scheduler will depend on the length of time each process has been running and how many times it has already used each queue's.

To learn more about process here:

https://brainly.com/question/28337596

#SPJ4

(a) The equation of the secant line connecting (1, f(1)) and (0.9, f(0.9)) is y = -x + 2.1.

(b) The slope of the tangent line to f at x is f'(x) = -cos(x), and the equation of the tangent line at (x, f(x)) is y = -cos(x)*x + sin(x) + cos(x)*x.

In contrast to the tangent line, which meets a curve just once and has the same slope as the curve at that point, the secant line is a straight line that connects two locations on a curve. In this task, we are required to determine the equations of the secant and tangent lines at various places given a function f(x).

Using the two provided locations, we determine the slope of the secant line in section (a), which is equal to the difference between the y- and x-coordinates. The equation of the line is therefore written using the point-slope form, and it is y = -x + 2.1.

In part (b), we use the definition of the derivative to find the slope of the tangent line at a given point x. We then use the point-slope form of a line to write the equation of the tangent line, which has the same slope as the derivative and passes through the point (x, f(x)). In this case, the slope of the tangent line is -cos(x), and the equation of the tangent line is

y = -cos(x)*x + sin(x) + cos(x)*x.

The complete question is provided in the image below.

Read more about Secant line:

https://brainly.com/question/30162655

#SPJ4