find the supplement of each of the following angles measured in radians. 2.68 is supplementary to 2.79 is supplementary to 1.79 is supplementary to 2.04 is supplementary to 0.34 is

The well ordering property states that every non-empty set of positive integers contains a least element. This property can be used to show the existence and uniqueness of the greatest common divisor (GCD) of two positive integers.

a) To show that S is non-empty, we note that the element 0 is a member of S, since 0 = 0 + 0*b.

b) The well ordering property guarantees that S has a least element, which we denote as c.

c) Suppose d is a common divisor of a and b. We know that a = dq and b = dr for some integers q and r. Then c = a + bt = dq + drt = d(q + rt). Thus, d must be a divisor of c since it divides the terms on the right side of the equation.

d) Assume that c does not divide a. Then a = qc + r where 0 < r < c. This means r is also a member of S, contradicting the choice of c as the least element of S.

e) From (c) and (d) we can conclude that the GCD of a and b exists. To show that it is unique, we note that if a and b have two GCDs, d and e, then d and e must both divide c. Since c is the least possible value, this implies that d and e must actually be the same number, thus showing the GCD of a and b is unique.

To learn more about integers:

https://brainly.com/question/17695139

#SPJ4

The missing values in the ratio table on pages and minutes is :

Pages         1 / 4    3 / 4    1 ¹ / ₂     5

Minutes      1 / 2      1 ¹ / ₂     3       10

To fill the ratio table, find the relationship between Minutes and Pages :

= 1 / 2 ÷ 1 / 4

= 2 mins per page

This means that every page is read in 2 minutes.

3 / 4 pages would be read in :

= 3 / 4  x 2

= 1 ¹ / ₂ minutes

3 minutes would allow for the reading of :

= 3  / 2

= 1 ¹ / ₂ pages

5 pages would be read in:

= 5 x 2

= 10 mins

Find out more on ratio tables at https://brainly.com/question/2914376

#SPJ1

ab is diagonalizable and can be written as a product of invertible matrices.

Since a and b are both diagonalizable, there exist invertible matrices u and v such that [tex]uau^{-1} and vbv^{-1}[/tex] are both diagonal matrices. Thus, we can rewrite ab as [tex]uau^{-1}vbv^{-1}[/tex]. Since matrix multiplication is associative, the order of multiplication does not matter and thus [tex]ab = u(au^{-1}vb)v^{-1}[/tex]. Since the [tex]au^{-1}vb[/tex] is also diagonalizable, it can be written as c, where c is a diagonal matrix. Thus, [tex]ab = ucv^{-1}[/tex], which is also a diagonal matrix. Therefore, ab is diagonalizable and can be written as a product of invertible matrices.

Learn more about invertible matrices here:

https://brainly.com/question/5559234

#SPJ4

Complete questiom:

Suppose that A and B are diagonalizable matrices of the same size, i.e.\ there exist invertible matrices U and V such that [tex]UAU^{-1} and VBV^{-1}[/tex]are diagonal. Show that AB = UDEV, where UDEV is also a diagonal matrix.

The SAS congruence criteria, option (c), is the appropriate response. The acronym SAS stands for "side-angle-side," and it denotes that two sides and the included angle of one triangle must be congruent to two sides and the incorporated angle of another triangle for the triangles to be considered congruent.

"Right-angle-hypotenuse-side" (or option a) refers to a particular instance of the SAS criteria that only applies to right triangles.

The acronym ASA (option b) stands for "angle-side-angle," and it denotes that two angles and the included side of one triangle must be congruent with two angles and the included side of some other triangle for the triangles to be considered congruent.

Side-side-side, or SSS (option d), refers to the situation in which all three sides of one triangle are congruent with all three sides of another triangle.

Learn more about congruency at

https://brainly.com/question/10677854

#SPJ4

The question is -

Two triangles are congruent if two angles and the side included between them in one triangle are equal to the two angles and the side included between them in the other triangle. This is known as:

a. RHS congruence criterion

b. ASA congruence criterion

c. SAS congruence criterion

d. SSS congruence criterion

Answer:

20

Step-by-step explanation:

592--------16hours

740---------x hours

x=740 ×16÷592 =20

Answer:

20 hours

Step-by-step explanation:

Find speed from distace and time taken to reach uncle's house

s = d/t = 592/16

s = 37 miles/hr

then find time from distance to chicago and time taken to reach there:

t = d/s = 740/37

t = 20 hours

Hope this helps!

Referring to the given statements,

a) p → q: "If it is Friday, then I don't go to class."

b)  -q → -p:  "If I don't go to class, then it is not Friday."

c)  p ∧ q :  "It is both Friday and I don't go to class."

d)  p V -q: "Either it is Friday, or I don't go to class (or both)."

In this problem, the propositions are:

p : It is Friday

q :  I don't go to class

Hence,

a)  p → q is an implication and read as: "If it is Friday, then I don't go to class."

b). -q → -p

-q is negation of q and read as: I go to class

-p is negation of p and read as: It is not Friday

Therefore, -q → -p means "If I don't go to class, then it is not Friday."

c)  p ∧ q is a conjunction. p ∧ q can be read as: "It is both Friday and I don't go to class."

d)  p V -q  is a disjunction. p V -q can be read as: "Either it is Friday, or I don't go to class (or both)."

Learn more about logical operators here:

https://brainly.com/question/29355827

#SPJ4

The formula for a curve grade is based on a normal distribution with the average score being 0.

The formula for each grade is as follows:

A-grade: S + 20

B-grade: S + 10S< + 20

C-grade: S - 10S< + 20

D-grade: S - 20

F-grade: S < 0

The formula  is based on a normal distribution with the average score being 0.

For example, if the average score is 50 and your score is 55, then you would receive an A-grade because your score is 5 points above the average. This can be calculated by adding 20 points to your score of 55 resulting in a grade of[tex]75 (55 + 20 = 75)[/tex]. Similarly, if your score is 40, then you would receive a C-grade because your score is 10 points below the average. This can be calculated by subtracting 10 points from your score of 40 resulting in a grade of 30 (40 - 10 = 30).

Learn more about normal distribution here:

https://brainly.com/question/29509087

#SPJ4

Answer: (0,0)

Step-by-step explanation: 3+5=8-4=4-4=0

To determine if a linear transformation is onto, we need to check if every vector in the range has at least one pre-image in the domain.

Let T be a linear transformation from R^3 to R^2 given by:

T (x, y, z) = (2x - y, x + 3y - 4z)

(a) To check if T is one-to-one, we need to check if for any two distinct vectors (x1, y1, z1) and (x2, y2, z2) in R^3, we have T (x1, y1, z1) ≠ T (x2, y2, z2). Equivalently, we can check if T (x1, y1, z1) - T (x2, y2, z2) ≠ 0 for any two distinct vectors (x1, y1, z1) and (x2, y2, z2) in R^3.

So, let (x1, y1, z1) and (x2, y2, z2) be two distinct vectors in R^3. Then:

T (x1, y1, z1) - T (x2, y2, z2) = (2x1 - y1, x1 + 3y1 - 4z1) - (2x2 - y2, x2 + 3y2 - 4z2)

= (2x1 - y1 - 2x2 + y2, x1 + 3y1 - 4z1 - x2 - 3y2 + 4z2)

= (2(x1 - x2) - (y1 - y2), x1 - x2 + 3(y1 - y2) - 4(z1 - z2))

For T to be one-to-one, the only solution to T (x1, y1, z1) - T (x2, y2, z2) = 0 must be (x1, y1, z1) = (x2, y2, z2). So, we need to solve the equation above and check if the only solution is (x1, y1, z1) = (x2, y2, z2).

To know more about Linear Transformation:

https://brainly.com/question/13005179

#SPJ4

The measure of m∠5 of the quadrilateral is m∠5 = 27° because of alternate interior angles

The solution is Option C. Angle A B D is angle 5

Straight, equally spaced lines that never cross each other and are on the same plane are called parallel lines. The angles that are created when any two parallel lines are intersected by a line (referred to as the transversal) have a relationship. Corresponding angles, Alternate Interior Angles, Alternate Exterior Angles, and Consecutive Interior Angles are some of the several pairs of angles that are created at this intersection.

Corresponding angles

When two parallel lines are intersected by a transversal, the corresponding angles have the same relative position

Alternate Interior Angles

Alternate interior angles are formed on the inside of two parallel lines which are intersected by a transversal.

Alternate Exterior Angles

The pairs of angles formed on either side of a transversal that divides two parallel lines are known as alternate exterior angles.

Consecutive Interior Angles

When two parallel lines are cut by a transversal, the pairs of angles formed on the inside of one side of the transversal are called consecutive interior angles or co-interior angles.

Given data ,

Let the quadrilateral be represented as ABCD

Now , the diagonal DB is the transversal line passing through the 2 parallel lines of the quadrilateral

And , the measure of m∠2 = 27°

The measure of m∠2 = measure of m∠5 ( alternate interior angles are equal )

So , the angles m∠2 and m∠5 are alternate interior angles

And , the measure of m∠5 = 27°

Hence , the measure of m∠5 = 27° ( interior angles )

To learn more about parallel lines cut by transversal click :

https://brainly.com/question/28182928

#SPJ9

The Sampling Distribution used when making inferences about a single population's variance is a(n) Chi Square distribution.

The Chi Square distribution is defined as a continuous probability distribution that takes only non-negative values. It is used to analyze the variability of a set of data and is frequently used in hypothesis testing and confidence interval estimation.

In this test, the test statistic follows a chi-square distribution with (n - 1)  degrees of freedom, where n = sample size. The larger the size of the sample , the closer the sampling distribution of test statistic will approach to  a Normal Distribution .

Therefore , the chi-square distribution is a statistical tool which the researchers use to draw conclusions about the variability of a population based on a sample.

Learn more about Chi Square Distribution here

https://brainly.com/question/30259945

#SPJ4

Answer: 1.75 yards

Step-by-step explanation:

You need to divide 7 by 4 to get 4 equal sections.

7/4 = 1.75

Therefore, 1.75 is your answer

La intensidad de la luz afecta la tasa de fotosíntesis, cuanto mayor es la intensidad de la luz, mayor es la tasa de fotosíntesis y viceversa. ver explicacion.

Important structures in plant development are buds, shoots, roots, leaves, and flowers; plants produce these tissues and structures throughout their life from meristems located at the tips of organs, or between mature tissues. Thus, a living plant always has embryonic tissues.

La fotosíntesis es el proceso mediante el cual las plantas verdes fabrican su propio alimento en presencia de luz solar, clorofila, dióxido de carbono y agua.

La intensidad de la luz afecta la tasa de fotosíntesis, cuanto mayor es la intensidad de la luz, mayor es la tasa de fotosíntesis y viceversa. Cuando hay una mayor intensidad de luz, hay más luz disponible para impulsar las reacciones de la fotosíntesis.

For more information, refer to the link:-

brainly.com/question/19524691

#SPJ9

The solutions to the equation 3x²-18x=-15 by completing the square are x = 1 and x = 5.

In order to make an equation a perfect square, something must be added. This is known as "completing the square." This makes a number of equations simple to solve. In fact, by solving the square, all quadratic problems can be resolved.

To complete the square for the equation 3x²-18x=-15, we can follow these steps:

Move the constant term to the right side of the equation:

3x² - 18x + 15 = 0

Divide both sides by the coefficient of x^2 to make the coefficient 1:

x² - 6x + 5 = 0

To complete the square, we need to add and subtract the square of half of the coefficient of x:

x² - 6x + 9 - 4 = 0

(x - 3)² = 4

Take the square root of both sides to solve for x:

x - 3 = ±2

x = 3 ± 2

x = 1 or x = 5

Therefore, the solutions to the equation 3x²-18x=-15 by completing the square are x = 1 and x = 5.

To know more about Quadratic equation visit:

brainly.com/question/30098550

#SPJ1

All the sample tests are stated below :

1) A two-independent-sample t test.

2) A one-sample t test.

3) A related-samples t test.

4)  A related-samples t test.

It is a subgroup of people with traits from a wider population. When population sizes are too big for the test to include all potential participants or observations, samples are utilized in statistical testing. A sample must be representative of the entire population and must not be biased toward any one trait.

A professor runs an experiment to see if front-row students perform better on an exam than back-row pupils.

This is a two-independent-sample t test, as there are two distinct groups (students in the front row and students in the back row) and the professor is interested in comparing the mean exam scores between them.

To determine whether students spend more than 30 minutes on an activity on average, a graduate student chooses a sample of 25 participants.

This is a one-sample t test, as there is only one group of participants and the graduate student is interested in comparing the mean time students attend to a task to a specific value (30 minutes).

To determine whether right-handed siblings exhibit higher emotional intelligence than left-handed siblings, a researcher pairs up right- and left-handed siblings.

This is a related-samples t test using a matched-pairs design, as the researcher is interested in comparing emotional intelligence scores of right-handed and left-handed siblings who are matched based on certain criteria (in this case, being siblings).

A local school's principal is curious to discover how much an honors class benefits the children there. He administers tests to honors English students before the start of the school year and again at the conclusion of the year to gauge their progress.

This is a related-samples t test using a repeated-measures design, as the principal is interested in comparing the test scores of the same group of students before and after taking the honors English class to measure how much they learned during the year.

Learn more about sample test visit:

brainly.com/question/13201390

#SPJ1

Answer:

t ≤ 8

Step-by-step explanation:

Equation Total

1 hour 32 + 9.4 41.4

2 hours 32 + 2(9.4) 50.8

3 hours 32 + 3(9.4.) 60.2

4 hours 32 + 4(9.4.) 69.6

5 hours 32 + 5(9.4.) 79.0

6 hours 32 + 6(9.4.) 88.4

7 hours 32 + 7(9.4.) 97.8

8 hours 32 + 8(9.4.) 107.2

So we know the maximum amount of time is 8 hours. So now let's express this as an inequality:

32 + 9.4t ≤ 107.2 Now let's solve for t

9.4t ≤ 75.2

t ≤ 8

The rate at which the water level is rising when the water level is 3 cm,

⇒ 0.65 cm / sec

Mathematical expression is defined as the collection of the numbers variables and functions by using operations like addition, subtraction, multiplication, and division.

Let us assume it is a regular pyramid. The (altitude) height "h" of apex from base square, slanting height and the side "a" of the base square rise uniformly and proportionally when we move from the apex point to the base.

Now, If height (altitude) h becomes x times, then side "a" of the base square becomes x times, the slanting height also becomes x times.  Thus, the area b of the base square rises x² times.

Δh / h = Δa / a  

Δb / b  = 2 Δa / a = 2 Δh / h    

Or,     h₁/h₂ = a₁/a₂

Since, We know that;

⇒ V = 1/3 b h = 1/3 a² h

⇒ d V / dt = 1/3 a² dh/dt  + 1/3 h a da/dt

                 = 1/3 a² dh /dt + 2/3 h a  (a/h) (dh/dt)

                 = 1/3 a² dh / dt + 2/3 a² dh/dt

Hence, We get;

dV/dt  = a² dh/dt        

dh/dt = (1/a²) dV/dt

We have;

h₀ = 5 cm and a₀ = 3 cm    

At the base;

When h = 5cm,  

Hence,  h / h₀ = a/a₀ ;

⇒ a = a₀ h / h₀ = 5×5/3 = 8.3 cm

And, dh/dt = 1/8.3² × 45 = 45/68.89 cm/sec = 0.65 cm / sec

Thus, The rate at which the water level is rising when the water level is 3 cm,

⇒ 0.65 cm / sec

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ1

Let X be the number of different faces that appear (so X = 1, 2, or 3). The probability mass function of X is px(1) = 1/36, px(2) = 15/36, px(3) = 60/216 = 5/18.

To find the probability mass function px(k), where k is the number of different faces that appear, we can use the combinatorial approach:

When k = 1, there is only one possible combination of outcomes: all three tosses must have the same face, and there are 6 ways to choose which face it is. Therefore, the probability of k = 1 is:

px(1) = (6/6) * (1/6) * (1/6) = 1/36

When k = 2, there are three possible combinations of outcomes: the first two tosses can have the same face and the third a different face, the first and third tosses can have the same face and the second a different face, or the second and third tosses can have the same face and the first a different face.

There are 6 ways to choose which face appears twice and 5 ways to choose which face appears once. Therefore, the probability of k = 2 is:

px(2) = 3 * [(6/6) * (1/6) * (5/6)] = 15/36

When k = 3, there are 3! = 6 possible combinations of outcomes: each of the three tosses can have a different face. There are 6 ways to choose the face for the first toss, 5 ways to choose the face for the second toss, and 4 ways to choose the face for the third toss.

Therefore, the probability of k = 3 is:

px(3) = 6 * (6/6) * (5/6) * (4/6) = 60/216

Note that the probabilities add up to 1:

px(1) + px(2) + px(3) = 1/36 + 15/36 + 60/216 = 1

Therefore, the probability mass function of X is:

px(1) = 1/36

px(2) = 15/36

px(3) = 60/216 = 5/18

To learn more about probability mass function click on,

https://brainly.com/question/23631346

#SPJ4

The mean of the Experimental Group is -3.14 and the standard deviation is 132.

We can use this data to calculate the range of pain for most people in this group.

Using the formula for standard deviation, we can find the lower and upper bounds of the range. The lower bound is the mean minus one standard deviation, or[tex]-3.14 - 132 = -135.14[/tex]. The upper bound is the mean plus one standard deviation, or [tex]-3.14 + 132 = 128.86[/tex].

When converted to the 1 - 10 pain scale, the lower bound is 1.82 and the upper bound is 4.46. Therefore, we can conclude that the range of pain for most people in the Experimental Group is 1.82 - 4.46.

Learn more about standard deviation here:

https://brainly.com/question/23907081

#SPJ4

Answer: 2 hrs

Step-by-step explanation:

4/5 + 4/5 = 1 3/5 + 2/5 (half of 4/5) = 2

         ↑

(4/5 of a room)

The Mean number of major hurricanes gulf can expect in a season is 3.

What is probability?

A probability is a number that reflects the chance or likelihood that a particular event will occur. Probabilities can be expressed as proportions that range from 0 to 1, and they can also be expressed as percentages ranging from 0% to 100%.

What is mean?

The mean (aka the arithmetic mean, different from the geometric mean) of a dataset is the sum of all values divided by the total number of values. It's the most commonly used measure of central tendency and is often referred to as the “average.”

Given:

Gulf of Mexico averages 3 major Hurricanes

Since, It is stated that the Gulf experiences 3 major hurricanes on an average in a season. Since the average is the expected no. of observations the mean no. of major hurricanes Gulf expect is 3.

Hence, the Mean number of major hurricanes gulf can expect in a season is 3.

Learn more about mean at:

https://brainly.com/question/1136789

#SPJ1

Answer:

2 pieces of sc and 1 piece of rc

Step-by-step explanation:

Therefore, the probability that Bob will be hit by a car while crossing the point A is 1 [tex]-e^{-4t}[/tex] , where t is the time it takes him to cross the point A in seconds.

If the cars follow a Poisson process with rate 4 cars per minute, then the time between successive cars follows an exponential distribution with parameter λ = 4. Therefore, the probability density function of the time between cars is given by:

f(t) = λe^(-λt)

Since Bob takes t seconds to cross the point A, the probability that he will be hit by a car during this time is the probability that a car arrives within t seconds of his crossing, which is given by the cumulative distribution function:

F(t) = P(X ≤ t) = ∫[0, t] f(x)dx = ∫[0, t] 4e⁽⁻⁴ˣ⁾dx

Evaluating this integral, we get:

F(t) = [tex]-e^{-4t}[/tex]

Learn more about probability here: brainly.com/question/24756209

#SPJ4

The volume of a paraboloid with height h and base radius r can be found by treating it as a solid of revolution, rotating the parabolic cross-section about the y-axis.

The equation for the parabola is y = x^2 / (4h), so the equation for the cross-section is x = 2sqrt(hy). The volume can be found by integrating the area of the cross-section from y = 0 to y = h, and then multiplying by 2pi:

V_parab = 2pi * ∫[0,h] (2sqrt(hy))^2 dy, = 2pi * ∫[0,h] 4hy dy= 2pi * 2hy^2]_[0,h] = 4/3 * pi * h^3

The volume of a cylinder with the same height and base radius r is V_cyl = pi * r^2 * h. The ratio of the volume of the paraboloid to the volume of the cylinder is: V_parab / V_cyl = (4/3 * pi * h^3) / (pi * r^2 * h)

= (4/3 * h^2 * r)

For the second part, the volume of a sphere with radius r can be found by treating it as a solid of revolution, rotating a semicircle about its diameter.

The equation for a semicircle with radius r is y = sqrt(r^2 - x^2), so the equation for the cross-section is x = sqrt(r^2 - y^2). The volume can be found by integrating the area of the cross-section from y = -r to y = r, and then multiplying by 2pi: V_sphere = 2pi * ∫[-r,r] (sqrt(r^2 - y^2))^2 dy

= 2pi * ∫[-r,r] (r^2 - y^2) dy = 4/3 * pi * r^3

The volume of a cylinder with the same radius and height (which is equal to the diameter of the sphere) is V_cyl = pi * r^2 * 2r = 2pi * r^3. The ratio of the volume of the sphere to the volume of the cylinder is: V_sphere / V_cyl = (4/3 * pi * r^3) / (2pi * r^3) = 2/3

You can read more about the volume of the paraboloid at https://brainly.com/question/14307074

#SPJ4

No, the function aren't inverse of each other.

In mathematics, a function is represented as a rule that produces a distinct result for each input x. The collection of all the values that the function may input while it's defined is known as the sphere. The entire set of values that the function's affair can produce is appertained to as the range. The set of values that could be a function's labors is known as the co-domain.

Given

f( x) = 3x 6

g( x) = x5/3

So, the find the that both function are inverse of each other we've to prove

f( g( x)) = g( f( x))

So, f( g( x))

f( x+ 5/3)

= 3 (x+ 5/3) + 6

= 3x + 15 + 6

= 3x + 21

and, g( f( x))

= g(3x+ 6)

= 3x + 6 + 5/3

= 3x + 23/3

So, f( g( x)) ≠ g( f( x))

Learn more about Function here:

https://brainly.com/question/12431044

#SPJ9

7 minutes will it be until there are 120 grams of the element remaining.

To determine the quantity or percentage of something in terms of 100, use the percentage formula. Per cent simply means one in a hundred. With the percentage formula, a number between 0 and 1 can be expressed. A number that is expressed as a fraction of 100 is what it is. It is mostly used to compare and determine ratios and is represented by the symbol %.

We have,

An element with a mass of 820 grams decays by 24% per minute. To the nearest minute.

Now, 100 - 24 = 76% of the element remains after each minute.

So, 820 x (0.76[tex])^t[/tex] = 120 where t is number of minutes.

(0.76[tex])^t[/tex]  = 0.146

Taking log both side we get

t log 0.76 = log 0.146

t = 7.00724

t = 7 minutes

Learn more about Percentage here:

https://brainly.com/question/29306119

#SPJ7

Answer:

∠C = 35°

∠D = 76°

∠DEC = 69°

Step-by-step explanation:

    Exterior angle equals the sum of opposite interior angles (remote angles).

               ∠C + ∠D = ∠DEF

      3y + 5 + 7y + 6 =  111°

      3y + 7y + 5 + 6 = 111

Combine like terms,

              10y +  11 = 111

Subtract 11 from both sides,

                      10y = 111 - 11

                     10y  = 100

Divide both sides by 10

                       y = 100 ÷ 10

                       [tex]\boxed{y = 10}[/tex]

∠C = 3y + 5

      = 3*10 + 5

      = 30 + 5

[tex]\boxed{\bf \angle C = 35^\circ}[/tex]

∠D = 7y + 5

      = 7*10 + 6

     = 70 + 6

 [tex]\boxed{\bf \angle D = 76^\circ}[/tex]

∠C + ∠D + ∠DEC = 180°      {Angle sum property of triangle}

  35 + 76 + ∠DEC = 180

            111 + ∠DEC = 180

                    ∠DEC = 180 - 111

                   [tex]\boxed{\bf \angle DEC = 69^\circ}[/tex]

(a) The probability that Shelia is diagnosed as having gestational diabetes is  0.1586.

(b) The probability that Shelia is diagnosed as needing further testing for gestational diabetes is 0.0416.

A Z-score is a metric that quantifies how closely a value relates to the mean of a set of values.

Standard deviations from the mean are used to measure Z-score. A Z-score of zero means the data point's score is the same as the mean score.

Given:

Shelia's doctor is concerned that she may suffer from gestational diabetes (high blood glucose levels during pregnancy).

There is variation both in the actual glucose level and in the blood test that measures the level.

In a test to screen for gestational diabetes, a patient is classified as needing further testing for gestational diabetes if the glucose level is above 120 milligrams per deciliter (mg/dL) one hour after a sugary drink. Shelia's measured glucose level one hour after the sugary drink varies according to the Normal distribution with = 105 mg/dL and = 15 mg/dL.

(a) The sample mean [tex]\bar{X}[/tex] = 120

The mean = 105

And standard deviation = 15

t = 1 - P(X ≤ 120 - 105/15)

t = 1 - P(X ≤ 15/15)

The P-Value is 0.158655.

(b) The sample mean [tex]\bar{X}[/tex] = 120

The mean = 105

And standard error = 15/√3 =

t = 1 - P(X ≤ 120 - 105/8.66025403784)

t = 1 - P(X ≤ 15/8.66025403784)

The P-Value is 0.041637.

Therefore, the P-Value is 0.041637.

To learn more about the z score;

https://brainly.com/question/15016913

#SPJ1