Find the total labour charges for a job that takes; 2 1/2hours Time (h) 1/2 1 2 3 4 Charges 1,200 1400 1 800 2,200 2,600​

To determine whether a transformation is one-to-one or onto, one must analyze its behavior and properties, such as passing the horizontal line test for one-to-one or checking if the range equals the codomain for onto.

In mathematical terms, a transformation refers to a function that maps elements from one set, called the domain, to another set, called the range. A transformation is said to be one-to-one if no two distinct elements in the domain are mapped to the same element in the range. This means that each element in the range is associated with a unique element in the domain.

On the other hand, a transformation is onto if every element in the range is mapped to by at least one element in the domain. In other words, for each element in the range, there exists at least one element in the domain that maps to it.

To determine whether a transformation is one-to-one or onto, one can analyze its properties and behavior. For example, a transformation is one-to-one if and only if it passes the horizontal line test. This means that no two points in the domain map to the same point on a horizontal line. To determine if a transformation is onto, one can check if the range of the transformation equals the codomain.

Learn more about transformation here

brainly.com/question/30077498

#SPJ4

The given question is incomplete, the complete question is:

How to determine the transformation is one to one and/or onto?

As a result, AB = 52 and AC = BC = 5 as AC and BC are both the circle's radii since A and B are points of tangency .

A circle is a closed object made up of all points in a plane that are separated from the center by a predetermined distance, known as the radius. The diameter is the distance across the circle that passes through its center, while the circumference is the distance around the circle. The ratio of a circle's circumference to its diameter is always pi (), or roughly 3.14. Pi is also known as the proportionality constant. Circles are significant geometric forms that are used frequently in mathematics, science, and daily life.

given

AC and BC are both the circle's radii since A and B are points of tangency. Hence, AC = BC = 5.

We can apply the Pythagorean theorem to segment AB as follows:

[tex]AB^2 = 52 + 52 \\AB^2 = AC^2 + BC^2[/tex]

AB² = 50

AB = √50 = 5√2

As a result, AB = 52 and AC = BC = 5 as AC and BC are both the circle's radii since A and B are points of tangency .

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

Answer:

hope it helps

Step-by-step explanation:

based on the given condition formulate

The probability of spinning a slice that is not yellow is equal to the total number of non-yellow slices divided by the total number of slices.

Total number of non-yellow slices = 9 (3 red + 5 blue)

Total number of slices = 12

Therefore, the probability of spinning a slice that is not yellow is 9/12 or 75%.

Answer:

680 ways

Step-by-step explanation:

C(17, 3) gives 17! / (14! 3!), or (17*16*15)/6 = 680 ways to select the 3 individuals.

Hope this helped!

The answer is A, rhombus.

If cotθ = 3/4 then cosθ = -3/5 is the right option according to the rules of trigonometry.

Trigonometry is a branch of mathematics that deals with the study of relationships between the sides and angles of triangles. It is primarily concerned with the study of the six trigonometric functions: sine, cosine, tangent, cosecant, secant, and cotangent, and their applications in various fields such as engineering, physics, and navigation.

A triangle is a three-sided polygon, and its angles are the angles formed by the intersection of its sides. The sum of the angles in a triangle is always 180 degrees.

First, we know that cot(0) = adjacent / opposite = 3/4.

In quadrant 3, the adjacent side is negative and the opposite side is positive, so we can draw a right triangle in quadrant 3 with adjacent side -3 and opposite side 4.

The hypotenuse can be found using the Pythagorean theorem.

h² = adjacent²+ opposite²

h² = (-3)^2 + 4^2

h²= 9 + 16

h² = 25

h = 5

So we have a right triangle in quadrant 3 with adjacent side -3, opposite side 4, and hypotenuse 5.

Using the definitions of the trigonometric functions, we can find the values of the other functions:

sin(0) = opposite / hypotenuse = 4/5

cos(0) = adjacent / hypotenuse = -3/5

tan(0) = opposite / adjacent = -4/3

csc(0) = hypotenuse / opposite = 5/4

sec(0) = hypotenuse / adjacent = -5/3

cot(0) = adjacent / opposite = 3/4 (given)

To know more about Trigonometry, visit:

brainly.com/question/29002217

#SPJ1

The area under the curve y = 1/ (x^2 + 6x -16) from x = t to x = 6 is 1/10( ln(4) - 1/10 ln(t+8))

To find the area under the curve y = 1/ (x^2 + 6x -16) from x = t to x = 6, where t > 2, we need to evaluate the definite integral:

∫[t,6] 1/ (x^2 + 6x -16) dx

To solve this integral, we can use partial fraction decomposition. First, we factor the denominator:

x^2 + 6x -16 = (x+8)(x-2)

Then, we can write:

1/ (x^2 + 6x -16) = A/(x+8) + B/(x-2)

Multiplying both sides by (x+8)(x-2), we get:

1 = A(x-2) + B(x+8)

Setting x = -8, we get:

1 = A(-10)

So, A = -1/10.

Setting x = 2, we get:

1 = B(10)

So, B = 1/10.

Therefore, we can write:

1/ (x^2 + 6x -16) = -1/10(x+8) + 1/10(x-2)

Substituting this into the integral, we get:

∫[t,6] 1/ (x^2 + 6x -16) dx = ∫[t,6] (-1/10(x+8) + 1/10(x-2)) dx

Integrating, we get:

= [-1/10 ln|x+8| + 1/10 ln|x-2|] from t to 6

= 1/10 ln|6-2| - 1/10 ln|t+8|

= 1/10 ln(4) - 1/10 ln(t+8)

Therefore, the area is: 1/10( ln(4) - 1/10 ln(t+8))

To know more about definite integral:

https://brainly.com/question/29974649

#SPJ4

_____The given question is incomplete, the complete question is given below:

begin by finding the area under the curve from to y = 1/ (x^2 + 6x -16) from x = t to x = 6, t>2 this area can be written as the definite integral

The graph of the system of equations is shown below:

The solution of the system is given by the point of intersection of the two lines which is (20/7, -7/2).

Answer:

m = 2/3

Step-by-step explanation:

Answer:

[tex] \frac{2}{3} [/tex]

Step-by-step explanation:

slope is

[tex] m = \frac{rise}{run} = \frac{y 2 - y1}{x2 - x1} [/tex]

(0,0) & (3,2)

[tex] m = \frac{2 - 0}{3 - 0} = \frac{2}{3} [/tex]

Mathematicians divide the world of numbers into seven subsets, namely natural numbers, whole numbers, integers, rational numbers, irrational numbers, real numbers, and complex numbers.

Natural numbers: These are the counting numbers, starting from 1 and continuing indefinitely. They can also be denoted as "N" or "ℕ".

Whole numbers: These are the natural numbers, as well as zero. They can also be denoted as "W" or "ℤ⁺⁰".

Integers: These are the whole numbers, as well as their negative counterparts. They can also be denoted as "Z" or "ℤ".

Rational numbers: These are numbers that can be expressed as a fraction, where the numerator and denominator are integers (and the denominator is not zero). They can also be denoted as "Q" or "ℚ".

Irrational numbers: These are numbers that cannot be expressed as a fraction of two integers. They are often represented by decimal expansions that neither terminate nor repeat. Examples include π and the square root of 2.

Real numbers: These are all the rational and irrational numbers, taken together. They can also be thought of as numbers that can be located on a number line. They are often denoted as "R" or "ℝ".

Complex numbers: These are numbers of the form a + bi, where a and b are real numbers and i is the imaginary unit (defined as the square root of -1). Complex numbers can be added, subtracted, multiplied, and divided, just like real numbers. They are often denoted as "C" or "ℂ".

Learn more about numbers here

brainly.com/question/17267103

#SPJ4

a) Drawing of the situation is shown in below figure.

b) 0.75 radians

c) 42.97 degrees

Conversion is the process of changing a value from one unit or system of measurement to another.

a) The situation of the drawing: The center of the Ferris wheel is labeled "O", and its radius is 59 feet. Angela boards the Ferris wheel at point A and travels a distance of 44.3 feet along the arc to point B. The angle that she sweeps out along the arc is labeled θ.

(Drawing of the situation is shown in below figure)

b) The length of an arc of a circle by the formula:  s = rθ

Given, the radius of the circle is 59 feet and the length of the arc that Angela travels is 44.3 feet. So,

θ = s / r

θ = 44.3 / 59

θ ≈ 0.75 radians

Therefore, the angle that Angela sweeps out along the arc has a measure of approximately 0.75 radians.

c) To convert radians to degrees, we use the formula:

θ (in degrees) = θ (in radians) × 180 / π

θ (in degrees) = 0.75 × 180 / π

θ (in degrees) ≈ 42.97 degrees

Therefore, the angle that Angela sweeps out along the arc has a measure of approximately 42.97 degrees.

To know more about unit conversion, visit:

https://brainly.com/question/141163

#SPJ1

a) Drawing of the situation is shown in below figure.
b) 0.75 radians
c) 42.97 degrees

Conversion is the process of changing a value from one unit or system of measurement to another.

a) The situation of the drawing: The center of the Ferris wheel is labeled "O", and its radius is 59 feet. Angela boards the Ferris wheel at point A and travels a distance of 44.3 feet along the arc to point B. The angle that she sweeps out along the arc is labeled θ.
(Drawing of the situation is shown in below figure)
b) The length of an arc of a circle by the formula:  s = rθ
Given, the radius of the circle is 59 feet and the length of the arc that Angela travels is 44.3 feet. So,
θ = s / r
θ = 44.3 / 59
θ ≈ 0.75 radians
Therefore, the angle that Angela sweeps out along the arc has a measure of approximately 0.75 radians.
c) To convert radians to degrees, we use the formula:
θ (in degrees) = θ (in radians) × 180 / π
θ (in degrees) = 0.75 × 180 / π
θ (in degrees) ≈ 42.97 degrees
Therefore, the angle that Angela sweeps out along the arc has a measure of approximately 42.97 degrees.

To know more about conversion, visit:
https://brainly.com/question/23718955
#SPJ1

The marginal probability function E(Y1) = 2/3, variance of a binomial distribution is V(Y1) = 4/9, and E(Y1-Y2) = 0, using the joint probability function for Y1 and Y2 and the fact that they have binomial distributions with n=2 and p=1/3.

The marginal probability function of Y1 is binomial with n=2 and p=1/3, as given in Exercise 5.19. Therefore, we have:

E(Y1) = np = 2(1/3) = 2/3.

The variance of a binomial distribution with parameters n and p is given by np(1-p), so we have:

V(Y1) = np(1-p) = 2(1/3)(2/3) = 4/9.

We can use the linearity of expectation to find E(Y1-Y2):

E(Y1 - Y2) = E(Y1) - E(Y2)

We know that E(Y1) = 2/3 from part (a), but we need to find E(Y2). Using the same reasoning as in part (a), we find that the marginal probability function of Y2 is also binomial with n=2 and p=1/3. Therefore, we have:

E(Y2) = np = 2(1/3) = 2/3.

Substituting these values into the expression for E(Y1-Y2), we get:

E(Y1 - Y2) = 2/3 - 2/3 = 0.

Therefore, E(Y1-Y2) is equal to 0.

To know more about marginal probability function:

https://brainly.com/question/24233567

#SPJ4

Answer:

Step-by-step explanation:

it is false. 0 is not a natural number. it is a whole number

The velocity vector and position vector and position vector at t=4 is r(4) = (e₄+2)i+36j - 44k.

a(t) = eti - 6k

Since we know that v(t) = ∫ a(t) dt

= ∫ (eti - 6k) dt

= ∫6ti-6tk+c

where c is the arbitrary vector valued constant

since it is given that

v(0) = 2i + 9j + k

therefore from above

v(0) = e * 0i - 6(0) * k + c

2i + 9j + k =i+c

C= i +9j+k

therefore,

v(t) = eti - 6tk + i + 9j + k

= (et + 1) * i + 9j + (- 6t + 1) * k

Since we know that velocity vector can be found by integration of acceleration vector.

Since, v(t) = (et + 1) * i + 9j + (- 6t + 1) * k

and we know that

R(t) = ∫ v(t)dt

= ∫ of [(a + 1)i + 9j+(-6t + 1)k]dt =(a+t)i+9tj+(-3ta+t)k+C

where C is an arbitrary vector constant.

Now,

Since it given that r(0)=0 therefore

r(0) =(e0+1)+9(0)j)+(-3(0)2+0)x+C

0=2i+ C

C= -2i

therefore

r(t)= (et+t)i+9tj+(-3t+t)k-2i

r(t)=(a+t-2)1+9tj+(-3t+t)k

Since we know that position vector can be found by integration of velocity vector

r(4) = (e4+4-2)i+9(4)j + (-3(4)+4)k

r(4) = (e4+2)1+36j-44k

Now we have found the velocity vector and position vector and position vector at t=4 which are as follows:

v(t) =(et+1)i+9j+(-6t+1)k

r(t) =(et+t-2)i+9tj+(-3t2+t)k

r(4) = (e₄+2)i+36j - 44k

Learn more about velocity at:

https://brainly.com/question/14378093

#SPJ4

Answer:

21 years old

Step-by-step explanation:

Set Alan's age as x, Bernice's age as y

2x=y

x-4+y-4=55

x+y=63

3y=63

x=21

y=42

The set is a basis of the space of upper-triangular matrices. The coordinates of with respect to this basis is B⁻¹ × p

In mathematics, a polynomial is an expression consisting of indeterminates (also called variables) and coefficients that includes only the operations of addition, subtraction, multiplication, and power of variables with a positive integer. Polynomials appear in many areas of mathematics and science. For example, they are used to create polynomial equations that encode a wide variety of problems, from elementary word problems to complicated scientific problems; they are used to define polynomial functions that appear in settings ranging from basic chemistry and physics to economics and social science; they are used in calculus and numerical analysis to approximate other functions. In advanced mathematics, polynomials are used to construct polynomial circles and algebraic varieties, which are central concepts in algebra and algebraic geometry.

According to the Question:

Converting the polynomials into vectors by taking their coordinate vectors with respect to the standard basis of P³, {1, x, x²}.

Thus B = [-1, 0, -2], [-2, 3, -4], [-2, 9, -8].

And p is [-6, 21, -24].

⇒ [p(x)]B = B⁻¹ × p

Complete Question:

the set B = [tex]\left[\begin{array}{ccc}1&1&\\0&0\end{array}\right][/tex], [tex]\left[\begin{array}{ccc}0&1\\0&-1\end{array}\right][/tex], [tex]\left[\begin{array}{ccc}0&0&\\0&-2\end{array}\right][/tex] is a basis of the space of upper triangular 2 × 2 matrices . Find the coordinates of

M =  [tex]\left[\begin{array}{ccc}-6&-3&\\0&-5&\end{array}\right][/tex] with the respect to this basis.

Learn more about Coordinates:

https://brainly.com/question/16634867

#SPJ4

Answer:

this is when you want to draw a sketch of a building

Answer: MN || VT

Step-by-step explanation:

We can see that MN is vertical, and the only angle that is vertical, is VT. And we can see that they don't obstruct their lines (meaning that they don't intersect), and keep going for infinity. So, VT would be the only parallel line to the one given.

Hope this helps

The fixed price of the land is 296257.50.

What is discount?

Discount is the state of having a bond's price lower than its face value. The difference between the purchase price and the item's par value is the discount.

Discounts are different types of price reductions or deductions from a product's cost. It is frequently employed in consumer transactions when consumers receive discounts on a range of goods. The % discount rate is provided.

Here the discount on the fixed price = 10%

Commission for the broker = 5%

If total amount = 100%+10% = 110%

Then received amount = [tex]\frac{110}{100}\times256500[/tex]

=> Received amount =  282150

Now 5% commission then,

=> [tex]\frac{105}{100}\times 282150[/tex] = 296257.50.

Hence the fixed amount of the land before discount is 296257.50.

To learn more about discount refer the below link

https://brainly.com/question/1548141

#SPJ1

Answer:

x=12

Step-by-step explanation:

2x-y=15

y=9

2x-9=15

2x=24

x=12

The transversal angle of 45 is angle6.

Two lines intersect at a location, creating an angle.

An "angle" is the term used to describe the width of the "opening" between these two rays. The character is used to represent it.

Angles are frequently expressed in degrees and radians, a unit of circularity or rotation.

In geometry, an angle is created by joining two rays at their ends. These rays are referred to as the angle's sides or arms.

An angle has two primary components: the arms and the vertex. T

he two rays' shared vertex serves as their common terminal.

Hence, The transversal angle of 45 is angle6.

Learn more on angles here click here:

brainly.com/question/2046046

#SPJ1

Answer: Consider the expression (2x − 3) − (-3x + 4).

First, distribute the negative sign and rewrite the expression:

2x − 3 + 3x – 4.

Then, model the polynomial.

There are no zero pairs, so the difference is 5x − 7.

Step-by-step explanation:

PLATO

The number of words formed with letters of the word 'PROBLEM' which neither start with O nor end with E is 3600.

The word PROBLEM has 7 letters, which can be arranged in 7! (factorial) ways, i.e. [tex]7*6*5*4*3*2*1 = 5040.[/tex]

Now to calculate the number of words formed with letters of the word 'PROBLEM' which neither start with O nor end with E, we can first calculate the number of words which start with O or end with E.

For words starting with O, there are 6 letters left and these can be arranged in 6! ways, i.e.[tex]6*5*4*3*2*1 = 720.[/tex]

For words ending with E, there are again 6 letters left and these can be arranged in 6! ways, i.e. [tex]6*5*4*3*2*1 = 720[/tex].

Now the total number of words which start with O or end with E will be the sum of two, i.e. 720 + 720 = 1440.

Therefore, the number of words formed with letters of the word 'PROBLEM' which neither start with O nor end with E will be the total number of words minus the total number of words which start with O or end with E, i.e. 5040 - 1440 = 3600.

Learn more about total number here:

https://brainly.com/question/14690449

#SPJ1