Fit a linear function of the form f(t) = c0 +c1t to the data points
(0,3), (1,3), (1,6), using least squares.
Rate within 12hrs.

Factor: In the analysis of variance (ANOVA), a factor is an independent variable that is used to divide the total variation in a set of data into different groups or categories. Factors can be either fixed or random and are used to determine whether or not there is a significant difference between groups or categories.

Level: The level of a statistic is a measurement of the parameter on a group of subjects. It is a way to classify the data and measure the variability of a population. Levels can be ordinal, nominal, interval, or ratio, depending on the type of data being analyzed.Convert a measurement from ratio to ordinal scale: Converting a measurement from a ratio to an ordinal scale involves reducing the level of measurement of the data. This is often done when a researcher wants to simplify the data and make it easier to analyze. For example, if a researcher wants to measure the level of education of a group of people, they may convert their data from a ratio scale (where education level is measured on a scale from 0 to 20) to an ordinal scale (where education level is categorized as high school, college, or graduate).Two-factor study: A two-factor study is a research study that has two independent variables. This type of study is used to determine how two variables interact with each other and how they influence the outcome of the study. The two independent variables are often referred to as factors, and they are used to divide the data into different groups or categories. Two-factor studies are commonly used in experimental research, but can also be used in observational studies to help identify causal relationships between variables.

Learn more about categories here

https://brainly.com/question/30929554

#SPJ11

The solution is : Length of EH = 9.6cm.

We have,

Pythagoras' theorem, is a relation among the three sides of a right triangle.

It states that the area of the square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides.

H² = O² + A²

Where H = Hypotenuse side

O = Opposite side

A = Adjacent side

To find the length of side EH, we work with what we have been given.

We know the diagonals of rectangle ABCD is the hypotenuse of the side, with this we can find the needed height using the expression above.

Note that side EH is the same as side AD

H = 17cm

A = 14cm

17² = 14² + Opp²

Opp² = 17² - 14²

Opp² = 289 - 196

Opp² = 93

Opp = √93

Opp = 9.6cm

To learn more on Pythagoras' theorem, visit

brainly.com/question/20591514

#SPJ1

complete question:

Work out the length of EH in the cuboid below. Give your answer in centimetres (cm) to 1 d.p. E H 19 cm F G A 17 cm 14 cm B Not drawn accurately​

The truth value of Proposition 1, [A ⊃ ~(B · Y)] ≡ ~[B ⊃ (X · ~A)], is true when A and B are true, and X and Y are false.

First, we'll evaluate each part of the proposition:

1. A ⊃ ~(B · Y): Since A is true and B · Y is false (due to Y being false), the statement becomes "true ⊃ ~false", which simplifies to "true ⊃ true". This is true.

2. B ⊃ (X · ~A): Since B is true, X is false, and ~A is false, the statement becomes "true ⊃ (false · false)", which simplifies to "true ⊃ false". This is false.

Now, we'll evaluate the equivalence ([A ⊃ ~(B · Y)] ≡ ~[B ⊃ (X · ~A)]): The statement becomes "true ≡ ~false", which simplifies to "true ≡ true". Therefore, the truth value of Proposition 1 is true.

To know more about  Proposition click on below link:

https://brainly.com/question/14789062#

#SPJ11

The part of the figure of a circle labeled as angle APB is

The part of the circle marked by a question marked as angle APB is solved using the relationship below

given angle formed by the tangents = major arc ACB - 180 degrees

information given in the problem includes

given angle formed by the tangents = angle APB

major arc ACB = 266

substituting in these values results to

given angle formed by the tangents = 266 degrees - 180 degrees

given angle formed by the tangents = 86 degrees

hence the required side, which is angle APB is 86 degrees

Learn more about tangent to circle at

https://brainly.com/question/11067500

#SPJ1

To calculate the cost of 4.25 kg of potatoes based on the given information that 2.5 kg costs $1.40. The cost can be determined by finding the ratio of the weights and applying it to the given cost.

Let's set up a proportion to find the cost of 4.25 kg of potatoes. We know that 2.5 kg of potatoes cost $1.40. So, we can write the proportion as follows:

2.5 kg / $1.40 = 4.25 kg / x

To solve for x (the cost of 4.25 kg of potatoes), we cross-multiply:

2.5 kg * x = $1.40 * 4.25 kg

Simplifying the equation:

2.5x = $1.40 * 4.25

Multiplying the numbers:

2.5x = $5.95

Now, divide both sides of the equation by 2.5 to isolate x:

x = $5.95 / 2.5

Evaluating the division:

x = $2.38

Therefore, the cost of 4.25 kg of potatoes is $2.38.

Learn more about ratio here:

https://brainly.com/question/13419413

#SPJ11

To evaluate the surface integral, we first need to find a parameterization of the surface S. The surface integral ∫∫S (x - y)dS, where S is the portion of the plane x + y + z = 1 that lies in the first octant, evaluates to 1/2.

To evaluate the surface integral, we first need to find a parameterization of the surface S. The plane x + y + z = 1 can be parameterized as x = u, y = v, z = 1 - u - v, where 0 ≤ u ≤ 1 and 0 ≤ v ≤ 1 - u. The partial derivatives of x and y with respect to u and v are both 1, while the partial derivative of z with respect to u is -1 and the partial derivative of z with respect to v is -1.

Using this parameterization, we can write the surface integral as            ∫∫D (x(u,v) - y(u,v))√(1 + z_u^2 + z_v^2)dudv,

where D is the region in the uv-plane corresponding to the first octant. Simplifying this expression, we get ∫∫D (u - v)√3dudv. Integrating this expression over the region D, we get 1/2, which is the final answer.

Learn more about surface integral here:

https://brainly.com/question/32088117

#SPJ11

For the linear equations provided by the coordinates in the table;

The first equation of this system is y = -2x.

The second equation of this system is y = x - 3.

The solution to the system is (1, -2).

We have four points (-5,10), (-1,2), (0,0), and (11,-22) for first equation, and four points (-8,-11), (-2,-5), (1,-2), and (7,4) the second equation.

The slope (m) is given by the formula (y2 - y1) / (x2 - x1).

For the first line, we can use the points (-5,10) and (-1,2)

m1 = (2 - 10) / (-1 - (-5)) = -8/4 = -2.

the first equation is y = -2x

the second line, we can use the points (-8,-11) and (-2,-5)

m2 = (-5 - -11) / (-2 - -8) = 6/6 = 1.

the second line has a slope of 1,

the equation should have the form y = x + c.

To find c, we can use one of the points, for instance (-2,-5):

-5 = -2 + c => c = -5 + 2 = -3.

So, the second equation is y = x - 3.

the solution to the system, we need to find where the two lines intersect.

y = -2x

y = x - 3

Setting both equation equally

-2x = x - 3

=> 3x = 3

=> x = 1.

Substituting x = 1 into the first equation

y = -2(1) = -2.

the solution to the system of linear equation would be (1, -2).

Find more exercises on linear equation;

https://brainly.com/question/29739212

#SPJ1

The list contains important information that would help library users. They are vital as they offer guidance on how to utilize the resources and services available in the library.

There are several facts on the list that will guide you when you are planning to utilize the library. Here are some of the most crucial ones you should note:1. The library has a computerized catalog that lists all the materials available in the library.2. There is a computer lab in the library where users can access the internet.3. The library has quiet study rooms that can be used by individuals and groups.4. Reference librarians can provide assistance in researching topics.5. Materials can be borrowed for a period of three weeks.The list contains a range of facts about the library's facilities and services, and it is essential to know them as a library user. Users should ensure they adhere to the library's policies and procedures to make the most out of the library's resources and services. Additionally, users should ask librarians for assistance when they need it, as librarians are there to assist them.

Learn more about Librarians here,To assist faculty and students with

research, a school librarian must be

which of the following?

https://brainly.com/question/30329075

#SPJ11

Let x, y, and z be the number of vehicles of type A, B, and C, respectively.

The objective is to maximize the shipping capacity in ton-miles per day, which can be expressed as:

capacity = payload capacity * operating speed * operating hours per day

For vehicle A, the capacity is:

10 * 45 * 18 * x = 8100x

For vehicle B, the capacity is:

20 * 40 * 18 * y = 14400y

For vehicle C, the capacity is:

18 * 40 * 21 * z = 15120z

The total cost of purchasing the vehicles cannot exceed the allocated budget of $800,000:

26000x + 36000y + 42000z ≤ 800000

The total number of drivers required cannot exceed the available number of 150 drivers:

x + 2y + 2z ≤ 150

The total number of vehicles cannot exceed 30:

x + y + z ≤ 30

The objective function to be maximized is the total capacity:

Z = 8100x + 14400y + 15120z

Subject to:

26000x + 36000y + 42000z ≤ 800000

x + 2y + 2z ≤ 150

x + y + z ≤ 30

x, y, z ≥ 0 (since the company cannot purchase negative vehicles)

This is a linear programming problem that can be solved using standard techniques, such as the simplex method.

To learn more about simplex method. refer below

https://brainly.com/question/30970325

#SPJ11

Assuming that the pattern of the first few terms continues, the formula for the general term an of the sequence is:
an = (-1)^(n+1) / 6^(n-1)

To find a formula for the general term an of this sequence, we need to identify the pattern in the given terms. Looking at the sequence, we can see that each term is either a positive or negative fraction with a denominator that is a power of 6. Specifically, the denominators of the terms are 1, 6, 36, 216, 1296, which are all powers of 6.

Moreover, we can see that the signs of the terms alternate: the first term is positive, the second term is negative, the third term is positive, and so on.

Based on these observations, we can write the formula for the nth term as follows:

an = (-1)^(n+1) / 6^(n-1)

Here, (-1)^(n+1) gives the alternating signs, and 6^(n-1) gives the denominator that is a power of 6.

Therefore, assuming that the pattern of the first few terms continues, the formula for the general term an of the sequence is:

an = (-1)^(n+1) / 6^(n-1)

Learn more about the general term:

https://brainly.com/question/28999301

#SPJ11

The product of the polynomials f(x) and g(x) is 6x⁴ + 13x³ + 23x² + 18x + 12.

The given polynomials are f(x) = 2x² + 3x + 4 and g(x) = 3x² + 2x + 3 in some polynomial ring.

To find the sum of the polynomials, we add the like terms:

f(x) + g(x) = (2x² + 3x + 4) + (3x² + 2x + 3)

= 5x² + 5x + 7

Therefore, the sum of the polynomials f(x) and g(x) is 5x² + 5x + 7.

To find the product of the polynomials, we multiply each term in f(x) by each term in g(x), and then add the resulting terms with the same degree:

f(x) * g(x) = (2x² + 3x + 4) * (3x² + 2x + 3)

= 6x⁴ + 13x³ + 23x² + 18x + 12

Therefore, the product of the polynomials f(x) and g(x) is 6x⁴ + 13x³ + 23x² + 18x + 12.

Learn more about polynomials here

https://brainly.com/question/4142886

#SPJ11

By calculations, the width of the walkway should be 5 feet

From the question, we have the following parameters that can be used in our computation:

Dimension = 12 feet by 8 feet

Area of the walkway = 396 feet

The missing diagram is attached

This means that

Area = (12 + 2x) * (8 + 2x)

Recall that

Area of the walkway = 396 feet

So, we have

(12 + 2x) * (8 + 2x) = 396

When solved using a graphing tool, we have

x = 5

Hence, the width of the walkway should be 5 feet

Read more about area at

https://brainly.com/question/24487155

#SPJ1

Part A: dx/dy at y=4 equals 1/3. The correct option is (c) 1/3.

Part B: The value of dx/dy at y=2 is 1/5. the answer is (c) 1/5.

C. f'(x) = (1/2) * sqrt(x)^-1.

Part A:
We know that y=f(x) and x=f^-1(y) are mutually inverse functions, which means that f(f^-1(y))=y and f^-1(f(x))=x. Using implicit differentiation, we can find the derivative of x with respect to y as follows:

d/dy [f^-1(y)] = d/dx [f^-1(y)] * d/dy [x]
1 = (1/ (dx/dy)) * d/dy [x]
(dx/dy) = d/dy [x]

Now, we are given that f(1)=4 and dy/dx = -3 at x=1. Using the chain rule, we can find the derivative of y with respect to x as follows:

dy/dx = (dy/dt) * (dt/dx)
-3 = (dy/dt) * (1/ (dx/dt))
(dx/dt) = -1/3

We want to find dx/dy at y=4. Since y=f(x), we can find x by solving for x in terms of y:

y = f(x)
4 = f(x)
x = f^-1(4)

Using the inverse function property, we know that f(f^-1(y))=y, so we can substitute x=f^-1(4) into f(x) to get:

f(f^-1(4)) = 4
f(x) = 4

Now, we can find dy/dx at x=4 using the given derivative dy/dx = -3 at x=1 and differentiating implicitly:

dy/dx = (dy/dt) * (dt/dx)
dy/dx = (-3) * (dx/dt)

We know that dx/dt = -1/3 from earlier, so:

dy/dx = (-3) * (-1/3) = 1

Finally, we can find dx/dy at y=4 using the formula we derived earlier:

(dx/dy) = d/dy [x]
(dx/dy) = 1/ (d/dx [f^-1(y)])

We can find d/dx [f^-1(y)] using the fact that f(f^-1(y))=y:

f(f^-1(y)) = y
f(x) = y
x = f^-1(y)

So, d/dx [f^-1(y)] = 1/ (dy/dx). Plugging in dy/dx = 1 and y=4, we get:

(dx/dy) = 1/1 = 1

Therefore, the answer is (c) 1/3.

Part B:
Let y=f(x) and x=h(y) be mutually inverse functions. We know that f '(2)=5, which means that the derivative of f(x) with respect to x evaluated at x=2 is 5. Using the chain rule, we can find the derivative of x with respect to y as follows:

dx/dy = (dx/dt) * (dt/dy)

We know that x=h(y), so:

dx/dy = (dx/dt) * (dt/dy) = h'(y)

To find h'(2), we can use the fact that y=f(x) and x=h(y) are mutually inverse functions, so:

y = f(h(y))
2 = f(h(2))

Differentiating implicitly with respect to y, we get:

dy/dx * dx/dy = f'(h(2)) * h'(2)
dx/dy = h'(2) = (dy/dx) / f'(h(2))

We know that f'(h(2))=5 from the given information, and we can find dy/dx at x=h(2) using the fact that y=f(x) and x=h(y) are mutually inverse functions, so:

y = f(x)
2 = f(h(y))
2 = f(h(x))
dy/dx = 1 / (dx/dy)

Plugging in f'(h(2))=5, dy/dx=1/(dx/dy), and y=2, we get:

dx/dy = h'(2) = (dy/dx) / f'(h(2)) = (1/(dx/dy)) / 5 = (1/5)

Therefore, the answer is (c) 1/5.

Part C:
We are given that f(x)= for x>0. Differentiating with respect to x using the power rule, we get:

f'(x) = (1/2) * x^(-1/2)

Therefore, f'(x) = (1/2) * sqrt(x)^-1.

To know more about implicit differentiation, refer to the link below:

https://brainly.com/question/11887805#

#SPJ11

The value of x, y and z in the given rhombus are -81, 36 and -20 respectively.

Given angles of a rhombus as,

(-x - 8)⁰

107⁰

(3y - 1)⁰

(-4z - 7)°

Here, the figure is given below.

Opposite angles of a rhombus are equal.

So,

3y - 1 = 107

3y = 108

y = 36

Also, adjacent angles are supplementary for rhombus.

-x - 8 + 107 = 180

-x = 81

x = -81

-4z - 7 + 107 = 180

-4z = 80

z = -20

Learn more about Rhombus here :

https://brainly.com/question/12665650

#SPJ1

The equation X/y = w/z satisfies the Dividendo Theorem.

The Dividendo Theorem, also known as the Proportional Division Theorem or the Constant Ratio Theorem, is a principle in mathematics that relates to ratios. According to the theorem, if two ratios are equal, then the ratios of their corresponding parts (dividendo) are also equal.

In the given equation X/y = w/z, we have two ratios on both sides of the equation. To determine if the equation satisfies the Dividendo Theorem, we need to compare the corresponding parts.

In this case, the corresponding parts are X and w, and y and z. If X/y = w/z, then we can conclude that the ratios of their corresponding parts are equal.

To understand why this is true, consider the concept of ratios. A ratio expresses the relationship between two quantities. When two ratios are equal, it means that the relationship between the corresponding quantities in each ratio is the same. In other words, the relative size or proportion of the quantities remains constant.

By applying the Dividendo Theorem to the equation X/y = w/z, we can determine that the ratios of X to y and w to z are equal. This implies that the relative sizes or proportions of X and y are the same as those of w and z.

Therefore, we can confidently say that the equation X/y = w/z satisfies the Dividendo Theorem.

Visit here to learn more about Dividendo Theorem:

brainly.com/question/31770231

#SPJ11

The probability that x < 30, given a population mean of 54 and a standard deviation of 8, is 0.13%.

To find the probability that x < 30, we can use the properties of a normal distribution. Given a population mean of 54 and a standard deviation of 8, we can calculate the z-score corresponding to the value of 30 using the formula:

[tex]\[ z = \frac{x - \mu}{\sigma} \][/tex]

where x represents the value of interest, μ is the population mean, and σ is the standard deviation.

Substituting the given values, we have:

[tex]\[ z = \frac{30 - 54}{8} = -3 \][/tex]

Next, we consult a standard normal distribution table or use statistical software to find the probability associated with the z-score of -3. The probability of obtaining a value less than 30 can be interpreted as the area under the standard normal curve to the left of the z-score -3.

By referring to the standard normal distribution table or using software, we find that the probability associated with a z-score of -3 is approximately 0.0013. Therefore, the probability that x < 30, given the provided population mean and standard deviation, is approximately 0.0013 or 0.13%.

Learn more about probability

brainly.com/question/31828911

#SPJ11

Answer:

-------------------

There are 13 clubs and 13 hearts in the deck.

First, find the number of ways to choose 2 clubs out of 13:

Next, find the number of ways to choose 3 hearts out of 13:

Now, multiply these two results:

A truth table is a table that shows the output of a logical expression for all possible combinations of input values.

(a) Truth table for f(x, y, z) = x + y + z:

x y z f(x, y, z)

0 0 0 0

0 0 1 1

0 1 0 1

0 1 1 1

1 0 0 1

1 0 1 1

1 1 0 1

1 1 1 1

(b) Canonical DNF for f(x, y, z) using the truth table:

f(x, y, z) = (¬x ∧ ¬y ∧ z) ∨ (¬x ∧ y ∧ ¬z) ∨ (¬x ∧ y ∧ z) ∨ (x ∧ ¬y ∧ ¬z) ∨ (x ∧ ¬y ∧ z) ∨ (x ∧ y ∧ ¬z) ∨ (x ∧ y ∧ z)

(c) Canonical CNF for f(x, y, z) using the truth table:

f(x, y, z) = (x ∨ y ∨ z) ∧ (x ∨ y ∨ ¬z) ∧ (x ∨ ¬y ∨ z) ∧ (x ∨ ¬y ∨ ¬z) ∧ (¬x ∨ y ∨ z) ∧ (¬x ∨ y ∨ ¬z) ∧ (¬x ∨ ¬y ∨ z)

what is combinations?

Combinations refer to the number of ways in which a subset of elements can be selected from a larger set, disregarding the order of the elements. The formula for combinations is:

nCk = n! / (k! * (n - k)!)

where n is the total number of elements in the set, k is the number of elements in the subset, and ! denotes the factorial function (i.e., the product of all positive integers up to and including the given integer).

To learn more about  combinations visit:

brainly.com/question/19692242

#SPJ11

The correct answer to this question is a. The regression [tex]r_{2}[/tex] is a measure of the goodness of fit of your regression line. This means that it tells you how well the regression line fits the data and how much of the variation in the dependent variable can be explained by the independent variable. In other words, it is a measure of the strength of the relationship between the two variables being analyzed.

The determinant is a mathematical term used in linear algebra that helps determine the properties of a matrix. It is not directly related to the regression [tex]r_{2}[/tex] value, so option c is incorrect. Option b is also incorrect as the regression [tex]r_{2}[/tex] value does not determine whether or not x causes y. Finally, option d is also incorrect as ess and tss are not related to the goodness of fit of the regression line.

Overall, the regression [tex]r_{2}[/tex] value is an important measure in determining the quality of a regression model and how well it can predict outcomes based on the independent variable. It is calculated by dividing the explained variance by the total variance and is expressed as a percentage. A high [tex]r_{2}[/tex] value indicates a strong relationship between the variables and a good fit of the regression line to the data, while a low [tex]r_{2}[/tex] value indicates a weak relationship and a poor fit.

Learn more about regression here:

https://brainly.com/question/17731558

#SPJ11

Amount of rainfall results in the maximum number of mosquitoes is 4 centimeters.

m(r) = -r(r-4)

m(r) = -r² + 4r

let's find the derivative of m(r) with respect to r:

m'(r) = -2r + 4

To find the critical points, we set m'(r) = 0 and solve for r:

-2r + 4 = 0

-2r = -4

r = 2

m''(r) = -2

Evaluating m''(2), we get

m''(2) = -2

the function m(r) has a maximum at r = 2.

Putting the value 2 we get

m(2) = -2² + 4(2)

m(2) = - 4 + 8

m(2) = 4

Therefore, the amount of rainfall that results in the maximum number of mosquitoes is 4 centimeters

To know more about maximum click here :

https://brainly.com/question/25120629

#SPJ4

The question is incomplete the complete question is :

The number of mosquitoes in Brooklyn (in millions of mosquitoes) as a function of rainfall (in centimeters) is modeled by m(r) = -r(r - 4) What amount of rainfall results in the maximum number of mosquitoes?

If we determine the estimated multiple linear regression equation to predict the overall score given the scores for comfort, amenities, and in-house dining, some steps need to be followed.

Steps are:
Step 1: Collect the data for each variable (Comfort, Amenities, and In-House Dining) along with the corresponding overall scores.
Step 2: Perform a multiple linear regression analysis on the collected data using statistical software or a calculator. This will give you the coefficients (b0, b1, b2, and b3) and the intercept (a) for the linear regression equation.
Step 3: Form the multiple linear regression equation using the coefficients and intercept obtained in Step 2. The equation will have the form:
Overall Score (Y) = a + b1*X1 + b2*X2 + b3*X3

Where:
Y = Overall Score
X1 = Comfort
X2 = Amenities
X3 = In-House Dining
a = Intercept
b1, b2, and b3 = Coefficients for Comfort, Amenities, and In-House Dining, respectively

To learn more about “equation” refer to the https://brainly.com/question/22688504

#SPJ11

Answer:

B

Step-by-step explanation:

B, this is the only one that is linear.

To write a5 and a8 as permutations of {0,1,...,8} in disjoint cycle form, we can start by identifying the elements that are fixed by the automorphisms. For a5, the elements fixed by ai are 1 and 8, so we can write a5 as (18)(0234576). For a8, the elements fixed by ai are 1 and 4, so we can write a8 as (14)(0235786).

In the cyclic group aut(z9), the automorphisms are essentially the permutations of the elements of the group. The automorphism ai sends 1 to i, where i is an element that is relatively prime to 9. To write a5 and a8 as permutations of {0,1,...,8} in disjoint cycle form, we need to identify the elements that are fixed by these automorphisms. The elements that are fixed are those that are mapped to themselves by the permutation. Once we have identified these fixed elements, we can write the permutation as a product of disjoint cycles.

In conclusion, a5 can be written as (18)(0234576) and a8 can be written as (14)(0235786) in disjoint cycle form. These permutations represent the automorphisms that send 1 to i, where gcd(i,9)=5. Identifying the fixed elements of the permutation is an important step in writing the permutation in disjoint cycle form.

To know more about permutation visit:

https://brainly.com/question/30649574

#SPJ11

How does one interpret a written work? One interprets a written work by explaining the meaning of the text. Therefore, the correct option is B.

By explaining the meaning of the text.

What is the meaning of interpreting a written work?

Interpreting a written work involves understanding the content of a written work. Interpretation enables one to appreciate, analyze, and evaluate the author's content. One can interpret a written work in different ways, including literary analysis, close reading, and critical thinking.

What does evaluating a written work involve?

Evaluating a written work involves analyzing and assessing the author's content. It entails assessing the strength and weaknesses of the content. Evaluation helps to provide an informed critique of the work.

What is the role of personal opinion in interpreting a written work?

Personal opinion plays a role in interpreting a written work since it enables the artist to engage with the text. However, it is crucial to avoid being biased while offering an opinion.

Therefore, one needs to ensure that their opinion is well-informed and supported by the text.

To know more about literary, visit

https://brainly.com/question/8971866

#SPJ11

If an event that "student-drives" is denoted by "A", and event "student go for movie" is denoted by B, then

(a) Probability that randomly selected student do not drive is 0.59,

(b) Probability for randomly selected student go for movie last-month is 0.57,

(c) Probability that randomly selected student "drives" or "go for movie past month" is 0.63.

(a) To find the probability that a randomly selected student does not drive, we can use the complement of event A, which is A'.

From the Venn-Diagram, We know that;

(A and [tex]B^{c}[/tex]) = 0.06, ([tex]A^{c}[/tex] and [tex]B^{c}[/tex]) = 0.37,  (A and B) = 0.35,  ([tex]A^{c}[/tex] and B) = 0.22,

We use the values of (A and [tex]B^{c}[/tex]) and (A and B) to calculate P(A):

P(A) = (A and [tex]B^{c}[/tex]) + (A and B) = 0.06 + 0.35 = 0.41;

So, P([tex]A^{c}[/tex]) = 1 - P(A) = 1 - 0.41 = 0.59,

The probability that randomly selected student do not drive is 0.59.

Part (b) : Probability that randomly selected student go for movies past month, is denoted by P(B).

So, P(B) = (A and B) + ([tex]A^{c}[/tex] and B) = 0.35 + 0.22 = 0.57.

The probability that randomly selected student go for movies past month is 0.57.

Part (c) : Probability that randomly selected student drives or go for movies past month, is denoted by union of events A and B, and We know that, P(A U B) = P(A) + P(B) - P(A and B);

Substituting the values,

We get,

= 0.41 + 0.57 - 0.35

= 0.63.

So, probability that randomly selected student drives or go for movies past month is 0.63.

Learn more about Probability here

https://brainly.com/question/21537697

#SPJ1

The exponential function [tex]f(x) = 14(0.87)^x[/tex] shows exponential decay, and it's graph is given by the image presented at the end of the answer.

The equation of the asymptote is given as follows:

y = 0.

An exponential function has the definition presented as follows:

[tex]y = ab^x[/tex]

In which the parameters are given as follows:

As the parameter b for this problem has an absolute value less than 1, the function represents exponential decay.

As there is no term adding/subtracting the exponential function, the asymptote is given as follows:

y = 0.

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

Answer:

c, 7/11

Step-by-step explanation:

there are 11 marbles total. 7 aren't blue. so p(not blue) = 7/11. Answer C.

Answer:

X=3.6

Step-by-step explanation:

True: A test statistic based on point estimation is used to construct the decision rule which defines the rejection region.

False: A p-value is the highest level (of significance) at which the observed value of the test statistic is insignificant. (A p-value is the lowest level of significance at which we can reject the null hypothesis.)

True: We prefer a short interval with a high degree of confidence.

False: Prediction interval (P.I) is always narrower than confidence interval (C.I) because there is less uncertainty in predicting an actual observation than estimating the average. (Prediction intervals are generally wider than confidence intervals due to the additional uncertainty in predicting individual observations.)

True: Sample is a subset of observation from a population. These should be representative of the population.

False: An estimate is a random variable of an estimator. (An estimator is a function of a random variable, while an estimate is a realization or observed value of that estimator.)

Learn more about confidence interval: https://brainly.com/question/15712887

#SPJ11