fix any errors in these proposed electron configurations. number of electrons in atom configuration: 31 proposed electron: 1s^2 2s^2 2p^6 2d^10 3s^2 3p^6 3d^1 4s^2

Answers

Answer 1

There is an error in the proposed electron configuration for the atom with 31 electrons. The correct electron configuration would be: [tex]1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^1[/tex]

In the proposed configuration, there is an extra [tex]2d^{10}[/tex] subshell. However, the 2d subshell does not exist. The subshells are labeled as 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, and so on. Therefore, the configuration must continue with [tex]3d^1[/tex] before filling the 4s subshell.
It is important to note that electron configurations follow the Aufbau principle, which states that electrons fill orbitals in order of increasing energy. Each orbital can hold a maximum of two electrons, with opposite spins. Therefore, it is essential to follow the correct order of subshells to determine the correct electron configuration.
In summary, the corrected electron configuration for an atom with 31 electrons is:
[tex]1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^1[/tex].

To learn more about electron configuration, refer:-

https://brainly.com/question/29157546

#SPJ11


Related Questions

Convert to grams
0.989 moles of phosphorus

1.21 moles of carbon dioxide



Answers

The conversion of the following moles to grams is as follows:

30.659g of phosphorus53.24g of carbondioxide

How to convert moles to mass?

The number of moles of a substance can be converted to mass using the following formula:

moles = mass ÷ molar mass

According to this question, 0.989 moles of phosphorus and 1.21 moles of carbon dioxide is given. The mass can be calculated as follows:

Molar mass of P = 31g/molMolar mass or carbondioxide = 44g/mol

mass of phosphorus = 31 × 0.989 = 30.659g

mass of carbondioxide = 44 × 1.21 = 53.24g

Learn more about mass at: https://brainly.com/question/21042927

#SPJ1

Based on the given information, which area is most likely to have more chemical weathering?

Answers

Based on the given information, the area that is most likely to have more chemical weathering is Area 1.

What is chemical weathering?

Rocks and soil undergo chemical weathering, which modifies their molecular structure. For instance, a procedure known as carbonation occurs occasionally when water and carbon dioxide from the air or soil combine. This results in carbonic acid, a weak acid that can dissolve rock.Solution, carbonation, hydration, oxidation, and reduction are key chemical weathering reactions. Through chemical reactions involving oxygen, surface and/or soil water, and various acids, these processes operate on the rocks to degrade, dissolve, or reduce them to a fine clastic form.The degradation of rock by chemical processes is referred to as chemical weathering, often known as decomposition or decay.Chemical weathering may also endanger human health by releasing harmful substances (such as excessive levels of arsenic, fluoride, heavy metals, etc.).

To learn more about chemical weathering refer to:

https://brainly.com/question/29784355

#SPJ4

2. Most of the elements in groups 16 through 18 are classified as
a. alkali metals.
c. nonmetals.
b. inner transition metals.
d. alkaline earth metals.

Answers

The correct option c. nonmetals. Nonmetals make up the majority of the elements of groups 16 through 18.

Explain the properties of elements of groups 16 through 18.

The position of an element on this periodic table has a significant impact on how that element is defined.

On the periodic table, there are a total of eight columns that seem to be taller than every other column. The primary group consists of those eight towering columns. Each element in the core group has a significant propensity to generate ions with predictable outcomes. The primary group elements constantly create charge between +1 and -4 based on the group number.

Elements of groups 16 through 18:

Non-metals make up the elements of groups 16 through 18. These elements mostly exist as vapors or fragile solids. They frequently function poorly as heat and electricity conductors. These non-metals are frequently gases at ambient temperature since they are known to have substantially lower melting temperatures than metals.

To know more about the elements, here

https://brainly.com/question/10753686

#SPJ1

What is C in bohr’s equation?

Answers

Formula

[tex]\ell=\frac{n h}{2 \pi}[/tex]

[tex]\ell = angular \: momentum[/tex]

[tex]n = principal quantum number \\ h = Planck's constant \\ \pi = pi[/tex]

Draw the product(s) of the following reactions.
CH3CH2CH2-CEC-CH2CH2CH3 (1. BHz / THE)/ (2. H2O2 / aqueous NaOH)

• You do not have to consider stereochemistry.
• Separate multiple products using the + sign from the drop-down menu.
• You do not have to explicitly draw H atoms.
• If no reaction occurs, draw the organic starting material.

Answers

1. Reaction of BH3 in basic condition with alkyne is the water addition to the triple bond and forming unstable enol form which in turn tautomerize to the ketone or aldehyde for terminal triple bond. Addition of water to the triple bond follows anti-Mark's rule.

In our reaction, 4-octyne under go water addition and forms a single product, 4-octanone (P1) because it is a symmetrical alkyne. Refer the below image for reaction. 2.  Reaction of H2 in Lindlar catalyst with alkyne is the H addition to the triple bond. The only product is Z alkene. In our reaction, (S)-pent-3-yn-2-ol under go reduction reaction with H2 in Lindlar catalyst and forms the Z - isomer (P2), (S,Z)-pent-3-en-2-ol. Refer the below image for reaction.

Learn more about alkenes here:

https://brainly.com/question/3614247

#SPJ4

A student looked up the naturally occurring isotopes of bromine and found the following information:

50.54% of the naturally occurring isotopes of bromine have an atomic mass of 78.92 u, while 49.46% of the naturally occurring isotopes of bromine have an atomic mass of 80.92 u.

Calculate the average atomic mass of bromine, showing all work:

Answers

The average atomic mass of bromine is derived from the isotopic masses and percentage abundance. The average atomic mass of  bromine is 80.31 amu.

What are isotopes?

Isotopes are atoms of same element with different atomic mass numbers. Almost all elements have two or more isotopes but not all of them are stable in nature.

The average atomic mass can be calculated from the isotopic mass and and percentage abundance as follows:

atomic mass = ∑ (isotopic mass × %abundance /100 )

Apply the isotopic mass and abundance of all isotopes given as follows:

atomic mass of  bromine = (50.54/100 × 78.92 amu) +  (49.96/100 × 80.92 amu) =80.31 amu.

Therefore, the atomic mass of  bromine is 80.31  amu.

Find more on isotopes:

http://brainly.com/question/21536220

#SPJ1

How can elements be important in our daily life?

Answers

Answer:

Explanation:

O2 gives your brain oxygen H2O Hydrates your body

Can someone please help me! No false answers please!!

The formula for a substance is D4 and its molar mass is 30 g. A student is given 150 g of the substance and is asked how many atoms are in the sample. She says there are 5 times Avogadro's number (6.022 x 102) of atoms in her sample. The student is in error, identify her error and explain what the correct answer should be.

Answers

The student's error is that she is assuming that the number of atoms in a sample is directly proportional to the mass of the sample. Avogadro's number (6.022 x 10²³) represents the number of atoms or molecules in one mole of a substance. However, the number of atoms in a given mass of a substance depends on the molar mass (mass per mole) of the substance, not the Avogadro's number.

The correct way to determine the number of atoms in a sample is to use the formula:

number of atoms = mass of the sample / molar mass

In this case, the molar mass of the substance is 30 g/mol, so the number of atoms in 150 g of the substance is:

number of atoms = 150 g / 30 g/mol = 5 mol

The correct answer is 5 moles of atoms, which is not equal to 5 times Avogadro's number. Therefore, the student's answer is incorrect.The student's error is that she is assuming that the number of atoms in a sample is directly proportional to the mass of the sample. Avogadro's number (6.022 x 10²³) represents the number of atoms or molecules in one mole of a substance. However, the number of atoms in a given mass of a substance depends on the molar mass (mass per mole) of the substance, not the Avogadro's number.

The correct way to determine the number of atoms in a sample is to use the formula:

number of atoms = mass of the sample / molar mass

In this case, the molar mass of the substance is 30 g/mol, so the number of atoms in 150 g of the substance is:

number of atoms = 150 g / 30 g/mol = 5 mol

The correct answer is 5 moles of atoms, which is not equal to 5 times Avogadro's number. Therefore, the student's answer is incorrect.

Which choice identifies the correct limiting reactant and correct reasoning? 2Mg + O2 2MgO 2.40 g Mg produces 3.98 g MgO. 10.0 g O2 produces 25.2 g MgO.

Answers

The limiting reactant in the question that we have here is magnesium since it has lower yeild. Option D

What is the limiting reactant?

If we are looking at the reactant, we are going to be looking at the reactant that is in the system that is going to lead us to obtain about the lowest amount of the products that is in the system.

Now we have in the case of the question that we have been asked that the kind of the reactant that would give the lowest amount of the product from the information in the question is magnesium.

Learn more about limiting reactant:https://brainly.com/question/14225536

#SPJ1

The atomic mass of copper (Cu) is 63.546 amu, the atomic mass of sulfur (S) is 32.065, and the atomic mass of oxygen (O) is 15.999 amu. Which molar mass is correct for copper sulfate (CuSO4)?(1 point)
Responses

446.440 g/mol
446.440 g/mol

159.607 g/mol
159.607 g/mol

225.802 g/mol
225.802 g/mol

111.610 g/mol

Answers

Copper sulphate (CuSO4) has a molar mass of 159.6 g/mol.

What uses does copper have?

Due to its ductility and excellent conductivity, copper is mostly used in electrical generators, home and auto wiring, as well as the wires in electronics like radios, TVs, computers, lighting, and motors.

A metal or a nonmetal, is copper?

Just on Periodic Table of Elements, copper is the 29th element. It is regarded as a moderately, nonferrous, malleable metals with countless uses in the fields of electrical and electronics, plumbing, construction projects & architecture, business, transportation, & consumer and health items.

To know more aboout copper visit:

https://brainly.com/question/13677872

#SPJ1

What is the temperature of a hot day in the desert? Select the better estimate. 47C 47F

Answers

Temperature. The desert reaches an average daily temperature of 38°C (just over 100°F). Desert nighttime temperatures typically drop below -3.9°C (approximately 25°F).

What is the desert's highest temperature?

The world's hottest air temperature was recorded at Death Valley: A scorching 56.7°C (134.1°F) was recorded on July 10, 1913, in the California desert's aptly called Furnace Creek location. Meanwhile, the average summer temperature frequently exceeds 45°C (113°F).

What is the desert's lowest temperature?

Desert surfaces lose nearly twice the same or more heat at night as humid ones do and receive slightly more than twice as much solar energy. Many average annual temperatures fall between 20 and 25 °C. The extreme maximum temperature is between 43.5 and 49 degrees Celsius. At times, the minimum temperature falls below -18 degrees Celsius.

To know more about temperature visit:

https://brainly.com/question/23411503

#SPJ1

When two large groups are positioned at a dihedral angle of 180° in a staggered conformation, the product confirmation will be called Anti-conformation.

Answers

The angle would need to be 180 degrees for the anti-conformation. Additional staggered conformation, known as the anti conformation, is created by adding another 60 rotations. In this structure, the two methyl groups are placed in opposition to one another.

What does dihedral mean and what does it do?

Dihedral, which is the upward angle of an aircraft's wings, makes the lower wing fly at a higher angle of attack than the higher wing, increasing lateral stability in a bank. In reality, it just means that you can fly more autonomously, especially during turbulence.

What in aviation is dihedral?

The angle between an aircraft's left and right wings is known as dihedral in aeronautics. The impact of sideslip on the aircraft's rolling is also referred to as "dihedral."

To know more about Dihedral visit:

https://brainly.com/question/21684710

#SPJ4

Using the solubility rules in your Reference Tables (page 6), which of the following reactions would occur?
A. CaBr2 + 2KNO3 --> Ca(NO3)2 + 2KBr
B. Ca(NO3)2 + 2HCl --> CaCl2 + 2HNO3
C. 3CuBr3 + 2AlCl3 --> 3CuCl2 + 2AlBr3
D. 3AgNO3 + K3PO4 --> Ag3PO4 + 3KNO3

Answers

Answer: Option b is correcr

Explanation: ption A: The relevant solubility rule is: Compounds with halides are soluble except when with silver, lead, or mercury. Therefore the products of this reaction are all soluble and the reaction will not occur as no precipitate is made.

Option B: In addition to the solubility rule stated in Question A, all nitrates are soluble. Therefore the products of this reaction are all soluble and the reaction will not occur as no precipitate is made.

Option C: Based on the solubility rules already mentioned, the products of this reaction are all soluble and the reaction will not occur as no precipitate is made.

Option D: Most compounds of phosphate are insoluble with exceptions being with ammonium and some Group 1A metals. Based on this, the silver phosphate

Ag will be insoluble and form a precipitate. Therefore this reaction will occur and Option D is the correct answer

To know more about reactions,

brainly.com/question/28260925

brainly.com/question/11033032

write Hypothesis (scientific reason):

"how does the temperature of substance affect on the concentration of sodium hydroxide solution?"​

Answers

With rising temperatures, sodium hydroxide's solubility declines when dissolved in another solvent.

what does mean by solubility?

Solubility refers to how easily a substance dissolves in a liquid to produce a solution (usually expressed as grams of solute per litre of solvent). One fluid's (liquid or gas) solubility in another can be complete (completely miscible; for example, methanol and water) or partial (oil and water only partly dissolve).

What three forms of solubility are there?

Solutes are divided into three categories: highly soluble, sparingly soluble, and insoluble based on the concentration at which they dissolve in a solvent.

To know more about solubility visit:

https://brainly.com/question/28170449

#SPJ1

what is the mean of 98,99, 100 90 , 98,100

Answers

The given question is 98, 99, 100 , 90, 98 , 100

Mean= [tex]\frac{Sum of observations}{Number of observations}[/tex]

In mathematics and statistics, the average is the average of a set of values. The mean can be calculated in a number of ways, including the simple arithmetic mean (adding the numbers and dividing the sum by the number of observations), the geometric mean, or the harmonic mean.

Sum of observations is 98+99+100+90+98+100

The summation is 585

The number of observations is 6.

= [tex]\frac{98+99+100+90+98+100}{6}[/tex]

= 97.5

So, the answer is 97.5

Describe what is an "impossible" fraction. (

Answers

Answer:

something that is impossible

Draw the Lewis structure for CH5N. How many lone pairs does it have?

Answers

Lewis structure for CH₅N has one lone pair.

A lone pair, also known as an unshared pair or a non-bonding pair, is an unshared pair of valence electrons that are not shared with another atom in a covalent bond in chemistry. Atoms' outermost electron shell contains lone pairs. The Lewis structure can be used to locate them. Therefore, if two electron pairs are coupled but are not utilized in chemical bonding, they are referred to as lone pairs. As a result, the amount of valence electrons surrounding an atom is equal to the sum of the electrons in lone pairs and those in bonds.

In the valence shell electron pair repulsion theory (VSEPR theory), which describes the morphologies of molecules, the idea of a lone pair is employed. They are also mentioned in relation to Lewis acids and bases in chemistry. Chemists do not, however, always classify non-bonding electron pairs as lone pairs. Examples include transition metals, where non-bonding pairs are believed to be stereochemically inactive and do not affect molecular shape. The idea of a lone pair is less clear in molecular orbital theory (completely delocalized canonical orbitals or localized in some way), as the relationship between an orbital and the elements of a Lewis structure is sometimes not clear-cut. However, orbitals that are largely nonbonding or that are occupied are typically classified as lone pairs.

We can learn more about lewis structure here:

https://brainly.com/question/20300458#

#SPJ4

the number of objects in a mole of something is dictated by which constant? One mole of a substance is equal to 6.022 xd7 10xb3 units of that substance (such as atoms, molecules, or ions). The number 6.022 xd7 10xb3 is known as Avogadro’s number or Avogadro’s constant. The concept of the mole can be used to convert between mass and number of particles.. Created by Sal Khan.
a. true
b. false

Answers

The given statement is true since the number of objects in a mole is dictated by a quantity called Avogadro's number.

Avogadro's number is quite an important quantity in chemistry as well as other branches of science. It tells us how many atoms are there in one gram atom of a compound, how many molecules are there in one gram molecule of a compound, and how many ions are there in one gram of ions in a substance.

It was discovered by the Italian scientist Amedeo Avogadro and thus, named after him. Its value is = 6 . 022 × 10²³ mol⁺¹ and its SI unit are the reciprocal of a mol (mol⁺¹). Hence, the given statement is indeed true.

Learn more about Moles on

https://brainly.com/question/26416088?referrer=searchResults

#SPJ4

write 5 well constructed sentences about a 3D atom model. Be sure to include what the different materials repesent. PLEASE HELP ME leave a picture of a 3D atom model

Answers

A popular science project and craft used to better understand how particular atoms function is the creation of 3D atom models. When teaching about atoms, a 3D atom model can be used to demonstrate concepts in a classroom or to provide explanations.

What is the 3D concept about?

The 3D concept of the atom and how the protons and neutrons in the nucleus relate geometrically and in terms of size to the electrons spaced at relatively great distances from the nucleus can be introduced to students from elementary school through high school through an atom model project.

It should be noted that in order to make the 3D concept for the model, attach eight small craft balls to the medium circle, eight to the large circle, eight to the extra-large circle, and finally two to the small circle with glue. These will resemble each and every atom's electron. To help the model hang, attach a piece of string to the outer circle.

Learn more about atom on:

https://brainly.com/question/17545314

#SPJ1

Analysis of a 10. 150 g sample of a compound known to contain only phosphorus and oxygen indicates a phosphorus content 0f 4. 433 g. What is the empirical formula of this compound?.

Answers

The empirical formula of the 10.150 g sample compound which is known to only contain phosphorus and oxygen shows that the phosphorus content 0f 4.433 g is P₂O₅.

An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms.

An unidentified substance weighs 10.15 g.

Phosphorus weighs 4.433 g in total.

Hence, 10.15 - 4.433 = 5.717

The oxygen mass will be 5.717g.

Determine the moles.

Number of moles of oxygen = mass / molar mass

= 5.717 / 16

= 0.357

Number of moles of phosphorus = mass / molar mass

= 4.433 / 31

= 0.143

Divide the moles by the minimum number of mole:

⇒ 0.357 / 0.143

= 2.496

⇒ 0.143 / 0.143

= 1

Divide the moles by two:

⇒ 2.496 x 2 = 5

=1 x 2 = 2

So, the empirical formula is P₂O₅.

Learn more about empirical formula here: https://brainly.com/question/14044066

#SPJ4

Which of the following statements about groundwater are TRUE? Select ALL that apply. (Hint: 4 of the 6 statements are correct!) The water table generally maintains a relatively flat shape beneath the ground surface. Owing to pressure differences, it is possible for groundwater to flow uphill. The water table will be deeper below the surface in arid regions as compared to humid regions. A confined aquifer is an underground source of water that is prevented from reaching Earth's surface by an impermeable layer. The surface of the water table may be visible above ground as the surface of a river or lake. If an aquifer has a high porosity, then it will also have a high permeability

Answers

When opposed to humid areas,  ground water will be deeper in arid areas. underground water source termed an confined aquifer is one in which an impermeable layer blocks the water's path to the surface the planet.

What places can one find constrained aquifers?

An aquifer that has restricting beds enclosing it on both the top and bottom is said to be confined. At substantial depths below the surface of the ground, confined aquifers typically exist.

What source of water do restricted aquifers use?

Aquifers that are enclosed and filled with water are those that are found beneath the surface of the land. The aquifer is under pressure because of the impermeable layers that are both before and below it. As a result, when a well drills into the aquifer, water will rise over the top of the impermeable layers.

To know more about confined aquifers visit:

https://brainly.com/question/14916917

#SPJ4

Potassium nitrate reacts with carbonic acid to produce potassium carbonate and nitric acid. A chemist adds 15.15g of potassium nitrate to 0.228 mol of carbonic acid, and gets 8.45g potassium carbonate.
a. Write a balanced chemical equation, including all the states of matter.
b. Determine the limiting reactant and the amount of potassium carbonate (in
grams) produced.
c. What is the theoretical yield of potassium carbonate?
d. Determine the percent yield of potassium carbonate in this reaction.

Answers

K2CO3 + 2HNO3 = 2KNO3 + H2CO3. The necessary quantity of n (KNO3)    is equal to 2 x n (H2CO3), or 2 x 0.228, or 0.456 mol. This exceeds the amount that is accessible (0.15 mol). KNO3 is the least reactive as a result.

What does the word reactive mean?

reacting to circumstances or events rather than taking proactive measures to influence or prevent them: Unfortunately, rather than taking a proactive approach to the issue of auto theft, the police have taken a reactive one. They only seem to be capable of responding adversely to proposals made by other individuals.

Which of the following describes a reactive chemical?

Explosives, peroxides, water-reactive substances, and pyrophorics are a few examples of extremely reactive chemicals.

To know more about reactive visit:

https://brainly.com/question/1598581

#SPJ1

What do you call the variable exerted by gas molecules in a specific area?

Answers

The variable exerted by gas molecules in a specific area is called pressure.

THE PRESSURE

Pressure is a measure of the force exerted by gas molecules on the walls of the container they are in. It is typically measured in units of Pascals (Pa) or pounds per square inch (psi). The pressure of a gas is determined by the number of molecules present in a given volume, as well as the velocity of those molecules.

At higher temperatures, gas molecules move faster and therefore exert a greater force on the walls of the container, resulting in higher pressure. At lower temperatures, gas molecules move more slowly and exert a lesser force, resulting in lower pressure. Additionally, increasing the number of molecules in a given volume will also increase the pressure.

Learn more about the pressure here:

https://brainly.com/question/2617187

#SPJ4

A chemical reaction is run in which 796 Joules of heat are generated and 235 Joules of work are done on the system. Calculate the change in the internal energy of the chemical system. Joules

Answers

The internal energy change of the reaction is -561J, and w for the species is +235J according to the provided statement.

What does the term "reaction" in chemistry mean?

In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional compounds are known as products. Chemical elements or chemical compounds make up substances.

Using the basic principle of thermodynamics,

ΔE = q + w

Q is -ve when heat is produced.

Thus,

q = - 495 J

ΔE = -31J

These variables are substituted in the equation above to yield,

- 31 J = - 495 J + w

or, w = +464 J

Using the basic principle of thermodynamics,

ΔE = q + w

Q is -ve when heat is produced.

Thus,

q = -796 J

The system has been worked on, thus w is positive.

Thus,

w = +235 J

These variables are substituted in the equation above to yield,

ΔE = + 235 J - 796 J

ΔE = -561 J

To know more about Reaction visit:

brainly.com/question/25769000

#SPJ4

The complete question is-

A chemical reaction is run in which 495 Joules of heat are generated and the internal energy changes by -31 Joules.

Calculate 'w' for the system in (Joules)

A chemical reaction is run in which 796 Joules of heat are generated and 235 Joules of work are done on the system.

Calculate the change in the internal energy of the chemical system.

ΔE in Joules

1. Examine the IR spectrum of cis-norbornene-5,6-endo-dicarboxylic anhydride, (Fig.48.8, pp. 630): what do the signals at 1750 cm-1 and 1838 cm-1 indicate?

2. Explain the following questions regarding the possible contamination of the final isolated product with dicyclopentadiene (the cyclopentadiene dimer).

a. Since "cracked" cyclopentadiene can spontaneously dimerize back to dicyclopentadiene, could the dimer be formed as an unwanted "by-product" during the experiment?

b. How does the experimental procedure minimize contamination of the final isolated (desired) product with this (undesired) "by-product"?

Answers

1) anhydride normal peaks (1760 and 1810 cm-1) there are two peaks for anhydrides at the above freq. our peaks are at 1759 cm-1 and one at 1838 cm-1 (cyclic anhydride 5 membered ring again increases freq. upto 30 cm-1).

So, the peak at 1838 cm-1. electronegetive oxygen atom (inductive effect) between two carbonyl group increases the freq, while resonanse lowers the freq.

2) While cracking the dimer it will give us monomer which then reacts with maleic anhydride to give Diels-Alder product, it does not give any unwanted product at higher temperature. if cracked monomer reacted at low temp. or it does not reacted immediately with maleic anhydride then unwanted product will be obtained

3) breaking the dimer at high temperature and it is to be reacted immediately can isolate the pure prodict.

To know more about anhydride here

https://brainly.com/question/28148464

#SPJ4

How is the periodic table divided? (Where do we find metals, nonmetals and metalloids?)

Answers

Answer:

Explanation: you have to divide the simbles

what are the answers?

Answers

                                                                               ··                               ··  

The balanced equation was found to be Na· + ·Cl : ---------> Na + (: cl : )-

                                                                               ..                               ..          

Define ionic bond dot diagram ?

Group 8 elements, generally known as noble gases, are noted for their inertness. They hardly never react with other elements, such as water, oxygen, or metals. This is due to the fact that they all have a complete outer shell of electrons. This is the most stable electron configuration possible for an atom.

Other elements, on the other hand, do not have this stable electron configuration. Instead, in order to obtain that ideal arrangement, they must acquire, lose, or share electrons. Ionic bonding is one method for doing this.

the answer for the ionic bond dot diagram for the Nacl was found to be.

           ··                              ··

Na· + ·Cl : ---------> Na + (: cl : )-

           ..                              ..

To learn more about ionic bond follow the given link: https://brainly.com/question/13526463

#SPJ1

5. A difference in air pressure creates what?

Answers

Wind results from a horizontal difference in air pressure and since the sun heats different parts of the Earth differently, causing pressure differences, the Sun is the driving force for most winds. 1.

What is meant by pressure?

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure (symbol: p or P).The pressure relative to the surrounding air is referred to as gauge pressure (sometimes spelled gauge pressure).Pressure is expressed using a variety of units. Some of these come from dividing a unit of force by a unit of area; the traditional unit of pressure in the imperial and U.S. customary systems is the pound-force per square inch (psi, symbol lbf/in2), whereas the SI unit of pressure, the pascal (Pa), is one newton per square metre (N/m2).

To learn more about pressure refer to

https://brainly.com/question/25736513

#SPJ1

Please help Chemistry
9 mol P4010 reacts with 51 mol
H2O according to the equation below:
P4010+6H2O

4H3PO4
How many moles of H3PO4 form
from 51 mol H2O?
[ ? ] mol H3PO4
Round your answer to the ones place.

Answers

If 51 moles of water reacts in the above chemical reaction, then 34 moles of phosphoric acid will be produced.

How to calculate number of moles?

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, phosphorus oxide reacts with water to produce phosphoric acid as follows:

P₄0₁₀ + 6H₂O → 4H₃PO₄

Based on the above equation, 6 moles of water produced 4 moles of phosphoric acid.

This means that 51 moles of water will produce 51 × 4/6 = 34 moles of phosphoric acid.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Which type of soil has better water holding capacity and why?

Answers

A soil can hold more water if its surface area is larger. To put it another way, a fine soil, which is defined as soil with only a high proportion of clay and sediment particles, has a better capacity to hold water.

Explain what dirt is.

The material that covers the surface of the ground, known as soil, is created as a result of the weathering of rock. Its principal constituents include mineral atoms, organic substances, air, water, and living things, all of which interplay slowly yet continuously.

Does dirt include soil?

Although a lot of us could confuse the terms dirt and soil, they are distinct from one another thing. When it comes to nutrients or bacteria, dirt is frequently composed of clay, sands, silt, and pebbles.

To know more about Soil visit:

https://brainly.com/question/23813511

#SPJ4

Other Questions
A public address system puts out 5.92 W of power. What will be the intensity at a distance that results in a surface area of 9.47 m?? 0 355 W/m2 0 56.1 W/m2 O 160 W/m2 O 0.625 W/m2 Step 4: Compute the pH of the Solutions Selected Dividend Transactions, Stock SplitSelected transactions completed by Canyon Ferry Boating Corporation during the current fiscal year are as follows:Journalize the transactions.If no entry is required, type "No entry required" and leave the amount boxes blank. For a compound transaction, if an amount box does not require an entry, leave it blank.Jan. 8. Split the common stock 2 for 1 and reduced the par from $80 to $40 per share. After the split, there were 150,000 common shares outstanding.Apr. 30. Declared semiannual dividends of $0.75 on 18,000 shares of preferred stock and $0.28 on the common stock payable on July 1.July 1. Paid the cash dividends.Oct. 31. Declared semiannual dividends of $0.75 on the preferred stock and $0.14 on the common stock (before the stock dividend). In addition, a 5% common stock dividend was declared on the common stock outstanding. The fair market value of the common stock is estimated at $52Dec. 31. Paid the cash dividends and issued the certificates for the common stock dividend. Consider a systematic binary linear block code whose parity check equations are P1 = m + m2 + m4 P2 = m + mz+m4 P3 = m + m2 + mz P4 = m2 + mz+m4 where addition is over the binary field, mi, i = 1,...4, are message bits and Pi, i = 1, ...4, are parity bits. a) Find the generator matrix and parity check matrix b) Find codeword length n and message length k, and code rater c) Write down all possible codewords d) Find the minimum Hamming distance e) Find the error detection and error correction capabilities of this code. The heat of combustion of CH4 is 890.4 kJ/mol and the heat capacity of H2O is 75.2 J/molK. Part A Find the volume of methane measured at 298 K and 1.45 atm required to convert 1.50 L of water at 298 K to water vapor at 373 K. A forest canopy has an interception capacity of 5 mm (0.2 in). Estimate the annual fraction of rainfall lost to interception storage based on the daily precipitation data (inches) given below. Assume that all intercepted water evaporates during each 24-hr period. Use an "if' statement in Excel to solve. The area A (r) (in square meters) of a circular algae colony with radius r meters is given by A (r)=ar.13The radius M (t) (in meters) after t minutes is given by M (t)=Write a formula for the area Z (t) (in square meters) of the algae colony after t minutes. This forum is an opportunity for students to discuss topics related to Essays and Reflections IV.Rather than tackling an entire essay topic, I suggest you take on something more specific that would fit with the topic. For example, if you are writing about "The Americas", you could discuss "Eastern Woodlands Peoples" as something that could be part of the essay. If you start a topic, please give it a title such as "Eastern Woodlands (The Americas)" or "Mongol Contributions (Integration)" or "India and China (Comparative Cultures)".Please only share one or two paragraphs, in each post. The idea is to start a discussion on the topic, or continue a discussion someone else started. Please consider how your post will encourage others to share.Whether your post is the introducing a topic, or responding to another student, please mention specific chapters where you picked up the information you are discussing. If you can mention page numbers, that could also be helpful. Also, feel free to share pictures that could be helpful when discussing the topics. Connections to our "history habits of mind" could also be helpful. What important Federalist idea is expressed in this excerpt from the Federalist Papers? 2. Some bags of Joe Coffee coffee beans include a collectable card of one of the cute members from BTS.inside the bag. Joe Coffe Company claims that a collectable card can be found in 20 percent of the coffeebags. However, based on their experiences making and drinking coffee at home, Mr. Brenes and his coffeeclub believes that the proportion of coffee bags with collectable cards is less than 0.2. The coffee clubpurchased 65 bags of Joe Coffee coffee beans to investigate the company's claim. The coffee club found atotal of 11 collectable cards in the 65 coffee bags.Suppose it is reasonable to assume that the 65 coffee bags purchased by Mr. Brenes and his coffee club area random sample of all Joe Coffee bags of coffee beans. Based on this sample, is there support for the coffeeclub's belief that the proportion of bags with collectable cards is less than 0.2 ? Provide statistical evidence-to support your answer. WHICH STATEMENT EXPLAINS HOW THE PRODUCT OF 1/6 AND 1/2 RELATS TO 1/6 ______ is a learned response to food that is tied to an emotional or psychological craving, often unrelated to nutritional need. the oh concentration in an aqueous solution at 25 c is 6.1 10. what is [h]? Suppose the economy is initially in equilibrium as depicted on the graph to the right. Note: "E= Este. exchange DD1 The government implements a permanent expansionary monetary policy, which corresponds to an increase in the US (domestic) money supply. Using the line drawing fool, draw on the same graph a new AA line or new DD line. Properly label your line. Carefully follow the instructions above and only draw the required object As a result of permanent expansionary monetary policy in the short run output will rise and the exchange rate will rise In the long run, the economy will slowly adjust to a new equilibrium since the change was permanent. In this new equilibrium, compared to the initial equilibrium, output will be higher than before and the exchange rate will be higher Outour Click the graph, choose a tool in the palette and follow the instructions to create your graph ______ relationships are characterized by significant emotional closeness and may or may not be romantic. A. Social B. Intimate C. Friendly D. Familial. (1) gas-turbine-engine fuel systems are very susceptible to the formation of ice in the fuel filters. (2) a fuel heater operates as a heat exchanger to warm the fuel. regarding the above statements, USA Oil Corporation signs an instrument that states it is being executed "in accord with a contract for the purchase of 4,000 barrels of oil dated May 1." This instrument isa. negotiable.b. nonnegotiable, because information about the sale must be obtained from another source.c. nonnegotiable, because it states an express condition to payment.d. nonnegotiable, because the terms of the sale are not clear. A form of multinational corporation (MNC) that exposes the firm to the least amount of political risk, and is therefore the preferred arrangement by both businesses and foreign governments, is called A. An exporter B. A licensing agreement C. A joint venture D. A fully owned foreign subsidiary the set of rules that determines whether or not credit should be extended is known as: credit analysis. credit policy. multiple discriminate analysis. the terms of trade credit. what physical address corresponds to the virtual address 0x00. write the answer in exactly 2 hex digits such as ab or 0a. if the address causes a page fault, write fault. question 31 options: