For a mammal, the average time it takes for blood to circulation the body and return to the heart is given by the function C(m)=18m0.23 C ( m ) = 18 m 0.23 , where C C is the circulation time in seconds and m m is the mass of the mammal in kilograms. Find the circulation time for a mammal that weighs 90 kilograms. Then find a formula for C′(m) C ′ ( m ) and evaluate C′(90) C ′ ( 90 ) .
the rate of change in is C'(m)=
C'(90)

The magnitude of the acceleration of each block is given by the absolute value of a

In a system with a massless string and pulley, the forces acting on each block must be taken into account in order to calculate the amount of each block's acceleration.

Assume that the mass of block 1 is m1, the mass of block 2 is m2, and the string's tension is T.

Block 1 is being pulled up and down by the tension in the string (T) and its weight (m1g), respectively.

Block 2 is being pulled up and down by the tension in the string (T) and its weight (m2g), respectively.

The tension in the string remains constant throughout due to the masslessness of the string and the pulley as well as the absence of friction, which causes the blocks to accelerate in opposing directions at the same rate (a).

As a result, we may express the two blocks' motion equations as follows:

m1g - T = m1a for block 1.

T - m2g = m2a for block 2.

These equations for T and a can be resolved:

T = (m1 + m2)g / 2

m1 + m2 / (m2 - m1)g = a

The absolute value of a, which is as follows, determines the extent of each block's acceleration:

A is equal to (m1 + m2)g / (m2 - m1)g.

This formula indicates that the acceleration of each block is a function of both the total and difference of their masses.

A negative acceleration means that block 1 is travelling downhill and block 2 is moving upward if m1 is bigger than m2.

A positive acceleration means that block 1 is going upward and block 2 is falling downward if m2 is larger than m1.

For such more questions on Acceleration

https://brainly.com/question/460763

#SPJ4

By supplying the distance travelled and the quantity of gasoline spent as inputs, Shubham may write a Python function to get the current mileage of his automobile. The statement is true.

Shubham can create a function in Python to calculate the current mileage of his car by passing the distance traveled and the amount of petrol consumed as parameters. He can define the function to take two arguments: distance and petrol, and then calculate the mileage by dividing the distance by petrol.

If the function is written correctly, it will return the current mileage of his car in km/l. By passing the appropriate values to this function, he can easily calculate the mileage of his car at any time, which can help him keep track of his car's fuel efficiency and plan his journeys accordingly.

To know more about the mileage, here

brainly.com/question/13860566

#SPJ4

The given statement about “when you are standing up in a subway train, and the train suddenly stops, your body continues to go forward.” Is true because due to inertia of motion.

The concept of inertia describes the tendency of an item to keep moving in the same direction and at the same speed until acted upon by a force that alters either of those properties. When properly understood, this word is a shorthand for "the principle of inertia," which Newton referred to in his first law of motion.

Another meaning of the word "inertia" is the resistance of any physical item to a change in the velocity at which it is moving. This includes alterations to the object's speed as well as the direction in which it is moving. When there are no external forces acting against an object, it has a propensity to continue travelling in a straight path at a constant speed. This is a facet of the property known as linear momentum.

To learn more about inertia, click here:

https://brainly.com/question/3268780

#SPJ4

According to the statement, on the assumption of requesting help from a statistical software consultant, the given case that P(A) + P(B) = 1 is not true, since A and B are not mutually exclusive events.

It is possible for the next request to be related to both SPSS and SAS, in which case it would be included in both A and B.  Therefore, we cannot simply add their probabilities to get the total probability of either event.

B. P(A') represents the probability that the next request is NOT related to the SPSS package. We can find this by subtracting P(A) from 1, since the sum of the probabilities of an event and its complement is always equal to 1:

P(A') = 1 - P(A) = 1 - 0.30 = 0.70

Therefore, the probability that the next request is NOT related to SPSS is 0.70.

C. P(A ∪ B) represents the probability that the next request is related to either SPSS or SAS or both. We can find this by using the formula:

P(A ∪ B) = P(A) + P(B) - P(A ∩ B)

Where P(A ∩ B) represents the probability that the next request is related to both SPSS and SAS. Since we don't have information about the probability of this intersection, we cannot calculate P(A ∪ B) exactly. However, we know that the probability of the intersection must be between 0 and the minimum of P(A) and P(B), which in this case is 0.30. Therefore, we can say:

0 ≤ P(A ∩ B) ≤ 0.30

and use this range to get a lower and upper bound for P(A ∪ B):

P(A ∪ B) = P(A) + P(B) - P(A ∩ B) ≤ 0.30 + 0.50 - 0 = 0.80

P(A ∪ B) = P(A) + P(B) - P(A ∩ B) ≥ 0.30 + 0.50 - 0.30 = 0.50

Therefore, the probability that the next request is related to either SPSS or SAS (or both) is between 0.50 and 0.80.

D. P(A' ∩ B') represents the probability that the next request is NOT related to either SPSS or SAS. We can find this using the formula:

P(A' ∩ B') = P((A ∪ B)')

Where (A ∪ B)' represents the complement of the event that the next request is related to either SPSS or SAS (or both). We can find (A ∪ B)' using the formula:

(A ∪ B)' = A' ∩ B'

Which represents the event that the next request is NOT related to either SPSS or SAS. Therefore:

P(A' ∩ B') = P((A ∪ B)') = 1 - P(A ∪ B)

From part c, we know that 0.50 ≤ P(A ∪ B) ≤ 0.80, so:

P(A' ∩ B') = 1 - P(A ∪ B) ≤ 1 - 0.50 = 0.50

P(A' ∩ B') = 1 - P(A ∪ B) ≥ 1 - 0.80 = 0.20

Therefore, the probability that the next request is NOT related to either SPSS or SAS is between 0.20 and 0.50.

Complete question:

Let A denote the event that the next request for assistance from a statistical software consultant relates to the SPSS package, and let B be the event that the next request is for help with SAS. Suppose that P(A) =. 30 and P(B) = .50.

a. Why is it not the case that P(A) + (B) = 1?

b. Calculate P(A ′).

c. Calculate P(A ∪B).

d. Calculate P(A′ ∩B′).

Learn more about statistical software consultant:

https://brainly.com/question/14701942

#SPJ4

Answer:  The speedometer does not give the direction of the vehicle. Thus, this device can measure only the speed of a vehicle, not its velocity.

Explanation: A speedometer is a device that helps to estimate and visualize a vehicle's instantaneous speed, which has only magnitude.

The distance from the point charge is 0.425 m using relationship of electric potential and field.

Using relationship between electric field and electric potential, electric field magnitude becomes negative gradient of the electric potential.

[tex]|E| = -dV/dr[/tex]

where |E| : electric field magnitude, V: electric potential, and r: point charge distance

We are given that[tex]|E| = 17.9 V/m[/tex]and V = 7.6 V. Put values:

[tex]17.9 V/m = -dV/dr = -d(7.6 V)/dr[/tex]

Solving for d, we get:

[tex]d = -7.6 V / (17.9 V/m) = -0.425 m[/tex]

Since distance cannot be negative, we take the absolute value to get:

d = 0.425 m

Therefore, the distance from the point charge is 0.425 m.

Learn more about distance here:

https://brainly.com/question/28296599

#SPJ4

half I think that's just a guess though

Answer:

Potential energy has several advantages and disadvantages, which are as follows:

Advantages:

1. High Energy Density: Potential energy has a high energy density, meaning that a small amount of mass can store a large amount of energy. This makes it ideal for applications where energy needs to be stored in a compact space, such as batteries or hydroelectric dams.

2. Clean Energy: Potential energy sources, such as hydro, wind, and solar power, are clean and renewable sources of energy. They do not produce harmful pollutants or contribute to climate change like fossil fuels do.

3. Stable and Predictable: Unlike some other forms of energy, such as wind and solar, potential energy sources are generally stable and predictable. For example, hydroelectric dams produce a steady and consistent supply of energy.

4. Cost Effective: Once built, potential energy sources are often low-cost sources of energy. For example, the cost of producing electricity from hydroelectric dams is typically lower than from fossil fuels.

Disadvantages:

1. Initial Investment Costs: The main disadvantage of potential energy is the high initial investment required to build the infrastructure needed to harness it. For example, building a hydroelectric dam or a wind farm is expensive and takes time.

2. Limited Availability: Potential energy sources are limited by the availability of resources. For example, hydroelectric power can only be generated where there is a suitable source of running water, such as a river or stream.

3. Environmental Impacts: Although they are clean sources of energy, potential energy sources can have negative environmental impacts. For example, the construction of large hydroelectric dams can displace communities and disrupt ecosystems, while wind turbines can be a source of noise pollution and pose a risk to bird and bat populations.

4. Technical Challenges: Harnessing potential energy can also be technically challenging. For example, the efficient and effective storage of energy from wind and solar sources is still a challenge that engineers and scientists are working to overcome.

Answer:

Fc=mv2/r v=√(Fcr/m) v=√[(3.6 N)(0.38 m)/(0.0012kg)] v=33.76388603 m/s v=38 m/s

Explanation:

The possible values for the charges is Option B, Q1 = 1.0 x 10⁻⁷ C  and    Q2 = -1.6 x 10 ⁻¹⁴ C

The tendency of a body to change or alter its state as a result of an external cause is referred to as force. The object can change its size, shape, and direction when force is applied. A few examples include kicking a ball, yanking and pulling on the door, and mixing dough.

Force = 16N

d = 3.0 x 10 ⁻³m

F = kQ1Q2/d²

16 = 9x10⁹/(3x10⁻³)² Q1Q2

Q1.Q2 = 1.6x10⁻¹⁴

Now that Q1.Q2 = 1.6x10⁻¹⁴

and force is attractive the charges must be of opposite sign

Therefore, Option B is correct

Q1 = 1.0 x 10⁻⁷ C  and    Q2 = -1.6 x 10 ⁻¹⁴ C

A fundamental force, also known as a fundamental interaction, is any of the four fundamental forces in physics—gravitational, electromagnetic, powerful, and weak—that govern how things or particles interact as well as how some particles decay. All recognised natural forces originate from these basic forces.

Learn more about Charges:

https://brainly.com/question/30320735

#SPJ4

(1) The potential difference between the two spheres will cause charges to flow from Sphere 1 to Sphere 2 until their potentials are equal.(2)  Since the total charge is conserved, the total charge on both spheres after the switch is closed will be equal to the charge on Sphere 1 before the switch is closed.

a) The potential difference between the two spheres will cause charges to flow from Sphere 1 to Sphere 2 until their potentials are equal. Since Sphere 1 has a positive charge, electrons will flow from Sphere 2 to Sphere 1 until their potentials are equal. This means that Sphere 1 will end up with a lower potential than its initial potential and Sphere 2 will end up with a higher potential than its initial potential. Therefore, Vi is smaller than V2.

b) Since the total charge is conserved, the total charge on both spheres after the switch is closed will be equal to the charge on Sphere 1 before the switch is closed. Therefore, the final charge on Sphere 2, Q2, will be equal to the initial charge on Sphere 1. Hence, Qi is equal to Q2.

c) The electric field strength at the surface of a charged conductor is proportional to the surface charge density. Since Sphere 1 has a larger radius than Sphere 2, it has a larger surface area and therefore a lower surface charge density. This means that E1 will be smaller than E2. Additionally, as charges move from Sphere 1 to Sphere 2, the surface charge density on Sphere 1 decreases, leading to a decrease in E1. Therefore, E1 will be smaller than E2 after the switch is closed.

Learn more about potential difference here:

https://brainly.com/question/12198573

#SPJ4

The difference between standard and non-standard Gibbs free energy is significant in the cell because it provides information about the conditions under which a reaction will occur spontaneously.

Standard Gibbs free energy change (ΔG°) is the change in Gibbs free energy that occurs when reactants are converted to products at standard conditions (25°C, 1 atm pressure, and 1 M concentration). Non-standard Gibbs free energy change (ΔG) considers the actual concentrations and conditions of the reactants and products.

The actual concentrations of reactants and products may be different from the standard conditions due to changes in temperature, pressure, or concentration. The non-standard Gibbs free energy change, which takes these changes into account, is a more accurate representation of the energetics of the reaction.

To know more about the Gibbs free energy, here

brainly.com/question/13795204

#SPJ4

The reading on a scale could be less after leaving the top floor and heading downward due to the effect of gravity on the body.

Gravity is a fundamental force of nature that exists between all objects that have mass or energy. It is the force that pulls two objects towards each other, and it is what keeps objects like planets, stars, and galaxies in their orbits.

The force of gravity is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. This means that the greater the mass of the objects and the closer they are to each other, the greater the force of gravity between them.

Gravity is responsible for many phenomena that we observe in our daily lives, such as keeping us and other objects on the surface of the Earth, causing tides in the ocean, and making objects fall to the ground when we drop them. It is also a key concept in the fields of astronomy and astrophysics, as it is what allows us to understand the motion and behavior of celestial objects in the universe.

Hence, The reading on a scale could be less after leaving the top floor and heading downward due to the effect of gravity on the body.

To know more about gravity visit :

https://brainly.com/question/9934704

#SPJ4

The charge on each identical bead is calculated to be q = √[4πε/√3× (R² m g)].

The mass of the two identical beads is given as m.

The charge on each bead is q.

The radius of the hemispherical bowl is R.

The beads are said to be in equilibrium.

For the charges to balance at a point, the force of electric repulsion along the tangent should balance the force of gravitation along the tangent.

1/4πε q²/R² cos 30° = m g cos 60°

1/4πε q²/R² (√3/2) = m g (1/2)

√3/4πε q²/R² = m g

q² = (4πε)/√3 × (R² m g)

q = √[4πε/√3× (R² m g)]

Thus, the charge on each bead is calculated to be √[4πε/√3× (R² m g)].

To know more about charge:

https://brainly.com/question/14493715

#SPJ4

The correct Answer is :

The velocity components have the same magnitudes at both points, but the directions of the y components are reversed."

We will see which of the options are wrong and why and provide justification for the correct answer in the end.

A) The velocity components are non-zero at A and are zero m/s at D.

This is wrong and there are two ways to see this. The vertical component of velocity is zero only at the topmost point of the motion, and the horizontal component of velocity never becomes zero since the horizontal motion is a constant velocity motion.

B) The velocity components are the same in magnitude and direction at both points.

This is not possible. Although the horizontal component of velocity stays constant throughout the motion, the vertical component of velocity first decreases then becomes zero at the highest point and starts to fall down, reversing the direction. So, the vertical component of velocity cannot be the same at both points.

D) The velocity components have the same magnitudes at both points, but their directions are reversed.

This is also wrong. As stated above, the horizontal component of velocity stays the same throughout the motion. So, although the direction of the vertical component of velocity changes, the direction of the horizontal component does not.

E) The velocity components have the same magnitudes at both points, but the directions of the x components are reversed.

This is also wrong due to the reasons mentioned for point D being incorrect.

The correct answer is of course:

C) The velocity components have the same magnitudes at both points, but the directions of the y components are reversed."

The justification for this is as follows. When the ball is thrown upwards, it has an initial velocity denoted as [tex]v_{x}i + v_{yi}j[/tex] The initial velocity in the horizontal direction is [tex]v_{x}[/tex] and it stays constant throughout the motion. The initial velocity in the vertical direction is [tex]v_{yi}[/tex] Now, let us say that it travels a distance [tex]s_{y}[/tex] in the vertical direction before its velocity becomes zero due to the constant gravitational acceleration acting in the downwards direction, that is, a= -g

We use the kinematic equation

vf = vi+at

to determine the time for this motion. So:

0 = vyi−gt

⟹t = vyig.

We substitute this into the kinematic equation

sy=vit+12at2.

So:

sy=vyi×vyig−12×g×v2yig2=v2yi2g

Now, in the downward motion, the ball with travel the same distance. We want to determine the final velocity of the ball, given that the initial velocity is 0. So:

   sy = −v2yi2g

        =0×t+12×(−g)t2

⟹ t=vyig

The minus sign on the displacement is due to the fact that it takes place in the negative-y direction.

To find the velocity at point D we now use the equation

vyf = vyi+at

⟹ vyf = 0−g×vyig

⇒ −vyi

We have proved that the y-component of the velocity reverses while the x-component stays constant.

Learn more about velocity :

brainly.com/question/17127206

#SPJ4

This statement refers to the value of the function f(t) at t = 6, which represents the amount of rainfall that has fallen since midnight up to 6 AM.

To know more about time visit:

https://brainly.com/question/29096913

#SPJ1

The angular momentum of the system is  225,540 kg [tex]m^{2} /s[/tex] and the distance between the modules that would give an effective acceleration of gravity equal to g is 24.8 m.

(a) The angular momentum of the system is given by L = Iω.

The moment of inertia of an equilateral triangle of mass M and side length a is I = (1/6)M[tex]a^{2}[/tex]

The mass of each capsule is 100 people × 75.0 kg/person = 7,500 kg.

Therefore, the total mass of the system is M = 3 × 7,500 kg = 22,500 kg.

The radius of the circle is half the side length of the equilateral triangle, so r = 41.0 m.

Therefore, the angular velocity of rotation is given by ω = (g/2)/r = 0.120 rad/s.

Using these values, the angular momentum of the system is L = (1/6)M[tex]a^{2}[/tex]ω = (1/6) × 22,500 kg × (82.0 [tex]m^{2}[/tex]) × 0.120 rad/s = 225,540 kg[tex]m^{2} /s[/tex]

(b) If the modules are pulled closer together, the moment of inertia of the system will decrease, because the mass of the system will be closer to the axis of rotation. According to the conservation of angular momentum, if the moment of inertia decreases, the angular velocity of rotation must increase in order to keep the angular momentum constant. Therefore, pulling the modules closer together would increase the rotational rate of the space station.

(c) The effective acceleration of gravity is given by g_eff = (g/2) + ([tex]v^{2}[/tex]/r), where v is the linear velocity of the space station. At the current rotational rate, the linear velocity of the space station is v = rω = 41.0 m × 0.120 rad/s = 4.92 m/s.

g.eff = (g/2) + ([tex]v^{2}[/tex]/r) = g

([tex]v^{2}[/tex]/r) = (g/2)

r = (2[tex]v^{2}[/tex])/g

Substituting the values for v and g, we get:

r = (2 × [tex]4.92m/s ^{2}[/tex])/9.81 [tex]m/s^{2}[/tex] = 24.8 m

Therefore, the distance between the modules that would give an effective acceleration of gravity equal to g is 24.8 m.

Learn more about angular momentum here:

https://brainly.com/question/15898158

#SPJ4

If the half-life of an isotope is found to be 6 days, then the isotope whose initial weight is 95 and the final weight is 5.9. It would take approximately 24 days.

Isotope may be defined as the type of atom in which the number of neutrons differs and the number of protons is the same. They are atoms of the same element, having the same atomic number but different mass numbers.

According to the context of this question,

The initial weight of an isotope = 95

The final weight of an isotope = 5.9

The half-life = 6 days

After 6 days, the weight of 95 reduced to 47.5.

After 6 days, the weight of 47.5 was reduced to 23.75.

After 6 days, the weight of 23.75 reduced to 11.87

After 6 days, the weight of 11.87 was reduced to 5.93.

Therefore, if the half-life of an isotope is found to be 6 days, then the isotope whose initial weight is 95 and the final weight is 5.9. It would take approximately 24 days.

To learn more about Isotopes, refer to the link:

https://brainly.com/question/13604636

#SPJ9

Your question is incomplete, but most probably your full question is as follows:

An isotope A has an initial weight of 95g, but after some time its weight was reduced to 5.9g being a half-life of 6 days. On what day it was measured?

Let's call the speed of the current "c". Then, the speed of the boat relative to the water when it is going upstream is 24 - c mph, and the speed of the boat relative to the water when it is going downstream is 24 + c mph.

Using the time it takes to travel the given distances, we can set up the following equation:

(54) / (24 - c) = (90) / (24 + c)

Expanding and solving for c, we find that:

c = 4 mph

So the speed of the current is 4 mph.

Answer: Upstream: 24 - 6 = 18  --->   54 = 18 x?  --->  ? = 54/18 = 3 hours

   (24 - 6)x 3 = 18 x 3 = 54 miles

   (24 + 6) x 3 = 30 x 3 = 90 miles

The speed of the current is 6 mph.

Time is 3 hours

Answer:

Explanation:

An absorption line spectrum occurs when light passes through a cloud of cool gas in space, such as an interstellar molecular cloud, a planetary atmosphere, or a circumstellar disk. The light from a star behind the cloud is absorbed by the atoms and molecules in the gas, which have a range of temperatures and densities.

When the light passes through the gas, the atoms and molecules in the gas absorb light at specific frequencies that correspond to the energy levels in the atoms. This results in missing or reduced light at those frequencies, which appears as dark lines against the otherwise continuous spectrum of the star.

The specific wavelengths of light that are absorbed depend on the chemical composition of the gas and its physical conditions, such as temperature and pressure. By analyzing the pattern of absorption lines in the spectrum, astronomers can learn about the composition, density, and temperature of the gas, as well as the velocity of the gas along the line of sight.

Absorption line spectra can also provide information about the physical conditions in the star itself, such as its temperature, surface gravity, and chemical composition, by analyzing the strength and shape of the lines. This information can help astronomers to better understand the processes occurring in stars, as well as in the interstellar medium, and the conditions necessary for the formation of stars and planetary systems.

The time taken for the light to travel a lightning strike to an observer 4.10 km away will be 1.36 × 10⁻⁵ seconds.

The speed of light is the rate at which the light ray travels in space. It is the total distance covered by the light ray in a particular time period.

Speed = Distance/ Time

speed = 3 × 10⁸ m/s

Distance = 4.10 km = 4.10 × 1000 = 4100 meters

Speed = Distance/ Time

Time = Distance/ Speed

Time = 4100/ 3 × 10⁸

Time = 4100 × 10⁻⁸/  3

Time = 1,366.66 × 10⁻⁸

Time = 1.36 × 10⁻⁵ seconds

Therefore, the time taken for the light to travel from a lightning strike to an observer 4.10 km away will be 1.36 × 10⁻⁵ seconds.

Learn more about Light here:

https://brainly.com/question/16713206

#SPJ9

Your question is incomplete, most probably the complete question is:

Light travels at a constant speed of 3.00x10^8 m/s, whereas sound travels through the air at a constant speed of 343 m/s. How long does it take for light to travel from a lightning strike to an observer 4.10 km away?

Answer:

The gravitational force between the Sun (mass = 1.99 × 1030 kg) and Mercury (mass = 3.30 × 1023 kg) is 8.99 × 1021 N

Explanation:

Answer:

Average force of gravitation between Mercury and the Sun is approximately 3.54 x 10^20 N.

Explanation:

The following equation determines the gravitational force between two objects:

F = G * (m1 * m2) / d^2

In this equation, F is the gravitational force, G is the gravitational constant (G = 6.67 x 10-11 Nm2/kg2), m1 and m2 are the objects' masses, and d is the space between their centres.

We need the masses of Mercury and the Sun as well as their typical separation in order to compute the average gravitational force between them.

The Sun's mass is roughly 1.989 x 1030 kg, while Mercury's mass is roughly 3.285 x 1023 kg. Mercury and the Sun are typically separated by around 57.9 million kilometres (0.39 astronomical units).

With these values entered into the formula, we obtain:

F is equal to G * (3.285 x 1023 kg) * (1.989 x 1030 kg) * (57.9 x 106 m) * 2

F is equal to G * (3.285 x 1023 kg) * (1.989 x 1030 kg) * (57.9 x 106 m) * 2

F = 3.54 x 10^20 N

To learn more about force of gravitation visit: https://brainly.com/question/21500344

The estimated total amount of positive charge in a 70 kg person is 5.88 Coulombs (C).

Since the human body is mostly made of water, we can assume that the total amount of positive charge is equal to the total amount of sodium ions (Na+) and other positively charged ions in the body.

The concentration of sodium ions in the human body is approximately 140 milliequivalents per liter (mEq/L), which is equivalent to 0.140 moles per liter (mol/L).

Assuming that the total volume of water in a 70 kg person is approximately 42 liters, we can estimate the total amount of sodium ions in the body as follows:

Total amount of sodium ions = concentration x volume of water
Total amount of sodium ions = 0.140 mol/L x 42 L
Total amount of sodium ions = 5.88 mol

Since each sodium ion has a charge of +1, the total amount of positive charge in a 70 kg person is also 5.88 C.

Therefore, the estimated total amount of positive charge in a 70 kg person is 5.88 Coulombs (C).

Learn more about ions here: brainly.com/question/14982375

#SPJ4

Answer:

Below

Explanation:

You can just use Pythagorean theorem for this one because the vectors are at a right angle to each other

59^2 + 33^2 = R^2

R = 67.6 N

The resulting amplitude of the two waves is 1.25 m

When two waves of different amplitudes interfere, the resulting wave pattern is determined by the relative phase and amplitude of the two waves. If the two waves are in phase, meaning that their peaks and troughs line up, they will reinforce each other and produce a wave with a larger amplitude. This is known as constructive interference.

In this case the amplitude of the resulting wave would be a combination of two amplitudes of the waves and that would be 1.25 m

Learn more about interference of waves:https://brainly.com/question/16622714

#SPJ1

part a.

the work done by gravity is approximately 1690 J.

part b.

the work done by the normal force is 0.

part c.

the work done by friction is approximately -671 J

part d.

the total work done is approximately 1019 J

work done is described  as the multiplication of magnitude of displacement d and the component of the force that is in the direction of displacement.

For part a, the work done by gravity can be found using the formula:

W_gravity = mgh

h = dsin(37°) = 8sin(37°) = 4.83 m

W_gravity = (35 kg) * (9.81 m/s^2) * (4.83 m) ≈= 1690 J

In conclusion, the same pattern can be followed to calculate for b, c and d.

Learn more about work done at: https://brainly.com/question/8119756

#SPJ1

Answer: Most of them need water to help reproduce & Most of them live in shady, moist, or humid areas.

Explanation:

Bryophytes are non-vascular plants, meaning they do not have specialized tissue for transporting water and nutrients throughout their bodies. Instead, they absorb nutrients and water from the environment. Bryophytes are usually short-lived and don't grow tall, and they prefer to live in shady, moist, or humid areas because they require water to help them reproduce.

The moment of inertia of the rigid body about the Y-axis is: [tex]9.6 kg m^2[/tex]

Moment of inertia, also known as rotational inertia, is a physical property of an object that measures its resistance to rotational motion around a particular axis. It is similar to the concept of mass in linear motion, as it measures the object's resistance to changes in its motion.

The moment of inertia of an object depends on its mass distribution and the location of its axis of rotation. Objects with more mass distributed further from the axis of rotation have a greater moment of inertia than objects with the same mass but distributed closer to the axis. It is calculated using the formula I = Σmr^2, where I is the moment of inertia, Σ is the sum over all the mass elements in the object, m is the mass of each element, and r is the distance of each element from the axis of rotation. The moment of inertia is typically measured in units of kilogram square meters (kg*m^2) in  the SI system.

The moment of inertia of a rigid body is defined as the sum of the products of the masses of each particle in the body and the square of the distance between each particle and the axis of rotation.

In this case, the particles are arranged in a square, so one can use the formula for the moment of inertia of a square plate about its centre of mass, which is:

[tex]I = (1/6) * m * a^2[/tex]

where m is the mass of the plate and a is the length of one side of the square.

In this problem, m = 4m (since there are four particles with mass m) and a = √2a (since the distance between opposite particles is √2a). Therefore, the moment of inertia of the rigid body about the Y-axis is:

[tex]I = (1/6) * (4m) * (2a)^2 = (4/3) * m * a^2 = (4/3) * 2.0 kg * (1.0 m)^2 = 8/3 kg m^2[/tex]

However, this moment of inertia is about the centre of mass of the rigid body, which is at the centre of the square. To find the moment of inertia about the Y-axis, use the parallel axis theorem, which states that the moment of inertia about an axis parallel to an axis through the centre of mass is equal to the moment of inertia about the centre of mass plus the product of the mass of the object and the square of the distance between the two axes.

In this case, the distance between the center of mass of the rigid body and the Y-axis is 0.5a. Therefore, the moment of inertia of the rigid body about the Y-axis is:

[tex]I = (8/3) kg m^2 + (4m) * (0.5a)^2 = (8/3) kg m^2 + 2.0 kg * (0.5 m)^2 = 9.6 kg m^2[/tex]

So the answer is C. [tex]9.6 kg m^2[/tex].

To know more about Moment of Inertia, visit:

https://brainly.com/question/3406242

#SPJ4

It will take the car 3.2 seconds to hit the ground.

Using the kinematic equation,

y = yo + vot + 1/2a*t^2

where y is the displacement (in this case, y = -58 m), yo is the initial displacement (yo = 0), vo is the initial velocity (vo = 0), a is the acceleration due to gravity (a = -9.81 m/s^2), and t is the time we want to find.

We can solve for t by rearranging the equation:

t = sqrt(2*y/a)

t = sqrt(2*(-58)/(-9.81))

t = 3.2 seconds (to two significant figures)

Time taken is 3.2 seconds.

To know more about the time, here

brainly.com/question/13286600

#SPJ4