Answer:
b) because the positive charge is on primary and a tertiary carbon
Explanation:
The allylic carbon atom carries positive charge when primary carbon has positive charge. It forms an ion with tertiary carbon atom to form resonance. In secondary carbocation the positive charge is on secondary carbon atom. The atom are attracted and electrons form carbon - carbon sigma.
I need to know the number of each atom
QUESTION 17
A mixture of hydrogen, helium and chlorine gases are in a container. The hydrogen has a partial pressure of 0.74 atm, the helium has a partial
pressure of 1.96 atm, and the chlorine has a partial pressure of 409 mmHg. What is the total pressure of the mixture, in atm?
Answer:
3.25 atm
Explanation:
convert 409 mm to atm, then add them all :
409mm / 760mm/atm + .74 + 1.96 = 3.24 atm
The total pressure of the mixture, in atm, is 3.25 atm
A container contains a mixture of hydrogen, helium, and chlorine gases. The partial pressures of the three gases are as follows: 0.74 atm for hydrogen, 1.96 atm for helium, and 409 mmHg for chlorine. 3.25 atm is the mixture's total pressure.
then multiply 409 mm by 1.0 atm, and then combine them all for total pressure :
409mm / 760mm/atm + .74 + 1.96 = 3.24 atm
When more than one gas is present in a container, each gas exerts pressure, which is how atmospheric pressure is defined. Its partial pressure refers to the pressure of any gas inside the container.
To learn more about Partial pressure please visit -
https://brainly.com/question/15075781
#SPJ4
Aqueous sulfuric acid (H2SO4) will react with solid sodium hydroxide (NaOH) to produce aqueous sodium sulfate (Na2SO4) and liquid water (H2O). Suppose 5.88g of sulfuric acid is mixed with 6.3 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 3 significant digits
Answer:
2.16 g H₂O
Explanation:
Since we are not given the limiting reagent, we need to convert both reactants into the product. The actual amount of product will be the smaller mass produced.
To find the answer, we need to (1) convert grams reactant to moles reactant (via molar mass), then (2) convert moles reactant to moles H₂O (via mole-to-mole ratio from balanced equation coefficients), and then (3) convert moles H₂O to grams H₂O (via molar mass). It is important to arrange the ratios in a way that allows for the cancellation of units.
The balanced equation:
1 H₂SO₄(aq) + 2 NaOH(s) -----> 1 Na₂SO₄(aq) + 2 H₂O(l)
Molar Mass (H₂SO₄): 2(1.008 g/mol) + 32.065 g/mol + 4(15.998 g/mol)
Molar Mass (H₂SO₄): 98.073 g/mol
Molar Mass (NaOH): 22.990 g/mol + 15.998 g/mol + 1.008 g/mol
Molar Mass (NaOH): 39.996 g/mol
Molar Mass (H₂O): 2(1.008 g/mol) + 15.998 g/mol
Molar Mass (H₂O): 18.014 g/mol
5.88 g H₂SO₄ 1 mole 2 moles H₂O 18.014 g
---------------------- x ----------------- x ------------------------ x ----------------- =
98.073 g 1 mole H₂SO₄ 1 mole
= 2.16 g H₂O
6.3 g NaOH 1 mole 2 moles H₂O 18.014 g
-------------------- x ----------------- x -------------------------- x ---------------- =
39.996 g 2 moles NaOH 1 mole
= 2.84 g H₂O
Since H₂SO₄ produces the smallest amount of product, it is the limiting reagent. In this case, H₂SO₄ is completely used up before NaOH has the chance to react totally. Therefore, the actual amount of H₂O produced is 2.16 g.
A neutral atom has high electronegativity.
Describe what happens to this atom during ionic bond formation.
Please get it cleared and stored into your cerebrum that a cation is formed when a neutral atom loses one or more electrons from its valence electron shell.
However too, on other hand an anion is formed when a neutral atom gains one or more electrons in its outermost electron shell.
A cation means a positive ion
An anion means a negative ion
What is electronegativity?Electronegativity is one of physical periodicity and property of elements that describes the tendency of an atom to attract electrons toward itself.
Generally, electronegativity of an atoms of elements in a particular trend is affected by both its atomic number and the distance that its valence electrons reside from the charged nuclei.
Learn more about electronegativity:
https://brainly.com/question/2456715
#SPJ1
Determine the freezing point depression of a solution that contains 2 moles of NaCl in 200 g of water. ( Kf = 1.86°C/m and Kb = 0.512°C/m.)
The freezing point depression of a solution that contains 2 moles of NaCl in 200 g of water (Kf = 1.86 °C/m) is 18.6 °C.
What is the freezing point depression?It is a decrease in the freezing point of a solution, in comparison with the pure solvent.
Step 1. Determine the molality of the solution.The solution contains 2 moles of NaCl in 200 g of water.
b = moles NaCl / Kg water = 2 mol/0.200 kg = 10 m
Step 2. Calculate the freezing point depression.Given the cryoscopic constant (Kf) is 1.86 °C/m for water, the freezing point depression (ΔT) is:
ΔT = Kf × b = 1.86 °C/m × 10 m = 18.6 °C
The freezing point depression of a solution that contains 2 moles of NaCl in 200 g of water (Kf = 1.86 °C/m) is 18.6 °C.
Learn more about freezing point depression here: https://brainly.com/question/14115775
#SPJ1
Where are these chemical reactions happening?
Answer:
At Anode: oxidation occurs i.e loss of electrons
At cathode: reduction occurs i.e gain of electrons
OPTION 1 is the correct answer
Given the reaction below, how many liters of oxygen are formed if 77.37 L of water are produced at STP? (4pts)
2C4H10 (g) + 13O2 (g) → 8CO2 (g) + 10H2O (g)
Round your answer to two decimal places.
1.2 x 10² L of oxygen is formed if 77.37 L of water is produced.
The density of water at STP = 0.99 g/ ml but we will assume 1 g/ml
Determine the mass of water ([tex]H_{2}[/tex]o) = 77.37 L × [tex]\frac{1000 ml}{1l}[/tex] × [tex]\frac{1g}{ml}[/tex]
The mass of water = 77370 g
Convert mass into moles = 77370 [tex]H_{2}[/tex]o × [tex]\frac{1mol}{18.01528} H _{2}O[/tex]
= 4294.6876 mol of [tex]H_{2} O[/tex]
Use stoichiometry to find how many mols of oxygen [tex]o_{2}[/tex] were used:
= 4294.6876 mol of [tex]H_{2} O[/tex] × [tex]\frac{13 mol }{10 mol}[/tex]
= 5583.0939 mol [tex]o_{2}[/tex]
Convert mols to mass = 5583.0939 mol ×[tex]\frac{32 g}{mol }[/tex]
= 178659.0059 g [tex]o_{2}[/tex]
Convert mass into liters
The density of [tex]o_{2}[/tex] at STP = [tex]\frac{1.439}{ml}[/tex]
Density of [tex]o_{2}[/tex] = 1.2 × [tex]10^{2}[/tex]
Hence,1.2 x 10² L of oxygen is formed if 77.37 L of water is produced.
To know more about Density refer to: https://brainly.com/question/16060223
#SPJ1
1.2 x 10² L of oxygen is formed if 77.37 L of water are produced at STP. The term is derived from the Greek word "oxy genes," which means "forms acid." a periodic table column that is vertical.
What is oxygen ?
The chemical element oxygen has an atomic number of 8. At normal temperatures and pressures, oxygen transforms into the chemical compound (O2) of two atoms, which is a colorless gas.
The density of H₂O at STP = 0.99 g ÷ ml, but we will assume 1 g/ml
The mass of H₂O = 77370 g
Use stoichiometry to find moles of oxygen given by
= 4294.6876 mol of X
= 5583.0939 mol
Convert moles into mass = 5583.0939 mol X
= 178659.0059 g
Then convert it into liter. 1.2 x 10² L of oxygen is formed if 77.37 L of water.
Thus, 1.2 x 10² L of oxygen is formed if 77.37 L of water are produced at STP.
To learn more about oxygen, follow the link;
https://brainly.com/question/1506082
#SPJ2
Which substance is not a solid at 20˚C and one atmosphere of pressure?
A. Kr
B. U
C. K
D. Ag
an analyst prepared a sucrose solution by weighing 1kg of water and add 1.5kg sucrose. estimate the concentration of the resultant solution in degree brix
The concentration of the solution is 60 degrees Brix.
What is degree Brix?Degrees Brix is the sugar content of an aqueous solution. One degree Brix is 1 gram of sucrose in 100 grams of solution and represents the strength of the solution a as percentage by mass.
Mass percent refers to the percentage of solute present in the solution.
The concentration of the substance can be expressed in mass percent.
we have to first calculate mass percent.
So, we can write,
Mass percent = mass of solute / mass of solution x 100.
Mass of solution = mass of solute + solvent.
Here, sucrose is the solute and the water is the solvent.
The mass of the solute is 1.5Kg and the mass of the solvent is 1Kg.
Mass of solution = 1.5 + 1 = 2.5 Kg.
Mass percent = 1.5/2.5x100
Mass percent is 60%.
Here, 1% = 1 degree brix.
So here, 60% = 60 degree brix.
Hence, the concentration of the solution is 60 degree brix.
For a detailed study about mass percent refer given link https://brainly.com/question/13896694.
#SPJ1.
What color does red cabbage juice make when mixed with a citrus cleaner?
Answer: PINK
Explanation:
The concentration of an HCl acid solution is initially 6mol/L. What would the concentration of a new solution be if 200 mL of the original HCl solution is diluted with 1L of water.
Taking into account the definition of dilution, the concentration of the new solution is 1 mol/L.
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.
Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeFinal volumeIn this case, you know:
Ci= 6 mol/LVi= 200 mLCf= ?Vf= 1 L (1000 mL) water + 200 mL of HCL= 1200 mLReplacing in the definition of dilution:
6 mol/L× 200 mL= Cf× 1200 mL
Solving:
(6 mol/L× 200 mL)÷ 1200 mL= Cf
1 mol/L= Cf
In summary, the concentration of the new solution is 1 mol/L.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
What is the generic name of this molecule? (Ph stands for phenyl)
The proper name of the compound is now 1,1 - dihydroxy-3-phenyl propene.
What is the name of the compound?Firstly we know that the parent chain is based on propane. Now we have three substituents on that parent chain. Two hydroxy moieties and one phenyl moiety.
The proper name of the compound is now 1,1 - dihydroxy-3-phenyl propene.
Learn more about names of molecules:https://brainly.com/question/26196615
#SPJ1
The buffer is prepared by adding 250mL of 0.80M NH3 to 150mL of 0.50M NH4NO3. What is the pH of the final solution (Kb for NH3 = 1.8 x 10^-5)
The pH of the solution is obtained to be 9.67.
What is a buffer?A buffer is a solution that serves to militate against changes in acidity or alkalinity. The buffer is often made of a solution of a strong acid and its salt or a weak base and its salt.
Now we have the that;
Number of moles of base = 250 /1000 * 0.80 = 0.2 moles
Number of moles of salt = 150/1000 * 0.50 = 0.075 moles
Total volume of the solution = 250 + 150 = 400 mL or 0.4 L
Molarity of the base = 0.2 moles/0.4 L = 0.5 M
Molarity of the salt = 0.075 moles/ 0.4 L = 0.1875 M
pKb = - log( 1.8 x 10^-5) = 4.74
pOH = pKb + log [salt/base]
pOH = 4.74 + log (0.1875/ 0.5)
pOH = 4.33
pH = 14 - 4.33
pH = 9.67
The pH of the solution is obtained to be 9.67.
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
Calculate the percent yield of a reaction that produced 0.350 mol HCI if the theoretical yield was 15.36 g
The percent yield of the reaction that produced 0.350 mol HCI is 83.17%
How to determine the actual yield (in grams)Mole of HCl = 0.350 moleMolar mass of HCl = 36.5 g/molActual yield =?Actual yield = 0.35 × 36.5
Actual yield = 12.775 g
How to determine the percentage yield Actual yield of HCl = 12.775 gTheoretical yield of HCl = 15.36 gPercentage yield =?Percentage yield = (Actual / Theoretical) × 100
Percentage yield = (12.775 / 15.36) ×100
Percentage yield = 83.17%
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
Enthalpy of reaction of nitrogen dioxide (use Hess Law)
N2(g) + 2O2(g) → 2NO2(g)
N2 + O2 → 2NO Hr= +180 kJmol-1
2NO + O2 → 2NO2 Hr= -112 kJmol-1
Starting Point Ending point
N2 (g) + 2O2 (g) → 2NO2 (g)
+180kJ -112kJ
2NO2 + O2 (g)
Use the information to calculate the H and explain how you got your answer.
Considering the Hess's Law, the enthalpy change for the reaction is 68 kJ/mol.
Hess's LawHess's Law indicates that the enthalpy change in a chemical reaction will be the same whether it occurs in a single stage or in several stages. That is, the sum of the ∆H of each stage of the reaction will give us a value equal to the ∆H of the reaction when it occurs in a single stage.
Enthalpy of reaction of nitrogen dioxideIn this case you want to calculate the enthalpy change of:
N₂ + 2 O₂ → 2 NO₂
which occurs in two stages.
You know the following reactions, with their corresponding enthalpies:
Equation 1: N₂ + O₂ → 2 NO ΔH = 180 kJ/mol
Equation 2: 2 NO + O₂ → 2 NO₂ ΔH = –112 kJ/mol
Because of the way formation reactions are defined, any chemical reaction can be written as a combination of formation reactions, some going forward and some going back.
In this case, first, to obtain the enthalpy of the desired chemical reaction you need one mole of N₂ on reactant side and it is present in first equation so let's write this as such.
In the same way, you need two moles of NO₂ on product side and it is present in second equation so let's write this as such.
Finally, in this way the two moles of NO cancel.
Then, it is not necessary to modify the given equations. So, adding or canceling the reactants and products as appropriate, and adding the enthalpies algebraically, you obtain:
N₂ + 2 O₂ → 2 NO₂ ΔH= 68 kJ/mol
Finally, the enthalpy change for the reaction is 68 kJ/mol.
Learn more about Hess Law:
brainly.com/question/5976752
brainly.com/question/13707449
brainly.com/question/13707449
brainly.com/question/6263007
brainly.com/question/14641878
brainly.com/question/2912965
#SPJ1
What happens when food first touches your tongue?
Answer:
you will taste the flavour of the food
State which substance is undergoing oxidation and which substance is undergoing reduction in the following reaction:
2 K (s) + CuCl2 (aq) ---> 2 KCl (aq) + Cu (s)
Answer:
Oxidation - K
Reduction - Cu
Explanation:
2K --> 2K^+
Cu^+2 --> Cu
A rock displaces 1.65 L of water. The volume of the rock is:
Answer:
If a rock displaces 1.65L of water, its volume must be 1.65L.
If you want to convert that to cm^3 it's 1000 cm^3 per liter...so 1650 cm^3
Explanation:
What color does red cabbage juice make when mixed with a citrus cleaner?
What color does red cabbage juice make when mixed with a dishwasher soap?
(WILL MARK BRAINLIEST!!!)
Answer:
Explanation:
green
Put the following energy sublevels in order from least to greatest energy.
A. 1s, 2s, 3s, 4s, 2p, 3p, 4p, 3d, 4d, 4f
B. 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f
C. 1s, 2s, 2p, 3s, 3p, 3d, 4s, 4p, 4d, 4f
D. None of these
The correct order is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f. The correct option is B.
Order of energy sublevelsThe correct order of energy sublevel is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
Thus, with the exclusion of 5s, 5p, 6s, 5d, 6p, 7s, 5f, 6d, and 7p, what we have left in order of increasing energy is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f.
More on energy sublevels can be found here: energy sublevels
#SPJ1
The correct order from least to greatest energy for the energy sublevels is; 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f (Option B).
What is the Aufbau principle?The Aufbau principle offers a method in which the energy levels in an atoms are arranged from the least to the greatest. We know that electrons are filled into orbitals in order of increasing energy.
Thus, the correct order from least to greatest energy for the energy sublevels is; 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f (Option B).
Learn more about the Aufbau principle:https://brainly.com/question/13393709
#SPJ1
Predict the products of the double replacement reactions given. Check to see that the equations are
balanced.
AgNO3 + NaCl → ?
O AgNa+CINO3
NaNO3 + AgCl (s)
O 2NaNO3 + 3AgCl (s)
O Ag + NaNO3
Answer:
Option (2)
Explanation:
The two compounds formed will be AgCl and NaNO₃.
We can see that this will result in a balanced equation, so the answer is Option (2).
Answer:
B) NaNO3 + AgCl (s)
Explanation:
edge 2023
Compare and contrast electron behavior in Rutherford’s, Bohr’s, and the quantum models
Rutherford’s, Bohr’s, and the quantum models say that electrons behave as particles, electron is negatively charged and electrons behave both particles and wave respectively.
What Rutherford’s, Bohr’s, and the quantum models say about electron?Bohr model states that electrons behave as particles, Rutherford's model proposed that the negatively charged electrons surround the nucleus of an atom whereas quantum model explains that the electron has both particle and wave behavior.
So we can conclude that Rutherford’s, Bohr’s, and the quantum models say that electrons behave as particles, electron is negatively charged and electrons behave both particles and wave respectively.
Learn more about electron here: https://brainly.com/question/860094
#SPJ1
can someone please fill this out for me
Filling out the table of elements below following the outlined order:
Calcium - symbol = Ca; Group =2; Period = 4; Ar = 134; Am =40.078u; Ph = solid; Density = 1.55; Bp = 1757K; Mp = 1115K.Vanadium - symbol = V; Group =5; Period = 4; Ar = 197; Am =50.9415u; Ph = solid; Density = 6.11; Bp = 3680K; Mp = 2183K.Manganese - symbol = Mn; Group =7; Period = 4; Ar = 127; Am = 54.938044u; Ph = solid; Density = 7.21; Bp = 2334K; Mp = 1519K.Cobalt: - symbol = Co; Group =9; Period = 4; Ar = 125; Am =58.933195 u; Ph = solid; Density = 8.90; Bp = 3200K; Mp = 1768K.Zinc: - symbol = Zn; Group = 12; Period = 4; Ar = 134; Am =65.38 u; Ph = solid; Density = 7.14; Bp = 1180K; Mp = 692.68K.Arsenic: - symbol = As; Group = 15; Period = 4; Ar = 197; Am = 74.9216 u; Ph = solid; Density = 5.75; Bp = 889K; Mp = 889K.Bromine: - symbol = Br; Group =17; Period = 4; Ar = 120; Am = 79.904 u; Ph = Liquid; Density = 3.1028; Bp = 332K; Mp = 265K.Meaning of ElementAn element can be defined as a substance that can not be broken down into simpler substances.
An element serves as a building blocks for compounds and mixtures.
In conclusion, each element and its property as requested in the table are given above.
Learn more about element : brainly.com/question/18096867
#SPJ1
CH3CH2OH and CH3CHO
Which is more acidic??
Answer:
CH3CH2OH
Explanation:
CH3CH2OH the ethanol is regarded as neutral since pH is very close to 7 and CH3CHO or acetaldehyde is an extremely weak basic max pH of 8.
Question 5
Now, provide the following information about your chosen molecule: Percent composition of each element
The molecule is water. Molecular formula of water is H₂O. Molecular weight of water is 18 g. The percentage composition of hydrogen and oxygen in water is 11.11 % and 88.89 %. Intermolecular force in water is dipole-induced dipole and London dispersion.
Which molecule is Vital to human body ?Name of the molecule is Water. Molecular formula of the compound is H₂O.
What is the Molecular mass of water ?Molecular mass of H₂O = 2 × Atomic weight of H + Atomic weight of O
= 2 × 1 + 16
= 2 + 16
= 18
The water molecule is Covalent because hydrogen atoms share electrons with the oxygen atom.
How to find the percentage composition ?Percentage composition = [tex]\frac{\text{Mass of element}}{\text{Molar Mass}}[/tex]
Now,
Molar mass of Water = 18
Percentage composition of hydrogen = [tex]\frac{2}{18} \times 100[/tex]
= 11.11 %
Percentage composition of Oxygen = [tex]\frac{16}{18} \times 100[/tex]
= 88.89 %
In water molecule dipole-induced dipole and London dispersion forces are present because water has H-bonds.
The given molecule is water. Water is important for human body to keep a normal temperature. It carries nutrients. It protects our body organs and tissues. The function of water is to serves a s a lubricant. It helps to prevent constipation. It makes up Saliva.
Thus from the above conclusion we can say that The molecule is water. Molecular formula of water is H₂O. Molecular weight of water is 18 g. The percentage composition of hydrogen and oxygen in water is 11.11 % and 88.89 %. Intermolecular force in water is dipole-induced dipole and London dispersion.
Learn more about the Water Molecule here: https://brainly.com/question/1313076
#SPJ1
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Questions: Choose one molecule that is vital to the human body. Provide the following information: Name of the molecule
Now, provide the following information: Molecular formula
Now, provide the following information about your chosen molecule: Molecular mass
Now, provide the following information about your chosen molecule: The type of molecule (covalent or ionic)
Now, provide the following information about your chosen molecule: Percent composition of each element
Now, provide the following information about your chosen molecule: Intermolecular forces within the molecular
Now, provide the following information about your chosen molecule: Describe why the molecule is important and its function within the human body.
What does a change in the entropy of a system indicate?
A.
That the disorder of the system has changed
B.
That the equilibrium position has changed
C.
That the energy of the system has changed
D.
That the activation energy has changed
A change in the entropy of a system indicate that the disorder of the system has changed. Option A
What is a change in entropy?A change in entropy indicates is a measure of the disorder, or randomness, in a system.
An increased value of entropy means more disorder, and a decreased value of entropy means less disorder.
These changes in entropy occur spontaneously
Thus, a change in the entropy of a system indicate that the disorder of the system has changed. Option A
Learn more about entropy here:
https://brainly.com/question/15022152
#SPJ1
Which part of thr drug discovery life cycle can quantum computung impact the most
Molecular simulation is the part of the drug discovery life cycle that most likely uses quantum computing.
What is drug discovery?Drug discovery refers to the process to identify and validate medications in pharmaceutical research.
Drug discovery exploits computational approaches based on quantum modeling to accelerate this process.
In conclusion, molecular simulation is the part of drug discovery associated with quantum computing.
Learn more about drug discovery here:
https://brainly.com/question/14330435
#SPJ1
How many grams of Aspirin (acetylsalicylic acid) should we form in this reaction if we started with 2.08g of Salicyclic Acid?
Taking into account the reaction stoichiometry, 2.713 grams of aspirin are formed when 2.08 grams of salicyclic acid reacts.
Reaction stoichiometryIn first place, the balanced reaction is:
C₄H₆O₃ + C₇H₆O₃ (Salicyclic Acid) →C₉H₈O₄ (aspirin) + C₂H₄O₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₄H₆O₃: 1 moleC₇H₆O₃: 1 moleC₉H₈O₄: 1 moleC₂H₄O₂: 1 moleThe molar mass of the compounds is:
C₄H₆O₃: 102 g/moleC₇H₆O₃: 138 g/moleC₉H₈O₄: 180 g/moleC₂H₄O₂: 60 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
C₄H₆O₃: 1 mole ×102 g/mole= 102 gramsC₇H₆O₃: 1 mole ×138 g/mole= 138 gramsC₉H₈O₄: 1 mole ×180 g/mole= 180 gramsC₂H₄O₂: 1 mole ×60 g/mole= 60 gramsMass of aspirin formedThe following rule of three can be applied: if by reaction stoichiometry 138 grams of salicyclic acid form 180 grams of aspirin, 2.08 grams of salicyclic acid form how much mass of aspirin?
[tex]mass of aspirin=\frac{2.08 grams of salicyclic acidx 180 grams of aspirin}{138 grams of salicyclic acid}[/tex]
mass of aspirin= 2.713 grams
Then, 2.713 grams of aspirin are formed when 2.08 grams of salicyclic acid reacts.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
A methane molecule, CH4, in the stratosphere or (2) a CH3 molecule and a hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH4 molecule.
The methane molecule in the stratosphere has a higher potential energy than the CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule.
The complete question is:
For each of the following situations, you are asked which of two objects or substances has the higher energy. Explain your answer with reference to the capacity of each to do work and say whether the energy that distinguishes them is kinetic energy or potential energy.
a. (1) A methane molecule, CH4, in the stratosphere or (2) a CH3 molecule and a hydrogen atom formed from breaking one of the carbon-hydrogen bonds in a CH4 molecule.
Which have a higher energy?The methane molecule in the stratosphere is a stable molecule and possesses chemical potential energy.
The CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule are unstable molecules and possesses kinetic energy. However, some of their energy has been used in breaking the bond.
Thus, the methane molecule in the stratosphere has a higher potential energy than the CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule.
In conclusion, the energy in the methane molecule is higher.
Learn more about potential energy at: https://brainly.com/question/14427111
#SPJ1
It takes 50.0 J to raise the temperature of an 10.6 g piece of unknown metal from 13.0°C to 24.9 °C.
What is the specific heat for the metal?
Express your answer with the appropriate units.
Answer:
0.396 J/g°C (to 3 sf)
Explanation:
50.0 = 10.6(24.9-13.0)(c)
c = 0.396 J/g°C (to 3 sf)