The computer has a fully associative cache with 64 blocks and each block has 32 bytes.
Fully associative cache is a type of cache memory where a memory block can be placed in any cache block. This means that there is no specific location for a memory block in the cache. The cache in this computer has 64 blocks and each block contains 32 bytes.
To determine the size of the cache, we can use the formula Cache size = Number of cache blocks * Block size In this case, the number of cache blocks is 64 and the block size is 32 bytes. So, the cache size is: Cache size = 64 * 32 bytes = 2048 bytes To find the maximum size of the memory that can be accessed using this cache, we can use the formula: Maximum memory size = Number of cache blocks * Block size * Number of bits for memory addresses The computer has 216 bytes of byte-addressable main memory, which means that the maximum number of bits for memory addresses is: Number of bits for memory addresses = log2(216) = 8 + log2(65536) = 8 + 16 = 24 bits So, the maximum memory size that can be accessed using this cache is: Maximum memory size = 64 * 32 bytes * 2^24 = 4 GB
This means that the fully associative cache can access up to 4 GB of memory.
To know more associative cache visit:
https://brainly.com/question/31086075
#SPJ11
In this scenario, the fully associative cache with 64 blocks can hold a total of 64*32 = 2048 bytes. Therefore, not all of the main memory can fit into the cache.
However, any byte in the main memory can be mapped to any block in the cache, as there are no restrictions on the mapping function. This means that cache hits are more likely, as any requested byte can be stored in any block in the cache. However, cache misses will be more expensive, as the entire cache must be searched for the requested byte. Overall, fully associative cache can be useful for systems with small main memory sizes and high performance requirements.
we will break it down step-by-step:
1. Main memory size: The computer has 216 bytes of byte-addressable main memory. This means there are 2^16 (65,536) memory locations in the main memory.
2. Cache blocks: The cache consists of 64 blocks, and each block can hold 32 bytes. Therefore, the total cache size is 64 * 32 = 2,048 bytes.
3. Fully associative cache: In a fully associative cache, any block from main memory can be mapped to any block in the cache, providing flexibility in managing memory.
Now, you can use this information to analyze and understand the workings of this computer's memory system, its cache performance, and any other relevant aspects of its memory hierarchy.
To know about Cache visit:
https://brainly.com/question/28232012
#SPJ11
# input a mark in a subject of a student and
Check if the student is pass or not pass [pass mark=30]
Answer:
mark = int(input("Enter mark: "))
if (mark >= 30):
print("Pass")
else:
print("Not pass")
What is the name of the function below?
function go(){
alert("hello everybody");
}
Answer:
It’s Java script I think and it makes something say hello everybody
Explanation:
Explain in not less than 3 Sentences
1. Decimal Number System
2.Binary Number System
Answer:
The Decimal Numeral system :-
It is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral system.
Binary Number system :-
It is a number expressed in the base-2 numeral system , which uses only two symbols: typically "0" and "1". The base-2 numeral system is a positional notation with a radix of 2. Each digit is referred to as a bit, or binary digit.
hope it helps you...
What is programming?
Answer:
using code etc to change how something works out make it work how you want it to. mostly code but sometimes circuit boards and stuff like that.
Explanation:
see above
Answer:
Programming is the process of creating a set of instructions that tell a computer how to perform a task.
WHAT IS MULTIMEDIA SUPPOSED TO MEAN ???
Answer:
using more than one medium of expression or communication
Answer:
It basically means using more than one expression or form of communication
Explanation:
a collection of logically related instructions is called _______
Answer:
Data Base from what I know
Explanation:
1. ¿Dónde emergieron los Bancos Centrales? 2. ¿En qué siglo los Bancos Centrales se potenciaron? 3. ¿El Banco de Suecia en qué siglo fue fundado? 4. ¿En el año de 1694 qué Banco se creó? 5. ¿Quién creo en 1800 el Banco Francés? 6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos? 7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo? 8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Answer:
. ¿Dónde emergieron los Bancos Centrales?
El primer banco central fue creado por el Parlamento Sueco en 1668, siendo su principal acreedor la Corona Sueca. Esto generó inflación y crisis financieras. Después de un siglo, en 1779, la ley fue modificada, obligando al Banco a que la masa monetaria fuese respaldada por oro en una proporción fija. Sin embargo, comenzó la guerra con Rusia y se regresó a su origen violando el precepto de estabilidad que confería ese patrón oro.
2. ¿En qué siglo los Bancos Centrales se potenciaron?
La historia de la banca central se remonta al menos al siglo XVII, con la fundación de la primera institución reconocida como un banco central, el Banco de Suecia.
3. ¿El Banco de Suecia en qué siglo fue fundado?
El primer banco central fue creado por el Parlamento Sueco en 1668.
4. ¿En el año de 1694 qué Banco se creó?
En 1694, se creó el Banco de Inglaterra, que sería el más famoso banco central durante casi 300 años.
5. ¿Quién creo en 1800 el Banco Francés?
Fue creado por Napoleón en 1800 para estabilizar la moneda después de la hiperinflación del papel moneda generado durante la Revolución Francesa y las conquistas napoleónicas.
6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos?
A principios del siglo XIX, Estados Unidos creó el Banco de los Estados Unidos (1791-1811) y luego un segundo Banco de los Estados Unidos (1816-1836) tras el cierre del primero. Ambos bancos se establecieron siguiendo el modelo del Banco de Inglaterra. Pero a diferencia de los británicos, los estadounidenses tuvieron una desconfianza profunda de cualquier concentración de poder financiero en general, y de los bancos centrales, en particular.
7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo?
Abraham Lincoln creó el primer y único Banco Central público del país, con el objetivo de garantizar los pagos de guerra.
8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Se exigió la creación de una estructura crediticia flexible que fuera capaz de dar respuestas a las empresas de ferrocarril y a los barcos de vapor,
Explanation:
. ¿Dónde emergieron los Bancos Centrales?
El primer banco central fue creado por el Parlamento Sueco en 1668, siendo su principal acreedor la Corona Sueca. Esto generó inflación y crisis financieras. Después de un siglo, en 1779, la ley fue modificada, obligando al Banco a que la masa monetaria fuese respaldada por oro en una proporción fija. Sin embargo, comenzó la guerra con Rusia y se regresó a su origen violando el precepto de estabilidad que confería ese patrón oro.
2. ¿En qué siglo los Bancos Centrales se potenciaron?
La historia de la banca central se remonta al menos al siglo XVII, con la fundación de la primera institución reconocida como un banco central, el Banco de Suecia.
3. ¿El Banco de Suecia en qué siglo fue fundado?
El primer banco central fue creado por el Parlamento Sueco en 1668.
4. ¿En el año de 1694 qué Banco se creó?
En 1694, se creó el Banco de Inglaterra, que sería el más famoso banco central durante casi 300 años.
5. ¿Quién creo en 1800 el Banco Francés?
Fue creado por Napoleón en 1800 para estabilizar la moneda después de la hiperinflación del papel moneda generado durante la Revolución Francesa y las conquistas napoleónicas.
6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos?
A principios del siglo XIX, Estados Unidos creó el Banco de los Estados Unidos (1791-1811) y luego un segundo Banco de los Estados Unidos (1816-1836) tras el cierre del primero. Ambos bancos se establecieron siguiendo el modelo del Banco de Inglaterra. Pero a diferencia de los británicos, los estadounidenses tuvieron una desconfianza profunda de cualquier concentración de poder financiero en general, y de los bancos centrales, en particular.
7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo?
Abraham Lincoln creó el primer y único Banco Central público del país, con el objetivo de garantizar los pagos de guerra.
8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Se exigió la creación de una estructura crediticia flexible que fuera capaz de dar respuestas a las empresas de ferrocarril y a los barcos de vapor,
what is a defult? pls help if you wouldn't mind
Answer:
a beginner or a novice
Explanation:
3 uses for a GPS system other than for a satellite navigation system
Answer:
Location – determining a position. Navigation getting from one location to another. Tracking – monitoring object or a personal movement. Mapping – creating maps of the world.
Describe some common types of charts.
Answer:
The four most common are probably line graphs, bar graphs and histograms, pie charts, and Cartesian graphs. They are generally used for, and are best for, quite different things.
Explanation:
Line chart- A graph with points connected by lines to show how something changes in value: • as time goes by, • or as something else changes.
Example: how you are improving at a quiz each day.
Bar chart- A graph drawn using rectangular bars to show how large each value is. The bars can be horizontal or vertical. It is a really good way to show relative sizes. We can use bar graphs to show the relative sizes of many things, such as what type of car people have, how many customers a shop has on different days and so on.
Histogram- a graphical display of data using bars of different heights. It is similar to a Bar Chart, but a histogram groups numbers into ranges . The height of each bar shows how many fall into each range.
Pie chart- a special chart that uses "pie slices" to show relative sizes of data. It is a really good way to show relative sizes.
Cartesian chart- This is a type of chart that uses coordinates to pinpoint where something is on a map or graph. Using Cartesian Coordinates we mark a point on a graph by how far along and how far up it is.
What line of code would you edit if you wanted a bigger sprite?This is computer science.Pick branliest if right
A.3
B.4
C.5
D.You have to edit the picture itself
Answer:
C. 5
Explanation:
Line 3 refers to the positioning of the sprite.
Line 4 refers to the animation preset of the sprite.
Line 5 is the correct choice because in the code it references scale and a value which can be modified to make the sprite bigger. For example, from 0.3 to 0.5
If I'm right please give brainliest, thanks
When you click on what will happen?
The font will change back to the default setting.
The document will change back to the last time you saved it.
The last step will be undone.
The last step will be redone.
The last step is undone. The default font choices in Microsoft Word are one of the biggest sources of ongoing annoyance for legal users.
What is Default setting?you can alter just two Styles (+Body and +Headings) permanently to give your papers a more professional typography.
There is a drop-down menu labeled Fonts over to the far right. You can view a list of preconfigured font sets by clicking on Fonts. You want to select Customize Fonts from here.
You can see the Body font and the Heading font on the left. Here is where you control the two Styles, +Body and +Headings, that I mentioned previously.
Therefore, The last step is undone.
To learn more about default font, refer to the link:
https://brainly.com/question/21104940
#SPJ1
Answer: C The last step will be undone. this is the Undo Icon
Explanation:
A type of topology in which all the systems a connected a main cable
Answer:
Bus topology uses one main cable to which all nodes are directly connected. The main cable acts as a backbone for the network. One of the computers in the network typically acts as the computer server. The first advantage of bus topology is that it is easy to connect a computer or peripheral device.
What are some other projects or things you do in your life (other than writing an essay) where you use an iterative process?
Answer:The iterative design process occurs in a continuous cycle involving three unique stages: formulate, test, evaluate. These core elements make up the basic progression in which the development of a game will follow. The rest is simply rinse and repeat
Explanation:
Answer:
Coke has experimented with different formulations of its popular Coca Cola product, including the failed New Coke iteration. The aim is to achieve the best tasting product that customers like.
A company that is operating a factory or assembly line may experiment with different methods of arranging the assembly line or with different production methods. Each time the production process is changed, this is a different iteration. Each time the order of operations and procedures are changed, this is a different iteration. The goal is to achieve the fastest, best and most optimal method of creating a product.
A musician may start with one version of a song and refine it, making changes to a note here and there or changing the tempo and speed. Many different iterations of a song may be created this way until the optimal finished product has been created that sounds and works the best.
A cook may experiment with a recipe, tweaking the ingredients or changing different steps of the process slightly until the food tastes as good as it possibly can.
Microsoft has released multiple versions of the Windows operating system to add functionality for users and to correct bugs. Each different version is a different iteration of its operating system and the goal is for the next iteration to be better than the last.
Explanation:
Pick an example, and put it in your own words.
If someone said to you, “Pseudocode is a waste of time! It’s just more work because you end up writing the same program twice,” how would you explain the benefits of pseudocode?
Answer:
It allows the designer to focus on main logic without being distracted by programming languages syntax.
* Since it is language independent, it can be translated to any computer language code.
* It allows designer to express logic in plain natural language.
* It is easier to write actual code using pseudocode.
* Unlike algorithms, pseudocodes are concise so pseudocodes are more readable and easier to modify.
Explanation:
What percentage of teens say they have witnessed cyberbullying?
50
95
70
35
A Majority of Teens Have Experienced Some Form of Cyberbullying. 59% of U.S. teens have been bullied or harassed online, and a similar share says it's a major problem for people their age
254 × (×) igual 20×()682883993
What storyboarding technique uses a combination of two techniques, and which techniques does it combine?
O A. hierarchical; wheel and linear
O B. linear; webbed and hierarchical
O C. webbed; linear and hierarchical
© D. wheel; webbed and linear
Answer:
d
Explanation:
Answer:
They're right, it's c: webbed; linear and hierarchical
Explanation:
Edmentum, I got it right.
Could someone please help?
Answer:
it looks difficult
Explanation:
you can devotingly solve it
Which option is the default when creating appointments and meetings in a user’s own calendar as it relates to Free/Busy information that others will see when looking at the user’s calendar?
a. Free
b. Working Elsewhere
c. Busy
d. Tentative
I only have 10 minutes left so please help fast!
Answer:
C !
Explanation:
Answer:
Busy
Explanation:
Need help ASAP
Thankss + BRAINLIST only for correct answers
Find the cost of 2m 20cm at 25p per metre
Answer: 55 meters.
Explanation:
First convert the 20 cm to meters so the entire number is in meters.
1 meter = 100 cm
20 in cm is:
= 20/100
= 0.2 meters.
2.2 meters.
One meter costs 25p so 2.2 meters will cost:
= 2.2 * 25
= 55 meters
Choose all items that are true about the two example of HTML shown on the right.
Example 1 will display differently than example 2 in a web browser.
They are styled differently, but will look the same in a web browser.
Example 2 is easier to analyze and repair.
The styling in example 2 is required by modern web browsers.
Answer:
2
Explanation:
Answer:
B and C
Explanation:
PLS HELP ASAP suppose you want to find pages that contain the word German but not the word shepherd. which search would achieve this?
German OR shepherd
German- shepherd
"GERMAN shepherd"
"German"+"shepherd"
Answer: German- shepherd
Explanation:
If I want to find pages that contain the word German but not the word shepherd, the search would achieve this would be German- shepherd.
It should be noted that other options such as German OR shepherd, "GERMAN shepherd" and "German"+"shepherd" all mean that pages containing the words German and also shepherd will be found.
The (-) sign simply means that not. Therefore, the correct option is German - shepherd which means German but not shepherd.
Answer:
German- shepherd
Explanation:
In French class, Blue puts on a visor and the environment changes to that of a café in Paris. Which of the following terms describes this kind of technology?
Answer:
virtual reality
Explanation:
Answer:
virtual
Explanation:
virtual and realyty
I need help writing the algorithm I know how to do the flow chart for the first one but I’m not sure if the second question is a for loop
Answer:
The algorithm is as follows:
(a) Sales and commission
1. Start
2. Input Sales
3. Commission = 0.30 * Sales
3. If sales >= 4000.00 then
3.1 Commission = 0.60 * Sales
4. End If
5. Print Commission
6. Stop
(b) Amount of Rainfall
1. Start
2. Days = 1
3. Total = 0.0
4. While Days <= 31
4.1. Input Rainfall
4.2. Total = Total + Rainfall
4.3. Days = Days + 1
4.4. End If
5. Print Total
6. Stop
See attachment for flowchart
Explanation:
(a) Sales and commission
This begins the algorithm
1. Start
This gets sales from the user
2. Input Sales
This calculates the commission based on 30% (i.e. for sales < 4000)
3. Commission = 0.30 * Sales
This checks if sales is greater than or equal to 4000
3. If sales >= 4000.00 then
This calculates the commission as 60% of Sales
3.1 Commission = 0.60 * Sales
This ends the if condition
4. End If
This prints the calculated commission
5. Print Commission
This ends the algorithm
6. Stop
(b) Amount of Rainfall
This begins the algorithm
1. Start
This initializes the number of days to 1
2. Days = 1
This initializes total rainfall to 0
3. Total = 0.0
The following while loop is repeated until day 31st
4. While Days <= 31
This gets input for Rainfall from the user
4.1. Input Rainfall
This calculates the total rainfall
4.2. Total = Total + Rainfall
This increments the number of days
4.3. Days = Days + 1
This ends the if statement
4.4. End If
This prints the total rainfall
5. Print Total
This ends the algorithm
6. Stop
___________ is a computer programming language.
6. A presentation is widely used to present and effectively
Answer:
A Presentation is a collection of slides arranged in a systematic order. 2) A presentation ...
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
PLEASE HELP ITS TIMED Ishmael would like to capture a selected portion of his screen and then capture actions he performs on that selected portion. What should he do?
Use the Video from My PC command.
Use the Insert Screen Recording control.
Create a poster frame.
Use an embed code.
Answer:
Option B
Hope this Helps!!! :)
Enumerate the steps on how to set-up the CD-ROM as the first boot device.
Answer:
Explanation:
1)Press boot key ( Del or specified key)
to enter BIOS setup utility.
2) using the direction keys, make selection of "Advanced BIOS Features"
3)then access Advanced BIOS setting by pressing Enter key
4. Using up/ down arrow keys Select "First Boot
Device"
.
5) Using up and down keys, select "CD-ROM "
6. go back to "BIOS setting screen" by Pressing ESC key
7. Select " Save & Exit Setup"
.
Para que se utilizan las siguientes plataformas: Matlab, Labview, VisualBasic, Mplab, Micropic, PicCompiller
Answer:
MATLAB (abreviatura de MATrix LABoratory, «laboratorio de matrices») es un sistema de cómputo numérico que ofrece un entorno de desarrollo integrado (IDE) con un lenguaje de programación propio (lenguaje M). Está disponible para las plataformas Unix, Windows, macOS y GNU/Linux.
Entre sus prestaciones básicas se hallan la manipulación de matrices, la representación de datos y funciones, la implementación de algoritmos, la creación de interfaces de usuario (GUI) y la comunicación con programas en otros lenguajes y con otros dispositivos hardware.
LABVIEW (acrónimo de Laboratory Virtual Instrument Engineering Workbench) es una plataforma y entorno de desarrollo para diseñar sistemas, con un lenguaje de programación visual gráfico pensado para sistemas hardware y software de pruebas, control y diseño, simulado o real y embebido.
Visual Basic (VB) es un lenguaje de programación dirigido por eventos, desarrollado por Alan Cooper para Microsoft. Este lenguaje de programación es un dialecto de BASIC, con importantes agregados. Su primera versión fue presentada en 1991, con la intención de simplificar la programación utilizando un ambiente de desarrollo.
MPLAB es un editor IDE gratuito, destinado a productos de la marca Microchip. Este editor es modular, permite seleccionar los distintos microcontroladores soportados, además de permitir la grabación de estos circuitos integrados directamente al programador.
MICROPICUn PIC es un circuito integrado programable (Programmable Integrated Circuited), el cual contiene todos los componentes para poder realizar y controlar una tarea, por lo que se denomina como un microcontrolador. Los PIC son una familia de microcontroladores tipo RISC fabricados por Microchip Technology Inc. y derivados del PIC1650, originalmente desarrollado por la división de microelectrónica de General Instrument.
PICCOMPILER
El Portable C Compiler o Compilador de C Portable (también conocido como pcc o, algunas veces, como pccm - máquina de compilador de C portable) fue uno de los primeros compiladores para el lenguaje de programación C escrito por Stephen C. Johnson de los Laboratorios Bell a mediados de los 70, basado, en parte, en las ideas de un trabajo previo de Alan Snyder en 1973.
Explanation:
MATLAB (abreviatura de MATrix LABoratory, «laboratorio de matrices») es un sistema de cómputo numérico que ofrece un entorno de desarrollo integrado (IDE) con un lenguaje de programación propio (lenguaje M). Está disponible para las plataformas Unix, Windows, macOS y GNU/Linux.
Entre sus prestaciones básicas se hallan la manipulación de matrices, la representación de datos y funciones, la implementación de algoritmos, la creación de interfaces de usuario (GUI) y la comunicación con programas en otros lenguajes y con otros dispositivos hardware.
LABVIEW (acrónimo de Laboratory Virtual Instrument Engineering Workbench) es una plataforma y entorno de desarrollo para diseñar sistemas, con un lenguaje de programación visual gráfico pensado para sistemas hardware y software de pruebas, control y diseño, simulado o real y embebido.
Visual Basic (VB) es un lenguaje de programación dirigido por eventos, desarrollado por Alan Cooper para Microsoft. Este lenguaje de programación es un dialecto de BASIC, con importantes agregados. Su primera versión fue presentada en 1991, con la intención de simplificar la programación utilizando un ambiente de desarrollo.
MPLAB es un editor IDE gratuito, destinado a productos de la marca Microchip. Este editor es modular, permite seleccionar los distintos microcontroladores soportados, además de permitir la grabación de estos circuitos integrados directamente al programador.
MICROPICUn PIC es un circuito integrado programable (Programmable Integrated Circuited), el cual contiene todos los componentes para poder realizar y controlar una tarea, por lo que se denomina como un microcontrolador. Los PIC son una familia de microcontroladores tipo RISC fabricados por Microchip Technology Inc. y derivados del PIC1650, originalmente desarrollado por la división de microelectrónica de General Instrument.
PICCOMPILER
El Portable C Compiler o Compilador de C Portable (también conocido como pcc o, algunas veces, como pccm - máquina de compilador de C portable) fue uno de los primeros compiladores para el lenguaje de programación C escrito por Stephen C. Johnson de los Laboratorios Bell a mediados de los 70, basado, en parte, en las ideas de un trabajo previo de Alan Snyder en 1973.