For what value of x is the figure a rectangle? Please help

365,000

lots of speed added together with air resistance

Answer:

The bunny ran 68 units and the average speed is 4 units per minute.

Step-by-step explanation:

Since the bunny is running from 34 to -34 you need to add those numbers up to get 68. You then need to divide 68 by 17.

68/17 = 4

So the bunny ran 68 units and the average speed is 4 units per minute

W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.

W is the set of all 3 x 2 matrices of the form [a,b; (a + b),0; 0,c]. It needs to be verified that W is a subspace of V, which has standard operations. Let us check whether W satisfies the three conditions to be a subspace of V or not:

Closure under addition: If X, Y are any two elements of W, then X + Y is also in

W.[a₁, b₁; (a₁ + b₁), 0; 0,c₁] + [a₂, b₂; (a₂ + b₂), 0; 0,c₂] = [a₁ + a₂, b₁ + b₂; (a₁ + b₁ + a₂ + b₂), 0; 0,c₁ + c₂]

The resulting matrix has the same form as W. So, W is closed under addition.

Closure under scalar multiplication: If X is any element of W and k is any scalar, then k

X is also in W.k[a, b; (a + b), 0; 0,c] = [ka, kb; k(a + b), 0; 0,kc]

This is of the same form as W. So, W is closed under scalar multiplication.

Contains zero vector: The zero vector is [0,0; 0,0; 0,0], which is of the same form as W. So, W contains the zero vector.

Therefore, W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.

To know more about subspace: https://brainly.com/question/29891018

#SPJ11

Answer:

Step-by-step explanation:

To solve this problem, we can use the formula for calculating simple interest:

I = P * r * t

where:

I = interest earned

P = principal (initial amount of money)

r = rate of interest

t = time (in years)

We can rearrange the formula to solve for the principal:

P = I / (r * t)

In this case, we know that Gill earned $2306 in interest after one year at a rate of 6%. So:

I = $2306

r = 0.06

t = 1 year

Substituting these values into the formula, we get:

P = $2306 / (0.06 * 1)

P = $38,433.33

Therefore, the initial amount of money that Gill deposited into her account was $38,433.33.

Answer:

During a 5 minute period, the minute hand moves 1 portion out of the 12 portions in a clock. Hence, the minute hand turns π6 radians during a 5 minute period.

The ramp will rise from the ground at its highest end to a height of approximately 8.56 inches. Rounded to the nearest hundredth of an inch, this is 8.56 inches.

Fiberboard is a type of engineered wood product that is made by combining wood fibers or other plant-based fibers with a binder or adhesive, and then compressing and heating the mixture to create a dense, flat panel

We can use trigonometry to solve this problem. Let's call the height of the ramp "h" and the length of the base "b". We want to find "h".

First, we need to find "b". We know that the fiberboard is 27 inches long, so the base of the ramp will be the length of the hypotenuse of a right triangle. Using trigonometry, we can find:

b = 27 * cos(19°) ≈ 25.68 inches

Next, we can use trigonometry again to find "h". We know that the angle of elevation from the ground is 19°, so the angle of depression from the ramp to the ground is also 19°. This means we have a right triangle with the height "h", the base "b", and an angle of 19°. Using trigonometry, we can find:

tan(19°) = h/b

Solving for "h", we get:

h = b * tan(19°) ≈ 8.56 inches

Therefore, the ramp will rise from the ground at its highest end to a height of approximately 8.56 inches. Rounded to the nearest hundredth of an inch, this is 8.56 inches.

To know more about fiberboard visit:

https://brainly.com/question/29157662

#SPJ1

The abiotic factor that can prevent the organism from becoming preserved, AFTER it has been buried is groundwater.

An abiotic factor refers to a non-living component of an ecosystem that influences the survival and growth of living organisms.

Groundwater can cause the dissolution of minerals present in the sediment that encases the buried organism.

This process can lead to the destruction of the fossilized remains, as the minerals provide the framework for the preservation of the organism's hard parts (such as bones or shells).

Groundwater can also cause the erosion of the sediment, which can expose the buried remains and make them vulnerable to biotic factors such as scavengers, predators, and decomposers.

Predators and animals that eat bones, scavengers and plants that use the nutrients of fossils, and other animals of the same species as the organism that died are all biotic factors that can affect the preservation of the organism, but they do so before or during the burial process.

Learn more about abiotic factors on:

brainly.com/question/21333046

#SPJ1

Regardless of the appearance of the normal distribution or the size of the standard deviation, approximately less than 2.98% of observations consistently fall within two deviations types (one high and one low).

The normal distribution, also known as the Gaussian distribution, is a probability distribution symmetrical about the mean, indicating that data near the mean occurs more frequently than data far from the mean. In graphical form, the normal distribution is represented by a "bell curve".

The normal distribution is important in statistics and is often used in the natural and social sciences to represent real-valued random variables whose distribution is unknown. Their importance is partly due to the central limit theorem. It states that in some cases the mean of many samples (observations) of a random variable with finite mean and variance is itself a random variable - whose distribution converges to a normal distribution as the size of the l sample increases. Therefore, physical quantities assumed to be the sum of many independent processes, such as measurement errors, tend to have a near-normal distribution.

Learn more about Normal Distribution:

https://brainly.com/question/29509087

#SPJ4

Answer:

C. The means of the data are different, but since they are more than twice the respective mean absolute deviations, the difference is not significant.

Step-by-step explanation:

Answer:

[tex]{ \rm{s = 12( v_{0} + v_{1} )t}} \\ \\{ \boxed { \rm{t = \frac{s}{12(v_{0} + v_{1})} \: \: }}}[/tex]

(a) The probability that the series will last exactly m games is:(1 - (pA + pB))^m(pA (1 - pB) + pB (1 - pA))where pA and pB are the probabilities of teams A and B, respectively. Therefore, the probability that the series will last less than 5 games is the probability that the series will last exactly 3 games or exactly 4 games:1 - (1 - 0.6 * 0.4)^3 - (1 - 0.6 * 0.4)^4 ≈ 0.684.

The probability that the series will last 5 games is the probability that the first four games have two wins for each team, and the last game is won by Team A:0.6^3 * 0.4^3 * 4 ≈ 0.055.The probability that the series will last 6 games is the probability that the first five games have two wins for each team, and the last game is won by Team A:0.6^3 * 0.4^3 * 5 ≈ 0.077The probability that the series will last 7 games is the probability that the first six games have two wins for each team, and the last game is won by Team A:0.6^3 * 0.4^3 * 6 ≈ 0.091.

The expected number of games played is thus approximately:0.684 * 4 + 0.055 * 5 + 0.077 * 6 + 0.091 * 7 + ∑m=8^∞ (1 - (pA + pB))^m(m + 1)(pA (1 - pB) + pB (1 - pA))The sum above can be computed by expressing it as the product of three factors:1 - (pA + pB) is a common factor for all terms, (pA (1 - pB) + pB (1 - pA)) is a sum of two terms that can be replaced by 1 - (1 - pA)(1 - pB), and m + 1 is a sum of m and 1. After replacing the sum of two terms, we obtain:0.684 * 4 + 0.055 * 5 + 0.077 * 6 + 0.091 * 7 + (1 - (0.6 + 0.4))^8(8 + 1)(1 - (1 - 0.6 * 0.4)^2) / (0.6 + 0.4 - 0.6 * 0.4) ≈ 0.684 * 4 + 0.055 * 5 + 0.077 * 6 + 0.091 * 7 + 0.02525 / 0.34 ≈ 5.43.

Therefore, the expected number of games played is approximately 5.43.(b) Given that Team B wins the first game, the series can last 7 or 8 games. The probability that the series will last 8 games is the probability that the first seven games have three wins for each team, and the last game is won by Team A:0.6^3 * 0.4^3 ≈ 0.013824.The probability that the series will last at least 8 games is therefore approximately 0.091 + 0.013824 = 0.104824, or 10.48%.Answer: (a) The expected number of games played is approximately 5.43. (b) The probability that the series will last at least 8 games is approximately 0.104824 or 10.48%.

Learn more about probability:

https://brainly.com/question/24756209

#SPJ11

Therefore , the solution of the given problem of function comes out to be he function's average rate of change over the range 3 x 4 is 4.

There will be questions on design, mathematics, each subject, and both real expression and imagined locations on the midterm exam. a list of the relationships between different elements that cooperate to create the same result. A service is composed of numerous distinctive components that cooperate to create distinctive results for each input. Every mailbox also has a specific address, which may be an enclave, a neighborhood.

Here,

Calculate the difference between the function values at

=> x = 4 and x = 3, then split by the difference in x-values,

which is 4 - 3 = 1, to determine the average rate of change of the function over the range 3  x  4.

We can see from the table that f(4) = -5 and f(3) = -9. As a result, the following function numbers are different:

=> f(4) - f(3) = (-5) - (-9) = 4

=> 4 - 3 = 1 represents the x-value disparity.

Therefore, the function's average rate of change over the period 3 x 4 is:

Average rate of change is equal to

=> (f(4)-f(3))/(4-3) = 4/1 = 4.

Consequently, the function's average rate of change over the range 3 x 4 is 4.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

To compute the 90% confidence interval for the population proportion, large a sample should you draw to ensure that the sample proportion does not deviate from the population proportion by more than 0.05, 271 is the minimum sample

A confidence interval is a range of values where an unknown population parameter lies. The level of confidence is the likelihood of the interval containing the parameter.

The formula to calculate the sample size required to produce a specific margin of error with a known level of confidence for the estimation of a population proportion is given below: 95% confidence interval for population proportion using a sample size formula

[tex]\[n=\frac{z^{2}p(1-p)}{E^{2}}\][/tex]

Where

[tex]\[z\][/tex] is the z-score The formula is modified to calculate the sample size required to produce a specific margin of error with a known level of confidence as follows:

[tex]\[n=\frac{z^{2}}{4E^{2}}\][/tex]

Note: For this problem, the sample size needs to be large enough to ensure that the sample proportion does not deviate from the population proportion by more than 0.05.

Using a Z-score Table, the z-value that corresponds to 90% confidence interval is 1.645.

[tex]n=\frac{z^{2}}{4E^{2}}\ = \frac{1.645^{2}}{4(0.05)^{2}} = \frac{2.706225}{0.0100} = 270.6[/tex]

(rounded up to the next highest integer)Therefore, 271 is the minimum sample size required to compute a 90% confidence interval for the population proportion.

See more about sample size at: https://brainly.com/question/28583871

#SPJ11

[tex]f(x) = -2(x - 0.5)^2 + 6[/tex] is the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8).

What is quadratic function?

f(x) = ax2 + bx + c, where a, b, and c are numbers with a not equal to zero, is a quadratic function.

To find the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8), we can use the vertex form of the quadratic function, which is:

[tex]f(x) = a(x - h)^2 + k[/tex]

[tex]f(1) = a(1 - h)^2 + k\\\\6 = a(1 - h)^2 + k[/tex]

We can use a second point to find a relationship between h and k. Let's use the point (0, 8):

[tex]f(0) = a(0 - h)^2 + k\\\\8 = a(-h)^2 + k\\\\6 - 8 = a(1 - h)^2 + k - (a(-h)^2 + k)\\\\-2 = a(1 - h)^2 - a(h)^2\\\\-2 = a(1 - 2h + h^2) - a(h^2)\\\\-2 = a - 2ah + ah^2 - ah^2\\\\-2 = a - 2ah\\\\a = -2/(2h - 1)[/tex]

Let's use the second equation:

[tex]8 = a(-h)^2 + k\\\\8 = (-2/(2h - 1))(h^2) + k\\\\8(2h - 1) = -2h^2 + k(2h - 1)\\\\16h - 8 = -2h^2 + k(2h - 1)\\\\-2h^2 + 16h - 8 = k(2h - 1)\\\\k = (-2h^2 + 16h - 8)/(2h - 1)[/tex]

Now we can substitute this value of h into our expressions for a and k to get:

[tex]a = -2/(2(0.5) - 1) = -2\\\\k = (-2(0.5)^2 + 16(0.5) - 8)/(2(0.5) - 1) = 6[/tex]

So the equation of the quadratic function is:

[tex]f(x) = -2(x - 0.5)^2 + 6[/tex]

Therefore, [tex]f(x) = -2(x - 0.5)^2 + 6[/tex] is the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8).

To know more about quadratic function visit,

https://brainly.com/question/25841119

#SPJ1

The required ratio of the surface area of the given pyramids is (A) 3:2.

A ratio can be used to show a relationship or to compare two numbers of the same type.

To compare things of the same type, ratios are utilized.

We might use a ratio, for example, to compare the proportion of boys to girls in your class.

If b is not equal to 0, an ordered pair of numbers a and b, denoted as a / b, is a ratio.

A proportion is an equation that equalizes two ratios.

For illustration, the ratio may be expressed as follows: 1: 3 in the case of 1 boy and 3 girls (for every one boy there are 3 girls)

So, the given surface area is:

- 21 in

- 14 in

Now, calculate the ratio as:

= 21/14

= 3/2

= 3:2

Therefore, the required ratio of the surface area of the given pyramids is (A) 3:2.

Know more about ratios here:

https://brainly.com/question/2328454

#SPJ1

Answer:

7.44

Step-by-step explanation:

?

The expected value of x is 1.80, the variance is 0.72, and the standard deviation is 0.85.

Calculate the expected value, variance, and standard deviation of the random variable x as follows. Round all answers to two decimal places, and keep in mind that x is the number of red marbles that Suzan has in her hand after selecting three marbles from a bag containing three red marbles and two green ones.

Expected Value: Since there are 3 red marbles and 2 green marbles in the bag, the probability of drawing a red marble is: P(R) = 3/5The probability of drawing a green marble is P(G) = 2/5Therefore, the expected value of the random variable X is: E(X) = μ = np = 3/5 * 3 = 1.80

Variance can be calculated using the following formula: Var(X) = npq, where p is the probability of success and q is the probability of failure of the event. In this scenario, the probability of drawing a red marble is P(R) = 3/5, and the probability of drawing a green marble is P(G) = 2/5.

Therefore, Var(X) = npq Var(X) = (3/5)*(2/5)*3Var(X) = 1.80 * 0.4Var(X) = 0.72Standard Deviation: The square root of the variance is equal to the standard deviation. Hence, the formula for standard deviation is: S.D. = √Var(X)S.D. = √0.72S.D. = 0.85

Learn more about Standard deviation

brainly.com/question/23907081

#SPJ11

The density function of the continuous random variable X, the total number of hours, in units of 100 hours, that a family runs a vacuum cleaner over a period of one year, is given in Exercise 3.7 on page 92 as f(x) = {x, 0 < x < 1, 2 - x, 1 ≤ x ≤ 2, 0, elsewhere.

To find the average number of hours per year that families run their vacuum cleaners, we must calculate the expected value of X. This is done by integrating the density function of X over the given range:

E(X) = ∫0,2 x * f(x) dx
      = ∫0,1 x2 dx + ∫1,2 (2-x) x dx
      = (1/3) + (-2 + 4 - 2/3)
      = 8/3

Therefore, the average number of hours per year that families run their vacuum cleaners is 8/3, or approximately 2.67 hours.

To find the proportion of individuals who can be expected to respond to a certain mail-order solicitation if X has the density function, we must calculate the cumulative density function of X. This is done by integrating the density function of X over the given range:

F(X) = ∫0,x f(x) dx
      = ∫0,x x dx + ∫x,2 (2-x) dx
      = (1/2)x2 + 2x - 2

Therefore, the proportion of individuals who can be expected to respond to a certain mail-order solicitation if X has the density function is (1/2)x2 + 2x - 2.

#SPJ11

Learn more about density function and random variables at: https://brainly.com/question/30717978

1 2/5, 1 3/4, 1 7/10 from least to greatest is 1 2/5, 1 7/10, 1 3/4

This is because when you convert these fractions to decimals you get 1.4, 1.75, and 1.7. which can easily be organized

The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Learn more about Percentage

brainly.com/question/2155156

#SPJ11

Answer:

the maximum height is 2 meters

As per the GDP, the percentage did the price level rise between 2016 and ​2019 is 27.5%

To calculate the percentage increase in production, we first need to find the nominal GDP for each year. Nominal GDP is the current dollar value of all goods and services produced within a country's borders during a specified period of time. We can use the GDP deflator and real GDP to calculate nominal GDP as follows:

Nominal GDP = Real GDP x GDP deflator

Using the information provided in the question, we can calculate the nominal GDP for each year as follows:

Nominal GDP in 2016 = Real GDP in 2016 x GDP deflator in 2016

Nominal GDP in 2019 = Real GDP in 2019 x GDP deflator in 2019

Once we have the nominal GDP for each year, we can calculate the percentage increase in production as follows:

Percentage increase in production = (Nominal GDP in 2019 - Nominal GDP in 2016) / Nominal GDP in 2016 x 100% = 27.5%

To know more about GDP here

https://brainly.com/question/30737857

#SPJ4

The answer is 58 days.

How to determine number of days between months?

You must take the start date and finish date and subtract them to find the number of days between the two dates. You should determine how many full years are involved if this spans multiple years.

To determine the number of days between June 27 and August 30, we can count the number of days in each of the months of July and August and add them up.

July has 31 days, and August has 30 days. Therefore, the total number of days between June 27 and August 30 is:

31 days (in July) + 30 days (in August) - 3 days (from June 27 to June 30) = 58 days

So, the answer is 58 days.

To know more about days between months visit,

https://brainly.com/question/28553287

#SPJ1

The maximum sum of the products taken two at a time is 180, and this can be achieved by choosing 60, 60, and 60 as the three numbers.

In order to write the number 180 as a sum of three numbers so that the sum of the products taken two at a time is a maximum, one way to do it is to use the formula:

[tex](x + y + z)^2 = x^2 + y^2 + z^2 + 2(xy + xz + yz)[/tex]

Let the three numbers be x, y, and z.

Then the product of the numbers taken two at a time is: [tex]xy + xz + yz[/tex]

If we want to maximize the sum of the products taken two at a time, we need to maximize [tex]xy + xz + yz[/tex].

In the formula: [tex](x + y + z)^2 = x^2 + y^2 + z^2 + 2(xy + xz + yz)[/tex]

We can see that the first three terms on the right-hand side are fixed since they depend on x, y, and z. Therefore, to maximize the sum of the products taken two at a time, we need to maximize 2(xy + xz + yz). Since we have the number 180, we can let: [tex]x + y + z = 180[/tex]

Then, we need to maximize: 2(xy + xz + yz) Using calculus, we can find that the maximum value of 2(xy + xz + yz) is attained when: [tex]x = y = z = 60[/tex]

Therefore, the three numbers that can be used to write the number 180 as a sum of three numbers so that the sum of the products taken two at a time is a maximum are: 60, 60, 60.

Learn more about sum of the products here:

https://brainly.com/question/25520277

#SPJ11

Answer:

We see that each fraction is in simplest form, and they add up to 1, so this confirms that 168 is the highest number of similar bouquets that Fatima can make without having any flowers left over.

Step-by-step explanation:

Yeah, I guess what that person said ^^ ??

The 21 square root of 98 divided by 7 square root of 21 = 21√98 / 7√21 = 6.4807407

A square root of a number x is a number y such that y2 = x; in other words, a number y who's square and the result of multiplying the number by itself, or y ⋅ y, is x.

Every nonnegative real number x has a unique nonnegative square root, called the principal square root, which is denoted by √where the symbol √ is called the radical sign.

Every positive number x has two square roots: √ which is positive, and -√ which is negative. The two roots can be written more concisely using the ± although the principal square root of a positive number is only one of its two square roots, the designation "the square root" is often used to refer to the principal square root.

To learn more about square root, click here:

brainly.com/question/29286039

#SPJ4

Answer:

5 cm

Step-by-step explanation:

Opposite sides are equal in a rectangle.

So, Area of missing length = 16-11 = 5 cm

8am : -14F

noon : -14+10  = -4F

increase between noon and 4 is 2*10 =20

4 pm: -4F + 20 = 16F

temperature at 4 pm is 16F

(a) Point estimate (mean difference): 2.2 tomatoes. (b) The standard deviation of differences: Approximately 3.47. (c) The test statistic: Approximately 1.38.

To perform a t-test for the population mean difference, follow these steps:

(a) Calculate the point estimate (mean difference): The point estimate is the mean difference between the yields of fertilizer A and fertilizer B.

Mean difference = (Sum of differences) / Number of pairs

Using the given data gives:

Mean difference = ((7-4) + (6-7) + (5-6) + (8-5) + (10-3)) / 5

Subtracting gives:

Mean difference = (3 - 1 - 1 + 3 + 7) / 5

Solving gives:

Mean difference = 11 / 5

Dividing gives:

Mean difference = 2.2

(b) Calculate the standard deviation of the differences:

To calculate the standard deviation of the differences, we need to calculate the squared differences, find their sum, divide by (n-1), and then take the square root.

Squared differences:[tex](3 - 2.2)^2, (-1 - 2.2)^2, (-1 - 2.2)^2, (3 - 2.2)^2, (7 - 2.2)^2[/tex]

Solving gives:

Sum of squared differences = (0.64 + 12.96 + 12.96 + 0.64 + 21.16)

Solving gives:

The sum of squared differences = 48.36

The standard deviation of the differences [tex]= \sqrt{48.36 / 4}[/tex]

Solving gives:

The standard deviation of the differences [tex]= \sqrt{2.09}[/tex]

Rounded to three decimal places

The standard deviation of the differences ≈ 3.47

c) Calculate the test statistic:

The test statistic (t) = (Point estimate - Null hypothesis value) / (Standard deviation /√(sample size))

Let's assume the null hypothesis is that there is no difference between the two fertilizers

(i.e., mean difference = 0).

[tex]t = (2.2 - 0) / (3.47 / \sqrt5)[/tex]

Substituting [tex]\sqrt 5 = 2.236[/tex]

t = 2.2 / (3.47 / 2.236)

Rounded to two decimal places

t ≈ 1.378

So, the test statistic is approximately 1.378.

The gardener can compare this test statistic to critical values from the t-distribution to determine whether the difference between the two fertilizers is statistically significant at a certain significance level. If the calculated test statistic is greater than the critical value, she ma

Learn more about t-tests here:

https://brainly.com/question/1189751

#SPJ12

​

The area of the base of the prism is 7-½ cm³/h cm².

Area is two-dimensional space defined by a boundary. It is measured in square units, such as square feet, square meters, and acres. Area can be used to measure the size of a shape, such as a circle or a triangle, or the size of a piece of land. It can be used to calculate the area of a room or the area of a city. Area is an important concept in mathematics, and can be used in a variety of applications, from construction to engineering.

The volume of a right rectangular prism is the product of its length, width, and height. In this case, the prism has a volume of 7-½ cm³, so the equation for calculating its area of base is 7-½ cm³ = lwh. Since the height of the prism is not given, we can solve for it by dividing both sides of the equation by lw, resulting in the equation: 7-½ cm³/lw = h. The area of the base of the prism is then lw, which can be calculated by multiplying both sides of the equation by lw, resulting in lw = 7-½ cm³/h. Therefore, the area of the base of the prism is 7-½ cm³/h cm².

To know more about area click-
https://brainly.com/question/28012687
#SPJ1

The area of the base of the prism is 92/cm².

Area is two-dimensional space defined by a boundary. It is measured in square units, such as square feet, square meters, and acres. Area can be used to measure the size of a shape, such as a circle or a triangle, or the size of a piece of land. It can be used to calculate the area of a room or the area of a city. Area is an important concept in mathematics, and can be used in a variety of applications, from construction to engineering.

To find the area of the base of a right rectangular prism, we need to know two of its dimensions, such as the length and width. Since we only know the volume, we can use the formula V = lwh to solve for the unknown dimension.

We can rearrange this equation to solve for either the length or the width:

V = lwh
l = V/wh

or

V = lwh
w = V/lh

Since we know the volume (7-½ cm³) and the height (h) of the prism, we can use the formula V = lwh to solve for the length (l) or the width (w).

For example, if we solve for the length, we can substitute the known values into the equation:

l = V/wh
l = 7-½ cm³/wh

Since the height (h) is unknown, we can solve for it
by rearranging the equation:

7-½ cm³/l = wh
h = 7-½ cm³/wl

Now that we know the length (l) and the height (h), we can use the formula for the area of a rectangle to find the area of the base of the prism:

A = lw
A = l(7-½ cm³/wl)
A = (7-½ cm³/l)²
A = 92/cm²

Therefore, the area of the base of the prism is 92/cm².


To know more about area click-
brainly.com/question/28012687
#SPJ1

Answer: 1. Here is a sketch of the overlapping triangles ΔEBT and ΔELH:

         H

        /|

       / |

      /  |

     /   |

    / θ  |

   /____|L

       E

       |

       |

       |

       |

       T

       |

       |

       |

       |

       B

2. ΔEBT~ΔELH because they have the same shape (both are right triangles with angle θ in common) and their corresponding sides are proportional. Specifically, angle θ is shared by both triangles, angle EBT is a right angle, and angle ELH is a right angle. Therefore, by the Angle-Angle Similarity Theorem, the two triangles are similar. Corresponding sides are proportional because EB/EL = BT/LH (by definition of similar triangles).

3. We are given that BT (the length of the thumb) is about 2 inches. We are also told that the distance from the eye to the landmark (EL) is unknown, but that the distance from the eye to the thumb (EB) is 10 inches (estimated by the person). We are given that LH (the height of the landmark) is 604 feet, or 604*12=7248 inches (since there are 12 inches in a foot). Therefore, we can label the diagram as follows:

         7248

        /|

       / |

      /  | EL

     /   |

    / θ  |

   /____|L

       E

       |10

       |

       |

       |

       T

       | 2

       |

       |

       |

       |

       B

4. To solve for EL, we use the fact that the triangles are similar: EB/EL = BT/LH. Substituting in the known values, we get:

10/EL = 2/7248

5. Multiplying both sides by EL and dividing both sides by 2, we get:

EL = 7248*5 = 36240 inches

Therefore, the distance from the eye to the landmark is 36240/12 = 3020 feet (rounded to the nearest foot).

Step-by-step explanation: