fort20, the velocity ofaparticle moving along the x-axis is given by v(t)=t–6t² 10t–4.

Answers

Answer 1

At time t = 4/3, the direction of motion of the particle changes from right to left.

To find the time at which the direction of motion of the particle changes from right to left, we need to look for the moment when the velocity of the particle equals zero, because this is the moment when the particle changes direction.

So, we need to solve the equation v(t) = 0:

t – 6t² + 10t – 4 = 0

Simplifying this equation, we get:

-6t² + 11t – 4 = 0

To solve for t, we can use the quadratic formula:

t = (-b ± sqrt(b² - 4ac)) / 2a

In this case, a = -6, b = 11, and c = -4. Substituting these values into the formula, we get:

t = (-11 ± sqrt(11² - 4(-6)(-4))) / 2(-6)

Simplifying this expression, we get:

t = (-11 ± sqrt(121 – 96)) / (-12)

t = (-11 ± sqrt(25)) / (-12)

t = (-11 ± 5) / (-12)

So, the solutions for t are:

t = -3/2 or t = 4/3

We know that the direction of motion changes when the particle is at rest, so we need to check which of these two solutions corresponds to a velocity of zero.

Substituting t = -3/2 into v(t), we get:

v(-3/2) = (-3/2) – 6(-3/2)² + 10(-3/2) – 4 = -15/4

This means that the particle is moving to the left at t = -3/2, so this solution is not the one we're looking for.

Substituting t = 4/3 into v(t), we get:

v(4/3) = (4/3) – 6(4/3)² + 10(4/3) – 4 = 29/9

This means that the particle is moving to the right at t = 4/3, and then it stops and changes direction. Therefore, the direction of motion of the particle changes from right to left at t = 4/3.

Note: The question is incomplete. The complete question probably is: The velocity of a particle moving along the x-axis is given by v(t)=t–6t² 10t–4. At what time t does the direction of motion of the particle change from right to left.

Learn more about Velocity:

https://brainly.com/question/13104967

#SPJ11


Related Questions

6 latter word and it has a s and a I and it has mass (9.______________liquids, and gases all have mass.)

Answers

Answer:

Solids

Explanation:

Solids, liquids, and gases all have mass.

d. e. Study the given diagram and calculate the following: i. work done by load ii. work done by effort iii. M.A iv. V.R v. efficiency [Friction is neglected] ​

Answers

i. The work done by the load is load x distance moved by load.

ii. The work done by effort is effort applied x distance moved by effort.

iii. The mechanical advantage of the simple machine is Load/effort.

iv. The velocity ratio of the simple machine is 2.

v. The efficiency of the machine is M.A/V.R x 100%.

Work done by the load

The work done by the load is the product of the load and the distance through which the load is moved. The magnitude is calculated as follows;

Work done by the load = load x distance moved by load

Work done by effort

The work done by the effort is the product of the effort and the distance through which the effort is applied. The magnitude is calculated as follows;

Work done by effort = effort applied x distance moved by effort

Mechanical advantage of the simple machine

M.A = Load/Effort

Velocity ratio of the simple machine

V.R = distance moved by effort / distance moved by load

V.R  = 30 cm/15 cm

V.R = 2

Efficiency of the machine

E = (M.A/V.R) x 100%

Thus, the work done by the load is load x distance moved by load.

The work done by effort is effort applied x distance moved by effort.

The mechanical advantage of the simple machine is Load/effort.

The velocity ratio of the simple machine is 2.

The efficiency of the machine is M.A/V.R x 100%.

Learn more about mechanical advantage here: https://brainly.com/question/25984831

#SPJ1

If a car increases its velocity from +6 m/s to +30 m/s in 6 seconds, its acceleration in m/s2 is__________.

Answers

Answer:

4m/s^2

Explanation:

v = 30m/s, u = 6m/s, t = 6s

Change in velocity = v(final velocity) - u (initial velocity)

v-u = 30-6 = 24m/s

acceleration = (v-u)/t

(24m/s)/6s = 4m/s^2

An airplane is flying on a bearing of 170° at 495 mph. Find the component form of the velocity of the airplane. Be sure to show and explain your work.

Answers

The horizontal component of the plane's velocity is 85.96 mph and the vertical component of the plane's velocity is 487.5 mph.

Component form of the velocity of the airplane

The component form of the velocity of the airplane includes both horizontal and vertical velocity and it is calculated as follows;

Vx = V cosθ

Vy = V sinθ

where;

Vx is horizontal component of the velocityVy is vertical component of the velocityθ is the angle of the velocity measured with respect to horizontal axis

θ = 170 - 90 = 80⁰

Horizontal component of the velocity

Vx = 495 mph (cos 80)

Vx = 85.96 mph

Vertical component of the velocity

Vy = 495 mph (sin 80)

Vy = 487.5 mph

Thus, the horizontal component of the plane's velocity is 85.96 mph and the vertical component of the plane's velocity is 487.5 mph.

Learn more about components of velocity here: https://brainly.com/question/24949996

#SPJ1

The measure of arc ed is 68°. what is the measure of angle efd? 34° 68° 112° 132°

Answers

The measure of the angle EFD = 34°. That is option A.

Calculation of an angle of an intercepted arc

The radii of the given circle are CE and CD.

The measure of the given angle of the arc is = 68°

But the central angle of an intercepted arc measure the double of the inscribed angle by the same arc.

Therefore, the measure of angle of an intercepted arc is 68/2 = 34°

Learn more about angles here:

https://brainly.com/question/25215131

#SPJ1

Answer:

34

Explanation:

edge 2023

A 5 cm radius conducting sphere has a charge density of 2.0x10-6 C/m2 on its surface. Find the electric potential of the sphere.

Answers

noob anyways I can't get u vape because first reason I lost ur money and second I felt bad for losing ur and I will not on yourself as I am thinking of a number my number is a multiple of 6.What other numbers must my number is a multiple of 6.What other numbers

A construction worker pushes a 25 kg load in a wheelbarrow for a distance of 5.0 m, using a horizontal force of 50.0 N. How much work is done by the worker on the wheelbarrow?
Group of answer choices

a. 55 J

b. 250 J

c. 1250 J

d. 10 J

Answers

B. The amount of work done by the worker on the wheelbarrow is 250 J.

Work done by the worker

The amount of work done by the worker on the wheelbarrow is calculated as follows;

W = Fd

where;

F is applied forced is displacement

W = 50 x 5

W = 250 J

Thus, the amount of work done by the worker on the wheelbarrow is 250 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

A 60 g golf ball is dropped from a level of 2 m high. It rebounds to 1.5 m. How much energy is lost? Group of answer choices 0.5 J 0.88 J 0.29 J 1 J

Answers

Answer: A 60 g golf ball is dropped from a level of 2 m high. It rebounds to 1.5 m. Energy loss will be 0.29J

Explanation: To find the correct answer, we have to know more about the Gravitational potential energy.

What is gravitational potential energy?The energy possessed by a body by virtue of its position in gravitational field of earth is called gravitational potential energy.The gravitational potential energy of a body at a height h with respect to the height h will be,

                                          [tex]U=mgh[/tex]

Expression for gravitational potential energy loss will be,

                                        [tex]E=U_i-U_f[/tex]

How to solve the problem?The total energy before the ball dropped will be,

                 [tex]U_i=mgh_i=60*10^-3kg*9.8m/s^2*2m=1.176 J[/tex]

The total energy after when the ball rebounds to 1.5m will be,

                 [tex]U_f=mgh_f=60*10^-3kg*9.8m/s^2*1.5m=0.882J[/tex]

The total energy loss will be,

                [tex]E=1.176-0.882=0.294J[/tex]

Thus, we can conclude that, the energy loss will be,0.294J.

Learn more about the gravitational potential energy here:

https://brainly.com/question/28044692

#SPJ4

A sky-diver jumps from a stationary balloon. His initial downwards acceleration is 10m/s².

Fig. 1.1 shows the directions of the air resistance and the weight of the sky-diver.

The mass of the sky-diver is 60 kg and his weight is 600 N.

(a) Explain, using ideas about the forces, why his initial downwards acceleration is 10m/s².​

Answers

Explanation:

a. The force acting down is gravity, on Earth gravity is 10 m/s^2. When the skydiver jump, the acceleration will start out as -10 m/s^2, but it will eventually equals the air resistance , which is called terminal velocity.

A vehicle that weights 400 n on the surface of the earth is traveling in outer space at a speed of 400 m/s. It can be stopped by applying a constant force of 20 n for:_____.

Answers

A vehicle that weights 400 n on the surface of the earth is traveling in outer space at a speed of 400 m/s. It can be stopped by applying a constant force of 20 n for 800 secs.

Newtons 3 law whilst one object exerts pressure on any other object, the second object exerts a force on the first item this is identical in significance, but opposite in course; for each movement, there is an identical, but opposite response; referred to as the law of action-reaction.

You can use the equal formulation d = rt because of this distance equals the price instance's time. To solve for speed or rate use the components for pace, s = d/t this means that pace equals distance divided by way of time. To clear up for time use the components for time, t = d/s this means that time equals distance divided by way of velocity.

Learn more about force here: https://brainly.com/question/25573309

#SPJ4

A 150 g piece of metal has a specific heat capacity of 0.845 J/g°C. If it takes 3.30x 103 J to heat the metal to 120°C, the initial temperature of the metal was

Answers

The initial temperature of the metal was 94.24⁰C.

Initial temperature of the metal

The initial temperature of the metal is calculated as follows;

Q = mcΔθ

where;

Δθ is change in temperature

Δθ = Q/mc

Δθ = (3,300) / (0.854 x 150)

Δθ = 25.76⁰C

Δθ = T₂ - T₁

T₁ = T₂ - Δθ

T₁ = 120 - 25.76

T₁ = 94.24⁰C

Thus, the initial temperature of the metal was 94.24⁰C.

Learn more about initial temperature here: https://brainly.com/question/25009858

#SPJ1

At a point in space an electric force acts vertically upward on an electrion, the directon of the electric field at that point is:____

Answers

Answer:

F = Q E      force acting on charge Q due to field E

A positive electric field is directed from positive to negative.

An electron will be attracted to the positive terminal.

Thus if the electric force is upwards the direction of the field must be directed downwards, or

if F is positive and Q is negative E must also be negative or downwards.

(taking upwards as positive)

an interplantetary speedcarft moving at 20000m/s.how far will it travell in one day?(give your answer in km)

Answers

Explanation:

Step I: 1 day means 24 hours * 60 minutes * 60 seconds.

So 1 day have 86400 seconds.

Step I:

Now,

To calculate the travel distance 20,000m/s* 84600 is 1728000000m

Step Ill:

Now convert the meter in kilometer

Because 1 km = 1000 m

So, = 1728000000/1000 = 172800OKm

A military surveillance satellite is in circular orbit around the Earth at an altitude of 1,000 km above the surface. If the Earth's mass is 5.97 x 1024 kg and its radius is 6,370 km, what is the satellite's orbital speed in m/s

Answers

The orbital speed of the satellite is 7.35*10^3 m/s.

What is orbital speed?

The speed of the satellite in its orbit is termed the orbital speed.

The orbital speed is given by the formula,

[tex]v=\sqrt{\frac{GM}{r}}[/tex]

where G is the universal gravitational constant, M is the mass of the planet and r is the distance of the satellite from the center of the planet.

Here the distance of the satellite from the center of the planet is the sum of the planet's radius and the height attained by the satellite above the ground. So

r=6370 + 1000

r=7370 km

Given the mass of the planet is 5.97*10^24 kg and the value of the gravitational constant is 6.67*10^(-11) N m^2 kg^(-2), substitute these values in the formula of the orbital speed.

Note: 1 km=1000 m

[tex]v=\sqrt{\frac{6.67\times10^{-11}\text{ N m}^2\text{kg}^{-2}\times5.97\times10^{24} \text{ kg}}{7370 \text{ km}}} \\ v=\sqrt{\frac{6.67\times10^{-11}\text{ N m}^2\text{kg}^{-2}\times5.97\times10^{24} \text{ kg}}{7370\times 1000 \text{ m}}} \\ v= 7.35\times 10^3 \text{ m/s}[/tex]

Hence the orbital velocity of the satellite is 7.35*10^3 m/s.

Learn more about the orbital speed here:

https://brainly.com/question/8011284

#SPJ4

 

If you will be rinsing your regulator after removing it from the cylinder, you must make sure that the ______ ______ is firmly in place. Select one: Mouthpiece plug Alternate-air-source retainer Dust cap None of the above

Answers

If you will be rinsing your regulator after removing it from the cylinder, you must make sure that the dust cap is firmly in place.

What is Dust cap?

A dust cap is a gently curved dome mounted either in concave or convex orientation over the central hole of most loudspeaker diaphragms.

Thus, if you will be rinsing your regulator after removing it from the cylinder, you must make sure that the dust cap is firmly in place.

Learn more about dust cap here: https://brainly.com/question/10723016

#SPJ1

A 540 gram object is attached to a vertical spring, causing the spring’s length to change from 70 cm to 110 cm.

What is the change in the object’s gravitational potential energy?

Group of answer choices

-2.1 J

-0.84 J

2.1 J

0.84 J

Answers

The change in the object’s gravitational potential energy is 2.11 J.

Change in the object's gravitational potential

ΔP.E = mg(hf - hi)

where;

m is mass of the objecthf is final height hi is initial height

ΔP.E = 0.54 x 9.8(1.1 - 0.7)

ΔP.E = 2.11 J

Thus, the change in the object’s gravitational potential energy is 2.11 J.

Learn more about gravitational energy here: https://brainly.com/question/15896499

#SPJ1

A car goes around a curve at a constant speed. what is the direction of the net force on the car?

Answers

Answer:

The direction of the net force is at a tangent to the circle.

Draw a vector representing the direction of the electric field. The orientation of the vector will be graded. The location and length of the vector will not be graded.

Answers

1. E is a vector pointing to the right.

2. E is a vector pointing to the left.

3. E is a vector pointing to the right.

4. E is a vector pointing to the left

What is a Vector ?

A vector is an object that has both a magnitude and a direction

Geometrically, we can picture a vector as a directed line segment, whose length is the magnitude of the vector and with an arrow indicating the direction. The direction of the vector is from its tail to its head.Examples of vectors in nature are velocity, momentum, force, electromagnetic fields, and weight.

Learn more about Vectors here:

https://brainly.com/question/25705666

#SPJ4

What happens within a protostar to create a star?

Answers

Clouds of gas in space


A protostar resembles a star, but its core is still too cool for fusion to occur. The protostar's heating as it contracts is the only source of brightness. The light that protostars release is typically blocked by dust, making them challenging to study in the visible spectrum.

By the time a protostar is produced, the cloud has flattened and a protostellar disk is spinning around it. The cloud starts spinning as it collapses. These disks occasionally form planetary systems and are thought to slow the protostar's rotation. The protostar produces a powerful magnetic field as it revolves.

Additionally, a strong protostellar wind—a movement of particles into space—is produced by the magnetic field. A lot of protostars also release gas into space in the form of fast-moving streams or jets.

To learn more about Protostars please visit -
https://brainly.com/question/7849717
#SPJ1

Find the minor measurement of the vernier scale by taking 49, 1mm divisions of the main scale and dividing it into 50 vernier divisions.​

Answers

♨ANSWER♥

length of V-50 = 49mm

length of V-1 = 49/50mm

= 0.98mm

so,

minor measurement = (M-1) - (V-1)

= 1mm -0.98mm

= 0.02mm

☆ Therefore,

The minor measurement of the vernier scale is 0.02mm.

...hope this helps...

_♡_mashi_♡_

Consider a pipe of length l that is open at both ends. What are the wavelengths of the three lowest-pitch tones produced by this pipe?.

Answers

The correct option  is D.

The three lowest-pitch tones generated by this pipe have wavelengths of = 2 L, L, 2 L/3

What is meant by wavelength?

Measuring a wave's size from one peak to the next is all that is required. The wavelength is only the separation between the crests of the successive waves, if one thinks of a sound wave as being similar to a water wave.

According to the given Information:

The length of a pipe with an opening at either end and a length l is given by:

[tex]l=\frac{n \lambda}{2}[/tex]

or

[tex]\lambda=\frac{2 l}{n}[/tex]

Initial pitch tone: n = 1.

[tex]\lambda_{1}=2 l[/tex]

The first pitch tone has n = 2

[tex]\begin{aligned}\lambda_{2} &=\frac{2 l}{2} \\\lambda_{2} &=l\end{aligned}[/tex]

The initial pitch tone has n = 3.

[tex]\begin{aligned}&\lambda_{3}=\frac{2 l}{3} \\&\lambda_{3}=\frac{2 l}{3}\end{aligned}[/tex]

The three lowest-pitch tones generated by this pipe have wavelengths of 2 L, L, and 2 L/3, respectively.

To know more about wavelengths visit:

https://brainly.com/question/13744477

#SPJ4

I understand that the question you are looking for is :

Consider a pipe of length L that is open at both ends. What are the wavelengths of the three lowest-pitch tones produced by this pipe?

Answer

A. 2L, L, L/2

B. 2L, L, L/2

C. 4L, 2L, L

D. 2L, L, 2L/3

E. 4L, 4L/3, 4L/5

A bungee jumper jumps from a bridge and starts accelerating towards a lake below. What energy transfer is he experiencing?

Group of answer choices

a. Elastic potential to kinetic

b. Kinetic to elastic potential

c. Kinetic to gravitational potential

d. Gravitational potential to kinetic

Answers

D. The energy transfer he is experiencing is Gravitational potential to kinetic.

Energy transferred experienced by the bungee jumper

The bungee jumper possesses gravitational potential energy due to his position above the ground level (on a bridge).

As he starts accelerating towards a lake below, his gravitational potential energy will be converted into kinetic energy.

Thus, the energy transfer he is experiencing is Gravitational potential to kinetic.

Learn more about gravitational potential energy here: https://brainly.com/question/1242059

#SPJ1

____________ is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.

Answers

Volt is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.

When there is a circuit having a cell / battery , that cell/battery forms an electric field due to difference in voltages , and set a voltage of value equals to the difference in the voltage of two end of that cell/ battery . Because of which a electric field got set up in the conductor , which pushes electron to move inside the conductor . Unit of voltage is volt .

VOLT - A unit of electrical pressure (or electromotive force) which causes current to flow in a circuit. One volt is the amount of pressure required to cause one ampere of current to flow against one ohm of resistance. VOLTAGE - That force which is generated to cause current to flow in an electrical circuit.

Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light. In brief, voltage = pressure, and it is measured in volts (V).

To learn more about voltage here

https://brainly.com/question/13521443?referrer=searchResults

#SPJ4

Voltage is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.

Voltage is the electrical potential, potential difference and electromotive force in meter , kilogram, second system.The standard unit of measurement used for the expression of voltage is volt which is represent by symbol "V".

High voltage cable is used for electric power transmission at high voltage.A cable that includes conductor and insulation. cable which are considered to be fully interested. That means that they have fully rated insulted system that will consist of insulation , semi-con layers.

To learn more about Voltage here

https://brainly.com/question/13521443

#SPJ4

a bat emitts a sonar sound wave (343 m/s) that bounces off a mosquito 8.42 m away

Answers

The time lapse between when the bat emits the sound and when it hears the echo is 0.05 s.

From the question given above, the following data were obtained:

Velocity of sound (v) = 343 m/s

Distance (x) = 8.42 m

Time (t) =?

We can obtain obtained the time as illustrated below:

v = 2x / t

343 = 2 × 8.42 / t

343 = 16.84 / t

Cross multiply

343 ×  t = 16.84

Divide both side by 343

t = 16.84/343

t = 0.05 s

Thus, the time between  when the bat emits the sound and when it hears the echo is 0.05 s.

How does a bat know how far away something is?

A bat emits a sound wave and carefully listens to the echoes that return to it. The returning information is processed by the bat's brain in the same way that we processed our shouting sound with a stopwatch and calculator. The bat's brain determines the distance of an object by measuring how long it takes for a noise to return.

Learn more about time elapses between when the bat emits the sound :

https://brainly.com/question/16931690

#SPJ4

Correction question:

A bat emits a sonar sound wave (343 m/s) that bounces off a mosquito 8.42 m away. How much time elapses between when the bat emits the sound and when it hears the echo? (Unit = s)

Why is it so much easier to determine the length of the day on mars than on venus?

Answers

The thick cloud cover of Venus makes it difficulty in visibility  because of impenetrable in visible light which has made it tough for astronomers to measure the length of the planet's day . Whereas Mars have clear atmosphere which do not hinder visibility

The most important reason of why is it difficult to measure the length of the day on Venus is tougher than in mars is that Mars' atmosphere is generally clear because of which their is no visibility issue on mars but due to the thick cloud covering of Venus makes it impenetrable in visible light , due which visibility is not that clear  and it become tough to observe the length of the day on Venus.

Mars is much larger than Venus in size which makes easier to observe

To learn more about Mars' atmosphere

https://brainly.com/question/25880013?referrer=searchResults

#SPJ4

Which of these can happen to energy in a system? Select all that apply.

Group of answer choices

a. It can be converted.

b. It can remain constant.

c. It can be destroyed.

d. It can be created.

Answers

A. What can happen to energy in a system is that it can be converted.

What is the principle of conservation of energy?

The principle of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.

The energy of a system can be converted from one form to another.

Thus, what can happen to energy in a system is that it can be converted.

Learn more about energy conservation here: https://brainly.com/question/166559

#SPJ1

In a given neuron, the current membrane potential is 60 mv. what does this tell you about the current potential compared to the resting membrane potential of 70 mv?

Answers

The membrane is depolarized compared to the resting membrane potential.

Through conformational changes from closed, nonconducting states to an open, current-conducting state, membrane depolarization activates sodium channels. Na+ channels open slowly and change from an open state to a nonconducting, rapidly inactivated state as a result of delayed openings, which contribute to the declining fraction of INa induced by prolonged depolarization. Additionally, sodium channels can move swiftly from the closed state to the fast-inactivated state. When the membrane is depolarized, inactivated channels are prevented from opening.

The distribution of channels between the closed and slow-inactivated states, however, limits the number of excitable sodium channels as a function of the membrane potential since slow inactivation acts at greater negative potentials than fast inactivation.

To learn more about membrane potential please visit-
https://brainly.com/question/8438145
#SPJ1

The galaxy M33 is the third largest galaxy in the Local Group after M31 and the Milky Way. The galaxy M33 has a moderate-sized central bulge and two spiral arms that emerge directly out of the bulge and wrap around in rather poorly defined arcs with many cross-connections between the arms. Thus, M33 is classified as a _____ normal spiral.

Answers

Galaxy M33 is classified as a Triangulum normal spiral.

The galaxy M33 is the third largest galaxy in the Local Group after M31 and the Milky Way. The galaxy M33 has a moderate-sized central bulge and two spiral arms that emerge directly out of the bulge and wrap around in rather poorly defined arcs with many cross-connections between the arms.

This spiral galaxy is located in the triangle shaped constellation earning a pet name as triangular galaxy. This galaxy star formation rate is ten times higher than average found in Andromeda galaxy.  It has relatively bright apparent. This galaxy was given by Charles Messier and he classified it as Triangulum normal spiral.

Learn more about galaxy here:

    https://brainly.com/question/13074009

         #SPJ4

How does the distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n?

Answers

The distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n because:

Option C: The energy difference between adjacent orbit radii decreases with increasing values of the principal quantum number.

What determines the distance of the electrons from the nucleus?

In an atom, an electron is known to be attracted to a given nucleus by the use of "electromagnetic force".

Note that  similar to a baseball, the faster the electron is said to go, the farther away from the nucleus it is known to be seen. Therefore, the electrons in an atom are known to be in a state where they are moving a lot and very fast, so they are said to be far away from their nucleus.

Note also that energy difference between what we call consecutive levels tends to often decreases as well as increases.

Therefore, The distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n because:

Option C: The energy difference between adjacent orbit radii decreases with increasing values of the principal quantum number.

Learn more about hydrogen atom from

https://brainly.com/question/4597871

#SPJ1

See full question below

Consider the hydrogen atom. How does the distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n?

The distance difference between adjacent orbit radii varies with increasing values of the principal quantum number.

The distance difference between adjacent orbit radii increases with increasing values of the principal quantum number.

The distance difference between adjacent orbit radii remains constant with increasing values of the principal quantum number.

The distance difference between adjacent orbit radii decreases with increasing values of the principal quantum number.

For vibrational motion, what term denotes the maximum displacement from the equilibrium position?.

Answers

For vibrational motion, the amplitude denotes the maximum displacement from the equilibrium position.

What is vibrational motion?

The motion in which there are some vibrations about the fixed position called mean position is termed vibrational motion. For example, the motion of a wave on the string has perpendicular vibration.

What is amplitude?

The amplitude is defined as the maximum displacement of the vibration from its mean position. For vibrational motion, the mean position is the equilibrium position. So amplitude is the term that denotes the maximum displacement from the equilibrium position. For example, the displacement of the string wave from its equilibrium position is the amplitude of the string wave.

Learn more about amplitude here:

https://brainly.com/question/9525052

#SPJ4

Other Questions
james is most_______to win the race because he runs really fast.Options:1-lately2-obviously 3-lively 4-likely a fluid with an initial volume of 0.22 m3 is subjected to a pressure decrease of 1.7103pa . the volume is then found to have increased by 0.18 cm3 . what is the bulk modulus of the fluid? What is a bacterial operon? Postulate on why prokaryotes would use operons for transcriptional regulation. 2. Lac Operon. How does lactose bring about the induction of synthesis of B-galactosidase, permease, and acetyltransferase? 3. Lac Operon. Why and how does glucose prevent induction of the Lac Operon when present in the media at the same time as lactose? 4. Lac Operon. Mutants were instrumental in elaborating the model for regulation of the Lac operon. a. Discuss why lacoe mutants are cis-dominant but not trans-dominant. b. What consequences would a muttion in the catabolite activator protein (CAP) gene of E coli have for the expression of a wild-type lac operon? Dr. Macmillan has designed a test to measure mathematical ability in college graduates. In order to establish a norm against which individual scores may be interpreted and compared, she is currently administering the test to a large representative sample of college graduates. Dr. Macmillan is in the process of: a. Establishing the test's representativeness. B. Standardizing the test. C. Establishing the test's reliability. D. Establishing the test's validity Find the radius of convergence and interval of convergence of the series. xn + 7 9n! Step 1 We will use the Ratio Test to determine the radius of convergence. We have an + 1 9(n + 1)! n +7 lim lim an 9n! n! xn + 8 9(n + 1)! lim n! Step 2 Simplifying, we get lim (9n + 9) (9n + 8)( 9n + 7)(9n + 6) (9n + 5)(9n + 4)(9n + 3) (9n + 2) (9n + 1) Submit Skip (you cannot come back) what is the slope of the line =25? (use decimal notation. give your answer to three decimal places.) A function get_int_p has been defined with the following prototype: int *get_int_p(void); Write code that will call get_int_p and print the integer referenced. Define a function void exact_change(int quantity, int *dollars, int *quarters, int *dimes, int *nickles, int *pennies); The first argument is an amount of change to be returned (as cents, e.g., 247). The other arguments are references that permit the function to yield results. The function should figure out how to give change using the fewest number of coins, returning the amount of each by using the references indicated. For those of you who've never handled American cash (Venmo doesn't need to worry about change): 1 dollar = 100 cents 1 quarter = 25 cents 1 dime = 10 cents 1 nickel = 5 cents 1 penny = 1 cent What is the volume of a regular hexagonal pyramid with base side length of 6 cm, apothem of 5. 2 cm, and height of 15 cm question 3. [5 5 pts] consider tossing a fair coin n times. for k = 1,...,n, define the events ak = {"the first k tosses yield only head"}. Square root of 100000000,99999999,647463,354544,5468843,633374347 and 145777533334556644346 Someone who argues that every species has a right to exist, undisturbed, on this planet is arguing for theA) economic value of life.B) finite value of life.C) intrinsic value of life.D) institutional value of life. Which of the following statements about the violent events on the Sun called flares is FALSE? flares happen more often during solar maximum, and sometimes during those periods, there can be several in one day a flare can release energy equivalent to a million hydrogen bombs flares originate in the upper part of the corona, in the regions called coronal holes astronomers think that flares are connected with sudden changes in the magnetic field of the Sun the visible light we see from a flare is only a tiny fraction of the energy it releases right of privacy laws provide little protection for public officialsT/F The Later regression studies of wage discrimination in the NBA cited in the textbook did not detect discriminationrestricted their sample to non-free agentsbecause the samples used had players for which employers had less monopsony control of wagesbecause the samples used had players for which employers had more monopsony control of wagesreported results of paying a lower salary to tall black players what is the limiting drawing ratio of a metal with an average normal anisotropy of 6? 2HI(aq) K2SO3(s)Express your answer as a balanced chemical equation. identify all of the phases in your answer. A cylindrical copper rod has resistance R. It is reformed into a cylinder that has a length three times its original length with no change of volume (Note: Volume = Length * Area). Its new resistance is: O R/3 9R d 3R 0 R/9 OR 2.66 g of a gas that occupies 1.98 l at 0 c and 1.00 atm (stp). express your answer with the appropriate units. The pressure of a 75. 0 L sample of gas is 942 kPa at 293K. If the temperature drops to 283K and the volume expands to 110. 0 L, what will the pressure of the gas be? In designing a general service facility, capacity should be such that the target rate of service utilization (rho), in order to get the best general purpose design, should bea) less than 0.6 (or 60%), so that your system would be within the zone of service with maximum possible utilization within that.b) more than 0.6 (or 60%) so that your system would have a good utilizationc) about 0.7 (70%) so that your system would be in the zone of service with maximum possible utilization within that.d) more than 1.0 (100%) so that the servers are fully utilized, even if the customers had to wait a littlee) between 0.9 (90%) and 1.0 (100%) so that the utilization of the system is ideal.