Answer:
Explanation:
Entropy is the measure of randomness of a system . When heat is added to a gas , gas molecules become more random and therefore , their entropy increases . Hence at higher temperature , entropy increases and randomness increases due to addition of heat .
Hence when a gas molecules become more ordered that means entropy decreases . Hence heat is withdrawn from the system . Hence temperature of the system is decreases .
In the given case , gas molecules are made more ordered that means their temperature is decreased to lower the entropy before they are exhausted .
Which of the following is not an example of potential energy? Group of answer choices electrical energy, chemical energy, gravitational energy, elastic energy.
PLS HELP FAST
Answer: The one listed below that's NOT an example of potential energy is mechanical energy. Mechanical energy is categorized as a kinetic energy with light, sound, and thermal/heat energy.
HOPE THIS HELPS
The energy that a body possesses as a result of its position with relation to other bodies, internal tensions, electric charge, and other considerations . Mechanical energy is not an example of potential energy.
What is potential energy ?Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases.
Although a force must be applied to an object in order for it to store potential energy, potential energy is technically stored inside matter.
The potential energy must be released, despite the fact that the energy is held in the object's mass due to gravity or elastic forces.
Thus, Mechanical energy is not an example of potential energy.
To learn more about potential energy refer the link below;
https://brainly.com/question/24284560
#SPJ2
In NMR: The size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
1. True
2. False
Answer:
True
It is true that he size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
Explanation:
With the increase in the valence angle the coupling constant reduces. The distance between the carbon atoms also influence coupling constant. With increase in bond length, the coupling constant decreases. Also the more an atom is electronegative, the lesser is the coupling constant
Thus, it is true that he size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
5. The heat of fusion of lead is 25 J/g and its melting point is 601 K. How much heat is given off as 3.0 g
of liquid lead solidifies at 601 K?
Answer:
the heat given off is 75 J.
Explanation:
Given;
latent heat of fusion of lead, L= 25 J/g
mass of liquid lead, m = 3.0g
The heat given off is calculated as;
H = Lm
Where;
H is the quantity of heat given off
H = 25 x 3
H = 75 J.
Therefore, the heat given off is 75 J.
Vitamin C is a covalent compound with the molecular
formula C6H8O6. The recommended daily dietary
allowance of vitamin C for children aged 4-8 years is
0.000142mol. What is the mass of this allowance in grams?
The mass allowance of Vitamin C for children aged 4-8 years is equal to 0.025 grams.
What is a mole?A mole can be defined as a standard unit that can be utilized to evaluate the number of entities such as atoms, molecules, ions, or other particular particles in a particular amount of the substance.
The number of elementary entities present in one mole of any chemical substance was found to be equal to 6.023 × 10²³ which is also known as the Avogadro number.
Given, the number of moles of vitamin C = 0.000142 moles
Given, the molecular formula of Vitamin C is C₆H₈O₆.
The mass of one mole of C₆H₈O₆ = 176 g
One mole of Vitamin C has mass = 176 g
0.000142 mol of Vitamin C has mass = 0.000142×176 = 0.025 g
Therefore, the mass of 0.000142 mol of Vitamin C is 0.025 g.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
explain the 3 ways the elements were formed and which elements were formed in each method. (Big Bang, Stellar, And Supernova Nucleosynthesis)
Answer:
See explanation
Explanation:
Big Bang: During the big bang, elements were formed by the squeezing together of light nuclei. Hydrogen atoms were fused together to make helium, lithium and other light weight elements.
Stellar Nucleosynthesis: Stellar nucleosynthesis is the process by which elements are created within stars by combining the protons and neutrons together from the nuclei of lighter elements(Thoughtco). In the stars, hydrogen may be fused to give helium, lithium and other elements lighter than iron.
Supernova Nucleosynthesis: A supernova is a process in which a star releases a large amount of energy together with neutrons, hence elements that are heavier than iron, like uranium and gold, can be produced in the process.
la densidad de un aceite liviano para vehiculo es 0.87g/cm3 calcules su volumen especifico y peso especifico
Answer:
Pe = 8700 N/m³
Vesp = 1,15 cm³/g
Explanation:
Ya que conocemos el valor de la densidad de este aceite, es muy sencillo calcular tanto volumen como peso específico.
En el caso de volumen específico, esta se refiere al cociente del volumen de un líquido con su masa respectiva. En otras palabras, es el inverso de la densidad, por tanto usamos la siguiente expresión para el volumen específico:
Vesp = 1/d
Vesp = 1 / 0,87
Vesp = 1,15 cm³/gPara el caso del peso específico, se calcula como el cociente de la masa del líquido y su volumen que ocupa. Sin embargo no conocemos ninguno de esos dos datos, por lo que para calcular el peso específico solo basta multiplicar este valor por la aceleración de gravedad, que vamos a asumir para este problema que es 10 m/s². Y ademas cambiaremos las unidades de densidad de g/cm³ a kg/m³. Esto es porque las unidades de peso específico son N/m³ y los newton (N) son kg m/s².
d = 0,87 g/cm³ * (1 kg/1000g) * (100 cm/1m)³ = 870 kg/m³
Pe = 870 kg/m³ * 10 m/s²
Pe = 8700 N/m³ESpero te sirva.
A hypothetical AX type of ceramic material is known to have a density of 3.15 g/cm3 and a unit cell of cubic symmetry with a cell edge length of 0.41 nm. The atomic weights of the A and X elements are 90.5 and 37.3 g/mol, respectively. On the basis of this information, which one of the following crystal structures is possible for this material?
a. Sodium chloride
b. Cesium chloride
c. Zinc blende
Answer:
b.
Explanation:
From the given information:
[tex]p = \dfrac{zM}{N_oa^3}[/tex]
where;
a = 0.41 nm = [tex]4.1 \times 10^{-8} \ cm[/tex]
M = 90.5 + 37.3 = 127.8 g/mol
[tex]N_o = 6.023 \times 10 ^{23}[/tex]
p = 3.15 g/cm³
∴
[tex]3.15 = \dfrac{z \times 127.8}{(6.02 \times 10^{23}) \times (4.1 \times 10^{-8} )^3}[/tex]
Z = 1
Thus, the ceramic material has a simple cubic crystal system and the crystal structure is possible to be Cesium chloride.
1. Which of the following is an inherited trait?
If gold is selling presently for $1000.00/oz how much would 1 cubic inch of gold be worth?
Note: 1 inch= 2.54 cm; 1 oz. =28.3 g Density of gold: 19.3 g/cm^3
Answer:
$89.69
Explanation:
$1000 = 1 oz = 28.3g
volume = mass/density
volume = 28.3/19.3 = 1.47cm³
1 inch= 2.54 cm
1 cubic inch = (2.54)³ = 16.39 cm³
16.39/1.47 = 11.15 cubic inch
11.15 cubic inch = $1000
1 cubic inch = 1000/11.15 = $89.69
Name each of the following organic molecules. 
I NEED HELP ASAP! IF I FAIL THIS IMMA GET KICKED OFF THE VOLLEYBALL TEAM!!!!!! PLS TELL ME IS THIS IS CORRECT the picture is above! pls help!
Answer:
The image appears to have some words cropped out. Nonetheless, "receptor" would seem to be the most appropriate term here.
What three biotechnologies do you think are the most important???
Answer:
Vaccines. Vaccines are chemicals that stimulate the body's immune system to better fight pathogens when they attack the body. ...
Antibiotics. ...
Pest Resistant Crops. ...
Plant and Animal Breeding. ...
Biocatalysts. ...
Fermentation. ...
Microorganisms. ...
Bioremediation.
Explanation:
I NEED THE ANSWER IMMEDIATELY TONIGHT, PLEASE!!!
Arrange the following elements in order of decreasing metallic character.
Ra, Sb, In, Cl, Ba, As
Answer:
Ra,Ba,In,Sb,As,P hope this helps you out good luck
An unknown sample is analyzed using paper chromatography using solvent X as mobile phase. One spot is observed after the paper is developed. The same unknown substance is re-analyzed using solvent Y as the mobile phase. This time, three spots are observed after the paper is visualized. Is the unknown sample a pure substance or a mixture? Explain your answer.
Answer:
The substance is a mixture
Explanation:
The question lets us know that when solvent X was used as the mobile phase, we obtained only one spot. This may deceive us into thinking that the substance is pure since a pure substance has only one spot on a chromatogram.
However, the same substance yields three spots with solvent Y. This shows that the unknown sample is a mixture of substances and solvent X was unable to fully separate the mixture.
If a country has a large amount of children born, but most do not live past 5, the population
pyramid would be described as:
Expansive
Constrictive
Stationary
Answer:
Constrictive,
Explanation:
Constrictive population pyramid displays lower percentages of younger people
The bond enthalpy of the Br–Cl bond is equal to ΔH°rxn for the following reaction. BrCl(g) → Br(g) + Cl(g) Using the following data, what is the bond enthalpy of the Br–Cl bond?
a. Br2(l) → Br2(g) ΔH°rxn = 30.91 kJ/mol
b. Br2(g) → 2Br(g) ΔH°rxn = 192.9 kJ/mol
c. Cl2(g) → 2Cl(g) ΔH°rxn = 243.4 kJ/mol
d. Br2(l) + Cl2(g) → 2BrCl(g) ΔH°rxn = 29.2 kJ/mol
Answer:
a. Br2 (l) → Br2(g) ΔH°rxn = 30.91 kJ/mol
Explanation:
Bond enthalpy is the energy which is required to break 1 mol of of bonds in gaseous covalent molecules. Bond breaking process can be endothermic or exothermic depending on the molecules association. The process needs to be performed in chemical laboratory under standard conditions.
Helppp Convert 240 seconds into minutes.
Answer:
240/60 .minute
plz make me brainliest
Atoms of which of the following elements are largest?
A:
Na
OOOO
Answer:
yes answer os Na because it's electronic configuration is 1s^2,2s^2,2p^6,3s^1
please help me! This is due by tomorrow!
Answer:d
Explanation:Since the earth would be closer to the sun the ozone layer would not be able to handle the more powerful ultra violet rays making the earth to hot.
What organelle(s) act(s) as "the boss" inside a cell? A.The alveoli B. The mitochondria C. The nucleus D. The lysosomes
The organelle(s) that act(s) as "the boss" inside a cell is The nucleus.
What is cell in the nucleus?Nucleus is the center most part of the cell that contains all the chromosomes and that contains all the genetic information.
The nucleus is a double-membraned organelle that contains the genetic material and other instructions required for cellular processes. It is exclusively found in eukaryotic cells and is also one of the largest organelles.
The nucleus contains nearly all of the cell's DNA, surrounded by a network of fibrous intermediate filaments and enveloped in a double membrane called the nuclear envelope. The nuclear envelope separates the fluid inside the nucleus, called the nucleoplasm, from the rest of the cell.
Therefore, The organelle(s) that act(s) as "the boss" inside a cell is The nucleus.
Learn more about Nucleus of cell here:
https://brainly.com/question/4031640
#SPJ2
The formation of ethyl alcohol (C2H5OH) by the fermentation of glucose (C6H12O6) may be represent by the following: C6H12O6 --> 2 C2H5OH 2 CO2 If a particular glucose fermentation process is 70.0% efficient, how many grams of glucose would be required for the production of 51.0 g of ethyl alcohol (C2H5OH)
Answer:
142.5 g
Explanation:
According to the chemical reaction:
C₆H₁₂O₆ --> 2 C₂H₅OH + 2 CO₂
1 mol of glucose (C₆H₁₂O₆) forms 2 moles of ethyl alcohol (C₂H₅OH) and 2 moles of carbon dioxide (CO₂).
We first convert the moles to grams by using the molecular weight (Mw) of each compound:
Mw (C₆H₁₂O₆) = (12 g/mol x 6) + (1 g/mol x 12) + (16 g/mol x 6)= 180 g/mol
1 mol C₆H₁₂O₆ = 180 g/mol x 1 mol = 180 g
Mw(C₂H₅OH) = (12 g/mol x 2) + (1 g/mol x 5) + 16 g/mol + 1 g/mol= 46 g/mol
2 mol C₂H₅OH = 2 mol x 46 g/mol = 92 g
Thus, when the process is 100% efficient, 180 grams of glucose produce 92 grams of ethyl alcohol. To form 51.0 grams of ethyl alcohol, we will need:
51.0 g C₂H₅OH x (180 g C₆H₁₂O₆/92 g C₂H₅OH) = 99.8 g C₆H₁₂O₆
As the process has a lower efficiency (70.0%), we will need more glucose to obtain the required yield. So, we divide the mass of glucose required for a process 100% efficient by the actual efficiency:
mass of glucose required = 99.8 g C₆H₁₂O₆/(70%) = 99.8 g C₆H₁₂O₆ x 100/70 = 142.5 g
Therefore, it would be required 142.5 grams of glucose to obtain 51.0 grams of ethyl alcohol.
What is the percent oxygen in Rb2Cr2O7
Answer:
28.9452
Explanation:
Answer:
28.9452%
Explanation:
Rb-44.1781
Cr-26.8767
O-28.9452
C3H8 (g)+ 502 (g) 3CO2 (g) + 4 H2O (g) + 531 kcal
Answer:
Exotérmica.
Explanation:
¡Hola!
En este caso, dado que la mayoría de reacciones de combustión son exotérmicas, al generar calor en los productos, es posible inferir que esta reacción, referida a la combustion de metano es exotérmica debido a lo anteriormente mencionado, ya que el término de energía de reacción, 531 kcal, está al lado de los productos, lo que quiere decir que es energía generada.
¡Saludos!
Ions form as a result of uneven charge distribution between the nucleus and the electron cloud. TRUE OR FALSE
Answer:
true
Explanation:
true
Also what happens if you decrease NOCL
Answer:
el que paso del one jhaulio
Explanation:
You are planning an experiment that requires 0.0900 mol of nitrogen monoxide gas (NO). What volume would you need at STP? Answer in units of L.
Answer: The volume needed at STP is 2.016 L
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text {Molar volume}}[/tex]
[tex]0.0900mol=\frac{x}{22.4L/mol}[/tex]
[tex]x=0.0900mol\times 22.4L/mol=2.016L[/tex]
Thus the volume needed at STP is 2.016 L
When a substance easily dissolves in a liquid, it has high solubility in that liquid. When a substance does not easily
dissolve in a liquid, it has low solubility in that liquid. Solubility of a gas in water describes how well the liquid can "hang
on" to gas, instead of releasing it into the air. Based on the results of your experiment, do you think that CO2 has a higher
solubility in hot water or cold water? Why?
Answer:
cold water because as temperature increases the less soluble co2 is in it
Explanation:
how is the temporary hardness of water removed by boiling method explain in brief
Answer:
Explanation:
This happens when water is boiled. Boiling the water causes the precipitation of solid calcium carbonate or solid magnesium carbonate. This removes the calcium ions or magnesium ions from the water, and so removes the hardness.
You are given a sample of several compounds to separate by paper chromatography. You draw a pencil line exactly 1.00 cm from the bottom of the paper, and place a spot of sample on it. You dry the sample, then develop it in a solvent. When the chromatogram is taken out of the solvent, the paper is wet up to 9.17 cm from the bottom of the sheet. The compound you are interested in shows up as a spot 7.57 cm from the bottom of the paper. Calculate the following:
a. How far did the compound move?
b. In the same time, how far did the solvent move?
c. What is the Rf factor for the compound?
Answer:
a. 6.57 cm
b. 8.17 cm
c. 0.80
Explanation:
a. The compound moved from where it was first placed, to a spot 7.57 cm from the bottom of the paper, in other words:
7.57 cm - 1.00 cm = 6.57 cmb. A similar method is made for the solvent:
9.17 cm - 1.00 cm = 8.17 cmc. The Rf of the factor is equal to the distance that the compound moved divided by the distance the solvent moved:
6.57 cm / 8.17 cm = 0.80Explain how Florida droughts lead to water restriction
Answer:
Due to drought in Florida, people were informed to minimize the use of water and certain rules were made regarding water usage.
Explanation:
A drought is a shortage in the water supply. The drought in Florida led to water restriction as it was a way to prevent the shortage of water in the long run. Florida experienced a drought and water restriction was used as a way to curtail further shortage of water.
New rules were made to prevent wastage of water such as limiting lawn watering to one day in a week, limiting of car washing, and homeowners were not allowed to do things that can lead to an increase in water usage.