Geographers use two key questions every day. When using these two key questions to study the migration of birds, the geographer would ask "Where are the birds going?" and Option C. "when are the birds traveling?".
This question is crucial because the timing of bird migration is determined by a combination of factors, including the season, weather patterns, food availability, and mating behaviors. By understanding when birds are migrating, geographers can gain insights into the ecological conditions that influence bird behavior and survival. For example, understanding the timing of bird migration can help geographers predict changes in bird populations, as well as the potential impacts of climate change on bird behavior and migration patterns.
In addition, understanding the timing of bird migration can also be useful for conservation efforts. By monitoring bird migration patterns and timing, geographers can help identify critical habitats and migration routes that need protection and conservation. This information can also be used to inform land-use decisions and help mitigate the impacts of human activities on bird populations.
Overall, geographers use the two key questions of "Where are the birds going?" and "When are the birds traveling?" to gain a deeper understanding of bird migration patterns and the ecological conditions that influence bird behavior and survival. By asking these questions, geographers can contribute to our understanding of the natural world and help inform conservation efforts to protect and preserve biodiversity. Therefore, the correct option is C.
Know more about Ecological conditions here:
https://brainly.com/question/29658743
#SPJ11
in the troposphere the temperature decrease with altitude is 6.5°C/km, this is called environmental lapse rate.
1. If the tropopause (top of the troposphere) is 12.3 km high and the temperature at the surface 18°C, what is the temperature at the tropopause?
The temperature at the tropopause is -73.15.
What is troposphere?The troposphere is the first and lowest layer of the atmosphere of the Earth. The troposphere is the thinnest layer of the atmosphere, but at the same time it is where the most turbulence is found. The largest amount of gas we can find in our atmosphere is nitrogen. It contains 75% of the mass of the planetary atmosphere, 99% of the total mass of water vapor and aerosols, and is where most weather phenomena occur. The troposphere is the lowest layer of Earth's atmosphere, and is also where nearly all weather conditions take place.
Learn more about troposphere, refer:
https://brainly.com/question/22853030
#SPJ9
What is one element a topographic map shows?
Climate
Landforms
Space
Weather
Answer:
topographic maps show landforms
Answer: Landforms
Explanation:
If you were diving from a boat to a depth of 4 km. What density layers of the ocean would you descend through? How deep would you expect each layer to be? What would the temperature and salinity profile of each layer look like? Where would you expect to see the most and least range of colors?
Note that if one was diving from a boat to a depth of 4 km, they would first descend through the surface mixed layer, which is typically about the top 50m of the ocean. The temperature and salinity are relatively constant throughout this layer.
Temperature and salinity stay roughly constant with depth, but are usually colder and more saline than the mixed layer above the top. The ocean gets generally dark and frigid at depths deeper than roughly 1,000 meters, with little light and low temperatures and salinity. At these depths, the color range should be the narrowest mostly b;uish grey depending on the spectrum of ligght that filters through.
What is ocean diving?Scuba diving is a type of underwater diving in which divers employ breathing equipment that is totally self-contained and not dependent on a surface air supply. Christian J. Lambertsen invented the term "scuba," an abbreviation for "Self-Contained Underwater Breathing Apparatus," in a 1952 patent.
Scuba diving and freediving are the two major types of diving. While freediving is done without a breathing device, scuba diving does. There are several sorts of scuba diving, each classified as recreational or professional.
Learn more about Ocean Diving:
https://brainly.com/question/24418935
#SPJ1
With regard to the vertical structure of the atmosphere, air pressure is highest at:
The rate at which pressure drops with height is always the greatest close to the ground.
What do you mean by Air pressure?The force that the weight of the air exerts on the surface of the earth is known as air pressure. At sea level, the air pressure is maximum and falls as altitude increases.
Air in the atmosphere exerts pressure that is larger close to the Earth's surface and lessens as you rise above it. At sea level, the atmosphere's density and depth are at their highest, and they gradually decrease as you gain height.
Because the earth is not heated by the sun uniformly, pressure varies from day to day at the surface. Warm air rises, which causes low pressure to exist in certain areas. Low-pressure systems are the names for these regions.
Therefore, Air pressure is highest at near the ground.
Learn more about Air pressure, here;
https://brainly.com/question/15189000
#SPJ1
the early view of the earth's interior layers resembled a hard-boiled egg. identify the correct labels for this simplified view.
Because they both formed from the same nebula, the interior of the Earth and a "meteorite" have similar compositions.
The dense, dusty nebula in outer space is made up of "dust and gas." Thus, both the meteorite and the earth are solid particles that were created in the nebula. As well as being referred to as meteorites, asteroids, and comets, meteorites are solid particles.
Because they both sprang from the same nebula, they have the same makeup. Frontier Attitude is the urge to take charge of and make the most of nature. Maybe it's still there, in the mining and farmland areas. Instead of focusing on quality, it is judged by quantity. The earth has its own axis to rotate.
To know more about earth's on
https://brainly.com/question/12021802
#SPJ4
The general term that refers to the tendency of a parcel of air to either remain in place or change its initial position is
The general term for an air parcel's propensity to either stay put or move from its initial location is stability.
When the air parcels within the atmosphere are stable, no vertical movement can occur within them. Stable air is characterized by negative buoyancy.
There is no tendency for air packets to move vertically. The air parcel (the bubble of air) that is rising off the surface is encircled by air that is warmer than it is, as shown in the graph below.
The air parcel tends to resist any upward movement on its own and, if allowed, will return to its original location because it remains cooler and denser than the surrounding air.
To learn more about air parcels at
https://brainly.com/question/30229540?referrer=searchResults
#SPJ4
Although this has slowed a little bit in the last few years, since the beginning of the 21 st century, the fastest growing market for oil in the world has been:
Answer:
Saudi Arabia
Explanation:
Saudi Arabia has been the number one largest producer/seller of oil since the 21st century.
Happy to help :D
A student designed an experiment to demonstrate the movement of Earth plates. The steps of the experiment are listed below.
Make a vertical slit in the middle of a cardboard piece.
Fold and place two pieces of paper inside the slit and tape two blocks of cardboard labeled Earth plate on top of the paper as shown below.
Push up the papers below the slit.
Observe the direction of motion of the Earth plates.
The picture shows a piece of cardboard with a vertical slit in the middle. Two pieces of paper are placed inside the slit such that half of the pieces are above the cardboard and half below it. Two blocks of cardboard labeled Earth plate are placed on top of the paper, parallel to the slit, on either side of the slit in the cardboard.
The student's experiment most likely demonstrates how
A:faults are created
B:earthquakes subside
C:rift valleys are formed
D:Earth's crust is destroyed
The student's experiment most likely demonstrate how A. faults are created.
What is an experiment?It should be noted that an experiment simply means a procedure that is undertaken to make a discovery.
In this case, the student's experiment most likely demonstrate how faults are created.
Learn more about experiments on:
brainly.com/question/17274244
#SPJ1
Scientists have noted that at present the Earth is closest to the sun in January and farthest from the sun in July. The reverse will be true in 13,000 years and the Earth will then be closer to the sun in July than January. How does Earth's current proximity to the sun affect the climate in the Northern Hemisphere? (3 points)
The Earth's current proximity to the sun affected the climate as people in the southern hemisphere experience the shorter day lengths and colder temperatures of winter.
What determines the amount of sun current that earth part recieves?The seasons and biodiversity are determined by the earth's relationship to the sun and the amount of light it receives. The amount of sunlight received by a region is determined by the tilt of the earth's axis rather than its distance from the sun.
Because it is tilted toward the sun and receives the most direct sunlight, the northern hemisphere experiences summer during the months of June, July, and August. Summer in the southern hemisphere, on the other hand, occurs during the months of December, January, and February because that is when it receives the most direct sunlight.
Read more about Earth's proximity
brainly.com/question/25624188
#SPJ1
which of the following describes a blended family
A blended family is also called a stepfamily. We call a family a blended family when a couple marries with children from previous relationships. One or both parents can have children before they formed a blended family. They don't necessarily have to live together.
The blended family has its share of rewards like a healthier parental relationship, financial support, and more people to relate with.
But a blended family can also have some common problems. These may include sibling rivalry, not letting the partner parent the child, not explaining the matter to the children, emotional problems even legal issues.
Learn more about family:
https://brainly.com/question/29635273
This is an incomplete question.
A blended family is described as "a couple family with two or more children, at least one of whom is the natural or adopted child of both partners of the coupling, and at least one of which is the stepchild from either partner in the couple."
What is a blended family in sociology?A mixed family is one in which at least one parent has kids who are not legally or biologically related to the other parent or spouse. Both parents may have children, whether they are biologically related or not, as well as children they have had together. Take Lucas and Brianna as an example.
What challenges do blended families face?Problems with Blending Families
You or your partner can experience discomfort and find it challenging to adjust to your new marriage.It could take some effort to establish a solid bond with your stepchildren.It's probable that different expectations for the house exist among the members of your newly formed stepfamily.Learn more about blended family: https://brainly.com/question/9743198
#SPJ1
What we’re two long-term effects of the Black Death on European society?
What is the term for flattening the global,or the difference in appearance and shape of world maps
Answer:
Map Projection
Explanation:
Question 8
Match the stars in.er of brightness.
Sirius, -1.47
Tau Ceti, 3.49
Epsilon Indi A, 4.69
Alpha Centauri, -0.01
Antares, 1.09
Regulus, 1.35
[Choose ]
[Choose ]
[Choose ]
[Choose ]
[Choose ]
✓[Choose]
3rd brightest
2nd brightest
5th brightest
dimmest
4th brightest
brightest
1 pts
Epsilon Indi A, 4.69 at the darkest Tau Ceti, 3.49 with second-brightest star, Sirius, -1.47 with third-brightest star Regulus is fifth brightest at 1.35 and Antares is brightest at 1.09.
What is the deity of Antares?Antares, the Greek word for the god of war, means "rival of Ares." He adopted the name Mars in Rome. Therefore, Mars' competitor is Antares. Because of the blood-like hue of Mars, observers of the night sky equated the star with the god of war.
The largest star, Antares?The brightest star in the zodiacal constellation of Zone and one of largest known stars, Antares, also known as Alpha Scorpii, is a red, some to variable star with an apparent visual magnitude of about 1.1. It is several hundred times larger than the Sun and has 10 times the Planet's luminosity.
To know more about Antares visit:
https://brainly.com/question/14471998
#SPJ1
If you were diving from a boat to a depth of 4 km. What density layers of the ocean would you descend through? How deep would you expect each layer to be? What would the temperature and salinity profile of each layer look like? Where would you expect to see the most and least range of colors?
Based on geographical analysis, it is concluded that if one was diving from a boat to a depth of 4 km, they would descend through the surface of mixed layers, The deepness of each layer should be around 50m of the ocean. The temperature and salinity of each layer are expected to be relatively constant.
At a depth of about 1,000 meters, the color range should be the narrowest with a bluish grey, while at the top, the color range is more visible, depending on the spectrum of light that filters through.
What is ocean diving?Scuba diving is a type of underwater diving in which divers employ breathing equipment that is self-contained and not dependent on a surface air supply.
According to an oceanographer, Christian J. Lambertsen who invented the term "scuba," an abbreviation for "Self-Contained Underwater Breathing Apparatus," in a 1952 patent.
Scuba diving and free diving are the two major types of diving. While free diving is done without a breathing device, scuba diving does.
There are several sorts of scuba diving, each classified as recreational or professional.
Hence, in this, it is concluded that colors are different underwater.
Learn more about Ocean Diving here:
brainly.com/question/24418935
#SPJ1
PLEASE HELP GEOGRAPHY The physical geography of an area is important to the metes and bounds survey system because this survey system required
features of the natural landscape such as rivers, streams, trees, and boulders that could be used to define the property boundary.
flood plains on which an orderly linear pattern provided all landowners with the same number of acres and access to groundwater.
a navigable river as a boundary that would give free access to water for irrigation and transportation to every landowner.
flat plains over which a grid could be laid over the landscape and then divided into square-shaped townships with 6-mile sides.
extensive areas of unforested land so that surveyors could lay out straight lines for roads prior to dividing up the land for agriculture.
The physical geography of an area is important to the metes and bounds survey system because features of the natural landscape like rivers, streams, trees, and boulders that could be used to define the property boundary.
What is metes and bounds survey system ?The limits of a piece of land are described through a metes and bounds survey. The phrase "metes" refers to a mathematical description of the property lines that make up a property's perimeter, and the term "bounds" specifies what each line is surrounded by.
Metes and bounds are the limits of a piece of land that may be located by its natural features. Metes and bounds markers are frequently employed in a land's "legal description." Legal description, which is recorded with the land's deed, is the geographical description of a piece of land that pinpoints its exact location.
The appropriate response is option A.
To learn more about metes and bounds
https://brainly.com/question/14327693
#SPJ1
2solutions to animals and change in temperature for weathering
Answer:
When some animals (and plants) encounter the impacts of climate change in their environment, they respond by changing behavior and moving to a cooler area, modifying their physical bodies to better deal with the heat, or altering the timing
I think it's the correct answer
which of the following best approximates the average rate of change in the annual budget for agriculture/natural resources in kansas from 200820082008 to 201020102010 ?
The average rate of change in the annual budget is B) 65,000,000 per year.
Solution
Average rate of change is the change in the value of a quantity divided by the elapsed time.
Thus, average rate of change in the annual budget for the agriculture/natural resources in Kansas from 2008 to 2010 is (488,106-358, 708) $1.000
= $64,699,000 or 65,000,000
What is annual budgetAnnual budget is a financial plan made by the government, company or other organization that includes estimated income and expenses for the next year. This budget is used to make financial management decisions and ensure that there are sufficient funds to achieve organizational goals. An annual budget can also be used as a control tool to ensure that income and expenses are always within set limits.
Your question is incomplete but most probably your full question was:
which of the following best approximates the average rate of change in the annual budget for agriculture/natural resources in kansas from 2008 to 2010?
A $50,000,000 per year
B $65,000,000 per year
C $75,000,000 per year
D $130,000,000 per year
Learn more about annual budget at https://brainly.com/question/13969068.
#SPJ4
Which geographic features influenced the political borders and boundaries of China? Choose three correct answers.
•deserts
•mountain ranges
•large bodies of water
•grasslands
•glaciers
Answer:
Mountain Ranges
Large Bodies of Water
Deserts
Explanation:
It is important to note that the given choices are mostly on a geographical standpoint, rather than a political boundary.
1) Mountain Ranges: Southwest China (ranging from 重庆市 (Chongqing Municipality) to 西藏自治区 (Tibet Autonomous Region) districts), are primarily bordered by 橫斷山脈 (Hengduang Mountain Range). In the North, China is bordering the 太行山 (Taihang Mountain Range).
2) China primarily borders 黃海 (Yellow Sea), the 南海 (South China Sea) and 东海 (East China Sea), all of which are part of the Pacific Ocean.
3) Deserts have been growing (also known as desertification) naturally, and shrinking through Chinese government intervention, so parts of deserts may be subject to change regarding whether or not they are part of China. The most well known desert is the 戈壁 (Gobi Desert), which is found in North China.
Now, these 3 geographic features influence mainly the defensive aspects of borders. This is typically known as natural barrier. Mountain Ranges are known for being a natural barrier, as, when moving large amounts of troops and supplies across, it can take a long time. One well known example (though it is not part of China's history), is Hannibal and his crossing of the Alps into Rome. In reference to mountain ranges being natural defenses, it took around 16 days and he lost around half his army crossing. As many mountains typically do not have any kind of greenery or food based on climate, especially during the winter months. It is important to note, however, that while these are viewed as "natural barriers", they usually did not stop the Steppe tribes found in Mongolia during the Song Dynasty, leading to the topple of the Song and the Yuan Dynasty under Mongol rule. Other than civil wars (which occurred frequently during Imperial China, particularly after the death of a ruling emperor), there was few naval conflicts that occurred that Imperial China did not, herself, initiate.
Learn more about geographic features of China, here: https://brainly.com/question/4978867
Which choice describes the information that can be learned by using a wind vane?
A. It is a weather tool that collects and measures precipitation.
B. It is a weather tool that shows a change in temperature by moving weights in a liquid.
C. It is a weather tool that spins freely and will point in the direction the wind is blowing.
D. It is a weather tool that measures the level of humidity in the air.
Answer: C. It is a weather tool that spins freely and will point in the direction the wind is blowing.
What are the two approaches adopted in organizing geographical knowledge?
Answer:
FocusGeographical studies can be made with two different basic approaches.These are theRegional Approach and the Systematic (Topical)Approach.The REGIONAL approach studies the various characteristicsof each region (realm) of the world
Systematic Approach and Regional Approach are the approaches adopted in organizing geographical knowledge.
What is Systematic Approach?Alexander Von Humbolt, a German geographer, devised the systematic or nomothetic technique (1769-1859). This method focuses on one specific occurrence to get a thorough knowledge. Systematic research is the study of particular natural or human phenomena that result in particular spatial patterns and structures on the surface of the earth. Four main branches can be found in systematic geography.
What is Regional Approach?The ideographical approach is another name for it. It was created by Humbolt's contemporaries Carl Ritter (1779–1859). The areas may be divided into those based on a single element, such as relief, rainfall, vegetation, or per capita income, or they may be divided into those with multiple factors linked together. Regions can also be thought of as administrative subdivisions like states, districts, and taluks.
To know more about Systematic and Regional Approach
brainly.com/question/24473755
#SPJ2
The use of terrace farming by the Incas was an adaptation to their physical geography.
Choose the two examples in the image that demonstrate the use of terrace farming around the world.
it
Indigenous methods from all around the world are preserved through terrace farming. The first "Living Cultural Landscape" label was given by UNESCO to a location in the Philippines. For ages, people in those places assimilated farming practices into their culture and way of life.
What is terrace farming, and how did the Incas gain from employing it?
Since they resided in the highlands, the Incas had to make level space for farming. They built terraces to accomplish this. In the slope, steps of land were dug out to form terraces.
This ingenious agricultural method was fantastic for irrigation and avoiding droughts in addition to helping them grow crops.
What two types of terrace farming are there?
Broad-base, narrow-base, and grassed back-slope terracing are the most common varieties in farming. Depending on how steep the hill is, they will make a decision.
Learn more about terrace farming
brainly.com/question/17379906
#SPJ1
A standard number die is tossed. Find P(3 or odd).
Answer:
Total number is 6
odd number is 1,3,5
probability = total number of odd number / total number
hence the answer will be 1/2
Explanation:
hope it helps you and give me a brainliest
what is a temporary settlement
Answer: Kind of like a Base Camp . . .
Explanation: Think about it this way, you are in a large group going on a long trip, you need to stop say for about 2-3 weeks(Maybe for people to treat injuries, or recover from them), and you set up a place to stay just for a little bit.
Hope this helps!
How does geopolitical circumstances and context influence the decision to protect vulnerable citizens?
The geopolitical circumstances and context influence the decision to protect vulnerable citizens as the likelihood of war and peace in various regions of the world is profoundly influenced by shifting political-geographical arrangements and perceptions.
The geographical circumstances are essential to the endeavor to analyze the shifting geopolitical landscape since they are a field of study that is concerned with understanding how phenomena on Earth's surface are organized.
Understanding the origins of violence and peace has benefited from the place-based perspective that permeates much of the work in the geographical sciences. When seen broadly, many wars seem to be the outcome of a single economic, social, cultural, or environmental cause. However, numerous place-based studies have demonstrated that violence rarely never occurs as a direct result of something like resource constraints.
Similar to this, the likelihood of violent conflict between groups is frequently linked not just to economic or social injustices but also to specific local geographic conditions like the distribution of groups.
To learn more about geographical circumstances refer to:
https://brainly.com/question/27784511
#SPJ1
Which of the following three kinds of objects resides closest to the Sun on average? (a) comets (b) asteroids (c) jovian planets
Out of all the options listed here, the objects closest to the Sun on average are the asteroids.
The Sun resides in the middle of the solar system. If we look at the structure of the solar system, we find that the asteroids lie closest to the Sun. The asteroid belt lies in between the Inner planets and the Jovian planets. It comes before the Jovian Planets - Jupiter, Saturn, Neptune, and Uranus. Hence, it is closer than the planets.
As for the comets, there is no guarantee where they might lie. This is because they keep orbiting and roaming around the Universe. So, on average, we can assume that they lie far back as compared to the Asteroids and the Planets.
Learn more about Asteroids on
https://brainly.com/question/19148674?referrer=searchResults
#SPJ4
two factor that favour the development of industries
Some of the essential aspects affecting industrial productivity are :
(i) Technological Development
(ii) Quality of Human Resources
(iii) Availability of Finance
(iv) Managerial Skill
What are the factors favor the development of industries?
industry, a bunch of productive businesses or organizations that produce or supply goods, services, or sources of income. In economics, industries exist normally separated as primary, secondary, tertiary, and Quaternary; secondary industries are further categorized as heavy and light.
Some of the essential aspects affecting industrial productivity are :
(i) Technological Development
(ii) Quality of Human Resources
(iii) Availability of Finance
(iv) Managerial Skill
(i) Technological Development:Technological development recreates an essential part to influence industrial productivity. “The application of motive power and automated modifications to the process of production has revved the peace of industrialization to an unprecedented degree, and has provided us the vision of the vast and unknown frontiers that still lie ahead of us in the realm of applied science and technology.”
(ii) Quality of Human Resources:Manpower plays an important role In increasing industrial productivity in most industries. If the labor force exists not adequately qualified and/or is not properly inspired, all the steps taken to improve the industrial productivity will have no result the employees’ version and perspectives have an immense influence on the productivity of any industrial unit.
(iii) Availability of Finance:
The ambitious plans of an industrial unit to improve productivity will remain mere dreams if adequate economic resources exist not available to introduce technological advancements and provide appropriate training to the workers.
(iv) Managerial Skill
The significance of managerial talent includes improvement with the advancement in technology. Professional managers exist needed to make better usage of the new technological development. Since modern enterprises stand to run on a large scale, managers must maintain imagination, judgment, and willingness to bear imitative.
To learn more about factors favor the development of industries refer to:
https://brainly.com/question/667688
#SPJ9
HELP !!!!!!!!!! use the reading maps and the internet to write about and predict the impact of climate change in Canada use our lesson on physical geography to make a comparison to that of thee UAE write at least two paragraphs
In an overview, climatic change in Canada has had huge impacts on the country's environment and landscapes. Some of which are extreme temperatures, increase in forest fires, loss of ice sheet etc.
What are some impact of climate change in Canada?Understanding current climate change for Canada necessitates knowledge of not only climate changes, but also the climate sensitivity of key aspects of the Canadian economy and social fabric, as well as the ability of Canadian governments, industry, and individuals to implement adaptation measures.
Canada is a vast country with significant variation in climate, landscapes, communities, and economies between and within regions. Climate change has resulted in higher temperatures across much of the country, altered precipitation patterns, reduced sea-ice cover, shifting hydrological conditions and changes in some extreme weather events over the last century.
Read more about climate change
brainly.com/question/24793273
#SPJ1
Which of the following tundra features would not be found at the top of the Andes in
Ecuador?
A) fierce winds and frigid nights
B) areas of boggy or saturated soil
C) shallow-rooted, dwarf vegetation
D) a brief, bright growing season and a long, dark winter
E) All of these features would be found at the top of the Andes in Ecuador
The correct answer is E) All of these features would be found at the top of the Andes in Ecuador.
Fierce winds and frigid nights, shallow rooted dwarf vegetation, and a brief bright growing season and a long dark winter are all features that can be found at the top of the Andes in Ecuador. However, the area does not have areas of boggy or saturated soil.
The Andes Mountain range in Ecuador is one of the most unique and diverse ecosystems on Earth. Despite its extreme elevation and diverse climate, the area has one distinct feature that sets it apart from other mountain ranges in other parts of the world: the lack of boggy or saturated soils.
The reason for this is due to the incredible amount of erosion in this region. The Andes have been subject to extreme erosion due to its steep slopes, heavy rainfall and snow, and strong winds. This erosion has led to the creation of a soil type known as "pumice," which is a porous rock formed when hot lava cools quickly. This rock has a high water-absorbency rate and does not allow for the formation of boggy or saturated soil.
Learn more about Ecuador at : https://brainly.com/question/10452835
#SPJ4
Snazzy-G says convergent means ___, divergent means ___, and transform is when the plates ___.
A. collide, divide, slip and slide
B. divide, collide, slip and slide
C. slip and slide, collide, divide
D. collide, slip and slide, divide
Answer:
A. collide, divide, slip and slide.
Explanation:
After 45–60 minutes, turn off the dripping faucet and let the bar of soap air dry overnight. If possible, rotate the bar once or twice while it’s drying so that it doesn’t stick to the surface below.
Once it is dry the next day, reweigh the bar of soap. Use its initial and final masses to calculate how much of the soap was weathered and removed. Record this amount in the space below.
This is an experiment involving measuring the Initial and Final mass of soap after being washed with water and weathered. The difference between the masses is to be explained below.
How to illustrate the experiment?The first step of the experiment is to measure the weight of the soap bar and record it.
The second step includes wetting the soap with water using the dripping faucet and rubbing it to create lather.
The third step is to leave the soap for 45-60 minutes drying in the air, making sure that the bar does not stick to the surface and lose its mass other than the lathering process.
The fourth step is to measure the weight of the bar of soap and record it after drying it.
Finally, observe the recorded masses and find out the difference between the initial and final masses.
Learn more about experiment on:
https://brainly.com/question/17274244
#SPJ1
Answer:
The first step of the experiment is to measure the weight of the soap bar and record it.
The second step includes wetting the soap with water using the dripping faucet and rubbing it to create lather.
The third step is to leave the soap for 45-60 minutes drying in the air, making sure that the bar does not stick to the surface and lose its mass other than the lathering process.
The fourth step is to measure the weight of the bar of soap and record it after drying it.
Finally, observe the recorded masses and find out the difference between the initial and final masses.
Explanation: