Give the structure of the major and minor organic products formed when HBr reacts with (E)-4,4-dimethyl-2-pentene in the presence of peroxides. When drawing hydrogen atoms on a carbon atom, either include all hydrogen atoms or none on that carbon atom, or your structure may be marked incorrect.In each reaction box, place the best reagent and conditions from the list below.

Answers

Answer 1

The structure of the major and minor organic products formed when HBr reacts with (E)-4,4-dimethyl-2-pentene in the presence of peroxides is shown in the image attached.

Reaction of (E)-4,4-dimethyl-2-pentene with HBr by free radical mechanism

The reaction is initiated by the hom---olytic cleavage of H-Br bond to form two free radicals, hydrogen (H•) and bromine (Br•), which are highly reactive and unstable.

The free radical bromine (Br•) reacts with the alkene (E)-4,4-dimethyl-2-pentene to form a more stable carbon-centered free radical intermediate.

The product is washed with aqueous HCl to remove any remaining impurities and neutralize the solution.

Learn more about free radical mechanism:https://brainly.com/question/11631123

#SPJ1

Give The Structure Of The Major And Minor Organic Products Formed When HBr Reacts With (E)-4,4-dimethyl-2-pentene

Related Questions

In a 10.0 L vessel at 100.0 °C, 10.0 grams of an unknown gas exert a pressure of 1.13 atm. What is the gas? Data sheet and Periodic Table a. The gas is NH3 and the molar mass is 17 g.mol-1. b. The gas is NO and the molar mass is 30 g.mol-1 c. The gas is HCN and the molar mass is 27 g.mol-1 d. The gas is NO2 and the molar mass is 46 g.mol-1

Answers

According to the given statement the gas in the vessel is HCN and the molar mass is 27 g.mol-1.

To solve this problem, we need to use the ideal gas law equation, PV=nRT. We know the volume (10.0 L), temperature (100.0 °C = 373 K), pressure (1.13 atm), and we have the molar mass of the unknown gas. We can rearrange the equation to solve for n, the number of moles of gas:
n = PV/RT
Using the given values, we get:
n = (1.13 atm x 10.0 L) / (0.08206 L•atm/mol•K x 373 K)
n = 0.038 mol
Now we can use the mass of the gas (10.0 g) and the number of moles to calculate the molar mass:
molar mass = mass / moles
molar mass = 10.0 g / 0.038 mol
molar mass = 263 g/mol
Comparing this value to the given options, we see that the only gas with a molar mass close to 263 g/mol is HCN, with a molar mass of 27 g/mol. Therefore, the gas in the vessel is HCN.
To know more about ideal gas visit :

https://brainly.com/question/28257995

#SPJ11

The half-reaction at an electrode is Mg2+(molten) 2e Mg(s) Calculate the number Of grams 0f maguesium that can be produced by supplying 2.40 F to the electrode. 12.2

Answers

12.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To calculate the number of grams of magnesium produced, we first need to calculate the number of moles of electrons supplied to the electrode. The half-reaction given shows that 2 moles of electrons are required to produce 1 mole of magnesium. Therefore, we need to know how many moles of electrons are supplied to the electrode.

The unit of measurement for electric charge is Coulombs (C) and the Faraday's constant is a conversion factor that relates electric charge to the number of moles of electrons. The Faraday's constant is equal to 96,485 C/mol e-.

In this case, we are given that 2.40 F (Faradays) of electric charge is supplied to the electrode. To convert Faradays to Coulombs, we can use the equation:

1 F = 96,485 C

Therefore, 2.40 F is equal to:

2.40 F * 96,485 C/F = 231,564 C

Now, we can use the Faraday's constant to calculate the number of moles of electrons as:

231,564 C / 96,485 C/mol e- = 2.4 moles of electrons

Since 2 moles of electrons are required to produce 1 mole of magnesium, we can calculate the number of moles of magnesium produced as:

2.4 moles of electrons / 2 moles of electrons per 1 mole of Mg = 1.2 moles of Mg

Finally, we can convert moles of magnesium to grams using its molar mass which is 24.31 g/mol:

1.2 moles of Mg * 24.31 g/mol = 29.172 g or 29.2 g (rounded to one decimal place)

Therefore, 29.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To learn more about moles of electrons visit:

brainly.com/question/512038

#SPJ11

Place the following elements in order of increasing atomic radius. P BacLBa

Answers

Answer:

P < Bac < LBa

Explanation:

The order of increasing atomic radius is:

P < Bac < LBa

The order of increasing atomic radius for the given elements is:

P < Ba < Cl < B

The atomic radius of an element is defined as half the distance between the nuclei of two identical atoms that are bonded together. As we move down a group in the periodic table, the number of energy levels or shells increases, leading to an increase in the atomic radius. As we move across a period, the atomic radius generally decreases due to the increasing effective nuclear charge, which attracts the electrons more strongly towards the nucleus.

Based on this information, we can order the given elements in increasing atomic radius as follows:

P (Phosphorus) has 15 electrons and is in the third period of the periodic table. It has a smaller atomic radius than the other two elements because it is located to the right of Ba and L in the same period. The trend of decreasing atomic radius as we move across a period is observed here.

Ba (Barium) has 56 electrons and is in the sixth period of the periodic table. It has a larger atomic radius than P because it is located below P in the same group. The trend of increasing atomic radius as we move down a group is observed here.

L (Lanthanum) has 57 electrons and is also in the sixth period of the periodic table. It has the largest atomic radius of the three because it is located below Ba in the same group. Similar to Ba, the trend of increasing atomic radius as we move down a group is observed here.

For more such questions on atomic

https://brainly.com/question/30390726

#SPJ11

119/50 Snis the chemical symbol for Tin. Tin is found in cool stars in its tripley ionized state. How many protons, neutron, and electrons does this ion have in this state?options:119 p, 50 n, 47 e50 p, 119 n, 116 e50 p, 69 n, 47 e50 p, 69 n, 44 e

Answers

The correct option is: 50 p, 69 n, 47 e.

The chemical symbol for Tin is Sn and its atomic number is 50, which means it has 50 protons in its nucleus.

The given ion, Sn3+, means that three electrons have been removed from the neutral atom of Tin. Therefore, the ion would have 50 protons, 69 neutrons (as the mass number is 119, given in the chemical symbol), and 47 electrons. This is because when three electrons are removed from the neutral atom, the ion has a positive charge, which means it has lost three negatively charged electrons and is left with 47 electrons. It is interesting to note that Tin's triple ionization state is found in cool stars, where the temperature is lower than that of the Sun. This shows that different states of ions and different elements can exist in various states in different environments.

The chemical symbol for Tin is represented as 119/50 Sn. In this notation, the number at the bottom (50) indicates the atomic number, which is the number of protons in the nucleus of the atom. The number at the top (119) represents the mass number, which is the sum of protons and neutrons.
In its triply ionized state, Tin has lost three electrons, but the number of protons and neutrons remains the same. To calculate the number of neutrons, subtract the atomic number (protons) from the mass number: 119 - 50 = 69 neutrons.
SO, in its triply ionized state, Tin has 50 protons, 69 neutrons, and 47 electrons (since it has lost 3 electrons).

To know more about tin refer: https://brainly.com/question/31605969?referrer=searchResults

#SPJ11

An insulated piston cylinder device initially contains 0.3 m
3
of carbon dioxide at 200 kPa and 27 ∘
C. An electric switch is turned on, and a 110-V source supplies current to a resistance heater inside the cylinder for a period of 10 min. The pressure is held constant during the process, while the volume is doubled. Determine the current that passes through the resistance heater.

Answers

The current passing through the resistance heater is approximately 0.970 A.

To determine the current passing through the resistance heater, we need to use the energy balance equation:

ΔU = Q - W

where ΔU is the change in internal energy of the system, Q is the heat added to the system, and W is the work done by the system. Since the piston is insulated, there is no heat transfer (Q=0), and the work done is only due to the expansion of the gas against the piston:

W = PΔV

where P is the constant pressure, and ΔV is the change in volume. Therefore, we can simplify the energy balance equation to:

ΔU = -PΔV

Assuming carbon dioxide behaves as an ideal gas, we can use the ideal gas law to determine the initial number of moles of CO2 in the cylinder:

PV = nRT

where P is the initial pressure, V is the initial volume, n is the number of moles, R is the gas constant, and T is the initial temperature. Solving for n, we get:

n = PV/RT

Substituting the given values, we get:

n = (200 kPa)(0.3 m3)/(8.314 kPa⋅L/mol⋅K)(300 K) = 0.036 mol

Since the volume is doubled, the final volume is 2 times the initial volume or 0.6 m3. Using the ideal gas law again, we can determine the final pressure:

P = nRT/V

Substituting the given values, we get:

P = (0.036 mol)(8.314 kPa⋅L/mol⋅K)(300 K)/(0.6 m3) = 110 kPa

Since the pressure is held constant, the work done by the gas is:

W = PΔV = (200 kPa)(0.6 m3 - 0.3 m3) = 60 kJ

The change in internal energy can be determined using the equation:

ΔU = ncVΔT

where cV is the molar-specific heat at constant volume, and ΔT is the temperature change. For carbon dioxide, cV = 0.718 kJ/mol⋅K. The temperature change can be determined using the equation:

PΔV = nRΔT

where R is the gas constant. Substituting the given values, we get:

ΔT = PΔV/nR = (200 kPa)(0.3 m3)/(0.036 mol)(8.314 J/mol⋅K) = 172.4 K

Therefore, the change in internal energy is:

ΔU = (0.036 mol)(0.718 kJ/mol⋅K)(172.4 K) = 4.0 kJ

Finally, we can solve for the heat added to the system using the energy balance equation:

ΔU = Q - W

Substituting the given values, we get:

4.0 kJ = Q - 60 kJ

Q = 64.0 kJ

The electrical energy supplied to the resistance heater can be determined using the equation:

E = IVt

where I is the current, V is the voltage, and t is the time. Substituting the given values, we get:

64.0 kJ = (110 V)I(10 min)(60 s/min) = 66,000 I

Therefore, the current passing through the resistance heater is:

I = 64.0 kJ / 66,000 = 0.970 A (approximately)

To learn more about heaters

https://brainly.com/question/11863285

#SPJ4

Specify the number of possible isomers of nitrobenzoic acid. 6 Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms. Fill in the blank 2 o-nitrobenzoic acid Specify the number of possible isomers of tribromobenzoic acid. 6 Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms. Fill in the blank 4 2,4,6-tribromobenzoic acid

Answers

Nitrobenzoic acid can have a total of 6 possible isomers. One of these isomers is o-nitrobenzoic acid.Tribromobenzoic acid can have a total of 4 possible isomers. One of these isomers is 2,4,6-tribromobenzoic acid.

Isomers are different compounds with the same molecular formula but different arrangements or orientations of atoms. In the case of nitrobenzoic acid, the isomers differ in the position of the nitro (-NO2) group on the benzene ring. The "o-" in o-nitrobenzoic acid indicates that the nitro group is located in the ortho position, which is adjacent to the carboxyl group (-COOH) on the benzene ring.

Similarly, in tribromobenzoic acid, the isomers differ in the position of the bromine (-Br) substituents on the benzene ring. The numbering in 2,4,6-tribromobenzoic acid indicates that the bromine atoms are located in the 2nd, 4th, and 6th positions on the benzene ring.

Overall, these compounds demonstrate the concept of isomerism, where different arrangements of atoms lead to distinct chemical structures and properties.

To learn more about Nitrobenzoic acid click here : brainly.com/question/13142414

#SPJ11

A 3.75-g sample of limestone (caco3) contains 1.80 g of oxygen and 0.450 g of carbon. what is the percent o and the percent c in limestone?

Answers

The percent oxygen in limestone is 48% and the percent carbon is 12%.

To find the percent oxygen and carbon in limestone, we need to use the formula:
% element = (mass of element / total mass of compound) x 100%
First, we need to calculate the mass of calcium in the sample:
Mass of calcium = total mass of compound - mass of oxygen - mass of carbon
Mass of calcium = 3.75 g - 1.80 g - 0.450 g
Mass of calcium = 2.52 g
Now we can calculate the percent oxygen:
% O = (1.80 g / 3.75 g) x 100%
% O = 48%
And the percent carbon:
% C = (0.450 g / 3.75 g) x 100%
% C = 12%
Therefore, the percent oxygen in limestone is 48% and the percent carbon is 12%.
To know more about limestone visit:

https://brainly.com/question/30717890

#SPJ11

The reaction of SnCl2 (aq) with Pt** (aq) in aqueous HCl yields a yellow-orange solution of a 1:1 Pt-Sn compound with a molar absorptivity (E) of 1.3 x 104 M-'cm! What is the absorbance in a cell vith a path length of 1.00 cm of a solution prepared by adding 100 mL of an aqueous solution of 5.2 mg NH.)PtCl. to 100 mL of an aqueous solution of 2.2 mg SnCl2?

Answers

The absorbance of the solution in a cell with a path length of 1.00 cm is 0.754.

To calculate the absorbance, we need to first find the concentration of the 1:1 Pt-Sn compound in the solution.

1. Convert masses of NH3PtCl4 and SnCl2 to moles:

NH3PtCl4: 5.2 mg = 0.0052 g; Molar mass = 267.99 g/mol

Moles of NH3PtCl4 = given weight/  mol. weight

                                = 0.0052 g / 267.99 g/mol

                                = 1.94 x 10^-5 mol

SnCl2: 2.2 mg = 0.0022 g; Molar mass = 189.60 g/mol

Moles of SnCl2 = 0.0022 g / 189.60 g/mol

                          = 1.16 x 10^-5 mol

2. Since it's a 1:1 Pt-Sn compound, the limiting reactant determines the moles of the compound formed.

In this case, SnCl2 is the limiting reactant.

Therefore, 1.16 x 10^-5 mol of the Pt-Sn compound is formed.

3. Calculate the concentration of the Pt-Sn compound:

Total volume of the solution = 100 mL + 100 mL = 200 mL = 0.2 L

Concentration = moles / volume

                        = 1.16 x 10^-5 mol / 0.2 L

                        = 5.8 x 10^-5 M

4. Use the Beer-Lambert law to calculate absorbance (A):

A = ε * c * l

A = 1.3 x 10^4 M^-1cm^-1 * 5.8 x 10^-5 M * 1.00 cm

  = 0.754

To know more about absorbance, click below.

https://brainly.com/question/23897866

#SPJ11

Structure of 2,4,5-Trimethyl-4-(1-methylethyl)heptane​

Answers

The structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be represented as a branched hydrocarbon with a seven-carbon chain. It contains three methyl groups ([tex]CH_{3}[/tex]) attached to carbons 2, 4, and 5, and an isopropyl group ([tex]CH(CH_{3}) _{2}[/tex]) attached to carbon 4.

To draw the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane, we start with a seven-carbon chain. The carbons are numbered consecutively, with the substituents indicated by the numbers. Starting from the main chain, we have three methyl groups (CH_{3}) attached to carbons 2, 4, and 5. This means that there are additional methyl groups branching off from these carbons.

Additionally, at carbon 4, we have an isopropyl group, also known as 1-methylethyl group (CH(CH_{3}) _{2}). The isopropyl group consists of three carbon atoms, with the central carbon attached to two methyl groups. Overall, the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be visualized as a complex, branched hydrocarbon with multiple methyl groups and an isopropyl group attached to a seven-carbon chain.

Learn more about hydrocarbon here: https://brainly.com/question/30666184

#SPJ11

in the electron configuration of inner transition metal pr, the designation of the orbital with the highest energy is ____.4f6p2d7f5s

Answers

In the electron configuration of inner transition metal pr, the designation of the orbital with the highest energy is 5s.

The electron configuration of Pr is [Xe]4f³ 6s², where [Xe] represents the electron configuration of the noble gas xenon. The inner transition metals are characterized by the filling of their f-orbitals, which are located below the d-orbitals in the periodic table.

In Pr, the 4f subshell is partially filled with three electrons, and the 6s subshell is filled with two electrons. Therefore, the orbital with the highest energy is the next available orbital after 6s, which is 5p.

However, the given electron configuration includes only up to 5s, indicating that 5s is the highest energy orbital present in the configuration.

To know more about electron configuration, refer here:

https://brainly.com/question/31812229#

#SPJ11

Determine if each of the following complexes exhibits geometric isomerism. If geometric isomers exist, determine how many there are. (Hint: [Cu(NH3)4]2+ is square-planar).
No isomers, two isomers, three isomers:
[Rh(bipy)(o−phen 2]3+
[Cu(NH3)4]2+
[Co(NH3)3(bipy)Br]2+

Answers

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$[/tex] is the complex that exhibits two geometric isomers.

[tex][Rh(bipy)(o-phen)$_2$]$^{3+}$:[/tex]

This complex has a square planar geometry due to the presence of two bidentate ligands, bipy and o-phen. Thus, it does not exhibit geometric isomerism.

[tex][Cu(NH$_3$)$_4$]$^{2+}$:[/tex]

This complex has a square planar geometry due to the presence of four ammonia ligands. Square planar complexes exhibit geometric isomerism when two identical ligands are positioned opposite to each other, which is not possible in this case since all four ligands are the same. Therefore, this complex does not exhibit geometric isomerism.

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$:[/tex]

This complex has a tetrahedral geometry due to the presence of three ammonia ligands and one bipy ligand. Tetrahedral complexes exhibit geometric isomerism when two identical ligands are positioned across each other. In this case, the bipy ligand and the bromide ion can potentially be positioned across from each other, resulting in two possible isomers: a cis isomer and a trans isomer.

Learn more about geometric isomers here:

https://brainly.com/question/31744339

#SPJ11

Two atoms of cesium (Cs) can form a Cs molecule. The equilibrium distance between the nuclei in a molecule is 0.447 Calculate th…
Two atoms of cesium (Cs) can form a Cs molecule. The equilibrium distance between the nuclei in a molecule is 0.447 Calculate the moment of inertia about an axis through the center of mass of the two nuclei and perpendicular to the line joining them. The mass of a cesium atom is 2.2 .

Answers

The moment of inertia about an axis through the center of mass of the two nuclei and perpendicular to the line joining them is 0.223 kg⋅m².

To calculate the moment of inertia, we need to use the formula:

I = μr²

where I is the moment of inertia, μ is the reduced mass, and r is the distance between the two nuclei.

First, we need to calculate the reduced mass:

μ = m₁m₂ / (m₁ + m₂)

where m₁ and m₂ are the masses of the two Cs atoms.

Since we have two Cs atoms, the mass of each is 2.2, so we have:

μ = (2.2)(2.2) / (2.2 + 2.2) = 1.1

Now we can calculate the moment of inertia:

I = (1.1) (0.447)²

 = 0.223 kg⋅m²

To know more about the moment of inertia, click below.

https://brainly.com/question/15246709

#SPJ11

2mno4 - (aq) 16h (aq) 5sn2 (aq) 2mno2 - (aq) 8h2o(aq) 5sn4 (aq), the oxidation number of mn changes from ___ to ___.

Answers

In the given chemical equation:

2MnO4^-(aq) + 16H^+(aq) + 5Sn^2+(aq) → 2MnO2^-(aq) + 8H2O(aq) + 5Sn^4+(aq) The oxidation number of manganese (Mn) changes from +7 in MnO4^- to +4 in MnO2^-.

MnO4^- is a polyatomic ion known as permanganate ion, which has a charge of -1. The total charge on the ion is balanced by the sum of the oxidation states of its constituent atoms. Since there are four oxygen atoms with an oxidation state of -2 each, the oxidation state of Mn in MnO4^- can be calculated as follows:

-1 = oxidation state of Mn + (-2) x 4

-1 = oxidation state of Mn - 8

oxidation state of Mn = +7

Similarly, MnO2^- is a polyatomic ion known as manganate ion, which has a charge of -2. The total charge on the ion is balanced by the sum of the oxidation states of its constituent atoms. Since there are two oxygen atoms with an oxidation state of -2 each, the oxidation state of Mn in MnO2^- can be calculated as follows:

-2 = oxidation state of Mn + (-2) x 2

-2 = oxidation state of Mn - 4

oxidation state of Mn = +4

Therefore, the oxidation number of manganese changes from +7 in MnO4^- to +4 in MnO2^- in the given chemical equation.

To know more about chemical equation refer here

https://brainly.com/question/30087623#

#SPJ11

draw the epoxide and organometallic reagent needed to synthesize the following alcohol. indicate stereochemistry where appropriate.

Answers

Synthesizing alcohols from epoxides and organometallic reagents involves the opening of the epoxide ring by the organometallic reagent, resulting in the formation of a diol. The stereochemistry of the product depends on the starting materials and reaction conditions.

Epoxides are three-membered cyclic ethers that contain a ring of two carbon atoms and one oxygen atom. They are highly reactive due to the ring strain and the electron-rich oxygen atom, making them useful intermediates in organic synthesis.

Organometallic reagents are compounds that contain a metal atom covalently bonded to a carbon atom, which is usually an alkyl or aryl group. Common examples include Grignard reagents, which are formed by reacting an alkyl or aryl halide with magnesium metal in the presence of an ether solvent.

To synthesize alcohol from an epoxide and an organometallic reagent, the epoxide is first opened by the nucleophilic attack of the organometallic reagent on the less hindered carbon atom of the epoxide ring. This results in the formation of a new carbon-carbon bond and the opening of the ring, leading to the formation of a diol.

The stereochemistry of the product depends on the stereochemistry of the starting materials and the reaction conditions. If the organometallic reagent is chiral and reacts with the epoxide in a stereospecific manner, then the product will have a specific stereochemistry. However, if the reaction is not stereospecific, then the stereochemistry of the product will be a mixture of isomers.

To learn more about organometallic reagents

https://brainly.com/question/29980092

#SPJ4

given this reaction: 2nh3(g)<--->n2(g) 3h2(g) where delta g rxn= 16.4kj/mol; delta h rxn=91.8 kj/mol. the standard molar enthalpy of formation in KJmol −1 of NH3​ (g) is

Answers

The standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.

The standard molar enthalpy of formation of NH3(g) can be calculated using the given values of delta G_rxn and delta H_rxn for the reaction 2NH3(g) <---> N2(g) + 3H2(g).

Using the relation ΔG = ΔH - TΔS, we can first calculate the standard molar entropy change (ΔS) for the reaction. Given that ΔG_rxn = 16.4 kJ/mol and ΔH_rxn = 91.8 kJ/mol, we can rearrange the equation to ΔS = (ΔH - ΔG)/T. Assuming standard conditions (T = 298.15 K), we can calculate ΔS as:

ΔS = (91.8 kJ/mol - 16.4 kJ/mol) / 298.15 K = 0.253 kJ/mol*K

Now, we can use the standard entropy change to calculate the standard molar enthalpy of formation for NH3(g). For the given reaction, the change in the number of moles of gas is:

Δn_gas = 3 - 2 = 1

The standard molar enthalpy of formation of NH3(g) can be expressed as:

ΔH_formation(NH3) = ΔH_rxn / 2 - Δn_gas * R * T * ΔS

Using the given values and the gas constant R = 8.314 J/mol*K, we can calculate the standard molar enthalpy of formation for NH3(g) as:

ΔH_formation(NH3) = (91.8 kJ/mol) / 2 - 1 * (8.314 J/mol*K) * 298.15 K * (0.253 kJ/mol*K) = 45.9 kJ/mol

Therefore, the standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.

Know more about Standard molar enthalpy of formation here:

https://brainly.com/question/10583725

#SPJ11

What is the molar solubility of AgCl in 0.10 M NaCN if thecolorless complex ion Ag(CN)2- forms? Ksp for AgCl is 1.8 x 10^-10and Kf for Ag(CN)2- is 1.0 x 10^21.
For the right answer I will leave maximum feedback. Need itfast, thanks.
The options are: .a. 20Mb. 40Mc. 50Md. 10M

Answers

The molar solubility of AgCl in 0.10 M NaCN is c. 50 M.

The formation of Ag(CN)₂⁻complex ion reduces the concentration of Ag+ ions available to form AgCl precipitate, thus increasing the solubility of AgCl. Using the equilibrium constants for the dissolution of AgCl and the formation of Ag(CN)₂⁻ complex, we can calculate the molar solubility of AgCl in the presence of NaCN. The molar solubility is found to be 50 M, which is option C.

It is important to note that the high stability constant of Ag(CN)₂⁻compared to the low solubility product constant of AgCl leads to the formation of the complex ion and hence increased solubility of AgCl in the presence of NaCN.

Therefore, the correction option is c. 50 M.

To learn more about molar solubility here

https://brainly.com/question/28170449

#SPJ4

For the reaction 2A + 3B ® 4C + 5D, the rate of the reaction in terms of DA would be written as ________?

Answers

The main answer to this question is that the rate of the reaction in terms of DA would be written as -1/5(d[DA]/dt) = k[A]²[B]³, where k is the rate constant, [A] and [B] are the concentrations of A and B, and d[DA]/dt is the rate of change of the concentration of DA over time.

The explanation for this answer is that DA is a product of the reaction, so its rate of change can be expressed in terms of the rate of the reaction using stoichiometry. Since 5 moles of D are produced for every 2 moles of A consumed, the rate of the reaction in terms of DA can be written as -1/5(d[DA]/dt) = d[D]/dt = 4(d[C]/dt) + 5(d[D]/dt) = 4k[A]²[B]³ + 5(d[DA]/dt), where d[D]/dt is the rate of change of the concentration of D over time, and d[C]/dt is the rate of change of the concentration of C over time. By rearranging this equation and solving for d[DA]/dt, we can obtain the main answer given above.

For more information on stoichiometry visit:

https://brainly.com/question/30215297

#SPJ11

A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?259 K586 K134 K189.5 K306 K

Answers

The temperature if the volume is increased to 553 mL at 305 torr will be  189.5 K.

To solve this problem, we can use the combined gas law equation, which relates the initial and final conditions of pressure, volume, and temperature. The equation is as follows:

(P1V1/T1) = (P2V2/T2)

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial conditions are:

P1 = 2.09 atm
V1 = 321 mL
T1 = 300 K

We are also given that the final conditions are:

P2 = 305 torr (which we need to convert to atm)
V2 = 553 mL

To convert torr to atm, we divide by 760 torr/atm:

305 torr ÷ 760 torr/atm = 0.4013 atm

Substituting the values into the equation, we get:

(2.09 atm)(321 mL)/(300 K) = (0.4013 atm)(553 mL)/(T2)

Simplifying the equation, we get:

T2 = (0.4013 atm)(553 mL)(300 K)/(2.09 atm)(321 mL) = 189.5 K

Therefore, the final temperature is 189.5 K.

The question could be rephrased as:

A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?

1. 259 K

2. 586 K

3. 134 K

4. 189.5 K

5. 306 K

Learn more about gas law at: https://brainly.com/question/27870704

#SPJ11

What carboxylic acid and alcohol are needed to synthesize benzyl acetate?

Answers

Acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

To synthesize benzyl acetate, you will need the carboxylic acid , acetic acid and the alcohol benzyl alcohol. Here's a step-by-step explanation:

1. Identify the carboxylic acid: Acetic acid (CH3COOH) is required for this synthesis. It contains a carboxyl group (COOH) that will react with the alcohol.

2. Identify the alcohol: Benzyl alcohol (C6H5CH2OH) is needed. It contains a hydroxyl group (OH) that will react with the carboxylic acid.

3. Perform the esterification reaction: Combine acetic acid and benzyl alcohol in the presence of an acid catalyst (such as sulfuric acid) to form benzyl acetate (C6H5CH2OOCCH3) and water as a byproduct.

In summary, acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

Learn more about carboxylic acid here,

https://brainly.com/question/26855500

#SPJ11

consider the reaction of 25.0 ml of 0.20 m agno3 (aq) with 25.0 ml of 0.20 m nabr (aq) to form agbr (s) at 25 °c. what is δg for this reaction in kj mol-1? ksp for agbr is 5.0 ´ 10-13 at 25 °c.

Answers

The Gibbs free energy change for the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s) at 25°C is -6.7 kJ/mol.

The Gibbs free energy change (ΔG) for a reaction at constant temperature and pressure is given by the equation:

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, T is the absolute temperature, and ΔS is the entropy change. For the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s), the net ionic equation is:

Ag+(aq) + Br-(aq) → AgBr(s)

The reaction involves the formation of a solid AgBr, which means that it is a precipitation reaction. Therefore, the Gibbs free energy change can be calculated using the solubility product constant (Ksp) of AgBr at 25°C, which is 5.0 × 10^-13:

Ksp = [Ag+][Br-] = [AgBr]

where [Ag+] and [Br-] are the equilibrium concentrations of Ag+ and Br- ions, respectively, and [AgBr] is the equilibrium concentration of solid AgBr.

In this case, the initial concentration of both AgNO3 and NaBr is 0.20 M, and after mixing, the final volume of the solution is 50.0 ml. Therefore, the concentration of Ag+ and Br- ions in the mixed solution is:

[Ag+] = [Br-] = (0.20 M × 25.0 ml)/50.0 ml = 0.10 M

Substituting the values into the Ksp equation, we get:

Ksp = [Ag+][Br-] = (0.10 M)2 = 1.0 × 10^-2

Since the reaction quotient Q = [Ag+][Br-] is greater than Ksp, solid AgBr will form and the reaction will proceed spontaneously in the forward direction.

The Gibbs free energy change for this reaction can be calculated using the equation:

ΔG = -RTln(Q)

where R is the gas constant, T is the temperature in Kelvin, and ln(Q) is the natural logarithm of the reaction quotient.

Substituting the values, we get:

ΔG = -8.314 J/mol.K × (298 K) × ln(0.10)2 = -6.7 kJ/mol

Therefore, the Gibbs free energy change for the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s) at 25°C is -6.7 kJ/mol. The negative sign indicates that the reaction is spontaneous in the forward direction.

Know more about Gibbs free energy here:

https://brainly.com/question/9179942

#SPJ11

for each of the metabolic transformations (a) through (d), determine whether the compound on the left has undergone oxidation or reduction. balance each transformation by inserting

Answers



Metabolic transformations involve the conversion of one compound into another through a series of chemical reactions.

In order to determine whether a compound has undergone oxidation or reduction, we need to look at the changes in the oxidation state of the atoms involved.



Oxidation is the loss of electrons or an increase in oxidation state, while reduction is the gain of electrons or a decrease in oxidation state.



(a) Compound on the left: C3H8O. This compound has been transformed into C3H6O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation, as hydrogen is a reducing agent.



The balanced transformation is: C3H8O -> C3H6O + 2H+ + 2e-.



(b) Compound on the left: CH3CHO. This compound has been transformed into CH3COOH through the addition of an oxygen atom and the loss of two hydrogen atoms.

This increase in the number of oxygen atoms and the loss of hydrogen atoms are indications of oxidation.



The balanced transformation is: CH3CHO + H2O + O2 -> CH3COOH + H2O.



(c) Compound on the left: C6H12O6. This compound has been transformed into C2H5OH and CO2 through the loss of hydrogen atoms and the gain of oxygen atoms.

The loss of hydrogen atoms is a clear indication of oxidation, while the gain of oxygen atoms is a clear indication of reduction.



The balanced transformation is: C6H12O6 -> 2C2H5OH + 2CO2.



(d) Compound on the left: C5H12O. This compound has been transformed into C5H10O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation.



The balanced transformation is: C5H12O -> C5H10O + 2H+ + 2e-.



In summary, for the metabolic transformations (a) through (d), the compound on the left has undergone oxidation in all cases except for transformation (c), where it has undergone both oxidation and reduction.

By balancing each transformation, we can see that these reactions involve the transfer of electrons, which is a key feature of oxidation-reduction reactions.

To know more about Metabolic transformations refer here

https://brainly.com/question/31681301#

#SPJ11

A gauge pressure is measuring 4. 66 atm of pressure inside a basketball. What is the absolute pressure inside the basketball?

Answers

The absolute pressure inside the basketball can be calculated by adding the atmospheric pressure to the gauge pressure. Atmospheric pressure is typically around 1 atm at sea level.

Therefore, the absolute pressure inside the basketball can be calculated as the sum of the gauge pressure and the atmospheric pressure.

In this case, the gauge pressure is given as 4.66 atm. Assuming atmospheric pressure is 1 atm, the absolute pressure inside the basketball would be:

Absolute pressure = Gauge pressure + Atmospheric pressure

Absolute pressure = 4.66 atm + 1 atm

Absolute pressure = 5.66 atm

Therefore, the absolute pressure inside the basketball is 5.66 atm. This represents the total pressure exerted by the gas inside the basketball, including both the gauge pressure and the atmospheric pressure.

To learn more about absolute pressure click here :

brainly.com/question/13390708

#SPJ11

estimate the magnitude of the coefficient of viscosity η of argon gas at 25°c and 1 atmosphere pressure.

Answers

The estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To estimate the coefficient of viscosity (η) of argon gas at 25°C and 1 atmosphere pressure, you can use Sutherland's formula:

η = (CT^(3/2)) / (T + S)

where:
η is the coefficient of viscosity,
C is the Sutherland constant for argon (1.458 x 10^(-6) kg/m·s·K^(1/2)),
T is the temperature in Kelvin (25°C = 298.15K), and
S is the Sutherland temperature for argon (92.3K).

Plug in the values:

η = (1.458 x 10^(-6) * (298.15^(3/2))) / (298.15 + 92.3)

After calculating, you will find that:

η ≈ 2.21 x 10^(-5) kg/m·s

So, the estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To learn more about argon, refer below:

https://brainly.com/question/133359

#SPJ11

Describe briefly carbon dioxide capture or other carbon minimization or mitigation strategies for: a) Large-scale point sources such as fossil-fuel-fired electricity generation plant and industrial and institutional boilers or heating systems; b) Small-scale point sources such as fossil-fuel-fired home heating systems; c) Mobile transportation sources such as fossil-fueled cars and trucks. Within each category (a-c) describe, compare, and contrast the various capture/minimization/mitigation strategies you have outlined from several points of view including for example the state of development of the technology, capture efficiency, practicality, economics, etc.

Answers

Large-scale point sources such as fossil-fuel-fired electricity generation plant and industrial and institutional boilers or heating systems:

Carbon dioxide capture from large-scale point sources involves the separation and capture of CO2 from the flue gas emissions produced during the combustion of fossil fuels. Several capture technologies have been developed, including post-combustion, pre-combustion, and oxy-combustion.Post-combustion capture involves the separation of CO2 from the flue gas emissions after combustion has occurred. This is typically achieved through the use of solvents or membranes. Post-combustion capture is the most mature technology, and several large-scale facilities are already in operation. However, it can be energy-intensive and expensive, which can limit its widespread adoption.

To know more about adoption visit :

https://brainly.com/question/31173452

#SPJ11

Before you leave you need to make sure your team has enough water for everyone due to that intentionality of your journey everyone is here unexpectedly and you only have 12 empty soda cans and 150 gallon water container for the back of the Jeep you have to make sure to measure out enough water for seven day journey

Answers

To ensure that there is enough water for everyone during the seven-day journey, we need to calculate the amount of water required per person per day and then multiply it by the number of people and the number of days.

Let's assume there are "n" people in the group.

The total water required for one person per day can vary depending on factors like climate, activity level, and individual needs. On average, a person needs about 2-3 liters of water per day to stay properly hydrated.

Let's take the middle range of 2.5 liters per person per day. Multiply this by the number of people (n) to get the total water required per day for the group.

Total water required per day = 2.5 liters/person/day * n people

Now, multiply the total water required per day by the number of days (7) to get the total water required for the entire journey.

Total water required for the journey = Total water required per day * number of days

Once you have the total water required for the journey, you can check if the 150-gallon water container is sufficient.

1 gallon is equivalent to approximately 3.785 liters. Therefore, the 150-gallon water container can hold:

150 gallons * 3.785 liters/gallon = 567.75 liters

Compare the total water required for the journey with the capacity of the 150-gallon water container. If the container can hold more water than what is required, you have enough water for the journey. Otherwise, you may need to consider additional water sources or containers.

As for the 12 empty soda cans, they are not a suitable option for storing water for a journey of this length and number of people. They are not designed for long-term storage or transportation of water and may not provide an adequate volume of water. It is recommended to use appropriate water containers or bottles for storing water during the journey.

To learn more about water click here:

brainly.com/question/32195714

#SPJ11

write the formula for a complex formed between ni2 and cn− with a coordination number of 4

Answers

The formula for the complex formed between Ni2+ and CN- with a coordination number of 4 is [Ni(CN)4]2-.
In this complex, Ni2+ ion acts as the central metal ion and four CN- ions act as ligands.

Each CN- ion donates one electron pair to the central Ni2+ ion forming four coordinate covalent bonds. The resulting complex has a tetrahedral geometry with a coordination number of 4.The negative charge on the complex ion is due to the presence of two extra electrons on the complex as a result of the coordination of four CN- ligands. The overall charge of the complex ion is balanced by the 2- charge on the complex ion.
 

In this complex, Ni²⁺ is the central metal ion, and CN⁻ is the ligand. The coordination number of 4 indicates that there are four CN⁻ ligands attached to the Ni²⁺ ion.To write the formula, you enclose the central metal ion and the ligands in square brackets, followed by the overall charge of the complex. In this case, Ni²⁺ has a +2 charge, and there are four CN⁻ ligands with a -1 charge each. Thus, the overall charge of the complex is 2 - 4 = -2, and the formula is [Ni(CN)₄]²⁻.

To know more about metal visit:

https://brainly.com/question/29400906

#SPJ11

Consider the following chemistry equation: 2C2H6 + 7O2 --> 6H2O + 4CO2



How many grams of water can be produced from 13. 5 grams of C2H6?



24. 3 grams H2O


2. 70 grams H2O


67. 5 grams H2O


47. 1 grams H2O



Consider the following chemical reaction:


H2 + O2 --> H2O


How many liters of oxygen gas is needed to produce 2. 73 liters of water vapor?


22. 4 liters O2


30. 6 liters O2


5. 46 liters O2


1. 37 liters O2

Answers

For the first equation, 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex]. For the second equation, 5.46 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

In the first equation, the balanced chemical equation shows that 2 moles of [tex]C_2H_6[/tex]can produce 6 moles of [tex]H_2O[/tex]. To calculate the number of moles of water produced, we need to convert grams of [tex]C_2H_6[/tex] to moles using its molar mass. The molar mass of [tex]C_2H_6[/tex] is 30.07 g/mol. Therefore, 13.5 grams of [tex]C_2H_6[/tex] is equal to 13.5 g / 30.07 g/mol = 0.449 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of water produced. Since the mole ratio of [tex]C_2H_6[/tex] to [tex]H_2O[/tex]is 2:6, we multiply the number of moles of [tex]C_2H_6[/tex] by the ratio: 0.449 mol * (6/2) = 1.347 mol.

To convert moles of water to grams, we use the molar mass of [tex]H_2O[/tex], which is 18.015 g/mol. Therefore, 1.347 mol * 18.015 g/mol = 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex].

For the second equation, the mole ratio between [tex]O_2[/tex] and [tex]H_2O[/tex] is 1:2 based on the balanced chemical equation. Since we have 2.73 litres of water vapour, we need to determine the number of moles of water vapour.

To convert litres of water vapour to moles, we use the ideal gas law: PV = nRT. Assuming standard temperature and pressure (STP), the volume can be directly converted to moles. Therefore, 2.73 litres of water vapour is equal to 2.73 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of oxygen gas needed. Since the mole ratio of [tex]O_2[/tex] to [tex]H_2O[/tex] is 1:2, we multiply the number of moles of water vapour by the ratio: 2.73 mol * (1/2) = 1.365 mol.

As the question asks for the volume of oxygen gas in litres, we do not need to convert moles to grams. Therefore, 1.365 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

Learn more about molar mass here:

https://brainly.com/question/31545539

#SPJ11

how many of the following three choices have tetrahedral electron geometry?HCNClF3ClO4-a. 0b. 1c. 2d. 3

Answers

ClO4 have tetrahedral electron geometry, To determine the electron geometry of a molecule, we need to first determine its molecular geometry by considering the arrangement of the atoms and lone pairs around the central atom.

The correct option is :- (B)

If the arrangement is tetrahedral, then the electron geometry is also tetrahedral.

HCN: The central atom is carbon, which has three groups bonded to it (one hydrogen, one carbon, and one nitrogen) and no lone pairs. The molecular geometry is therefore trigonal planar, not tetrahedral.

ClF3: The central atom is chlorine, which has three fluorine atoms bonded to it and two lone pairs. The arrangement is trigonal bipyramidal, and the molecular geometry is T-shaped, not tetrahedral.

ClO4-: The central atom is chlorine, which has four oxygen atoms bonded to it and no lone pairs. The arrangement is tetrahedral, and so is the molecular geometry. Therefore, only one of the three choices, ClO4-, has a tetrahedral electron geometry.

To know more about tetrahedral refer here :-

https://brainly.com/question/18612295#

#SPJ11

what is the balanced chemical reaction that catalase regulates

Answers

Catalase is an enzyme that regulates the decomposition of hydrogen peroxide into water and oxygen. The balanced chemical equation for this reaction is:

2 H2O2 → 2 H2O + O2

In this reaction, two molecules of hydrogen peroxide (H2O2) react to form two molecules of water (H2O) and one molecule of oxygen gas (O2). This reaction is highly exothermic, releasing a large amount of energy in the form of heat and light.

Without the presence of catalase, this reaction would occur spontaneously and release a significant amount of harmful reactive oxygen species (ROS) that could damage the cell and its components.

Catalase plays a critical role in regulating this reaction by catalyzing the breakdown of hydrogen peroxide into water and oxygen. The catalytic activity of catalase allows it to significantly increase the rate of the reaction, while at the same time reducing the harmful effects of the ROS produced during the reaction.

Specifically, catalase converts the highly reactive hydrogen peroxide molecules into water and oxygen gas through a two-step process.

In the first step, catalase binds to a molecule of hydrogen peroxide, causing it to break down into a molecule of water and an oxygen molecule that is bound to the enzyme. In the second step, the bound oxygen molecule is released from the enzyme, allowing it to react with another molecule of hydrogen peroxide and continue the cycle.

Overall, the catalytic activity of catalase allows it to efficiently and safely regulate the decomposition of hydrogen peroxide into water and oxygen gas, preventing the accumulation of harmful ROS and protecting the cell from oxidative damage.

To know more about decomposition refer here

https://brainly.com/question/8009068#

#SPJ11

complete and balance the following half-reaction: o2(g)→h2o(l) (basic solution)o2(g)→h2o(l) (basic solution) express your answer as a chemical equation. identify all of the phases in your ans

Answers

The complete and balance the half-reaction O₂(g) → H₂O(l) is O₂(g) + 4OH⁻(aq) + 4e⁻ → 2H₂O(l).

The half-reaction for the reduction of oxygen gas (O₂) to water (H₂O) in basic solution is:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

To balance this half-reaction, we need to add four hydroxide ions (OH⁻) to the left-hand side to balance the four electrons:

O₂(g) + 4OH-(aq) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Next, we can cancel out the four OH⁻ ions on both sides of the equation:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Finally, we can write the balanced half-reaction as a chemical equation, including all the phases:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Overall, the balanced equation for the reaction of oxygen gas with water in basic solution would be:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq) (reduction half-reaction)

2H₂O(l) -> O₂(g) + 4H⁺(aq) + 4e⁻ (oxidation half-reaction)

2H₂O(l) -> O₂(g) + 4H⁺(aq) + 4OH⁻(aq) (balanced equation)

Learn more about half-reaction: https://brainly.com/question/10668307

#SPJ11

Other Questions
machine learning can help you identify patterns without even really knowing what you are looking for. a) true. b) false. what is an advantage of using the lac regulatory region to control the expression of exogenous proteins in bacterial cells? true or false. every country in the world must follow the international accounting standards. a. true b. false All of the following are true about the Truman doctrine except that it ... to President Eisenhower in 1961 the greatest danger to the United States was. In PQR, sin P = 0.4, sin R = 0.8 and r = 10. Find the length of p The declaration of an STL vector doubleVec that can hold values of type double, one writes ________. One of the authors received a credit card bill for $2,559, but it included a charge of $1,825 thvalues of the absolute and relative errors.The value of the absolute error is $The value of the relative error is%. (Round to the nearest integer as needed) to protect switches from misconfiguration, we use spanning tree protocol (stp). however, if stp fails, what issue can occur in a network? An electron travels at a constant speed of 3.40 10^6 m/s towards the left. It then enters a uniform magnetic field and experiences a maximum force of 4.65 10^-8 N that points towards the top of this page.a) What is the magnitude of the magnetic field?b) What is the direction of the magnetic field? You created a scatterplot in Tableau that contains plotted data points showing the number of class periods attended for a course vs. the grade assigned for students. You are trying to see if there is a positive relationship between the two. Which feature / function will best aid you in this? Using the sorting feature in the toolbar Changing the diagram to a box-and-whisker Dragging the field for grade to size Opening the raw data supporting the chart Adding trend lines to the scatterplot TRUE/FALSE.The purpose of the whirling dervish dance is to be able to be present and centered and reach a state of divine awareness of positive thought, tolerance, and universal love. Given the following partial class definitions: public class Book implements Comparable t // code for class public class Dictionary extends Book t // code for class Which declaration will result in a compiler error? Comparable c - new Dictionary0: Book b- new Book0: Book b new Dictionary 0: if a bond is quoted in the newspaper at 72.0, what is its price? (round your answer to 2 decimal places.) multiple choice $1,000.00 $72.00 $720.00 $1,072.00 $7.20 1. Assume that the cross-price elasticity of demand for good X with respect to the price of good Y is 0.2. Based on this, we can say that goods X and Y are ___?Complementary goodsIndependent goodsBoth inferior goodsSubstitute goods "Of the following activities or assignments completed by students, which is the least appropriate to consider a performance assessment?A. Figuring out how to implement a recycling program at schoolB. Writing a poem about springC. Filling in a worksheet on multiplicationD. Conducting an experiment about temperature changes" What volume in liters of H2 gas would be produced by the complete reaction of 2.93 g of Al solid at STP according to the following reaction? Remember 1 mol of an ideal gas has a volume of 22.4 L at STP. 2 Al(s) + 6 HCI (aq) 2 AICI: (aq) + 3 H2 (9) whats the end behavior of -x^2-2x+3 FILL IN THE BLANK modern seatbelts have locking mechanisms that are triggered by _______ movement or ________ movement. consider the series [infinity] n (n 1)! n = 1 . (a) find the partial sums s1, s2, s3, and s4. do you recognize the denominators The d-d transition in [Ti(H2O)6]3+(aq) produces an absoption maximum at 500 nm. What is the magnitude of DELTA for this complex in kJ/mol?HINT: E=h v and c =LAMBDA vEnter answer using 3 sig figs, doNOT include decimal point