Given l ∥ m ∥ n, find the value of x.
(4x+19)° (6x+7)°

Sylvia's dad bought [tex]2\frac{2}{3}[/tex] pounds of potatoes for the thanksgiving meal using division and multiplication.

One of the four fundamental mathematical processes, along with addition, subtraction, and multiplication, is division. Division is the process of dividing a larger group into smaller groups so that each group contains an equal amount of items. It is a mathematical procedure used for equal distribution and equal grouping. Repetitive subtraction is the procedure of division. It is the multiplying operation's opposite. It is described as the process of creating equitable organizations. When dividing numbers, we break a bigger number down into smaller ones so that the larger number taken will be equal to the multiplication of the smaller numbers.

In this question,

1 bag of potatoes= 1/3 pounds

8 bags of potatoes= 8* 1/3

                               =8/3

                             =  [tex]2\frac{2}{3}[/tex] pounds

To know more about division, visit

https://brainly.com/question/21416852

#SPJ1

The total amount after forty years with interest compounded every twenty years is ₹ 56,444.61 and the total interest earned is ₹ 6,444.61.

To find the total amount and total interest after forty years with interest compounded every twenty years, we can use the formula of compound interest

A = P(1 + r/n)^(nt)

Where

A = total amount

P = principal amount = ₹50,000

r = annual interest rate = 0.5%

n = number of times interest is compounded per year = 1 (compounded every 20 years)

t = time in years = 40

Using this formula, we can calculate the total amount and total interest as follows

Total amount = P(1 + r/n)^(nt) = 50000(1 + 0.005/1)^(12) * (1 + 0.005/1)^(12) = ₹ 56,444.61

Total interest = Total amount - Principal = ₹ 56,444.61 - ₹ 50,000 = ₹ 6,444.61

Learn more about compound interest here

brainly.com/question/21270833

#SPJ4

The answer of the given question based on finding the missing length of a triangle the answer is , None of the answer choices match this value exactly, but the closest one is D) 15. Therefore, the answer is D) 15.

In geometry,  triangle is  two-dimensional polygon with three straight sides and three angles. It is one of  basic shapes in geometry and can be defined as  closed figure with three line segments as its sides, where each side is connected to two endpoints called vertices. The sum of  interior angles of  triangle are 180° degrees.

Triangles are classified based on length of their sides and  measure of their angles. A triangle can be equilateral, isosceles, or scalene based on whether all sides are equal, two sides are equal, or all sides are different, respectively.

To find the missing length indicated, we can use the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the lengths of the two legs (the sides adjacent to the right angle) is equal to the square of the length of the hypotenuse (the side opposite the right angle).

In this triangle, we can see that the two legs have lengths of 9 and 16, and the hypotenuse has length X. So we can write:

9²+ 16² = X²

Simplifying the left-hand side:

81 + 256 = X²

337 = X²

Taking the square root of both sides (and remembering that X must be positive, since it is a length):

X = sqrt(337)

X ≈ 18.3575

So the missing length indicated is approximately 18.3575. None of the answer choices match this value exactly, but the closest one is D) 15. Therefore, the answer is D) 15.

To know more about Pythagorean theorem visit:

https://brainly.com/question/14930619

#SPJ1

The poles of the function F(s) are -2 and 0, both of which are real and negative. Therefore, the poles can be expressed in radians per second as -2.000 and 0.000.

To find the poles of the function F(s), we need to find the values of s that make the denominator equal to zero. So we need to solve the equation:

s(s+2)² = 0

The solutions to this equation are:

s = 0 (double pole)

s = -2 (double pole)

Therefore, the poles of the function F(s) are -2 and 0, both of which are real and negative. So the poles can be expressed in radians per second as:

-2.000

0.000

(Note that the poles are not specified in units of radians per second, but the values are the same whether or not we include the units.)

Learn more about radians here: brainly.com/question/7721249

#SPJ4

The volume of the solid rounded to the nearest whole number is approximately 262 cubic units.

If we rotate a semicircle about its diameter, we get a solid called a hemisphere. The volume of a hemisphere is given by the formula:

V = (2/3)πr³

where r is the radius of the hemisphere.

In this case, the diameter of the semicircle is given as 10, so the radius is half of that, i.e., r = 5. Substituting this value in the formula, we get:

V = (2/3)π(5)³

= (2/3)π(125)

= 250π/3

≈ 261.8

What is the area and volume of hemisphere?

The curved surface area of a hemisphere = 2r² square units. The total surface area of a hemisphere = 3r² square units. The volume of a hemisphere is determined by the formula (⅔)r cubic units.

To know more about the Volume visit:

https://brainly.com/question/15861918

#SPJ1

Answer:

4/3 or d

Step-by-step explanation:

To find:-

Answer :-

Perimeter: Perimeter is simply the sum of all the side lengths of a figure. Here it is a trapezium so the perimeter would be the sum of all the four sides.

According to the given question , the expressions of the side lengths are , 2x , y , 3x and y .

So the perimeter would be the sum of these four expressions as ,

P = 2x + y + 3x + y

Group like terms ,

P = 2x + 3x + y + y

Add like terms ,

P = 5x + 2y

Also the unit here is centimetres, so the perimeter would be (5x + 2y)cm .

Therefore, the required formula for perimeter is ,

P = (5x + 2y) cm

and we are done!

Answer:

[tex]P=(5x+2y)\; \sf cm[/tex]

Step-by-step explanation:

The perimeter of a two-dimensional shape is the distance all the way around the outside. Therefore, the perimeter of a trapezium is the sum of its side lengths.

From inspection of the given diagram, the side lengths of the trapezium are:

Therefore, the formula for its perimeter, P, in terms of x and y is:

[tex]\implies P=2x+y+3x+y[/tex]

Simplify by collecting like terms:

[tex]\begin{aligned}\implies P&=2x+y+3x+y\\&=2x+3x+y+y\\&=5x+2y\\\end{aligned}[/tex]

Therefore, the formula, in terms of x and y, for P in its simplest form is:

[tex]P=(5x+2y)\; \sf cm[/tex]

Answer:

A. For g(x) to be differentiable, the derivative of g(x) must exist at every point in its domain. The derivative of a sin x + b is a cos x, which exists for all values of x. Therefore, any values of a and b will make g(x) a differentiable function.

B. To find the equation of the tangent line to g(x) at x = 2π, we need to find the slope of the tangent line, which is the derivative of g(x) evaluated at x = 2π.

g'(x) = a cos x, so g'(2π) = a cos(2π) = a

Therefore, the slope of the tangent line at x = 2π is a. To find the y-intercept of the tangent line, we can plug in x = 2π into g(x) and subtract a times 2π:

y = g(2π) - a(2π)

= (a sin 2π + b) - a(2π)

= b - 2aπ

So the equation of the tangent line is:

y = ax + (b - 2aπ)

C. We can use the tangent line equation to approximate g(6) by plugging in x = 6 and using the equation of the tangent line at x = 2π.

First, we need to find the value of a. Since g'(2π) = a, we can use the derivative of g(x) to find a:

g'(x) = a cos x

g'(2π) = a cos (2π) = a

g'(x) = a = 2

Now, we can plug in a = 2, b = any value, and x = 2π into the tangent line equation:

y = ax + (b - 2aπ)

g(2π) = 2πa + (b - 2aπ)

a sin 6 + b ≈ 12π + (b - 4π)

Since we don't know the value of b, we can't find the exact value of g(6), but we can use the approximation:

g(6) ≈ 12π + (b - 4π)

No, the relation is not a function, because for each input there is not exactly one output.

A graph is a visual representation of data that shows the relationship between variables or sets of data. It consists of a set of points, called vertices or nodes, which are connected by lines or curves, called edges or arcs. Graphs are commonly used to display numerical information, such as trends, patterns, or relationships, and can be used to analyze and interpret data.

The relation is not a function because for the input x = -1, there are two different output values, y = 3 and y = -2. A function is a relation where each input has exactly one output, but in this case, the input -1 has two different outputs, violating the definition of a function.

To know more about graph, visit:

https://brainly.com/question/17267403

#SPJ1

Answer:

The value of the derivative at (-2/3, 2√3/3) is zero.

Step-by-step explanation:

Given function:

[tex]f(x)=-3x\sqrt{x+1}[/tex]

To differentiate the given function, use the product rule and the chain rule of differentiation.

[tex]\boxed{\begin{minipage}{5.4 cm}\underline{Product Rule of Differentiation}\\\\If $y=uv$ then:\\\\$\dfrac{\text{d}y}{\text{d}x}=u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}$\\\end{minipage}}[/tex]

[tex]\boxed{\begin{minipage}{7 cm}\underline{Differentiating $[f(x)]^n$}\\\\If $y=[f(x)]^n$, then $\dfrac{\text{d}y}{\text{d}x}=n[f(x)]^{n-1} f'(x)$\\\end{minipage}}[/tex]

[tex]\begin{aligned}\textsf{Let}\;u &= -3x& \implies \dfrac{\text{d}u}{\text{d}{x}} &= -3\\\\\textsf{Let}\;v &= \sqrt{x+1}& \implies \dfrac{\text{d}v}{\text{d}{x}} &=\dfrac{1}{2} \cdot (x+1)^{-\frac{1}{2}}\cdot 1=\dfrac{1}{2\sqrt{x+1}}\end{aligned}[/tex]

Apply the product rule:

[tex]\implies f'(x) =u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}[/tex]

[tex]\implies f'(x)=-3x \cdot \dfrac{1}{2\sqrt{x+1}}+\sqrt{x+1}\cdot -3[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-3\sqrt{x+1}[/tex]

Simplify:

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{3\sqrt{x+1} \cdot 2\sqrt{x+1}}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x+6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{9x+6}{2\sqrt{x+1}}[/tex]

An extremum is a point where a function has a maximum or minimum value.

From inspection of the given graph, the maximum point of the function is (-2/3, 2√3/3).

To determine the value of the derivative at the maximum point, substitute x = -2/3 into the differentiated function.

[tex]\begin{aligned}\implies f'\left(-\dfrac{2}{3}\right)&=- \dfrac{9\left(-\dfrac{2}{3}\right)+6}{2\sqrt{\left(-\dfrac{2}{3}\right)+1}}\\\\&=-\dfrac{0}{2\sqrt{\dfrac{1}{3}}}\\\\&=0 \end{aligned}[/tex]

Therefore, the value of the derivative at (-2/3, 2√3/3) is zero.

The approximate value of R'(5) is -716 vehicles per hour per hour.

To approximate Rʹ(5), we can use the formula for the average rate of change

Rʹ(5) ≈ (R(6) - R(4))/(6-4)

We use the values given in the table to get

R(6) = 3010 vehicles per hour

R(4) = 3442 vehicles per hour

Therefore, Rʹ(5) ≈ (3010 - 3442)/(6-4) = -716 vehicles per hour per hour.

So, the approximate rate of change of the rate at which vehicles cross the bridge at 5:00 a.m. is -716 vehicles per hour per hour. This means that the rate at which vehicles cross the bridge is decreasing at a rate of 716 vehicles per hour every hour around 5:00 a.m.

Learn more about average rate of change here

brainly.com/question/28744270

#SPJ4

The given question is incomplete, the complete question is:

On a certain weekday, the rate at which vehicles cross a bridge is modeled by the differentiable function R for 0 ≤ t ≤ 12, where R(t) is measured in vehicles per hour and t is the number of hours since 7:00 a.m. (t = 0). Values of R(t) for selected values of t are given in the table above. t(hours) 0 2 4 6 8 10 12 R(t) (vehicle per hours ) 2935 3653 3442 3010 3604 1986 2201 . Use the data in the table to approximate Rʹ(5)

The estimated volume of the coffee cup is approximately 152.8 cubic centimeters.

It is the perimeter of the circle, which can be found by multiplying the diameter of the circle by pi (π), a mathematical constant that is approximately equal to 3.14.

The volume of a right cylinder is:

V = πr²h

We are given the height of the coffee cup as h = 8.3 cm. To find the radius,

C = 2πr

We are given the circumference of the coffee cup as C = 14.9 cm. Solving for r, we have:

14.9 = 2πr

r = 14.9 / (2π) ≈ 2.372 cm

Now we can substitute these values into the formula for the volume of a cylinder:

V = πr²h

V = π(2.372)²(8.3)

V ≈ 152.8 cubic centimeters

Therefore, the estimated volume of the coffee cup is approximately 152.8 cubic centimeters.

To know more about circumference visit:

https://brainly.com/question/16324371

#SPJ1

The image of R after a reflection over the x-axis is the point S(-2, -1).

To reflect a point over the x-axis, we simply negate its y-coordinate while keeping its x-coordinate the same.

Starting with point R(-2, 1):

The x-coordinate remains the same: -2

The y-coordinate is negated: -1

So the image of R after a reflection over the x-axis is the point S(-2, -1).

To graph the reflection, we can plot the original point R and then draw a dashed line to represent the x-axis. Finally, we can plot the reflected point S on the other side of the x-axis.

To know more about mirror image of a point, click here,

https://brainly.com/question/16935892

#SPJ1

Parallelogram (Opposite sides have the same length). Parallelogram (Area is one-half the base times the height). Parallelogram (Opposite sides are parallel). Parallelogram (Angles can be right angles)

According to the parallelogram law, the sum of the squares of a parallelogram's four sides is equal to the sum of the squares of its two diagonals. It is essential for the parallelogram to have equal opposite sides in Euclidean geometry.

A parallelogram is a particular sort of polygon. It is a quadrilateral in which the opposite side pairs are parallel to one another. There are six crucial parallelogram characteristics to be aware of: Congruent sides are those when AB = DC.

To know more about Parallelogram visit:-

https://brainly.com/question/29147156

#SPJ1

The set of all n×n invertible matrices with the standard operations of matrix addition and scalar multiplication is (b) not a subspace.

A Subspace is defined as a subset of a vector space that is itself a vector space under the same operations of addition and scalar multiplication defined on the original vector space.

To be a subspace of Mₙ,ₙ, a subset of Mₙ,ₙ must satisfy three conditions:

(i) The subset must contain the zero matrix,

(ii) The subset must be closed under matrix addition, meaning that if A and B are in the subset, then (A + B) is also in the subset.

(iii) The subset must be closed under scalar multiplication, meaning that if A is in the subset and c is any scalar, then cA is also in the subset.

The set of all n×n invertible matrices does not contain the zero matrix, as the zero matrix is not invertible.

Therefore, it fails to meet the first condition and cannot be a subspace, the correct option is (b).

Learn more about Subspace here

https://brainly.com/question/13106912

#SPJ4

The given question is incomplete, the complete question is

Determine whether the subset of Mₙ,ₙ is a subspace of Mₙ,ₙ with the standard operations of matrix addition and scalar multiplication.

The set of all n×n invertible matrices is

(a) Subspace

(b) Not a subspace.

(a) The area under the standard normal curve to the left of 1.73 is 0.9582.

(b) The area under the standard normal curve to the left of -0.69 is 0.2454.

(c) The area under the standard normal curve to the right of 1.3 is 0.0968.

(d) The area under the standard normal curve to the right of -2.82 is 0.9974.

(e) The area under the standard normal curve between -2.22 and 0.52 is 0.6851.

(f) The area under the standard normal curve between -1 and 1 is 0.6826.

(g) The area under the standard normal curve between -4 and 4 is 0.9998.

(a) Using a standard normal table, the area under the standard normal curve to the left of 1.73 is 0.9582.

(b) Similarly, the area under the standard normal curve to the left of -0.69 is 0.2454.

(c) The area to the right of 1.3 is the same as the area to the left of -1.3. Using a standard normal table, this area is 0.0968.

(d) The area to the right of -2.82 is the same as the area to the left of 2.82. Using a standard normal table, this area is 0.9974.

(e) To find the area under the standard normal curve between -2.22 and 0.52, we need to find the area to the left of 0.52 and subtract the area to the left of -2.22. Using a standard normal table, we find that the area to the left of 0.52 is 0.6990 and the area to the left of -2.22 is 0.0139. Therefore, the area between -2.22 and 0.52 is 0.6990 - 0.0139 = 0.6851.

(f) To find the area under the standard normal curve between -1 and 1, we need to find the area to the left of 1 and subtract the area to the left of -1. Using a standard normal table, we find that the area to the left of 1 is 0.8413 and the area to the left of -1 is 0.1587. Therefore, the area between -1 and 1 is 0.8413 - 0.1587 = 0.6826.

(g) The area under the standard normal curve between -4 and 4 is the same as the area to the left of 4 minus the area to the left of -4. Using a standard normal table, we find that the area to the left of 4 is 0.9999 and the area to the left of -4 is 0.0001. Therefore, the area between -4 and 4 is 0.9999 - 0.0001 = 0.9998.

Learn more about standard normal curve here

brainly.com/question/30999102

#SPJ4

In response to the stated question, we may state that As a result, the 66th derivative of f(x) = 4 sin(x) is 4 sin(x) (x).

In mathematics, the derivative of a function with real variables measures how sensitively the function's value varies in reaction to changes in its parameters. Derivatives are the fundamental tools of calculus. Differentiation (the rate of change of a function with respect to a variable in mathematics) (in mathematics, the rate of change of a function with respect to a variable). The use of derivatives is essential in the solution of calculus and differential equation problems. The definition of "derivative" or "taking a derivative" in calculus is finding the "slope" of a certain function. Because it is frequently the slope of a straight line, it should be enclosed in quotation marks. Derivatives are rate of change metrics that apply to almost any function.

Using the chain rule and the derivative of the sine function repeatedly yields the 66th derivative of the function [tex]f(x) = 4 sin (x).[/tex]

The derivative of sin(x) is cos(x), and the derivative of cos(x) is -sin(x), and this pattern repeats itself every two derivatives.

As a result, the first derivative of f(x) is:

[tex]f'(x) = 4 cos (x)[/tex]

The second derivative is as follows:

[tex]f"(x) = -4 sin (x)[/tex]

The third derivative is as follows:

[tex]f"'(x) = -4 cos (x)[/tex]

The fourth derivative is as follows:

[tex]f""(x) = 4 sin (x)[/tex]

And so forth.

[tex]f^{(66)(x)} = 4 sin (x)[/tex]

Because the pattern repeats every four derivatives, the 66th derivative is the same as the second, sixth, tenth, fourteenth, and so on.

As a result, the 66th derivative of f(x) = 4 sin(x) is 4 sin(x) (x).

To know more about derivatives visit:

https://brainly.com/question/25324584

#SPJ1

Answer: 32

Step-by-step explanation: got you broski

The probability of getting a head on the coin is 1/2, and the probability of getting a 4 on the die is 1/6.

Since the coin toss and the die roll are independent events, we can multiply the probabilities to get the probability of both events happening at the same time:

P(head and 4) = P(head) × P(4)

P(head and 4) = (1/2) × (1/6)

P(head and 4) = 1/12

P(head and 4) ≈ 0.0833 (rounded to four decimal places)

Therefore, the probability of getting a head on the coin and the number 4 on the die is approximately 0.0833.

To learn more about probability, refer:-

https://brainly.com/question/30034780

#SPJ1

When [tex]x[/tex] approaches infinity, the function's graph moves closer to the x-axis and horizontal equilibrium point at [tex]y = 3[/tex]. For [tex]x -2[/tex], which is denoted by such an open ring at [tex](-2, 3)[/tex] on the graph, the function is undefined.

A graphs is a pictorial display or diagram that displays facts or numbers in an organized way in math. The relationships between multiple things are frequently represented by the points on a graph.

The graph is a mathematics structure made up of a collection of points Coordinates and a set of lines connecting some pairs of VERTICES that may or may not be empty. There is a chance that the edges will be directed, or orientated.

To know more about graph visit:

https://brainly.com/question/17267403

#SPJ1

The points with high leverage have the potential to exert a strong influence on the estimated regression coefficients and can lead to large changes. However, the relationship between leverage and residual variance is not straightforward, and it is possible for a point with high leverage to have a small residual variance or vice versa.

In statistics, The point with the highest leverage in a dataset is the observation that has the largest deviation from the mean of the predictor variable. Residual variance is a measure of the difference between the actual values of the response variable and the values predicted by the regression model.

In the case where the point with the highest leverage has the smallest residual variance, it suggests that this observation is well-explained by the regression model and that it does not have a large effect on the overall fit of the model.

This may occur if the point is located near the center of the distribution of the response variable or if it has predictor variable values that are consistent with the overall trend of the data.

To know more about residual variance:

https://brainly.com/question/30281901

#SPJ4

Answer: 1 hour and 36 minutes

Step-by-step explanation:

We can use the concept of the work formula, which states that the amount of work done is equal to the rate of work multiplied by time.

Let's start by finding the rate of work of each worker. We know that eight workers can load 4320 bricks in 1 hour, so the rate of work of each worker is:

rate of work = amount of work / time = 4320 bricks / (8 workers x 1 hour) = 540 bricks/hour

Now we want to know how long it would take for five workers to load the same amount of bricks. We can use the work formula again, but this time we know the rate of work and the amount of work, and we want to find the time:

amount of work = rate of work x time

Substituting the values we know:

4320 bricks = (540 bricks/hour) x time x 5 workers

Simplifying, we get:

time = 4320 bricks / (540 bricks/hour x 5 workers) = 1.6 hours or 1 hour and 36 minutes

Therefore, it would take 1 hour and 36 minutes for 5 workers to load 4320 bricks on the truck.

f(x) = -4(x + 7) is the equation for a parabola with x-intercepts at (1/4,0) and (-7,0) and a point of intersection of (0,7). (x - 0.25).

An equation is a mathematical statement containing two algebraic expressions flanked by equal signs (=) on either side.

It shows that the relationship between the left and right printed expressions is equal.

All formulas hav LHS = RHS (left side = right side).

You can solve equations to determine the values ​​of unknown variables that represent unknown quantities.

If a statement does not have an equals sign, it is not an equation. A mathematical statement called an equation contains the symbol "equal to" between two expressions of equal value.

y = f(x) = A(x - a)(x - b)

We have -

a = 1/4

b = -7

learn more about equations click here:

brainly.com/question/2972832

#SPJ1.

As a result, the probability of a 45-54-year-old motorist becoming involved in an accident is 5.38%, rounded to two decimal places.

Probabilistic theory is a branch of mathematics that calculates the likelihood of an event or proposition occurring or being true. A risk is a number between 0 and 1, with 1 indicating certainty and a probability of around 0 indicating how probable an event appears to be to occur. Probability is a mathematical term for the likelihood or likelihood that a certain event will occur. Probabilities can also be expressed as numbers ranging from 0 to 1 or as percentages ranging from 0% to 100%. In relation to all other outcomes, the ratio of occurrences among equally likely alternatives that result in a certain event.

To determine the likelihood that a driver aged 45-54 was involved in an accident, divide the number of drivers in that age group who were engaged in an accident by the total number of drivers in that age group:

Probability = Number of 45-54-year-old drivers involved in an accident / Total number of 45-54-year-old drivers

We can observe that 7 drivers aged 45 to 54 were engaged in an accident, with a total of 130 drivers in that age group:

The probability is 7/130 = 0.0538.

To convert this to a percentage, multiply by 100:

Probability = 0.0538 * 100 = 5.38 percent

As a result, the likelihood of a 45-54-year-old motorist becoming involved in an accident is 5.38%, rounded to two decimal places.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Answer:

m = 0

Step-by-step explanation:

Slope = rise/run or (y2 - y1) / (x2 - x1)

Pick 2 points (0,2) (1,2)

We see the y stay the same and the x increase by 1, so the slope is

m = 0/1 = 0

So, the slope is 0

A. the rate of change in the number of visitors between 10 A.M. and 12 P.M. is 200, which means that the number of visitors increased by 200 within those two hours.

Visitors are people who come to a place for a short period of time. They may come for leisure, business, education, or to visit family or friends. Visiting a place can bring economic, educational, cultural, and social benefits to the host community. It can create jobs, bring in new ideas, and offer opportunities to learn about other cultures. Visitors can also bring new perspectives and experiences, which can lead to more understanding between cultures and help to strengthen relationships.

b. The rate of change in the number of visitors between 1 P.M. and 2 P.M. is 100, which means that the number of visitors increased by 100 within this hour. This indicates that the number of visitors at the zoo is still increasing but at a slower rate.

To learn more about visitors

https://brainly.com/question/30984579

#SPJ1

The nearest whole number, which is 9. So the middle apartment number for house 17 is 9.

An apartment is a self-contained housing unit that occupies only part of a building. Apartments typically consist of one or more bedrooms, a kitchen, a living room, and a bathroom, and usually include amenities such as heating, air conditioning, and appliances. Apartments are usually rented, though some are owned. Living in an apartment can be a great way to save money, as apartments are often more affordable than larger homes.

The rule is to take the house number and divide it by two and round up to the nearest whole number. This will give the middle apartment number. For example, if the house number is 17, divide it by two which equals 8.5, and then round up to the nearest whole number, which is 9. So the middle apartment number for house 17 is 9.

To learn more about apartment
https://brainly.com/question/28880470
#SPJ1

(a) The interval (-∞, ∞).

(b) The interval (-∞, ∞).

(c) The interval (-∞, ∞).

(d) The interval (-π/2, π/2) \ {0}.

(a) The longest interval in which the given initial value problem is certain to have a unique twice-differentiable solution is the interval where the coefficient function, 3t, is continuous and bounded. Since 3t is a continuous and bounded function for all t in the interval (-∞, ∞), the given initial value problem is certain to have a unique twice-differentiable solution for all t in (-∞, ∞).

(b) The longest interval in which the given initial value problem is certain to have a unique twice-differentiable solution is the interval where the coefficient functions, t(t - 4), 3t, and 4, are continuous and bounded. Since t(t - 4), 3t, and 4 are continuous and bounded functions for all t in the interval (-∞, ∞), the given initial value problem is certain to have a unique twice-differentiable solution for all t in (-∞, ∞).

(c) The longest interval in which the given initial value problem is certain to have a unique twice-differentiable solution is the interval where the coefficient functions, cost and In|t|, are continuous and bounded. Since cost and In|t| are continuous and bounded functions for all t in the interval (-∞, ∞), the given initial value problem is certain to have a unique twice-differentiable solution for all t in (-∞, ∞).

(d) The longest interval in which the given initial value problem is certain to have a unique twice-differentiable solution is the interval where the coefficient functions, x - 2, 1, and (x - 2)tanx, are continuous and bounded. Since x - 2, 1, and (x - 2)tanx are continuous and bounded functions for all x in the interval (-π/2, π/2) \ {0} , the given initial value problem is certain to have a unique twice-differentiable solution for all x in (-π/2, π/2) \ {0}.

Learn more about twice-differentiable solution here

brainly.com/question/30320300

#SPJ4

The given question is incomplete, the complete question is:

determine the longest interval in which the given initial value problem is certain to have a unique twice- differentiable solution. Do not attempt to find the solution. (a) ty" + 3y = 1, y(1) = 1, y'(1) = 2   (b)   t(t – 4)y" + 3ty' + 4y = 2, y(3) = 0, y'(3) = -1 (c)   y" + (cost)y' + 3( In |t|) y = 0, y(2) = 3, y'(2) = 1 (d) (x - 2)y"+y' +(x - 2)(tan x) y = 0, y(3) = 1, y'(3) = 2

Answer:

a

Step-by-step explanation: