Greg sold small boxes of candy for $3 and
large boxes for $5. He sold a total of 21
boxes for $87. How many large boxes did he sell?

The weight of the package is 56 using arithmetic operations.

Mathematicians use multiplication to calculate the product of two or more integers. It is a fundamental operation in mathematics that is frequently used in everyday living. When we need to combine sets of similar sizes, we use multiplication. The fundamental concept of repeatedly adding the same number is represented by the process of multiplication. The results of multiplying two or more numbers are known as the product of those numbers, and the factors that are compounded are referred to as the factors. Repeated adding of the same number is made easier by multiplying the numbers.

let weight of package be= x

x*5/7=40

x=(40*7)/5

x=56

To know more about multiplication, visit

https://brainly.com/question/5992872

#SPJ1

The relation O is not reflexive, symmetric, and not transitive is one of the following statements that is true about the relation O.  which is option (C).


Given, [tex]\forall m, n \in Z, m O n \longleftrightarrow \exists k \in Z \mid(m-n)=2 k+1[/tex]
Let's verify for the following relations :
Reflexive relation:
[tex]\forall a\in Z, a O a \longrightarrow \exists k\in Z \mid (a-a)= 2k+1[/tex]
[tex]0\neq 2k+1[/tex] for all k [tex]\in[/tex] Z
Since 2k+1 can never be zero for any k [tex]\in[/tex] Z, hence we conclude that the relation O is not reflexive.
Symmetric relation:
Suppose a, b [tex]\in[/tex] Zsuch that a O b i.e. (a-b)=2k+1, where k[tex]\in[/tex] Z.
Now, we need to check whether b O a is true or not i.e. (b-a)=2j+1 for some j[tex]\in[/tex] Z
We have,
[tex](a-b) = 2k+1 \longrightarrow (b-a) = -2k-1 = 2(-k) - 1[/tex]
Let j=-k-1, then we have j[tex]\in[/tex] Z and 2j+1 = -2k-1
Hence, (b-a) = 2j+1, and we conclude that the relation O is symmetric.
Transitive relation:
Suppose a, b, c[tex]\in[/tex] Z such that a O b and b O c.
Now, we need to check whether a O c is true or not.
We have,
(a-b)=2k_1+1 and (b-c)=2k_2+1 for some k_1,k_2[tex]\in[/tex] Z
(a-b)+(b-c) = 2k_1+1 + 2k_2+1
a-c = 2k_1+2k_2+2
Let j=k_1+k_2+1, then we have j[tex]\in[/tex] Z and a-c=2j
Hence, (a-c) is even and we conclude that the relation O is not transitive.
Therefore, the relation O is not reflexive, symmetric, and not transitive. Hence, option (C) is the correct answer.

To know more about relation: https://brainly.com/question/28827119

#SPJ11

The researcher can use the one-sample t-test to test the null hypothesis that the mean body temperature of residents in a nursing home is 98.6 F.

The one-sample t-test is a statistical test used to compare the mean of a sample to a known value or a hypothesized value. It is also known as the single-sample t-test.

The null hypothesis is that the mean body temperature of residents in a nursing home is 98.6 F, while the alternative hypothesis is that the mean body temperature of residents in a nursing home is not 98.6 F.

Learn more about null hypothesis at

https://brainly.com/question/30821298

#SPJ11

Alan can sew 60 feet of fabric in 1.5 minutes.

In mathematics, slope is a measure of the steepness of a line. It is defined as the ratio of the change in the vertical (y) coordinate to the change in the horizontal (x) coordinate between two points on the line. In other words, slope represents the rate at which the line is rising or falling. The slope of a line can be positive, negative, zero or undefined, depending on the direction and steepness of the line. The slope formula is given by:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are two points on the line. The slope is often denoted by the letter m.

We can see that the relationship between time and length of fabric is a linear one. Using the two given points (1, 40) and (2, 80), we can find the slope of the line:

slope = (change in y) / (change in x) = (80 - 40) / (2 - 1) = 40

This means that for every 1 minute, Alan can sew 40 feet of fabric. To find how much fabric he can sew in 1.5 minutes, we can use the equation for a line:

y = mx + b

where y is the length of fabric, x is the time in minutes, m is the slope we just found, and b is the y-intercept (which we can find by plugging in one of the points).

Using the point (1, 40), we get:

40 = 40(1) + b

b = 0

So the equation for the line is:

y = 40x

To find the length of fabric Alan can sew in 1.5 minutes, we plug in x = 1.5:

y = 40(1.5) = 60

Therefore, Alan can sew 60 feet of fabric in 1.5 minutes.

To know more about equation visit:

https://brainly.com/question/29134661

#SPJ1

The complete question is:

Using the definitions of trigonometric functions for x = 0, we have tan(0) = 0 and cos(0) = 1, which simplifies to 0 * 1 = 0, and sin(0) = 0,

therefore tan(0) cos(0) = sin(0).

Define trigonometric.

Trigonometric refers to the branch of mathematics that deals with the relationships between the sides and angles of triangles, particularly right triangles. It involves the study of trigonometric functions such as sine, cosine, tangent, cotangent, secant, and cosecant, and their properties and applications in various fields including mathematics, science, engineering, and navigation.

For any angle x, we have the identity:

tan(x) = sin(x) / cos(x)

Setting x = 0, we get:

tan(0) = sin(0) / cos(0)

Since tan(0) = 0 and cos(0) = 1, we can simplify this equation to:

0 = sin(0)

which is true, since the sine of 0 degrees is 0. Therefore, we have shown that:

tan(0) cos(0) = sin(0)

Therefore, the identity tan(0) cos(0) = sin(0) is proven.

To learn more about trigonometric click here

https://brainly.com/question/25618616

#SPJ1

It should be noted that this approach follows the need to maintain the list's original order of elements.

A function is a relationship between a set of possible outcomes (referred to as the range) and a set of inputs (referred to as the domain), with the property that each input is associated to exactly one output. A function, then, is a mathematical rule that designates a specific output value for each input value. Equations, graphs, and tables are frequently used to represent functions. They are employed to mimic real-world occurrences and to address issues in numerous branches of mathematics, science, engineering, and other disciplines.

given

The value to be deleted from the list is represented by an integer value that the method accepts as an argument.

The method iterates through the list's components using a while loop.

The method determines if the current element equals the requested value while it is in the loop. If so, the procedure uses the ArrayList class's remove method to remove the element from the list. If not, the method increases the index variable and moves on to the next element.

The procedure keeps going over the list until all instances of the given value have been eliminated.

It should be noted that this approach follows the need to maintain the list's original order of elements.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

(a) μx=15 and σx=2And, P(15≤x≤17) can be obtained by converting the corresponding x values into z scores.z1=15−15/2=0z2=17−15/2=1P(15≤x≤17) = P(0≤Z≤1) = 0.3413

(b) μx=15 and σx=1.75 And, P(15≤x≤17) can be obtained by converting the corresponding x values into z scores. z1=15−15/1.75=0z 2=17−15/1.75=1.143 P(15≤x≤17) = P(0≤Z≤1.143) = 0.382.

Calculation of µx and σxIf a random sample of size n=49 is drawn from a distribution where µ=15 and σ =14. Then the sample mean is given by the formula;μx=μ=15And, the standard error of the mean (standard deviation of the distribution of the sample means) is given by the formula;σx=σn=1449=2 Thus,μx=15 and σx=2And, P(15≤x≤17) can be obtained by converting the corresponding x values into z scores.z1=15−15/2=0z2=17−15/2=1P(15≤x≤17) = P(0≤Z≤1) = 0.3413

Calculation of µx and σxIf a random sample of size n=64 is drawn from a distribution where µ=15 and σ =14. Then the sample mean is given by the formula;μx=μ=15 And, the standard error of the mean (standard deviation of the distribution of the sample means) is given by the formula;σx=σn=1464=1.75 Thus,μx=15 and σx=1.75 And, P(15≤x≤17) can be obtained by converting the corresponding x values into z scores. z1=15−15/1.75=0z 2=17−15/1.75=1.143 P(15≤x≤17) = P(0≤Z≤1.143) = 0.382

Part (b) is expected to have a higher probability of P(15≤x≤17) than that of Part (a) because the standard deviation is inversely proportional to the sample size n.

Hence, the larger the sample size, the smaller the standard deviation. And, the smaller the standard deviation, the greater the accuracy of the sample mean in estimating the population mean.

Learn more about Random sample

brainly.com/question/29852583

#SPJ11

The value of μV is 40 cm³.

Given,The area of bottom of cylindrical container = 10 cm²The height of container = h = Mean height = 4 cm Standard deviation of height = σ = 0.2 cm We are supposed to find the mean volume of fluid in the container.In order to calculate the mean volume, first we need to calculate the volume of fluid in the container.Volume of a cylindrical container = πr²h Where, r is the radius of the base of the container.So, we need to calculate the value of r.The area of the bottom of the container is given as 10 cm².

We know that the area of the base of a cylinder is given as:Area of base of cylinder = πr² We are given that area of the base is 10 cm². So,10 = πr²r² = 10/πr = √(10/π) We can find the volume of fluid using the values we have.Volume of fluid = πr²h = π(√(10/π))² x 4 = 40 cm³We know that mean volume, μV is given as:μV = πr²μh So, we need to calculate the value of μh. We know that standard deviation σh is given as:σh = 0.2 cm So,μh = h = 4 cm So,μV = πr²μh = π(√(10/π))² x 4 = 40 cm³

Learn more about Area

brainly.com/question/27683633

#SPJ11

To find the total cost of purchasing the video game at the local Big Box store with a [tex]10[/tex] % discount and  [tex]6.5[/tex] % sales tax, we can use the following formula:

Total cost = (Sale amount—Discount) x (1 + Tax rate)

Plugging in the values we have:

Total cost [tex]= (49.95–4.995) \times 1.065[/tex]

Total cost  [tex]= 44.955 \times 1.065[/tex]

Total cost [tex]= 47.83[/tex]

Therefore, the total cost of purchasing the video game at the local Big Box store would be $ [tex]47.83[/tex].

At the online store, the game costs $  [tex]44.95[/tex] plus a shipping charge of $ [tex]4.00[/tex] , which comes to a total of $ [tex]48.95.[/tex]

So, purchasing the game at the online store would be slightly cheaper.

To calculate the total cost and interest earned for each principal amount and time period, we can use the following formula:

Total cost = Principal + Interest earned

Interest earned = Principal x Annual rate x Time period (in years)

Plugging in the values we have:

For the first row:

Interest earned [tex]= 2400 \times 0.049 \times0.5[/tex]

Interest earned = $58.80

Total cost [tex]= 2400 + 58.80[/tex]

Total cost = $ [tex]2,458.80[/tex]

For the second row:

Interest earned [tex]= 9460.12 \times 0.022 \times 2[/tex]

Interest earned = $ [tex]415.24[/tex]

Total cost  [tex]= 9460.12 + 415.24[/tex]

Total cost = $ [tex]9,875.36[/tex]

For the third row:

Interest earned = [tex]3923.87 \times 0.02 \times5[/tex]

Interest earned = $ [tex]392.39[/tex]

Total cost  [tex]= 3923.87 + 392.39[/tex]

Total cost = $ [tex]4,316.26[/tex]

Let's assume Jorge's commission for the month was C. We can set up the following equation:

[tex]C = 0.09 \times 89400[/tex]

We know that Harris sold the same amount, but made $447 more in commission. So we can set up another equation:

[tex]C + 447 = \times89400[/tex]

Where x is the commission rate for Harris.

We can substitute the value of C from the first equation into the second equation:

[tex]0.09 \times 89400 + 447 = \times 89400[/tex]

Simplifying:

[tex]8046 + 447 = 89400x[/tex]

[tex]8493 = 89400x[/tex]

[tex]x = 0.095[/tex] or  [tex]9.5[/tex] %

Therefore, Harris' commission rate is [tex]9.5%[/tex]%  .

Learn more about cost here:

https://brainly.com/question/28446697

#SPJ1

The triangle DEF is twice the size of the triangle ABC, and the triangles are similar triangles as the sides of the triangles are in correspondence.

Triangles that resemble one another but may not be precisely the same size are said to be comparable triangles. When two objects have the same shape but different sizes, they can be said to be comparable. This shows that when shapes are amplified or demagnified, they superimpose one another. This feature of similar shapes is referred to as "similarity".

According to the figure, AB = 1 DE = 2

Therefore, the triangle DEF is twice as big as the triangle ABC.

Absolutely, there are similarities between the triangles ABC and DEF.

This is due to the fact that triangle ABC's corresponding side is twice as long as DEF's corresponding side and the angle provided are same.

Therefore, Multiplying the coordinates of A by 2 provides coordinates of D.

To know more about similar triangles, visit:

https://brainly.com/question/14926756

#SPJ1

120 middle schοοl students prefer the dοcumentaries televisiοn genre.

A percentage in mathematics is a number οr ratiο that can be expressed as a fractiοn οf 100. If we need tο calculate a percentage οf a number, we shοuld divide it by 100 and multiply the result. Therefοre, the percentage refers tο a part per hundred. Per 100 is what the wοrd percentage means. The symbοl "%" is used tο represent it.

The tοtal is 100%.  Subtract the οther parts οf the circle tο find the percent fοr spοrts.

100 - 14 -22-20 -20

24

Spοrts is 24%

Multiply the number οf students by the percentage οf students that prefer spοrts

500 *24%

500 *.24

120

Learn more about percentage

https://brainly.com/question/29306119

#SPJ1

Answer:

Step-by-step explanation:

[tex](x-20)^2=x^2-20[/tex]

Expanding LHS gives:

  [tex]x^2-40x+400=x^2-20[/tex]

         [tex]-40x+400=-20[/tex]          (subtracted [tex]x^2[/tex] from both sides)

                   [tex]-40x=-420[/tex]        (subtracted 400 from both sides)

                         [tex]x=\frac{-420}{-40}[/tex]          (divided both sides by-40)

                         [tex]x=\frac{21}{2} =10\frac{1}{2}[/tex]

A negative exponent indicates that the base should be inverted or flipped, and the exponent should become positive. Therefore, -45 in positive exponent form would be: 1/ (45²1) or 1/45

What is a negative component?

A negative exponent is a mathematical notation indicating that the number or variable should be inverted or flipped, and the exponent should be made positive. In other words, a negative exponent represents the reciprocal of the number or variable raised to the corresponding positive exponent.

For example, 2²-3 is read as "2 to the power of negative 3" and represents 1/(2²3), which is equal to 1/8. Similarly, x²-2 is read as "x to the power of negative 2" and represents 1/(x²2), which is the reciprocal of x squared.

Negative exponents are used in various mathematical and scientific applications, such as in calculations involving very small or large numbers, in scientific notation, and in the rules of exponents.

To know more about Negative Component visit:

https://brainly.com/question/29009712

#SPJ1

Complete question:

Write -45 in positive exponent form.

Answer:

To find the population in the year 2001, we need to work backwards from the given population of 54,000 in 2003.

Let P be the population in the year 2001. From 2001 to 2003, there are two years, during which the population grows at a rate of 5% per annum. We can calculate the population in 2003 using the formula:

P * (1 + r)^n = 54,000

where r is the annual growth rate (5% or 0.05) and n is the number of years (2). Plugging in the values, we get:

P * (1 + 0.05)^2 = 54,000

Simplifying the equation, we get:

P = 54,000 / (1.05)^2

P = 48,543 (rounded to the nearest whole number)

Therefore, the population in the year 2001 was approximately 48,543.

To find the population in the year 2005, we can use the same formula with n = 2 + 2 = 4 (since we want to find the population four years after 2001):

P * (1 + 0.05)^4 = ?

Plugging in the value of P we just found, we get:

48,543 * (1 + 0.05)^4 = 60,723 (rounded to the nearest whole number)

Therefore, the population in the year 2005 would be approximately 60,723

(please could you kindly mark my answer as brainliest )

Answer:

(a) Since there are 428 equally likely pages, the probability of randomly turning to page 45 is 1/428, which is approximately 0.00234 or 0.234%.

(b) There are two possible cases for an even numbered page: either the last digit is 0, 2, 4, 6, or 8, or the page number ends in 00.

For the first case, there are 5 possible digits for the units place, and each of these digits can be followed by any one of the 5 possible digits for the tens place. So there are 5x5 = 25 even numbered pages that end in a non-zero digit.

For the second case, there are 4 possible digits for the hundreds place, and each of these digits can be followed by 00. So there are 4 even numbered pages that end in 00.

Therefore, there are 25 + 4 = 29 even numbered pages in total. Since there are 428 pages in the book, the probability of randomly turning to an even numbered page is 29/428, which is approximately 0.06776 or 6.776%.

Step-by-step explanation:

(a) Оскільки існує 428 рівноймовірних сторінок, ймовірність випадкового переходу на сторінку 45 дорівнює 1/428, що становить приблизно 0,00234 або 0,234%.

(b) Існує два можливих випадки, коли сторінка має парний номер: або остання цифра 0, 2, 4, 6 або 8, або номер сторінки закінчується на 00.

У першому випадку є 5 можливих цифр для позначення одиниць, і за кожною з цих цифр може слідувати будь-яка з 5 можливих цифр для позначення десятків. Таким чином, існує 5x5 = 25 парних сторінок, які закінчуються на ненульову цифру.

У другому випадку є 4 можливі цифри для сотень, і за кожною з цих цифр може стояти 00. Отже, є 4 парні сторінки, які закінчуються на 00.

Таким чином, всього є 25 + 4 = 29 парних сторінок. Оскільки в книзі 428 сторінок, ймовірність випадкового переходу на парну сторінку дорівнює 29/428, що становить приблизно 0.06776 або 6.776%.

Answer: The father is 44 and the son is 22 I think.

Step-by-step explanation:

Son is x then father's age is 2x so 20 years ago,12(x-20)=2x-20 so 10x=240–20=220 or x=22, and father's age is 44 years.

Using the mean formula we know that the new mean height of 14 people is 159.7 cm.

A mean in math is the average of a data set, calculated by adding all numbers together and then dividing the total of the numbers by the number of numbers.

For illustration, with the dataset containing: 8, 9, 5, 6, 7, the mean is 7, as 8 + 9 + 5 + 6 + 7 = 35, 35/5 = 7.

The mean height given is 159 cm.

Let, x1, x2, x3 ..... x15 be the height of 15 people.

x1+x2+x3 ..... x15/15 = 159

x1+x2+x3 ..... x15 = 159 * 15 = 2385 cm ...(1)

Let, x1 = 148 cm, who leaves the group.

148+x2+x3 ..... x15 = 2385 cm

x2+x3 ..... x15 = 2237 cm

Now, we have 14 people.

New mean = x2+x3 ..... x15/14

= 2237/14

= 159.7 cm

Therefore, using the mean formula we know that the new mean height of 14 people is 159.7 cm.

Know more about mean here:

https://brainly.com/question/1136789

#SPJ1

The probability of selecting a vowel at random from the word "COVID NINETEEN" is 0.357, and the probability of selecting a consonant at random is 0.643.

The word "COVID NINETEEN" has a total of 14 letters. We can count the number of vowels and consonants in the word to determine the probability of selecting a vowel or a consonant at random.

There are five vowels in the word: O, I, E, E, and E.

Therefore, the probability of selecting a vowel at random is:

P(vowel) = number of vowels / total number of letters

= 5 / 14

= 0.357 or approximately 35.7%    

There are nine consonants in the word: C, V, D, N, T, N, T, N, and N.

Therefore, the probability of selecting a consonant at random is:

P(consonant) = number of consonants / total number of letters

= 9 / 14

= 0.643 or approximately 64.3%

Therefore, the probability of selecting a vowel at random from the word "COVID NINETEEN" is 0.357, and the probability of selecting a consonant at random is 0.643.

To learn more about probability:

https://brainly.com/question/30034780

#SPJ9

The derivative of the given function [tex]y = 5x^2 sec^{(-1)(2x-3)^2}[/tex] is [tex]dy/dx=-20x\sqrt{((2x-3)^2-1)}[/tex]

It can be derived as:

We can use the chain rule and the derivative of [tex]sec^{(-1)x}[/tex] which is [tex]-1/(x*\sqrt{(x^2-1)})[/tex]

First, we apply the chain rule to the function.

Let  [tex]u = (2x-3)^2[/tex], then:

[tex]y = 5x^2 sec^{(-1)u}[/tex]

[tex]dy/dx = d/dx [5x^2 sec^{(-1)u}][/tex]

[tex]dy/dx = d/dx [5x^2 sec^{(-1)[(2x-3)^2]}][/tex]

[tex]dy/dx= 5x^2 d/dx[sec^{(-1)u}][/tex]     (Using the chain rule)

Now, let [tex]v = u^{(1/2)} = (2x-3)[/tex].

Then:

[tex]dy/dx = 5x^2 d/dv [sec^{(-1)v}] dv/dx[/tex]          (Using the chain rule again)

We have:

[tex]d/dv [sec^{(-1)v}] = -1/(v*\sqrt{(v^2-1)}) = -1/[(2x-3)*\sqrt{((2x-3)^2-1)}][/tex]

Also, [tex]dv/dx = 2[/tex]

Substituting these back into the equation:

[tex]dy/dx = 5x^2 d/dv [sec^{(-1)v}] dv/dx[/tex]

[tex]dy/dx= 5x^2 (-1/[(2x-3)*\sqrt{((2x-3)^2-1)}] (2)[/tex]

Simplifying this expression gives:

[tex]dy/dx = -20x (2x-3)/[(2x-3)*\sqrt{((2x-3)^2-1)}][/tex]

[tex]dy/dx = -20x\sqrt{((2x-3)^2-1)}[/tex]

Therefore, the derivative of y with respect to x is:

[tex]dy/dx = -20x\sqrt{((2x-3)^2-1)}[/tex]

To practice more questions about derivative:

https://brainly.com/question/12047216

#SPJ11

In the vector space model, the terms in the documents represent the dimensions in the multi-dimensional space.

A vector space model is a mathematical model that is utilized in information retrieval to represent a document as a multidimensional array of numbers (terms or concepts), in which each dimension corresponds to a specific term, and each value in the array represents the weight or importance of the corresponding term in the document. This representation is used to evaluate the relevance of documents to a given search query.

The dimensions in the multi-dimensional space of a vector space model correspond to the terms that the documents contain. In other words, each dimension represents a term, and each document is represented as a vector of weights or scores associated with each term.

The more frequently a term appears in a document, the higher the weight assigned to it. The goal of the vector space model is to represent documents in a way that facilitates comparison and ranking based on the similarity between the document and the query.

To know more about the "vector space model ": https://brainly.com/question/29409719

#SPJ11

Instead of putting aed and dec equal to one another angle, he should have set the total of aed and dec to 180°.

Vernon made the error of presuming that the two angles aed and dec are equal to one another, but in reality, they are on different sides of a straight line, adding up to 180°. Vernon calculated the wrong number for x by assuming the angles to be equal to one another. This error is frequent because it is simple to forget that these two angles complement one another. Before attempting to solve for any unknown values, it is crucial to thoroughly examine the provided information and the connections between the angles. One can find the right answer for x by understanding the connection between the two angles in this issue.

learn more about angles here:

https://brainly.com/question/28451077

#SPJ4

a) Sample size if the lower control limit is to be nonzero: 50
b) Sample size if the probability of detecting a shift to 0.04 is to be 0.50: 100

a) How large should the sample size be if the lower control limit is to be nonzero?

n = (2σ / d)²We know that:

Center line (CL) = 0.01

Sigma (σ) = LCL = 0.005

d = Centerline - LCL = 0.01 - 0.005 = 0.005

Substituting the values in the formula, we get

n = (2 * 0.005 / 0.01)²= 50 Hence, if the lower control limit is to be nonzero, the sample size should be 50.

b) How large should the sample size be if we wish the probability of detecting a shift to 0.04 to be 0.50?

The probability of detecting a shift to 0.04 is denoted by β and is calculated using the following formula:

β = Φ [(-Zα/2 + Zβ) / √ (p₀q₀/n)], Where, Φ is the standard normal distribution function, Zα/2 is the critical value for the normal distribution at the (α/2)th percentile, Zβ is the critical value for the normal distribution at the βth percentile, p₀ is the assumed proportion of nonconforming items, q₀ is 1 – p₀, and n is the sample size.

In order to determine the sample size, we must first select a value for β. If we select a value for β of 0.50, then β = 0.50. This implies that we have a 50% chance of detecting a shift if one occurs. Since the exact value for p₀ is unknown, we assume that p₀ = 0.01, which is equal to the center line.

n = (Zα/2 + Zβ)² p₀q₀ / β², Substituting the values in the formula, we get,

n = (Zα/2 + Zβ)² p₀q₀ / β²= (1.96 + 0.674)² (0.01) (0.99) / 0.50²= 99.7 ≈ 100

Hence, if we wish the probability of detecting a shift to 0.04 to be 0.50, the sample size should be 100.

To learn more about control limit and probability refer :

https://brainly.com/question/29214285

#SPJ11

Answer:

$350

Step-by-step explanation:

with the interest rate you'll be spending more money

The types of inferences that will be made about population parameters are causation, estimation, and regression on the basis of relationship.

Causation is the process of showing the cause-and-effect relationship between two variables. In this case, one variable influences the other variable. This type of inference is significant when making decisions because it helps us understand how a change in one variable leads to a change in another variable.

Estimation: In statistical analysis, estimation refers to determining the possible value of an unknown population parameter. It is impossible to calculate the population parameters directly, and hence we use sample statistics to estimate them.

Regression analysis is the statistical technique used to identify the relationship between two variables. It involves estimating the coefficients of the model that best fit the data.

This type of inference helps us predict the value of a dependent variable based on an independent variable.

Learn more about Inferences here:

https://brainly.com/question/29774121

#SPJ11

The dilated figure has the following coordinates: A' (-15, 0), B' (-5, 10), C' (10, 10), D' (15, -5), and E' (5, -10).

In this sense, coordinates are the points where a grid system intersects. Latitude and longitude are the traditional ways to express GPS coordinates. Degrees of separation north and south from the equator, which is 0 degrees, are measured by lines of latitude coordinates.

Just multiply the coordinates of each point by 5 to construct a figure about the origin using a scale factor of 5.

A (-3, 0)

B (-1, 2)

C (2, 2)

D (3, -1)

E (1, -2)

The coordinates of each point are multiplied by 5 to enlarge the image by a scale factor of 5:

A' = (-3 * 5, 0 * 5) = (-15, 0)

B' = (-1 * 5, 2 * 5) = (-5, 10)

C' = (2 * 5, 2 * 5) = (10, 10)

D' = (3 * 5, -1 * 5) = (15, -5)

E' = (1 * 5, -2 * 5) = (5, -10)

The coordinates of the dilated figure are:

A' (-15, 0)

B' (-5, 10)

C' (10, 10)

D' (15, -5)

E' (5, -10)

To know more about coordinates visit:-

https://brainly.com/question/16634867

#SPJ1

Point KLMN in the quadrilateral has coordinates that are [tex]N' (-3, 2)[/tex].

The enclosed figure of a quadrilateral has four sides. Raphael created the quadrilaterals in these geometric forms. a shape in quadrilaterals. The shape contains no right angles and just single set of parallel sides.

A closed form noted for having sides with various widths and lengths is a quadrilateral. It is a closed, two-dimensional polygon with four sides, four angles, and four vertices. The trapezium, parallelogram, rectangular, square, rhombus, and kite are just a few examples of quadrilaterals.

When a point is reflected across the [tex]y-axis[/tex], its [tex]x[/tex]-coordinate becomes its opposite while its [tex]y[/tex]-coordinate remains the same.

So to find the coordinates of [tex]N[/tex]', we need to reflect the point [tex]N(3, 2)[/tex]across the y-axis, which means we change the sign of its x-coordinate:

[tex]N' = (-3, 2)[/tex]

Therefore, the coordinates of point [tex]N'[/tex] are [tex](-3, 2)[/tex].

To know more about Quadrilateral visit:

https://brainly.com/question/29934440

#SPJ1

The Length of AB in square ABCD is 30 feet.

Since the squares ABCD and EFGH are similar, their corresponding sides are proportional, so we can set up the following relation:

AB/EF = 1/4

We can also use the fact that the ratio of the areas of two similar figures is equal to the square of the ratio of their corresponding sides. Therefore,

AB²/EF² = (Area of square ABCD)/(Area of square EFGH)

Substituting the given values:

AB²/EF² = (Area of square ABCD)/(14400)

Since the areas of squares are proportional to the square of their sides, we can write,

Area of square ABCD/Area of square EFGH = (AB/EF)²

Substituting this into the above equation and solving for AB, we get,

AB²/EF² = (AB/EF)²

AB² = (AB/EF)² * EF²

AB² = (1/4)² * 14400

AB² = 900

AB = 30 feet

Therefore, the length of the side AB of square ABCD is 30 feet.

Learn more about squares on

https://brainly.com/question/28776767?referrer=searchResults

#SPJ4

Answer:

Step-by-step explanation:

24=100°

28=x

24x=2800(cross multiply)

x=200

The car sticker information indicates a highway average of 27 mpg, while the sample mean's standard deviation is around 1.455 mpg. The mean estimate's margin of error is roughly 3.06 mpg.

The simplest approach to figure out your gas mileage is to simply divide the distance driven by the quantity of petrol your car required to fill up. That amounts to kilometers traveled divided by petrol consumed.

a) The formula for the standard deviation of the sample mean, σx¯, is:

σx¯ = σ / sqrt(n)

where σ is the standard deviation of the population, and n is the sample size. In this case, σ = 6.5 mpg and n = 20. So,

σx¯ = 6.5 / sqrt(20) ≈ 1.455 mpg

b) To find the margin of error for the mean estimate at a 95% confidence level, we can use the following formula:

Margin of error = z* (σx¯)

where z* is the critical value for a 95% confidence interval, which is 1.96.

Therefore, the margin of error = 1.96 * 1.454 = 2.85 mpg.

c) To find the 95% confidence interval for the mean highway mpg for this vehicle, we can use the following formula:

Confidence interval = x¯ ± Margin of error

where x¯ is the sample mean, which can be calculated by adding up all the mpg readings and dividing by the sample size:

x¯ = (37.2+21.0+17.4+29.2+7.4+27.0+36.9+38.8+35.3+32.3+19.0+26.1+25.8+41.4+34.4+32.5+26.5+28.2+22.1) / 20

= 29.231 mpg

To know more about standard deviation visit:-

https://brainly.com/question/23907081

#SPJ1

The solution is, (a/2) ^4  or a^4/16 is in Simplest Form of (8a^3)^-4/3.

An exponent refers to the number of times a number is multiplied by itself. For example, 2 to the 3rd (written like this: 23) means: 2 x 2 x 2 = 8. 23 is not the same as 2 x 3 = 6. Remember that a number raised to the power of 1 is itself.

here , we have,

(8a^-3)^-4/3

split into two parts

8^ -4/3   *  (a^-3)^-4/3

using the power to the power rule we can multiply the exponents

8^(-4/3)  *a^(-3*-4/3)

8^ (-4/3) * a^(4)

replace 8 with 2^3

(2^3)^(-4/3) * a^(4)

using the power to the power rule we can multiply the exponents

2^(3*-4/3) * a^(4)

2 ^ (-4) * a^4

the negative exponent means it goes in the denominator if it is in the numerator

a^4/2^4

make a fraction

(a/2) ^4

or a^2/16

Hence, The solution is, (a/2) ^4  or a^4/16 is in Simplest Form of (8a^3)^-4/3.

To learn more on exponent number click:

brainly.com/question/19467739

#SPJ2