Help asap for 20pts
1. A hawk is flying with a speed of 20.0 m/s over water when it accidentally drops a 2.5 kg fish. If the altitude of the bird is 5.0 m and friction is disregarded, what is the mechanical energy of the system, and what is the speed of the fish when it hits the water?
2. A 740 N diver drops from a board 8.0 m above the water’s surface. Find the mechanical energy of the system, and find the diver’s speed 4.0 m above the water’s surface.
3. A runner leaps over a hurdle. If the runner’s initial vertical speed is 2.0 m/s, how much will the runner’s center of mass be raised during the jump?
4. A pendulum bob is released from some initial eight such that the speed of the bob at the bottom of the swing is 2.2 m/s. What is the initial height of the bob?
5. Is conservation of mechanical energy likely to hold in these situations?
​a. a hockey puck sliding on a frictionless surface of ice
​b. a toy car rolling on a carpeted floor
​c. a baseball being thrown into the air

Answers

Answer 1

The velocity of the fish when it hits the water is 22.3 m/s.

The velocity of the diver is 8.85 m/s.

The height to which the runner’s center of mass is raised during the jump is 0.204 m.

Initial height of the bob is 0.224 m.

1) Speed of the bird, v₁ = 20 m/s

Mass of the fish, m = 2.5 kg

Height of the bird, h₁ = 5 m

The total mechanical energy of the fish before dropping is equal to that after dropping.

Total energy = KE + PE

1/2 mv₁² + mgh₁ = 1/2mv₂² + 0

Multiplying both sides by 2,

v₁² + 2gh₁ = v₂²

Therefore, the velocity of the fish when it hits the water is,

v₂ = √(v₁² + 2gh₁)

v₂ = √(20² + 2 x 9.8 x 5)

v₂ = 22.3 m/s

2) Weight of the diver, W = 740 N

Height from which the board is dropped, h = 10 m

W = mg

Therefore, mass of the diver,

m = W/g

m = 740/9.8

m = 108.82

So, the potential energy of the diver is converted into kinetic energy of the diver.

mgh + 0 = 1/2 mv²

v²= 2gh

Therefore, velocity of the diver is,

v = √2gh

v = √2 x 9.8 x 4

v = 8.85 m/s

3) Velocity of the runner, v = 2 m/s

KE = PE

1/2 mv² = mgh

v²/2 = gh

Therefore, the height to which the runner’s center of mass is raised during the jump is,

h = v²/2g

h = 2²/(2 x 9.8)

h = 0.204 m

4) Speed of the bob, v = 2.2 m/s

Initial height of the bob is,

h = v²/2g

h = (2.2)²/(2 x 9.8)

h = 0.224 m

To learn more about mechanical energy, click:

https://brainly.com/question/29979940

#SPJ1


Related Questions

What are the half lives for uranium-235 and uranium-238?
a.
The half-life of uranium-235 is 713 seconds, the half-life of uranium-238 is 4.5 minutes
c.
The half-life of uranium-235 is 713,000,000 years, the half-life of uranium-238 is 4,500,000,000 years
b.
The half-life of uranium-235 is 713 days, the half-life of uranium-238 is 450 days
d.
None of the above

Answers

Answer:

C. The half-life of uranium-235 is 713,000,000 years, the half-life of uranium-238 is 4,500,000,000 years

Which situation involves kinetic energy being transformed into sound energy?

Answers

Answer:

c

Explanation:

this is because you move ( kinetic energy) your hands and clap the other person's hand, you will definitely hear sound right.

Answer:

c

Explanation:

When they move their hands together their energy transforms to sound energy.

if a town was 90 miles away and you travel at 45 mph how long would it take to get there

Answers

Answer:

t = 2 hours

Explanation:

Given that,

Distance of the town, d = 90 miles

Speed, v = 45 mph

We need to find the time to get there. The speed of an object is given by :

[tex]v=\dfrac{d}{t}[/tex]

Where

t is time

[tex]t=\dfrac{d}{v}\\\\t=\dfrac{90}{45}\\\\t=2\ h[/tex]

So, the required time is 2 hours.

if anyone has course hero could you send me the Gizmo Fan Cart Physics?

Answers

Answer:

I might be able to help, but I also might not. I need to check if I can get you the answer.

Explanation:

What would the acceleration of a car be from a stoplight if it started at 0 m/s and reached a
speed of 100 m/s in 7.8 seconds?

Answers

Answer:

The acceleration of a car would be:  [tex]a=12.8[/tex] m/s²

Explanation:

Given

Initial velocity = [tex]v_1=0[/tex] m/s

Final velocity = [tex]v_f=100[/tex] m/s

Time elapsed = [tex]t = 7.8[/tex] s

To determine

We need to determine the acceleration of a car.

We know that acceleration is basically the rate of change in velocity over time.

Thus,

We can determine the acceleration using the formula

[tex]\:\:\:a=\:\frac{v_f-v_i}{t}[/tex]

where

[tex]a[/tex] is the acceleration[tex]v_1[/tex] is the initial velocity[tex]v_f[/tex] is the final velocity[tex]t[/tex] is time elapsed

now substituting the values [tex]v_1=0[/tex],  [tex]v_f=100[/tex], and [tex]t = 7.8[/tex] in the formula

[tex]\:\:\:a=\:\frac{v_f-v_i}{t}[/tex]

[tex]a=\:\frac{100-0}{7.8}[/tex]

[tex]a=\frac{100}{7.8}[/tex]

[tex]a=12.8[/tex] m/s²

Therefore, the acceleration of a car would be:  [tex]a=12.8[/tex] m/s²

What characteristic is necessary for the uranium in a nuclear reactor?

Answers

Answer:

U-235

Explanation:

a rare needed compound

Why can’t the high-quality energy released from a lump of burning coal be recycled?

Answers

Answer:

when energy changes from one form to another, it always goes from a more useful to a less useful form. This means that people can't recycle or reuse high quality energy to perform useful work.

When energy changes from one form to another, it always transitions from a more helpful to a less useful one. Because of this, people are unable to reuse or recycle high-quality energy to complete crucial tasks.

What is the term of burning coal?

Coal is most frequently and significantly used in combustion, where heat is produced to create steam, which in turn powers the turbines that generate electricity. All living things, including humans, are composed of carbon. However, as coal burns, its oxygen reacts with airborne oxygen to generate carbon dioxide. Although dioxide (CO2) is an odourless, colourless gas, it is one of numerous gases found in the atmosphere that can retain the heat from the planet.

Why is burning coal a problem?

It's a major issue for climate change since it produces more carbon dioxide when burned than oil or gas. In addition to producing microscopic soot particles and hazardous substances like arsenic and mercury, coal also contributes to air pollution.

To know more about Burning coal visit:

https://brainly.com/question/28813633

#SPJ2

Solve this question I don't get it

Answers

Answer:

idek

Explanation:

An instant soup is very low in fat and calories but high in sodium. Can this food be labeled “ healthy”?

Answers

Answer:

no

Explanation:

it is not healthy because sodium is not good to our body

No it is not healthy.

The following information should be considered:

The instant soup is the processed food and it have the expire time of about 6 months.If we make the soup homemade than it will be okay for only 1 or 2 foods. Also it is high in sodium.

Learn more: brainly.com/question/17429689

Which angle allows the soil to receive the most direct light from the lamp?
0 degrees
20 degrees
45 degrees
90 degrees

Answers

D. 90 degrees

Hope this helped !

Answer:

D. 90 degrees

Explanation:

just finished lab

Mr. Rosa sees a random flying object headed towards his student’s face. He sprints at 13 m/s in 2 seconds. How fast did Mr. Rosa accelerate to save his student?
What is your known?
What is your unknown?
Plug it in.
What is your answer?

Answers

Answer:

13m/s

Explanation:

actually the answer is already given the thing which is not given is the distance which is 26 m which Mr Rosa walked it in 2 secs

hope it helps you

please mark me as brainlist

work out

A rectangular block of mass 20 kg lies with a side 0.2m by 500cm on a tab
What is the pressure exerted by its weight on the table?​

Answers

Explanation:

force/area=pressure

force=10*mass

area=0.2*500

pressure=200/100=2

A wave hits an object as shown. A vertical line with Medium 1 to the left and Medium 2 to the right. An arrow from the left reaches the line. An arrow starts from the same point on the line and goes right at a different angle. Which kind of wave interaction is shown?

Answers

Answer:

refraction

Explanation:

When the wave moves from medium 1 to medium 2, then the wave gets refracted. Then the correct option is C.

What is the wave?

A wave is an energetic disturbance in a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic intensity, an electric potential, or a change in temperature are a few examples.

A wave is a dynamic disturbance of one or more variables that propagates in physics, geometry, and related sciences. When waves oscillate frequently around an equilibrium value at a certain frequency, they are said to be periodic.

The bending of waves as they go from one substance to another is known as wave refraction. It bends when the wave enters a new material because the wave's speed changes. The optical density or index of refraction of the material affects how light waves bend.

Thus, the correct option is C.

More about the wave link is given below.

https://brainly.com/question/29334933

#SPJ6

The missing options are given below.

absorption

diffraction

refraction

reflection

4. Find the valency of atoms of chlorine, sulphur and magnesium.​

Answers

Answer:

1. Chlorine = 7 valence electrons.

2. Sulphur = 6 valence electrons.

3. Magnesium = 2 valence electrons.

Explanation:

In Chemistry, valence electrons can be defined as the number of electrons present in the outermost shell of an atom. Valence electrons are used to determine whether an atom or group of elements found in a periodic table can bond with others. Thus, this property is typically used to determine the chemical properties of elements.

1. Chlorine = it is an element found in group (7) of the periodic table known as halogens and as such it has 7 electrons in its outermost shell. Therefore, Chlorine has seven (7) valence electrons.

Sulphur = this element is found in group (6) of the periodic table and as such it has 6 electrons in its outermost shell. Therefore, Sulphur has six (6) valence electrons.

Magnesium = this element is found in group (2) of the periodic table and as such it has 2 electrons in its outermost shell. Therefore, Magnesium has two (2) valence electrons.

What is the displacement of a car in 50 s if it is travelling with a velocity of 25 m/s?

Answers

Answer:

v =25 m/s

time= 50 s

Velocity =Displacement/Time

Displacement = Velocity × Time

S = 25×50

s=1250m

Explanation:

v =25 m/s

time= 50 s

Velocity =Displacement/Time

Displacement = Velocity × Time

5. Identify the reactants in this chemical equation:
2H3PO4 → HAP20, +H2O

Answers

Answer:

H=Hydrogen, PO4=Phosphate

Explanation:

Reactions are on the left side of arrow and products are on the right side of arrow.

Mary takes a trip to California for her vacation. Her airplane leaves Boston and flies 3,000 miles west, arriving in San Francisco 6 hours later. What was the plane’s velocity? Calculate and include proper units!

Answers

Answer:

two hr lead =90 miles

90/15=6hrs

2+6=8pm

Explanation:

Will mark as brainliest !! plz answer it

Plzzz answer with explnation!!!

the value of acceleration due to gravity (g) will be maximum at:
.
a) 1/2 of the radius of earth

b) 1/4 of the radius of earth

c) 1/8 of the radius of earth

Answers

I answered first on your other comment!

Which type of protist is animal AND plant like?

Answers

Answer:

Protists are called plant-like, fungus-like and animal-like because they share some of the characteristics of plants, fungi and animals, even though they belong in a different category: the kingdom Protista.

Explanation:

Can somebody plz help me with this one the question is in the screen shot.

Answers

this is in order.

LANDFILL

GROUNDWATER

PESTICIDE

FERTILIZER

HAZARDOUS WASTE

SEPTIC SYSTEM

SEEPAGE

Which of the following is a variable property for a gas? Select all that apply.

shape
mass
volume
density

Answers

Answer:

volume

Explanation:

mass density and shape are not variable to my view.

pressure volume

number of moles and temperature are variable

True or False:
Sensations of heaviness and lightness are always associated with changes in a person's weight. A person who feels light has lost weight and a person who feels heavy has gained weight.

If False, explain why the statement is false.

If True, explain why the statement is true.

Answers

False, you can feel heavy but not gain weight

It's not true, no. The weight can be used to calculate an object's product of mass, but not gravity. The object's mass is multiplied by gravity, as is evident. However, an object's mass will never be 0 and will always be constant, its weight would be zero if there is no gravity. Since mass and weight are not the same, the assertion is untrue.

What is Weight?

Weight is the gravitational pull of a large second object, thus the Moon or the Earth, at the first object. Weight is a result of the universal law of gravity, according to which any two objects will gravitationally pull one another with a force exactly equal to the applied of their masses and divided by the square of a distance separating them.

Because of this, larger items naturally weigh more when placed in the same spot; yet, the farther any object seems to be from the Earth, the less weight it has.

Because of the tiny difference in size between the polar and equatorial radii of the Earth, an object's weight at the South Pole is somewhat higher than its value at the Equator.

To know more about Weight:

https://brainly.com/question/10069252

#SPJ2

Some one plz help me I am so confused

Answers

Answer:

1. the attractive force that holds atoms or ions together

2. the average distance between the nucleus of two bonded atoms

3. the angle formed by two bonds to the same atom

A 80.0 kg person on rollerblades pushes against a 700. Kg box on wheels with a force of 50.0 N and they roll away from each other. The person accelerates to the left and the box accelerates to the right.

Answers

Answer:

 person a₁ = -0.625 m / s², box a₂ = 0.0714 m / s²

Explanation:

In this exercise we have a problem of action and reaction forces, the force with which the person (action) pushes the box is of the same magnitude as the force with which the box (reaction) pushes the person, but in the opposite direction.

We work that body separately

Person

           -F = m₁ a₁

             a₁ = -F / m₁

             a₁ = -50.0 / 80.0

             a₁ = -0.625 m / s²

the negative sign means that the person moves away from the box

Box

            F = m₂ a₂

            a₂ = F / m₂

            a₂ = 50.0 / 700

            a₂ = 0.0714 m / s²

A person does 15 J of work moving a couch 1.3 m. How much force was used?​

Answers

Answer:

11.53 N.

Explanation:

Work = Force * Displacement

W= 15 J

D = 1.3

And now you solve for Force.

15= 1.3F

F= 11.53 N



The seed planted at extreme cold or in the region of frozen ice do not germinate, why?​

Answers

Answer:

yes

The the seed planted at Extreme cold or in the region of frozen I did not germinate because the amount of moisture of the seed is too high which results in lack of air of the sea in the frozen ice

In fact, a soil temperature below 50°F might be problematic for many garden plants. Seeds will quickly absorb water at 40°C, but they won't begin to grow. This presents a risk for rot and disease, which may cause damping-off or subpar growth.

What is germination of seed?

The formation of the seedling is the consequence of germination, which is often the growth of a plant inside a seed. It is also the process of the seed's metabolic machinery being reactivated, which causes the radicle and plumule to emerge. A vascular plant's seed is a little bundle that develops in a fruit or cone as the result of the union of the male and female reproductive cells.

Given the need for particular internal or external stimuli to resume growth, dormant seeds are viable seeds that do not germinate. When the right circumstances are present, the seed starts to germinate and the embryo starts to grow again, eventually becoming a seedling.

Learn more about  germination  here:

https://brainly.com/question/1675149

#SPJ2

Each external force acts on the system for 10 seconds. Rank the change in momentum of each of the cart-cart systems from largest to smallest. (The label of “m” or “2 m” desginates the relative mass of each cart.)

It is possible to have some of the categories below BLANK since you may have items that are EQUAL to each other.
Put the largest as far up as you can, and the smallest as far down as you can

Answers

Answer:

thanks me later

PLEASS MARK ME AS BRAINLIEST ANSWER

The biological levels of organization range from a single organelle all the way up to the biosphere in a highly structured hierarchy. Your lab partner is struggling to understand the interaction between the levels in the biological hierarchy. Using the model, what explanations can your offer to help your classmate? Choose ALL that apply.
A) R makes up Q which makes up P which makes up S.
B) Cells that work together make up tissues, which comprise organs.
C) Similar cells working together make up organs which make up organ systems.
D) In the model, the animal cells make up tissues such as muscle or connective tissue.
E) Organs, such as the stomach and intestines, make up organ systems which interact with one another to maintain homeostasis.

Answers

The model that depicts the concept of biological levels of an organization which is ranging from single organelle to biosphere is explained by all the options given except for options A and C.  

Biology is specifically the study that deals with various forms of life. Since life is considered a vast topic, scientists classified this broad system into different organizational levels for better understanding.

The Biological levels of the organization are described as follows:  

The biological level of organization of any living form is depicted and arranged from the simplest forms to the complex ones and thus, the order tends to start from organelles to the biosphere. The elaborated levels are in ascending order as organelles, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere respectively. Each level tends to combine with one another to give rise to the next level. One such example is that the cells that tend to work together make up the tissues, which further comprise the organs. Similarly, organ systems are formed by the interaction between certain organs in order to maintain homeostasis.

Considering all these facts, option C represents the statement that is incorrect as the cells cannot directly form organs without forming tissues and the letters in option A is not specific. And thus, we can conclude that except for options A and C, all the other options correctly depict the model of the Biological levels of the organization.

Learn more about the Biological levels of the organization here:

https://brainly.com/question/20702808

Sound will travel slowest through which medium?

Answers

Ice at -25
Hope this helps
May God bless you and your family

Assignments
1. A shopper pushes a grocery cart 20.0 m at constant speed on level ground, against a 35.0 N
frictional force. He pushes in a direction 25.0" below the horizontal. (a) What is the work done
on the cart by friction? (b) What is the work done on the cart by the gravitational force? (c)
What is the work done on the cart by the shopper? (d) Find the force the shopper exerts, using
energy considerations. (e) What is the total work done on the cart?​

Answers

Hello there!

I hope you and your family are staying safe and healthy during this unprecendented time.

A) What is the work done?

Answer: We need to use the formula

[tex]w=-F_f(d)[/tex]

[tex]w=-(35)(20)[/tex]

[tex]w=-700J[/tex]

B) What is the work done on the cart by the gravitational force?  

Alright, we know that the gravitional force is perpendicular to the diplacement. Therefore, we gonna use the following formula:

[tex]w=Fdcos90[/tex]

[tex]w=0[/tex]

C) What is the work done on the cart by the shopper?

This is the easier part, since we already know that the work done by the shopper is the same as the work done by the friction force

[tex]W shopper + W friction = 0\\W shopper = W-friction \\W shopper = 700J[/tex]

D) Find the force the shopper exerts, using energy considerations.

[tex]F_f+Fcos25=0\\-35+Fcos25=0\\F=38.6N[/tex]

E) What is the total work done?

You just need to add them:

[tex]w=wshopper+wfriction\\w=0[/tex]

Other Questions
C&A has on average $6000 in inventory and its daily sales are $200. What are C&As weekly inventory turns (assuming demand occurs seven days a week)?A. 85.7B. 28.6C. .23D. 0.3 stage directions indicating the use of flashing lights and loud, uptempo music might help to create which mood? True/False: garmo co. has an operating leverage of 5. next year's sales are expected to increase by 10%. the company's operating income will increase by 50%. You are in a sleep lab and have just been hooked up to to several machines. Researchers are interested in measuring your .a. eye movementsb. brain wavesc. muscle activityd. all of these A 2000W carbon dioxide laser emits an infrared laser beam with a wavelength of 10.6?m. How many photons are emitted per second?N=___ photon per secondQuantum number of the hydrogen atom comes closest to giving a 500-nm-diameter electron orbit is N=69What is the electron's speed in this state? After reading these paragraphs, the reader can most likely conclude that pu yi according to howard gardner, gardeners and farmers are , and they need intelligence to do their jobs well. which of the following explanations can account for virginia having produced eight presidents? A store owner wants to make a candy mix that sells for $1 per pound. He has 50lb of sugar candies that sell for $1. 20 per pound. How many pounds of gummy candies worth 80 cents a pound should he add reluctant lenders, low expectations related to sales and profit, and the liquidity trap are all constraints on monetary To be done in C# Description of the class Class properties for each attribute listed with the class with public get and set accessors Implement other methods as described in the class descriptions/UML diagramThe main application must do the following Print a line that states "Your Name - Week 1 Composition Performance Assessment" Create 2 instances of the Automobile class using parameters of your choosingAdd at least 2 tires to the instancesAdd some tires by passing a Tire object to the AddTire methodAdd some tires by passing the parameters to create a Tire object to the AddTire methodPrint one of the instance's properties to the console using the ToString methodPrint one of the instance's properties to the console using the GetInfo methodPrint the following for one of the instances using property accessors (all information must be included; formatting and order is up to you):Make, Model, Color, Body Style, Engine Information, Number of Cylinders, Approved Gas Type, Fuel Injected?Tire Information for each tireManufacturer, Tire Size, Max Pressure, Min Pressure, and Type Class Descriptions & Additional RequirementsClass Automobile will be the class that is composed of other classes and will have the properties and methods described belowProperties:Make - type string, the automobile manufacturer (e.g., Ford, Jaguar)Model-type string, the model description (e.g., Explorer, Navigator)Color - type string, the car's colorBodyStyle - type string, car style description (e.g., Sedan, SUV)EngineInfo - type Engine, engine information object (see Engine Class for details)Tires - collection of type Tire, list/array of the tire objects included in the automobileMethods:GetInfo() - gets formatted (you determine the format) class information including: Make, Model, Color, Engine Cylinder Count, Fuel Injected or Not, and Number of TiresToString() - gets all class information, you determine the formatAddTire(Tire) - adds a tire object to the Tires propertyAddTire(string, string, int, int, string) - adds a tire object to the Tires collection via parametersClass EnginePropertiesCylinders - type integer, the number of cylinders the engine hasGasType - type string, approved type of fuel, e.g., Diesel, Unleaded 87 octane, Ethanol FreeFuellnjected - type bool, whether the engine is fuel injected or carburetor-basedMethodsNo additional required methods; you may create additional methods at your discretionClass TirePropertiesManufacturer - type string, the tire manufacturer, e.g., Continental, PirelliSize - type string, the tire size, e.g., 185/60R13, 165/50R15MaxPressure-type integer, the maximum pressure for the tireMinPressure - type integer, the minimum pressure for the tireType - type string, the type of tire, e.g. All Season Radial, Studded Snow, SpareMethodsNo additional required methods; you may create additional methods at your discretionAutomobile 1 is to use ToString()Automobile 2 is to use GetInfo() Does the plastic that the water prism is made of affect your results for the index of refraction? That is are your index values too high, too low, or not affected Which of the following statements about the way the mass of a white dwarf affects spacetime is correct?a. the white dwarf mass will attract light, and pull it in a curved path; spacetime is not affected b. the white dwarf mass will curve spacetime; light has to follow that curvaturec. the white dwarf mass will not affect spacetime at all; only black holes affect spacetimed. the white dwarf mass will have enough gravity to straighten out any curvature in spacetime; so spacetime near the white dwarf will be flate. since no experiments have ever tested Einsteins theory of general relativity, it is impossible to say what will happen which of the following statements about estuaries is not true? view available hint(s)for part a which of the following statements about estuaries is not true? estuaries occur where coastal marine waters are semi-enclosed and are diluted by freshwater flows. most estuarine species are pelagic. salinity is the most important factor in determining the distribution of estuarine species. often rivers flowing into estuaries provide relatively few nutrients other than phosphorus. oysters can be a dominant organism and form reefs wherever the bottom is hard. HELP answer and explanation! 1. What pressure of H2 gas is produced if 22.98 g of Al is reacted with excess HCl in a sealed 17.9 L container at a temperature of 300 K?4 Al(s) + 7 HCl(aq) ---> 4AlCl3(aq)+6H2(g)First, calculate the number of moles of H2 formed in this reaction and show the conversions required to solve this problem.22.98 g Al * ( ___ / ___) * ) (___/___) = 1.29 mol H2Answer Bank: 3 mol H2, 2 mol Al, 1 mol Al, 26.98 g Al, 1 mol HCl, 2.02 g H2, 1 mol AlCl3, 2 mol AlCl3, 133.34 g AlCl3, 36.46 g HCl, 6 mol HCl, 1 mol H2.1b. In the reaction MgCO3(s) ---> MgO(s) + CO2(g) what magnesium carbonate, MgCO3, is required to produce 515 L of carbon dioxide, CO2, measured at STP?mass: ______ g A kite is flying 12 ft off the ground. Its line is pulled taut and casts a 5-ft shadow. Find the length of the line. If necessary, round your answer to the nearest tenth. 5 - mi familiamultiple choice activity 1 attempt left due may 3rd 11:59 pm instructionslisten to the description and indicate if the statements are cierto or falso. during the message development process, business professionals should identify the ______ their ideas clearly. Rather than standardizing their advertising globally, some companies follow a strategy of __________, fully adapting their advertising messages to local markets.A.product inventionB.communication adaptationC.product adaptationD.straight product extensionE.channel adaptation