Answer:
the partial pressure of argon in the mixture is 91.2 kPa.
Explanation:
To find the partial pressure of argon, we need to first calculate the total pressure contributed by the other gases in the mixture:
Total pressure = Partial pressure of He + Partial pressure of Ne + Partial pressure of Ar
We can convert the pressure of He and Ne into units of kPa to match the units of the total pressure:
Partial pressure of He = 0.522 atm x 101.325 kPa/atm = 52.9 kPa
Partial pressure of Ne = 322 mmHg x 1 kPa/7.5006 mmHg = 42.9 kPa
Substituting these values and the given total pressure into the equation above, we can solve for the partial pressure of Ar:
187 kPa = 52.9 kPa + 42.9 kPa + Partial pressure of Ar
Partial pressure of Ar = 187 kPa - 52.9 kPa - 42.9 kPa
Partial pressure of Ar = 91.2 kPa
Therefore, the partial pressure of argon in the mixture is 91.2 kPa.
Write a hypothesis about what will happen to the air in the plastic bottle when its temperature is decreased. What relationship do you expect to find between temperature and volume?
When the temperature of the air inside a plastic bottle is decreased, the hypothesis suggests that the volume of the air will decrease due to the inverse relationship between temperature and volume, known as Charles's Law.
The hypothesis proposes that when the temperature of the air inside a plastic bottle is decreased, the volume of the air will decrease as well. This prediction is based on Charles's Law, which states that the volume of a gas is directly proportional to its temperature when pressure and the amount of gas remain constant.
According to this law, as the temperature decreases, the kinetic energy of the gas molecules decreases, causing them to move more slowly and collide less frequently with the container walls. Consequently, the average distance between gas molecules decreases, resulting in a reduction in volume. Therefore, the hypothesis posits that as the temperature of the air in the plastic bottle decreases, the volume of the air will also decrease, following the principles of Charles's Law.
Learn more about Charles's Law here: brainly.com/question/14842720
#SPJ11
When pH changes from 4.0 to 6.0, the [H] A) decreases by a factor of 2 B) decreases by a factor of 100 C) increases by a factor of 100 D) increases by a factor of
The correct answer is B. When the pH changes from 4.0 to 6.0, the [H+] (concentration of hydrogen ions) decreases by a factor of 100.
First, let's define what we mean by pH. pH is a measure of the concentration of hydrogen ions (H+) in a solution. The pH scale ranges from 0 to 14, with 0 being the most acidic, 14 being the most basic, and 7 being neutral.
When the pH changes from 4.0 to 6.0, we are moving two units up the pH scale, which means the solution is becoming less acidic and more basic.
To determine how the concentration of hydrogen ions changes with a change in pH, we can use the equation:
pH = -log[H+]
This equation tells us that the concentration of hydrogen ions is inversely proportional to the pH. In other words, as the pH goes up, the concentration of hydrogen ions goes down, and vice versa.
To calculate the change in concentration of hydrogen ions when the pH changes from 4.0 to 6.0, we can use the equation:
[H+]1/[H+]2 = 10^(pH2 - pH1)
Where [H+]1 is the initial concentration of hydrogen ions at pH 4.0, [H+]2 is the final concentration of hydrogen ions at pH 6.0, and pH1 and pH2 are the initial and final pH values, respectively.
Plugging in the values, we get:
[H+]1/[H+]2 = 10^(6-4) = 100
To know more about pH visit :-
https://brainly.com/question/30390372
#SPJ11
A student has a sample of 1.18 moles of fluorine gas that is contained in a 20.0 L container at 279 K. What is the pressure of the sample? The ideal gas constant is 0.0821 L*atm/mol*K. Please round the answer to the nearest 0.01 and include units.
thank you in advance!
The fluorine gas sample has a pressure of 2.21 atm, rounded to the closest 0.01. Atmospheres (atm) are the units of pressure.
We may use the ideal gas law to calculate the pressure of the fluorine gas sample, which specifies that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we must convert the temperature from Celsius to Kelvin by multiplying it by 273.15. As a result, the temperature is 279 K.
Then we can plug our values into the ideal gas law equation:
P(20.0 L) = (1.18 mol)(0.0821 L*atm/mol*K)(279) K
When we simplify the equation, we get:
P = (1.18 mol)(0.0821 L*atm/mol*K)(279 K)/20.0 L
For more such questions on pressure
https://brainly.com/question/28012687
#SPJ11
do two identical half-cells constitute a galvanic cell? (look at e and f)
Yes, two identical half-cells can indeed constitute a galvanic cell. In fact, this is often the case in laboratory experiments where the focus is on understanding the principles of electrochemistry.
A galvanic cell is made up of two half-cells, each of which contains an electrode and an electrolyte solution. When the two half-cells are connected by a wire and a salt bridge, a flow of electrons occurs from the electrode with the higher potential to the electrode with the lower potential. This creates a current that can be used to do work.
In the case of two identical half-cells, the two electrodes have the same potential, so there is no potential difference between them. As a result, there will be no net flow of electrons and no current will be generated. However, this setup can still be useful for certain types of experiments, such as those that focus on the behavior of specific electrolytes or the effects of temperature on electrochemical reactions.
Know more about Galvanic Cells here:
https://brainly.com/question/13031093
#SPJ11
Find the ph of a buffer that consists of 0.85 m hbro and 0.67 m kbro.
The pH of a buffer containing 0.85 M HBrO and 0.67 M KBrO is approximately 4.42.
A buffer solution consists of a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([base]/[acid]), where pKa is the dissociation constant of the weak acid and [base] and [acid] are the concentrations of the conjugate base and acid, respectively.
In this case, HBrO is a weak acid and its conjugate base is BrO-. The dissociation constant (Ka) for HBrO is 2.3 x 10^-9. Therefore, the pKa of HBrO is 8.64. Using the Henderson-Hasselbalch equation, we can calculate the pH of the buffer as follows:
pH = 8.64 + log([BrO-]/[HBrO])
pH = 8.64 + log(0.67/0.85)
pH ≈ 4.42
Thus, the pH of the buffer is approximately 4.42. Since the pH is less than 7, the solution is acidic.
learn more about pH here:
https://brainly.com/question/27945512
#SPJ11
Given the Lewis structure for SF2, indicate the steric number of the central atom and identify the hybridization of the central atom. Steric Number: steric number Hybridization: Choose one:
The steric number for the central atom in SF2 is 3 and its hybridization is sp2. This can be determined by counting the number of atoms bonded to the central atom (two fluorine atoms) and the number of lone pairs on the central atom (one lone pair). The steric number is the sum of these values.
The hybridization of the central atom in SF2 is sp2. This is because the steric number is 3, which corresponds to an sp2 hybridization. The three hybrid orbitals are used to form the three sigma bonds with the fluorine atoms and the lone pair occupies one of the unhybridized p orbitals.
The steric number is determined by counting the number of atoms bonded to the central atom and the number of lone pairs on the central atom. In this case, there are two bonded fluorine atoms and one lone pair, giving a steric number of 3. The hybridization is determined by the steric number, which corresponds to sp2 hybridization in this case.
The hybridization of the central atom is determined by the steric number. A steric number of 3 corresponds to sp2 hybridization. This means that the central atom uses three hybrid orbitals to form sigma bonds with the fluorine atoms, and the lone pair occupies one of the unhybridized p orbitals.
Overall, the steric number of the central atom in SF2 is 3 and its hybridization is sp2.
To know more about hybridization refer to
https://brainly.com/question/30010106
#SPJ11
Let's say the Tums® company wants to test the efficiency of their antacid. If the gas in number 2 was collected over water at those conditions, and the observed amount of "wet" gas was 2. 53L, what was the actual yield of the CO2?
The actual yield of CO2 was less than 2.53L due to the presence of water vapor in the collected gas.
When gas is collected over water, it can contain water vapor, which adds to the observed volume. To determine the actual yield of CO2, the volume of the water vapor needs to be subtracted from the observed volume. This can be done by using the ideal gas law and considering the vapor pressure of water at the given conditions.
By subtracting the vapor pressure of water from the total pressure, the pressure of the CO2 gas can be calculated. Then, using the ideal gas law, the volume of the CO2 gas can be determined. This volume represents the actual yield of CO2.
Therefore, the actual yield of CO2 is expected to be less than the observed volume of 2.53L when the gas was collected over water.
To learn more about ideal gas law click here
brainly.com/question/30458409
#SPJ11
Calculate how much 95% ethyl alcohol will be required to dissolve 0.3 g of sulfa-
nilamide at 78°C. Use the data for the graph in Technique 11, Figure 11.2 to make
this calculation.
The amount of 95% ethyl alcohol required depends on the data.
How can the amount of 95% ethyl alcohol needed?To determine the amount of 95% ethyl alcohol needed to dissolve 0.3 g of sulfanilamide at 78°C, it is necessary to refer to the data from Technique 11, Figure 11.2.
This graph provides information about the solubility of sulfanilamide in relation to the concentration of the solvent, which is 95% ethyl alcohol. By analyzing the graph, the concentration of sulfanilamide at 78°C can be determined.
Then, based on the desired solute concentration, the corresponding concentration of the solvent can be identified. This concentration can be used to calculate the amount of 95% ethyl alcohol required to dissolve the given mass of sulfanilamide.
By utilizing the data from the graph, the appropriate quantity of solvent can be determined to ensure successful dissolution of the sulfanilamide.
Learn more about alcohol
brainly.com/question/29268872
#SPJ11
Indicate whether solutions with each of the following ion concentrations are neutral, acidic, or basic at 25 °C: (a) [H+] = 4 x 10-9M; (b) (OH] = 1 x 10-7M; (c) [OH] = 1 X 10-13 M.
To determine whether solutions with the given ion concentrations are neutral, acidic, or basic at 25 °C, we can use the concept of pH and pOH.
pH is a measure of the hydrogen ion concentration ([H+]) in a solution, while pOH is a measure of the hydroxide ion concentration ([OH-]). The sum of pH and pOH is always equal to 14 at 25 °C:
pH + pOH = 14
Now let's analyze each case:
(a) [H+] = 4 x 10^(-9) M:
To determine the pH of this solution, we can take the negative logarithm (base 10) of the hydrogen ion concentration:
pH = -log([H+])
pH = -log(4 x 10^(-9))
pH ≈ 8.4
Since the pH is greater than 7, the solution is basic.
(b) [OH-] = 1 x 10^(-7) M:
To determine the pOH of this solution, we can take the negative logarithm (base 10) of the hydroxide ion concentration:
pOH = -log([OH-])
pOH = -log(1 x 10^(-7))
pOH = 7
Since the pOH is equal to 7 and pH + pOH = 14, the pH of this solution is also 7. Therefore, the solution is neutral.
(c) [OH-] = 1 x 10^(-13) M:
To determine the pOH of this solution:
pOH = -log([OH-])
pOH = -log(1 x 10^(-13))
pOH ≈ 13
Since the pOH is greater than 7, the pH of this solution is less than 7, making it acidic.
Learn more about ion concentrations here : brainly.com/question/29737756
#SPJ11
How many grams of magnesium chloride must be added to 766 mL of water to create a solution with an anion concentration equal to 0.898 M
To create a solution with an anion concentration equal to 0.898 M, you would need to add 58.32 grams of magnesium chloride to 766 mL of water.
To calculate the grams of magnesium chloride needed, we first need to determine the molar mass of magnesium chloride, which is 95.21 g/mol. We then convert the volume of water to liters by dividing 766 mL by 1000, giving us 0.766 L. Next, we use the formula for molarity, which is Molarity (M) = moles of solute / volume of solution in liters. Rearranging the formula, we find that moles of solute = Molarity × volume of solution in liters. Plugging in the values, we get moles of solute = 0.898 M × 0.766 L = 0.688668 mol.
Finally, we multiply the moles of solute by the molar mass to get the grams of magnesium chloride needed: 0.688668 mol × 95.21 g/mol ≈ 58.32 grams. Therefore, approximately 58.32 grams of magnesium chloride must be added to the water to create the desired solution.
To learn more about molarity click here
brainly.com/question/13386686
#SPJ11
If the starting volume of a hot air balloon is 55,500 m3and the initial
temperature is 21 °C, what is the temperature inside the balloon is the final volume is 74,000 m3.
Explain why the volume of the balloon increases when temperature is increased in terms of average
kinetic energy, collisions and volume. Explain how the balloon is actually able to lift off the ground
in terms of density. (Useful info: density of hot air is 0. 946 kg/m3 and the density of normal (ambient
air) is 1. 2 kg/m3. )
The temperature inside the balloon is [tex]28.2 ^0C[/tex]. When temperature increases, the volume of the balloon also increases due to the relationship between temperature and average kinetic energy. As the air inside the balloon is heated, it becomes less dense than the ambient air.
To calculate the temperature inside the hot air balloon, we can use the relationship between volume and temperature, known as Charles's Law. When the volume of a gas is directly proportional to its temperature when pressure is constant is known as Charles's Law. The initial volume in this case is [tex]55,500 m^3[/tex] and the initial temperature is 21 °C, while the final volume is [tex]74,000 m^3[/tex]. By setting up a proportion, we can solve for the final temperature:
[tex](55,500 m^3 / 21 ^0C) = (74,000 m^3 / x)[/tex]
Cross-multiplying and solving for x, we find that the temperature inside the balloon is approximately [tex]28.2 ^0C[/tex].
The average kinetic energy of the gas particles increases, when the temperature increases,This leads to more frequent and energetic collisions between the particles, causing them to move further apart. As a result, the volume of the gas expands.
The difference in density between the hot air inside the balloon and the surrounding ambient air is what allows the balloon to lift off the ground. Hot air has a lower density compared to normal air. As the air inside the balloon is heated, it becomes less dense than the ambient air. This difference in density creates a buoyant force, which is greater than the weight of the balloon and its contents. Consequently, the balloon lifts off the ground.
Learn more about buoyant force here:
https://brainly.com/question/20165763
#SPJ11
the biggest carcinogenic exposure in the workplace is___
The biggest carcinogenic exposure in the workplace is dependent on the specific industry and workplace conditions.
Some examples of common carcinogenic exposures in the workplace include exposure to asbestos in the construction and manufacturing industries, exposure to benzene in the oil and gas industry, and exposure to ionizing radiation in the healthcare industry.
Asbestos is a group of fibrous minerals that was widely used in construction and insulation materials due to its heat-resistant properties. Prolonged exposure to asbestos can lead to severe health issues, including lung cancer, mesothelioma, and asbestosis.
It is important for employers to identify potential carcinogenic exposures in their workplace and implement measures to reduce or eliminate them to protect the health and safety of their employees.
To know more about carcinogenic exposure, click below.
https://brainly.com/question/14207968
#SPJ11
The number of decibels,d, produced by an audio source can be modeled by the equation d=10 log (1/k), where 1 is the sound intensity of the audio source and K is a constant. How many decibels are produced by an audio source whose sound intensity is 1,000 times the value of k?
F. ) 4
G. ) 30
H. ) 40
J. )100
K. ) 10,000
An audio source with a sound intensity 1,000 times the value of k would produce 30 decibels of sound, as represented by option G.
The equation given to model the number of decibels produced by an audio source is d = 10 log (1/k), where 1 is the sound intensity and k is a constant. To find the number of decibels produced by an audio source with a sound intensity 1,000 times the value of k, we substitute 1,000 for 1 in the equation.
d = 10 log (1/k) becomes d = 10 log (1,000/k).
Since log (1,000/k) can be simplified as log(1,000) - log(k) = 3 - log(k), the equation becomes d = 10(3 - log(k)).
To further simplify, we can use the logarithmic property log(a) - log(b) = log(a/b). Therefore, d = 10 log(1,000/k) becomes d = 10 log(1,000/k) = 10 log(1,000) - 10 log(k) = 30 - 10 log(k).
This means that an audio source with a sound intensity 1,000 times the value of k would produce 30 decibels of sound. Therefore, the correct option is G.
Learn more about sound intensity here:
https://brainly.com/question/32194259
#SPJ11
Ksp= CaSO4 is 7.10 x 10-5 at 25 oC.
Calcium chloride, CaCl2 is a freely soluble salt. When a 0.50 M CaCl2 solution is prepared, the calcium chloride dissolves without establishing an equilibrium: CaCl2(s) ==========> Ca2+(aq) + 2Cl-(aq) In a 0.50 M CaCl2 solution, the concentration of Ca2+ will be 0.50 mol/L. When the CaSO4 is dissolved in this solution, it establishes its usual equilibrium between solid and the ions in solution: CaSO4(s) <----------> Ca2+(aq) + SO42-(aq) However, the presence of CaCl2 in this solution means there will be Ca2+ ions in solution even before the CaSO4 dissolves. What is the molar solubility of CaSO4 in a 0.50 M CaCl2 solution?
4.33 x10-8 mol/L
3.16 x 10-6 mol/L
1.42 x10-4 mol/L
6.33 x 10-2 mol/L
7.35 x 10-1 mol/L
The molar solubility of CaSO4 in a 0.50 M CaCl2 solution is: 3.16 x 10-6 mol/L.
When CaSO4 is dissolved in a 0.50 M CaCl2 solution, the concentration of Ca2+ ions in the solution is already 0.50 mol/L. Therefore, we need to calculate the solubility product constant (Ksp) of CaSO4 at this concentration of Ca2+ ions, which can be expressed as:
Ksp = [Ca2+][SO42-]
To calculate the molar solubility of CaSO4, we need to find the concentration of SO42- ions in solution. Since CaSO4 is a 1:1 electrolyte, the concentration of SO42- ions will also be equal to the concentration of CaSO4 in solution. Therefore:
Ksp = [Ca2+][SO42-] = (0.50 mol/L)(x)
Where x is the molar solubility of CaSO4 in the solution.
Solving for x, we get:
x = Ksp/[Ca2+] = (9.27 x 10-6)/(0.50) = 1.85 x 10-5 mol/L
Thus, the molar solubility of CaSO4 in a 0.50 M CaCl2 solution is 3.16 x 10-6 mol/L.
It is important to note that the presence of CaCl2 in the solution increases the concentration of Ca2+ ions, which decreases the solubility of CaSO4 in the solution.
Therefore, the molar solubility of CaSO4 in a 0.50 M CaCl2 solution is lower than the molar solubility of CaSO4 in pure water.
To know more about "Solubility" refer here:
https://brainly.com/question/17647006#
#SPJ11
Check all that apply: If saturated fatty acids predominate in a fat, the fat will
a. be a good source of essential fat (18:2) linoleic acid
b. be liquid at room temperature
c. always be rich in cholesterol
d. be solid at room temperature
If saturated fatty acids predominate in fat, the fat will most likely d. be solid at room temperature. This is because saturated fats have straight chains and can pack closely together, forming a solid mass. Some common examples of saturated fats include butter, lard, and coconut oil.
However, it is important to note that the presence of saturated fats does not necessarily mean that the fat will always be rich in cholesterol. Cholesterol is a separate molecule that is found in animal products like meat, eggs, and dairy. While some foods high in saturated fat may also be high in cholesterol, others may not.
Similarly, the presence of saturated fats does not guarantee that the fat will be a good source of essential fat (18:2) linoleic acid. Linoleic acid is an omega-6 fatty acid that is essential for human health, but it is not present in high amounts in most saturated fats. Instead, linoleic acid is found in foods like nuts, seeds, and vegetable oils.
Finally, whether fat is liquid or solid at room temperature depends on its fatty acid composition, not just whether it is saturated or unsaturated. For example, olive oil is high in monounsaturated fats but is still liquid at room temperature because it contains a low percentage of saturated fats.
To learn more about saturated fatty acids, refer:-
https://brainly.com/question/14118324
#SPJ11
and the title and number of the experiment. also include a completed table of reagents. name formula mol.-eq. mw mmol amount 3-nitrobenzamide 1.0 g 5.75leach (aq.)
Regarding bleach (aqueous solution), it is usually a solution of sodium hypochlorite (NaOCl).
Based on the information provided, I understand that you need help with an experiment involving 3-nitrobenzamide and a completed table of reagents. However, the title and number of the experiment are not provided. I will try to help you with the reagents table using the given information.
Reagents Table:
Name: 3-nitrobenzamide
Formula: C7H6N2O3
Mol-Eq: 1
Molecular Weight (MW): 166.14 g/mol
mmol: (1.0 g) / (166.14 g/mol) = 0.00602 mol (6.02 mmol)
Amount: 1.0 g
To know more about Bleach visit:
https://brainly.com/question/29442556
#SPJ11
balance the following oxidation-reduction reaction in basic solution. sio2 y→si y3
The balanced equation of the oxidation-reduction reaction in basic solution is:
SiO₂ + 2Y + 2H₂O + 4e- → Si + Y³⁺ + 4OH⁻What is the balanced equation?The equation is balanced in basic solution as follows:
Unbalanced equation:
SiO₂+ Y → Si + Y³⁺
Balance the elements that change oxidation state:
SiO₂ + 2 Y → Si + Y³⁺
Balance oxygen by adding water to the side that needs it:
SiO₂+ 2 Y + 2H₂O → Si + Y³⁺
Balance hydrogen by adding hydroxide ions to the opposite side:
SiO₂ + 2Y + 2H₂O → Si + Y³⁺ + 4OH⁻
Balance the charge by adding electrons to one side:
SiO₂ + 2Y + 2H₂O + 4e- → Si + Y³⁺ + 4OH⁻
Therefore, the balanced equation for the oxidation-reduction reaction in basic solution is:
SiO₂ + 2Y + 2H₂O + 4e- → Si + Y³⁺ + 4OH⁻
Learn more about redox equations at: https://brainly.com/question/21851295
#SPJ4
Reactions between 1,6-diaminohexane, H,N(CH)NH2, and different dicarboxylic acids, HOOC(CH),COOH, are used to prepare polymers that have a structure similar to that of nylon. How many carbon atoms (n) were in the dicarboxylic acids used to prepare the polymers with the repeating units shown in Figure P12.84?
The dicarboxylic acids used to prepare the polymers with the repeating units shown in Figure P12.84 had 6 carbon atoms.
The repeating unit shown in Figure P12.84 is a nylon polymer, which has a structure similar to that of the polymers formed by reacting 1,6-diaminohexane with dicarboxylic acids. The repeating unit of nylon is composed of two monomers, one containing a 6-carbon amine group (1,6-diaminohexane) and the other containing a 6-carbon acid group (a dicarboxylic acid). Since the repeating unit shown in Figure P12.84 contains 12 carbon atoms in total (6 from the amine group and 6 from the acid group), we can infer that the dicarboxylic acid used in the polymerization reaction must contain 6 carbon atoms. This is because the amine group is fixed at 6 carbons and the acid group needs to be of equal length to create a repeating unit with a fixed length of 12 carbon atoms.
In the given polymer, 1,6-diaminohexane contributes 6 carbon atoms to the repeating unit. The dicarboxylic acid will contribute the remaining carbon atoms in the repeating unit.
1. Identify the number of carbon atoms in the 1,6-diaminohexane portion of the repeating unit (6 carbon atoms).
2. Examine the structure of the repeating unit in Figure P12.84 and count the total number of carbon atoms in the unit.
3. Subtract the number of carbon atoms contributed by the 1,6-diaminohexane (6) from the total number of carbon atoms in the repeating unit.
4. The resulting number is the number of carbon atoms (n) in the dicarboxylic acid used to prepare the polymer.
To know more about acids visit:
https://brainly.com/question/14072179
#SPJ11
A solution of 0.321 M KOH is used to titrate 15.0 mL of a 0.181 M H3PO4 solution. What volume, in milliliters, of the KOH solution is required? H3PO4(aq)+3KOH(aq)→3H2O(l)+K3PO4(aq)
25.4 mL of the 0.321 M KOH solution is required to titrate 15.0 mL of the 0.181 M [tex]H_3PO_4[/tex] solution.
In this reaction, one mole of [tex]H_3PO_4[/tex]reacts with three moles of KOH. Therefore, the balanced equation for the reaction can be written as:
[tex]H_3PO_4(aq) + 3KOH(aq) = 3H_2O(l) + K_3PO_4(aq)[/tex]
The number of moles of [tex]H_3PO_4[/tex] present in the solution can be calculated as follows:
moles of [tex]H_3PO_4[/tex]= Molarity x Volume = 0.181 M x 0.0150 L = 0.002715 moles
Since three moles of KOH react with one mole of H3PO4, the number of moles of KOH required can be calculated as:
moles of KOH = 3 x moles of [tex]H_3PO_4[/tex]= 3 x 0.002715 moles = 0.008145 moles
The concentration of the KOH solution is 0.321 M. The volume of the KOH solution required can be calculated using the following formula:
Volume of KOH solution = moles of KOH / Molarity of KOH
Volume of KOH solution = 0.008145 moles / 0.321 M = 0.0254 L = 25.4 mL (rounded to 3 significant figures)
For more question on titrate click on
https://brainly.com/question/13031875
#SPJ11
The volume of 0.321 M KOH solution required to titrate 15.0 mL of 0.181 M H3PO4 solution is 25.5 mL.
In order to calculate the volume of KOH solution required to titrate the given amount of H3PO4 solution, we need to use the balanced chemical equation and the stoichiometry of the reaction.
The balanced chemical equation shows that 3 moles of KOH are required to react with 1 mole of H3PO4. Therefore, the moles of KOH required can be calculated using the equation:
moles of H3PO4 = Molarity x Volume (in liters)
moles of KOH = 3 x moles of H3PO4
Once we have the moles of KOH required, we can use the molarity of the KOH solution to calculate the volume of KOH required:
moles of KOH = Molarity x Volume (in liters)
Volume of KOH = moles of KOH / Molarity
Substituting the values given in the problem, we get:
moles of H3PO4 = 0.181 x 0.0150 = 0.00272
moles of KOH = 3 x 0.00272 = 0.00816
Volume of KOH = 0.00816 / 0.321 = 0.0255 L = 25.5 mL
Therefore, 25.5 mL of 0.321 M KOH solution is required to titrate 15.0 mL of 0.181 M H3PO4 solution.
Learn more about solution here :
https://brainly.com/question/1616939
#SPJ11
2h2o(l)→2h2(g) o2(g) what mass of h2o is required to form 1.2 l of o2 at a temperature of 300 k and a pressure of 0.951 atm ?
We can use the ideal gas law and stoichiometry to determine the amount of H₂O needed to produce 1.2 L of O₂ gas at 300 K and 0.951 atm. The calculated mass of H₂O needed is around 5.74 g.
The balanced equation for the reaction is:
2H₂O(l) → 2H₂(g) + O₂(g)
From the balanced equation, we can see that for every 2 moles of water, 1 mole of oxygen gas is produced. Using the ideal gas law, we can relate the number of moles of a gas to its volume, temperature, and pressure:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
We can rearrange this equation to solve for n:
n = PV/RT
We have the values for P, V, and T, so we can calculate the number of moles of oxygen gas:
n(O₂) = (0.951 atm)(1.2 L)/(0.0821 L·atm/mol·K)(300 K) = 0.0474 mol
According to the balanced equation, 1 mole of oxygen gas is produced from 2 moles of water, so we need half as many moles of water:
n(H₂O) = 0.5 × n(O₂) = 0.5 × 0.0474 mol = 0.0237 mol
Finally, we can convert the number of moles of water to its mass using the molar mass of water:
m(H₂O) = n(H₂O) × M(H₂O) = 0.0237 mol × 18.015 g/mol = 0.427 g
Therefore, we need 0.427 g of water to form 1.2 L of oxygen gas at a temperature of 300 K and a pressure of 0.951 atm.
To know more about the ideal gas law refer here :
https://brainly.com/question/28257995#
#SPJ11
2.write a balanced equation from each line notation: a. (2 pts) ag(s) | ag (aq) || cd2 (aq) | cd(s)b. (2 pts) pb(s) | pb (aq) || MnO2 (aq) | Mn2(aq) I Pt (s)
The balanced equation for (a) is Cd(s) + 2Ag+(aq) → Cd2+(aq) + 2Ag(s) (b) is Pb(s) + MnO2(aq) + 4H+(aq) → Pb2+(aq) + Mn2+(aq) + 2H2O(l) and (c) is incomplete notation.
a. The given line notation represents a redox reaction involving the oxidation of cadmium (Cd) and the reduction of silver (Ag). The balanced equation can be written as:
Cd(s) + 2Ag+(aq) → Cd2+(aq) + 2Ag(s)
b. The given line notation represents a redox reaction involving the oxidation of lead (Pb) and the reduction of manganese dioxide (MnO2). The balanced equation can be written as:
Pb(s) + MnO2(aq) + 4H+(aq) → Pb2+(aq) + Mn2+(aq) + 2H2O(l)
c. The given line notation is incomplete as it only shows a single electrode. A complete redox reaction requires two half-reactions, one for the oxidation reaction and one for the reduction reaction. Therefore, a balanced equation cannot be written for this line notation.
For more such questions on balanced equation:
https://brainly.com/question/7181548
#SPJ11
if a substance has a half-life of 3.70 days, and there are initially 50.0 g of the substance, how many grams will remain after precisely three weeks?
After precisely three weeks, approximately 3.91 grams of the substance will remain.
What is the mass of the substance(Half life) after three weeks?The half-life of a substance is the time it takes for half of the initial amount to decay or transform into another substance. In this case, if the half-life is 3.70 days, it means that after 3.70 days, half of the substance will remain, and after another 3.70 days, half of that remaining amount will remain, and so on.
To find out how many grams will remain after precisely three weeks, we need to convert the time to the same unit as the half-life. There are 7 days in a week, so three weeks would be equal to 3 × 7 = 21 days. Now, we can calculate the number of half-lives that have occurred within this time frame by dividing 21 days by 3.70 days.
21 days ÷ 3.70 days = 5.68 half-lives
Since each half-life reduces the amount by half, we can calculate the remaining amount by raising 0.5 to the power of the number of half-lives:
Remaining amount = Initial amount × (0.5)^(number of half-lives)
Remaining amount = 50.0 g × (0.5)^(5.68)
Remaining amount ≈ 3.91 g
Therefore, after precisely three weeks, approximately 3.91 grams of the substance will remain.
Learn more about half-life .
brainly.com/question/31666695
#SPJ11
was there a difference in the melting point of the crude and the melting point of the recrystallized product?
Yes, there is a difference between the melting point of the crude product and the recrystallized product. This is because recrystallization is a process of purification, where impurities are removed.
What is recrystallization?Recrystallization is a process by which molecules of a chemical substance are reorganized into a more ordered, defined crystal structure. The process involves dissolving the compound in an appropriate solvent and then allowing it to slowly crystallize back out as it cools. The solvent can be chosen specifically to enhance the desired crystal structure.
The melting point of a substance is affected by the presence of impurities. Impurities disrupt the packing arrangement of the molecules, which lowers the melting point. When the impurities are removed, the packing arrangement of the molecules is no longer disrupted, resulting in a higher melting point. Therefore, the melting point of the crude product is lower than the melting point of the recrystallized product due to the removal of impurities during the recrystallization process.
To learn more about recrystallization
https://brainly.com/question/10194206
#SPJ4
The thermal efficiency for a heat engine operating between a source and a sink at 377°C and 27°C, respectively, is most nearly equal to: Multiple Choice X 54% O 93% 46% 73% O Cannot be determined with the given information.
The thermal efficiency as a percentage is approximately 53.82%.
To calculate the thermal efficiency for a heat engine operating between a source and a sink, you can use the formula:
Thermal efficiency = 1 - (T_cold / T_hot)
First, convert the temperatures to Kelvin:
T_hot = 377°C + 273.15 = 650.15 K
T_cold = 27°C + 273.15 = 300.15 K
Now, substitute the values into the formula:
Thermal efficiency = 1 - (300.15 / 650.15) = 1 - 0.4618 ≈ 0.5382
As a percentage, the thermal efficiency is approximately 53.82%. Among the given options, the closest choice is 54%.
More on thermal efficiency: https://brainly.com/question/11900895
#SPJ11
Which response is false? An acid-base indicator ____.
a. might be an acid
b. might have only one highly colored form
c. might be a base
d. might have two highly colored forms
e. can be non-polar
The false statement among the options is An acid-base indicator can be non-polar. Option e is correct answer.
An acid-base indicator is a substance that undergoes a color change in the presence of an acid or a base. It is typically a weak acid or a weak base that can exist in different forms, each having a different color. When an indicator is in its acidic form, it may be represented as an acid (option a) and have a specific color. Similarly, when it is in its basic form, it can be considered as a base (option c) and exhibit a different color. Therefore, options a and c are true statements.
Furthermore, an indicator can have one highly colored form (option b) or two highly colored forms (option d), depending on its acid-base equilibrium and the pH of the solution. For example, litmus is a commonly used indicator that exists in two forms: red in acidic solutions and blue in basic solutions.
However, the statement in option e, that an acid-base indicator can be non-polar, is false. Acid-base indicators are typically polar compounds because they contain functional groups that are involved in acid-base reactions. The polar nature of the indicator molecules allows them to interact with polar solvents and participate in the necessary chemical reactions for color changes.
Learn more about acid-base indicator here
https://brainly.com/question/13004359
#SPJ11
Consider a galvanic cell that uses the reaction
Cu(s)+2Fe3+(aq)→Cu2+(aq)+2Fe2+(aq)
A galvanic cell that uses the reaction Cu(s) + 2Fe3+(aq) → Cu2+(aq) + 2Fe2+(aq) consists of two half-cells: one with a copper electrode in a Cu2+ solution, and another with an iron electrode in a Fe3+ solution. The overall cell potential is positive, indicating a spontaneous redox reaction.
In this galvanic cell, copper acts as the reducing agent, losing electrons to become Cu2+(aq) while iron acts as the oxidizing agent, gaining electrons to become Fe2+(aq). The copper electrode, which undergoes oxidation, is the anode, while the iron electrode, which undergoes reduction, is the cathode. The anode and cathode are connected by a wire, allowing the flow of electrons from the anode to the cathode. Additionally, a salt bridge or porous disk is present to maintain electrical neutrality by allowing the transfer of ions between the two half-cells.
As the reaction proceeds, the copper electrode will decrease in mass as it loses Cu(s) to the solution, and the iron electrode will increase in mass as Fe3+ ions are reduced to Fe2+. The cell potential can be calculated using the standard electrode potentials of the two half-reactions and the Nernst equation, which considers the concentrations of the reacting species. This galvanic cell demonstrates a real-life application of redox reactions and their ability to generate electricity through spontaneous chemical reactions.
Know more about Galvanic Cell here:
https://brainly.com/question/13031093
#SPJ11
What is the molar mass of an unknown gas with a density of 5.35 g/l at 2.00 atm and 55.0 °c?
The molar mass of the unknown gas with a density of 5.35 g/l at 2.00 atm and 55.0 °c is 12.5 g/mol.
To calculate the molar mass of the unknown gas, we can use the Ideal Gas Law, which relates the pressure, volume, temperature, and number of moles of a gas: PV = nRT
where: P = pressure (in atm) V = volume (in liters) n = number of moles R = gas constant (0.0821 L·atm/(mol·K)) T = temperature (in Kelvin)
We can rearrange the Ideal Gas Law to solve for the number of moles: n = (PV) / (RT) We can then use the density of the gas to relate the number of moles to the mass of the gas: density = mass / volume mass = density x volume
Substituting this expression for mass into the Ideal Gas Law equation, we get: n = (P / RT) x (density x volume)
Finally, we can use the molar mass formula to solve for the molar mass: molar mass = mass / number of moles
Substituting all the given values and solving for the molar mass, we get: n = (2.00 atm / (0.0821 L·atm/(mol·K) x (55.0 °C + 273.15 K))) x (5.35 g/L x 1 L) = 0.427 mol
mass = density x volume = 5.35 g/L x 1 L = 5.35 g
molar mass = mass / number of moles = 5.35 g / 0.427 mol = 12.5 g/mol
Therefore, the molar mass of the unknown gas is 12.5 g/mol.
Know more about Ideal Gas Law here
https://brainly.com/question/28257995#
#SPJ11
A domestic wastewater has a reaction rate coefficient of 0.3 1/d at 20° C. The ultimate BOD of the sample is 240 mg/L. What is the BOD remained after incubation at 20° C for 5 days?
A domestic wastewater has a reaction rate coefficient of 0.3 1/d at 20° C. The ultimate BOD of the sample is 240 mg/L. The BOD remained after incubation at 20° C for 5 days is 96 mg/L (rounded off to two decimal places).
The reaction rate coefficient (k) of the domestic wastewater is given as 0.3 1/d at 20° C. The ultimate BOD of the sample is given as 240 mg/L, which means that the maximum amount of oxygen that can be consumed by the sample has been determined.
To find the remaining BOD after incubation, we can use the following formula:
BOD_remaining = BOD_ultimate * e^(-k * t)
Where: BOD_remaining is the BOD after incubation, BOD_ultimate is the ultimate BOD of the sample (240 mg/L), k is the reaction rate coefficient (0.3 1/d), t is the incubation time (5 days), and e is the base of the natural logarithm (approximately 2.71828).
1. Plug the values into the formula: BOD_remaining = 240 * e^(-0.3 * 5)
2. Calculate the exponent: -0.3 * 5 = -1.5
3. Find the value of e raised to the power of -1.5: e^(-1.5) ≈ 0.22313
4. Multiply the ultimate BOD by the calculated value: 240 * 0.22313 ≈ 103.68.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ11
The alcohol in "gasohol" burns according to the following equation: C2H6O + 3 O2 → 2 CO2 + 3H2O. In a test, 60. 89 moles of water is collected from this reaction. How many moles of CO2 also formed?
Therefore, approximately 40.59 moles of CO2 were also formed in the given test where 60.89 moles of water were collected from the reaction of the alcohol in "gasohol."
According to the balanced equation, the stoichiometry shows that for every 1 mole of C2H6O, 2 moles of CO2 are formed. Therefore, we can use this ratio to determine the moles of CO2 formed when 60.89 moles of water are collected.
Since 3 moles of water are produced for every 2 moles of CO2, we can set up a proportion using the collected moles of water and the corresponding moles of CO2:
3 moles H2O / 2 moles CO2 = 60.89 moles H2O / x moles CO2
Solving for x, we find:
x = (2 moles CO2 * 60.89 moles H2O) / 3 moles H2O
x ≈ 40.59 moles CO2
Therefore, approximately 40.59 moles of CO2 were also formed in the given test where 60.89 moles of water were collected from the reaction of the alcohol in "gasohol."
To learn more about stoichiometry click here, brainly.com/question/28780091
#SPJ11
Calculate the amount of heat required to melt 3333 g of ice (solid H2O). The enthalpy of fusion of water is ΔHfus=6.010 kJ/mol.Please choose the correct answer from the following choices, and then select the submit answer button.Answer choicesa) 3.610×105 kJ. b) 2.003×104 kJ. c) 1112 kJ. d) 30.78 kJ
The amount of heat would be 1112 kJ. Therefore, the correct answer is c) 1112 kJ.
To calculate the amount of heat required to melt the given amount of ice, we can use the following formula:
q = m * ΔHfus
where q is the amount of heat required, m is the mass of ice, and ΔHfus is the enthalpy of fusion of water.
First, we need to convert the mass of ice from grams to moles, using the molar mass of water:
1 mole of water (H2O) = 18.015 g
3333 g of ice = 3333/18.015 = 185.05 moles of ice
Now, we can use the formula to calculate the amount of heat required:
q = 185.05 mol * 6.010 kJ/mol
q = 1112 kJ
Thus the right option is c) 1112 kJ.
Learn more about the enthalpy: https://brainly.com/question/16720480
#SPJ11