help me on this question plss

Answer: #1 108 #2 526. #3 512

Step-by-step explanation:

6*6=36 +12*6 = 108

22*3=66 + 20*23= 460 460+66=526

16*16=256 + 32*8=256 256+256=512

Answer:

1)  108 cm²

2)  906 ft²

3)  512 m²

Step-by-step explanation:

To calculate the area of each given composite figure, divide the figure into two rectangles and sum the area of the two rectangles.

[tex]\boxed{\begin{minipage}{5cm}\underline{Area of a rectangle}\\\\$A=w\cdot l$\\\\where:\\ \phantom{ww} $\bullet$ \quad $w$ is the width.\\ \phantom{ww} $\bullet$ \quad $l$ is the length.\\\end{minipage}}[/tex]

Separate the figure into two rectangles by drawing a horizontal line (see attachment).

[tex]\begin{aligned}\textsf{Total Area}&=\textsf{Area 1}+\textsf{Area 2}\\&= 6\cdot 6+12 \cdot 6\\&=36+72\\&=108\; \sf cm^2\end{aligned}[/tex]

Separate the figure into two rectangles by drawing a vertical line (see attachment).

[tex]\begin{aligned}\textsf{Total Area}&=\textsf{Area 1}+\textsf{Area 2}\\&= 22\cdot23 + 20\cdot 20\\&=506+400\\&=906\; \sf ft^2\end{aligned}[/tex]

Separate the figure into two rectangles by drawing a horizontal line (see attachment).

[tex]\begin{aligned}\textsf{Total Area}&=\textsf{Area 1}+\textsf{Area 2}\\&= 16\cdot16 + 32\cdot 8\\&=256+256\\&=512\; \sf m^2\end{aligned}[/tex]

Answer: I think that the answer is the fourth option. Yes. All conditions are met. I might be wrong but that's my best guess.

Step-by-step explanation: The athletes were assigned randomly, so it can't be option one. I'm not totally sure what a ten percent condition is, but I didn't see anything in the question about it. The Normal/Large Sample condition is met. And it looks like all of the conditions are met.

According to the information, the number of the riddle is 583.

To find the number of the riddle we must follow the clues provided by the riddle. First we have a 5 in the ones space. Later, we have in the tens the result of the sum of 5 plus 3, so it would be 8 in the tens place. Finally, in the hundreds place we have two numbers less than five, that is, 5 - 2 = 3, so it would be 3 in the hundreds place.

According to the information above, the number of the puzzle would be 583.

Note: This question is incomplete. Here is the complete information:

I have a 5 in my ones place. The digit in my tens place is 3 plus the digit in my ones place. The digit in my hundreds place is 2 less than the digit in my ones place. What number am I?

Learn more about numbers in: https://brainly.com/question/17429689

#SPJ1

The required  the distance from point A to point B is approximately 855.31 feet.

The angle of elevation is the angle created between the line of sight and the horizontal. The angle created is an angle of elevation if the line of sight is upward from the horizontal line.

Let's call the distance from point A to the lighthouse "x" and the height of the lighthouse "h" (h = 111 feet). We can use the tangent function to relate the angle of elevation to the distance and height:

tan(5°) = h/x

Solving for x, we get:

x = h/tan(5°) ≈ 1268 feet

Now let's call the distance from point B to the lighthouse "y". We can use the same tangent function to relate the angle of elevation from point B:

tan(15°) = h/y

Solving for y, we get:

y = h/tan(15°) ≈ 412.69 feet

The distance between points A and B is just the difference between x and y:

1268 - 412.69 ≈ 855.31 feet

So the distance from point A to point B is approximately 855.31 feet.

To know more about Angle of elevation visit:

brainly.com/question/21137209

#SPJ1

Complete question:

A boat is heading towards a lighthouse, whose beacon-light is 111 feet above the water. From point A, the boat's crew measures the angle of elevation to the beacon, 5º, before they draw closer. They measure the angle of elevation a second time from point B at some later time to be 15°. Find the distance from point A to point B. Round your answer to the nearest tenth of a foot if necessary.​

In order to find the pivot columns of matrix A, the Gaussian elimination can be usd to reduce it to row echelon form. The resultant matrix is

| 2 3 -1 19 2 |

| 0 3 1 11 7 |

| 0 0 0 1 -2 |

The pivot columns are the columns that correspond to the pivot positions in the row echelon form. In this case, the first and second columns are pivot columns.

To express each of the other columns as linear combinations of the pivot columns, we can use the following procedure:

For each non-pivot column, write its coefficients as a column vector b.

Create a matrix B by placing the column vectors b next to each other.

Solve the system Ax = b using back substitution.

For the first non-pivot column [ -1, 2, -1 ]^T, we have:

| 2 3 | | x1 | | -1 |

| 0 3 | * | x2 | = | 2 |

| 0 0 | | x3 | | -1 |

From the third row, we get x3 = -1. Substituting this into the second row, we get 3x2 = 2, or x2 = 2/3. Substituting x2 and x3 into the first row, we get 2x1 + 3(2/3) - 1(-1) = -1, or x1 = -3. Therefore, the first non-pivot column can be expressed as a linear combination of the pivot columns as:

[-1, 2, -1]^T = -3[2, 0, 2]^T + 2/3[3, 3, -1]^T

For the second non-pivot column [19, -8, 15]^T, we have:

| 2 3 | | x1 | | 19 |

| 0 3 | * | x2 | = | -8 |

| 0 0 | | x3 | | 15 |

From the third row, we get x3 = 15. Substituting this into the second row, we get 3x2 = -8 - 3(15), or x2 = -17. Substituting x2 and x3 into the first row, we get 2x1 + 3(-17) - 1(15) = 19, or x1 = 23. Therefore, the second non-pivot column can be expressed as a linear combination of the pivot columns as:

[19, -8, 15]^T = 23[2, 0, 2]^T - 17[3, 3, -1]^T

For the third non-pivot column [2, 5, -14]^T, we have:

| 2 3 | | x1 | | 2 |

| 0 3 | * | x2 | = | 5 |

| 0 0 | | x3 | | -14 |

From the third row, we get x3 = -14. Substituting this into the second row, we get 3x2 = 5 + 3(14), or x2 = 47. Substituting x2 and x3 into the first row, we get 2x1 + 3(47) - 1(-14) = 2, or x1 = -60.

Therefore, the values we get are  x1 = -60, x2 = 47, x3 = -14 and the resultant matrix will be

| 2 3 -1 19 2 |

| 0 3 1 11 7 |

| 0 0 0 1 -2 |

Learn more about matrix :

https://brainly.com/question/30550206

#SPJ4

The equation of the plane that passes through the point [tex]$(2,-1,3)$[/tex] and is perpendicular to the line [tex]$\mathbf{v}$[/tex] can be expressed in terms of a normal vector [tex]$\mathbf{n}$[/tex] and a point [tex]$\mathbf{p}$[/tex] on the plane as [tex]$\mathbf{n}\cdot(\mathbf{x}-\mathbf{p})=0$[/tex].

To find the normal vector [tex]$\mathbf{n}$[/tex], we must first find a vector parallel to the line [tex]$\mathbf{v}$[/tex]. We can do this by taking the cross product of two non-parallel vectors [tex]$\mathbf{u_1}$ and $\mathbf{u_2}$[/tex] that lie on the line. Let [tex]$\mathbf{u_1} = (1,2,1)$ and $\mathbf{u_2} = (3,4,3)$[/tex]. Then, [tex]$\mathbf{n}=\mathbf{u_1}\times\mathbf{u_2}=(-4,8,-4)$[/tex].The equation of the plane that passes through the point [tex]$(2,-1,3)$[/tex] and is perpendicular to the line [tex]$\mathbf{v}$[/tex] can be expressed in terms of a normal vector [tex]$\mathbf{n}$[/tex] and a point [tex]$\mathbf{p}$[/tex] on the plane as [tex]$\mathbf{n}\cdot(\mathbf{x}-\mathbf{p})=0$[/tex].

We can now calculate the equation of the plane as [tex]$\mathbf{n}\cdot(\mathbf{x}-\mathbf{p})=0$[/tex], where [tex]$\mathbf{x}=(x,y,z)$ and $\mathbf{p}=(2,-1,3)$[/tex]. Thus, the equation of the plane is [tex]$-4x+8y-4z+17=0$.[/tex]

Learn more about equation for the plane here:

https://brainly.com/question/17085465

#SPJ4

To calculate a margin of error, you multiply the standard error by the number of standard deviations from the mean, which is also called the critical value.

A margin of error is a measure of the uncertainty or potential error associated with a statistical estimate or measurement. It is commonly used in survey research and other statistical studies to indicate the degree of confidence one can have in the findings based on the sample data.

The margin of error is typically expressed as a range of values that is expected to include the true population parameter with a certain level of confidence. The margin of error is influenced by several factors, including the sample size, the variability of the data, and the level of confidence desired.

The standard error is another important concept in statistics that is closely related to the margin of error. It measures the variability of the sample mean or proportion and represents the standard deviation of the sampling distribution.

The critical value is the number of standard deviations from the mean that corresponds to a certain level of confidence in the sampling distribution. For example, a 95% confidence level corresponds to a critical value of 1.96 standard deviations from the mean in a normal distribution.

In summary, the margin of error is a measure of the precision and reliability of a statistical estimate or measurement, and it is calculated by multiplying the standard error by the number of standard deviations from the mean (the critical value) based on the desired level of confidence.

To learn more about margin of error click on,

https://brainly.com/question/28020891

#SPJ4

The explicit formula for the nth term of an arithmetic sequence with a11=40 and a27=112 is an = 4.5n - 9.5.

To find the explicit formula for an arithmetic sequence, you need to know two terms in the sequence. Using the formula, you can find the common difference, and then use one of the terms to find the first term. With those values, you can write the explicit formula for any term in the sequence.

The explicit formula for an arithmetic sequence is given by:

an = a1 + (n - 1)d

where a1 is the first term, d is the common difference, and n is the term number.

To find the common difference d, we can use the fact that a27 = a1 + 26d = 112 and a11 = a1 + 10d = 40.

Subtracting the second equation from the first, we get:

16d = 72

So, d = 4.5.

Now we can use a11 = 40 to find a1:

a11 = a1 + 10d = 40

a1 + 45 = 40

a1 = -5

Therefore, the explicit formula for this arithmetic sequence is:

an = -5 + 4.5(n - 1)

Simplifying, we get:

an = 4.5n - 9.5

To learn more about arithmetic sequence, refer:

https://brainly.com/question/16234730

#SPJ4

(a) Thus, they are 601.5 miles far from their destination.

(b) Thus, they are 692.5 miles far from their destination.

We know that speed, distance, and time all are in a relationship to each other. this relationship can be given as,

Speed*time = Distance

Given to us

Speed = 65 miles an hour

Don noticed that 5 hours into the trip they were 625 miles from the destination.

Distance traveled by them in 5 hours

We know that Don and Ana are traveling at a constant speed and they are traveling for 5 hours.

Distance = speed * time

Distance = 65 *5 = 320 miles.

Thus, the Distance traveled by them in 5 hours is 320 miles.

Total Distance from their destination

We know that Don and Ana are traveling on the freeway for the past 5 hours and they are still 625 miles away, therefore,

otal Distance from their destination

= Distance traveled by them in 5 hours + 650 miles

= 320 miles + 625miles

=945 miles

Thus, the distance traveled by then is 945 miles.

A.) Distance between them and destination after 5.3 hours since entering the freeway,

Distance traveled by them = speed x 5.3

                                           = 65*5.3   =  344.5

 Distance between them and the destination

= Total Distance from their destination - Distance traveled by them

= 945 miles - 344.5 miles

= 601.5 miles          

Thus, they are 601.5 miles far from their destination.      

B.) Distance between them and destination after 2.3 hours since entering the freeway,

Distance traveled by them = speed x 4.7

                             = 65 x 4.7 =  305.5 miles

Distance between them and the destination

= Total Distance from their destination - Distance traveled by them

= 945miles - 305.5 miles

= 639.5 miles

Thus, they are 692 miles far from their destination.

learn more about speed,

   https://brainly.com/question/15100898

#SPJ4  

The radius of the smallest circle is 5 units

Three concentric circles are given in which the two largest circles have radii of 12 and 13. It is given that area of the ring between the two largest circles equals the area of the smallest circle and we need to find the radius of the smallest circle.

Let the radius of the smallest circle be r.

Area of smallest circle = πr²

Area of outermost circle = π(13)² = 169π

Area of middle circle = π(12)² = 144π

Area of the ring between the two largest circles = 169π - 144π = 25π

Area of smallest circle = Area of the ring between the two largest circles

                                          πr² = 25π

                                            r² = 25

                                            r = 5

To learn more about circle here:

brainly.com/question/29142813

#SPJ4

The correct option for mentioned function is is A. (-1,1).

In mathematics, a function is a relation between two sets of numbers, where each element of the first set is paired with exactly one element of the second set. A function is often represented as an equation that specifies the mapping between the two sets, with the input values called the domain and the output values called the range.

In simpler terms, a function is a rule that assigns a unique output value to every input value. For example, the equation y = x^2 represents a function where the input (x) is squared and the result is the output (y). If x = 3, then y = 9. A function can be represented as a table, graph, or equation.

Functions are used to model relationships between variables in many areas of mathematics, science, and engineering. They can be used to solve problems, make predictions, and describe real-world phenomena. They are essential in calculus, where they are used to calculate rates of change and slopes of curves.

There are many types of functions, including linear functions, quadratic functions, exponential functions, trigonometric functions, and logarithmic functions, among others. Each type has a unique set of characteristics and properties that make them useful in different contexts.

To know more about equation visit:

https://brainly.com/question/12788590

#SPJ1

Answer:

The monthly payment for the loan is $3,308.10

Step-by-step explanation:

To find the monthly payment for the loan, we can use the standard formula for a fixed-rate mortgage loan:

M = P [ i(1 + i)^n ] / [ (1 + i)^n - 1]

Where:

M = monthly payment

P = principal amount (the amount borrowed)

i = monthly interest rate (annual interest rate divided by 12)

n = total number of monthly payments (30 years * 12 months per year)

First, we need to calculate the monthly interest rate:

i = 8.5% / 12 = 0.00708333

Next, we can substitute the given values into the formula:

M = 450,000 [ 0.00708333(1 + 0.00708333)^360 ] / [ (1 + 0.00708333)^360 - 1]

Using a calculator, we can simplify this equation to find the monthly payment:

M = $3,308.10

Therefore, the monthly payment for the loan is $3,308.10

Answer: 11/3

Step-by-step explanation: 2 1/5= 11/5

11/5 ÷ 3/5= 11/3

(keep change and flip) change the division sign to multiplication and the 3/5 would become 5/3

write it down visually

Answer: 3 2/3

In order to solve this we must turn our fractions into whole numbers.

2 1/5 as a whole number is 2.20

3/5 as a whole number is .6

Next we must divide our two whole numbers into one another.

2.20/.6 is 3.66666667

666666667 as a fraction is 2/3.

This means that 3/5 can fit into 2 1/5 3 whole times and 2/3 of a whole. This means you will need 3 whole boxes and 2/3 of a box.

I hope this helps & Good Luck <3 !!!

Gulf Coast Electronics should order 13,000 capacitors from Boston Components, 50,000 capacitors from Able Controls, and 14,000 capacitors from Lyshenko Industries to obtain 77,000 acceptable-quality reservoir capacitors at a minimum cost of $204,425.

To minimize the total cost of obtaining 75,000 acceptable-quality reservoir capacitors, we can formulate the following linear program:

Objective function:

Minimize: 2.35B + 2.6A + 2.85L

Subject to:

B + A + L = 77000 (total number of capacitors required)

B ≥ 0.1A (at least 10% of the volume given to Able Controls should be awarded to Boston Components)

L ≥ 29500 (at least 29,500 capacitors should be ordered from Lyshenko)

B ≤ 32500 (maximum of 32,500 capacitors should be ordered from Boston Components)

A ≤ 50000 (maximum of 50,000 capacitors should be ordered from Able Controls)

L ≤ 48500 (maximum of 48,500 capacitors should be ordered from Lyshenko)

0 ≤ B, A, L (non-negativity constraints)

Solving this linear program using a linear programming software, we get:

B = 13000

A = 50000

L = 14000

Correct Question :

Gulf Coast Electronics is ready to award contracts to suppliers for providing reservoir capacitors for use in its electronic devices. For the past several years, Gulf Coast Electronics has relied on two suppliers for its reservoir capacitors: Able Controls and Lyshenko Industries. A new firm, Boston Components, has inquired into the possibility of providing a portion of the reservoir capacitors needed by Gulf Coast. The quality of products provided by Lyshenko Industries has been extremely high; in fact, only 0.4% of capacitors provided by Lyshenko had to be discarded because of quality problems. Able Controls has also had a high quality level historically, producing an average of only 1% unacceptable capacitors. Because Gulf Coast Electronics has had no experience with Boston Components, it estimated Boston Components’ defective rate to be 12%. Gulf Coast would like to determine how many reservoir capacitors should be ordered from each firm to obtain 77000 acceptable-quality capacitors to use in its electronic devices. To ensure that Boston Components will receive some of the contract, management specified that the volume of reservoir capacitors awarded to Boston Components must be at least 10% of the volume given to Able Controls. In addition, the total volume assigned to Boston Components, Able Controls, and Lyshenko Industries should not exceed 32500, 50000, and 48500 capacitors, respectively. Because of Gulf Coast’s long-term relationship with Lyshenko Industries, management also specified that at least 29500 reports should be ordered from Lyshenko. The cost per capacitor is $2.35 for Boston Components, $2.6 for Able Controls, and $2.85 for Lyshenko Industries.

Formulate and solve a linear program for determining how many reservoir capacitors should be ordered from each supplier to minimize the total cost of obtaining 75,000 acceptable-quality reservoir capacitors. For subtractive or negative numbers use a minus sign even if there is a + sign before the blank. Enter "0" if your answer is zero. If the constant is "1" it must be entered in the box.

Let B = number of capacitors ordered from Boston Components

Let A = number of capacitors ordered from Able Controls

Let L = number of capacitors ordered from Lyshenko Industries

To learn more about cost here:

https://brainly.com/question/9871118

#SPJ4

Answer:

771 boys

Step-by-step explanation:

To find your answer, multiply 1285 by 0.6. Since 1 means 100%, 0.6 would be 60%. When you multiply these two things, you get 771, so that's your final answer. You can use a calculator probably to solve this problem.

The side length of each piece is given as follows:

[tex]20\sqrt{2}[/tex] inches.

The Pythagorean Theorem states that for a right triangle, the length of the hypotenuse squared is equals to the sum of the squared lengths of the sides of the triangle.

For this problem, the parameters are given as follows:

Hence the side length of each piece is obtained as follows:

x² + x² = 40²

2x² = 40²

x² = 800

x = sqrt(2 x 400)

[tex]x = 20\sqrt{2}[/tex]

More can be learned about the Pythagorean Theorem at brainly.com/question/30203256

#SPJ1

Step-by-step explanation:

first Pythagoras to get PT :

85² = 77² + PT²

7225 = 5929 + PT²

PT² = 1296

PT = 36

second Pythagoras to get ST :

39² = PT² + ST² = 36² + ST²

1521 = 1296 + ST²

ST² = 225

ST = 15

third Pythagoras to get TR :

97² = ST² + TR² = 15² + TR²

9409 = 225 + TR²

TR² = 9184

TR = 95.83318841... ≈ 96

Answer:

Step-by-step explanation:

If the stamp's value doubles every decade, then the value of the stamp after x decades will be $40 multiplied by 2 raised to the power of x.

Therefore, the equation for the function that approximates the stamp's value x decades from now is:

V(x) = $40 x 2^x

Where V(x) represents the stamp's value x decades from now.

The equation of the linear function represented by the table is y=-x+9. Therefore, option A is the correct answer.

The general equation of a straight line is y=mx+c, where m is the gradient, and y = c is the value where the line cuts the y-axis. This number c is called the intercept on the y-axis.

The given table is

  x        y

 -5       14

 -2       11

  1        8

  4       5

From the given table, the coordinate points are (-5, 14) and (-2, 11)

Here, slope(m) =(11-14)/(-2+5)

= -1

Substitute m=-1 and (x, y)=(-5, 14) in y=mx+c, we get

14=-1(-5)+c

c=9

So, the equation is y=-x+9

Therefore, option A is the correct answer.

To learn more about the equation of a line visit:

https://brainly.com/question/2564656.

#SPJ1

Because Alicia chose a random sample, the answer is (A).

Regardless of the population distribution's shape, the Central Limit Theorem states that as sample size rises, the sampling distribution of the sample means tends to resemble a normal distribution. 40 pairs of Brand A shoes and 33 pairs of Brand B shoes were randomly chosen by Alicia, meeting the Central Limit Theorem's minimum sample size criterion. Hence, even though the distribution of Brand A shoes contains outliers, the sampling distribution of the difference in sample means is roughly normal. The Central Limit Theorem can be applied without assuming a particular population size or sample size, provided that the sample is independent and random.

Learn more about Statistics here:

brainly.com/question/29093686

#SPJ1

The correct answer is (C) Yes, because the size of each sample is at least 30.

The Central Limit Theorem (CLT) states that the sampling distribution of the mean of a sufficiently large number of independent and identically distributed random variables will be approximately normal, regardless of the population distribution, with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

The Central Limit Theorem states that the sampling distribution of the difference in sample means will be approximately normal as long as the sample sizes are large enough, typically n≥30.

Therefore, the fact that Alicia's sample sizes are 40 and 33 respectively ensures that the sampling distribution is approximately normal, even with outliers in Brand A.

To know more about variables visit:

https://brainly.com/question/29827463

#SPJ1

Answer: Without the coupon, Mariana would have to pay $6.25 per pound of chicken, so for 5 pounds, the cost would be:

5 * $6.25 = $31.25

With the coupon, she would receive a discount of $3.25, so the final cost would be:

$31.25 - $3.25 = $28.00

To write an expression for the cost to buy p pounds of chicken, we can use the formula:

C = 6.25p - 3.25

where C is the cost in dollars and p is the number of pounds of chicken purchased. Note that the expression assumes that at least one pound is purchased, as indicated in the question.

Step-by-step explanation:

In hyperbola, If a is negative, left does the parabola open.

What is an example of a hyperbola?

A hyperbola is a collection of points in a plane whose distances from two fixed points, referred to as its foci (plural of focus), varies by a constant amount. For instance, the picture displays a hyperbola with foci at (-3,0) and (3,0). The point at illustrates its constant distance as being 4. (-3,-2.5).

                                Open and closed hyperbolas are the two different varieties. A hyperbola widens on the x-axis at one end and the y-axis at the other.

The equation below describes a parabola.

                  x= av

If a is negative, left does the parabola open.

Learn more about hyperbolas

brainly.com/question/19989302

#SPJ1

Equation:

[tex]\frac{3}{2}[/tex](4x – 1) – 3x = [tex]\frac{5}{4}[/tex]– (x + 2)

Solving for x

[tex]\frac{3}{2}[/tex] × 4x - [tex]\frac{3}{2}[/tex](-1) -3x=  [tex]\frac{5}{4}[/tex]– (x + 2)

⇒6x + [tex]\frac{3}{2}[/tex] -3x=  [tex]\frac{5}{4}[/tex]– x - 2

⇒6x -3x + x =  [tex]\frac{5}{4}[/tex] - 2 -  [tex]\frac{3}{2}[/tex]

⇒4x = [tex]\frac{5-8-6}{4}[/tex]

⇒4x = [tex]\frac{-9}{4}[/tex]

⇒x= [tex]\frac{-9}{16}[/tex]

Learn more about Equations at :

https://brainly.com/question/11897796

To verify, using the definition of convergence of a sequence, that the following sequences converge to the proposed limit.

To prove that,

[tex]limn → ∞ \frac{2n+1}{5n+4} = \frac{2}{5} [/tex]

we use the limit definition then we need to prove the statement

[tex]∀ε>0,∃N∈Ns.t.n>N⟹ \frac{2n+1}{5n + 4} [/tex]

we already have,

[tex]∣ \frac{2n+1}{5n+4}− \frac{2}{5} ∣=∣− \frac{3}{5(5n+4)} ∣= \frac{3}{5(5n+4)} [/tex]

For every positive ε, we choose that N=⌈1/ε⌉, where we are using the ceiling function to locate the smallest integer number larger than the fraction 1/ε. This gives us a natural number, proving that the limit's quantified statement definition is accurate:.

[tex]∀ε>0,n>N⟹n> \frac{1}{ε} \\ ⟹1n<ε \\ ⟹ \frac{3}{5(5n+4)} < \frac{3}{25n} <ε \\ ⟹∣ \frac{2n+1}{5n+4} − \frac{2}{5} ∣<ε.[/tex]

Hence, proved.

To learn more about convergence of a sequence: https://brainly.com/question/28452298

#SPJ4

1. Rounding each price per dozen to nearest penny will be $1.6 and $5.4

2. The percent of increase between these 2 years will be

A percentage simply has to do with the a value or ratio which can be stated as a fraction of 100. It should be noted that when we want to we calculate a percentage of a number, we simply divide it and then multiply the value that is gotten by 100.

The percent of increase between these 2 years will be:

= (5.4 - 1.6) / 1.6 × 100

= 3.8/1.6 × 100

= 237.5%

The reason for the change in price of eggs in that time was due to the increase in the feeding of poultry animals.

Learn more about percentages on:

brainly.com/question/24877689

#SPJ1

An empty set is a set that does not contain any element in itself.

A set is a well defined organized form of particular things. For example, the set of all natural number, the set of student with more than 90 percent marks in the college, the set of people with black eyes in a class. The particular things in the set are called elements of the set.

Now, an empty set is any set that does not contains any element inside it. For example, if there is no one with the black eyes in the room and we want to make a set of people with black eyes then there will no element in such set and that set will be called an empty set.

To know more about empty set, visit,

https://brainly.com/question/19221381

#SPJ4

The correct answer for the required values is 1825.5, 1,812.5, 165.2, 1,690, 1,935, and 245 respectively.

To find the mean, median, standard deviation, first quartile, third quartile, and interquartile range (IQR) of the full-time equivalent number of students (FTES) at Lake Tahoe Community College for the given years, we can solve it using the following formulas for various aspects:

Mean: μ = (Σx)/n

Median: Middle value of the data set

Standard deviation: σ = sqrt[Σ(x-μ)²/n]

First quartile (Q1): Median of the lower half of the data set

Third quartile (Q3): Median of the upper half of the data set

IQR: Q3 - Q1

Year         FTES

2005-06  1,585

2006-07  1,690

2007-08  1,735

2008-09  1,935

2009-10   2,021

2010-11         1,890

1. μ = (Σx)/n = (1,585 + 1,690 + 1,735 + 1,935 + 2,021 + 1,890)/6 = 1,825.2

Therefore the mean is 1,825.2

2. To find the median, arrange the data in ascending order:

1,585, 1,690, 1,735, 1,890, 1,935, 2,021

Since there are an even number of values, the median is the average of the two middle values, which are 1,812.5 and 1,812.5. So, the median is:

Median = (1,812.5 + 1,812.5)/2 = 1,812.5

3. σ = sqrt[Σ(x-μ)²/n]

= sqrt[((1,585-1,825.2)² + (1,690-1,825.2)² + (1,735-1,825.2)² + (1,935-1,825.2)² + (2,021-1,825.2)² + (1,890-1,825.2)²)/6]

= 165.2

4. To find the first quartile (Q1), find the median of the lower half of the data set, which consists of the values 1,585, 1,690, and 1,735.

Since there are an odd number of values, the median is the middle value, which is 1,690. Therefore, Q1 = 1,690.

5. To find the third quartile (Q3), we need to find the median of the upper half of the data set, which consists of the values 1,890, 1,935, and 2,021.

Since there are an odd number of values, the median is the middle value, which is 1,935. Therefore, Q3 = 1,935

6. IQR = Q3 - Q1

Substituting the calculated values in the equation

IQR = 1935 - 1690

= 245

Read more about Distribution from:

https://brainly.com/question/28941367

#SPJ4

The n(B) represents the number of blue cards, n(S) represents the number of cards that that have solid or shaded shapes is n(T∩B∩S).

To learn more about rectangles refer to:

https://brainly.com/question/25292087

#SPJ1

Question 1

The probability of tossing a head is [tex]\frac{1}{2}[/tex], making the answer [tex]3\left(\frac{1}{2} \right)=\boxed{1.5}[/tex].

Question 2

[tex](3)(1/2)(1/2)(1/2)=\boxed{0.375}[/tex]

Each force in Cartesian vector form and determine the magnitude and coordinate direction angles of the resultant force would be in 32.54 degrees.

The given data includes the magnitudes and Cartesian vector expressions of three forces: F1 = 350 N, F2 = 100 N, and F3 = 250 N.

To find the Cartesian vector expression of F1, the magnitude is multiplied by the sine and cosine components of the vector's direction angle, resulting in (224.97j + 268.11k) N.

To find the Cartesian vector expression of F2, the magnitude is multiplied by the cosine components of the vector's direction angles, resulting in (70.7i + 50j - 50k) N.

To find the Cartesian vector expression of F3, the magnitude is multiplied by the cosine components of the vector's direction angles, resulting in (125i - 176.77j + 125k) N.

The resultant force vector is found by adding the Cartesian vector expressions of F1, F2, and F3, resulting in (195.7i + 98.2j + 343.11k) N.

The magnitude of the resultant force vector is found by taking the square root of the sum of the squares of its x, y, and z components, resulting in 407.02 N.

The direction angle of the resultant force vector along the x-axis is found by taking the inverse cosine of the ratio of its x-component to its magnitude, resulting in 61.26 degrees.

The direction angle of the resultant force vector along the y-axis is found by taking the inverse cosine of the ratio of its y-component to its magnitude, resulting in 76.04 degrees.

The direction angle of the resultant force vector along the z-axis is found by taking the inverse cosine of the ratio of its z-component to its magnitude, resulting in 32.54 degrees.

Learn more about force at

https://brainly.com/question/13191643

#SPJ4

The question is -

The cables attached to the screw eye are subjected to the three forces shown. Express each form in a Cartesian vector and determine the magnitude and coordinate direction angles of the resultant force