Hey please answer this for me thanks.

Answer:

a system in chemical nomenclature and notation of indicating the oxidation state of the significant element in a compound or ion by means of a Roman numeral that is used in parentheses after the name or part of the name designating this element and ending invariably in -ate in the case of an anion and that is placed. Stock nomenclature for inorganic compounds is a widely used system of chemical nomenclature developed by the German chemist Alfred Stock and first published in 1919. In the "Stock system", the oxidation states of some or all of the elements in a compound are indicated in parentheses by Roman numerals.

Explanation:

Brainliest please?

1. LDFs

2. Intermolecular Forces

3. Intramolecular Forces

4. Linear

5. Tetrahedral

Edit: I'm new to this site and idk how to use it properly. I'm not sure about 2 and 3 currently because these forces are between molecules as well so INTERmolecular would be used twice (?)

Answer:

Nuclear Binding Energy (Bond Energy), Higher (Greater)

Explanation:

The energy required to overcome the attraction between two bonded nuclei and their shared electrons is called Nuclear Binding Energy (Bond Energy). This quantity is a measure of bond strength since the stronger the bond, the Higher (Greater) the amount of energy required to break it.

The energy required to overcome the attraction between two bonded nuclei and their shared electrons is called bond energy. This quantity is a measure of bond strength since the stronger the bond, the greater amount of energy required to break it.

I hope this helps!

1. d.4.125 x 10²⁴ atoms

2. c. 487.73 g

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

1. 7 moles of phosphorus, so n=7, then number of atoms :

[tex]\tt N=7\times 6.02\times 10^{23}\\\\N=4.215\times 10^{24}[/tex]

2. 2.5 moles of Pt, so n=2.5, the mass of Pt(MW=195,084 g/mol) :

[tex]\tt mass=mol\times MW\\\\mass=2.5\times 195,084\\\\mass=487.73~g[/tex]

Answer:

ΔH = -110.5kJ

Explanation:

It is possible to obtain enthalpy of combustion of a particular reaction by the algebraic sum of similar reactions (Hess's law). Using:

1. C(s) + O₂(g) → CO₂(g) ΔH₁ = -393.5kJ

2. CO(g) + 1/2O₂(g) → CO₂(g) ΔH₂ = -283.0kJ

The sum of 1 -2 gives:

C(s) + O₂(g) + CO₂(g) → CO₂(g) + CO(g) + 1/2O₂(g)

C(s) + 1/2O₂(g) → CO(g) ΔH = -393.5kJ - (-283.0kJ) =

Answer:

2

Explanation:

The subscript on Ammoniumwhich is (NH4) is 2.

Hope this helped!

Answer:

100 milliliter

Explanation:

Initial Pressure P1 = 60 kPa

Final Pressure P2 =   120 kPa

Initial Volume V1 = 200mL

Final Volume V2 = ?

These parameters are related by the following boyle's law which is mathematically given as;

V1P1 = V2P2

Making V2 subject of interest;

V2 = V1P1  / P2

inserting the values;

V2 = 200 * 60  /  120

V2 = 100ml

Answer:

A. Wave Height

Explanation:

Answer:

8. When using the scientific notation system to express large numbers, move the decimal until one digit(s) remain(s) to the left, then indicate the number of moves of the decimal point as the power of 10.

9. b. Significant figures.

When significant figures are used, the digits are certain plus one uncertain digit.

10. a Kelvin scale, absolute zero.

The Kelvin scale runs to absolute zero which is the lowest theoretical temperature. This measures 0 Kelvins on the Kelvin scale and −273.15°C on the Celsius scale.

Answer:

Chemical energy _ thermal energy

Answer:

false

Explanation:

because its made in the mitochondria

Answer:

A general guideline to determine if oxide is acidic, basic, or amphoteric is to use the periodic table. Typically, metals such as Ba form basic oxides (BaO), while nonmetals such as S form acidic oxides (SO3).

Answer:

Ionic bonding is the complete transfer of valence electron(s) between atoms and is a type of chemical bond that generates two oppositely charged ions. By losing those electrons, these metals can achieve noble-gas configuration and satisfy the octet rule. ...

Explanation:

Explanation:

.... have lower melting points.

Answer:

Hot springs are hot because of geothermal heat.  The Hot springs are acidic because hydrogen sulfide and carbon dioxide get in touch with water they evaporate which causes acid.

Explanation:

Ionic and covalent bonds can occur in substances that have a repeating lattice structure.

Ionic bonds are formed when an atom donates electron (s) to another atom. Covalent bonds, on the other hand, are formed when two atoms share electrons to complete their octet states.

Ionic compounds are formed from a combination of metal and non-metal atoms. They usually have crystalline lattice structures with high melting points.

Covalent compounds are formed between non-metal atoms. They can also have lattice structures but generally have lower melting points because the forces holding the molecules together are weaker.

More on ionic and covalent bonds can be found here: https://brainly.com/question/10777799

#SPJ1

Answer:

Occurs in substances that have a repeating lattice structure

Explanation:

Answer:126.73720999999999

Explanation:

Answer:

126.7 grams/mole of KCl

Answer:

The Lewis dot diagram is supposed to have dots on each side. What's incorrect is that there isn't a dot on the bottom, only the left and right side and the top. What's correct about this is that there are 5 outer valence electrons, and they correctly put 5 dots, even though they're in the wrong place.

Explanation:

The given Lewis dot diagram of nitrogen is correct for the number of valence electrons for nitrogen. However, they are not correctly placed because two of them are lone pairs and only these two are shown as paired. Remaining three electrons have to be represented as single electrons.

Lewis dot structure of an element represent its valence electrons shown  as dots around the atom. The lone pair of electrons are shown as paired dots and other electrons as single dots.

For compounds, a Lewis diagram shows the bonded and non bonded electrons between bonded atoms. Nitrogen is 7th element and it contains 7 electrons in which 5 are valence electrons.

Nitrogen contains one lone pair of electrons. They have to be shown as paired dots in the Lewis structure. In the given diagram there are two pairs of electrons which is incorrect. Three electrons have to be shown as single dots.

To find more on Lewis dots, refer here:

https://brainly.com/question/20300458

#SPJ2

Answer:

630 grams

Explanation:

140/80 = 1.75

360 times 1.75 = 630

Answer:

161.69×10²³ molecules

Explanation:

Given data:

Volume of water = 499.8 mL

Density of water = 0.967 g/mL

Number of molecules of water = ?

Solution:

First of all we will calculate the mass of water.

Density = mass/volume

0.967 g/mL = mass/499.8 mL

Mass = 0.967 g/mL × 499.8 mL

Mass = 483.3 g

Number of moles of water:

Number of moles = mass/molar mass

Number of moles =  483.30 g / 18 g/mol

Number of moles = 26.85 mol

1 mole contain 6.022×10²³ molecules

26.85 mol ×6.022×10²³ molecules / 1mol

161.69×10²³ molecules

Answer:

density of water at 4.00c  is 0.967 g/mL. Volume of water=499.8mL

Mass of water=density x volume= 0.967 x 499.8=483.3066g

Number of moles of water molecules in given of water = givenmass/molarmass=483.3066/18=26.85

we know that 1 mole has 6.022 x 1023  molecules of water  

so  the number of water=6.022 x 1023  x 26.85=161.69 x 1023 =1.62 x 1025  molecules of water is its upto 3 significant figure.

Explanation:

Answer:

ILL GIVE BRAINLIEST I NEED THE ANSWER RIGHT AWAY PLEASE SOMEONE

For each of the following processes that show the formation of ions, complete the process by indicating

the number of electrons that must be gained or lost

to form the ion. Indicate the total number of electrons in the ion, and in the atom from which it was

made.

a. Al S Al3 d. F S F

b. S S S2 e. Zn S Zn2

c. Cu S Cu f. P S P3

77. For each of the following atomic

Explanation:

ILL GIVE BRAINLIEST I NEED THE ANSWER RIGHT AWAY PLEASE SOMEONE

For each of the following processes that show the formation of ions, complete the process by indicating

the number of electrons that must be gained or lost

to form the ion. Indicate the total number of electrons in the ion, and in the atom from which it was

made.

a. Al S Al3 d. F S F

b. S S S2 e. Zn S Zn2

c. Cu S Cu f. P S P3

77. For each of the following atomic

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the correct option is option B that is Ethylamine.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. The name of given molecule is Ethylamine. The functional group that is present in the given molecule is ammine.

Therefore, the correct option is option B that is Ethylamine.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

Shell number

Explanation:

Answer:

V₂ =  1.92 L

Explanation:

Given data:

Initial volume = 0.500 L

Initial pressure =2911 mmHg (2911/760 = 3.83 atm)

Initial temperature = 0 °C (0 +273 = 273 K)

Final temperature = 273 K

Final volume = ?

Final pressure = 1 atm

Solution:

Formula:  

P₁V₁/T₁ = P₂V₂/T₂  

P₁ = Initial pressure

V₁ = Initial volume

T₁ = Initial temperature

P₂ = Final pressure

V₂ = Final volume

T₂ = Final temperature

by putting values,

V₂ = P₁V₁ T₂/ T₁ P₂  

V₂ = 3.83 atm × 0.500 L × 273 K / 273 K × 1 atm

V₂ = 522.795 atm .L. K / 273 K.atm

V₂ =  1.92 L

Answer:A complex biological structure with many interacting parts might appear, at first glance, as if it were originally created in its present form with all its interlocking components fully formed and intact. It doesn’t seem possible that they developed step by step via biological evolution. In Darwin’s Black Box, Michael Behe introduces a term that he and other proponents of Intelligent Design use for this concept: irreducible complexity. No part of an irreducibly complex system has any apparent function except in its relation to the other parts.

Answer:

the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors.

Explanation:

In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

Answer:

well for me it's

Explanation:

The reflection of the seas

Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. Therefore, the correct option is option B that is  average kinetic energy decreases.

It is a energy which is possess by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy. It is not dependent on the type of gases or mass of gases.

Mathematically,

K.E=1/2mv²

Where,

m= mass of particles

v= velocity of particles

Water vapor condenses when it cools. Water undergoes a phase shift, transitioning from the  gas to a liquid. Evaporation is the inverse of condensation. When water vapor begins to cool,  average kinetic energy decreases.

Therefore, the correct option is option B.

Learn more about the average kinetic energy, here:

https://brainly.com/question/22174271

#SPJ2

Answer:

3

Explanation: