Horse kg of grass in 12 days how much how much does he eat in 9 days​

A) The null hypothesis is that the population mean flying time between the two cities is equal to the published time of 56 minutes.

B) If the true mean flying time is 50 minutes, a Type II error can be made.

C) If the true mean flying time is 56 minutes, a Type I error could be made.

A) The null hypothesis is that the population mean flying time between the two cities is equal to the published time of 56 minutes. The alternative hypothesis is that the mean flying duration in the population is not 56 minutes.

H0: μ = 56

Ha: μ ≠ 56

B) If the true mean flying time is 50 minutes, a Type II error can be made. A Type II error occurs when we fail to reject a misleading null hypothesis. In this case, failing to reject the null hypothesis (that the population mean flying time is equal to 56 minutes) when the true mean is actually 50 minutes would be a Type II error. The probability of making a Type II error depends on the significance level of the test, the sample size, and the variability of the population. In this context, if the true mean is 50 minutes, the error represents that the airline is taking longer to complete the flight compared to the advertised time.

C) If the true mean flying time is 56 minutes, a Type I error could be made. When we reject the true null hypothesis, we make a Type I error. In this case, rejecting the null hypothesis (that the population mean flying time is equal to 56 minutes) when the true mean is actually 56 minutes would be a Type I error. The probability of making a Type I error depends on the significance level of the test. In this context, if the true mean is 56 minutes, the error represents that the airline is taking less time to complete the flight than the advertised time.

Learn more about Null Hypothesis here

https://brainly.com/question/28920252

#SPH4

If the margin of error is 4.6, the interval estimate would be the point estimate plus or minus 4.6.

In statistical estimation, the margin of error represents the maximum amount by which the point estimate may deviate from the true population parameter. It provides a measure of the precision or uncertainty associated with the estimate. When constructing a confidence interval, the margin of error is used to determine the range within which the true parameter is likely to fall.

To obtain the interval estimate, we add and subtract the margin of error from the point estimate. Let's denote the point estimate as x bar. Therefore, the interval estimate can be expressed as X bar ± 4.6, where ± denotes the range above and below the point estimate.

In summary, if the margin of error in an interval estimate of μ is 4.6, the interval estimate is given by the point estimate plus or minus 4.6. This range captures the likely range of values for the true population parameter μ.

Learn more about margin of error here:

https://brainly.com/question/31950158

#SPJ11

The probability that the mean cholesterol value for the group will be between 145 and 165 is 0.9545 or 95.45%.

In exercise 5.2.4, we were given that the cholesterol levels of 12 to 14-year-old children in a population are normally distributed with a mean of 155 mg/dl and a standard deviation of 10 mg/dl.

(a) To find the probability that the mean cholesterol value for the group will be between 145 and 165, we need to calculate the z-scores for these values and find the area under the standard normal distribution curve between these z-scores.

The z-score for a sample mean can be calculated as:

z = (x - μ) / (σ / √n)

where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size.

For x = 145, μ = 155, σ = 10, and n = 16, we have:

z = (145 - 155) / (10 / √16) = -2

For x = 165, μ = 155, σ = 10, and n = 16, we have:

z = (165 - 155) / (10 / √16) = 2

Using a standard normal distribution table or a calculator, the area under the curve between z = -2 and z = 2 is approximately 0.9545.

Learn more about probability at: brainly.com/question/32117953

#SPJ11

The standard error of the estimate for the given data is approximately 327.29. This value represents the average distance between the observed crime rate values and the predicted values based on the regression model, taking into account the variability in the data. A lower standard error indicates a more accurate estimate.  Answer :  327.29.

To calculate the standard error of the estimate, we need the sum of squares of residuals (SSE) and the number of observations (n). The standard error of the estimate (SE) is given by the square root of SSE divided by (n-2).

Given SSE = 4,182,663, we need to determine the value of n. The problem states that there is a sample of 41 New England cities, so n = 41.

Now we can calculate the standard error of the estimate (SE):

SE = sqrt(SSE / (n - 2))

  = sqrt(4,182,663 / (41 - 2))

  = sqrt(4,182,663 / 39)

  ≈ sqrt(107,045.62)

  ≈ 327.29

Therefore, the standard error of the estimate is approximately 327.29.

Learn more about SSE  : brainly.com/question/31388119

#SPJ11

The explanation of the Chebyshev inequality applied to a normal distribution with zero mean and a variance of 4. It helps us estimate how likely it is for a value to be far away from the mean in terms of standard deviations. Here's a concise explanation:

The Chebyshev inequality is a useful tool for estimating the probability of a random variable falling within a certain range, regardless of the distribution. For a random variable X with mean μ (in this case, 0) and variance σ^2 (in this case, 4), the inequality states:
P(|X - μ| ≥ kσ) ≤ 1/k^2, where k is a positive constant.
Since we have a normal distribution with a mean (μ) of 0 and variance (σ^2) of 4, the standard deviation (σ) is equal to the square root of the variance, which is 2. Applying the Chebyshev inequality to this case, we have:
P(|X - 0| ≥ k(2)) ≤ 1/k^2
Simplifying, we get:
P(|X| ≥ 2k) ≤ 1/k^2
This inequality provides an upper bound for the probability that a value of the random variable X falls outside the range of ±2k, where k is any positive constant.

Learn more about Chebyshev inequality here:

https://brainly.com/question/30928440

#SPJ11

(a) To determine how fast the population is growing when it reaches 5 million people, we can substitute P(t) = 5 into the differential equation P'(t) = 0.06P(t). This gives us P'(t) = 0.06(5) = 0.3 million people per year. Therefore, the population is growing at a rate of 0.3 million people per year when it reaches 5 million people.

(b) To determine the population size when it is growing at a rate of 700,000 people per year, we can set P'(t) = 700,000 and solve for P(t). From the given differential equation, we have 0.06P(t) = 700,000, which implies P(t) = 700,000/0.06 = 11,666,666.67 million people. Therefore, the population size is approximately 11.67 million people when it is growing at a rate of 700,000 people per year.

(c) To find a formula for P(t), we can solve the differential equation P'(t) = 0.06P(t). This is a separable differential equation, and integrating both sides gives us ln(P(t)) = 0.06t + C, where C is the constant of integration. By exponentiating both sides, we get P(t) = e^(0.06t+C). Using the initial condition P(0) = 3, we can find the value of C. Substituting t = 0 and P(0) = 3 into the equation, we have 3 = e^C. Therefore, the formula for P(t) is P(t) = 3e^(0.06t).

Learn more about integration here: brainly.com/question/32386391

#SPJ11

Answer of each statement is described below.

In the given figure,

We can see that,

In the graph X- axis represents the time

And Y- axis represents the height gain by rock.

The curve is passing through (0, 53), (4, 85) and (10.5, 0)

Now from figure we can observe that,

Learn more about the coordinate visit:

https://brainly.com/question/24394007

#SPJ1

Jack and Jill are approximately 9.08 km apart after an hour. To find out how far apart Jack and Jill are, we will use the law of cosines.

Which states that the square of the length of one side of a triangle is equal to the sum of the squares of the other two sides minus twice their product multiplied by the cosine of the angle between them.

Let us represent the distance between Jack and Jill after an hour by d.

We also know that Jack has walked 4.5 km and Jill has walked 6 km.

Let’s begin by finding the length of the side opposite Jack, which we will call a:

cos(150°) = adj/hypcos(150°)

= a/4.5a

= 4.5 cos(150°)a

= -3.8971 km (since cosine is negative in the second quadrant)

Next, we will find the length of the side opposite Jill, which we will call b:

cos(150°) = adj/hypcos(150°)

= b/6b

= 6 cos(150°)b

= -5.1962 km (since cosine is negative in the second quadrant)

Now we can find the distance between Jack and Jill by using the law of cosines:

d² = a² + b² - 2ab cos(C)d²

= (-3.8971)² + (-5.1962)² - 2(-3.8971)(-5.1962)cos(150°)d²

= 15.1664 + 27 - (-40.3458)d²

= 82.5118d ≈ 9.08 km

Therefore, Jack and Jill are approximately 9.08 km apart after an hour.

To know more about law of cosines, visit:

https://brainly.com/question/30766161

#SPJ11

The cube of the difference of 5 times the square of y and 7 all divided by the square of 2 times y is interpretation of expression (5y²-7)³/(2y)²

The given expression is (5y²-7)³/(2y)²

We have to find the interpretation which represents the given expression

y is the variable in the expression.

Minus shows the difference between two terms

The cube of the difference of 5 times the square of y and 7 all divided by the square of 2 times y

To learn more on Expressions click:

https://brainly.com/question/14083225

#SPJ

(a) The critical value for a 90% confidence level can be found by looking up the corresponding value in the standard normal distribution table or by using technology such as statistical software.

In this case, the critical value for a 90% confidence level is approximately 1.76 (rounded to two decimal places).

(b) The point estimate represents the best estimate of the population parameter based on the sample data. In this case, the point estimate would be the sample mean (x-bar). Since the population mean (μ) is not given, we can use the sample mean as an estimate. The sample mean is denoted as (x-bar), which is equal to the mean of the sample data. However, the sample data is not provided in the question, so we cannot calculate the exact point estimate.

(c) The margin of error represents the maximum likely difference between the point estimate and the true population parameter. It is calculated by multiplying the critical value by the standard deviation of the sample (s) divided by the square root of the sample size (n). In this case, the margin of error can be calculated as follows: Margin of Error = Critical Value * (s / √n) = 1.76 * (5.97 / √15) ≈ 3.65 (rounded to two decimal places).

(d) The 90% confidence interval can be calculated by adding and subtracting the margin of error from the point estimate. Since the point estimate is not provided in the question, we cannot calculate the exact confidence interval. However, if we had the point estimate (x-bar), the 90% confidence interval would be given by: Confidence Interval = (x-bar - Margin of Error, x-bar + Margin of Error).

Learn more about population here: https://brainly.com/question/15020296

#SPJ11

it is not feasible for Trudy to compute the hashes of all possible passwords.

Let's first calculate the total number of possible passwords, which is given by the formula:

Number of possible passwords = (Number of possible characters)^Number of characters

Substituting the given values, we get:

Number of possible passwords = (128)⁸ = 3.4028237 × 10³⁸

Next, let's calculate the probability that a randomly selected password is in Trudy's dictionary. The probability that a password is not in her dictionary is 1 - 1/4 = 3/4.

Therefore, the probability that a password is not in her dictionary for all 230 passwords is (3/4)²³⁰. Hence, the probability that at least one password is in her dictionary is:

1 - (3/4)²³⁰≈ 1

This means that it is very likely that at least one password in the password file is in Trudy's dictionary.

Now, let's assume that Trudy can compute 10⁶ hashes per second. To compute the hashes of all 210 passwords in the file, Trudy needs:

210 × 10⁶ = 2.1 × 10⁸ hashes

To compute the hashes of all possible passwords, Trudy needs:

3.4028237 × 10³⁸/ 10⁶ ≈ 3.4 × 10³² seconds

This is an incredibly large number of seconds, far more than the age of the universe. Therefore, it is not feasible for Trudy to compute the hashes of all possible passwords.

Learn more about Trudy's dictionary

brainly.com/question/8505105

#SPJ11

The value of y that satisfies the equation is 3.35 or - 5.35.

The value of y that satisfies the equation is calculated as follows;

The given equation;

√ (y + 3) + √ ( y - 2) = 5

Square both sides of the equations as follows;

[√ (y + 3) + √ ( y - 2) ]² = 5²

y + 3 + 2(y + 3)(y - 2) + y - 2 = 25

2y + 1   +   2(y² + y - 6) = 25

2y + 1 + 2y² + 2y - 12 = 25

Collect similar terms and simplify the equation;

2y²  +  4y - 36 = 0

divide through by 2;

y² + 2y - 18 = 0

Solve the quadratic equation using formula method as follows;

a = 1, b = 2, c = -18

y = 3.35 or - 5.35

Learn more about quadratic equation here: https://brainly.com/question/1214333

#SPJ1

The following policies can redistribute income across generations in different ways:1. Social Security: This policy redistributes income from younger workers to older retirees. Workers pay into the Social Security system throughout their working lives and receive benefits when they retire. The amount of benefits received is based on the worker's earnings history, with higher earners receiving more benefits.

The system is designed to provide a safety net for retirees, but it also transfers wealth from younger generations to older ones.2. Inheritance Taxes: Inheritance taxes are levied on the assets of deceased individuals and can redistribute income from older generations to younger ones. By taxing large inheritances, the government can collect revenue to fund programs that benefit younger generations, such as education or healthcare. The tax can also reduce the concentration of wealth among older generations and increase opportunities for younger ones.3. Education Subsidies: Education subsidies can redistribute income from older generations to younger ones. By providing funding for education, the government can help young people acquire the skills and knowledge they need to succeed in the workforce. This can lead to higher earnings and greater economic mobility. Additionally, education subsidies can reduce the burden of student loan debt on younger generations.Overall, these policies can redistribute income across generations in different ways. Social Security transfers wealth from younger generations to older ones, while inheritance taxes and education subsidies can transfer wealth from older generations to younger ones.

Learn more about policies here

https://brainly.com/question/6583917

#SPJ11

Table 13-9 provides information about the production function and costs of a firm. The table shows the quantities of labor (L) and capital (K) that the firm uses to produce different levels of output (Q). The table also presents information on the total variable cost (TVC) and total fixed cost (TFC) of production for each level of output.

To determine the total cost curve for this firm, we need to add the total variable cost (TVC) and total fixed cost (TFC) for each level of output. The total cost (TC) for a given level of output can be calculated using the formula:
TC = TVC + TFC
For example, when the firm produces 10 units of output, the TVC is $300, and the TFC is $400. Therefore, the total cost (TC) for producing 10 units of output is $700 ($300 + $400). By repeating this calculation for each level of output, we can create a table that shows the total cost of production at each level of output. We can then plot these data points on a graph to create the firm's total cost curve.
In summary, to create the total cost curve for the firm in Table 13-9, we need to add the total variable cost (TVC) and total fixed cost (TFC) for each level of output and plot the resulting data points on a graph.

Learn more about quantities here

https://brainly.com/question/26044328

#SPJ11

The circuit can be implemented using multiple components such as AND gates, OR gates, NOT gates, and multipliers. The detailed implementation of the circuit depends on the available components and design goals, and can be done using a logic simulator or a hardware description language (HDL) such as VHDL or Verilog.

To design a circuit that determines if a binary number between 0 and 15 is a prime number, we need to check if the input binary number is divisible by any number other than 1 and itself.

We can do this by dividing the input number by all the numbers between 2 and the square root of the input number. If none of the divisions are exact, then the input number is a prime number.

The circuit can be implemented using multiple components such as AND gates, OR gates, NOT gates, and multipliers.

Here's one possible logic circuit to determine if a binary number between 0 and 15 is a prime number:

Convert the input binary number into a decimal number.

If the input number is 0 or 1, output 0 (not a prime number).

If the input number is 2, output 1 (a prime number).

Generate a sequence of all the odd numbers between 3 and the square root of the input number. For example, if the input number is 9, the sequence would be 3, 5.

Multiply the input number by each number in the sequence generated in step 4, using a multiplier circuit.

If any of the products are equal to the input number, output 0 (not a prime number). Otherwise, output 1 (a prime number).

for such more question on circuit

https://brainly.com/question/14587073

#SPJ11

To design a logic circuit to determine if a binary number between 0 and 15 is a prime number, we can use the following steps:

Convert the binary number to decimal.

Check if the decimal number is less than 2 or equal to 2. If so, the number is prime. If not, go to step 3.

Check if the decimal number is even. If so, the number is not prime. If not, go to step 4.

Finally, we can combine the outputs from steps 2 and 3 with an OR gate, and then combine the output of the OR gate with the output of step 4 with another AND gate to obtain the final output (1 for prime, 0 for not prime).

Learn more about logic here : brainly.com/question/2141979

#SPJ11

The solution set of the quadratic inequality [tex]x^2 + 1[/tex] ≤  [tex]0[/tex] is an empty set, or no solution.

To find the solution set of the quadratic inequality [tex]x^2 + 1[/tex] ≤ [tex]0[/tex], we need to determine the values of x that satisfy the inequality.

The quadratic expression [tex]x^2 + 1[/tex] represents a parabola that opens upward. However, the inequality states that the expression is less than or equal to zero. Since the expression [tex]x^2 + 1[/tex] is always positive or zero (due to the added constant 1), it can never be less than or equal to zero.

Therefore, there are no values of x that satisfy the inequality [tex]x^2 + 1[/tex] ≤ [tex]0[/tex]. The solution set is an empty set, indicating that there are no solutions to the inequality.

In summary, the solution set of the quadratic inequality [tex]x^2 + 1[/tex] ≤ 0 is an empty set, or no solution.

Learn more about quadratic here:

https://brainly.com/question/30398551

#SPJ11

Chen did not earn a bonus for his journey because his fuel efficiency was below the required threshold of 2.8 kilometers per liter.

To determine whether Chen earned a bonus for his journey, we need to calculate his fuel efficiency in kilometers per liter. Fuel efficiency can be calculated by dividing the total distance traveled by the amount of fuel used.

First, let's calculate the total distance traveled. We can do this by multiplying the average speed by the journey time:

Total distance = Average speed * Journey time = 61 km/hr * 4.5 hours = 274.5 km

Next, we divide the total distance by the fuel used to calculate the fuel efficiency:

Fuel efficiency = Total distance / Fuel used = 274.5 km / 96 liters ≈ 2.86 km/l

The calculated fuel efficiency is approximately 2.86 kilometers per liter. Since this value is above the required threshold of 2.8 kilometers per liter, Chen did not earn a bonus for his journey.

Therefore, based on the given information, Chen did not earn a bonus for his journey because his fuel efficiency was below the required threshold of 2.8 kilometers per liter.

Learn more about kilometers here:

https://brainly.com/question/13987481

#SPJ11

Tim earned approximately $20.67 for each car he washed.

If Tim earned $124 by washing 6 cars and earned the same amount for each car, we can determine the amount he earned for each car by dividing the total amount earned by the number of cars.

To find the amount Tim earned for each car, we divide $124 by 6:

$124 / 6 = $20.67 (rounded to the nearest cent)

Hence, Tim earned approximately $20.67 for each car he washed. This means that the total amount of $124 is evenly distributed among the 6 cars, resulting in an equal payment of $20.67 for each car.

Learn more about approximation here:

https://brainly.com/question/16315366

#SPJ11

The number of radioactive nuclei decreases exponentially over time, with a half-life of ln(2)/λ.

A differential equation is a mathematical equation that relates the rate of change of a quantity to its current value. In the case of 3H, the rate of change of the number of radioactive nuclei (N) is given by the differential equation:

dN/dt = -λN

where λ is the decay constant, which is a measure of how quickly the nuclei decay. The negative sign indicates that the number of radioactive nuclei decreases over time.

Integrating this differential equation gives:

ln(N) = -λt + C

where C is a constant of integration that depends on the initial conditions. Taking the exponential of both sides of this equation gives:

N = [tex]e^{-\lambda t + C}[/tex] =  [tex]e^C e^{-\lambda t}[/tex]

Using the initial condition that 100 mg of 3H decays to 50 mg in 1 hour, we can solve for C:

50 =  [tex]e^C e^{-\lambda t}[/tex]

C = ln(50) + λ

Substituting this value of C into the equation for N gives:

N = [tex]e^{ln(50)+\lambda} e^{-\lambda t}[/tex] = 50 [tex]e^{-\lambda t}[/tex]

This is the solution to the differential equation for the decay of 3H.

To know more about differential equation here

https://brainly.com/question/31583235

#SPJ4

The object will reach the maximum height of 136 feet after 1.5 seconds from the launch. This can be verified from the graph as well where the vertex represents the maximum point on the parabola.

The function h(t)= ‑16t2 + 48t + 160 can be used to model the height, in feet, of an object t seconds after it is launched from the top of a building that is 160 feet tall.Let’s first understand the given function to solve the question:h(t)= ‑16t2 + 48t + 160 represents the height of an object that is launched from a building at 160 feet above the ground.

The function h(t) is a quadratic function of the form: h(t) = ax2 + bx + c where a = ‑16, b = 48, and c = 160. Since the leading coefficient (a) is negative, the quadratic function represents a downward opening parabola. The vertex of the parabola is located at t = ‑b/2a. So, the time when the object reaches the maximum height can be found using this formula as:-b/2a = -48/(2 × (-16))= 1.5 secondsThis means the object will reach the maximum height after 1.5 seconds from the launch. Now, to calculate the maximum height, we will plug this value of time into the original equation of h(t) as:h(1.5) = ‑16(1.5)2 + 48(1.5) + 160= 136 feet.

Therefore, the object will reach the maximum height of 136 feet after 1.5 seconds from the launch. This can be verified from the graph as well where the vertex represents the maximum point on the parabola. The graph of the function is shown below: Graph of the function.

Learn more about Objects here,Explain how objects are used in Object-oriented

programming

https://brainly.com/question/28732193

#SPJ11

To find the estimated mean consumption level for an economy with GDP equal to $2 billion and an aggregate price index of 90, we'll use the formula: Mean Consumption = (GDP / Aggregate Price Index) * 100.

To answer this question, we need to refer to Table 1 which provides information on consumption levels based on different combinations of GDP and aggregate price index. The term "mean" refers to the average consumption level for an economy with the given GDP and price index.

Looking at the table, we can see that for an economy with GDP of $2 billion and an aggregate price index of 90, the estimated mean consumption level is $4.75 billion. Therefore, the answer is c. $4.75 billion.

To know more about mean visit:

https://brainly.com/question/1136789

#SPJ11

The terminal point of sin t, cost, and tan t is:

sin t = 3/5
cos t = 4/5
tan t = 3/4


To find sin t, cos t, and tan t for the terminal point P(x, y) = (4/5, 3/5) determined by a real number t, we need to use the trigonometric ratios of sine, cosine, and tangent.

First, we need to find the values of x and y from the given coordinates of P. Since P is on the unit circle, we know that the distance from the origin to P is 1.

Therefore, we can use the Pythagorean theorem to find the value of the missing side:
x^2 + y^2 = 1^2
(4/5)^2 + (3/5)^2 = 1
16/25 + 9/25 = 1
25/25 = 1

So, x = 4/5 and y = 3/5.

Next, we can use the definitions of sine, cosine, and tangent to find their values for t:
sin t = y/1 = 3/5
cos t = x/1 = 4/5
tan t = y/x = (3/5)/(4/5) = 3/4

Then, we obtain:
sin t = 3/5
cos t = 4/5
tan t = 3/4

Know more about the terminal point  here:

https://brainly.com/question/1621860

#SPJ11

A recursive definition for the set of all strings of a's and b's with odd lengths is:Base case: S(1) = {a, b}
Recursive case: S(n) = {as | s ∈ S(n-2), a ∈ {a, b}}

To create a recursive function for this set, we start with a base case, which is the set of all strings of length 1, consisting of either 'a' or 'b'. This is represented as S(1) = {a, b}.

For the recursive case, we define the set S(n) for odd lengths n as the set of strings formed by adding either 'a' or 'b' to each string in the set S(n-2).

By doing this, we ensure that all strings in the set have odd lengths, since adding a character to a string with an even length results in a string with an odd length. This process is repeated until we have generated all possible strings of a's and b's with odd lengths.

To know more about recursive function click on below link:

https://brainly.com/question/30027987#

#SPJ11

This comparison is based on general Trends, and there can be exceptions and variations depending on specific circumstances and other factors.

To determine the species with the smallest radius among the given options, we need to consider the electronic configuration and the position of the species in the periodic table.In general, as we move from left to right across a period in the periodic table, the atomic radius decreases due to an increase in effective nuclear charge. Similarly, as we move down a group, the atomic radius generally increases due to the addition of new energy levels.Let's analyze the given options:

A. N-5: This represents a nitrogen ion with a charge of -5. Since nitrogen is in group 15, adding 5 extra electrons would result in a larger electron cloud and an increased atomic radius compared to neutral nitrogen.

B. N-2: This represents a nitrogen ion with a charge of -2. Similar to option A, adding 2 extra electrons would result in a larger electron cloud and an increased atomic radius compared to neutral nitrogen.

C. N0: This represents neutral nitrogen. Nitrogen has 7 electrons, and its atomic radius can be considered as a reference point.

D. N+1: This represents a nitrogen ion with a charge of +1. Losing one electron would result in a smaller electron cloud and a decreased atomic radius compared to neutral nitrogen.

E. N+3: This represents a nitrogen ion with a charge of +3. Similarly, losing three electrons would result in an even smaller electron cloud and a further decreased atomic radius compared to neutral nitrogen.

Based on this analysis, the species with the smallest radius among the given options is:

D. N+1 (Nitrogen ion with a charge of +1) that this comparison is based on general trends, and there can be exceptions and variations depending on specific circumstances and other factors.
To know more about Trends.

https://brainly.com/question/30104703

#SPJ11

The species with the smallest radius is N-5, which has an additional five electrons compared to neutral nitrogen (N0). The other species listed have fewer electrons and thus larger radii. So the correct answer is A. N-5.

As we move from left to right across a period in the periodic table, the atomic radius decreases due to increased effective nuclear charge. Similarly, as we move from top to bottom within a group, the atomic radius increases due to the increase in the number of electron shells.

In this case, we are comparing species within the same element (nitrogen) but with different numbers of electrons. Since adding electrons to an atom increases its effective nuclear charge, the radius will generally decrease with increasing negative charge and increase with increasing positive charge.

Know more about smallest radius here;

https://brainly.com/question/31148778

#SPJ11

The appropriate test procedure is c) z-test of the proportion.

To determine if the rate of incorrectly priced items has changed, we need to compare the observed proportion (20/1,034) to the expected proportion (1%).

Since we are dealing with proportions, the appropriate test procedure is the z-test of the proportion.

This test allows us to assess whether the observed proportion significantly differs from the expected proportion, indicating a change in the rate of incorrectly priced items.

To conduct the z-test of the proportion, we follow these steps:

It represents the threshold beyond which we reject the null hypothesis.

If the test statistic does not fall within the critical region, we fail to reject the null hypothesis.

In this case, by calculating the test statistic (z-score) using the given values, and comparing it to the critical value from the standard normal distribution table,

We can determine whether the rate of incorrectly priced items has changed significantly.

Learn more about z-test.

brainly.com/question/30109604

#SPJ11

The major that is LEAST likely to be Tom's college major is a. Engineering.

Tom's interest in reading about the history of ancient civilizations and discussing the themes of the books he reads with others suggests that he is most likely interested in pursuing a major in the humanities or social sciences. Therefore, the major that is LEAST likely to be Tom's college major is a. Engineering. Engineering is a major that is typically focused on technical skills and problem-solving in areas such as mathematics and physics, which may not align with Tom's interests and strengths. The other options, East Asian Studies, Political Science, History, and Psychology, are all majors that would allow Tom to explore his interests in history and civilization in more depth.

Learn more about Engineering here

https://brainly.com/question/28321052

#SPJ11

The correct statement about the solution of system of inequalities is:

Values that satisfy either y > 3x + 1 or y < 3x – 3 are solutions.

Given inequality:

y > 3x + 1

y < 3x – 3

Now the equation of the given inequalities are:

y = 3x + 1

y = 3x - 3

Now from the points through which lines are passing,

Line 1: (-2,-5) and (0,1) .

Line 2 : (0,-3) and (1,0) .

Form the intersecting region of the two lines .

Thus the values that satisfy either y > 3x + 1 or y < 3x – 3 are solutions.

Know more about inequalities in lines,

https://brainly.com/question/31511107

#SPJ1

Answer:

(a) The expected life of the part is E(t) = 4 months.

(b) E([tex]t^{2}[/tex]) = 8, and:

Var(t) = E([tex]t^{2}[/tex]) - [tex](E(t))^{2}[/tex] = 8 - [tex]4^{2}[/tex] = 8 - 16 = -8

(c) P(t < 4) =  [tex]\int\limits^4_0[/tex] [tex]\frac{1}{2}[/tex] [tex]e^{\frac{-1}{2t} }[/tex]dt

Step-by-step explanation:

(a) The expected life of the part can be found by calculating the mean of the probability density function:

E(t) = ∫₀^∞ t f(t) dt = ∫₀^∞ t [tex]\frac{1}{2}[/tex] [tex]e^{\frac{-1}{2t} }[/tex]dt

This integral can be evaluated using integration by parts:

Let u = t and dv/dt = e^(-1/2t)

Then du/dt = 1 and v = -2e^(-1/2t)

Using the formula for integration by parts, we have:

∫₀^∞ t (1/2) e^(-1/2t) dt = [-2t e^(-1/2t)]₀^∞ + 2∫₀^∞ e^(-1/2t) dt

= 0 + 2(2) = 4

Therefore, the expected life of the part is E(t) = 4 months.

(b) The variance of the distribution can be found using the formula:

Var(t) = ∫₀^∞ (t - E(t))^2 f(t) dt

Substituting E(t) = 4 and f(t) = (1/2) e^(-1/2t), we have:

Var(t) = ∫₀^∞ (t - 4)^2 (1/2) e^(-1/2t) dt

This integral can be evaluated using integration by parts again, or by recognizing that it is the second moment of the distribution. Using the second method:

Var(t) = E(t^2) - (E(t))^2

To find E(t^2), we can evaluate the integral:

E(t^2) = ∫₀^∞ t^2 (1/2) e^(-1/2t) dt

Again, using integration by parts:

Let u = t^2 and dv/dt = e^(-1/2t)

Then du/dt = 2t and v = -2e^(-1/2t)

Using the formula for integration by parts, we have:

∫₀^∞ t^2 (1/2) e^(-1/2t) dt = [-2t^2 e^(-1/2t)]₀^∞ + 2∫₀^∞ t e^(-1/2t) dt

= 0 + 2(4) = 8

Therefore, E(t^2) = 8, and:

Var(t) = E(t^2) - (E(t))^2 = 8 - 4^2 = 8 - 16 = -8

Since the variance cannot be negative, we have made an error in our calculations. One possible source of error is that we assumed that the integral ∫₀^∞ (t - 4)^2 (1/2) e^(-1/2t) dt converges, when it may not. Another possibility is that the given probability density function is not a valid probability density function.

(c) The probability that a part lasts less than the mean number of months is given by:

P(t < E(t)) = ∫₀^E(t) f(t) dt

Substituting E(t) = 4 and f(t) = (1/2) e^(-1/2t), we have:

P(t < 4) = ∫₀^4 (1/2) e^(-1/2t) dt

This integral can be evaluated using integration by parts, or by using a calculator or table of integrals. Using the second

To know more about mean refer here

https://brainly.com/question/31101410#

#SPJ11

The graph of the inequality is the third one, counting from the top.

Here we have the following inequality:

(1/2)n + 3 < 5

First we need to isolate the variable, we will get:

(1/2)n + 3 < 5

(1/2)n < 5 - 3

(1/2)n < 2

n < 2*2

n < 4

So we will have an open circle at n = 4, and an arrow that goes to the left (because n is smaller than 4).

Then the correct number line is the third one, counting from the top.

Learn more about inequalities:

https://brainly.com/question/24372553

#SPJ1